MRV-IN-REACH-BOOT-SERVER-MIB: View SNMP OID List / Download MIB

VENDOR: MRV COMMUNICATIONS


 Home MIB: MRV-IN-REACH-BOOT-SERVER-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 xBootServer 1.3.6.1.4.1.33.6
     xBsBasic 1.3.6.1.4.1.33.6.1
         basicLogLimit 1.3.6.1.4.1.33.6.1.1 integer read-write
Maximum allowed number of kilobytes for recording events. Corresponds directly to MANAGER LOG FILE SIZE and the value labeled 'Log File Size:' in the MANAGER CHARACTERISTICS display.
         basicActiveLimit 1.3.6.1.4.1.33.6.1.2 integer read-write
Maximum allowed number of simultaneous service dialogs. Corresponds directly to MANAGER SIMULTANEOUS and the value labeled 'Maximum simultaneous requests:' in the MANAGER CHARACTERISTICS display.
         basicActiveNumber 1.3.6.1.4.1.33.6.1.3 gauge read-only
Number of active service dialogs. Corresponds indirectly to the list of active clients in the MANAGER STATUS display.
         basicClientNumber 1.3.6.1.4.1.33.6.1.4 gauge read-only
Number of defined clients. Corresponds indirectly to the list of defined clients in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
         basicOffersSent 1.3.6.1.4.1.33.6.1.5 counter read-only
Total number of service offers sent in response to client requests. Corresponds directly to the value labeled 'Total service offers sent:' in the MANAGER STATUS display.
         basicEventTotal 1.3.6.1.4.1.33.6.1.6 gauge read-only
Total number of events that have been written to the event log since it was last purged. This may be less than the number currently in the log. Corresponds directly to the value labeled 'Total Messages Logged:' in the MANAGER EVENTS display.
         basicEventPurge 1.3.6.1.4.1.33.6.1.7 integer read-write
Control to cause emptying the event log. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the event log to immediately become empty. Corresponds directly to the PURGE MANAGER LOG FILE command. Enumeration: 'ready': 1, 'execute': 2.
         activeTable 1.3.6.1.4.1.33.6.1.8 no-access
A list of active client dialog entries. The number of entries is given by basicActiveNumber.
             activeEntry 1.3.6.1.4.1.33.6.1.8.1 no-access
Parameter values for an active client dialog entry.
                 activeIdentificationType 1.3.6.1.4.1.33.6.1.8.1.1 addresstype read-only
The type of identification value in activeIdentification. Corresponds indirectly to the value labeled 'EthernetAddress' in the MANAGER STATUS display.
                 activeIdentification 1.3.6.1.4.1.33.6.1.8.1.2 octet string read-only
Identification of the active partner. Corresponds directly to the value labeled 'EthernetAddress' in the MANAGER STATUS display.
                 activeFunction 1.3.6.1.4.1.33.6.1.8.1.3 integer read-only
The function the server is performing with the partner. Corresponds directly to the value labeled 'Function' in the MANAGER STATUS display. Enumeration: 'load': 2, 'dump': 3, 'parameterStore': 1, 'imageUpdate': 4.
                 activeSoftwareVersionType 1.3.6.1.4.1.33.6.1.8.1.4 integer read-only
If activeFunction is 'load', the software version being sent to the client, otherwise 'notApplicable'. Corresponds to the letter in the software version labeled 'Version' in the MANAGER STATUS display. alpha 'A': alpha test beta 'B': beta test production null: normal, production software special 'S': special, custom software diagnostic 'D': diagnostic, debug software Enumeration: 'diagnostic': 5, 'notApplicable': 6, 'beta': 2, 'production': 3, 'alpha': 1, 'special': 4.
                 activeSoftwareVersion 1.3.6.1.4.1.33.6.1.8.1.5 octet string read-only
If activeFunction is 'load', the 4-byte software version being sent to the client, otherwise zero length. In order, the octets contain major version, minor version, ECO, and pre-release number. Corresponds to the numbers in the software version labeled 'Version' in the MANAGER STATUS display. For example, the version display for activeSoftwareVersionType 'production' and activeSoftwareVersion '2.2.0.0' is 'V2.2'. The version display for activeSoftwareVersionType 'beta' and activeSoftwareVersion '3.1.0.4' is 'V3.1B4'.
                 activeParameterVersion 1.3.6.1.4.1.33.6.1.8.1.6 integer read-only
If activeFunction is 'parameterStore', the parameter version being stored by the client, otherwise zero. Corresponds directly to the value labeled 'Version' in the MANAGER STATUS display.
                 activeCurrentSequence 1.3.6.1.4.1.33.6.1.8.1.7 integer read-only
The current dialog sequence number. Corresponds directly to the value labeled 'Seq' in the MANAGER STATUS display.
                 activeBytesRemaining 1.3.6.1.4.1.33.6.1.8.1.8 integer read-only
The number of bytes remaining to be transferred in the dialog. Corresponds directly to the value labeled 'Left' in the MANAGER STATUS display.
                 activeFile 1.3.6.1.4.1.33.6.1.8.1.9 displaystring read-only
The name of the file being used in the dialog. Corresponds directly to the value labeled 'File' in the MANAGER STATUS display.
                 activeStatus 1.3.6.1.4.1.33.6.1.8.1.10 dialogstatus read-only
The final status of the most recent attempt to get an image. Corresponds directly to the value labeled 'Get Status:' in the DEVICE STATUS display.
                 activeState 1.3.6.1.4.1.33.6.1.8.1.11 integer read-only
The dynamic state of an active attempt to get an image. Corresponds directly to the value labeled 'Get State:' in the DEVICE STATUS display. Enumeration: 'openFile': 5, 'closePartner': 8, 'internal1': 2, 'internal2': 3, 'writeFile': 7, 'idle': 1, 'cleanup': 10, 'done': 11, 'receivePartner': 6, 'error': 12, 'openPartner': 4, 'closeFile': 9.
         clientTable 1.3.6.1.4.1.33.6.1.9 no-access
A list of client data base entries. The number of entries is given by basicClientNumber.
             clientEntry 1.3.6.1.4.1.33.6.1.9.1 no-access
Parameter values for a client data base entry.
                 clientIdentificationType 1.3.6.1.4.1.33.6.1.9.1.1 addresstype read-only
The type of identification value in clientIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.
                 clientIdentification 1.3.6.1.4.1.33.6.1.9.1.2 octet string read-only
Identification of the client, either a hardware type or an Ethernet address, depending on clientIdentificationType. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.
                 clientEntryStatus 1.3.6.1.4.1.33.6.1.9.1.3 integer read-write
The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual removal of the entry is implementation specific. Enumeration: 'valid': 2, 'invalid': 1.
                 clientName 1.3.6.1.4.1.33.6.1.9.1.4 displaystring read-write
A name that may be used to identify the client. Corresponds directly to the value labeled 'Name' in the MANAGER NODE display.
                 clientLoadFile 1.3.6.1.4.1.33.6.1.9.1.5 displaystring read-write
The file with the client's load image. Corresponds directly to the value labeled 'Load File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                 clientDiagnosticFile 1.3.6.1.4.1.33.6.1.9.1.6 displaystring read-write
The file with the client's diagnostic test image. Corresponds directly to the value labeled 'Diag File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                 clientLoadService 1.3.6.1.4.1.33.6.1.9.1.7 integer read-write
Control for allowing load service for the client. Corresponds directly to the value labeled 'Load' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays. Enumeration: 'disabled': 1, 'enabled': 2.
                 clientDumpService 1.3.6.1.4.1.33.6.1.9.1.8 integer read-write
Control for allowing dump service for the client. Corresponds directly to the value labeled 'Dump' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays. Enumeration: 'disabled': 1, 'enabled': 2.
         namedTable 1.3.6.1.4.1.33.6.1.10 no-access
A list of named client data base entries. The number of entries is given by basicClientNumber.
               namedEntry 1.3.6.1.4.1.33.6.1.10.1 no-access
Parameter values for a named client data base entry.
                   namedIdentificationType 1.3.6.1.4.1.33.6.1.10.1.1 addresstype read-only
The type of identification value in namedIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.
                   namedIdentification 1.3.6.1.4.1.33.6.1.10.1.2 octet string read-only
Identification of the client, either a hardware type or an Ethernet address, depending on namedIdentificationType. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled 'Ethernet Address' in the MANAGER NODE display or 'Ethernet Address', 'Device', and 'Global Devices' or 'Local Devices' in the MANAGER GLOBAL and LOCAL displays.
                   namedEntryStatus 1.3.6.1.4.1.33.6.1.10.1.3 integer read-only
The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual removal of the entry is implementation specific. Enumeration: 'valid': 2, 'invalid': 1.
                   namedName 1.3.6.1.4.1.33.6.1.10.1.4 displaystring read-only
A name that may be used to identify the client. Corresponds directly to the value labeled 'Name' in the MANAGER NODE display.
                   namedLoadFile 1.3.6.1.4.1.33.6.1.10.1.5 displaystring read-only
The file with the client's load image. Corresponds directly to the value labeled 'Load File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                   namedDiagnosticFile 1.3.6.1.4.1.33.6.1.10.1.6 displaystring read-only
The file with the client's diagnostic test image. Corresponds directly to the value labeled 'Diag File' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                   namedLoadService 1.3.6.1.4.1.33.6.1.10.1.7 integer read-only
Control for allowing load service for the client. Corresponds directly to the value labeled 'Load' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays. Enumeration: 'disabled': 1, 'enabled': 2.
                   namedDumpService 1.3.6.1.4.1.33.6.1.10.1.8 integer read-only
Control for allowing dump service for the client. Corresponds directly to the value labeled 'Dump' in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays. Enumeration: 'disabled': 1, 'enabled': 2.
         xEventTable 1.3.6.1.4.1.33.6.1.11 no-access
A list of event entries. The number of entries is given by basicEventNumber.
               xEventEntry 1.3.6.1.4.1.33.6.1.11.1 no-access
Parameter values for a event entry.
                   xEventIndex 1.3.6.1.4.1.33.6.1.11.1.1 integer read-only
In identification number for an event. The value 1 indicates the oldest event in the file, with subsequent numbers indicating sequential events. The event text for a given number may change as a circular event log wraps over its beginning. Corresponds directly to the relative position of an event in the MANAGER EVENTS display.
                   xEventText 1.3.6.1.4.1.33.6.1.11.1.2 displaystring read-only
The text of the event, including date, time and other information. Corresponds directly to the individual event text in the MANAGER EVENTS display.
         basicDeviceNumber 1.3.6.1.4.1.33.6.1.12 integer read-only
The system's number of mass-storage devices.
         deviceTable 1.3.6.1.4.1.33.6.1.13 no-access
A list of device entries. The number of entries is given by basicDeviceNumber.
               deviceEntry 1.3.6.1.4.1.33.6.1.13.1 no-access
Parameter values for a device entry.
                   deviceIndex 1.3.6.1.4.1.33.6.1.13.1.1 integer read-only
In identification number for a device, in the range 1 to basicDeviceNumber
                   deviceName 1.3.6.1.4.1.33.6.1.13.1.2 displaystring read-only
A name by which the device is known in other displays, such as 'C1' or 'D2'.
                   deviceDescr 1.3.6.1.4.1.33.6.1.13.1.3 displaystring read-only
Details of the device type, including, for example, size, manufacturer, Flash versus RAM, and such. Corresponds directly to the value labeled 'Device Type: in the MANAGER DEVICE STATUS display.
                   deviceOperation 1.3.6.1.4.1.33.6.1.13.1.4 integer read-only
Current operational state of the device. Corresponds directly the value labeled 'Device Operation:' in the MANAGER DEVICE STATUS display. Enumeration: 'loadingClient': 8, 'format': 3, 'read': 1, 'write': 2, 'idle': 4, 'erase': 5, 'paramStore': 6, 'unpack': 7.
                   deviceFormat 1.3.6.1.4.1.33.6.1.13.1.5 integer read-only
Formatting status of the device. Corresponds directly the presence of one of the value labels under the label 'Device Status:' in the MANAGER DEVICE STATUS display. Enumeration: 'unformatted': 1, 'unknown': 3, 'formatted': 2.
                   deviceProtection 1.3.6.1.4.1.33.6.1.13.1.6 integer read-only
Write-protect status of the device. Corresponds directly the presence of one of the value labels under the label 'Device Status:' in the MANAGER DEVICE STATUS display. Enumeration: 'unknown': 3, 'write-protected': 2, 'write-enabled': 1.
                   deviceFormatMedium 1.3.6.1.4.1.33.6.1.13.1.7 integer read-write
Control to cause formatting of the medium in the device. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the device to be formatted. Corresponds directly to the FORMAT DEVICE command. Enumeration: 'ready': 1, 'execute': 2.
                   deviceGetFile 1.3.6.1.4.1.33.6.1.13.1.8 integer read-write
Control to cause getting a file to the device from a remote host system. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the get to be attempted. Corresponds directly to the GET DEVICE command. When set to 'execute', the objects deviceGetFileHostIdentificationType, deviceGetFileHostIdentification, deviceGetFileName and deviceGetFileArea must be somewhere in the same set request message. Enumeration: 'ready': 1, 'execute': 2, 'abort': 3.
                   deviceGetFileHostIdentificationType 1.3.6.1.4.1.33.6.1.13.1.9 addresstype read-write
The type of identification value in deviceIdentification. Corresponds indirectly to ADDRESS in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is 'undefined'.
                   deviceGetFileHostIdentification 1.3.6.1.4.1.33.6.1.13.1.10 octet string read-write
Identification of the host to get the file from, with type depending on deviceIdentificationType. Corresponds directly to ADDRESS in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is zero length.
                   deviceGetFileName 1.3.6.1.4.1.33.6.1.13.1.11 displaystring read-write
The name of the file to get. Corresponds directly to LOAD FILE in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is zero length.
                   deviceGetFileArea 1.3.6.1.4.1.33.6.1.13.1.12 integer read-write
The area number in which to put the file. Corresponds directly to AREA in the GET DEVICE command. If it is not relevant to the particular device, it is ignored. This object may not be set outside the context of setting deviceGetFile to 'execute'. In response to a get-request or get-next-request, the value of this object is zero.
                   deviceFormatOption 1.3.6.1.4.1.33.6.1.13.1.13 integer read-write
Formatting option to apply. Corresponds directly to the OPTION in the FORMAT DEVICE command. This object may not be set outside the context of setting deviceFormatMedium to 'execute'. In response to a get-request or get-next-request, the value of this object is zero.
                   deviceFormatRedundantParams 1.3.6.1.4.1.33.6.1.13.1.14 integer read-write
Control for creating redundant parameter storage areas when formatting. Corresponds directly to NONREDUNDANT in the FORMAT DEVICE command. This object may not be set outside the context of setting deviceFormatMedium to 'execute'. In response to a get-request or get-next-request, the value of this object is zero. Enumeration: 'nonredundant': 1, 'redundant': 2.
                   devicePreviousStatus 1.3.6.1.4.1.33.6.1.13.1.15 dialogstatus read-only
Result of the immediately previous concluded boot dialog. Corresponds directly to the value labeled 'Get File Previous Status:' in the SHOW CARD STATUS display.
     xDump 1.3.6.1.4.1.33.6.2
         dumpService 1.3.6.1.4.1.33.6.2.1 integer read-write
Control for allowing dump service for any client. Corresponds directly to DUMP and the value labeled 'Dump:' in the MANAGER CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
         dumpDrive 1.3.6.1.4.1.33.6.2.2 integer read-write
Identification number of the disk drive where dumps are stored. Corresponds directly to DUMP DRIVE and the value labeled 'Dump Drive:' in the MANAGER CHARACTERISTICS display.
         dumpMerit 1.3.6.1.4.1.33.6.2.3 integer read-write
Relative preference for this dump server over others. Corresponds directly to DUMP MERIT and the value labeled 'Dump Merit:' in the MANAGER CHARACTERISTICS display.
         dumpSize 1.3.6.1.4.1.33.6.2.4 integer read-write
Type of dump file to keep. Corresponds directly to DUMP SIZE and the value labeled 'Dump Size:' in the MANAGER CHARACTERISTICS display. Enumeration: 'small': 1, 'full': 2.
         dumpCompleted 1.3.6.1.4.1.33.6.2.5 counter read-only
The number of dumps completed since system initialization. Corresponds directly to the value labeled 'Dump Operations Completed:' in the MANAGER STATUS display.
         dumpActive 1.3.6.1.4.1.33.6.2.6 gauge read-only
The number of dumps in progress. Corresponds directly to the value labeled 'Currently Dumping:' in the MANAGER STATUS display.
         dumpFileNumber 1.3.6.1.4.1.33.6.2.7 gauge read-only
The number of dump files currently stored. Corresponds directly to the value labeled 'Network dump files' and 'files' in the MANAGER FILES display.
         dumpFileTable 1.3.6.1.4.1.33.6.2.8 no-access
A list of dump file entries. The number of entries is given by dumpFileNumber.
             dumpFileEntry 1.3.6.1.4.1.33.6.2.8.1 no-access
Parameter values for a dump file entry.
                 dumpFileIdentificationType 1.3.6.1.4.1.33.6.2.8.1.1 addresstype read-only
The type of identification value in dumpFileIdentification. Corresponds indirectly to a file name part in the section labeled 'Network dump files' in the MANAGER FILES display.
                 dumpFileIdentification 1.3.6.1.4.1.33.6.2.8.1.2 octet string read-only
Identification of the dump file, an Ethernet address, as indicated by dumpFileIdentificationType. Corresponds indirectly to a file name part in the section labeled 'Network dump files' in the MANAGER FILES display.
                 dumpFileEntryStatus 1.3.6.1.4.1.33.6.2.8.1.3 integer read-write
The status of the entry. Set to 'invalid' to remove the entry, which corresponds indirectly to the PURGE MANAGER DUMP FILES command. Actual removal of the entry is implementation specific. Enumeration: 'valid': 2, 'invalid': 1.
                 dumpFileCreation 1.3.6.1.4.1.33.6.2.8.1.4 datetime read-only
The time the dump file was created. Corresponds directly to a date and time in the section labeled 'Network dump files' in the MANAGER FILES display.
                 dumpFileSize 1.3.6.1.4.1.33.6.2.8.1.5 integer read-only
The number of bytes stored in the dump file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Network dump files' in the MANAGER FILES display.
     xLoad 1.3.6.1.4.1.33.6.3
         loadService 1.3.6.1.4.1.33.6.3.1 integer read-write
Control for allowing load service for any client. Corresponds directly to LOAD and the value labeled 'Load:' in the MANAGER CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
         loadMerit 1.3.6.1.4.1.33.6.3.2 integer read-write
Relative preference for this load server over others. Corresponds directly to LOAD MERIT and the value labeled 'Load Merit:' in the MANAGER CHARACTERISTICS display.
         loadCompleted 1.3.6.1.4.1.33.6.3.3 counter read-only
The number of loads completed since system initialization. Corresponds directly to the value labeled 'Load Operations Completed:' in the MANAGER STATUS display.
         loadActive 1.3.6.1.4.1.33.6.3.4 gauge read-only
The number of loads in progress. Corresponds directly to the value labeled 'Currently Loading:' in the MANAGER STATUS display.
         loadFileNumber 1.3.6.1.4.1.33.6.3.5 gauge read-only
The number of load files currently stored. Corresponds directly to the value labeled 'Load image files' and 'files' in the MANAGER FILES display.
         loadFileTable 1.3.6.1.4.1.33.6.3.6 no-access
A list of load file entries. The number of entries is given by loadFileNumber.
             loadFileEntry 1.3.6.1.4.1.33.6.3.6.1 no-access
Parameter values for a load file entry.
                 loadFileName 1.3.6.1.4.1.33.6.3.6.1.1 displaystring read-only
The name of a load file. Corresponds directly to a file name part in the section labeled 'Load image files' in the MANAGER FILES display.
                 loadFileCreation 1.3.6.1.4.1.33.6.3.6.1.2 datetime read-only
The time the load file was created. Corresponds directly to a date and time in the section labeled 'Load image files' in the MANAGER FILES display.
                 loadFileSize 1.3.6.1.4.1.33.6.3.6.1.3 integer read-only
The number of bytes stored in the load file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Load image files' in the MANAGER FILES display.
                 loadFileSoftwareVersionType 1.3.6.1.4.1.33.6.3.6.1.4 integer read-only
The software version type of the image in the load file. Corresponds directly to a software version in the section labeled 'Load image files' in the MANAGER FILES display. alpha 'A': alpha test beta 'B': beta test production null: normal, production software special 'S': special, custom software Enumeration: 'alpha': 1, 'beta': 2, 'production': 3, 'special': 4.
                 loadFileSoftwareVersion 1.3.6.1.4.1.33.6.3.6.1.5 octet string read-only
The software version of the image in the load file. Corresponds directly to a software version in the section labeled 'Load image files' in the MANAGER FILES display. For example, the version display for loadFileSoftwareVersionType 'production' and loadFileSoftwareVersion '2.2.0.0' is 'V2.2'. The version display for loadFileSoftwareVersionType 'beta' and loadFileSoftwareVersion '3.1.0.4' is 'V3.1B4'.
     xParam 1.3.6.1.4.1.33.6.4
         paramService 1.3.6.1.4.1.33.6.4.1 integer read-write
Control for allowing parameter storage service for any client. Corresponds directly to PARAMETER SERVICE and the value labeled 'Parameter Service:' in the MANAGER CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
         paramDefaultService 1.3.6.1.4.1.33.6.4.2 integer read-write
Control for allowing default parameter loading service for any client. Corresponds directly to PARAMETER DEFAULT SERVICE and the value labeled 'Parameter Default Service:' in the MANAGER CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
         paramDrive 1.3.6.1.4.1.33.6.4.3 integer read-write
Identification number of the disk drive where parameters are stored. Corresponds directly to PARAMETER DRIVE and the value labeled 'Parameter Drive:' in the MANAGER CHARACTERISTICS display.
         paramActive 1.3.6.1.4.1.33.6.4.4 gauge read-only
The number of params in progress. Corresponds directly to the value labeled 'Currently Paraming:' in the MANAGER STATUS display.
         paramStorageActive 1.3.6.1.4.1.33.6.4.5 gauge read-only
The number of parameter storage operations in progress. Corresponds directly to the value labeled 'Currently saving parameters:' in the MANAGER STATUS display.
         paramFileNumber 1.3.6.1.4.1.33.6.4.6 gauge read-only
The number of parameter files currently stored. Corresponds directly to the value labeled 'Parameter files' and 'files' in the MANAGER FILES display.
         paramFileTable 1.3.6.1.4.1.33.6.4.7 no-access
A list of param file entries. The number of entries is given by paramFileNumber.
             paramFileEntry 1.3.6.1.4.1.33.6.4.7.1 no-access
Parameter values for a param file entry.
                 paramFileIdentificationType 1.3.6.1.4.1.33.6.4.7.1.1 addresstype read-only
The type of identification value in paramFileIdentification. Corresponds indirectly to a file name part in the section labeled 'Parameter files' in the MANAGER FILES display.
                 paramFileIdentification 1.3.6.1.4.1.33.6.4.7.1.2 octet string read-only
Identification of the param file, an Ethernet address, as indicated by paramFileIdentificationType. Corresponds indirectly to a file name part in the section labeled 'Parameter files' in the MANAGER FILES display.
                 paramFileEntryStatus 1.3.6.1.4.1.33.6.4.7.1.3 integer read-write
The status of the entry. Set to 'invalid' to remove the entry, which corresponds indirectly to the PURGE MANAGER PARAMETER FILES command. Actual removal of the entry is implementation specific. Enumeration: 'valid': 2, 'invalid': 1.
                 paramFileWrite 1.3.6.1.4.1.33.6.4.7.1.4 datetime read-only
The time the parameter file was last written. Corresponds directly to a date and time in the section labeled 'Parameter files' in the MANAGER FILES display.
                 paramFileSize 1.3.6.1.4.1.33.6.4.7.1.5 integer read-only
The number of bytes stored in the param file. Corresponds directly to the value labeled 'bytes' in the section labeled 'Parameter files' in the MANAGER FILES display.
                 paramFileParameterVersion 1.3.6.1.4.1.33.6.4.7.1.6 integer read-only
The version number of the parameter data in the file. Corresponds directly to the value labeled 'ver' in the section labeled 'Parameter files' in the MANAGER FILES display.