MWR-ETHERNET-MIB: View SNMP OID List / Download MIB

VENDOR: DRAGONWAVE


 Home MIB: MWR-ETHERNET-MIB
Download as:   
SNMPv2-CONF, EQUIPMENT-COMMON-MIB, DWI-HARMONY-PRIVATE-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mwrPlatformObjId 1.3.6.1.4.1.7262.4.5.1
     mwrEbandObjId 1.3.6.1.4.1.7262.4.5.1.1
     mwrEnhancedObjId 1.3.6.1.4.1.7262.4.5.1.2
 mwrSystem 1.3.6.1.4.1.7262.4.5.2
     mwrSystemConfigurations 1.3.6.1.4.1.7262.4.5.2.1
         mwrSystemType 1.3.6.1.4.1.7262.4.5.2.1.1 integer read-write
Available system types for single carrier and multi carriers systems are: onePlusZero1cr - 1+0 single carrier onePlusZero2cr - 1+0 dual carriers onePlusZero2crXpic - 1+0 dual carriers XPIC Enumeration: 'onePlusZero2cr': 2, 'onePlusZero2crXpic': 3, 'onePlusZero1cr': 1.
         mwrPacketSwitchMode 1.3.6.1.4.1.7262.4.5.2.1.2 integer read-write
In bridge mode the system is always inband managed on any of the user ports. However in port-isolation mode, the system can be managed outOfBand or inband on a specific port. Enumeration: 'bridge': 1, 'port-isolation': 2.
         mwrSysSpeed 1.3.6.1.4.1.7262.4.5.2.1.3
             mwrSystemCurrentSpeed 1.3.6.1.4.1.7262.4.5.2.1.3.1 integer32 read-write
Changes the working speed of the system.
     mwrSystemStatus 1.3.6.1.4.1.7262.4.5.2.2
         mwrSystemOperStatus 1.3.6.1.4.1.7262.4.5.2.2.1 integer read-only
The current operational state of the system. Enumeration: 'down': 2, 'up': 1.
         mwrSystemFaultSeverity 1.3.6.1.4.1.7262.4.5.2.2.2 integer read-only
The current state of the most serious system alarm severity. If system is running diagnostics, the status will be test. Enumeration: 'major': 5, 'noAlarm': 1, 'warning': 3, 'critical': 6, 'test': 2, 'minor': 4.
         mwrSystemTemperature 1.3.6.1.4.1.7262.4.5.2.2.3 integer32 read-only
The current system temperature.
         mwrPlatformType 1.3.6.1.4.1.7262.4.5.2.2.4 integer read-only
Identifies the system platform type. The possible system types are: - eband - enhanced - enhanced-mc Enumeration: 'enhanced-mc': 3, 'eband': 1, 'enhanced': 2.
         mwrPacketSwitchModeStatus 1.3.6.1.4.1.7262.4.5.2.2.5 integer read-only
This object indicates the running configuration for the packet switch mode. Enumeration: 'bridge': 1, 'port-isolation': 2.
         mwrSystemTypeStatus 1.3.6.1.4.1.7262.4.5.2.2.6 integer read-only
This object indicates the running configuration for the system type status. Enumeration: 'onePlusZero2cr': 2, 'onePlusZero2crXpic': 3, 'onePlusZero1cr': 1.
     mwrSystemCommands 1.3.6.1.4.1.7262.4.5.2.3
         mwrResetSystem 1.3.6.1.4.1.7262.4.5.2.3.1 integer read-write
Writing '1' to this object resets the system. Enumeration: 'reset': 1.
         mwrSaveConfig 1.3.6.1.4.1.7262.4.5.2.3.2 integer read-write
Writing '1' or 'save' to this object saves running configuration of the system. Enumeration: 'save': 1.
         mwrDeleteConfig 1.3.6.1.4.1.7262.4.5.2.3.3 integer read-write
Using this object, either the startup config or the switch config can be deleted. Deleting startup config removes all system configuration for next system restart. Deleting switch config only clears the switch configuration. Enumeration: 'switch': 2, 'startup': 1.
     mwrSystemInventory 1.3.6.1.4.1.7262.4.5.2.4
         mwrHwInventory 1.3.6.1.4.1.7262.4.5.2.4.1
             mwrMacAddress 1.3.6.1.4.1.7262.4.5.2.4.1.1 displaystring read-only
The MAC Address of the system.
             mwrTargetCfgFilePartNumber 1.3.6.1.4.1.7262.4.5.2.4.1.2 displaystring read-only
A textual string containing part number of the target configuration file.
             mwrUnitSerialNo 1.3.6.1.4.1.7262.4.5.2.4.1.3 displaystring read-only
A textual string containing Serial Number of the Unit.
             mwrUnitAssemblyNo 1.3.6.1.4.1.7262.4.5.2.4.1.4 displaystring read-only
A textual string containing the Assembly Number of the Unit.
             mwrBasebandSerialNo 1.3.6.1.4.1.7262.4.5.2.4.1.5 displaystring read-only
A textual string containing Serial no of the baseband.
             mwrBasebandAssemblyNo 1.3.6.1.4.1.7262.4.5.2.4.1.6 displaystring read-only
A textual string containing assembly no of the baseband.
             mwrPsuSerialNo 1.3.6.1.4.1.7262.4.5.2.4.1.7 displaystring read-only
A textual string containing Serial no of the PSU.
             mwrPsuAssemblyNo 1.3.6.1.4.1.7262.4.5.2.4.1.8 displaystring read-only
A textual string containing assembly no of the PSU.
             mwrRfSerialNo 1.3.6.1.4.1.7262.4.5.2.4.1.9 displaystring read-only
A textual string containing Serial no of the RF.
             mwrRfAssemblyNo 1.3.6.1.4.1.7262.4.5.2.4.1.10 displaystring read-only
A textual string containing assembly no of the RF.
             mwrRfRevisionNo 1.3.6.1.4.1.7262.4.5.2.4.1.11 displaystring read-only
A textual string containing revision no of the RF.
             mwrDiplexerSerialNo 1.3.6.1.4.1.7262.4.5.2.4.1.12 displaystring read-only
A textual string containing Serial no of the Diplexer.
             mwrDiplexerAssemblyNo 1.3.6.1.4.1.7262.4.5.2.4.1.13 displaystring read-only
A textual string containing assembly no of the Diplexer.
             mwrSystemCleiNo 1.3.6.1.4.1.7262.4.5.2.4.1.14 displaystring read-only
A textual string containing system CLEI code.
         mwrSwInventory 1.3.6.1.4.1.7262.4.5.2.4.2
             mwrSwInventoryTable 1.3.6.1.4.1.7262.4.5.2.4.2.1 no-access
Table containing the software inventory.
                 mwrSwInventoryEntry 1.3.6.1.4.1.7262.4.5.2.4.2.1.1 no-access
Software inventory entry.
                     mwrSwInvBank 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.1 integer no-access
Software bank in the flash. Enumeration: 'bankB': 2, 'bankA': 1.
                     mwrSwInvStatus 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.2 integer read-only
Software bank status. Enumeration: 'active': 1, 'backup': 2.
                     mwrSwInvOmniRelease 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.3 displaystring read-only
The version number of the Omni.
                     mwrSwInvTargetConfFileVersion 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.4 displaystring read-only
The version number of the target configuration file.
                     mwrSwInvMibVersion 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.5 displaystring read-only
The version number of the system MIB.
                     mwrSwInvSecurityVersion 1.3.6.1.4.1.7262.4.5.2.4.2.1.1.6 displaystring read-only
The version number of the security package.
     mwrSystemNotifications 1.3.6.1.4.1.7262.4.5.2.5
         mwrSysTcfInvalid 1.3.6.1.4.1.7262.4.5.2.5.1
This notification is raised when The HW specific factory defined information (TCF) in the system is not valid.
         mwrSysTempOutOfLimit 1.3.6.1.4.1.7262.4.5.2.5.2
This notification is raised when the system temperature is out of limits.
 mwrSoftware 1.3.6.1.4.1.7262.4.5.3
     mwrSoftwareConfigurations 1.3.6.1.4.1.7262.4.5.3.1
     mwrSoftwareStatus 1.3.6.1.4.1.7262.4.5.3.2
         mwrSwBackupBankStatus 1.3.6.1.4.1.7262.4.5.3.2.1 integer read-only
This object represents the status of the backup bank. Enumeration: 'valid': 2, 'upgrading': 3, 'notValid': 1.
     mwrSoftwareCommands 1.3.6.1.4.1.7262.4.5.3.3
         mwrSwCommit 1.3.6.1.4.1.7262.4.5.3.3.1 integer read-write
Writing '1' to this object commits all the active bank settings to the backup bank. Enumeration: 'commit': 1.
         mwrSwSwitchBanks 1.3.6.1.4.1.7262.4.5.3.3.2 integer read-write
This objects switches bank to the specified bank. Next time the system resets, it loads up from that bank. Enumeration: 'bankB': 2, 'bankA': 1.
     mwrSoftwareNotifications 1.3.6.1.4.1.7262.4.5.3.4
 mwrLicensing 1.3.6.1.4.1.7262.4.5.4
     mwrLicensingConfigurations 1.3.6.1.4.1.7262.4.5.4.1
         mwrLicenseUpgradeKey 1.3.6.1.4.1.7262.4.5.4.1.1 octet string read-write
The 33 Bytes licensing key used for upgrading features/capacity. Reading this object always returns an empty string.
     mwrLicensingStatus 1.3.6.1.4.1.7262.4.5.4.2
         mwrLicenseCount 1.3.6.1.4.1.7262.4.5.4.2.1 integer32 read-only
This object indicates the number of times the system has been upgraded/downgraded with features/capacity.
         mwrLicensedSpeed 1.3.6.1.4.1.7262.4.5.4.2.2 integer32 read-only
This object indicates the system licensed speed.
         mwrLicenseFeaturesTable 1.3.6.1.4.1.7262.4.5.4.2.3 no-access
A table containing supported system licensed features.
             mwrLicenseFeaturesEntry 1.3.6.1.4.1.7262.4.5.4.2.3.1 no-access
A table entry containing supported system licensed features.
                 mwrLicenseFeatureIndex 1.3.6.1.4.1.7262.4.5.4.2.3.1.1 integer32 no-access
This object indicates the list of system features.
                 mwrLicenseFeatureId 1.3.6.1.4.1.7262.4.5.4.2.3.1.2 integer32 read-only
2 ACM (includes WMA where applicable) (LF2) 3 Ethernet UNI (ELINE/ELAN MEF service) (LF3) 4 Packet Fragmentation (LF4) 5 Secured Access (LF5) 6 Ethernet OAM (802.1ag, 802.3ah, Y.1731) (LF6) 7 Advanced Performance Monitoring (LF7) 11 Bandwidth Accelerator (LF11) 13 Header Compression (LF13)
                 mwrLicenseFeature 1.3.6.1.4.1.7262.4.5.4.2.3.1.3 displaystring read-only
The name of the feature.
                 mwrLicenseFeatureStatus 1.3.6.1.4.1.7262.4.5.4.2.3.1.4 integer read-only
Specifies whether the feature is unlicensed or licensed. Enumeration: 'unlicensed': 1, 'licensed': 2.
 mwrSyncE 1.3.6.1.4.1.7262.4.5.5
     mwrSyncEConfigurations 1.3.6.1.4.1.7262.4.5.5.1
         mwrSyncEState 1.3.6.1.4.1.7262.4.5.5.1.1 integer read-write
In manual mode, SyncE source will use primary clock source and when the primary source has loss of lock, the SyncE goes into holdover. The primary source will be used again after the system regains the lock on primary source. In auto mode, if the current clock source goes out of lock, the recovered clock from the other source will be used. Enumeration: 'manual': 2, 'off': 1, 'auto': 3.
         mwrSyncEPrimarySource 1.3.6.1.4.1.7262.4.5.5.1.2 integer read-write
Selects which port to be used as SyncE master clock source. Enumeration: 'radio': 5, 'gi01': 1, 'gi02': 2, 'gi03': 3, 'gi04': 4, 'free-run': 6.
         mwrSyncESecondarySource 1.3.6.1.4.1.7262.4.5.5.1.3 integer read-write
Selects which port to be used as SyncE clock source when the master SyncE clock source is not available. Enumeration: 'radio': 5, 'gi01': 1, 'gi02': 2, 'gi03': 3, 'gi04': 4, 'free-run': 6.
         mwrSyncEMemberPorts 1.3.6.1.4.1.7262.4.5.5.1.4 displaystring read-write
Enter a string indicating all SyncE member ports. Example: gi01 gi04 Port options: gi01 gi02 gi03 gi04 radio
         mwrSyncEForcedHoldover 1.3.6.1.4.1.7262.4.5.5.1.5 displaystring read-write
This forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be taken out. The forced timeout can be 0 to 300sec, where 0 means infinite and default is 30sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter indicates the holdover time in sec. The single quote marks i.e. ' ' are not used in the command.
         mwrSyncERevertive 1.3.6.1.4.1.7262.4.5.5.1.6 displaystring read-write
In revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time is 10sec. An example of the format of the string is as follows: 'on 20' or 'off'. The second parameter when revertive is turned on is the time in sec. The single quote marks i.e. ' ' are not used in the command.
         mwrSyncEWanderFilter 1.3.6.1.4.1.7262.4.5.5.1.7 integer read-write
ITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hierarchy , option1, vs those based on the 1.544kbit/s hierarchy, option2. Option 2 specifies a low pass filter bandwidth of 0.1Hz, while option1 specifies a bandwidth between 1 and 10 Hz. Enumeration: 'option2': 2, 'option1': 1.
     mwrSyncEStatus 1.3.6.1.4.1.7262.4.5.5.2
         mwrSyncEClockSource 1.3.6.1.4.1.7262.4.5.5.2.1 integer read-only
Retrieves SyncE clock source currently in use. Enumeration: 'radio': 5, 'gi01': 1, 'gi02': 2, 'gi03': 3, 'gi04': 4, 'free-run': 6.
         mwrSyncEAcquisitionStatus 1.3.6.1.4.1.7262.4.5.5.2.2 displaystring read-only
Retrieves SyncE acquisition status.
     mwrSyncENotifications 1.3.6.1.4.1.7262.4.5.5.3
         mwrSynceLostLock 1.3.6.1.4.1.7262.4.5.5.3.1
This notification is raised when system has lost synchronization to syncE clock source.
         mwrSynceSecondarySourceInUse 1.3.6.1.4.1.7262.4.5.5.3.2
This notification is raised whens ystem has lost synchronization to primary syncE clock source, and now synchronized to secondary source.
         mwrSynceConfigMismatch 1.3.6.1.4.1.7262.4.5.5.3.3
This notification is raised when the configuration of syncE between the peers in the radio link is mismatched.
 mwrTiming 1.3.6.1.4.1.7262.4.5.6
     mwrTimingConfigurations 1.3.6.1.4.1.7262.4.5.6.1
         mwrDateTime 1.3.6.1.4.1.7262.4.5.6.1.1 dateandtime read-write
The system date and time.
         mwrSntpEnable 1.3.6.1.4.1.7262.4.5.6.1.2 enabletype read-write
Indicates whether SNTP feature is enabled.
         mwrSntpOffset 1.3.6.1.4.1.7262.4.5.6.1.3 integer32 read-write
System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour.
         mwrSntpServerTable 1.3.6.1.4.1.7262.4.5.6.1.4 no-access
Table containing SNTP server entries
             mwrSntpServerEntry 1.3.6.1.4.1.7262.4.5.6.1.4.1 no-access
Contains the SNTP server information
                 mwrSntpServerIndex 1.3.6.1.4.1.7262.4.5.6.1.4.1.1 integer32 no-access
A unique value for each server.
                 mwrSntpServerDomain 1.3.6.1.4.1.7262.4.5.6.1.4.1.2 inetaddresstype read-write
Indicates SNTP server inet address type. Valid types are ipv4 or ipv6.
                 mwrSntpServerAddress 1.3.6.1.4.1.7262.4.5.6.1.4.1.3 inetaddress read-write
Indicates SNTP server inet address octet string.
                 mwrSntpServerStatus 1.3.6.1.4.1.7262.4.5.6.1.4.1.4 integer read-only
The status of the SNTP server. Enumeration: 'failed': 2, 'good': 1.
                 mwrSntpServerStratum 1.3.6.1.4.1.7262.4.5.6.1.4.1.5 integer32 read-only
Specifies the stratum of a server, 0 for failed server
     mwrTimingStatus 1.3.6.1.4.1.7262.4.5.6.2
         mwrTimingLastDateTimeChanged 1.3.6.1.4.1.7262.4.5.6.2.1 dateandtime read-only
Date and Time for the last system time adjustment.
         mwrTimingLastTimeAdjustment 1.3.6.1.4.1.7262.4.5.6.2.2 integer32 read-only
Last system time adjustment in hundredths of seconds.
         mwrTimingCummulativeTimeChange 1.3.6.1.4.1.7262.4.5.6.2.3 integer32 read-only
Cumulative system time adjustment in hundredths of seconds.
     mwrTimingCommands 1.3.6.1.4.1.7262.4.5.6.3
         mwrSntpRestoreDefault 1.3.6.1.4.1.7262.4.5.6.3.1 integer read-write
Restores SNTP servers to default Addresses. Enumeration: 'restore': 1.
     mwrTimingNotifications 1.3.6.1.4.1.7262.4.5.6.4
         mwrSntpServerUnreachable 1.3.6.1.4.1.7262.4.5.6.4.1
This notification is raised when one or more of the configured SNTP server is not reachable by the system.
         mwrSystemTimeCorrected 1.3.6.1.4.1.7262.4.5.6.4.2
This notification is raised change in system time is detected, and system time is adjusted
 mwrAAA 1.3.6.1.4.1.7262.4.5.7
     mwrAAAConfigurations 1.3.6.1.4.1.7262.4.5.7.1
         mwrAAAUserAuthentication 1.3.6.1.4.1.7262.4.5.7.1.1 integer read-write
This object configures the user authentication method. Enumeration: 'internal': 1, 'radius': 2.
         mwrRadiusConfigurations 1.3.6.1.4.1.7262.4.5.7.1.2
             mwrRadiusAdminUserStrict 1.3.6.1.4.1.7262.4.5.7.1.2.1 integer read-write
If strict mode is off, the admin user can login when radius is turned off or unreachable. When strict mode is on, admin user will only be authenticated against the radius server. Enumeration: 'on': 2, 'off': 1.
             mwrRadiusServerTimeOut 1.3.6.1.4.1.7262.4.5.7.1.2.2 integer32 read-write
Timeout period for authentication requests
             mwrRadiusServerDeadTime 1.3.6.1.4.1.7262.4.5.7.1.2.3 integer32 read-write
Time to declare an unresponsive server 'dead'
             mwrRadiusServerReTransmit 1.3.6.1.4.1.7262.4.5.7.1.2.4 integer32 read-write
Maximum number of retransmits to an unresponsive server
             mwrRadiusServerTable 1.3.6.1.4.1.7262.4.5.7.1.2.5 no-access
Table containing radius server entries
                 mwrRadiusServerEntry 1.3.6.1.4.1.7262.4.5.7.1.2.5.1 no-access
Contains the SNTP server information
                     mwrRadiusServerIndex 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.1 integer32 no-access
A unique value for each radius server.
                     mwrRadiusCfgdHostDomain 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.2 inetaddresstype read-write
Indicates configured radius inet address type. Valid types are ipv4 or ipv6.
                     mwrRadiusCfgdHostAddress 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.3 inetaddress read-write
Indicates configured radius server inet address octet string.
                     mwrRadiusCfgdHostKey 1.3.6.1.4.1.7262.4.5.7.1.2.5.1.4 displaystring read-write
The key of the configured radius server.
 mwrNetworking 1.3.6.1.4.1.7262.4.5.8
     mwrNetworkingConfigurations 1.3.6.1.4.1.7262.4.5.8.1
         mwrNetMgmtPriority 1.3.6.1.4.1.7262.4.5.8.1.1
             mwrNetMgmtVlanPriority 1.3.6.1.4.1.7262.4.5.8.1.1.1 integer32 read-write
The object configures the VLAN priority(0...7)
             mwrNetMgmtDscp 1.3.6.1.4.1.7262.4.5.8.1.1.2 integer32 read-write
The Differentiated Services Code Point (DSCP) of IP traffic generated by the system (0...63)
         mwrNetMgmtIpv4 1.3.6.1.4.1.7262.4.5.8.1.2
             mwrIpv4Table 1.3.6.1.4.1.7262.4.5.8.1.2.1 no-access
A table containing the IPv4 information.
                 mwrIpv4Entry 1.3.6.1.4.1.7262.4.5.8.1.2.1.1 no-access
A table entry containing the IPv4 information.
                     mwrIpv4Index 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.1 integer32 no-access
The IPv4 table index. There is only one entry in this table and can not be deleted.
                     mwrIpv4Address 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.2 ipaddress read-write
The IPv4 address of the system.
                     mwrIpv4SubnetMask 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.3 ipaddress read-write
The IPv4 subnet mask of the system.
                     mwrIpv4DefaultGateway 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.4 ipaddress read-write
The IPv4 default gateway of the system.
                     mwrIpv4RowStatus 1.3.6.1.4.1.7262.4.5.8.1.2.1.1.5 rowstatus read-write
This object is used for applying ipv4 configuration attributes simultaneously.
             mwrSecondaryGateway 1.3.6.1.4.1.7262.4.5.8.1.2.2 ipaddress read-write
The IPv4 secondary gateway of the system.
         mwrNetMgmttIpv6 1.3.6.1.4.1.7262.4.5.8.1.3
             mwrIpv6Table 1.3.6.1.4.1.7262.4.5.8.1.3.1 no-access
A table containing the IPv6 information.
                 mwrIpv6Entry 1.3.6.1.4.1.7262.4.5.8.1.3.1.1 no-access
A table entry containing the IPv6 information.
                     mwrIpv6Index 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.1 integer32 no-access
The IPv6 table index. There is only one entry in this table and can not be deleted.
                     mwrIpv6Domain 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.2 inetaddresstype read-only
Indicates ipv6 inet address type.
                     mwrIpv6Address 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.3 inetaddress read-write
Indicates IPv6 inet address octet string.
                     mwrIpv6Prefix 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.4 integer32 read-write
Indicates ipv6 prefix.
                     mwrIpv6GatewayDomain 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.5 inetaddresstype read-only
Indicates IPv6 gateway inet address type. This will always return IPv6 inet address type.
                     mwrIpv6GatewayAddress 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.6 inetaddress read-write
Indicates IPv6 gateway inet address octet string.
                     mwrIpv6RowStatus 1.3.6.1.4.1.7262.4.5.8.1.3.1.1.7 rowstatus read-write
This object is used for applying IPv6 configuration attributes simultaneously.
             mwrSecondaryIpv6GatewayDomain 1.3.6.1.4.1.7262.4.5.8.1.3.2 inetaddresstype read-only
This object will return the secondary IPv6 gateway inet address type.
             mwrSecondaryIpv6GatewayAddress 1.3.6.1.4.1.7262.4.5.8.1.3.3 inetaddress read-write
This object will return the secondary IPv6 gateway inet address.
         mwrUserInterfaceMgmt 1.3.6.1.4.1.7262.4.5.8.1.4
             mwrTelnetEnable 1.3.6.1.4.1.7262.4.5.8.1.4.1 enabletype read-write
Indicates whether telnet access is allowed.
             mwrSshEnable 1.3.6.1.4.1.7262.4.5.8.1.4.2 enabletype read-write
Indicates whether ssh access is allowed. This configuration only applies to security mode.
             mwrHttpEnable 1.3.6.1.4.1.7262.4.5.8.1.4.3 enabletype read-write
Indicates whether http is enabled.
             mwrHttpsEnable 1.3.6.1.4.1.7262.4.5.8.1.4.4 enabletype read-write
Indicates whether secured http access is allowed. This configuration only applies to security mode.
             mwrSnmpv1v2cEnable 1.3.6.1.4.1.7262.4.5.8.1.4.5 enabletype read-write
Indicates whether SNMP v1/v2c is allowed in security mode. This configuration only applies to security mode.
             mwrFtpEnable 1.3.6.1.4.1.7262.4.5.8.1.4.6 enabletype read-write
This object allows enabling or disabling ftp when in secure mode. By default ftp is enabled.
         mwrFileTransfer 1.3.6.1.4.1.7262.4.5.8.1.5
             mwrFileXfrDirection 1.3.6.1.4.1.7262.4.5.8.1.5.1 integer read-write
The behavior of the FTP/SFTP machine: 1 - ServerMode 2 - ClientMode 3 - both Server and Client available Mwr 1.0 just supports Client Mode. Enumeration: 'both': 3, 'clientMode': 2, 'serverMode': 1.
             mwrFileXfrTable 1.3.6.1.4.1.7262.4.5.8.1.5.2 no-access
Table containing the FTP client parameters.
                 mwrFileXfrEntry 1.3.6.1.4.1.7262.4.5.8.1.5.2.1 no-access
Table entry containing the FTP client parameters.
                     mwrFileXfrSeqID 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.1 integer32 no-access
For the same manager, the possibility to define different FTP/SFTP transfer actions.
                     mwrFileXfrIdentifier 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.2 integer read-only
The identifier of the type of file to be imported/exported. Enumeration: 'pmFile': 5, 'eventLog': 4, 'omni': 1, 'configFile': 3, 'tcfFile': 2, 'perfLog': 7, 'security': 6.
                     mwrFileXfrName 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.3 displaystring read-only
The Name of the file to be imported/exported.
                     mwrFileXfrMode 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.4 integer read-only
The file transfer mode specifying either a ftp or sftp request. The sftp mode is only supported when security is licensed/installed. Enumeration: 'ftp': 1, 'sftp': 2.
                     mwrFileXfrServerDomain 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.5 inetaddresstype read-only
The server domain such as IPv4 or IPv6 type.
                     mwrFileXfrServerAddress 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.6 inetaddress read-only
The server IP address in InetAddress format which could be an IPv4 or IPv6 address.
                     mwrFileXfrClientDirection 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.7 integer read-only
The behavior of the FTP or SFTP Client: 1 - import, i.e. download data file 2 - export, i.e. upload data file. The only supported option for omni and tcf is import since these files are used only in upgrade case. Also the supported option for pm, eventlog and perfLog is export option. The rest can be imported or exported. Enumeration: 'import': 1, 'export': 2.
                     mwrFileXfrUserName 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.8 displaystring read-only
FTP or SFTP User Name when Client Mode is selected.
                     mwrFileXfrPassword 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.9 displaystring read-only
FTP or SFTP password when Client Mode is selected. For get operation - the returned value will be zero length string.
                     mwrFileXfrNumEntries 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.10 integer32 read-only
This object is used to indicate the number of entries for the performance log to be transferred. If it's set to zero, it will transfer the entire file.
                     mwrFileXfrStatus 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.11 integer read-only
This object contains the current status of the last requested import/export of the corresponding row component. Enumeration: 'failed': 3, 'inProgress': 2, 'success': 1.
                     mwrFileXfrRowStatus 1.3.6.1.4.1.7262.4.5.8.1.5.2.1.12 rowstatus read-only
The row status variable, used according to: - Manager can create a row using the createAndWait. - Once created, the row is put into notInService by Agent. - On Manager request, row status can be set to active one at a time. This means that the Client has to start the file transfer. - Row data, such as the FileServerAddress, User Name or Password can be changed once the row has been created, but only if this field is set to notInService. All other fields can not be set once the row is created, but the row must be removed and created again. - Manager can use destroy to remove the row.
         mwrNetMgmtInterfaceTable 1.3.6.1.4.1.7262.4.5.8.1.6 no-access
Table containing the network management interface configurations.
             mwrNetMgmtInterfaceEntry 1.3.6.1.4.1.7262.4.5.8.1.6.1 no-access
Entry for the network management interface table.
                 mwrNetMgmtInterfaceIndex 1.3.6.1.4.1.7262.4.5.8.1.6.1.1 integer32 no-access
This object is an index to network management interface table. There will always be one entry in this table.
                 mwrNetMgmtVlanId 1.3.6.1.4.1.7262.4.5.8.1.6.1.2 integer32 read-write
Indicates the VLAN Id (1...4090)
                 mwrNetMgmtInterface1 1.3.6.1.4.1.7262.4.5.8.1.6.1.3 enabletype read-write
When this object is enabled the gi0/1 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
                 mwrNetMgmtInterface1Mode 1.3.6.1.4.1.7262.4.5.8.1.6.1.4 integer read-write
This object indicates whether the gi0/1 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband. Enumeration: 'none': 3, 'outOfBand': 2, 'inband': 1.
                 mwrNetMgmtInterface1Tagged 1.3.6.1.4.1.7262.4.5.8.1.6.1.5 integer read-write
This object indicates whether the system will be managed with vlan tagged management traffic or not. Enumeration: 'vlan-tag': 2, 'no-vlan-tag': 1.
                 mwrNetMgmtInterface2 1.3.6.1.4.1.7262.4.5.8.1.6.1.6 enabletype read-write
When this object is enabled the gi0/2 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
                 mwrNetMgmtInterface2Mode 1.3.6.1.4.1.7262.4.5.8.1.6.1.7 integer read-write
This object indicates whether the gi0/2 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband. Enumeration: 'none': 3, 'outOfBand': 2, 'inband': 1.
                 mwrNetMgmtInterface2Tagged 1.3.6.1.4.1.7262.4.5.8.1.6.1.8 integer read-write
This object indicates whether the system will be managed with vlan tagged management traffic or not. Enumeration: 'vlan-tag': 2, 'no-vlan-tag': 1.
                 mwrNetMgmtInterface3 1.3.6.1.4.1.7262.4.5.8.1.6.1.9 enabletype read-write
When this object is enabled the gi0/3 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
                 mwrNetMgmtInterface3Mode 1.3.6.1.4.1.7262.4.5.8.1.6.1.10 integer read-write
This object indicates whether the gi0/3 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband. Enumeration: 'none': 3, 'outOfBand': 2, 'inband': 1.
                 mwrNetMgmtInterface3Tagged 1.3.6.1.4.1.7262.4.5.8.1.6.1.11 integer read-write
This object indicates whether the system will be managed with vlan tagged management traffic or not. Enumeration: 'vlan-tag': 2, 'no-vlan-tag': 1.
                 mwrNetMgmtInterface4 1.3.6.1.4.1.7262.4.5.8.1.6.1.12 enabletype read-write
When this object is enabled the gi0/4 port will be configured as a management port. Also the corresponding mode (inband/outOfBand) should be set as well.
                 mwrNetMgmtInterface4Mode 1.3.6.1.4.1.7262.4.5.8.1.6.1.13 integer read-write
This object indicates whether the gi0/4 management interface is inband or outOfBand. This applies only when the packet switch mode is configured in port isolation mode. In Bridge mode setup, this will always be inband. Enumeration: 'none': 3, 'outOfBand': 2, 'inband': 1.
                 mwrNetMgmtInterface4Tagged 1.3.6.1.4.1.7262.4.5.8.1.6.1.14 integer read-write
This object indicates whether the system will be managed with vlan tagged management traffic or not. Enumeration: 'vlan-tag': 2, 'no-vlan-tag': 1.
                 mwrNetMgmtInterfaceRowStatus 1.3.6.1.4.1.7262.4.5.8.1.6.1.15 rowstatus read-write
This object is used for applying all management interface configuration in an atomic operation.
     mwrNetworkingStatus 1.3.6.1.4.1.7262.4.5.8.2
         mwrMaintenanceIpv4 1.3.6.1.4.1.7262.4.5.8.2.1
             mwrMaintenanceIpv4Address 1.3.6.1.4.1.7262.4.5.8.2.1.1 ipaddress read-only
This object indicates the maintenance IPv4 address.
             mwrMaintenanceSubnetMask 1.3.6.1.4.1.7262.4.5.8.2.1.2 ipaddress read-only
This object indicates the maintenance IPv4 subnet mask.
             mwrActiveIpv4Gateway 1.3.6.1.4.1.7262.4.5.8.2.1.3 ipaddress read-only
This object indicates the active IPv4 gateway.
         mwrMaintenanceIpv6 1.3.6.1.4.1.7262.4.5.8.2.2
             mwrIpv6LinkLocalIPrefix 1.3.6.1.4.1.7262.4.5.8.2.2.1 integer32 read-only
This object indicates the IPv6 link local prefix.
             mwrIpv6LinkLocalAddress 1.3.6.1.4.1.7262.4.5.8.2.2.2 inetaddress read-only
Indicates ipv6 link local inet address octet string.
             mwrActiveIpv6Gateway 1.3.6.1.4.1.7262.4.5.8.2.2.3 inetaddress read-only
This object indicates the active IPv6 gateway.
     mwrPeerNetworkingStatus 1.3.6.1.4.1.7262.4.5.8.3
         mwrPeerMacAddress 1.3.6.1.4.1.7262.4.5.8.3.1 displaystring read-only
The MAC Address of the peer.
         mwrPeerIpv4Address 1.3.6.1.4.1.7262.4.5.8.3.2 ipaddress read-only
The peer IPv4 Address.
         mwrPeerIpv4SubnetMask 1.3.6.1.4.1.7262.4.5.8.3.3 ipaddress read-only
The peer IPv4 subnet mask.
         mwrPeerIpv4DefaultGateway 1.3.6.1.4.1.7262.4.5.8.3.4 ipaddress read-only
The peer IPv4 default gateway.
         mwrPeerIpv6Prefix 1.3.6.1.4.1.7262.4.5.8.3.5 integer32 read-only
The peer IPv6 prefix.
         mwrPeerIpv6Domain 1.3.6.1.4.1.7262.4.5.8.3.6 inetaddresstype read-only
The peer IPv6 domain.
         mwrPeerIpv6Address 1.3.6.1.4.1.7262.4.5.8.3.7 inetaddress read-only
The peer IPv6 address.
         mwrPeerIpv6GatewayDomain 1.3.6.1.4.1.7262.4.5.8.3.8 inetaddresstype read-only
The peer IPv6 gateway domain
         mwrPeerIpv6GatewayAddress 1.3.6.1.4.1.7262.4.5.8.3.9 inetaddress read-only
The peer IPv6 gateway address.
         mwrPeerVlanId 1.3.6.1.4.1.7262.4.5.8.3.10 integer32 read-only
The peer vlan Id.
         mwrPeerVlanPriority 1.3.6.1.4.1.7262.4.5.8.3.11 integer32 read-only
The peer vlan priority.
         mwrPeerDscp 1.3.6.1.4.1.7262.4.5.8.3.12 integer32 read-only
The peer management dscp.
     mwrNetworkingNotifications 1.3.6.1.4.1.7262.4.5.8.4
 mwrEthernet 1.3.6.1.4.1.7262.4.5.9
     mwrEthernetConfigurations 1.3.6.1.4.1.7262.4.5.9.1
         mwrQos 1.3.6.1.4.1.7262.4.5.9.1.1
             mwrQosState 1.3.6.1.4.1.7262.4.5.9.1.1.1 enabletype read-write
Indicates whether QOS is enabled.
             mwrCosSource 1.3.6.1.4.1.7262.4.5.9.1.1.2 integer read-write
Indicates the class of service tag type. Based on the setting system will use the CoS value in the outer VLAN tag, inner VLAN tag, DSCP or MPLS exp. Enumeration: 'mplsExp': 4, 'oTag': 1, 'dscp': 3, 'iTag': 2.
             mwrOuterTpid 1.3.6.1.4.1.7262.4.5.9.1.1.3 displaystring read-write
Sets the value of the Q-in-Q outer tag. This tag is also used to classify the single tagged traffic. Default value is 0x8100.
             mwrInnerTpid 1.3.6.1.4.1.7262.4.5.9.1.1.4 displaystring read-write
Sets the value of the Q-in-Q inner VLAN tag. Default value is 0x8100.
             mwrCosTable 1.3.6.1.4.1.7262.4.5.9.1.1.5 no-access
A table of Qos Settings per port, the configuration corresponds to the egress QoS of radio port.
                 mwrCosEntry 1.3.6.1.4.1.7262.4.5.9.1.1.5.1 no-access
An entry of Qos setting per port
                     mwrCosIndex 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.1 integer no-access
A unique name identifying each enet port in port isolation mode or the bridgeMode index when system is configured in bridge mode. Enumeration: 'bridgeMode': 5, 'gi01': 1, 'gi02': 2, 'gi03': 3, 'gi04': 4.
                     mwrCos0 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.2 queuetype read-write
User queue assignments for CoS0. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
                     mwrCos1 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.3 queuetype read-write
User queue assignments for CoS1. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
                     mwrCos2 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.4 queuetype read-write
User queue assignments for CoS2. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
                     mwrCos3 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.5 queuetype read-write
User queue assignments for CoS3. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
                     mwrCos4 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.6 queuetype read-write
User queue assignments for CoS4. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
                     mwrCos5 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.7 queuetype read-write
User queue assignments for CoS5. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
                     mwrCos6 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.8 queuetype read-write
User queue assignments for CoS6. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
                     mwrCos7 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.9 queuetype read-write
User queue assignments for CoS7. There are 8 CoS queues. Their corresponding queue numbers are 1 to 8 where 1 is the lowest priority queue and 8 is the highest priority queue.
                     mwrCosRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.5.1.10 rowstatus read-write
Row status for CoS queue mapping. This object is used to apply all CoS settings simultaneously.
             mwrCosDefValueTable 1.3.6.1.4.1.7262.4.5.9.1.1.6 no-access
A table containing the CoS default value, the configuration corresponds to the egress QoS of radio port.
                 mwrCosDefValueEntry 1.3.6.1.4.1.7262.4.5.9.1.1.6.1 no-access
A table entry containing the CoS default value.
                     mwrCosDefValueIndex 1.3.6.1.4.1.7262.4.5.9.1.1.6.1.1 integer no-access
Specifies CoS default value for each port in port isolation or in bridge mode. Enumeration: 'bridgeMode': 5, 'gi01': 1, 'gi02': 2, 'gi03': 3, 'gi04': 4.
                     mwrCosDefValue 1.3.6.1.4.1.7262.4.5.9.1.1.6.1.2 integer32 read-write
Specifies CoS default value for each port in port isolation or in bridge mode.
             mwrCirQTable 1.3.6.1.4.1.7262.4.5.9.1.1.7 no-access
A table containing the CIR value for each queue, the configuration corresponds to the egress QoS of radio port.
                 mwrCirQEntry 1.3.6.1.4.1.7262.4.5.9.1.1.7.1 no-access
A table entry containing the CIR value for each radio queue.
                     mwrCirQIndex 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.1 queuetype no-access
Specifies CIR queue index for each radio queue.
                     mwrCirQ1 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.2 integer32 read-write
User CIR setting for queue 1.
                     mwrCirQ2 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.3 integer32 read-write
User CIR setting for queue 2.
                     mwrCirQ3 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.4 integer32 read-write
User CIR setting for queue 3.
                     mwrCirQ4 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.5 integer32 read-write
User CIR setting for queue 4.
                     mwrCirQ5 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.6 integer32 read-write
User CIR setting for queue 5.
                     mwrCirQ6 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.7 integer32 read-write
User CIR setting for queue 6.
                     mwrCirQ7 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.8 integer32 read-write
User CIR setting for queue 7.
                     mwrCirQ8 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.9 integer32 read-write
User CIR setting for queue 8.
                     mwrCirQRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.7.1.10 rowstatus read-write
The CIR table Row status. This object is used to apply all queue CIR settings simultaneously.
             mwrCbsQTable 1.3.6.1.4.1.7262.4.5.9.1.1.8 no-access
A table containing CBS settings for each queue, the configuration corresponds to the egress QoS of radio port.
                 mwrCbsQEntry 1.3.6.1.4.1.7262.4.5.9.1.1.8.1 no-access
A table entry containing CBS settings for each queue.
                     mwrCbsQIndex 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.1 queuetype no-access
Specifies CBS queue index for each radio queue.
                     mwrCbsQ1 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.2 integer32 read-write
User CBS setting for queue 1.
                     mwrCbsQ2 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.3 integer32 read-write
User CBS setting for queue 2.
                     mwrCbsQ3 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.4 integer32 read-write
User CBS setting for queue 3.
                     mwrCbsQ4 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.5 integer32 read-write
User CBS setting for queue 4.
                     mwrCbsQ5 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.6 integer32 read-write
User CBS setting for queue 5.
                     mwrCbsQ6 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.7 integer32 read-write
User CBS setting for queue 6.
                     mwrCbsQ7 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.8 integer32 read-write
User CBS setting for queue 7.
                     mwrCbsQ8 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.9 integer32 read-write
User CBS setting for queue 8.
                     mwrCbsQRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.8.1.10 rowstatus read-write
The CBS table Row status. This object is used to apply all queue CBS settings simultaneously.
             mwrWeightQTable 1.3.6.1.4.1.7262.4.5.9.1.1.9 no-access
A table containing queue weight setting for each queue, the configuration corresponds to the egress QoS of radio port.
                 mwrWeightQEntry 1.3.6.1.4.1.7262.4.5.9.1.1.9.1 no-access
A table entry containing queue weight setting for each queue.
                     mwrWeightQIndex 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.1 queuetype no-access
Specifies queue weight index for each radio queue.
                     mwrWeightQ1 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.2 integer32 read-write
Specifies queue weight value for queue 1.
                     mwrWeightQ2 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.3 integer32 read-write
Specifies queue weight value for queue 2.
                     mwrWeightQ3 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.4 integer32 read-write
Specifies queue weight value for queue 3.
                     mwrWeightQ4 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.5 integer32 read-write
Specifies queue weight value for queue 4.
                     mwrWeightQ5 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.6 integer32 read-write
Specifies queue weight value for queue 5.
                     mwrWeightQ6 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.7 integer32 read-write
Specifies queue weight value for queue 6.
                     mwrWeightQ7 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.8 integer32 read-write
Specifies queue weight value for queue 7.
                     mwrWeightQ8 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.9 integer32 read-write
Specifies queue weight value for queue 8.
                     mwrWeightQRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.9.1.10 rowstatus read-write
The queue weight table Row status. This object is used to apply all queue weight settings simultaneously.
             mwrQbsQTable 1.3.6.1.4.1.7262.4.5.9.1.1.10 no-access
A table containing queue buffer size, the configuration corresponds to the egress QoS of radio port.
                   mwrQbsQEntry 1.3.6.1.4.1.7262.4.5.9.1.1.10.1 no-access
A table entry containing queue buffer size.
                       mwrQbsQIndex 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.1 queuetype no-access
Specifies QBS queue index for each radio queue.
                       mwrQbsQ1 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.2 integer32 read-write
Specifies queue buffer size (QBS) for queue 1.
                       mwrQbsQ2 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.3 integer32 read-write
Specifies queue buffer size (QBS) for queue 2.
                       mwrQbsQ3 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.4 integer32 read-write
Specifies queue buffer size (QBS) for queue 3.
                       mwrQbsQ4 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.5 integer32 read-write
Specifies queue buffer size (QBS) for queue 4.
                       mwrQbsQ5 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.6 integer32 read-write
Specifies queue buffer size (QBS) for queue 5.
                       mwrQbsQ6 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.7 integer32 read-write
Specifies queue buffer size (QBS) for queue 6.
                       mwrQbsQ7 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.8 integer32 read-write
Specifies queue buffer size (QBS) for queue 7.
                       mwrQbsQ8 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.9 integer32 read-write
Specifies queue buffer size (QBS) for queue 8.
                       mwrQbsQRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.10.1.10 rowstatus read-write
The queue buffer size (QBS) table Row status. This object is used to apply all queue QBS settings simultaneously.
             mwrPolicyQTable 1.3.6.1.4.1.7262.4.5.9.1.1.11 no-access
A table containing queue policy for each queue, the configuration corresponds to the egress QoS of radio port.
                   mwrPolicyQEntry 1.3.6.1.4.1.7262.4.5.9.1.1.11.1 no-access
A table entry containing queue policy for each queue.
                       mwrPolicyQIndex 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.1 queuetype no-access
Specifies queue policy index for each radio queue.
                       mwrPolicyQ1 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.2 integer read-write
User queue policy value for queue 1. Enumeration: 'priority': 2, 'wfq': 1, 'pf': 3.
                       mwrPolicyQ2 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.3 integer read-write
User queue policy value for queue 2. Enumeration: 'priority': 2, 'wfq': 1, 'pf': 3.
                       mwrPolicyQ3 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.4 integer read-write
User queue policy value for queue 3. Enumeration: 'priority': 2, 'wfq': 1, 'pf': 3.
                       mwrPolicyQ4 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.5 integer read-write
User queue policy value for queue 4. Enumeration: 'priority': 2, 'wfq': 1, 'pf': 3.
                       mwrPolicyQ5 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.6 integer read-write
User queue policy value for queue 5. Enumeration: 'priority': 2, 'wfq': 1, 'pf': 3.
                       mwrPolicyQ6 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.7 integer read-write
User queue policy value for queue 6. Enumeration: 'priority': 2, 'wfq': 1, 'pf': 3.
                       mwrPolicyQ7 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.8 integer read-write
User queue policy value for queue 7. Enumeration: 'priority': 2, 'wfq': 1, 'pf': 3.
                       mwrPolicyQ8 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.9 integer read-write
User queue policy value for queue 8. Enumeration: 'priority': 2, 'wfq': 1, 'pf': 3.
                       mwrPolicyQRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.11.1.10 rowstatus read-write
The queue policy table Row status. This object is used to apply all queue policy settings simultaneously.
             mwrUserClassTable 1.3.6.1.4.1.7262.4.5.9.1.1.12 no-access
A table containing QOS user class settings, the configuration corresponds to the egress QoS of radio port.
                   mwrUserClassEntry 1.3.6.1.4.1.7262.4.5.9.1.1.12.1 no-access
A table entry containing QOS user class settings.
                       mwrUserClassIndex 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.1 classtype no-access
Specifies user class queue index for each radio queue.
                       mwrUserClassOffset 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.2 integer32 read-write
Specifies user class offset value.
                       mwrUserClassValue 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.3 displaystring read-write
Specifies user class value.
                       mwrUserClassMask 1.3.6.1.4.1.7262.4.5.9.1.1.12.1.4 displaystring read-write
Specifies user class mask.
             mwrUserFlowTable 1.3.6.1.4.1.7262.4.5.9.1.1.13 no-access
A table containing QOS user flow settings, the configuration corresponds to the egress QoS of radio port.
                   mwrUserFlowEntry 1.3.6.1.4.1.7262.4.5.9.1.1.13.1 no-access
A table entry containing QOS user flow settings.
                       mwrUserFlowIndex 1.3.6.1.4.1.7262.4.5.9.1.1.13.1.1 flowtype no-access
Specifies user flow filter queue index for each queue.
                       mwrUserFlowFilter 1.3.6.1.4.1.7262.4.5.9.1.1.13.1.2 displaystring read-write
Specifies user flow filter value for each queue.
             mwrUserFlowMappingTable 1.3.6.1.4.1.7262.4.5.9.1.1.14 no-access
A table containing QOS user flow mapping settings in port isolation mode.
                   mwrUserFlowMappingEntry 1.3.6.1.4.1.7262.4.5.9.1.1.14.1 no-access
A table entry containing QOS user flow mapping settings in port isolation mode.
                       mwrUserFlowMappingIndex 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.1 flowtype no-access
Specifies user flow mapping index for each flow in port isolation mode.
                       mwrUserFlowMappingState 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.2 enabletype read-write
Enables or disabled user flow mapping for a specific flow in port isolation mode.
                       mwrUserFlowMapping1Q 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.3 queuetype read-write
Specifies the selected queue for gi01 in port isolation mode.
                       mwrUserFlowMapping2Q 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.4 queuetype read-write
Specifies the selected queue for gi02 in port isolation mode.
                       mwrUserFlowMapping3Q 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.5 queuetype read-write
Specifies the selected queue for gi03 in port isolation mode.
                       mwrUserFlowMapping4Q 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.6 queuetype read-write
Specifies the selected queue for gi04 in port isolation mode.
                       mwrUserFlowMappingRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.14.1.7 rowstatus read-write
Row status for user flow mapping in port isolation mode.
             mwrUserFlowMappingBridgeModeTable 1.3.6.1.4.1.7262.4.5.9.1.1.15 no-access
A table containing QOS user flow mapping settings in bridge mode, the configuration corresponds to the egress QoS of radio port.
                   mwrUserFlowMappingBridgeModeEntry 1.3.6.1.4.1.7262.4.5.9.1.1.15.1 no-access
A table entry containing QOS user flow mapping settings in bridge mode.
                       mwrUserFlowMappingBridgeModeIndex 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.1 flowtype no-access
Specifies user flow mapping index for each flow in bridge mode.
                       mwrUserFlowMappingBridgeModeState 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.2 enabletype read-write
Enables or disabled user flow mapping for a specific flow in bridge mode.
                       mwrUserFlowMappingBridgeModeQ 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.3 queuetype read-write
Specifies the selected user flow mapping queue in bridge mode.
                       mwrUserFlowMappingBridgeModeRowStatus 1.3.6.1.4.1.7262.4.5.9.1.1.15.1.4 rowstatus read-write
Row status for user flow mapping in bridge mode.
         mwrEthThresholdAlarm 1.3.6.1.4.1.7262.4.5.9.1.2
             mwrPortThresholdAlarmTable 1.3.6.1.4.1.7262.4.5.9.1.2.1 no-access
A table containing threshold alarms parameters.
                 mwrPortThresholdAlarmEntry 1.3.6.1.4.1.7262.4.5.9.1.2.1.1 no-access
A table entry containing threshold alarms parameters.
                     mwrPortThresholdAlarmIndex 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.1 integer32 no-access
Index to Threshold alarm table. Instance 1 indicates Radio port.
                     mwrDroppedPktsThresholdParams 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.2 displaystring read-write
This object configures the dropped packets threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of packets that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command.
                     mwrOutBWUtilizationThresholdParams 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.3 displaystring read-write
This object configures the BW utilization threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of BW threshold, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command
                     mwrThroughputThresholdParams 1.3.6.1.4.1.7262.4.5.9.1.2.1.1.4 displaystring read-write
This object configures the radio throughput threshold settings. The threshold, in percent and the number of seconds that it must exceed this threshold. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of the throughput, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command
             mwrRadioQThresholdAlarmTable 1.3.6.1.4.1.7262.4.5.9.1.2.2 no-access
A table of radio port queue based Threshold Alarm settings, the configuration corresponds to the egress QoS of radio port.
                 mwrRadioQThresholdAlarmEntry 1.3.6.1.4.1.7262.4.5.9.1.2.2.1 no-access
A table entry of queue based Threshold Alarm settings.
                     mwrRadioQThresholdAlarmIndex 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.1 queuetype read-only
A unique identifier for one of the 8 queues
                     mwrRadioQDepthThresholdParams 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.2 displaystring read-write
The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the percentage of queue depth, the second is the time in seconds that the threshold must be exceeded.
                     mwrRadioQDroppedPktsThresholdParams 1.3.6.1.4.1.7262.4.5.9.1.2.2.1.3 displaystring read-write
The threshold, in packets, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows: '70 10'. The first parameter is the number of packets that are dropped, the second is the time in seconds that the threshold must be exceeded.
     mwrEthernetStatus 1.3.6.1.4.1.7262.4.5.9.2
     mwrEthernetPerformance 1.3.6.1.4.1.7262.4.5.9.3
         mwrEnetPerfPortStatsTable 1.3.6.1.4.1.7262.4.5.9.3.1 no-access
A table containing Ethernet port statistics.
             mwrEnetPerfPortStatsEntry 1.3.6.1.4.1.7262.4.5.9.3.1.1 no-access
A table entry containing Ethernet port statistics.
                 mwrEnetPortStatsIndex 1.3.6.1.4.1.7262.4.5.9.3.1.1.1 integer read-only
A table index to Ethernet ports. Enumeration: 'gi01': 1, 'gi02': 2, 'gi03': 3, 'gi04': 4, 'radio': 5.
                 mwrPortStatsInOctet 1.3.6.1.4.1.7262.4.5.9.3.1.1.2 counter64 read-only
A 64-bit counter representing the incoming octets.
                 mwrPortStatsInGoodPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.3 counter64 read-only
A 64-bit counter representing the incoming good packets.
                 mwrPortStatsInErrPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.4 counter64 read-only
A 64-bit counter representing the incoming error packets.
                 mwrPortStatsInDiscardPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.5 counter64 read-only
A 64-bit counter representing the incoming discarded packets.
                 mwrPortStatsOutOctets 1.3.6.1.4.1.7262.4.5.9.3.1.1.6 counter64 read-only
A 64-bit counter representing the outgoing octets.
                 mwrPortStatsOutGoodPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.7 counter64 read-only
A 64-bit counter representing the outgoing good packets.
                 mwrPortStatsOutErrPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.8 counter64 read-only
A 64-bit counter representing the outgoing error packets.
                 mwrPortStatsOutDiscardPkts 1.3.6.1.4.1.7262.4.5.9.3.1.1.9 counter64 read-only
A 64-bit counter representing the outgoing discarded packets.
                 mwrPortStatsOutBwUtilization 1.3.6.1.4.1.7262.4.5.9.3.1.1.10 integer32 read-only
This object represents the ratio of egress data rate and the egress link capacity of the port. The value is represented in %.
                 mwrPortStatsInBwUtilization 1.3.6.1.4.1.7262.4.5.9.3.1.1.11 integer32 read-only
This object represents the ratio of ingress data rate and the ingress link capacity of the port. The value is represented in %.
                 mwrPortStatsInDataRate 1.3.6.1.4.1.7262.4.5.9.3.1.1.12 integer32 read-only
The Ethernet data rate coming into the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs
                 mwrPortStatsThroughput 1.3.6.1.4.1.7262.4.5.9.3.1.1.13 integer32 read-only
The Ethernet data rate going out of the port. The data rate is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs.
         mwrEnetPerfPortStats32BitTable 1.3.6.1.4.1.7262.4.5.9.3.2 no-access
A table containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters.
             mwrEnetPerfPortStats32BitEntry 1.3.6.1.4.1.7262.4.5.9.3.2.1 no-access
A table entry containing 32-bit Ethernet statistics. This table is provided to satisfy snmp v1 users where they can't access 64-bit counters.
                 mwrPortStats32BitIndex 1.3.6.1.4.1.7262.4.5.9.3.2.1.1 integer no-access
A table index to ports carrying Ethernet packets. Enumeration: 'gi01': 1, 'gi02': 2, 'gi03': 3, 'gi04': 4, 'radio': 5.
                 mwrPortStatsInOctet32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.2 counter32 read-only
A 32-bit counter representing the incoming octets.
                 mwrPortStatsInGoodPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.3 counter32 read-only
A 32-bit counter representing the incoming good packets.
                 mwrPortStatsInErrPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.4 counter32 read-only
A 32-bit counter representing the incoming error packets.
                 mwrPortStatsInDiscardPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.5 counter32 read-only
A 32-bit counter representing the incoming discarded packets.
                 mwrPortStatsOutOctets32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.6 counter32 read-only
A 32-bit counter representing the outgoing octets.
                 mwrPortStatsOutGoodPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.7 counter32 read-only
A 32-bit counter representing the outgoing good packets.
                 mwrPortStatsOutErrPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.8 counter32 read-only
A 32-bit counter representing the outgoing error packets.
                 mwrPortStatsOutDiscardPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.2.1.9 counter32 read-only
A 32-bit counter representing the outgoing discarded packets.
         mwrEnetPerfRadioQStatsTable 1.3.6.1.4.1.7262.4.5.9.3.3 no-access
A table containing radio queue statistics.
             mwrEnetPerfRadioQStatsEntry 1.3.6.1.4.1.7262.4.5.9.3.3.1 no-access
A table entry containing radio queue statistics.
                 mwrRadioQStatsIndex 1.3.6.1.4.1.7262.4.5.9.3.3.1.1 queuetype no-access
A unique value for each of the 8 queues.
                 mwrRadioQStatsInGoodPkts 1.3.6.1.4.1.7262.4.5.9.3.3.1.2 counter64 read-only
The current count of packets in queues.
                 mwrRadioQStatsInDiscardPkts 1.3.6.1.4.1.7262.4.5.9.3.3.1.3 counter64 read-only
The current count of packets received in queues that were discarded due to queue overflow.
                 mwrRadioQStatsOutBwUtilization 1.3.6.1.4.1.7262.4.5.9.3.3.1.4 integer32 read-only
The ratio of egress data rate and user configured radio queue CIR.
                 mwrRadioQStatsInDataRate 1.3.6.1.4.1.7262.4.5.9.3.3.1.5 integer32 read-only
The ingress data rate of the radio queue.
                 mwrRadioQStatsThroughput 1.3.6.1.4.1.7262.4.5.9.3.3.1.6 integer32 read-only
The throughput of the radio queue.
         mwrEnetPerfRadioQStats32BitTable 1.3.6.1.4.1.7262.4.5.9.3.4 no-access
A table containing 32-bit counters for radio queue statistics.
             mwrEnetPerfRadioQStats32BitEntry 1.3.6.1.4.1.7262.4.5.9.3.4.1 no-access
A table entry containing 32-bit counters for radio queue statistics.
                 mwrRadioQStats32BitIndex 1.3.6.1.4.1.7262.4.5.9.3.4.1.1 queuetype no-access
A unique value for each of the 8 queues.
                 mwrRadioQStatsInGoodPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.4.1.2 counter32 read-only
A 32-bit counter representing the current count of packets in queues.
                 mwrRadioQStatsDiscardPkts32Bit 1.3.6.1.4.1.7262.4.5.9.3.4.1.3 counter32 read-only
A 32-bit counter representing the current count of packets received in queues that were discarded due to queue overflow .
     mwrEthernetNotifications 1.3.6.1.4.1.7262.4.5.9.4
         mwrDroppedPktsThreshold 1.3.6.1.4.1.7262.4.5.9.4.1
This notification is raised when the ethernet packet drops in an interface has exceeded user set limit.
         mwrRadioQDroppedPktsThreshold 1.3.6.1.4.1.7262.4.5.9.4.2
This notification is raised when Ethernet packet drops over radio traffic queue has exceeded the user configured limit. The mwrRadioQThresholdAlarmIndex varbind indicates specific queue number.
         mwrRadioQDepthThreshold 1.3.6.1.4.1.7262.4.5.9.4.3
This notification is raised when the data buffered in the specific radio traffic queue has exceeded the user set limit. The mwrRadioQThresholdAlarmIndex varbind indicates specific queue number.
         mwrOutBWUtilizationThreshold 1.3.6.1.4.1.7262.4.5.9.4.4
This notification is raised when the out bandwidth utilization of an interface has exceeded the user configured limit.
         mwrThroughputThreshold 1.3.6.1.4.1.7262.4.5.9.4.5
This notification is raised when the throughput of an interface has exceeded the user configured limit.
 mwrAcm 1.3.6.1.4.1.7262.4.5.10
       mwrAcmConfigurations 1.3.6.1.4.1.7262.4.5.10.1
           mwrAcmManualMode 1.3.6.1.4.1.7262.4.5.10.1.1 enabletype read-write
Enables or disables the Adaptive Coding Modulation (ACM) Manual Mode.
           mwrAcmState 1.3.6.1.4.1.7262.4.5.10.1.2 enabletype read-write
Enables or disables the Adaptive Code Modulation (ACM).
           mwrAcmWaitToRestore 1.3.6.1.4.1.7262.4.5.10.1.3 integer32 read-write
This object configures the ACM wait to restore duration time in seconds.
           mwrAcmModeTable 1.3.6.1.4.1.7262.4.5.10.1.4 no-access
A table containing available Adaptive Code Modulation (ACM) tx profiles.
               mwrAcmModeEntry 1.3.6.1.4.1.7262.4.5.10.1.4.1 no-access
A table entry containing available Adaptive Code Modulation (ACM) tx profiles.
                   mwrAcmModeIndex 1.3.6.1.4.1.7262.4.5.10.1.4.1.1 integer32 no-access
A unique value for each Adaptive Code Modulation (ACM) tx profile.
                   mwrAcmTxProfileName 1.3.6.1.4.1.7262.4.5.10.1.4.1.2 displaystring read-only
The Adaptive Code Modulation (ACM) tx profile name.
                   mwrAcmTxProfileRange 1.3.6.1.4.1.7262.4.5.10.1.4.1.3 integer read-write
Specifies the range for the Adaptive Code Modulation (ACM) TX Profile. Enumeration: 'max': 3, 'allowed': 2, 'min': 4, 'notAllowed': 1.
       mwrAcmStatus 1.3.6.1.4.1.7262.4.5.10.2
           mwrAcmStatusTable 1.3.6.1.4.1.7262.4.5.10.2.1 no-access
A table containing Adaptive Code Modulation (ACM) status.
               mwrAcmStatusEntry 1.3.6.1.4.1.7262.4.5.10.2.1.1 no-access
A table entry containing Adaptive Code Modulation (ACM) status.
                   mwrAcmStatusIndex 1.3.6.1.4.1.7262.4.5.10.2.1.1.1 radioinstancetype no-access
A unique value for each interface.
                   mwrAcmActualTxProfile 1.3.6.1.4.1.7262.4.5.10.2.1.1.2 displaystring read-only
A read-only string specifying the currently running ACM TX profile.
       mwrAcmDiagnostics 1.3.6.1.4.1.7262.4.5.10.3
           mwrAcmDiagTable 1.3.6.1.4.1.7262.4.5.10.3.1 no-access
A table containing ACM diagnostic settings.
               mwrAcmDiagEntry 1.3.6.1.4.1.7262.4.5.10.3.1.1 no-access
A table entry containing ACM diagnostic settings.
                   mwrAcmDiagIndex 1.3.6.1.4.1.7262.4.5.10.3.1.1.1 radioinstancetype no-access
A unique value for each radio channel if applicable.
                   mwrAcmDiagnose 1.3.6.1.4.1.7262.4.5.10.3.1.1.2 integer read-write
This service effecting object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased. Poll the mwrAcmDiagnosticResult object to determine the results. Enumeration: 'down': 2, 'up': 1.
                   mwrAcmDiagnosticResult 1.3.6.1.4.1.7262.4.5.10.3.1.1.3 displaystring read-only
The result from ACM Diagnostic is read from this object.
       mwrAcmNotifications 1.3.6.1.4.1.7262.4.5.10.4
           mwrAcmConfigMismatch 1.3.6.1.4.1.7262.4.5.10.4.1
This notification is raised when ACM configuration mismatch between the link partners.
           mwrAcmProfileLowered 1.3.6.1.4.1.7262.4.5.10.4.2
This notification is raised when system is executing ACM and working at a lower radio profile than the configured nominal radio profile.
           mwrAcmProfileChanged 1.3.6.1.4.1.7262.4.5.10.4.3
This notification is raised when system is executing in ACM and has changed the radio profile.
 mwrAtpc 1.3.6.1.4.1.7262.4.5.11
       mwrAtpcConfigurations 1.3.6.1.4.1.7262.4.5.11.1
           mwrAtpcConfigurationsTable 1.3.6.1.4.1.7262.4.5.11.1.1 no-access
Table containing ATPC configurations.
               mwrAtpcConfigurationsEntry 1.3.6.1.4.1.7262.4.5.11.1.1.1 no-access
Table entry containing ATPC configurations.
                   mwrAtpcConfigIndex 1.3.6.1.4.1.7262.4.5.11.1.1.1.1 radioinstancetype no-access
A unique value for each of the radio channel instance.
                   mwrAtpcState 1.3.6.1.4.1.7262.4.5.11.1.1.1.2 enabletype read-write
Indicates whether the Adaptive Transmit Power Control (ATPC) feature is enabled.
                   mwrAtpcCoordinatedPower 1.3.6.1.4.1.7262.4.5.11.1.1.1.3 integer32 read-write
This object is the value at which the system will transmit if the ATPC and the coordinated power are enabled. This is only if the system is transmitting the maximum power for 5 minutes. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dB.
                   mwrAtpcCoordinatedPowerEnable 1.3.6.1.4.1.7262.4.5.11.1.1.1.4 enabletype read-write
Indicates whether Adaptive Transmit Power Control (ATPC) coordinated power option is enabled.
                   mwrAtpcMinTxPower 1.3.6.1.4.1.7262.4.5.11.1.1.1.5 integer32 read-write
Sets the minimum ATPC transmit power in dB x 10.
                   mwrAtpcMaxTxPower 1.3.6.1.4.1.7262.4.5.11.1.1.1.6 integer32 read-write
Sets the maximum ATPC transmit power in dB x 10. When ATPC is enabled, transmit power range will be between ATPC min. and ATPC max. power.
                   mwrAtpcRslTarget 1.3.6.1.4.1.7262.4.5.11.1.1.1.7 integer32 read-write
This object configures Received Signal Level that should be maintained by the link by adjusting the transmit power when ATPC is enabled.
                   mwrAtpcRslTargetUseDefault 1.3.6.1.4.1.7262.4.5.11.1.1.1.8 enabletype read-write
When this object is enabled the default RSL target will be used instead of the configured mwrAtpcRslTarget. The mwrAtpcDefaultRslTarget displays the default value.
       mwrAtpcStatus 1.3.6.1.4.1.7262.4.5.11.2
           mwrAtpcStatusTable 1.3.6.1.4.1.7262.4.5.11.2.1 no-access
A table containing ATPC status.
               mwrAtpcStatusEntry 1.3.6.1.4.1.7262.4.5.11.2.1.1 no-access
A table entry containing ATPC status.
                   mwrAtpcStatusIndex 1.3.6.1.4.1.7262.4.5.11.2.1.1.1 radioinstancetype no-access
A unique value for each of the radio instance.
                   mwrAtpcRunningStatus 1.3.6.1.4.1.7262.4.5.11.2.1.1.2 integer read-only
Indicates the actual condition of ATPC: - disabled: Configuration is set to off. - disabledAuto: Feature was automatically disabled and is transmitting at coordinated power. - running: Feature is running normally. - runningToggling: Feature is toggling between maximum and minimum power to recover from a loss of mod sync. - suspended: Feature was suspended. - suspendedLostComm: Feature is suspended because communication is lost with peer ATPC. - suspendedRadioDown: Feature is suspended because the radio is down. - suspendedRadioMuted: Feature is suspended because the radio is muted. - suspendedRadioLoopback: Feature is suspended because the radio is in loopback mode. Enumeration: 'suspendedRadioMuted': 8, 'suspendedRadioLoopback': 9, 'disabled': 1, 'running': 3, 'runningToggling': 4, 'suspended': 5, 'disabledAuto': 2, 'suspendedRadioDown': 7, 'suspendedLostComm': 6.
                   mwrAtpcDefaultRslTarget 1.3.6.1.4.1.7262.4.5.11.2.1.1.3 integer32 read-only
This object is the default value of the Received Signal Level target when ATPC is enabled.
                   mwrAtpcActualMinTxPower 1.3.6.1.4.1.7262.4.5.11.2.1.1.4 integer32 read-only
This object indicates the running configuration for ATPC min tx power.
                   mwrAtpcActualMaxTxPower 1.3.6.1.4.1.7262.4.5.11.2.1.1.5 integer32 read-only
This object indicates the running configuration for ATPC max tx power.
                   mwrAtpcActualCoordinatedPower 1.3.6.1.4.1.7262.4.5.11.2.1.1.6 integer32 read-only
This value is the running configuration of the coordinated power. The value is multiplied by 10. e.g. A display of 133 is actually 13.3 dB.
                   mwrAtpcPeerRslTarget 1.3.6.1.4.1.7262.4.5.11.2.1.1.7 integer32 read-only
This object is the peer Received Signal Level target when ATPC is enabled.
                   mwrAtpcMinRslTarget 1.3.6.1.4.1.7262.4.5.11.2.1.1.8 integer32 read-only
Represents the minimum RSL target value.
                   mwrAtpcMaxRslTarget 1.3.6.1.4.1.7262.4.5.11.2.1.1.9 integer32 read-only
Represents the maximum RSL target value.
                   mwrAtpcPeerRsl 1.3.6.1.4.1.7262.4.5.11.2.1.1.10 integer32 read-only
This object represents the peer actual RSL value. Divide the value by 10 to get the actual RSL value. Once this number is divided by 10 the units are dB. For example -352 is actually -35.2dB
       mwrAtpcNotifications 1.3.6.1.4.1.7262.4.5.11.3
           mwrAtpcConfigMismatch 1.3.6.1.4.1.7262.4.5.11.3.1
This notification is raised when ATPC configuration mismatch has occurred between link partners.
           mwrAtpcAutoDisabled 1.3.6.1.4.1.7262.4.5.11.3.2
This notification is raised when ATPC is automatically disabled due to coordinated power condition. When this notification is raised the radio will be transmitting at coordinated power. The mwrAtpcStatusIndex varbind indicates the radio instance.
 mwrRadio 1.3.6.1.4.1.7262.4.5.12
 mwrCompression 1.3.6.1.4.1.7262.4.5.13
       mwrCompressionConfigurations 1.3.6.1.4.1.7262.4.5.13.1
           mwrBacRecordAvgPeriod 1.3.6.1.4.1.7262.4.5.13.1.1 integer32 read-write
Configures the average period used for computing the running average BAC gain and uncompressed ratio. Default average period is set to 10 seconds.
           mwrBacTable 1.3.6.1.4.1.7262.4.5.13.1.2 no-access
Table containing Bandwidth Acceleration entries.
               mwrBacEntry 1.3.6.1.4.1.7262.4.5.13.1.2.1 no-access
Contains Bandwidth Acceleration entries.
                   mwrBacQIndex 1.3.6.1.4.1.7262.4.5.13.1.2.1.1 queuetype no-access
A unique value for each of the 8 radio egress Queues.
                   mwrBacQEnable 1.3.6.1.4.1.7262.4.5.13.1.2.1.2 enabletype read-write
Configure queue compression state to disable/enable.
                   mwrBacQBlockSize 1.3.6.1.4.1.7262.4.5.13.1.2.1.3 integer32 read-write
Configure queue compression block size (256...8000). Block size has to be in increments of 64 bytes. Otherwise it will be rounded off to nearest 64 bytes. Valid block sizes are <256 512 1024 4032 8000>
                   mwrBacRecordLogging 1.3.6.1.4.1.7262.4.5.13.1.2.1.4 enabletype read-write
Enables/disables logging of BAC related statistics like Maximum BAC gain and Maximum uncompressed ratio on a per queue basis to syslog and flashlog.
           mwrHcQTable 1.3.6.1.4.1.7262.4.5.13.1.3 no-access
A table containing Header Compression settings for each queue, the configuration corresponds to the egress QoS of radio port.
               mwrHcQEntry 1.3.6.1.4.1.7262.4.5.13.1.3.1 no-access
A table entry containing Header Compression settings for each queue.
                   mwrHcQIndex 1.3.6.1.4.1.7262.4.5.13.1.3.1.1 queuetype no-access
Specifies Header Compression queue index for each radio queue.
                   mwrHcQ1 1.3.6.1.4.1.7262.4.5.13.1.3.1.2 enabletype read-write
Enables or disables the Header Compression on queue 1.
                   mwrHcQ2 1.3.6.1.4.1.7262.4.5.13.1.3.1.3 enabletype read-write
Enables or disables the Header Compression on queue 2.
                   mwrHcQ3 1.3.6.1.4.1.7262.4.5.13.1.3.1.4 enabletype read-write
Enables or disables the Header Compression on queue 3.
                   mwrHcQ4 1.3.6.1.4.1.7262.4.5.13.1.3.1.5 enabletype read-write
Enables or disables the Header Compression on queue 4.
                   mwrHcQ5 1.3.6.1.4.1.7262.4.5.13.1.3.1.6 enabletype read-write
Enables or disables the Header Compression on queue 5.
                   mwrHcQ6 1.3.6.1.4.1.7262.4.5.13.1.3.1.7 enabletype read-write
Enables or disables the Header Compression on queue 6.
                   mwrHcQ7 1.3.6.1.4.1.7262.4.5.13.1.3.1.8 enabletype read-write
Enables or disables the Header Compression on queue 7.
                   mwrHcQ8 1.3.6.1.4.1.7262.4.5.13.1.3.1.9 enabletype read-write
Enables or disables the Header Compression on queue 8.
                   mwrHcQRowStatus 1.3.6.1.4.1.7262.4.5.13.1.3.1.10 rowstatus read-write
The Header Compression table Row Status. This object is used to apply Header Compression settings for all queues simultaneously.
       mwrCompressionStatus 1.3.6.1.4.1.7262.4.5.13.2
           mwrBacStatusTable 1.3.6.1.4.1.7262.4.5.13.2.1 no-access
Table containing Bandwidth Acceleration status entries.
               mwrBacStatusEntry 1.3.6.1.4.1.7262.4.5.13.2.1.1 no-access
Contains Bandwidth Acceleration status entries.
                   mwrBacStatusQIndex 1.3.6.1.4.1.7262.4.5.13.2.1.1.1 queuetype no-access
A unique value for each of the 8 Queues.
                   mwrBacUncompressedRatio 1.3.6.1.4.1.7262.4.5.13.2.1.1.2 displaystring read-only
Running average Uncompressed ratio is calculated by collecting n samples of bytes uncompressed and bytes in to queue over specified average period in percentage.
                   mwrBacGain 1.3.6.1.4.1.7262.4.5.13.2.1.1.3 displaystring read-only
The Running Average BAC gain is the sum of all bytes getting into the compressor divided by the sum of all compressed and uncompressed bytes calculated over an average period.
       mwrCompressionNotifications 1.3.6.1.4.1.7262.4.5.13.3
 mwrEvents 1.3.6.1.4.1.7262.4.5.14
       mwrEventsConfigurations 1.3.6.1.4.1.7262.4.5.14.1
           mwrEventConfigTable 1.3.6.1.4.1.7262.4.5.14.1.1 no-access
A table of alarm configuration
               mwrEventConfigEntry 1.3.6.1.4.1.7262.4.5.14.1.1.1 no-access
An entry of alarm configuration
                   mwrEventConfigIndex 1.3.6.1.4.1.7262.4.5.14.1.1.1.1 unsigned32 no-access
A unique value for each alarm.
                   mwrEventInstanceIndex 1.3.6.1.4.1.7262.4.5.14.1.1.1.2 unsigned32 read-only
A unique value for each instance of an alarm.
                   mwrEventConfigSeverity 1.3.6.1.4.1.7262.4.5.14.1.1.1.3 integer read-write
The severity of the alarm as minor, major or critical. Enumeration: 'clear': 0, 'warning': 1, 'critical': 4, 'major': 3, 'minor': 2.
                   mwrEventName 1.3.6.1.4.1.7262.4.5.14.1.1.1.4 displaystring read-only
Represents the event name.
                   mwrAlarmConfigState 1.3.6.1.4.1.7262.4.5.14.1.1.1.5 enabletype read-write
The state of the alarm which can be either enabled or disabled.
                   mwrTrapConfigState 1.3.6.1.4.1.7262.4.5.14.1.1.1.6 enabletype read-write
The state of the trap which can be either enabled or disabled.
                   mwrLogEventState 1.3.6.1.4.1.7262.4.5.14.1.1.1.7 enabletype read-write
This object is used to enable or disable logging the events.
 mwrLogs 1.3.6.1.4.1.7262.4.5.15
       mwrLogsConfigurations 1.3.6.1.4.1.7262.4.5.15.1
           mwrEventLogEnable 1.3.6.1.4.1.7262.4.5.15.1.1 enabletype read-write
Indicates whether event log is enabled.
           mwrPerfmLogEnable 1.3.6.1.4.1.7262.4.5.15.1.2 enabletype read-write
Indicates whether performance log is enabled.
           mwrPerfmLogInterval 1.3.6.1.4.1.7262.4.5.15.1.3 displaystring read-write
Performance statistics are logged periodically by this interval. The interval can be up to 00:15:00 (15 minutes) and as short as 00:00:1 (1 seconds).
           mwrSysLogServerTable 1.3.6.1.4.1.7262.4.5.15.1.4 no-access
The syslog server table.
               mwrSysLogServerEntry 1.3.6.1.4.1.7262.4.5.15.1.4.1 no-access
The syslog server table entry.
                   mwrSysLogServerIndex 1.3.6.1.4.1.7262.4.5.15.1.4.1.1 integer32 no-access
The syslog server table index.
                   mwrSysLogEnable 1.3.6.1.4.1.7262.4.5.15.1.4.1.2 enabletype read-write
Indicates whether sys log is enabled.
                   mwrSysLogHostDomain 1.3.6.1.4.1.7262.4.5.15.1.4.1.3 inetaddresstype read-write
Indicates sys log host inet address type. Valid types are ipv4 or ipv6.
                   mwrSysLogHostAddress 1.3.6.1.4.1.7262.4.5.15.1.4.1.4 inetaddress read-write
Indicates sys log host inet address octet string.
 mwrPM 1.3.6.1.4.1.7262.4.5.16
       mwrPMConfigurations 1.3.6.1.4.1.7262.4.5.16.1
           mwrPmRspiThresholdTable 1.3.6.1.4.1.7262.4.5.16.1.1 no-access
Performance Monitoring table for Radio Synchronous Physical Interface thresholds.
               mwrPmRspiThresholdEntry 1.3.6.1.4.1.7262.4.5.16.1.1.1 no-access
Contains entries for Radio Synchronous Physical Interface thresholds.
                   mwrPmRspiThrIndex 1.3.6.1.4.1.7262.4.5.16.1.1.1.1 radioinstancetype no-access
Index to PM RSPI Threshold table.
                   mwrPmRLT1 1.3.6.1.4.1.7262.4.5.16.1.1.1.2 integer32 read-write
Receive Level Threshold 1, represents the value of the first received power level threshold.
                   mwrPmRLT2 1.3.6.1.4.1.7262.4.5.16.1.1.1.3 integer32 read-write
Receive Level Threshold 2, represents the value of the second received power level threshold.
                   mwrPmRLT3 1.3.6.1.4.1.7262.4.5.16.1.1.1.4 integer32 read-write
Receive Level Threshold 3, represents the value of the third received power level threshold.
                   mwrPmRLT4 1.3.6.1.4.1.7262.4.5.16.1.1.1.5 integer32 read-write
Receive Level Threshold 4, represents the value of the fourth received power level threshold.
                   mwrPmTLT1 1.3.6.1.4.1.7262.4.5.16.1.1.1.6 integer32 read-write
Transmit Level Threshold 1, represents the value of the first transmitted power level threshold.
                   mwrPmTLT2 1.3.6.1.4.1.7262.4.5.16.1.1.1.7 integer32 read-write
Transmit Level Threshold 2, represents the value of the second transmitted power level threshold.
                   mwrPmRspiThrRowStatus 1.3.6.1.4.1.7262.4.5.16.1.1.1.8 rowstatus read-write
This object is used for applying all RSPI thresholds simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active.
           mwrPmBwThresholdTable 1.3.6.1.4.1.7262.4.5.16.1.2 no-access
Performance monitoring out bandwidth utilization thresholds table.
               mwrPmBwThresholdEntry 1.3.6.1.4.1.7262.4.5.16.1.2.1 no-access
Contains entries for performance monitoring out bandwidth utilization thresholds.
                   mwrPmBWThrIndex 1.3.6.1.4.1.7262.4.5.16.1.2.1.1 integer32 no-access
Index to PM out BW Threshold table. Index 1 represents the radio port.
                   mwrPmBWT1 1.3.6.1.4.1.7262.4.5.16.1.2.1.2 integer32 read-write
The performance monitoring out BW utilization threshold 1.
                   mwrPmBWT2 1.3.6.1.4.1.7262.4.5.16.1.2.1.3 integer32 read-write
The performance monitoring out BW utilization threshold 2.
                   mwrPmBWT3 1.3.6.1.4.1.7262.4.5.16.1.2.1.4 integer32 read-write
The performance monitoring out BW utilization threshold 3.
                   mwrPmBWT4 1.3.6.1.4.1.7262.4.5.16.1.2.1.5 integer32 read-write
The performance monitoring out BW utilization threshold 4.
                   mwrPmBWT5 1.3.6.1.4.1.7262.4.5.16.1.2.1.6 integer32 read-write
The performance monitoring out BW utilization threshold 5.
                   mwrPmBWT6 1.3.6.1.4.1.7262.4.5.16.1.2.1.7 integer32 read-write
The performance monitoring out BW utilization threshold 6.
                   mwrPmBWT7 1.3.6.1.4.1.7262.4.5.16.1.2.1.8 integer32 read-write
The performance monitoring out BW utilization threshold 7.
                   mwrPmBWT8 1.3.6.1.4.1.7262.4.5.16.1.2.1.9 integer32 read-write
The performance monitoring out BW utilization threshold 8.
                   mwrPmBWT9 1.3.6.1.4.1.7262.4.5.16.1.2.1.10 integer32 read-write
The performance monitoring out BW utilization threshold 9.
                   mwrPmBWT10 1.3.6.1.4.1.7262.4.5.16.1.2.1.11 integer32 read-write
The performance monitoring out BW utilization threshold 10.
                   mwrPmBWTRowStatus 1.3.6.1.4.1.7262.4.5.16.1.2.1.12 rowstatus read-write
This object is used for applying all PM bandwidth threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active.
           mwrPmTpThresholdTable 1.3.6.1.4.1.7262.4.5.16.1.3 no-access
Performance monitoring throughput thresholds table.
               mwrPmTpThresholdEntry 1.3.6.1.4.1.7262.4.5.16.1.3.1 no-access
Contains entries for performance monitoring throughput thresholds.
                   mwrPmTPThrIndex 1.3.6.1.4.1.7262.4.5.16.1.3.1.1 integer32 no-access
Index to PM throughput Threshold table. Index 1 represents the radio port.
                   mwrPmTPT1 1.3.6.1.4.1.7262.4.5.16.1.3.1.2 integer32 read-write
The performance monitoring throughput threshold 1.
                   mwrPmTPT2 1.3.6.1.4.1.7262.4.5.16.1.3.1.3 integer32 read-write
The performance monitoring throughput threshold 2.
                   mwrPmTPT3 1.3.6.1.4.1.7262.4.5.16.1.3.1.4 integer32 read-write
The performance monitoring throughput threshold 3.
                   mwrPmTPT4 1.3.6.1.4.1.7262.4.5.16.1.3.1.5 integer32 read-write
The performance monitoring throughput threshold 4.
                   mwrPmTPT5 1.3.6.1.4.1.7262.4.5.16.1.3.1.6 integer32 read-write
The performance monitoring throughput threshold 5.
                   mwrPmTPT6 1.3.6.1.4.1.7262.4.5.16.1.3.1.7 integer32 read-write
The performance monitoring throughput threshold 6.
                   mwrPmTPT7 1.3.6.1.4.1.7262.4.5.16.1.3.1.8 integer32 read-write
The performance monitoring throughput threshold 7.
                   mwrPmTPT8 1.3.6.1.4.1.7262.4.5.16.1.3.1.9 integer32 read-write
The performance monitoring throughput threshold 8.
                   mwrPmTPT9 1.3.6.1.4.1.7262.4.5.16.1.3.1.10 integer32 read-write
The performance monitoring throughput threshold 9.
                   mwrPmTPT10 1.3.6.1.4.1.7262.4.5.16.1.3.1.11 integer32 read-write
The performance monitoring throughput threshold 10.
                   mwrPmTPTRowStatus 1.3.6.1.4.1.7262.4.5.16.1.3.1.12 rowstatus read-write
This object is used for applying all PM throughput threshold settings simultaneously. Set RowStatus to NotInService, make changes to all or some threshold values and then change RowStatus back to Active.
           mwrPmAdvThresholdTable 1.3.6.1.4.1.7262.4.5.16.1.4 no-access
The advanced performance monitoring thresholds table.
               mwrPmAdvThresholdEntry 1.3.6.1.4.1.7262.4.5.16.1.4.1 no-access
The advanced performance monitoring thresholds entries.
                   mwrPmAdvThrIndex 1.3.6.1.4.1.7262.4.5.16.1.4.1.1 integer32 no-access
The advanced performance monitoring thresholds table index. Index 1 represents the radio port.
                   mwrPmAdvTxHitsT1 1.3.6.1.4.1.7262.4.5.16.1.4.1.2 integer32 read-write
The advanced performance monitoring Tx hits threshold 1.
                   mwrPmAdvRxHitsT1 1.3.6.1.4.1.7262.4.5.16.1.4.1.3 integer32 read-write
The advanced performance monitoring Rx hits threshold 1.
                   mwrPmAdvRowStatus 1.3.6.1.4.1.7262.4.5.16.1.4.1.4 rowstatus read-write
This object is used for applying all PM advanced threshold settings simultaneously. Set RowStatus to NotInService, make changes to all threshold values and then change back RowStatus to Active.
       mwrPMStatus 1.3.6.1.4.1.7262.4.5.16.2
           mwrPmRspiTable 1.3.6.1.4.1.7262.4.5.16.2.1 no-access
Performance Monitoring table for Radio Synchronous Physical Interface.
               mwrPmRspiEntry 1.3.6.1.4.1.7262.4.5.16.2.1.1 no-access
Contains information for Radio Synchronous Physical Interface. The table is indexed by the granularity period and by the interval number. 22 rows are always presents, 20 are the historical measurements for 16 intervals in the quarter granularity and 4 intervals in the 24 hours granularity period. 2 rows represent the current measures.
                   mwrPmRspiStatusIndex 1.3.6.1.4.1.7262.4.5.16.2.1.1.1 radioinstancetype no-access
A unique value for each of the radio instance.
                   mwrPmRspiInterval 1.3.6.1.4.1.7262.4.5.16.2.1.1.2 pmintervaltype no-access
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
                   mwrPmRspiIntervalID 1.3.6.1.4.1.7262.4.5.16.2.1.1.3 integer32 no-access
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
                   mwrPmRspiMeasSuspect 1.3.6.1.4.1.7262.4.5.16.2.1.1.4 truthvalue read-only
Any problem that invalidates the measurement.
                   mwrPmRspiMeasIntervalStatus 1.3.6.1.4.1.7262.4.5.16.2.1.1.5 integer read-only
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. Enumeration: 'valid': 2, 'invalid': 1.
                   mwrPmRspiMeasTimeLength 1.3.6.1.4.1.7262.4.5.16.2.1.1.6 integer32 read-only
The interval duration in seconds.
                   mwrPmRspiMeasTLTMMin 1.3.6.1.4.1.7262.4.5.16.2.1.1.7 integer32 read-only
The transmitted power level tide mark low value.
                   mwrPmRspiMeasTLTMMax 1.3.6.1.4.1.7262.4.5.16.2.1.1.8 integer32 read-only
The transmitted power level tide mark high value.
                   mwrPmRspiMeasTLTS1 1.3.6.1.4.1.7262.4.5.16.2.1.1.9 integer32 read-only
The number of seconds above the first transmitted power level threshold.
                   mwrPmRspiMeasTLTS2 1.3.6.1.4.1.7262.4.5.16.2.1.1.10 integer32 read-only
The number of seconds above the second transmitted power level threshold.
                   mwrPmRspiMeasRLTMMin 1.3.6.1.4.1.7262.4.5.16.2.1.1.11 integer32 read-only
The received power level tide mark low value.
                   mwrPmRspiMeasRLTMMax 1.3.6.1.4.1.7262.4.5.16.2.1.1.12 integer32 read-only
The received power level tide mark high value.
                   mwrPmRspiMeasRLTS1 1.3.6.1.4.1.7262.4.5.16.2.1.1.13 integer32 read-only
The number of seconds below the first received power level threshold.
                   mwrPmRspiMeasRLTS2 1.3.6.1.4.1.7262.4.5.16.2.1.1.14 integer32 read-only
The number of seconds below the second received power level threshold.
                   mwrPmRspiMeasRLTS3 1.3.6.1.4.1.7262.4.5.16.2.1.1.15 integer32 read-only
The number of seconds below the third received power level threshold.
                   mwrPmRspiMeasRLTS4 1.3.6.1.4.1.7262.4.5.16.2.1.1.16 integer32 read-only
The number of seconds below the fourth received power level threshold.
           mwrPmBWTable 1.3.6.1.4.1.7262.4.5.16.2.2 no-access
Table containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization.
               mwrPmBWEntry 1.3.6.1.4.1.7262.4.5.16.2.2.1 no-access
Table entries containing performance monitoring measurements in 15 min and 24 hrs intervals for out BW utilization.
                   mwrPmBWStatusIndex 1.3.6.1.4.1.7262.4.5.16.2.2.1.1 integer32 no-access
The performance monitoring out BW utilization measurements table index. Index 1 represents the radio port.
                   mwrPmBWInterval 1.3.6.1.4.1.7262.4.5.16.2.2.1.2 pmintervaltype no-access
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
                   mwrPmBWIntervalID 1.3.6.1.4.1.7262.4.5.16.2.2.1.3 integer32 no-access
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
                   mwrPmBWMeasSuspect 1.3.6.1.4.1.7262.4.5.16.2.2.1.4 truthvalue read-only
Any problem that invalidates the measurement.
                   mwrPmBWMeasIntervalStatus 1.3.6.1.4.1.7262.4.5.16.2.2.1.5 integer read-only
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. Enumeration: 'valid': 2, 'invalid': 1.
                   mwrPmBWMeasTimeLength 1.3.6.1.4.1.7262.4.5.16.2.2.1.6 integer32 read-only
The interval duration in seconds.
                   mwrPmMeasBWTS1 1.3.6.1.4.1.7262.4.5.16.2.2.1.7 integer32 read-only
The number of seconds above the first BW utilization threshold.
                   mwrPmMeasBWTS2 1.3.6.1.4.1.7262.4.5.16.2.2.1.8 integer32 read-only
The number of seconds above the second BW utilization threshold.
                   mwrPmMeasBWTS3 1.3.6.1.4.1.7262.4.5.16.2.2.1.9 integer32 read-only
The number of seconds above the third BW utilization threshold.
                   mwrPmMeasBWTS4 1.3.6.1.4.1.7262.4.5.16.2.2.1.10 integer32 read-only
The number of seconds above the fourth BW utilization threshold.
                   mwrPmMeasBWTS5 1.3.6.1.4.1.7262.4.5.16.2.2.1.11 integer32 read-only
The number of seconds above the fifth BW utilization threshold.
                   mwrPmMeasBWTS6 1.3.6.1.4.1.7262.4.5.16.2.2.1.12 integer32 read-only
The number of seconds above the sixth BW utilization threshold.
                   mwrPmMeasBWTS7 1.3.6.1.4.1.7262.4.5.16.2.2.1.13 integer32 read-only
The number of seconds above the seventh BW utilization threshold.
                   mwrPmMeasBWTS8 1.3.6.1.4.1.7262.4.5.16.2.2.1.14 integer32 read-only
The number of seconds above the eighth BW utilization threshold.
                   mwrPmMeasBWTS9 1.3.6.1.4.1.7262.4.5.16.2.2.1.15 integer32 read-only
The number of seconds above the ninth BW utilization threshold.
                   mwrPmMeasBWTS10 1.3.6.1.4.1.7262.4.5.16.2.2.1.16 integer32 read-only
The number of seconds above the tenth BW utilization threshold.
           mwrPmTPTable 1.3.6.1.4.1.7262.4.5.16.2.3 no-access
Table containing performance monitoring measurements in 15 min and 24 hrs intervals for throughput.
               mwrPmTPEntry 1.3.6.1.4.1.7262.4.5.16.2.3.1 no-access
Table entry containing performance monitoring throughput measurements in 15 min and 24 hrs intervals.
                   mwrPmTPStatusIndex 1.3.6.1.4.1.7262.4.5.16.2.3.1.1 integer32 no-access
The performance monitoring throughput measurements table index. Index 1 represents the radio port.
                   mwrPmTPInterval 1.3.6.1.4.1.7262.4.5.16.2.3.1.2 pmintervaltype no-access
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
                   mwrPmTPIntervalID 1.3.6.1.4.1.7262.4.5.16.2.3.1.3 integer32 no-access
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
                   mwrPmTPMeasSuspect 1.3.6.1.4.1.7262.4.5.16.2.3.1.4 truthvalue read-only
Any problem that invalidates the measurement.
                   mwrPmTPMeasIntervalStatus 1.3.6.1.4.1.7262.4.5.16.2.3.1.5 integer read-only
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. Enumeration: 'valid': 2, 'invalid': 1.
                   mwrPmTPMeasTimeLength 1.3.6.1.4.1.7262.4.5.16.2.3.1.6 integer32 read-only
The interval duration in seconds.
                   mwrPmMeasTPTS1 1.3.6.1.4.1.7262.4.5.16.2.3.1.7 integer32 read-only
The number of seconds above the first throughput threshold.
                   mwrPmMeasTPTS2 1.3.6.1.4.1.7262.4.5.16.2.3.1.8 integer32 read-only
The number of seconds above the second throughput threshold.
                   mwrPmMeasTPTS3 1.3.6.1.4.1.7262.4.5.16.2.3.1.9 integer32 read-only
The number of seconds above the third throughput threshold.
                   mwrPmMeasTPTS4 1.3.6.1.4.1.7262.4.5.16.2.3.1.10 integer32 read-only
The number of seconds above the fourth throughput threshold.
                   mwrPmMeasTPTS5 1.3.6.1.4.1.7262.4.5.16.2.3.1.11 integer32 read-only
The number of seconds above the fifth throughput threshold.
                   mwrPmMeasTPTS6 1.3.6.1.4.1.7262.4.5.16.2.3.1.12 integer32 read-only
The number of seconds above the sixth throughput threshold.
                   mwrPmMeasTPTS7 1.3.6.1.4.1.7262.4.5.16.2.3.1.13 integer32 read-only
The number of seconds above the seventh throughput threshold.
                   mwrPmMeasTPTS8 1.3.6.1.4.1.7262.4.5.16.2.3.1.14 integer32 read-only
The number of seconds above the eighth throughput threshold.
                   mwrPmMeasTPTS9 1.3.6.1.4.1.7262.4.5.16.2.3.1.15 integer32 read-only
The number of seconds above the ninth throughput threshold.
                   mwrPmMeasTPTS10 1.3.6.1.4.1.7262.4.5.16.2.3.1.16 integer32 read-only
The number of seconds above the tenth throughput threshold.
           mwrPmAdvTable 1.3.6.1.4.1.7262.4.5.16.2.4 no-access
The advanced performance monitoring measurements table.
               mwrPmAdvEntry 1.3.6.1.4.1.7262.4.5.16.2.4.1 no-access
The advanced performance monitoring measurements table entries.
                   mwrPmAdvStatusIndex 1.3.6.1.4.1.7262.4.5.16.2.4.1.1 integer32 no-access
The advanced performance monitoring measurements table index. Index 1 represents the radio port.
                   mwrPmAdvInterval 1.3.6.1.4.1.7262.4.5.16.2.4.1.2 pmintervaltype no-access
The interval period of the row. Quarter means the 15 minutes interval and day means the 24 hours interval.
                   mwrPmAdvIntervalID 1.3.6.1.4.1.7262.4.5.16.2.4.1.3 integer32 no-access
The interval identifier of the row, from 1 (last quarter) to 16 (oldest quarter) for the 15-minute and from 1 (yesterday) to 4 (4 days ago) for the 24-hour. Value 0 can be used to retrieve current measurements, according to the requested granularity.
                   mwrPmAdvMeasSuspect 1.3.6.1.4.1.7262.4.5.16.2.4.1.4 truthvalue read-only
Any problem that invalidates the measurement.
                   mwrPmAdvMeasIntervalStatus 1.3.6.1.4.1.7262.4.5.16.2.4.1.5 integer read-only
An indication if the interval is a valid measurement. When the system comes up, all the previous intervals are invalid. Enumeration: 'valid': 2, 'invalid': 1.
                   mwrPmAdvMeasTimeLength 1.3.6.1.4.1.7262.4.5.16.2.4.1.6 integer32 read-only
The interval duration in seconds.
                   mwrPmAdvTxCapPeak 1.3.6.1.4.1.7262.4.5.16.2.4.1.7 integer32 read-only
The number of bits per second peak transmitted capacity during the time interval.
                   mwrPmAdvTxCapRatio 1.3.6.1.4.1.7262.4.5.16.2.4.1.8 integer32 read-only
The percentage of peak transmitted capacity referred to the total allowed capacity during the time interval.
                   mwrPmAdvTxCapAvg 1.3.6.1.4.1.7262.4.5.16.2.4.1.9 integer32 read-only
The number of bits per second average transmitted capacity during the time interval.
                   mwrPmAdvTxCapAvgRatio 1.3.6.1.4.1.7262.4.5.16.2.4.1.10 integer32 read-only
The percentage of average transmitted capacity during the time interval.
                   mwrPmAdvTxCapHits 1.3.6.1.4.1.7262.4.5.16.2.4.1.11 integer32 read-only
The number of seconds where the transmitted capacity has overcome a configurable threshold during the time interval.
                   mwrPmAdvRxCapPeak 1.3.6.1.4.1.7262.4.5.16.2.4.1.12 integer32 read-only
The number of bits per second peak received capacity during the time interval.
                   mwrPmAdvRxCapRatio 1.3.6.1.4.1.7262.4.5.16.2.4.1.13 integer32 read-only
The percentage of peak received capacity referred to the total allowed capacity during the time interval.
                   mwrPmAdvRxCapAvg 1.3.6.1.4.1.7262.4.5.16.2.4.1.14 integer32 read-only
The number of bits per second average received capacity during the time interval.
                   mwrPmAdvRxCapHits 1.3.6.1.4.1.7262.4.5.16.2.4.1.15 integer32 read-only
The number of seconds where the received capacity has overcome a configurable threshold during the time interval.
       mwrPMNotifications 1.3.6.1.4.1.7262.4.5.16.3
 mwrUserMgmt 1.3.6.1.4.1.7262.4.5.17
       mwrUserConfiguration 1.3.6.1.4.1.7262.4.5.17.1
       mwrUserStatus 1.3.6.1.4.1.7262.4.5.17.2
           mwrUserSessionTable 1.3.6.1.4.1.7262.4.5.17.2.1 no-access
A table of user sessions
               mwrUserSessionEntry 1.3.6.1.4.1.7262.4.5.17.2.1.1 no-access
User session entry
                   mwrUserIndex 1.3.6.1.4.1.7262.4.5.17.2.1.1.1 integer no-access
A unique value for each user. Enumeration: 'user6': 6, 'user7': 7, 'user4': 4, 'user5': 5, 'user2': 2, 'user3': 3, 'user1': 1, 'user8': 8, 'user9': 9, 'user10': 10, 'user11': 11, 'user12': 12, 'user13': 13, 'user14': 14, 'user15': 15, 'user16': 16, 'user17': 17, 'user18': 18, 'user19': 19, 'user20': 20.
                   mwrUserName 1.3.6.1.4.1.7262.4.5.17.2.1.1.2 displaystring read-only
The username of a management session using Telnet or HTTP. The session state variable must be checked to determine if the management session is currently in progress.
                   mwrUserConnectionType 1.3.6.1.4.1.7262.4.5.17.2.1.1.3 displaystring read-only
Either telnet, ssh, http or https. Ethernet connection may be through any physical port(s) dedicated to management of the equipment.
                   mwrUserConnectionState 1.3.6.1.4.1.7262.4.5.17.2.1.1.4 integer read-only
The state of the session. The session is inProgress if the user is currently logged into the system. The session is terminated if the user has logged out of the system. Enumeration: 'informationNotAvailable': 1, 'sessionInProgress': 3, 'sessionTerminated': 2.
       mwrUserNotifications 1.3.6.1.4.1.7262.4.5.17.3
           mwrUserSession 1.3.6.1.4.1.7262.4.5.17.3.1
This notification is raised when a change in the state of user access is recognized, a new user has logged in or an existing user has logged out.
           mwrUserLoginFailed 1.3.6.1.4.1.7262.4.5.17.3.2
This notification is raised when a user has failed to login.
           mwrUserAccountChanged 1.3.6.1.4.1.7262.4.5.17.3.3
This notification is raised when a change in user account information in the system is detected.
           mwrUserPasswordChanged 1.3.6.1.4.1.7262.4.5.17.3.4
This notification is raised when a user password has changed.
 mwrModIdentity 1.3.6.1.4.1.7262.4.5.1000
This specifies the contact information and the revision tracking information for the MIB module version.