MY-ACL-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: MY-ACL-MIB
Download as:   
SNMPv2-CONF, MY-SMI, SNMPv2-SMI, MY-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 myAclMIB 1.3.6.1.4.1.171.10.97.2.17
This module defines my acl mibs.
       myAclMIBObjects 1.3.6.1.4.1.171.10.97.2.17.1
           myAclTable 1.3.6.1.4.1.171.10.97.2.17.1.1 no-access
A table of acl request entries.
               myAclEntry 1.3.6.1.4.1.171.10.97.2.17.1.1.1 no-access
Entry contains acl name and mode.
                   myAclName 1.3.6.1.4.1.171.10.97.2.17.1.1.1.1 displaystring read-only
Access list name of this entry.This value is unique for every entry When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail.
                   myAclMode 1.3.6.1.4.1.171.10.97.2.17.1.1.1.2 integer read-only
Config mode of this ACL Enumeration: 'acl-expert': 4, 'acl-ip-extended': 2, 'acl-mac-extended': 3, 'acl-ipv6-extended': 5, 'acl-ip-standard': 1.
                   myAclEntryStatus 1.3.6.1.4.1.171.10.97.2.17.1.1.1.3 configstatus read-only
Status of this entry, set its value to invalid will delete this entry. set its value to valid has no effect.
           myAclIfTable 1.3.6.1.4.1.171.10.97.2.17.1.3 no-access
list of ACL interface objects.
               myAclIfEntry 1.3.6.1.4.1.171.10.97.2.17.1.3.1 no-access
Entry ACL interface information.
                   myAclIfIndex 1.3.6.1.4.1.171.10.97.2.17.1.3.1.1 ifindex read-only
                   myAclIfMaxEntryNum 1.3.6.1.4.1.171.10.97.2.17.1.3.1.2 integer32 read-only
Max num of ACL entry(ACE) in a interface.
                   myAclIfCurruntEntryNum 1.3.6.1.4.1.171.10.97.2.17.1.3.1.3 integer32 read-only
Currunt valid num of ACL entry(ACE) in a interface.
                   myIfInAclName 1.3.6.1.4.1.171.10.97.2.17.1.3.1.4 displaystring read-write
Access list name of ACL of this interface match for input. It indicate that this interface doesn't match any ACL for input if this string is null
                   myIfOutAclName 1.3.6.1.4.1.171.10.97.2.17.1.3.1.5 displaystring read-write
Access list name of ACL of this interface match for output. It indicate that this interface doesn't match any ACL for output if this string is null This relation function apply only L3 interface.
           myAceExtTable 1.3.6.1.4.1.171.10.97.2.17.1.4 no-access
A table of ACE request entries.
               myAceExtEntry 1.3.6.1.4.1.171.10.97.2.17.1.4.1 no-access
Entry contains ace parameters and results. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to a ace entry of a acl. The station should then create the associated entry. We must set all specifies valid values for the non-defaulted configuration objects, certainly, it should also modify the default values for the other configuration objects if the defaults are not appropriate. Once the appropriate instance of all the configuration objects have been created or set,the row status should be set to active to initiate the request.
                   myAceExtAclName 1.3.6.1.4.1.171.10.97.2.17.1.4.1.1 displaystring read-only
Access list name of this ace belong to. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identifier corresponds first character of string). The number of sub-identifiers of this string must be 32,If length of string is less than 32 the sub-identifier(0x0) will be filled in tail.
                   myAceExtIndex 1.3.6.1.4.1.171.10.97.2.17.1.4.1.2 integer32 read-only
Object which specifies a unique entry in the myAclTable. A management station wishing to initiate a acl operation should use a pseudo-random value for this object when creating or modifying an instance of a myAclEntry. The RowStatus semantics of the myAclEntryStatus object will prevent access conflicts.
                   myAceExtIfAnyVID 1.3.6.1.4.1.171.10.97.2.17.1.4.1.3 truthvalue read-write
VID of class will not be checked if this value is true.
                   myAceExtVID 1.3.6.1.4.1.171.10.97.2.17.1.4.1.4 unsigned32 read-write
VID of Ace flow definition.
                   myAceExtIfAnySourceIp 1.3.6.1.4.1.171.10.97.2.17.1.4.1.5 truthvalue read-write
Source Ip of class will not be checked if this value is true.
                   myAceExtSourceIp 1.3.6.1.4.1.171.10.97.2.17.1.4.1.6 ipaddress read-write
Sourece ip address of Ace flow definition.
                   myAceExtIfAnySourceWildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.7 truthvalue read-write
Source Ip wild card of class will not be checked if this value is true.
                   myAceExtSourceWildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.8 ipaddress read-write
Sourece ip wild card(in reverse ip address mask)of Ace flow definition.
                   myAceExtIfAnySourceMacAddr 1.3.6.1.4.1.171.10.97.2.17.1.4.1.9 truthvalue read-write
Source mac address of class will not be checked if this value is true.
                   myAceExtSourceMacAddr 1.3.6.1.4.1.171.10.97.2.17.1.4.1.10 macaddress read-write
Sourece Mac address of Ace flow definition.
                   myAceExtIfAnyDestIp 1.3.6.1.4.1.171.10.97.2.17.1.4.1.11 truthvalue read-write
Destination Ip wild card of class will not be checked if this value is true.
                   myAceExtDestIp 1.3.6.1.4.1.171.10.97.2.17.1.4.1.12 ipaddress read-write
Destination ip address of Ace flow definition.
                   myAceExtIfAnyDestWildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.13 truthvalue read-write
Source Ip wild card of class will not be checked if this value is true.
                   myAceExtDestIpWildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.14 ipaddress read-write
Destination ip wild card(in reverse ip address mask) of Ace flow definition.
                   myAceExtIfAnyDestMacAddr 1.3.6.1.4.1.171.10.97.2.17.1.4.1.15 truthvalue read-write
Source Ip wild card of class will not be checked if this value is true.
                   myAceExtDestMacAddr 1.3.6.1.4.1.171.10.97.2.17.1.4.1.16 macaddress read-write
Destination Mac address of Ace flow definition.
                   myAceExtIfAnyEtherLikeType 1.3.6.1.4.1.171.10.97.2.17.1.4.1.17 truthvalue read-write
Ether Like Type in MAC packet will not be checked if this value is true.
                   myAceExtEtherLikeType 1.3.6.1.4.1.171.10.97.2.17.1.4.1.18 integer32 read-write
Ether Like Type in MAC packet of Ace flow definition.
                   myAceExtIfAnyIpProtocolField 1.3.6.1.4.1.171.10.97.2.17.1.4.1.19 truthvalue read-write
Source Ip wild card of class will not be checked if this value is true.
                   myAceExtIpProtocolField 1.3.6.1.4.1.171.10.97.2.17.1.4.1.20 integer32 read-write
The value of protocol field in IP packet of Ace flow definition.
                   myAceExtSourceProtocolPort 1.3.6.1.4.1.171.10.97.2.17.1.4.1.21 integer32 read-write
The value of source protocol port in IP packet of Ace flow definition. It is significative only to those protocol which support this field.
                   myAceExtDestProtocolPort 1.3.6.1.4.1.171.10.97.2.17.1.4.1.22 integer32 read-write
The value of destination protocol port in IP packet of Ace flow definition. It is significative only to those protocol which support this field(tcp,udp).
                   myAceExtIfAnyProtocolType 1.3.6.1.4.1.171.10.97.2.17.1.4.1.23 truthvalue read-write
The value of protocol type field in IP packet will not be checked if this value is true.
                   myAceExtProtocolType 1.3.6.1.4.1.171.10.97.2.17.1.4.1.24 integer32 read-write
The value of protocol type field in IP packet of Ace flow definition. It is significative only to those protocol which support this field(icmp,igmp).
                   myAceExtFlowAction 1.3.6.1.4.1.171.10.97.2.17.1.4.1.25 integer read-write
Permit indicate that the kind of flow which entry define will be allow to access , deny indicate that the kind of flow which entry define will be refuse to access Enumeration: 'deny': 2, 'permit': 1.
                   myAceExtEntryStauts 1.3.6.1.4.1.171.10.97.2.17.1.4.1.26 rowstatus read-only
entry status for this list.
                   myAceExtTimeRangeName 1.3.6.1.4.1.171.10.97.2.17.1.4.1.27 displaystring read-write
Name of time-range of this ACE match. It indicate that this ACE doesn't match any time-range if this string is null
                   myAceExtSourcePortOp 1.3.6.1.4.1.171.10.97.2.17.1.4.1.28 integer read-write
noOperator(1), which is the default value, means that no comparison is to be made with the Source TCP/UDP port number. lt(2) means less than. gt(3) means greater than. eq(4) means equal. neq(5) means not equal. Enumeration: 'gt': 3, 'lt': 2, 'noOperator': 1, 'range': 6, 'eq': 4, 'neq': 5.
                   myAceExtSourceProtocolPortRange 1.3.6.1.4.1.171.10.97.2.17.1.4.1.29 integer32 read-write
The ending value of source protocol port in IP packet of Ace flow definition. It is significative only to those protocol which support this field. The myAceExtSourcePortOp must set to range(6).
                   myAceExtDestPortOp 1.3.6.1.4.1.171.10.97.2.17.1.4.1.30 integer read-write
noOperator(1), which is the default value, means that no comparison is to be made with the Dest TCP/UDP port number. lt(2) means less than. gt(3) means greater than. eq(4) means equal. neq(5) means not equal. Enumeration: 'gt': 3, 'lt': 2, 'noOperator': 1, 'range': 6, 'eq': 4, 'neq': 5.
                   myAceExtDestProtocolPortRange 1.3.6.1.4.1.171.10.97.2.17.1.4.1.31 integer32 read-write
The ending value of dest protocol port in IP packet of Ace flow definition. It is significative only to those protocol which support this field. The myAceExtSourcePortOp must set to range(6).
                   myAceExtIfAnyCos 1.3.6.1.4.1.171.10.97.2.17.1.4.1.32 truthvalue read-write
Cos will not be checked if this value is true.
                   myAceExtCos 1.3.6.1.4.1.171.10.97.2.17.1.4.1.33 integer32 read-write
Cos of Ace flow definition.
                   myAceExtIfAnyIpPrec 1.3.6.1.4.1.171.10.97.2.17.1.4.1.34 truthvalue read-write
Ip precedence will not be checked if this value is true.
                   myAceExtIpPrec 1.3.6.1.4.1.171.10.97.2.17.1.4.1.35 integer32 read-write
Ip precedence of Ace flow definition.
                   myAceExtIfAnyDscp 1.3.6.1.4.1.171.10.97.2.17.1.4.1.36 truthvalue read-write
Dscp will not be checked if this value is true.
                   myAceExtDscp 1.3.6.1.4.1.171.10.97.2.17.1.4.1.37 integer32 read-write
Dscp of Ace flow definition.
                   myAceExtIfAnyTcpFlag 1.3.6.1.4.1.171.10.97.2.17.1.4.1.38 truthvalue read-write
Tcp flag will not be checked if this value is true.
                   myAceExtTcpFlag 1.3.6.1.4.1.171.10.97.2.17.1.4.1.39 integer32 read-write
Tcp flag of Ace flow definition.
                   myAceExtIfAnySourceMacAddrWildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.40 truthvalue read-write
Source mac address wildcard of class will not be checked if this value is true.
                   myAceExtSourceMacAddrWildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.41 macaddress read-write
Sourece Mac address wildcard of Ace flow definition.
                   myAceExtIfAnyDestMacAddrWildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.42 truthvalue read-write
Dest mac address wildcard of class will not be checked if this value is true.
                   myAceExtDestMacAddrWildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.43 macaddress read-write
Dest Mac address wildcard of Ace flow definition.
                   myAceExtIfAnySourceIp6 1.3.6.1.4.1.171.10.97.2.17.1.4.1.44 truthvalue read-write
Source Ipv6 address of class will not be checked if this value is true.
                   myAceExtSourceIp6 1.3.6.1.4.1.171.10.97.2.17.1.4.1.45 octet string read-write
Sourece ipv6 address of Ace flow definition.
                   myAceExtIfAnySourceIp6WildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.46 truthvalue read-write
Source Ipv6 address wild card of class will not be checked if this value is true.
                   myAceExtSourceIp6WildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.47 octet string read-write
Sourece ipv6 address wild card(in reverse ip address mask)of Ace flow definition.
                   myAceExtIfAnyDestIp6 1.3.6.1.4.1.171.10.97.2.17.1.4.1.48 truthvalue read-write
Dest Ipv6 address of class will not be checked if this value is true.
                   myAceExtDestIp6 1.3.6.1.4.1.171.10.97.2.17.1.4.1.49 octet string read-write
Dest ipv6 address of Ace flow definition.
                   myAceExtIfAnyDestIp6WildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.50 truthvalue read-write
Dest Ipv6 address wild card of class will not be checked if this value is true.
                   myAceExtDestIp6WildCard 1.3.6.1.4.1.171.10.97.2.17.1.4.1.51 octet string read-write
Dest ipv6 address wild card(in reverse ip address mask)of Ace flow definition.
       myAclMIBConformance 1.3.6.1.4.1.171.10.97.2.17.2
           myAclMIBCompliances 1.3.6.1.4.1.171.10.97.2.17.2.1
               myAclMIBCompliance 1.3.6.1.4.1.171.10.97.2.17.2.1.1
The compliance statement for entities which implement the My Acl MIB
           myAclMIBGroups 1.3.6.1.4.1.171.10.97.2.17.2.2
               myAclMIBGroup 1.3.6.1.4.1.171.10.97.2.17.2.2.1
A collection of objects providing acl (echo) ability to a My agent.