MULTIPLE-BRIDGE-MIB: View SNMP OID List / Download MIB

VENDOR: ALLIED TELESIS


 Home MIB: MULTIPLE-BRIDGE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ati 1.3.6.1.4.1.207
         mibobjs 1.3.6.1.4.1.207.8
             atiSwitchObjs 1.3.6.1.4.1.207.8.3
                 atiSystemConfig 1.3.6.1.4.1.207.8.3.1
                     atiSysSerialno 1.3.6.1.4.1.207.8.3.1.1 displaystring read-only
Serial number.
                     atiSysTftpIPAddress 1.3.6.1.4.1.207.8.3.1.2 ipaddress read-write
TFTP Server IP address.
                     atiSysTftpFilename 1.3.6.1.4.1.207.8.3.1.3 displaystring read-write
TFTP file name.
                     atiSysPowerupCount 1.3.6.1.4.1.207.8.3.1.4 integer read-only
Powerup Count.
                     atiSysBrcastCutoffRate 1.3.6.1.4.1.207.8.3.1.5 integer read-write
Broadcast Cutoff Rate. (0..100000)
                     atiSysGatewayIPAddress 1.3.6.1.4.1.207.8.3.1.6 ipaddress read-write
Gateway IP address.
                 atiPortTable 1.3.6.1.4.1.207.8.3.2 no-access
The port setup table.
                     atiPortEntry 1.3.6.1.4.1.207.8.3.2.1 no-access
The port setup entry.
                         atiPort 1.3.6.1.4.1.207.8.3.2.1.1 integer read-only
A number from 1 to number of ports on the switch.
                         atiPortStatus 1.3.6.1.4.1.207.8.3.2.1.2 integer read-only
Port status. Enumeration: 'down': 2, 'up': 1.
                         atiPortDuplexStatus 1.3.6.1.4.1.207.8.3.2.1.3 integer read-write
Port duplex status. Enumeration: 'full': 2, 'half': 1.
                         atiPortForwardedFrames 1.3.6.1.4.1.207.8.3.2.1.4 counter read-only
Number of frames received on this port and forwarded to another port on the system module for processing.
                         atiPortRcvdLocalFrames 1.3.6.1.4.1.207.8.3.2.1.5 counter read-only
Number of frames received where the destination is on this port.
                 atiSwitch 1.3.6.1.4.1.207.8.3.3
                     atiSwitchIPAddress 1.3.6.1.4.1.207.8.3.3.1 ipaddress read-write
Since bridges can now be accessed without an IP address, there needs to be a way to find out there addresses.
                     atiSwitchSubnetMask 1.3.6.1.4.1.207.8.3.3.2 ipaddress read-write
The switch's submask.
                     atiActiveAgingTime 1.3.6.1.4.1.207.8.3.3.3 integer read-write
Active Aging Time.
                     atiPurgeAgingTime 1.3.6.1.4.1.207.8.3.3.4 integer read-write
Purge Aging Time.
                     atiSwitchSTPStatus 1.3.6.1.4.1.207.8.3.3.5 integer read-write
The switch's Spanning Tree status, enter ON or OFF. Enumeration: 'on': 1, 'off': 2.
                     atiSwitchManager 1.3.6.1.4.1.207.8.3.3.6
                         atiSwitchTrapRcvr1 1.3.6.1.4.1.207.8.3.3.6.1 ipaddress read-write
The 1th SNMP Trap Destination.
                         atiSwitchTrapRcvr2 1.3.6.1.4.1.207.8.3.3.6.2 ipaddress read-write
The 2th SNMP Trap Destination.
                         atiSwitchTrapRcvr3 1.3.6.1.4.1.207.8.3.3.6.3 ipaddress read-write
The 3th SNMP Trap Destination.
                         atiSwitchTrapRcvr4 1.3.6.1.4.1.207.8.3.3.6.4 ipaddress read-write
The 4th SNMP Trap Destination.
                     atiSwitchPortMirroring 1.3.6.1.4.1.207.8.3.3.7 integer read-write
The switch's Port Mirroring status, enter ENABLE or DISABLE. Enumeration: 'enable': 1, 'disable': 2.
                     atiSwitchMirroredPort 1.3.6.1.4.1.207.8.3.3.8 integer read-write
The Port to be mirrored.