Motorola-Cpe-PRIVATE-MIB: View SNMP OID List / Download MIB

VENDOR: GEMTEK SYSTEMS HOLDING BV


 Home MIB: Motorola-Cpe-PRIVATE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 gemtek 1.3.6.1.4.1.10529
             gemtekDevCpe 1.3.6.1.4.1.10529.300
PMP 320 CPE MIB tree
                     gemtekDevCpeStatus 1.3.6.1.4.1.10529.300.1
                         wirelessStatus 1.3.6.1.4.1.10529.300.1.1
                             gemtekDevCpeWimaxRssi 1.3.6.1.4.1.10529.300.1.1.1 octet string read-only
RSSI Report(dBm)
                             gemtekDevCpeWimaxCinr 1.3.6.1.4.1.10529.300.1.1.2 octet string read-only
CINR Report(dB)
                             gemtekDevCpeWimaxTxPower 1.3.6.1.4.1.10529.300.1.1.3 octet string read-only
Tx Power Report(dBm)
                             gemtekDevCpeWimaxMaxTxPower 1.3.6.1.4.1.10529.300.1.1.4 octet string read-only
MAX Tx Power Report(dBm)
                             gemtekDevCpeWimaxUpLinkModulation 1.3.6.1.4.1.10529.300.1.1.5 octet string read-only
Up Link Modulation Type : QPSK [CC] 1/2 QPSK [CC] 3/4 16-QAM [CC] 1/2 16-QAM [CC] 3/4 64-QAM [CC] 1/2 64-QAM [CC] 2/3 64-QAM [CC] 3/4 QPSK [BTC] 1/2 QPSK [BTC] 3/4 16-QAM [BTC] 3/5 16-QAM [BTC] 4/5 64-QAM [BTC] 5/8 64-QAM [BTC] 4/5 QPSK [CTC] 1/2 Reserved QPSK [CTC] 3/4 16-QAM [CTC] 1/2 16-QAM [CTC] 3/4 64-QAM [CTC] 1/2 64-QAM [CTC] 2/3 64-QAM [CTC] 3/4 64-QAM [CTC] 5/6 QPSK [ZT CC] 1/2 QPSK [ZT CC] 3/4 16-QAM [ZT CC] 1/2 16-QAM [ZT CC] 3/4 64-QAM [ZT CC] 1/2 64-QAM [ZT CC] 2/3 64-QAM [ZT CC] 3/4 QPSK [LDPC] 1/2 QPSK [LDPC] 2/3 A code QPSK [LDPC] 3/4 A code 16-QAM [LDPC] 1/2 16-QAM [LDPC] 2/3 A code 16-QAM [LDPC] 3/4 A code 64-QAM [LDPC] 1/2 64-QAM [LDPC] 2/3 A code 64-QAM [LDPC] 3/4 A code QPSK [CC with optional interleaver] 1/2 QPSK [CC with optional interleaver] 3/4 16-QAM [CC with optional interleaver] 1/2 16-QAM [CC with optional interleaver] 3/4 64-QAM [CC with optional interleaver] 2/3 64-QAM [CC with optional interleaver] 3/4 QPSK [LDPC] 5/6 16-QAM [LDPC] 5/6 64-QAM [LDPC] 5/6
                             gemtekDevCpeWimaxDownLinkModulation 1.3.6.1.4.1.10529.300.1.1.6 octet string read-only
Down Link Modulation Type : QPSK [CC] 1/2 QPSK [CC] 3/4 16-QAM [CC] 1/2 16-QAM [CC] 3/4 64-QAM [CC] 1/2 64-QAM [CC] 2/3 64-QAM [CC] 3/4 QPSK [BTC] 1/2 QPSK [BTC] 3/4 or 2/3 16-QAM [BTC] 3/5 16-QAM [BTC] 4/5 64-QAM [BTC] 2/3 or 5/8 64-QAM [BTC] 5/6 or 4/5 QPSK [CTC] 1/2 Reserved QPSK [CTC] 3/4 16-QAM [CTC] 1/2 16-QAM [CTC] 3/4 64-QAM [CTC] 1/2 64-QAM [CTC] 2/3 64-QAM [CTC] 3/4 64-QAM [CTC] 5/6 QPSK [ZT CC] 1/2 QPSK [ZT CC] 3/4 16-QAM [ZT CC] 1/2 16-QAM [ZT CC] 3/4 64-QAM [ZT CC] 1/2 64-QAM [ZT CC] 2/3 64-QAM [ZT CC] 3/4 QPSK [LDPC] 1/2 QPSK [LDPC] 2/3 A code QPSK [LDPC] 3/4 A code 16-QAM [LDPC] 1/2 16-QAM [LDPC] 2/3 A code 16-QAM [LDPC] 3/4 A code 64-QAM [LDPC] 1/2 64-QAM [LDPC] 2/3 A code 64-QAM [LDPC] 3/4 A code QPSK [LDPC] 2/3 B code QPSK [LDPC] 3/4 B code 16-QAM [LDPC] 2/3 B code 16-QAM [LDPC] 3/4 B code 64-QAM [LDPC] 2/3 B code 64-QAM [LDPC] 3/4 B code QPSK [CC with optional interleaver] 1/2 QPSK [CC with optional interleaver] 3/4 16-QAM [CC with optional interleaver] 1/2 16-QAM [CC with optional interleaver] 3/4 64-QAM [CC with optional interleaver] 2/3 64-QAM [CC with optional interleaver] 3/4 QPSK [LDPC] 5/6 16-QAM [LDPC] 5/6 64-QAM [LDPC] 5/6
                             gemtekDevCpeWimaxBsid 1.3.6.1.4.1.10529.300.1.1.7 octet string read-only
Base Station MAC Address
                             gemtekDevCpeWimaxFrequency 1.3.6.1.4.1.10529.300.1.1.8 unsigned32 read-only
Center Frequency (kHz)
                             gemtekDevCpeWimaxUpLinkDataRate 1.3.6.1.4.1.10529.300.1.1.9 octet string read-only
Up Link Data Rate Report(Kbps)
                             gemtekDevCpeWimaxDownLinkDataRate 1.3.6.1.4.1.10529.300.1.1.10 octet string read-only
Down Link Data Rate Report(Kbps)
                             gemtekDevCpeWimaxTotalUpLinkDataByte 1.3.6.1.4.1.10529.300.1.1.11 unsigned32 read-only
Total Up Link Data Bytes Report(Bytes)
                             gemtekDevCpeWimaxTotalDownLinkDataByte 1.3.6.1.4.1.10529.300.1.1.12 unsigned32 read-only
Total Down Link Data Bytes Report(Bytes)
                             gemtekDevCpeWimaxCpeState 1.3.6.1.4.1.10529.300.1.1.13 octet string read-only
CPE State
                             gemtekDevCpeWimaxCinrReuse1 1.3.6.1.4.1.10529.300.1.1.14 octet string read-only
CINR Reuse1 Report(dB)
                             gemtekDevCpeWimaxCinrReuse3 1.3.6.1.4.1.10529.300.1.1.15 octet string read-only
CINR Reuse3 Report(dB)
                             gemtekDevCpeWimaxBandwidth 1.3.6.1.4.1.10529.300.1.1.16 integer32 read-only
CPE Bandwidth(kHz)
                             gemtekDevCpeWimaxZoneCinrChannelZero 1.3.6.1.4.1.10529.300.1.1.17 octet string read-only
Zone CINR channel 0 Report(dB)
                             gemtekDevCpeWimaxMimoMode 1.3.6.1.4.1.10529.300.1.1.18 integer read-only
MIMO mode status Enumeration: 'mimoMatrixA': 1, 'siso': 0, 'disconnect': 4, 'mimoMatrixB': 2.
                         networkStatus 1.3.6.1.4.1.10529.300.1.2
                             gemtekDevCpeLanMacAddresss 1.3.6.1.4.1.10529.300.1.2.1 octet string read-only
CPE LAN MAC Address
                             gemtekDevCpeLanTotalDownLinkDataByte 1.3.6.1.4.1.10529.300.1.2.2 unsigned32 read-only
Total Down Link Data Bytes Report(Bytes)
                             gemtekDevCpeLanTotalUpLinkDataByte 1.3.6.1.4.1.10529.300.1.2.3 unsigned32 read-only
Total Up Link Data Bytes Report(Bytes)
                             gemtekDevCpeLanTotalDownLinkDataPackets 1.3.6.1.4.1.10529.300.1.2.4 unsigned32 read-only
LAN Total Down Link Data Packets Report(Packets)
                             gemtekDevCpeLanTotalUpLinkDataPackets 1.3.6.1.4.1.10529.300.1.2.5 unsigned32 read-only
LAN Total Up Link Data Packets Report(Packets)
                             gemtekDevCpeWanMacAddresss 1.3.6.1.4.1.10529.300.1.2.6 octet string read-only
CPE WAN MAC Address
                             gemtekDevCpeWanTotalDownLinkDataPackets 1.3.6.1.4.1.10529.300.1.2.7 unsigned32 read-only
WAN Total Down Link Data Packets Report(Packets)
                             gemtekDevCpeWanTotalUpLinkDataPackets 1.3.6.1.4.1.10529.300.1.2.8 unsigned32 read-only
WAN Total Up Link Data Packets Report(Packets)
                         deviceStatus 1.3.6.1.4.1.10529.300.1.3
                             gemtekDevCpeHardwareModel 1.3.6.1.4.1.10529.300.1.3.1 octet string read-only
Hardware Model of CPE
                             gemtekDevCpeFirmwareVersion 1.3.6.1.4.1.10529.300.1.3.2 octet string read-only
Firmware Version of CPE
                             gemtekDevCpeFirmwareCreationDate 1.3.6.1.4.1.10529.300.1.3.3 octet string read-only
Firmware Creation Date
                             gemtekDevCpeFrequencyRange 1.3.6.1.4.1.10529.300.1.3.4 octet string read-only
Frequency Range of CPE
                             gemtekDevCpeSerialNumber 1.3.6.1.4.1.10529.300.1.3.5 octet string read-only
Serial Number of CPE
                             gemtekDevCpeLatitude 1.3.6.1.4.1.10529.300.1.3.6 octet string read-write
CPE Latitude Report
                             gemtekDevCpeLongitude 1.3.6.1.4.1.10529.300.1.3.7 octet string read-write
CPE Longitude Report
                             gemtekDevCpeHeight 1.3.6.1.4.1.10529.300.1.3.8 octet string read-write
CPE Height Report
                             gemtekDevCpeMibsVersion 1.3.6.1.4.1.10529.300.1.3.9 octet string read-only
MIBs Version of CPE
                             gemtekDevCpeBootromVersion 1.3.6.1.4.1.10529.300.1.3.10 octet string read-only
Bootrom Version of CPE
                             gemtekDevCpeBootromCreationDate 1.3.6.1.4.1.10529.300.1.3.11 octet string read-only
Bootrom Creation Date
                             gemtekDevCpeProductVersion 1.3.6.1.4.1.10529.300.1.3.12 octet string read-only
Product Version of CPE
                     gemtekDevCpeControl 1.3.6.1.4.1.10529.300.2
                         rebootWithResponse 1.3.6.1.4.1.10529.300.2.1 integer read-write
If reading this OID, rebootRequired(1) indicates a reboot is currently required, else, returns rebootNotRequired(0). Enumeration: 'rebootRequired': 1, 'rebootNotRequired': 0, 'reboot': 255.
                         isRebootRequired 1.3.6.1.4.1.10529.300.2.2 integer read-only
If reading this OID, rebootRequired(1) indicates a reboot is currently required, else, returns rebootNotRequired(0). Enumeration: 'rebootRequired': 1, 'rebootNotRequired': 0.
                         autoSaveConfig 1.3.6.1.4.1.10529.300.2.3 integer read-write
OID to enable/disable the system save to flash automatically. Change setting will save configuraition immediately. Set autoSaveConfig = 0 can save configuraition immediately and don't turn on auto save. Enumeration: 'autoSaveEnabled': 1, 'autoSaveDisabled': 0.
                         autoSavePeriod 1.3.6.1.4.1.10529.300.2.4 unsigned32 read-write
The variable is deprecated. An OID to set the auto save period in seconds.
                         startStopWimax 1.3.6.1.4.1.10529.300.2.5 integer read-write
Start/Stop WiMAX Enumeration: 'start': 1, 'stop': 0.
                         snmpBuzzerConfig 1.3.6.1.4.1.10529.300.2.6 integer read-write
OID to enable/disable/demo the system buzzer. Enumeration: 'snmpBuzzerEnabled': 1, 'snmpBuzzerDisabled': 0, 'snmpBuzzerDemo': 2.
                         snmpBuzzerDisableDelay 1.3.6.1.4.1.10529.300.2.7 unsigned32 read-write
An OID to set the auto disable the buzzer in how many seconds after CPE operational.(0~1800)
                         gemtekDevCpeSnmpReadCommunity 1.3.6.1.4.1.10529.300.2.8 octet string read-write
An OID to set/get the SNMP Read community.
                         gemtekDevCpeSnmpSetCommunity 1.3.6.1.4.1.10529.300.2.9 octet string read-write
An OID to set/get the SNMP Set community.
                         gemtekDevCpeRestFactoryDefault 1.3.6.1.4.1.10529.300.2.10 integer read-write
Reset to factory default setting. Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeAutoFirmwareRollback 1.3.6.1.4.1.10529.300.2.11 integer read-write
Auto firmware rollback Disable/Level 1/Level 2.(default:Disable) Enumeration: 'disabled': 0, 'levelOne': 1, 'levelTwo': 2.
                         gemtekDevCpeFirmwareValidationTime 1.3.6.1.4.1.10529.300.2.12 unsigned32 read-write
Auto firmware rollback Level 1: The duration of firmware validation test time(0~99999 seconds).
                         gemtekDevCpeFirmwareValidationCount 1.3.6.1.4.1.10529.300.2.13 unsigned32 read-write
Auto firmware rollback Level 2: Failure count in firmware validation test(0~999).
                         gemtekDevCpeSnmpAccessFromLan 1.3.6.1.4.1.10529.300.2.14 integer read-write
Allow SNMP access from LAN enabled/disabled.(Default:disabled) Setting will take effect immediately. Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeDynamicMaxTxPowerBpsk 1.3.6.1.4.1.10529.300.2.15 octet string read-only
BPSK Dynamic Max Tx Power(dBm)
                         gemtekDevCpeDynamicMaxTxPowerQpsk 1.3.6.1.4.1.10529.300.2.16 octet string read-only
QPSK Dynamic Max Tx Power(dBm)
                         gemtekDevCpeDynamicMaxTxPowerQam16 1.3.6.1.4.1.10529.300.2.17 octet string read-only
QAM16 Dynamic Max Tx Power(dBm)
                         gemtekDevCpeDynamicMaxTxPowerQam64 1.3.6.1.4.1.10529.300.2.18 octet string read-only
QAM64 Dynamic Max Tx Power(dBm)
                         gemtekDevCpeSnmpAccessDomain 1.3.6.1.4.1.10529.300.2.19
                               gemtekDevCpeSnmpAccessDomainEnable 1.3.6.1.4.1.10529.300.2.19.1 integer read-write
Enable/Disable SNMP access domain(Default:Disable) Setting will take effect until save and reboot. Enumeration: 'disabled': 0, 'enabled': 1.
                               gemtekDevCpeSnmpAccessDomainIp 1.3.6.1.4.1.10529.300.2.19.2 ipaddress read-write
SNMP access domain IP
                               gemtekDevCpeSnmpAccessDomainNetmask 1.3.6.1.4.1.10529.300.2.19.3 ipaddress read-write
SNMP access domain netmask EX: gemtekDevCpeSnmpAccessDomainIp = 192.168.1.1 gemtekDevCpeSnmpAccessDomainNetmask = 255.255.255.0 SNMP access domain = 192.168.1.0
                     gemtekDevCpeTrap 1.3.6.1.4.1.10529.300.3
                         gemtekDevCpeTrapServer 1.3.6.1.4.1.10529.300.3.1
                             trapServerEnable 1.3.6.1.4.1.10529.300.3.1.1 integer read-write
Enables/disables trap. Default: Disable Enumeration: 'disabled': 0, 'enabled': 1.
                             trapServerIp 1.3.6.1.4.1.10529.300.3.1.2 ipaddress read-write
trap server
                             trapServerPort 1.3.6.1.4.1.10529.300.3.1.3 integer32 read-write
trap port
                             trapServerCommunity 1.3.6.1.4.1.10529.300.3.1.4 octet string read-write
trap community
                         gemtekDevCpeTrapPrefix 1.3.6.1.4.1.10529.300.3.2
                             coldStart 1.3.6.1.4.1.10529.300.3.2.1
A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
                             warmStart 1.3.6.1.4.1.10529.300.3.2.2
A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.
                             fatalErrorRestart 1.3.6.1.4.1.10529.300.3.2.3
A fatalErrorRestart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that fatal error may have occured.
                             linkUp 1.3.6.1.4.1.10529.300.3.2.4
A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.
                             notTheHightestPriorityAP 1.3.6.1.4.1.10529.300.3.2.5
When the AP preferred selection mode is enabled and the PMP320CPE synchronizes to an AP that is not the highest priority AP in the BSID list, the CPE shall send an SNMP trap after initial service flows and PMP320CPE management IP connectivity are established.
                     gemtekDevCpeDate 1.3.6.1.4.1.10529.300.4
                         gemtekDevCpeSystemDate 1.3.6.1.4.1.10529.300.4.1 octet string read-only
CPE system Date
                         gemtekDevCpeNtpServerEnable 1.3.6.1.4.1.10529.300.4.2 integer read-write
NTP Server Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeNtpServer 1.3.6.1.4.1.10529.300.4.3 octet string read-write
NTP Server configuration
                         gemtekDevCpeNtpServerFromDHCP 1.3.6.1.4.1.10529.300.4.4 integer read-write
NTP Server From DHCP Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeTimeZone 1.3.6.1.4.1.10529.300.4.5 integer32 read-write
CPE Time Zone configuration: 0 (GMT-12:00) International Date Line West , 1 (GMT-11:00) Midway Island, Samoa , 2 (GMT-10:00) Hawaii , 3 (GMT-09:00) Alaska , 4 (GMT-08:00) Pacific Time (US and Canada) , 5 (GMT-08:00) Tijuana, Baja California , 6 (GMT-07:00) Arizona , 7 (GMT-07:00) Chihuahua, La Paz, Mazatlan - New , 8 (GMT-07:00) Chihuahua, La Paz, Mazatlan - Old , 9 (GMT-07:00) Mountain Time (US and Canada) , 10 (GMT-06:00) Central America , 11 (GMT-06:00) Central Time (US and Canada) , 12 (GMT-06:00) Guadalajara, Mexico City, Monterrey - New , 13 (GMT-06:00) Guadalajara, Mexico City, Monterrey - Old , 14 (GMT-06:00) Saskatchewan , 15 (GMT-05:00) Bogota, Lima, Quito, Rio Branco , 16 (GMT-05:00) Eastern Time (US and Canada) , 17 (GMT-05:00) Indiana (East) , 18 (GMT-04:30) Caracas , 19 (GMT-04:00) Atlantic Time (Canada) , 20 (GMT-04:00) Caracas, La Paz , 21 (GMT-04:00) Manaus , 22 (GMT-04:00) Santiago , 23 (GMT-03:30) Newfoundland , 24 (GMT-03:00) Brasilia , 25 (GMT-03:00) Buenos Aires, Georgetown , 26 (GMT-03:00) Greenland , 27 (GMT-03:00) Montevideo , 28 (GMT-02:00) Mid-Atlantic , 29 (GMT-01:00) Azores , 30 (GMT-01:00) Cape Verde Is. , 31 (GMT) Casablanca, Monrovia, Reykjavik , 32 (GMT) Greenwich Mean Time - Dublin, Edinburgh, Lisbon, London , 33 (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna , 34 (GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague , 35 (GMT+01:00) Brussels, Copenhagen, Madrid, Paris , 36 (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb , 37 (GMT+01:00) West Central Africa , 38 (GMT+02:00) Amman , 39 (GMT+02:00) Athens, Bucharest, Istanbul , 40 (GMT+02:00) Beirut , 41 (GMT+02:00) Cairo , 42 (GMT+02:00) Harare, Pretoria , 43 (GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius , 44 (GMT+02:00) Jerusalem , 45 (GMT+02:00) Minsk , 46 (GMT+02:00) Windhoek , 47 (GMT+03:00) Baghdad , 48 (GMT+03:00) Kuwait, Riyadh , 49 (GMT+03:00) Moscow, St. Petersburg, Volgograd , 50 (GMT+03:00) Nairobi , 51 (GMT+03:00) Tbilisi , 52 (GMT+03:30) Tehran , 53 (GMT+04:00) Abu Dhabi, Muscat , 54 (GMT+04:00) Baku , 55 (GMT+04:00) Caucasus Standard Time , 56 (GMT+04:00) Yerevan , 57 (GMT+04:30) Kabul , 58 (GMT+05:00) Yekaterinburg , 59 (GMT+05:00) Islamabad, Karachi, Tashkent , 60 (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi , 61 (GMT+05:30) Sri Jayawardenapura-Kotte , 62 (GMT+05:45) Kathmandu , 63 (GMT+06:00) Almaty, Novosibirsk , 64 (GMT+06:00) Astana, Dhaka , 65 (GMT+06:30) Yangon (Rangoon) , 66 (GMT+07:00) Bangkok, Hanoi, Jakarta , 67 (GMT+07:00) Krasnoyarsk , 68 (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi , 69 (GMT+08:00) Irkutsk, Ulaan Bataar , 70 (GMT+08:00) Kuala Lumpur, Singapore , 71 (GMT+08:00) Perth , 72 (GMT+08:00) Taipei , 73 (GMT+09:00) Osaka, Sapporo, Tokyo , 74 (GMT+09:00) Seoul , 75 (GMT+09:00) Yakutsk , 76 (GMT+09:30) Adelaide , 77 (GMT+09:30) Darwin , 78 (GMT+10:00) Brisbane , 79 (GMT+10:00) Canberra, Melbourne, Sydney , 80 (GMT+10:00) Guam, Port Moresby , 81 (GMT+10:00) Hobart , 82 (GMT+10:00) Vladivostok , 83 (GMT+11:00) Magadan, Solomon Is., New Caledonia , 84 (GMT+12:00) Auckland, Wellington , 85 (GMT+12:00) Fiji, Kamchatka, Marshall Is. , 86 (GMT+13:00) Nuku`alofa
                         gemtekDevCpeDaylightSaving 1.3.6.1.4.1.10529.300.4.6 integer read-write
Daylight Saving Enable configuration Enumeration: 'disabled': 0, 'enabled': 1.
                     gemtekDevCpeAccountManagement 1.3.6.1.4.1.10529.300.5
                         administratorUsername 1.3.6.1.4.1.10529.300.5.1 octet string read-write
set/get WEB administrator username
                         administratorPassword 1.3.6.1.4.1.10529.300.5.2 octet string read-write
set-only WEB administrator password
                         administratorEnable 1.3.6.1.4.1.10529.300.5.3 integer read-write
set/get WEB administrator eabled/disabled Enumeration: 'disabled': 0, 'enabled': 1.
                         operatorUsername 1.3.6.1.4.1.10529.300.5.4 octet string read-write
set/get WEB operator username
                         operatorPassword 1.3.6.1.4.1.10529.300.5.5 octet string read-write
set-only WEB operator password
                         operatorEnable 1.3.6.1.4.1.10529.300.5.6 integer read-write
set/get WEB operator eabled/disabled Enumeration: 'disabled': 0, 'enabled': 1.
                         adminUsername 1.3.6.1.4.1.10529.300.5.7 octet string read-write
set/get WEB admin username
                         adminPassword 1.3.6.1.4.1.10529.300.5.8 octet string read-write
set-only WEB admin password
                         adminEnable 1.3.6.1.4.1.10529.300.5.9 integer read-write
set/get WEB admin eabled/disabled Enumeration: 'disabled': 0, 'enabled': 1.
                     gemtekDevCpeScanner 1.3.6.1.4.1.10529.300.6
                         gemtekDevCpeChannelBandwidthRang 1.3.6.1.4.1.10529.300.6.1 integer read-write
No function for this OID since f03b00-5.8.8Moto Select the Channel Bandwidth Rang. 0: threeToFive 3MHz ~ 5MHz => 3MHz, 3.5MHz, 5MHz 1: sixToTen 6MHz ~ 10MHz => 6MHz, 7MHz, 8.75MHz, 10MHz Enumeration: 'threeToFive': 0, 'sixToTen': 1.
                         gemtekDevCpeChannelApplyLoadOrSave 1.3.6.1.4.1.10529.300.6.2 integer read-write
Channel Scanner Setting load or save (defualut:0). Saved channel Table will take effect until reboot. Enumeration: 'load': 0, 'save': 1.
                         gemtekDevCpeChannelTable 1.3.6.1.4.1.10529.300.6.3 no-access
Channel Table
                             gemtekDevCpeChannelEntry 1.3.6.1.4.1.10529.300.6.3.1 no-access
Channel Entry
                                 gemtekDevCpeChannelIndex 1.3.6.1.4.1.10529.300.6.3.1.1 integer32 read-only
Channel Index
                                 gemtekDevCpeChannelActive 1.3.6.1.4.1.10529.300.6.3.1.2 integer read-only
Channel Active/Disactive Enumeration: 'active': 1, 'disactive': 0.
                                 gemtekDevCpeChannelFrequency 1.3.6.1.4.1.10529.300.6.3.1.3 unsigned32 read-only
Channel Frequency configuration (kHz)
                                 gemtekDevCpeChannelBandwidth 1.3.6.1.4.1.10529.300.6.3.1.4 integer32 read-only
Channel Bandwidth configuration(kHz) 3.5MHz = 3500kHz 5MHz = 5000kHz 7MHz = 7000kHz 10MHz = 10000kHz
                                 gemtekDevCpeChannelRssi 1.3.6.1.4.1.10529.300.6.3.1.5 octet string read-only
Channel RSSI (dBm)
                                 gemtekDevCpeChannelCinr 1.3.6.1.4.1.10529.300.6.3.1.6 octet string read-only
Channel CINR(dB)
                                 gemtekDevCpeChannelEntryEnable 1.3.6.1.4.1.10529.300.6.3.1.7 integer read-only
Channel Entry Enable(Disable/Enable) Enumeration: 'disabled': 0, 'enabled': 1.
                                 gemtekDevCpeChannelRowstatus 1.3.6.1.4.1.10529.300.6.3.1.8 rowstatus read-only
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row.
                                 gemtekDevCpeChannelBsId 1.3.6.1.4.1.10529.300.6.3.1.9 octet string read-only
Channel Bs Id
                                 gemtekDevCpeChannelPreambelIndex 1.3.6.1.4.1.10529.300.6.3.1.10 octet string read-only
Channel Preamble Index
                         gemtekDevCpeFrequencyRangeSetting 1.3.6.1.4.1.10529.300.6.4
                             gemtekDevCpeLockFrequencyRangeMin 1.3.6.1.4.1.10529.300.6.4.1 unsigned32 read-only
CPE lock frequency range Min(kHz)
                             gemtekDevCpeLockFrequencyRangeMax 1.3.6.1.4.1.10529.300.6.4.2 unsigned32 read-only
CPE lock frequency range Max(kHz)
                             gemtekDevCpeLockFrequencyRange 1.3.6.1.4.1.10529.300.6.4.3 integer read-only
Lock/Unlock frequency range state. Enumeration: 'lock': 1, 'unlock': 0.
                             gemtekDevCpeModelFrequencyRangeMin 1.3.6.1.4.1.10529.300.6.4.4 unsigned32 read-only
CPE model frequency range Min(kHz)
                             gemtekDevCpeModelFrequencyRangeMax 1.3.6.1.4.1.10529.300.6.4.5 unsigned32 read-only
CPE Model frequency range Max(kHz)
                         gemtekDevCpeAPPreferredList 1.3.6.1.4.1.10529.300.6.5
                             gemtekDevCpeAPPreferredSelectionEnable 1.3.6.1.4.1.10529.300.6.5.1 integer read-write
AP Preferred Selection eabled/disabled Enumeration: 'disabled': 0, 'enabled': 1.
                             gemtekDevCpeAPPreferredBsIdListLocked 1.3.6.1.4.1.10529.300.6.5.2 integer read-write
Configured BsId List Locked eabled/disabled Enumeration: 'disabled': 0, 'enabled': 1.
                             gemtekDevCpeAPPreferredPriorityOneBsId 1.3.6.1.4.1.10529.300.6.5.3 octet string read-write
Priority 1 BsId Address
                             gemtekDevCpeAPPreferredPriorityTwoBsId 1.3.6.1.4.1.10529.300.6.5.4 octet string read-write
Priority 2 BsId Address
                             gemtekDevCpeAPPreferredPriorityThreeBsId 1.3.6.1.4.1.10529.300.6.5.5 octet string read-write
Priority 3 BsId Address
                             gemtekDevCpeAPPreferredPriorityFourBsId 1.3.6.1.4.1.10529.300.6.5.6 octet string read-write
Priority 4 BsId Address
                     gemtekDevCpeAuthentication 1.3.6.1.4.1.10529.300.7
                         gemtekDevCpeAuthenticationSelectionPhase1 1.3.6.1.4.1.10529.300.7.1 integer read-write
Authentication Selection Phase1(None/EAP-TLS/EAP-TTLS) EAP-TLS needs at least one Device certificate file. Please upload a device certificate file to CPE then you can set EAP-TLS. Enumeration: 'none': 0, 'eapTls': 2, 'eapTtls': 1.
                         eapIdentityType 1.3.6.1.4.1.10529.300.7.2 integer read-write
EAP-TLS/EAP-TTLS Identity type 0: no Identity(Use realm) 1: manaul Identity 2: random Identity Enumeration: 'noIdentity': 0, 'manaulIdentity': 1, 'randomIdentity': 2.
                         eapIdentityUseRealm 1.3.6.1.4.1.10529.300.7.3 integer read-write
EAP-TLS/EAP-TTLS Identity use realm Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                         eapIdentityString 1.3.6.1.4.1.10529.300.7.4 octet string read-write
EAP-TLS/EAP-TTLS Identity String configuration
                         eapRealmString 1.3.6.1.4.1.10529.300.7.5 octet string read-write
EAP-TLS/EAP-TTLS Identity String configuration
                         eapValidateTheDateDurationOfCaCertificate 1.3.6.1.4.1.10529.300.7.6 integer read-write
EAP-TLS/EAP-TTLS Validate the date duration of CA certificate(Disable/Enable) Enumeration: 'disabled': 0, 'enabled': 1.
                         eapValidateTheServerCertificate 1.3.6.1.4.1.10529.300.7.7 integer read-write
EAP-TLS/EAP-TTLS Validate the server certificate(Disable/Enable) It needs at least one CA certificate file. Please upload a CA certificate file to CPE then you can set it enabled. Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeAuthenticationEAPTLS 1.3.6.1.4.1.10529.300.7.8
                             eapTlsPrivateKeyPassword 1.3.6.1.4.1.10529.300.7.8.1 octet string read-write
EAP-TLS Private key password
                         gemtekDevCpeAuthenticationEAPTTLS 1.3.6.1.4.1.10529.300.7.9
                             eapTtlsPhase2 1.3.6.1.4.1.10529.300.7.9.1 integer read-write
EAP-TTLS Phase2(PAP/CHAP/MSCHAP/MSCHAPV2/MD5) Enumeration: 'pap': 1, 'chap': 2, 'mschap': 3, 'mschapV2': 4, 'md5': 5.
                             eapTtlsUsername 1.3.6.1.4.1.10529.300.7.9.2 octet string read-write
EAP-TTLS Username
                             eapTtlsPassword 1.3.6.1.4.1.10529.300.7.9.3 octet string read-write
EAP-TTLS Password
                             eapTtlsUseDeviceCertificate 1.3.6.1.4.1.10529.300.7.9.4 integer read-write
EAP-TTLS Use device certificate(Disable/Enable) It needs at least one user certificate file. Please upload a user certificate file to CPE then you can set it enabled. Enumeration: 'disabled': 0, 'enabled': 1.
                             eapTtlsPrivateKeyPassword 1.3.6.1.4.1.10529.300.7.9.5 octet string read-write
EAP-TTLS Private key password(the same as EAP-TLS).
                         gemtekDevCpeCertificationFileManagement 1.3.6.1.4.1.10529.300.7.10
                               gemtekDevCpeCertificateUpload 1.3.6.1.4.1.10529.300.7.10.1
                                   gemtekDevCpeCACertificateFileName 1.3.6.1.4.1.10529.300.7.10.1.1 octet string read-write
specify the CA certificate file name on the FTP server.
                                   gemtekDevCpeCACertificateFileUpload 1.3.6.1.4.1.10529.300.7.10.1.2 integer read-write
check and upload the CA certificate file. Enumeration: 'default': 0, 'upload': 1.
                                   gemtekDevCpeUserCertificateFileName 1.3.6.1.4.1.10529.300.7.10.1.3 octet string read-write
specify the user certificate file name on the FTP server.
                                   gemtekDevCpeUserCertificateFileUpload 1.3.6.1.4.1.10529.300.7.10.1.4 integer read-write
check and upload the user certificate file. Enumeration: 'default': 0, 'upload': 1.
                               gemtekDevCpeCACertificateFileDelete 1.3.6.1.4.1.10529.300.7.10.2 integer read-write
delete the CA certificate file. Validate the server certificate needs at least one CA certificate file. If you delete all CA certificate files, it will change eapValidateTheServerCertificate to disabled. Enumeration: 'fileTwo': 2, 'fileOne': 1.
                               gemtekDevCpeUserCertificateFileDelete 1.3.6.1.4.1.10529.300.7.10.3 integer read-write
delete the user certificate file. EAP-TLS needs at least one device certificate file. If you delete all user certificate files, it will change gemtekDevCpeAuthenticationSelectionPhase1 to EAP-TTLS, and use device certificate disabled. Enumeration: 'fileTwo': 2, 'fileOne': 1.
                               gemtekDevCpeCACertificateFileTable 1.3.6.1.4.1.10529.300.7.10.4 no-access
CA certificate file table
                                   gemtekDevCpeCACertificateFileEntry 1.3.6.1.4.1.10529.300.7.10.4.1 no-access
CA certificate file entry
                                       gemtekDevCpeCACertificateIndex 1.3.6.1.4.1.10529.300.7.10.4.1.1 integer32 read-only
CA certificate file Table Index
                                       gemtekDevCpeCACertificateSize 1.3.6.1.4.1.10529.300.7.10.4.1.2 unsigned32 read-only
CA certificate file size(Byte)
                                       gemtekDevCpeCACertificateIssuer 1.3.6.1.4.1.10529.300.7.10.4.1.3 octet string read-only
CA certificate file issuer
                                       gemtekDevCpeCAValidityDateBegin 1.3.6.1.4.1.10529.300.7.10.4.1.4 octet string read-only
CA certificate file validity date begin
                                       gemtekDevCpeCAValidityDateEnd 1.3.6.1.4.1.10529.300.7.10.4.1.5 octet string read-only
CA certificate file validity date end
                                       gemtekDevCpeCACertificateSubject 1.3.6.1.4.1.10529.300.7.10.4.1.6 octet string read-only
CA certificate file subject
                               gemtekDevCpeUserCertificateFileTable 1.3.6.1.4.1.10529.300.7.10.5 no-access
User certificate file table
                                   gemtekDevCpeUserCertificateFileEntry 1.3.6.1.4.1.10529.300.7.10.5.1 no-access
User certificate file entry
                                       gemtekDevCpeUserCertificateIndex 1.3.6.1.4.1.10529.300.7.10.5.1.1 integer32 read-only
User certificate file Table Index
                                       gemtekDevCpeUserCertificateSize 1.3.6.1.4.1.10529.300.7.10.5.1.2 unsigned32 read-only
User certificate file size(Byte)
                                       gemtekDevCpeUserCertificateIssuer 1.3.6.1.4.1.10529.300.7.10.5.1.3 octet string read-only
User certificate file issuer
                                       gemtekDevCpeUserValidityDateBegin 1.3.6.1.4.1.10529.300.7.10.5.1.4 octet string read-only
User certificate file validity date begin
                                       gemtekDevCpeUserValidityDateEnd 1.3.6.1.4.1.10529.300.7.10.5.1.5 octet string read-only
User certificate file validity date end
                                       gemtekDevCpeUserCertificateSubject 1.3.6.1.4.1.10529.300.7.10.5.1.6 octet string read-only
User certificate file subject
                     gemtekDevCpeNetworkMode 1.3.6.1.4.1.10529.300.8
                         gemtekDevCpeNetoworkOperatingMode 1.3.6.1.4.1.10529.300.8.1 integer read-write
Netowork Operating Mode(Bridge/NAT) Enumeration: 'bridge': 1, 'nat': 0.
                         gemtekDevCpeBridgeMode 1.3.6.1.4.1.10529.300.8.2
                             gemtekDevCpeBridgeIpType 1.3.6.1.4.1.10529.300.8.2.1 integer read-write
Bridge IP Type(Static/DHCP) Enumeration: 'dhcp': 1, 'static': 0.
                             gemtekDevCpeBridgeIpAddress 1.3.6.1.4.1.10529.300.8.2.2 ipaddress read-write
Bridge Mode Static IP Address configuration
                             gemtekDevCpeBridgeNetmask 1.3.6.1.4.1.10529.300.8.2.3 ipaddress read-write
Bridge Mode Static Netmask configuration
                             gemtekDevCpeBridgeGateway 1.3.6.1.4.1.10529.300.8.2.4 ipaddress read-write
Bridge Mode Static IP Gateway
                             gemtekDevCpeBridgeDhcpLeaseTime 1.3.6.1.4.1.10529.300.8.2.5 unsigned32 read-only
Bridge Mode DHCP IP Lease time(sec).
                             gemtekDevCpeBridgeDhcpRenewalTime 1.3.6.1.4.1.10529.300.8.2.6 unsigned32 read-only
Bridge Mode DHCP IP Renewal time(sec).
                             gemtekDevCpeBridgeDhcpRebindTime 1.3.6.1.4.1.10529.300.8.2.7 unsigned32 read-only
Bridge Mode DHCP IP Rebind time(sec).
                             gemtekDevCpeMVLAN 1.3.6.1.4.1.10529.300.8.2.8
                                 gemtekDevCpeMgmtVlan 1.3.6.1.4.1.10529.300.8.2.8.1
                                     gemtekDevCpeMgmtVlanEnalbe 1.3.6.1.4.1.10529.300.8.2.8.1.1 integer read-write
Management VLAN (Enabled/Disabled) Enumeration: 'disabled': 0, 'enabled': 1.
                                     gemtekDevCpeMgmtVlanVid 1.3.6.1.4.1.10529.300.8.2.8.1.2 unsigned32 read-write
Setting Management VLAN VID(0~4095).
                                     gemtekDevCpeMgmtVlanVp 1.3.6.1.4.1.10529.300.8.2.8.1.3 unsigned32 read-only
Management VLAN VP.
                                 gemtekDevCpeDataVlan 1.3.6.1.4.1.10529.300.8.2.8.2
                                     gemtekDevCpeDataVlanEnalbe 1.3.6.1.4.1.10529.300.8.2.8.2.1 integer read-write
Data VLAN (Enabled/Disabled) Enumeration: 'disabled': 0, 'enabled': 1.
                                     gemtekDevCpeDataVlanVid 1.3.6.1.4.1.10529.300.8.2.8.2.2 unsigned32 read-write
Setting Data VLAN VID(0~4095).
                                     gemtekDevCpeAllowPacketType 1.3.6.1.4.1.10529.300.8.2.8.2.3 integer read-write
Data VLN allow packet type Enumeration: 'taggedOnly': 1, 'all': 0, 'untaggedOnly': 2.
                                 gemtekDevCpeVlanMembershipTable 1.3.6.1.4.1.10529.300.8.2.8.3 no-access
VLAN Membership Table
                                     gemtekDevCpeVlanMembershipEntry 1.3.6.1.4.1.10529.300.8.2.8.3.1 no-access
VLAN Membership Entry
                                         gemtekDevCpeVlanMembershipIndex 1.3.6.1.4.1.10529.300.8.2.8.3.1.1 integer32 read-only
VLAN Membership Index
                                         gemtekDevCpeVlanMembershipVidBegin 1.3.6.1.4.1.10529.300.8.2.8.3.1.2 unsigned32 read-only
VLAN Membership VLAN VID Begin(0~4095).
                                         gemtekDevCpeVlanMembershipVidEnd 1.3.6.1.4.1.10529.300.8.2.8.3.1.3 unsigned32 read-only
VLAN Membership VLAN VID End(0~4095).
                                         gemtekDevCpeVlanMembershipVidRowstatus 1.3.6.1.4.1.10529.300.8.2.8.3.1.4 rowstatus read-only
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row. Every row can't overlap(Begin,End).
                                 gemtekDevCpeDscpToVp 1.3.6.1.4.1.10529.300.8.2.8.4
                                     gemtekDevCpeDscpToVpMapping 1.3.6.1.4.1.10529.300.8.2.8.4.1 octet string read-write
DSCP To VP Mapping, CP00~CP63,CP00=0,CP48=6,CP56=7.
                                 gemtekDevCpePktCounter 1.3.6.1.4.1.10529.300.8.2.8.5
                                     gemtekDevCpeTaggedPkts 1.3.6.1.4.1.10529.300.8.2.8.5.1 unsigned32 read-only
CPE tagged packets.
                                     gemtekDevCpeTaggedPktsReset 1.3.6.1.4.1.10529.300.8.2.8.5.2 integer read-write
Reset CPE tagged packets. Enumeration: 'default': 0, 'reset': 1.
                                     gemtekDevCpeUntaggedPkts 1.3.6.1.4.1.10529.300.8.2.8.5.3 unsigned32 read-only
CPE tagged packets.
                                     gemtekDevCpeUntaggedPktsReset 1.3.6.1.4.1.10529.300.8.2.8.5.4 integer read-write
Reset CPE untagged packets. Enumeration: 'default': 0, 'reset': 1.
                                     gemtekDevCpeNonmemberPkts 1.3.6.1.4.1.10529.300.8.2.8.5.5 unsigned32 read-only
CPE Non-member packets.
                                     gemtekDevCpeNonmemberPktsReset 1.3.6.1.4.1.10529.300.8.2.8.5.6 integer read-write
Reset CPE Non-member packets. Enumeration: 'default': 0, 'reset': 1.
                         gemtekDevCpeNatMode 1.3.6.1.4.1.10529.300.8.3
                             gemtekDevCpeNatWanIpType 1.3.6.1.4.1.10529.300.8.3.1 integer read-write
NAT WAN IP Type(Static/DHCP) Enumeration: 'dhcp': 1, 'static': 0.
                             gemtekDevCpeNatWanIpAddress 1.3.6.1.4.1.10529.300.8.3.2 ipaddress read-write
NAT Static WAN IP Address configuration
                             gemtekDevCpeNatWanNetmask 1.3.6.1.4.1.10529.300.8.3.3 ipaddress read-write
NAT Static WAN Netmask configuration
                             gemtekDevCpeNatWanGateway 1.3.6.1.4.1.10529.300.8.3.4 ipaddress read-write
NAT Static WAN Gateway configuration
                             gemtekDevCpeNatLanIpType 1.3.6.1.4.1.10529.300.8.3.5 integer read-only
NAT LAN IP Type(Static/DHCP) Enumeration: 'dhcp': 1, 'static': 0.
                             gemtekDevCpeNatLanIpAddress 1.3.6.1.4.1.10529.300.8.3.6 ipaddress read-write
NAT LAN IP Address configuration
                             gemtekDevCpeNatLanNetmask 1.3.6.1.4.1.10529.300.8.3.7 ipaddress read-write
NAT LAN Netmask configuration
                             gemtekDevCpeNatMtu 1.3.6.1.4.1.10529.300.8.3.8 integer32 read-write
NAT Ethernet MTU size(Default:1476)
                             gemtekDevCpeDhcpServer 1.3.6.1.4.1.10529.300.8.3.9
                                 gemtekDevCpeDhcpServerEnable 1.3.6.1.4.1.10529.300.8.3.9.1 integer read-write
DHCP Server Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                                 gemtekDevCpeDhcpServerStartIp 1.3.6.1.4.1.10529.300.8.3.9.2 ipaddress read-write
DHCP Server Start IP
                                 gemtekDevCpeDhcpServerEndIp 1.3.6.1.4.1.10529.300.8.3.9.3 ipaddress read-write
DHCP Server End IP
                                 gemtekDevCpeDhcpServerPrimaryDnsIp 1.3.6.1.4.1.10529.300.8.3.9.4 ipaddress read-write
DHCP Server Primary DNS IP Address configuration
                                 gemtekDevCpeDhcpServerPrimaryDnsFromIsp 1.3.6.1.4.1.10529.300.8.3.9.5 integer read-write
DHCP Server Primary DNS From ISP Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                                 gemtekDevCpeDhcpServerSecondDnsIp 1.3.6.1.4.1.10529.300.8.3.9.6 ipaddress read-write
DHCP Server Second DNS IP Address configuration
                                 gemtekDevCpeDhcpServerSecondDnsFromIsp 1.3.6.1.4.1.10529.300.8.3.9.7 integer read-write
DHCP Server Second DNS From ISP Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                                 gemtekDevCpeDhcpServerTertiaryDnsIp 1.3.6.1.4.1.10529.300.8.3.9.8 ipaddress read-write
DHCP Server Tertiary DNS IP Address configuration
                                 gemtekDevCpeDhcpServerTertiaryDnsFromIsp 1.3.6.1.4.1.10529.300.8.3.9.9 integer read-write
DHCP Server Tertiary DNS From ISP Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                                 gemtekDevCpeDhcpServerDomainName 1.3.6.1.4.1.10529.300.8.3.9.10 octet string read-write
DHCP Server Domain Name
                                 gemtekDevCpeDhcpServerMaxLeaseTime 1.3.6.1.4.1.10529.300.8.3.9.11 integer32 read-write
DHCP Server MAX Lease Time
                                 gemtekDevCpeDhcpServerPermanentHostTable 1.3.6.1.4.1.10529.300.8.3.9.12 no-access
DHCP Server Permanent Host Table
                                       gemtekDevCpeDhcpServerPermanentHostEntry 1.3.6.1.4.1.10529.300.8.3.9.12.1 no-access
DHCP Server Permanent Host Entry
                                           gemtekDevCpeDhcpServerPermanentHostIndex 1.3.6.1.4.1.10529.300.8.3.9.12.1.1 integer32 read-only
DHCP Server Permanent Host Index
                                           gemtekDevCpeDhcpServerPermanentHostMac 1.3.6.1.4.1.10529.300.8.3.9.12.1.2 octet string read-only
DHCP Server Permanent Host MAC
                                           gemtekDevCpeDhcpServerPermanentHostIp 1.3.6.1.4.1.10529.300.8.3.9.12.1.3 ipaddress read-only
DHCP Server Permanent Host IP
                                           gemtekDevCpeDhcpServerPermanentHostEntryEnable 1.3.6.1.4.1.10529.300.8.3.9.12.1.4 integer read-only
DHCP Server Permanent Host Entry Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                                           gemtekDevCpeDhcpServerPermanentRowstatus 1.3.6.1.4.1.10529.300.8.3.9.12.1.5 rowstatus read-only
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row.
                             gemtekDevCpePortForwarding 1.3.6.1.4.1.10529.300.8.3.10
                                   gemtekDevCpePortForwardingTable 1.3.6.1.4.1.10529.300.8.3.10.1 no-access
Port Forwarding Table
                                       gemtekDevCpePortForwardingEntry 1.3.6.1.4.1.10529.300.8.3.10.1.1 no-access
Port Forwarding Entry WAN End - WAN Begin=LAN End - LAN Begin, WAN End - WAN Begin <=30, WAN Begin=>1 WAN End<=65535, LAN Begin=>1 LAN End<=65535
                                           gemtekDevCpePortForwardingIndex 1.3.6.1.4.1.10529.300.8.3.10.1.1.1 integer32 read-only
Port Forwarding Index
                                           gemtekDevCpePortForwardingWanPortBegin 1.3.6.1.4.1.10529.300.8.3.10.1.1.2 integer32 read-only
Port Forwarding Wan Port Begin
                                           gemtekDevCpePortForwardingWanPortEnd 1.3.6.1.4.1.10529.300.8.3.10.1.1.3 integer32 read-only
Port Forwarding Wan Port End
                                           gemtekDevCpePortForwardingLanIp 1.3.6.1.4.1.10529.300.8.3.10.1.1.4 ipaddress read-only
Port Forwarding Lan Ip
                                           gemtekDevCpePortForwardingLanPortBegin 1.3.6.1.4.1.10529.300.8.3.10.1.1.5 integer32 read-only
Port Forwarding Lan Port Begin
                                           gemtekDevCpePortForwardingLanPortEnd 1.3.6.1.4.1.10529.300.8.3.10.1.1.6 integer32 read-only
Port Forwarding Lan Port End
                                           gemtekDevCpePortForwardingProtocol 1.3.6.1.4.1.10529.300.8.3.10.1.1.7 integer read-only
Port Forwarding Entry Protocol Enumeration: 'tcpAndUdp': 2, 'udp': 1, 'tcp': 0.
                                           gemtekDevCpePortForwardingEntryEnable 1.3.6.1.4.1.10529.300.8.3.10.1.1.8 integer read-only
Port Forwarding Entry Enable Enumeration: 'disabled': 0, 'enabled': 1.
                                           gemtekDevCpePortForwardingRowstatus 1.3.6.1.4.1.10529.300.8.3.10.1.1.9 rowstatus read-only
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row.
                             gemtekDevCpePortTrigger 1.3.6.1.4.1.10529.300.8.3.11
                                   gemtekDevCpePortTriggerTable 1.3.6.1.4.1.10529.300.8.3.11.1 no-access
Port Trigger Table
                                       gemtekDevCpePortTriggerEntry 1.3.6.1.4.1.10529.300.8.3.11.1.1 no-access
Port Trigger Entry 1<=TriggerPortBegin
                                           gemtekDevCpePortTriggerIndex 1.3.6.1.4.1.10529.300.8.3.11.1.1.1 integer32 read-only
Port Trigger Index
                                           gemtekDevCpePortTriggerName 1.3.6.1.4.1.10529.300.8.3.11.1.1.2 octet string read-only
Port Trigger Name
                                           gemtekDevCpePortTriggerTriggerPortBegin 1.3.6.1.4.1.10529.300.8.3.11.1.1.3 integer32 read-only
Port Trigger Trigger Port Begin
                                           gemtekDevCpePortTriggerTriggerPortEnd 1.3.6.1.4.1.10529.300.8.3.11.1.1.4 integer32 read-only
Port Trigger Trigger Port End
                                           gemtekDevCpePortTriggerForwardingPortBegin 1.3.6.1.4.1.10529.300.8.3.11.1.1.5 integer32 read-only
Port Trigger Forwarding Port Begin
                                           gemtekDevCpePortTriggerForwardingPortEnd 1.3.6.1.4.1.10529.300.8.3.11.1.1.6 integer32 read-only
Port Trigger Forwarding Port End
                                           gemtekDevCpePortTriggerProtocol 1.3.6.1.4.1.10529.300.8.3.11.1.1.7 integer read-only
Port Trigger Protocol Enumeration: 'udp': 1, 'tcp': 0.
                                           gemtekDevCpePortTriggerEntryEnable 1.3.6.1.4.1.10529.300.8.3.11.1.1.8 integer read-only
Port Trigger Entry Enable Enumeration: 'disabled': 0, 'enabled': 1.
                                           gemtekDevCpePortTriggerRowstatus 1.3.6.1.4.1.10529.300.8.3.11.1.1.9 rowstatus read-only
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row.
                             gemtekDevCpeDhcpClientList 1.3.6.1.4.1.10529.300.8.3.12
                                   gemtekDevCpeDhcpClentListTable 1.3.6.1.4.1.10529.300.8.3.12.1 no-access
gemtekDevCpeDhcpClentListTable
                                       gemtekDevCpeDhcpClentListEntry 1.3.6.1.4.1.10529.300.8.3.12.1.1 no-access
gemtekDevCpeDhcpClentListEntry
                                           gemtekDevCpeDhcpClentListIndex 1.3.6.1.4.1.10529.300.8.3.12.1.1.1 integer32 read-only
DHCP Clent List Index
                                           gemtekDevCpeDhcpClentListIp 1.3.6.1.4.1.10529.300.8.3.12.1.1.2 ipaddress read-only
DHCP Clent List: IP Address
                                           gemtekDevCpeDhcpClentListMacAddress 1.3.6.1.4.1.10529.300.8.3.12.1.1.3 octet string read-only
DHCP Clent List: MAC Address
                                           gemtekDevCpeDhcpClentListExpireTime 1.3.6.1.4.1.10529.300.8.3.12.1.1.4 octet string read-only
DHCP Clent List: Expire Time
                             gemtekDevCpeDscpConfiguration 1.3.6.1.4.1.10529.300.8.3.13
                                   gemtekDevCpeMgmtDscpId 1.3.6.1.4.1.10529.300.8.3.13.1 integer32 read-write
MGMT DSCP ID(range:0~63, default:0)
                                   gemtekDevCpeDropDataPacket 1.3.6.1.4.1.10529.300.8.3.13.2 integer read-write
Drop data packet if its dscp is the same as mgmt Enabled/Disabled(default:Disabled) Enumeration: 'disabled': 0, 'enabled': 1.
                             gemtekDevCpeNatWanDhcpLeaseTime 1.3.6.1.4.1.10529.300.8.3.14 unsigned32 read-only
NAT Mode DHCP IP Lease time(sec).
                             gemtekDevCpeNatWanDhcpRenewalTime 1.3.6.1.4.1.10529.300.8.3.15 unsigned32 read-only
NAT Mode DHCP IP Renewal time(sec).
                             gemtekDevCpeNatWanDhcpRebindTime 1.3.6.1.4.1.10529.300.8.3.16 unsigned32 read-only
NAT Mode DHCP IP Rebind time(sec).
                             gemtekDevCpeNatModeVLAN 1.3.6.1.4.1.10529.300.8.3.17
                                   gemtekDevCpeNatModeMgmtVlan 1.3.6.1.4.1.10529.300.8.3.17.1
                                       gemtekDevCpeNatModeMgmtVlanEnalbe 1.3.6.1.4.1.10529.300.8.3.17.1.1 integer read-write
[Nat Mode] Management VLAN (Enabled/Disabled) Enumeration: 'disabled': 0, 'enabled': 1.
                                       gemtekDevCpeNatModeMgmtVlanVid 1.3.6.1.4.1.10529.300.8.3.17.1.2 unsigned32 read-write
[Nat Mode] Setting Management VLAN VID(1~4095).
                                       gemtekDevCpeNatModeMgmtVlanVp 1.3.6.1.4.1.10529.300.8.3.17.1.3 unsigned32 read-write
[Nat Mode] Setting Management VLAN VP(0~7).
                                   gemtekDevCpeNatModeDataVlan 1.3.6.1.4.1.10529.300.8.3.17.2
                                       gemtekDevCpeNatModeDataVlanEnalbe 1.3.6.1.4.1.10529.300.8.3.17.2.1 integer read-write
[Nat Mode] Data VLAN (Enabled/Disabled) Enumeration: 'disabled': 0, 'enabled': 1.
                                       gemtekDevCpeNatModeDataVlanVid 1.3.6.1.4.1.10529.300.8.3.17.2.2 unsigned32 read-write
[Nat Mode] Setting Data VLAN VID(1~4095).
                                       gemtekDevCpeNatModeDataVlanVp 1.3.6.1.4.1.10529.300.8.3.17.2.3 unsigned32 read-write
[Nat Mode] Setting Data VLAN VP(0~7).
                     gemtekDevCpeFirewall 1.3.6.1.4.1.10529.300.9
                         gemtekDevCpeAllowWebAccessingFromWan 1.3.6.1.4.1.10529.300.9.1 integer read-write
Allow Web Accessing From WAN(disable/enable) Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeAllowTelnetAccessingFromWan 1.3.6.1.4.1.10529.300.9.2 integer read-write
Allow Telnet Accessing From WAN(disable/enable) Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeDmzEnable 1.3.6.1.4.1.10529.300.9.3 integer read-write
DMZ Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeDmzIpAddress 1.3.6.1.4.1.10529.300.9.4 ipaddress read-write
DMZ IP Address
                         gemtekDevCpeRedirectIcmpToTheDmzHostEnable 1.3.6.1.4.1.10529.300.9.5 integer read-write
Redirect ICMP packets to the DMZ host Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeFirewallEnable 1.3.6.1.4.1.10529.300.9.6 integer read-write
Firewall Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeFirewallTable 1.3.6.1.4.1.10529.300.9.7 no-access
Firewall Table
                             gemtekDevCpeFirewallEntry 1.3.6.1.4.1.10529.300.9.7.1 no-access
Firewall Entry
                                 gemtekDevCpeFirewallIndex 1.3.6.1.4.1.10529.300.9.7.1.1 integer32 read-only
Firewall Index
                                 gemtekDevCpeFirewallName 1.3.6.1.4.1.10529.300.9.7.1.2 octet string read-only
Firewall Name
                                 gemtekDevCpeFirewallAction 1.3.6.1.4.1.10529.300.9.7.1.3 integer read-only
Firewall Action(Deny/Allow) Enumeration: 'deny': 0, 'allow': 1.
                                 gemtekDevCpeFirewallInterface 1.3.6.1.4.1.10529.300.9.7.1.4 integer read-only
Firewall Interface(Ethernet/Wimax) Enumeration: 'ethernet': 0, 'wimax': 1.
                                 gemtekDevCpeFirewallProtocol 1.3.6.1.4.1.10529.300.9.7.1.5 integer read-only
Firewall Protocol Enumeration: 'udp': 17, 'icmp': 1, 'any': 0, 'tcp': 6.
                                 gemtekDevCpeFirewallPriority 1.3.6.1.4.1.10529.300.9.7.1.6 integer read-only
Firewall Entry Priority Enumeration: 'seven': 7, 'nine': 9, 'six': 6, 'two': 2, 'three': 3, 'four': 4, 'hi': 1, 'five': 5, 'lo': 10, 'eight': 8.
                                 gemtekDevCpeFirewallEntryEnable 1.3.6.1.4.1.10529.300.9.7.1.7 integer read-only
Firewall Entry Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                                 gemtekDevCpeFirewallSrcMac 1.3.6.1.4.1.10529.300.9.7.1.8 octet string read-only
Firewall Source MAC Address
                                 gemtekDevCpeFirewallDstMac 1.3.6.1.4.1.10529.300.9.7.1.9 octet string read-only
Firewall Destination MAC Address
                                 gemtekDevCpeFirewallSrcIpAddress 1.3.6.1.4.1.10529.300.9.7.1.10 ipaddress read-only
Firewall Source IP Address
                                 gemtekDevCpeFirewallDstIpAddress 1.3.6.1.4.1.10529.300.9.7.1.11 ipaddress read-only
Firewall Destination IP Address
                                 gemtekDevCpeFirewallSrcPortRangeBegin 1.3.6.1.4.1.10529.300.9.7.1.12 integer32 read-only
Firewall Source Port Range Begin(1~65535)
                                 gemtekDevCpeFirewallSrcPortRangeEnd 1.3.6.1.4.1.10529.300.9.7.1.13 integer32 read-only
Firewall Source Port Range End(1~65535)
                                 gemtekDevCpeFirewallDstPortRangeBegin 1.3.6.1.4.1.10529.300.9.7.1.14 integer32 read-only
Firewall Destination Port Range Begin(1~65535)
                                 gemtekDevCpeFirewallDstPortRangeEnd 1.3.6.1.4.1.10529.300.9.7.1.15 integer32 read-only
Firewall Destination Port Range End(1~65535)
                                 gemtekDevCpeFirewallRowstatus 1.3.6.1.4.1.10529.300.9.7.1.16 rowstatus read-only
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row.
                         gemtekDevCpeTelnetEnable 1.3.6.1.4.1.10529.300.9.8 integer read-write
Telnet Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeFirewallEtherTypeFilterOneEnable 1.3.6.1.4.1.10529.300.9.9 integer read-write
Firewall Ether-Type Filter Group One Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeFirewallEtherTypeFilterOneTypeDeny 1.3.6.1.4.1.10529.300.9.10 octet string read-write
Firewall Ether-Type Filter Group One Type Deny
                         gemtekDevCpeFirewallEtherTypeFilterTwoEnable 1.3.6.1.4.1.10529.300.9.11 integer read-write
Firewall Ether-Type Filter Group Two Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeFirewallEtherTypeFilterTwoTypeDeny 1.3.6.1.4.1.10529.300.9.12 octet string read-write
Firewall Ether-Type Filter Group Two Type Deny
                         gemtekDevCpeFirewallEtherTypeFilterThreeEnable 1.3.6.1.4.1.10529.300.9.13 integer read-write
Firewall Ether-Type Filter Group Three Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeFirewallEtherTypeFilterThreeTypeDeny 1.3.6.1.4.1.10529.300.9.14 octet string read-write
Firewall Ether-Type Filter Group Three Type Deny
                         gemtekDevCpeFirewallEtherTypeFilterFourEnable 1.3.6.1.4.1.10529.300.9.15 integer read-write
Firewall Ether-Type Filter Group Four Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeFirewallEtherTypeFilterFourTypeDeny 1.3.6.1.4.1.10529.300.9.16 octet string read-write
Firewall Ether-Type Filter Group Four Type Deny
                         gemtekDevCpeFirewallEtherTypeFilterFiveEnable 1.3.6.1.4.1.10529.300.9.17 integer read-write
Firewall Ether-Type Filter Group Five Enable/Disable Enumeration: 'disabled': 0, 'enabled': 1.
                         gemtekDevCpeFirewallEtherTypeFilterFiveTypeDeny 1.3.6.1.4.1.10529.300.9.18 octet string read-write
Firewall Ether-Type Filter Group Five Type Deny
                         gemtekDevCpeFirewallPPPoEEnable 1.3.6.1.4.1.10529.300.9.19 integer read-write
PPPoE Enable/Disable (Only allow PPPoE traffic pass through) Enumeration: 'disabled': 0, 'enabled': 1.
                     gemtekDevCpeServiceFlow 1.3.6.1.4.1.10529.300.11
                           gemtekDevCpeServiceFlowTable 1.3.6.1.4.1.10529.300.11.1 no-access
gemtekDevCpeServiceFlowTable
                               gemtekDevCpeServiceFlowEntry 1.3.6.1.4.1.10529.300.11.1.1 no-access
gemtekDevCpeServiceFlowEntry
                                   gemtekDevCpeServiceFlowIndex 1.3.6.1.4.1.10529.300.11.1.1.1 integer32 read-only
Service Flow Index
                                   gemtekDevCpeServiceFlowSFID 1.3.6.1.4.1.10529.300.11.1.1.2 unsigned32 read-only
Service Flow SFID
                                   gemtekDevCpeServiceFlowCID 1.3.6.1.4.1.10529.300.11.1.1.3 unsigned32 read-only
Service Flow CID
                                   gemtekDevCpeServiceFlowBCID 1.3.6.1.4.1.10529.300.11.1.1.4 unsigned32 read-only
Service Flow Basic CID
                                   gemtekDevCpeServiceFlowType 1.3.6.1.4.1.10529.300.11.1.1.5 integer read-only
Service Flow Type: 0:basic 1:primary 2:secondary 3:data 4multicast Enumeration: 'secondary': 2, 'data': 3, 'primary': 1, 'multicast': 4, 'basic': 0.
                                   gemtekDevCpeServiceFlowState 1.3.6.1.4.1.10529.300.11.1.1.6 integer read-only
Service Flow State: 0:provisioned 1:admitted 2:active Enumeration: 'active': 2, 'provisioned': 0, 'admitted': 1.
                                   gemtekDevCpeServiceFlowDirection 1.3.6.1.4.1.10529.300.11.1.1.7 integer read-only
Service Flow Direction 1:uplink 2:downlink 3:bidirectional Enumeration: 'bidirectional': 3, 'downlink': 2, 'uplink': 1.
                                   gemtekDevCpeServiceFlowEnable 1.3.6.1.4.1.10529.300.11.1.1.8 integer read-only
Service Flow Enable/Disable Enumeration: 'enable': 1, 'disable': 0.
                                   gemtekDevCpeServiceFlowScheduling 1.3.6.1.4.1.10529.300.11.1.1.9 integer read-only
Service Flow Scheduling type Enumeration: 'ugs': 6, 'nrtps': 3, 'rtps': 4, 'bestEffort': 2, 'ertps': 5.
                                   gemtekDevCpeServiceFlowMaxRate 1.3.6.1.4.1.10529.300.11.1.1.10 unsigned32 read-only
Service Flow Max Rate(bit/s)
                                   gemtekDevCpeServiceFlowARQ 1.3.6.1.4.1.10529.300.11.1.1.11 integer read-only
Service Flow ARQ Enable yes/no Enumeration: 'yes': 1, 'no': 0.
                                   gemtekDevCpeServiceFlowHARQ 1.3.6.1.4.1.10529.300.11.1.1.12 integer read-only
Service Flow HARQ Enable yes/no Enumeration: 'yes': 1, 'no': 0.
                                   gemtekDevCpeServiceFlowRules 1.3.6.1.4.1.10529.300.11.1.1.13 unsigned32 read-only
Service Flow calssifier rule numbers
                     gemtekDevCpeSyslog 1.3.6.1.4.1.10529.300.12
                           gemtekDevCpeSyslogEnable 1.3.6.1.4.1.10529.300.12.1 integer read-write
Send syslog to syslog server enable/disable Enumeration: 'disabled': 0, 'enabled': 1.
                           gemtekDevCpeSyslogServerIp 1.3.6.1.4.1.10529.300.12.2 ipaddress read-write
config syslog server IP
                           gemtekDevCpeSyslogServerPort 1.3.6.1.4.1.10529.300.12.3 integer32 read-only
config syslog server port(1~65535,default:514)
                     gemtekDevCpeMaxTxPower 1.3.6.1.4.1.10529.300.13
                           gemtekDevCpeMaxTxPowerModeSelection 1.3.6.1.4.1.10529.300.13.1 integer read-write
The variable is deprecated. Max Tx Power Mode Selection (RF Mode/EIRP Mode) Enumeration: 'rf': 0, 'eirp': 1.
                           gemtekDevCpeMaxTxPowerRfMode 1.3.6.1.4.1.10529.300.13.2
                               gemtekDevCpeRfModeBPSK 1.3.6.1.4.1.10529.300.13.2.1 unsigned32 read-write
The variable is deprecated. RF Mode BPSK Setting(0~2750)
                               gemtekDevCpeRfModeQPSK 1.3.6.1.4.1.10529.300.13.2.2 unsigned32 read-write
The variable is deprecated. RF Mode QPSK Setting(0~2750)
                               gemtekDevCpeRfModeQAM16 1.3.6.1.4.1.10529.300.13.2.3 unsigned32 read-write
The variable is deprecated. RF Mode QAM16 Setting(0~2750)
                               gemtekDevCpeRfModeQAM64 1.3.6.1.4.1.10529.300.13.2.4 unsigned32 read-write
The variable is deprecated. RF Mode QAM64 Setting(0~2450)
                           gemtekDevCpeMaxTxPowerEirpMode 1.3.6.1.4.1.10529.300.13.3
                               gemtekDevCpeEirpModeAntennaGain 1.3.6.1.4.1.10529.300.13.3.1 unsigned32 read-write
The variable is deprecated. EIRP Mode Antenna Gain(0~2450)
                               gemtekDevCpeEirpModeBPSK 1.3.6.1.4.1.10529.300.13.3.2 unsigned32 read-write
The variable is deprecated. EIRP Mode BPSK Setting(0~2750)
                               gemtekDevCpeEirpModeQPSK 1.3.6.1.4.1.10529.300.13.3.3 unsigned32 read-write
The variable is deprecated. EIRP Mode QPSK Setting(0~2750)
                               gemtekDevCpeEirpModeQAM16 1.3.6.1.4.1.10529.300.13.3.4 unsigned32 read-write
The variable is deprecated. EIRP Mode QAM16 Setting(0~2750)
                               gemtekDevCpeEirpModeQAM64 1.3.6.1.4.1.10529.300.13.3.5 unsigned32 read-write
The variable is deprecated. EIRP Mode QAM64 Setting(0~2450)
                     gemtekDevCpePullFtpUpgrade 1.3.6.1.4.1.10529.300.21
                           gemtekDevCpePullFtpServerIP 1.3.6.1.4.1.10529.300.21.1 ipaddress read-write
FTP upgrade server IP
                           gemtekDevCpePullFtpServerUserName 1.3.6.1.4.1.10529.300.21.2 octet string read-write
Ftp Server User Name
                           gemtekDevCpePullFtpServerPassword 1.3.6.1.4.1.10529.300.21.3 octet string read-write
Ftp Server Password
                           gemtekDevCpePullFtpFilePath 1.3.6.1.4.1.10529.300.21.4 octet string read-write
Ftp File Path
                           gemtekDevCpePullFtpFileName 1.3.6.1.4.1.10529.300.21.5 octet string read-write
Ftp File Name
                           gemtekDevCpePullFtpUpgradeCmd 1.3.6.1.4.1.10529.300.21.6 integer read-write
Control FTP upgrade Enumeration: 'default': 0, 'downloadAndUpgrade': 1, 'rollback': 2.
                           gemtekDevCpePullFtpUpgradeAdminStatus 1.3.6.1.4.1.10529.300.21.7 integer read-only
Device status information on the progress of the upgrade. Enumeration: 'ready': 0, 'downloading': 1, 'installing': 2, 'success': 4, 'error': 3.
                     gemtekDevCpePushFtpUpgrade 1.3.6.1.4.1.10529.300.22
                           gemtekDevCpeCurrentSwVersion 1.3.6.1.4.1.10529.300.22.1 octet string read-only
This value identifies the version of software currently running in the CPE
                           gemtekDevCpePreviousSwVersion 1.3.6.1.4.1.10529.300.22.2 octet string read-only
This value identifies the previous software version in the CPE
                           gemtekDevCpeDownloadSwVersion 1.3.6.1.4.1.10529.300.22.3 octet string read-write
This value identifies the version of software to download
                           gemtekDevCpePushFtpUpgradeCmd 1.3.6.1.4.1.10529.300.22.4 integer read-write
Control FTP upgrade process Enumeration: 'default': 0, 'download': 1, 'upgrade': 2, 'rollback': 3.
                           gemtekDevCpePushFtpUpgradeAdminStatus 1.3.6.1.4.1.10529.300.22.5 integer read-only
Device status information on the progress of the upgrade. Enumeration: 'ready': 0, 'installing': 1, 'success': 3, 'error': 2.
                     gemtekDevCpeTftpUpgrade 1.3.6.1.4.1.10529.300.69
                           gemtekDevCpeTftpServerIP 1.3.6.1.4.1.10529.300.69.1 ipaddress read-write
TFTP upgrade server IP
                           gemtekDevCpeTftpFileName 1.3.6.1.4.1.10529.300.69.2 octet string read-write
TFTP File Name
                           gemtekDevCpeTftpUpgradeCmd 1.3.6.1.4.1.10529.300.69.3 integer read-write
Control TFTP upgrade Enumeration: 'default': 0, 'downloadAndUpgrade': 1.
                           gemtekDevCpeTftpUpgradeAdminStatus 1.3.6.1.4.1.10529.300.69.4 integer read-only
Device status information on the progress of the upgrade. Enumeration: 'ready': 0, 'downloading': 1, 'installing': 2, 'success': 4, 'error': 3.