MRV-IN-REACH-DECNET-MIB: View SNMP OID List / Download MIB

VENDOR: MRV COMMUNICATIONS


 Home MIB: MRV-IN-REACH-DECNET-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, MRV-IN-REACH-PRODUCT-DIVISION-MIB, RFC1289-phivMIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 xDecnet 1.3.6.1.4.1.33.14
       xRcp 1.3.6.1.4.1.33.14.1
           rcpRemoteAddress 1.3.6.1.4.1.33.14.1.1 octet string read-only
If a remote console session exists, the Ethernet address of the remote partner, otherwise zero length.
       xPhiv 1.3.6.1.4.1.33.14.2
           xPhivRoute 1.3.6.1.4.1.33.14.2.1
               phivPathSelection 1.3.6.1.4.1.33.14.2.1.1 integer read-write
The algorithm used to balance traffic between equal next hop paths. 'roundRobin' selects the next hop using a round robin algorithm for each hop. 'samePath' selects the next hop guaranteeing that all packets with the same source/destination pair will always use the same next hop. Enumeration: 'roundRobin': 1, 'samePath': 2.
               phivMaxPaths 1.3.6.1.4.1.33.14.2.1.2 integer read-write
The maximum number of equal cost next hops that the router can remember and successfully load balance between.
               phivStatus 1.3.6.1.4.1.33.14.2.1.3 integer read-only
The status of the DECnet routing software. Enumeration: 'active': 1, 'disabled': 2, 'noInterfacesEnabled': 4, 'badCost': 5, 'noAddressSpecified': 3.
           xPhivCircuit 1.3.6.1.4.1.33.14.2.2
               phivCircuitTable 1.3.6.1.4.1.33.14.2.2.1 no-access
A list of DECnet circuit entries.
                   phivCircuitEntry 1.3.6.1.4.1.33.14.2.2.1.1 no-access
Parameter values for a DECnet circuit.
                       xPhivCircuitIndex 1.3.6.1.4.1.33.14.2.2.1.1.1 integer read-only
Identification of a circuit entry. Same as an interface index (ifIndex).
                       phivCircuitRoutingTimer 1.3.6.1.4.1.33.14.2.2.1.1.2 integer read-write
The maximum time in seconds allowed between Routing updates on the circuit. Different values for LANs vs. WANs.
                       phivCircuitOperCost 1.3.6.1.4.1.33.14.2.2.1.1.3 integer read-only
The actual cost associated with the circuit.
                       phivCircuitErrors 1.3.6.1.4.1.33.14.2.2.1.1.4 counter read-only
The number of routed DECnet packets received in error on this circuit.
                       phivCircuitLastError 1.3.6.1.4.1.33.14.2.2.1.1.5 integer read-only
The error of the last routed DECnet packet received in error on this circuit. Enumeration: 'ageExceeded': 3, 'verificationReject': 8, 'destinationUnreachable': 4, 'partialRoutingUpdate': 7, 'addressOutOfRange': 2, 'packetFormatError': 5, 'noError': 1, 'packetOversized': 6.
                       phivCircuitLastErrorTime 1.3.6.1.4.1.33.14.2.2.1.1.6 datetime read-only
The date and time that the last routed DECnet packet was received in error on this circuit.
                       phivCircuitLastErrorData 1.3.6.1.4.1.33.14.2.2.1.1.7 octet string read-only
The first 22 bytes of the last routed DECnet packet received in error on this circuit.
                       phivCircuitProtocolPriority 1.3.6.1.4.1.33.14.2.2.1.1.8 integer read-write
The priority at which all DECnet routed packets will be placed on the WAN output queue. Enumeration: 'high': 5, 'medium': 3, 'low': 1.
                       phivCircuitRoutingPriority 1.3.6.1.4.1.33.14.2.2.1.1.9 integer read-write
Router's priority to be designated router on this circuit.
           xPhivImport 1.3.6.1.4.1.33.14.2.3
               phivCircuitImportTable 1.3.6.1.4.1.33.14.2.3.1 no-access
A list of circuit import filter entries.
                   phivCircuitImportEntry 1.3.6.1.4.1.33.14.2.3.1.1 no-access
Parameter values for an import filter.
                       phivCircuitImportIf 1.3.6.1.4.1.33.14.2.3.1.1.1 integer read-only
The interface associated with the import routing filter.
                       phivCircuitImportAddr 1.3.6.1.4.1.33.14.2.3.1.1.2 phivaddr read-only
The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database.
                       phivCircuitImportMask 1.3.6.1.4.1.33.14.2.3.1.1.3 phivaddr read-only
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
                       phivCircuitImportAction 1.3.6.1.4.1.33.14.2.3.1.1.4 integer read-write
The action to take if the address field along with the mask field matches the route entry. Enumeration: 'discard': 1, 'accept': 2.
                       phivCircuitImportStatus 1.3.6.1.4.1.33.14.2.3.1.1.5 integer read-write
Setting to 'invalid' removes this import filter from the table. Setting to 'valid' has no effect. Enumeration: 'valid': 2, 'invalid': 1.
           xPhivImportArea 1.3.6.1.4.1.33.14.2.4
               phivCircuitImportAreaTable 1.3.6.1.4.1.33.14.2.4.1 no-access
A list of circuit import area filter entries.
                   phivCircuitImportAreaEntry 1.3.6.1.4.1.33.14.2.4.1.1 no-access
Parameter values for an import area filter.
                       phivCircuitImportAreaIf 1.3.6.1.4.1.33.14.2.4.1.1.1 integer read-only
The interface associated with the import area routing filter.
                       phivCircuitImportAreaAddr 1.3.6.1.4.1.33.14.2.4.1.1.2 phivaddr read-only
The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database.
                       phivCircuitImportAreaMask 1.3.6.1.4.1.33.14.2.4.1.1.3 phivaddr read-only
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
                       phivCircuitImportAreaAction 1.3.6.1.4.1.33.14.2.4.1.1.4 integer read-write
The action to take if the address field along with the mask field matches the route entry. Enumeration: 'discard': 1, 'accept': 2.
                       phivCircuitImportAreaStatus 1.3.6.1.4.1.33.14.2.4.1.1.5 integer read-write
Setting to 'invalid' removes this import area filter from the table. Setting to 'valid' has no effect. Enumeration: 'valid': 2, 'invalid': 1.
           xPhivExport 1.3.6.1.4.1.33.14.2.5
               phivCircuitExportTable 1.3.6.1.4.1.33.14.2.5.1 no-access
A list of circuit export filter entries.
                   phivCircuitExportEntry 1.3.6.1.4.1.33.14.2.5.1.1 no-access
Parameter values for an export filter.
                       phivCircuitExportIf 1.3.6.1.4.1.33.14.2.5.1.1.1 integer read-only
The interface associated with the export routing filter.
                       phivCircuitExportAddr 1.3.6.1.4.1.33.14.2.5.1.1.2 phivaddr read-only
The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database.
                       phivCircuitExportMask 1.3.6.1.4.1.33.14.2.5.1.1.3 phivaddr read-only
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
                       phivCircuitExportAction 1.3.6.1.4.1.33.14.2.5.1.1.4 integer read-write
The action to take if the address field along with the mask field matches the route entry. Enumeration: 'advertise': 2, 'hide': 1.
                       phivCircuitExportStatus 1.3.6.1.4.1.33.14.2.5.1.1.5 integer read-write
Setting to 'invalid' removes this export filter from the table. Setting to 'valid' has no effect. Enumeration: 'valid': 2, 'invalid': 1.
           xPhivExportArea 1.3.6.1.4.1.33.14.2.6
               phivCircuitExportAreaTable 1.3.6.1.4.1.33.14.2.6.1 no-access
A list of circuit export area filter entries.
                   phivCircuitExportAreaEntry 1.3.6.1.4.1.33.14.2.6.1.1 no-access
Parameter values for an export area filter.
                       phivCircuitExportAreaIf 1.3.6.1.4.1.33.14.2.6.1.1.1 integer read-only
The interface associated with the export area routing filter.
                       phivCircuitExportAreaAddr 1.3.6.1.4.1.33.14.2.6.1.1.2 phivaddr read-only
The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database.
                       phivCircuitExportAreaMask 1.3.6.1.4.1.33.14.2.6.1.1.3 phivaddr read-only
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
                       phivCircuitExportAreaAction 1.3.6.1.4.1.33.14.2.6.1.1.4 integer read-write
The action to take if the address field along with the mask field matches the route entry. Enumeration: 'advertise': 2, 'hide': 1.
                       phivCircuitExportAreaStatus 1.3.6.1.4.1.33.14.2.6.1.1.5 integer read-write
Setting to 'invalid' removes this export area filter from the table. Setting to 'valid' has no effect. Enumeration: 'valid': 2, 'invalid': 1.
           xPhivFilter 1.3.6.1.4.1.33.14.2.7
               phivCircuitFilterTable 1.3.6.1.4.1.33.14.2.7.1 no-access
A list of circuit filter entries.
                   phivCircuitFilterEntry 1.3.6.1.4.1.33.14.2.7.1.1 no-access
Parameter values for a filter.
                       phivCircuitFilterIf 1.3.6.1.4.1.33.14.2.7.1.1.1 integer read-only
The interface associated with the filter entry.
                       phivCircuitFilterDstAddr 1.3.6.1.4.1.33.14.2.7.1.1.2 phivaddr read-only
The address (node or area) to match against the destination address of the packet to decide whether to forward the packet.
                       phivCircuitFilterDstMask 1.3.6.1.4.1.33.14.2.7.1.1.3 phivaddr read-only
The mask which is ANDed with the destination address field and the packet's destination address to determine whether the address matches the packet's address.
                       phivCircuitFilterSrcAddr 1.3.6.1.4.1.33.14.2.7.1.1.4 phivaddr read-only
The address (node or area) to match against the source address of the packet to decide whether to forward the packet.
                       phivCircuitFilterSrcMask 1.3.6.1.4.1.33.14.2.7.1.1.5 phivaddr read-only
The mask which is ANDed with the source address field and the packet's source address to determine whether the address matches the packet's address.
                       phivCircuitFilterAction 1.3.6.1.4.1.33.14.2.7.1.1.6 integer read-write
The action to take if the address fields along with the mask fields match the packet. Enumeration: 'forward': 2, 'discard': 1.
                       phivCircuitFilterStatus 1.3.6.1.4.1.33.14.2.7.1.1.7 integer read-write
Setting to 'invalid' removes this Filter filter from the table. Setting to 'valid' has no effect. Enumeration: 'valid': 2, 'invalid': 1.
           xPhivTraffic 1.3.6.1.4.1.33.14.2.8
               phivTrafficSort 1.3.6.1.4.1.33.14.2.8.1 integer read-write
Setting to 'execute' causes the most recent traffic information to be sorted into the phivTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to 'ready' has no effect. Enumeration: 'ready': 1, 'execute': 2.
               phivTrafficTable 1.3.6.1.4.1.33.14.2.8.2 no-access
A list of traffic entries, sorted in the order specified by phivTrafficSort.
                   phivTrafficEntry 1.3.6.1.4.1.33.14.2.8.2.1 no-access
A traffic entry.
                       phivTrafficIndex 1.3.6.1.4.1.33.14.2.8.2.1.1 integer read-only
Identification of this traffic entry.
                       phivTrafficPercent 1.3.6.1.4.1.33.14.2.8.2.1.2 integer read-only
The percentage of total traffic that this traffic entry represents, in tenths of a percent.
                       phivTrafficDst 1.3.6.1.4.1.33.14.2.8.2.1.3 phivaddr read-only
The destination to which the traffic entry applies.
                       phivTrafficSrc 1.3.6.1.4.1.33.14.2.8.2.1.4 phivaddr read-only
The source to which the traffic entry applies.
                       phivTrafficIf 1.3.6.1.4.1.33.14.2.8.2.1.5 integer read-only
The inbound interface to which the traffic entry applies. This value is the same as IfIndex.