MY-INTERFACE-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: MY-INTERFACE-MIB
Download as:   
SNMPv2-CONF, MY-SMI, IF-MIB, SNMPv2-SMI, P-BRIDGE-MIB, Q-BRIDGE-MIB, MY-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 myInterfaceMIB 1.3.6.1.4.1.171.10.97.2.10
This module defines my interface mibs.
       myIfConfigMIBObjects 1.3.6.1.4.1.171.10.97.2.10.1
           myIfTable 1.3.6.1.4.1.171.10.97.2.10.1.1 no-access
list of interface basic configuration objects.
               myIfEntry 1.3.6.1.4.1.171.10.97.2.10.1.1.1 no-access
Entry contains interface basic configurations.
                   myIfIndex 1.3.6.1.4.1.171.10.97.2.10.1.1.1.1 ifindex read-only
                   myIfPortType 1.3.6.1.4.1.171.10.97.2.10.1.1.1.2 integer read-only
Port type of this port, list as above. port100MBASEFX indicates that port is port100MBASEFXL or port100MBASEFXS, and system doesn't distinguish. port1000MBASEFX indicates that port is port1000MBASEFLX or port1000MBASEFSX, and system doesn't distinguish. This attribute apply physical port Enumeration: 'port10GBASESW': 16, 'port10GBASEER': 14, 'port1000MBASETX': 7, 'port10GBASESR': 12, 'port100MBASEFXS': 4, 'port1000MBASESX': 5, 'port10GBASEEW': 18, 'unknown': 1, 'portSFP': 11, 'port100MBASEFX': 9, 'port10GBASELR': 13, 'port10GBASELX4': 15, 'port10GBASE': 19, 'port10M100MBASETX': 2, 'port10GBASELW': 17, 'port100MBASEFXL': 3, 'portGBIC': 8, 'port1000MBASELX': 6, 'port1000MBASEFX': 10.
                   myIfFlowControlAdminStatus 1.3.6.1.4.1.171.10.97.2.10.1.1.1.3 integer read-write
Flow control of a port management status. This attribute apply physical port and aggreate port Enumeration: 'disabled': 2, 'autonego': 3, 'enabled': 1, 'unknown': 4.
                   myIfFlowControlOperStatus 1.3.6.1.4.1.171.10.97.2.10.1.1.1.4 enabledstatus read-only
Oper status: after the negotiation between two ports connetted the flow contrl status. This attribute apply physical port and aggreate port
                   myIfAdminSpeed 1.3.6.1.4.1.171.10.97.2.10.1.1.1.5 integer read-write
port speed settings. This attribute apply physical port and aggreate port Enumeration: 'speed10Gb': 5, 'speed10Mb': 1, 'autonego': 4, 'speed100Mb': 2, 'unknown': 6, 'speed1000Mb': 3.
                   myIfAdminDuplex 1.3.6.1.4.1.171.10.97.2.10.1.1.1.6 integer read-write
port duplex settings. This attribute apply physical port and aggreate port Enumeration: 'autonego': 3, 'unknown': 4, 'full': 1, 'half': 2.
                   myIfOperSpeed 1.3.6.1.4.1.171.10.97.2.10.1.1.1.7 integer read-only
After two port have negotiated the speed status,and this object is the working speed status. while the port link status is down , then the speed status is unknown(4). This attribute apply physical port and aggreate port Enumeration: 'speed100Mb': 2, 'speed1000Mb': 3, 'speed10Gb': 5, 'speed10Mb': 1, 'unknown': 4.
                   myIfOperDuplex 1.3.6.1.4.1.171.10.97.2.10.1.1.1.8 integer read-only
After two port have negotiated the duplex status, and this object is the working duplex status. while the port link status is down , then the speed status is unknown(3). This attribute apply physical port and aggreate port Enumeration: 'unknown': 3, 'full': 1, 'half': 2.
                   myIfManageStatus 1.3.6.1.4.1.171.10.97.2.10.1.1.1.9 enabledstatus read-write
Management status of the interface.
                   myIfIpBroadcast 1.3.6.1.4.1.171.10.97.2.10.1.1.1.10 ipaddress read-write
Broadcast address of the interface. if broadcast address not configured on interface, return 0.0.0.0
                   myIfLayer 1.3.6.1.4.1.171.10.97.2.10.1.1.1.11 integer read-write
Enumeration: 'layer-3': 2, 'layer-2': 1.
                   myIfMode 1.3.6.1.4.1.171.10.97.2.10.1.1.1.12 integer read-write
This value is meaning for only physical port and aggreate port Enumeration: 'promiscuous': 8, 'hybrid': 4, 'access': 1, 'host': 7, 'other': 5, 'trunk': 2, 'uplink': 6, 'dot1q-tunnel': 3.
                   myIfCounterClear 1.3.6.1.4.1.171.10.97.2.10.1.1.1.13 integer32 read-write
Setting its to any value but 0, will clear counters of this interface. Setting its value to 0 will cause no action of the agent. and when query will always return 0.
                   myIfEntryStatus 1.3.6.1.4.1.171.10.97.2.10.1.1.1.14 configstatus read-only
Status of this entry, set this object to valid will create a interface, and set its value to invalid will delete the interface of this entry.
                   myIfMediumType 1.3.6.1.4.1.171.10.97.2.10.1.1.1.15 integer read-write
Port medium type of this port,fiber or copper. Enumeration: 'unknown': 0, 'fiber': 2, 'copper': 1.
           myIfIpTable 1.3.6.1.4.1.171.10.97.2.10.1.2 no-access
A list of interface ip configuration entries.
               myIfIpEntry 1.3.6.1.4.1.171.10.97.2.10.1.2.1 no-access
An entry containing configuration information applicable to a Layer3 interface.
                   myIfIpIfIndex 1.3.6.1.4.1.171.10.97.2.10.1.2.1.1 ifindex read-only
A unique value, for each Layer3 interface.
                   myIfIpId 1.3.6.1.4.1.171.10.97.2.10.1.2.1.2 integer read-only
Type of interface ip address. Enumeration: 'primary': 1, 'secondary': 2.
                   myIfIp 1.3.6.1.4.1.171.10.97.2.10.1.2.1.3 ipaddress read-only
Ip address of the interface myIfIndex refer to.
                   myIfIpMask 1.3.6.1.4.1.171.10.97.2.10.1.2.1.4 ipaddress read-write
Ip mask of the interface ip address.
                   myIfIpEntryStatus 1.3.6.1.4.1.171.10.97.2.10.1.2.1.5 rowstatus read-only
entry status of this entry. and the means in this enviraments can reffer to the text-convention definition of the RowStatus.
           myIfStatusTable 1.3.6.1.4.1.171.10.97.2.10.1.3 no-access
list of interface status. Status information include some error state and result of examining to the interface,etc.
               myIfStatusEntry 1.3.6.1.4.1.171.10.97.2.10.1.3.1 no-access
Entry contains interface status information.
                   myIfStatusIndex 1.3.6.1.4.1.171.10.97.2.10.1.3.1.1 ifindex read-only
                   myIfStatusLoopBackExamine 1.3.6.1.4.1.171.10.97.2.10.1.3.1.2 integer32 read-write
Setting its to any value but 0, will Checking whether this port or aggreate can receive and send packets normally, It indicates that port or aggreate is normal if opertion is success. Setting its value to 0 will cause no action of the agent. and when query will always return 0. This attribute apply physical port and aggreate port
                   myIfErrorStatus 1.3.6.1.4.1.171.10.97.2.10.1.3.1.3 integer read-only
Port's error status information Enumeration: 'no-error': 1, 'err-disable-bpduguard': 2, 'err-disable-ptsecurity': 3.
                   myIfLineDetect 1.3.6.1.4.1.171.10.97.2.10.1.3.1.4 integer32 read-only
When reading this object, system detects the quality of line connecting the port. Detect whether the line is broken or short circuit or not. The meaning of the obtained value: Return value=N*10000000+M N stands for the line state (0: perfect; 1: break; 2: short circuit) M stands for the location of the break or short circuit in the line(distance from the switch port, in metre) If the line is perfect, the value is zero.
           myGlobalIfDisableRecovery 1.3.6.1.4.1.171.10.97.2.10.1.4 integer32 read-write
Setting its to any value but 0, the interfaces which is shutted down by some error happened will recovery from disabled status . Setting its value to 0 will cause no action of the agent. and when query will always return 0. This attribute apply physical port and aggreate port
           myPortTypeChooseTable 1.3.6.1.4.1.171.10.97.2.10.1.5 no-access
Table of entrance to choose port type.
               myPortTypeChooseEntry 1.3.6.1.4.1.171.10.97.2.10.1.5.1 no-access
Entrance to choose port type.
                   myPortTypeChooseIndex 1.3.6.1.4.1.171.10.97.2.10.1.5.1.1 ifindex read-only
The logic port number.
                   myPortTypeChooseType 1.3.6.1.4.1.171.10.97.2.10.1.5.1.2 integer read-only
The chosen port type. This object is used to choose one of the multiple physical ports of different types, when the same logical port is correspondent with them. Apply this attribute to the physical port only. Enumeration: 'copper': 2, 'fiber': 1.
           myIfMTUTable 1.3.6.1.4.1.171.10.97.2.10.1.6 no-access
Access table of MTU on interface.
               myIfMTUEntry 1.3.6.1.4.1.171.10.97.2.10.1.6.1 no-access
Interfac MTU access.
                   myIfMTUIndex 1.3.6.1.4.1.171.10.97.2.10.1.6.1.1 ifindex read-only
Interface number
                   myIfMTU 1.3.6.1.4.1.171.10.97.2.10.1.6.1.2 integer32 read-write
Interface MTU.
           myIfAvailableBWTable 1.3.6.1.4.1.171.10.97.2.10.1.7 no-access
Access table of Available Bandwidth on interface.
               myIfAvailableBWEntry 1.3.6.1.4.1.171.10.97.2.10.1.7.1 no-access
Interfac available bandwidth access.
                   myIfAvailableBWIfIndex 1.3.6.1.4.1.171.10.97.2.10.1.7.1.1 ifindex read-only
Interface number
                   myIfAvailableBWIfBW 1.3.6.1.4.1.171.10.97.2.10.1.7.1.2 gauge read-only
Interface available bandwidth(bit).
       myInterfaceTraps 1.3.6.1.4.1.171.10.97.2.10.2
           lineDetectStatus 1.3.6.1.4.1.171.10.97.2.10.2.1 integer no-access
The type of storm of interface Enumeration: 'open': 2, 'short': 3, 'ok': 1.
           lineDetectPosition 1.3.6.1.4.1.171.10.97.2.10.2.2 integer32 no-access
Location where the break or short circuit in the line happens (Distance from the switch port, in metre.)
           lineQualityDetect 1.3.6.1.4.1.171.10.97.2.10.2.3
The notification of discovering a break or short circuit in the line, or restoring the line to the normal state.
       myInterfaceMIBConformance 1.3.6.1.4.1.171.10.97.2.10.3
           myInterfaceMIBCompliances 1.3.6.1.4.1.171.10.97.2.10.3.1
               myInterfaceMIBCompliance 1.3.6.1.4.1.171.10.97.2.10.3.1.1
The compliance statement for entities which implement the My Interface MIB
           myInterfaceMIBGroups 1.3.6.1.4.1.171.10.97.2.10.3.2
               myInterfaceMIBGroup 1.3.6.1.4.1.171.10.97.2.10.3.2.1
A collection of objects providing interface basic configure .
               myPortTypeChooseMibGroup 1.3.6.1.4.1.171.10.97.2.10.3.2.2
Information collection of choosing port type.
               myIfMTUMibGroup 1.3.6.1.4.1.171.10.97.2.10.3.2.3
Interface MTU information collection.
               myIfLineDetectGroup 1.3.6.1.4.1.171.10.97.2.10.3.2.4
Information collection of line quality detection.
               myIfAvailableBWMibGroup 1.3.6.1.4.1.171.10.97.2.10.3.2.5
Interface available bandwidth information collection.