MOXA-W2x50A-MIB: View SNMP OID List / Download MIB

VENDOR: MOXA TECHNOLOGIES CO.


 Home MIB: MOXA-W2x50A-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 moxa 1.3.6.1.4.1.8691
           nport 1.3.6.1.4.1.8691.2
               w2x50A 1.3.6.1.4.1.8691.2.13
The MIB module for Moxa NPort W2x50A series specific information.
                     swMgmt 1.3.6.1.4.1.8691.2.13.1
                         overview 1.3.6.1.4.1.8691.2.13.1.1
                             modelName 1.3.6.1.4.1.8691.2.13.1.1.1 displaystring read-only
The model name of the NPort. The possible values of this parameter are: 'NPort W2x50A' for NPort W2x50A.
                             serialNumber 1.3.6.1.4.1.8691.2.13.1.1.2 integer read-only
The serial number of the NPort. Every NPort W2x50A series device server is assigned a unique serial number before it is shipped.
                             firmwareVersion 1.3.6.1.4.1.8691.2.13.1.1.3 displaystring read-only
The version of the firmware currently running on the NPort.
                             ethIPAddress 1.3.6.1.4.1.8691.2.13.1.1.4 displaystring read-only
The IP address of the NPort's Ethernet interface.
                             ethMacAddress 1.3.6.1.4.1.8691.2.13.1.1.5 macaddress read-only
The MAC address of the NPort's Ethernet interface.
                             wlanIPAddress 1.3.6.1.4.1.8691.2.13.1.1.6 displaystring read-only
The IP address of the NPort's WLAN interface.
                             wlanMacAddress 1.3.6.1.4.1.8691.2.13.1.1.7 macaddress read-only
The MAC address of the NPort's WLAN interface.
                             wlanSSID 1.3.6.1.4.1.8691.2.13.1.1.8 displaystring read-only
The SSID of WLAN.
                             wlanNetworkType 1.3.6.1.4.1.8691.2.13.1.1.9 displaystring read-only
Network Type of Wireless LAN. The possible values are 'Infrastrcture Mode' and 'Ad-hoc Mode'
                             wlanSecurityMode 1.3.6.1.4.1.8691.2.13.1.1.10 displaystring read-only
Security mode of Wireless LAN. The possible values are 'Open System', 'Shared Key', 'WPA', 'WPA-PSK', 'WPA2', 'WPA2-PSK'
                             wlanRFType 1.3.6.1.4.1.8691.2.13.1.1.11 displaystring read-only
RF type of Wireless LAN. The possible values are 'Auto', '802.11b', '802.11g'
                             wlanCountryCode 1.3.6.1.4.1.8691.2.13.1.1.12 displaystring read-only
WLAN country code
                             wlanFastRoaming 1.3.6.1.4.1.8691.2.13.1.1.13 displaystring read-only
Fast roaming state
                             activeNetworkPort 1.3.6.1.4.1.8691.2.13.1.1.14 displaystring read-only
Current active network port. The possible values are 'WLAN', 'Ethernet'
                             upTime 1.3.6.1.4.1.8691.2.13.1.1.15 displaystring read-only
The time (in human-readable notation) since the system was last re-initialized.
                             serialPort1 1.3.6.1.4.1.8691.2.13.1.1.16 displaystring read-only
View NPort's serial port 1 setting.
                             serialPort2 1.3.6.1.4.1.8691.2.13.1.1.17 displaystring read-only
View NPort's serial port 2 setting.
                         basicSetting 1.3.6.1.4.1.8691.2.13.1.2
                             serverSetting 1.3.6.1.4.1.8691.2.13.1.2.1
                                 serverName 1.3.6.1.4.1.8691.2.13.1.2.1.1 displaystring read-write
A text string used to identify the NPort.
                                 serverLocation 1.3.6.1.4.1.8691.2.13.1.2.1.2 displaystring read-write
A text string used to identify the location of the NPort. This option is useful for specifying the location or application of different NPort device servers.
                             timeSetting 1.3.6.1.4.1.8691.2.13.1.2.2
                                 timeZone 1.3.6.1.4.1.8691.2.13.1.2.2.1 integer read-write
The time-zone index of the NPort. Enumeration: 'GMT_0430_Kabul': 40, 'GMT_0100_Brussels-Copenhagen-Madrid-Paris-Vilnius': 26, 'GMT-0600_Saskatchewan': 9, 'GMT_1100_Magadan-Solomon-Is-New-Caledonia': 61, 'GMT_0500_Islamabad-Karachi-Tashkent': 42, 'GMT-0700_Mountain-Time-US_Canada': 6, 'GMT_0300_Moscow-St-Petersburg-Volgograd': 35, 'GMT_0500_Ekaterinburg': 41, 'GMT_0200_Athens-Istanbul-Minsk': 28, 'GMT_0330_Tehran': 37, 'GMT_0900_Osaka-Sapporo-Tokyo': 51, 'GMT_0800_Perth': 48, 'GMT-0400_Atlantic-Time-Canada': 14, 'GMT_1000_Canberra-Melbourne-Sydney': 57, 'GMT_0600_Colombo': 45, 'GMT_0400_Abu-Dhabi-Muscat': 38, 'GMT_1000_Vladivostok': 60, 'GMT-0100_Azores-Cape-Verde-Is': 21, 'GMT_1000_Hobart': 59, 'GMT-0300_Brasilia': 18, 'GMT-0400_Santiago': 16, 'GMT-0500_Indiana-East': 12, 'GMT_0100_Amsterdam-Berlin-Bern-Rome-Stockholm-Vienna': 24, 'GMT_1200_Auckland-Wllington': 62, 'GMT-1100_Midway-Island-Samoa': 1, 'GMT-1000_Hawaii': 2, 'GMT_Greenich-Mean-Time_Dublin-Edinburgh-Lisbon-London': 23, 'GMT_0200_Jerusalem': 33, 'GMT-0330_Newfoundland': 17, 'GMT_0930_Adelaide': 54, 'GMT_0800_Taipei': 50, 'GMT_0900_Yakutsk': 53, 'GMT_0300_Mairobi': 36, 'GMT_0600_Astana-Almaty-Dhaka': 44, 'GMT_0200_Harare-Pretoria': 31, 'GMT-0600_Central-Time-US_Canada': 7, 'GMT-1200_Eniwetok-Kwajalein': 0, 'GMT-0500_Eastern-Time-US_Canada': 11, 'GMT_0300_Baghdad-Kuwait-Riyadh': 34, 'GMT-0500_Bogota-Lima-Quito': 10, 'GMT-0900_Alaska': 3, 'GMT-0600_Mexico-City-Tegucigalpa': 8, 'GMT_0700_Bangkok-Hanoi-Jakarta': 46, 'GMT_0200_Bucharest': 29, 'GMT-0200_Mid-Atlantic': 20, 'GMT_0100_Sarajevo-Skopje-Warsaw-Zagreb': 27, 'GMT_Casabanca-Monrovia': 22, 'GMT-0300_Buenos-Aires': 19, 'GMT_0800_Beijing-Chongqing-Hong-Kong-Urumqi': 47, 'GMT_0200_Helsinki-Riga-Sofia-Tallinn': 32, 'GMT_0530_Bombay-Calcutta-Madras-New-Delhi': 43, 'GMT_0800_Singapore': 49, 'GMT-0430_Caracas': 13, 'GMT_0400_Baku-Tbilisi': 39, 'GMT_1000_Guam-Port-Moresby': 58, 'GMT_0930_Darwin': 55, 'GMT_0900_Seoul': 52, 'GMT_1200_Fiji-Kamchatka-Marshall-Is': 63, 'GMT_0100_Belgrade-Bratislava-Budapest-Ljubljana-Prague': 25, 'GMT_1000_Brisbane': 56, 'GMT-0800_Pacific-Time-US_Canada-Tijuana': 4, 'GMT-0400_Georgetown-La-Paz': 15, 'GMT_0200_Cairo': 30, 'GMT-0700_Arizona': 5.
                                 localTime 1.3.6.1.4.1.8691.2.13.1.2.2.2 displaystring read-write
The system time in the following format yyyy/mm/dd hh:mm:ss
                                 timeServer 1.3.6.1.4.1.8691.2.13.1.2.2.3 displaystring read-write
The NPort W2x50A series device server uses SNTP (RFC-1769) for auto time calibration. Input the correct 'Time server' IP address or domain name. Once the NPort W2x50A series device server is configured with the correct Time server address, it will request time information from the Time server every 10 minutes.
                         networkSetting 1.3.6.1.4.1.8691.2.13.1.3
                             generalSetting 1.3.6.1.4.1.8691.2.13.1.3.1
                                 dnsServer1IpAddr 1.3.6.1.4.1.8691.2.13.1.3.1.1 ipaddress read-write
The first DNS server address. When the user wants to visit a particular website, the computer asks a Domain Name System (DNS) server for the website's correct IP address, and then the computer uses the response to connect to the web server. DNS is the way that Internet domain names are identified and translated into IP addresses. A domain name is an alphanumeric name, such as moxa.com, that it is usually easier to remember. A DNS server is a host that translates this kind of text-based domain name into the numeric IP address used to establish a TCP/IP connection.
                                 dnsServer2IpAddr 1.3.6.1.4.1.8691.2.13.1.3.1.2 ipaddress read-write
The second DNS server address. When the user wants to visit a particular website, the computer asks a Domain Name System (DNS) server for the website's correct IP address, and then the computer uses the response to connect to the web server. DNS is the way that Internet domain names are identified and translated into IP addresses. A domain name is an alphanumeric name, such as moxa.com, that it is usually easier to remember. A DNS server is a host that translates this kind of text-based domain name into the numeric IP address used to establish a TCP/IP connection.
                             ethernetSetting 1.3.6.1.4.1.8691.2.13.1.3.2
                                 ethIpConfiguration 1.3.6.1.4.1.8691.2.13.1.3.2.1 integer read-write
The IP configuration mode of the NPort. You can choose from four possible IP configuration modes: Static, DHCP, DHCP/BOOTP, BOOTP. Enumeration: 'dhcp': 1, 'static': 0, 'bootp': 2.
                                 ethIpAddress 1.3.6.1.4.1.8691.2.13.1.3.2.2 ipaddress read-write
An IP address is a number assigned to a network device (such as a computer) as a permanent address on the network. Computers use the IP address to identify and talk to each other over the network. Choose a proper IP address that is unique and valid in your network environment.
                                 ethNetMask 1.3.6.1.4.1.8691.2.13.1.3.2.3 ipaddress read-write
A subnet mask represents all of the network hosts at one geographic location, in one building, or on the same local area network. When a packet is sent out over the network, the NPort W2x50A series device server will use the subnet mask to check whether the TCP/IP host specified in the packet is on the local network segment. If the address is on the same network segment as the NPort W2x50A series device server, a connection is established directly from the NPort W2x50A series device server. Otherwise, the connection is established through the given default gateway.
                                 ethDefaultGateway 1.3.6.1.4.1.8691.2.13.1.3.2.4 ipaddress read-write
A gateway is a network computer that acts as an entrance to another network. Usually, the computers that control traffic within the network or at the local Internet service provider are gateway nodes. The NPort W2x50A series device server needs to know the IP address of the default gateway computer in order to communicate with the hosts outside the local network environment. For correct gateway IP address information, consult with the network administrator.
                                 ethBridgeMode 1.3.6.1.4.1.8691.2.13.1.3.2.5 integer read-write
Enable or disable the bridge function. Enumeration: 'enable': 1, 'disable': 0.
                             wlanSetting 1.3.6.1.4.1.8691.2.13.1.3.3
                                 wlanIpConfiguration 1.3.6.1.4.1.8691.2.13.1.3.3.1 integer read-write
The IP configuration mode of the NPort. You can choose from four possible IP configuration modes: Static, DHCP, DHCP/BOOTP, BOOTP. Enumeration: 'dhcp': 1, 'static': 0, 'bootp': 2.
                                 wlanIpAddress 1.3.6.1.4.1.8691.2.13.1.3.3.2 ipaddress read-write
An IP address is a number assigned to a network device (such as a computer) as a permanent address on the network. Computers use the IP address to identify and talk to each other over the network. Choose a proper IP address that is unique and valid in your network environment.
                                 wlanNetMask 1.3.6.1.4.1.8691.2.13.1.3.3.3 ipaddress read-write
A subnet mask represents all of the network hosts at one geographic location, in one building, or on the same local area network. When a packet is sent out over the network, the NPort W2x50A series device server will use the subnet mask to check whether the TCP/IP host specified in the packet is on the local network segment. If the address is on the same network segment as the NPort W2x50A series device server, a connection is established directly from the NPort W2x50A series device server. Otherwise, the connection is established through the given default gateway.
                                 wlanDefaultGateway 1.3.6.1.4.1.8691.2.13.1.3.3.4 ipaddress read-write
A gateway is a network computer that acts as an entrance to another network. Usually, the computers that control traffic within the network or at the local Internet service provider are gateway nodes. The NPort W2x50A series device server needs to know the IP address of the default gateway computer in order to communicate with the hosts outside the local network environment. For correct gateway IP address information, consult with the network administrator.
                             profileSetting 1.3.6.1.4.1.8691.2.13.1.3.4
                                 networkType 1.3.6.1.4.1.8691.2.13.1.3.4.1 integer read-write
Select WLAN network type. Enumeration: 'ad-hoc': 0, 'infrastructure': 1.
                                 adhocProfile 1.3.6.1.4.1.8691.2.13.1.3.4.2
                                     adhocGeneralSetting 1.3.6.1.4.1.8691.2.13.1.3.4.2.1
                                         adhocProfileName 1.3.6.1.4.1.8691.2.13.1.3.4.2.1.1 displaystring read-write
Assign profile name.
                                         adhocRFType 1.3.6.1.4.1.8691.2.13.1.3.4.2.1.2 integer read-write
Select WLAN network type. Enumeration: 'w802_11b_g': 2.
                                         adhocWlanSSID 1.3.6.1.4.1.8691.2.13.1.3.4.2.1.3 displaystring read-write
Set WLAN SSID
                                         adhocChannel 1.3.6.1.4.1.8691.2.13.1.3.4.2.1.4 integer read-write
Display currently used channel. When in Ad-Hoc mode, this value can be set. mode region possible channel ====================================== 802.11b_g : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13
                                     adhocSecuritySetting 1.3.6.1.4.1.8691.2.13.1.3.4.2.2
                                         adhocAuthentication 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.1 integer read-only
Wireless LAN autentication type. Enumeration: 'open-system': 0.
                                         adhocEncryption 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.2 integer read-write
Set encryption type. Enumeration: 'wep': 1, 'disable': 0.
                                         adhocWepKeyLength 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.3 integer read-write
WEP key length. Enumeration: 'key-128-bits': 1, 'key-64-bits': 0.
                                         adhocWepKeyIndex 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.4 integer read-write
WEP key index 1~4.
                                         adhocWepKeyPassphrase 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.5 displaystring read-write
WEP key passphrase.
                                         adhocWepKeyFormat 1.3.6.1.4.1.8691.2.13.1.3.4.2.2.6 integer read-write
WEP key format. Enumeration: 'hex': 1, 'ascii': 0.
                                 infrastructureProfile 1.3.6.1.4.1.8691.2.13.1.3.4.3
                                     infraGeneralSetting 1.3.6.1.4.1.8691.2.13.1.3.4.3.1
                                         infraGeneralSettingTable 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1 no-access
WLAN profile general setting table.
                                             infraGeneralSettingEntry 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1.1 no-access
WLAN profile general setting entry.
                                                 profileIndex 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1.1.1 integer read-only
The profile index Enumeration: 'profile1': 1.
                                                 profileName 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1.1.2 displaystring read-write
Assign profile name.
                                                 profileRFType 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1.1.3 integer read-write
Select WLAN network type. Enumeration: 'auto': 0, 'w802_11b_g': 2, 'w802_11a_n': 3, 'w802_11a': 1, 'w802_11b_g_n': 4.
                                                 profileWlanSSID 1.3.6.1.4.1.8691.2.13.1.3.4.3.1.1.1.4 displaystring read-write
Set WLAN SSID
                                     securitySetting 1.3.6.1.4.1.8691.2.13.1.3.4.3.2
                                         securitySettingTable 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1 no-access
WLAN profile security setting table.
                                             securitySettingEntry 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1 no-access
WLAN profile security setting entry.
                                                 authentication 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.1 integer read-write
Wireless LAN autentication type. Enumeration: 'wpa-psk': 3, 'wpa2': 4, 'shared-key': 1, 'open-system': 0, 'wpa2-psk': 5, 'wpa': 2.
                                                 encryption 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.2 integer read-write
Set encryption type. Selection rule is as following. authentication selectable encryption ============== ===================== open-system(0) disable(0), wep(1) shared-key(1) wep(1) wpa(2), wpa-psk(3) tkip(2), aes-ccmp(3) wpa2(4), wpa2-psk(5) tkip(2), aes-ccmp(3) Enumeration: 'tkip': 2, 'wep': 1, 'disable': 0, 'aes-ccmp': 3.
                                                 wepKeyLength 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.3 integer read-write
WEP key length. Enumeration: 'key-128-bits': 1, 'key-64-bits': 0.
                                                 wepKeyIndex 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.4 integer read-write
WEP key index 1~4.
                                                 wepKeyPassphrase 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.5 displaystring read-write
WEP key passphrase.
                                                 wepKeyFormat 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.6 integer read-write
WEP key format. Enumeration: 'hex': 1, 'ascii': 0.
                                                 eapMethod 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.12 integer read-write
EAP method for WPA and WPA2 authentication. Enumeration: 'tls': 0, 'leap': 3, 'ttls': 2, 'peap': 1.
                                                 tunneledAuth 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.13 integer read-write
Set tunneled authentication protocol when PEAP/TTLS is selected as EAP method. EAP method selectable tunneled authentication ========== ================================== peap(1) gtc(0), md5(1), mschapv2(5) ttls(2) pap(2), chap(3), mschap(4), mschapv2(5), eap-mschapv2(8), eap-gtc(9), eap-md5(10) Enumeration: 'pap': 2, 'tls': 6, 'mschapv2': 5, 'gtc': 0, 'eap-tls': 7, 'eap-mschapv2': 8, 'eap-md5': 10, 'mschap': 4, 'chap': 3, 'eap-gtc': 9, 'md5': 1.
                                                 wpaUsername 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.14 displaystring read-write
WPA username for WPA and WPA2 authentication.
                                                 wpaAnonymousUsername 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.16 displaystring read-write
Anonymous username needed when TTLS is selected as EAP method.
                                                 verifyServerCert 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.17 integer read-write
The setting of verify server certificate. Enumeration: 'enable': 1, 'disable': 0.
                                                 trustedServerCert 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.18 integer read-only
Display whether or not trusted server certificate is installed. Enumeration: 'installed': 1, 'not-installed': 0.
                                                 userCert 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.19 integer read-only
Display whether or not user certificate is installed. Enumeration: 'installed': 1, 'not-installed': 0.
                                                 userPrivateKey 1.3.6.1.4.1.8691.2.13.1.3.4.3.2.1.1.20 integer read-only
Display whether or not user private key is installed. Enumeration: 'installed': 1, 'not-installed': 0.
                                     fastRoamingSetting 1.3.6.1.4.1.8691.2.13.1.3.4.3.3 integer read-write
The setting of fast roaming. Enumeration: 'enable': 1, 'disable': 0.
                                     fastRoamingScanChannels1 1.3.6.1.4.1.8691.2.13.1.3.4.3.4 integer read-write
The scan channels of fast roaming. 0 represents 'N/A' ====================================================== Auot channel : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11a, 802.11a_n : 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11b_g, 802.11b_g_n : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13 Enumeration: 'channel_52': 19, 'channel_56': 20, 'channel_128': 30, 'channel_165': 38, 'channel_108': 25, 'channel_104': 24, 'n_a': 0, 'channel_100': 23, 'channel_5': 5, 'channel_4': 4, 'channel_7': 7, 'channel_6': 6, 'channel_1': 1, 'channel_3': 3, 'channel_2': 2, 'channel_161': 37, 'channel_149': 34, 'channel_9': 9, 'channel_8': 8, 'channel_64': 22, 'channel_124': 29, 'channel_40': 16, 'channel_60': 21, 'channel_44': 17, 'channel_48': 18, 'channel_140': 33, 'channel_120': 28, 'channel_112': 26, 'channel_116': 27, 'channel_136': 32, 'channel_132': 31, 'channel_157': 36, 'channel_153': 35, 'channel_36': 15, 'channel_11': 11, 'channel_10': 10, 'channel_13': 13, 'channel_12': 12.
                                     fastRoamingScanChannels2 1.3.6.1.4.1.8691.2.13.1.3.4.3.5 integer read-write
The scan channels of fast roaming. 0 represents 'N/A' ====================================================== Auot channel : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11a, 802.11a_n : 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11b_g, 802.11b_g_n : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13 Enumeration: 'channel_52': 19, 'channel_56': 20, 'channel_128': 30, 'channel_165': 38, 'channel_108': 25, 'channel_104': 24, 'n_a': 0, 'channel_100': 23, 'channel_5': 5, 'channel_4': 4, 'channel_7': 7, 'channel_6': 6, 'channel_1': 1, 'channel_3': 3, 'channel_2': 2, 'channel_161': 37, 'channel_149': 34, 'channel_9': 9, 'channel_8': 8, 'channel_64': 22, 'channel_124': 29, 'channel_40': 16, 'channel_60': 21, 'channel_44': 17, 'channel_48': 18, 'channel_140': 33, 'channel_120': 28, 'channel_112': 26, 'channel_116': 27, 'channel_136': 32, 'channel_132': 31, 'channel_157': 36, 'channel_153': 35, 'channel_36': 15, 'channel_11': 11, 'channel_10': 10, 'channel_13': 13, 'channel_12': 12.
                                     fastRoamingScanChannels3 1.3.6.1.4.1.8691.2.13.1.3.4.3.6 integer read-write
The scan channels of fast roaming. 0 represents 'N/A' ====================================================== Auot channel : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11a, 802.11a_n : 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 802.11b_g, 802.11b_g_n : 1, 2, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13 Enumeration: 'channel_52': 19, 'channel_56': 20, 'channel_128': 30, 'channel_165': 38, 'channel_108': 25, 'channel_104': 24, 'n_a': 0, 'channel_100': 23, 'channel_5': 5, 'channel_4': 4, 'channel_7': 7, 'channel_6': 6, 'channel_1': 1, 'channel_3': 3, 'channel_2': 2, 'channel_161': 37, 'channel_149': 34, 'channel_9': 9, 'channel_8': 8, 'channel_64': 22, 'channel_124': 29, 'channel_40': 16, 'channel_60': 21, 'channel_44': 17, 'channel_48': 18, 'channel_140': 33, 'channel_120': 28, 'channel_112': 26, 'channel_116': 27, 'channel_136': 32, 'channel_132': 31, 'channel_157': 36, 'channel_153': 35, 'channel_36': 15, 'channel_11': 11, 'channel_10': 10, 'channel_13': 13, 'channel_12': 12.
                                     fastRoamingThreshold 1.3.6.1.4.1.8691.2.13.1.3.4.3.7 integer read-write
Roaming threshold of fast roaming
                                     fastRoamingDifference 1.3.6.1.4.1.8691.2.13.1.3.4.3.8 integer read-write
Roaming difference of fast roaming
                             wlanLogSetting 1.3.6.1.4.1.8691.2.13.1.3.5
                                 wlanLogEnable 1.3.6.1.4.1.8691.2.13.1.3.5.1 integer read-write
Enable or disable WLAN log Enumeration: 'enable': 1, 'disable': 0.
                             advancedSetting 1.3.6.1.4.1.8691.2.13.1.3.6
                                 gratuitousArp 1.3.6.1.4.1.8691.2.13.1.3.6.1 integer read-write
Enable or disable the gratuitous ARP function. For some applications, users need the NPort W2x50A series device server to send broadcast packets to update the ARP table on the server. If the customer enables this function and sets the send period, the NPort W2x50A series device server will send broadcast packets periodically. Enumeration: 'enable': 1, 'disable': 0.
                                 gratuitousArpSendPeriod 1.3.6.1.4.1.8691.2.13.1.3.6.2 integer read-write
The send period of the gratuitous ARP function. Range: 10 ~ 1000 sec.
                                 gratuitousArpIpAddress1 1.3.6.1.4.1.8691.2.13.1.3.6.3 displaystring read-write
The IP address of the static gratuitous ARP.
                                 gratuitousArpMacAddress1 1.3.6.1.4.1.8691.2.13.1.3.6.4 displaystring read-write
The MAC address of the static gratuitous ARP.
                                 gratuitousArpIpAddress2 1.3.6.1.4.1.8691.2.13.1.3.6.5 displaystring read-write
The IP address of the static gratuitous ARP.
                                 gratuitousArpMacAddress2 1.3.6.1.4.1.8691.2.13.1.3.6.6 displaystring read-write
The MAC address of the static gratuitous ARP.
                                 gratuitousArpIpAddress3 1.3.6.1.4.1.8691.2.13.1.3.6.7 displaystring read-write
The IP address of the static gratuitous ARP.
                                 gratuitousArpMacAddress3 1.3.6.1.4.1.8691.2.13.1.3.6.8 displaystring read-write
The MAC address of the static gratuitous ARP.
                                 gratuitousArpIpAddress4 1.3.6.1.4.1.8691.2.13.1.3.6.9 displaystring read-write
The IP address of the static gratuitous ARP.
                                 gratuitousArpMacAddress4 1.3.6.1.4.1.8691.2.13.1.3.6.10 displaystring read-write
The MAC address of the static gratuitous ARP.
                         portSetting 1.3.6.1.4.1.8691.2.13.1.4
                             opModeSetting 1.3.6.1.4.1.8691.2.13.1.4.1
                                 opMode 1.3.6.1.4.1.8691.2.13.1.4.1.1
                                     opModePortTable 1.3.6.1.4.1.8691.2.13.1.4.1.1.1 no-access
The serial ports' operation mode table.
                                         opModePortEntry 1.3.6.1.4.1.8691.2.13.1.4.1.1.1.1 no-access
The serial port's operation mode entry.
                                             portIndex 1.3.6.1.4.1.8691.2.13.1.4.1.1.1.1.1 integer read-only
The serial port index.
                                             portMode 1.3.6.1.4.1.8691.2.13.1.4.1.1.1.1.2 integer read-write
The operation mode of the serial port. Note that changing this setting may also change the application. Enumeration: 'ethernet-modem': 12, 'tcp-Client': 13, 'pair-connection-slave': 0, 'real-Com': 2, 'tcp-Server': 10, 'udp': 14, 'disable': 7, 'rfc-2217': 20, 'pair-connection-master': 1, 'reverse-Terminal': 21.
                                 opModeParam 1.3.6.1.4.1.8691.2.13.1.4.1.2
                                     realCOM 1.3.6.1.4.1.8691.2.13.1.4.1.2.1
                                         realCOMTable 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1 no-access
The Real COM mode table.
                                             realCOMEntry 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1 no-access
The Real COM mode entry.
                                                 realCOMTcpAliveCheck 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort W2x50A series device server starts listening for another Real COM driver Connection.
                                                 realCOMMaxConnection 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.2 integer read-write
Max connection is usually used when the user needs to receive data from different hosts simultaneously. The factory default is 1. In this case, only one specific host can access this port of the NPort W2x50A series device server, and the Real COM driver on that host will have full control over the port. Max. connection = 1: Allows only a single host's Real COM driver to open the specific NPort W2x50A series device server's serial port. Max connection = 2 to 8: Allows 2 to 8 hosts' Real COM drivers to open the specific NPort W2x50A series device server's serial port, at the same time. When multiple hosts' Real COM drivers open the serial port at the same time, the COM driver only provides a pure data tunnel without control ability. The serial port parameter will use the firmware settings instead of getting the settings from your application program (AP).
                                                 realCOMIgnoreJammedIp 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.3 integer read-write
Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped responding, the serial device would wait until the data had been transmitted successfully before transmitting the second group of data to all hosts. Currently, if you select Yes for 'Ignore jammed IP,' the host that is not responding will be ignored, but the data will still be transmitted to the other hosts. Enumeration: 'enable': 1, 'disable': 0.
                                                 realCOMAllowDriverControl 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.4 integer read-write
If Max connection is greater than 1, NPort will ignore driver control commands from all connected hosts. However, if you set Allow driver control to YES, control commands will be accepted. Note that since the NPort W2x50A series device server may get configuration changes from multiple hosts, the most recent command received will take precedence. Enumeration: 'enable': 1, 'disable': 0.
                                                 realCOMConnectionDownRTS 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.5 integer read-write
For some applications, serial devices must obtain the Ethernet link status by reading the RTS signal from the NPort W2x50A series device server. If this setting is set to 'always low,' RTS will change its state to low if the Ethernet link is off. Enumeration: 'always-low': 1, 'always-high': 0.
                                                 realCOMConnectionDownDTR 1.3.6.1.4.1.8691.2.13.1.4.1.2.1.1.1.6 integer read-write
For some applications, serial devices must obtain the Ethernet link status by reading the DTR signal from the NPort W2x50A series device server. If this setting is set to 'always low,' DTR will change its state to low if the Ethernet link is off. Enumeration: 'always-low': 1, 'always-high': 0.
                                     rfc2217 1.3.6.1.4.1.8691.2.13.1.4.1.2.2
                                         rfc2217Table 1.3.6.1.4.1.8691.2.13.1.4.1.2.2.1 no-access
The RFC2217 mode table.
                                             rfc2217Entry 1.3.6.1.4.1.8691.2.13.1.4.1.2.2.1.1 no-access
The RFC2217 mode entry.
                                                 rfc2217TcpAliveCheck 1.3.6.1.4.1.8691.2.13.1.4.1.2.2.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort W2x50A series device server starts listening for another TCP Connection.
                                                 rfc2217TcpPort 1.3.6.1.4.1.8691.2.13.1.4.1.2.2.1.1.2 integer read-write
TCP server port of RFC2217.
                                     tcpServer 1.3.6.1.4.1.8691.2.13.1.4.1.2.3
                                         tcpServerTable 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1 no-access
The TCP server mode table.
                                             tcpServerEntry 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1 no-access
The TCP server mode entry.
                                                 tcpServerTcpAliveCheck 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort W2x50A series device server starts listening for another TCP Connection.
                                                 tcpServerInactivityTime 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.2 integer read-write
0 ms: TCP connection is not closed when the serial line is idle. 1-65535 ms: The NPort W2x50A series device server automatically closes the TCP connection if there is no serial data activity for the given time. After the connection is closed, the NPort W2x50A series device server starts listening for another TCP connection.
                                                 tcpServerMaxConnection 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.3 integer read-write
Max connection is usually used when the user needs to receive data from different hosts simultaneously. The factory default is 1. In this case, only one specific host can access this port of the NPort W2x50A series device server, and the TCP server driver on that host will have full control over the port. Max. connection 1: Allows only a single host's to connect specific NPort W2x50A series device Max connection 2 to 8: Allows 2 to 8 hosts' to conncect NPort W2x50A series device at the same time.
                                                 tcpServerIgnoreJammedIp 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.4 integer read-write
Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped responding, the serial device would wait until the data had been transmitted successfully before transmitting the second group of data to all hosts. Currently, if you select Yes for 'Ignore jammed IP,' the host that is not responding will be ignored, but the data will still be transmitted to the other hosts. Enumeration: 'enable': 1, 'disable': 0.
                                                 tcpServerAllowDriverControl 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.5 integer read-write
If Max connection is greater than 1, NPort will ignore driver control commands from all connected hosts. However, if you set Allow driver control to YES, control commands will be accepted. Note that since the NPort W2x50A series device server may get configuration changes from multiple hosts, the most recent command received will take precedence. Enumeration: 'enable': 1, 'disable': 0.
                                                 tcpServerTcpPort 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.6 integer read-write
The 'TCP port' is the TCP port that the NPort W2x50A series device server uses to listen to connections, and that other devices must use to contact the NPort W2x50A series device server.
                                                 tcpServerCmdPort 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.7 integer read-write
The 'Command port' is a TCP port used to listen for SSDK commands from the host. In order to prevent a TCP port conflict with other applications, the user can set the Command port to another port if needed.
                                                 tcpServerConnectionDownRTS 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.8 integer read-write
For some applications, serial devices must obtain the Ethernet link status from the RTS signal sent by the NPort W2x50A series device server. If this setting is set to 'goes low,' RTS will change the state to low if the Ethernet link is off. Enumeration: 'always-low': 1, 'always-high': 0.
                                                 tcpServerConnectionDownDTR 1.3.6.1.4.1.8691.2.13.1.4.1.2.3.1.1.9 integer read-write
For some applications, serial devices must obtain the Ethernet link status from the DTR signal sent by the NPort W2x50A series device server. If this setting is set to 'goes low,' DTR will change the state to low if the Ethernet link is off. Enumeration: 'always-low': 1, 'always-high': 0.
                                     tcpClient 1.3.6.1.4.1.8691.2.13.1.4.1.2.4
                                         tcpClientTable 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1 no-access
The TCP client mode table.
                                             tcpClientEntry 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1 no-access
The TCP client mode entry.
                                                 tcpClientTcpAliveCheck 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device client automatically closes the TCP connection if there is no TCP activity for the given time.
                                                 tcpClientInactivityTime 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.2 integer read-write
0 ms: TCP connection is not closed when the serial line is idle. 1-65535 ms: The NPort W2x50A series device client automatically closes the TCP connection if there is no serial data activity for the given time.
                                                 tcpClientIgnoreJammedIp 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.3 integer read-write
Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped responding, the serial device would wait until the data had been transmitted successfully before transmitting the second group of data to all hosts. Currently, if you select Yes for 'Ignore jammed IP,' the host that is not responding will be ignored, but the data will still be transmitted to the other hosts. Enumeration: 'enable': 1, 'disable': 0.
                                                 tcpClientDestinationAddress1 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.4 displaystring read-write
The NPort W2x50A series device server can connect actively to a remote host that has this IP address.
                                                 tcpClientDestinationPort1 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.5 integer read-write
The NPort W2x50A series device server can connect actively to a remote host that has this TCP port number.
                                                 tcpClientDestinationAddress2 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.6 displaystring read-write
The NPort W2x50A series device server can connect actively to a remote host that has this IP address.
                                                 tcpClientDestinationPort2 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.7 integer read-write
The NPort W2x50A series device server can connect actively to a remote host that has this TCP port number.
                                                 tcpClientDestinationAddress3 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.8 displaystring read-write
The NPort W2x50A series device server can connect actively to a remote host that has this IP address.
                                                 tcpClientDestinationPort3 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.9 integer read-write
The NPort W2x50A series device server can connect actively to a remote host that has this port number.
                                                 tcpClientDestinationAddress4 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.10 displaystring read-write
The NPort W2x50A series device server can connect actively to a remote host that has this IP address.
                                                 tcpClientDestinationPort4 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.11 integer read-write
The NPort W2x50A series device server can connect actively to a remote host that has this port number.
                                                 tcpClientDesignatedLocalPort1 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.12 integer read-write
The local TCP port used to connect actively to the remote host.
                                                 tcpClientDesignatedLocalPort2 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.13 integer read-write
The local TCP port used to connect actively to the remote host.
                                                 tcpClientDesignatedLocalPort3 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.14 integer read-write
The local TCP port used to connect actively to the remote host.
                                                 tcpClientDesignatedLocalPort4 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.15 integer read-write
The local TCP port used to connect actively to the remote host.
                                                 tcpClientConnectionControl 1.3.6.1.4.1.8691.2.13.1.4.1.2.4.1.1.16 integer read-write
Events that cause the TCP client to drop the connection. Enumeration: 'dcdOn-None': 264, 'dsrOn-None': 260, 'dcdOn-DCD-Off': 2056, 'anyCharacter-None': 258, 'anyCharacter-InactivityTime': 514, 'dsrOn-DSR-Off': 1028, 'startup-None': 257.
                                     udp 1.3.6.1.4.1.8691.2.13.1.4.1.2.5
                                         udpTable 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1 no-access
The UDP mode table.
                                             udpEntry 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1 no-access
The UDP mode entry.
                                                 udpDestinationAddress1Begin 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.1 ipaddress read-write
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinationAddress1End.
                                                 udpDestinationAddress1End 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.2 ipaddress read-write
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between udpDestinationAddress1Begin and this parameter.
                                                 udpDestinationPort1 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.3 integer read-write
The NPort W2x50A series device server can actively send UDP packets to remote hosts that have this UDP port number.
                                                 udpDestinationAddress2Begin 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.4 ipaddress read-write
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinationAddress2End.
                                                 udpDestinationAddress2End 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.5 ipaddress read-write
The NPort W2x50A series device server can actively send UDP packets to the remote hosts whose IP addresses are in the range between udpDestinationAddress2Begin and this parameter.
                                                 udpDestinationPort2 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.6 integer read-write
The NPort W2x50A series device server can actively send UDP packets to the remote hosts that have this UDP port number.
                                                 udpDestinationAddress3Begin 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.7 ipaddress read-write
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinationAddress3End.
                                                 udpDestinationAddress3End 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.8 ipaddress read-write
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between udpDestinationAddress3Begin and this parameter.
                                                 udpDestinationPort3 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.9 integer read-write
The NPort W2x50A series device server can actively send UDP packets to remote hosts that have this UDP port number.
                                                 udpDestinationAddress4Begin 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.10 ipaddress read-write
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and udpDestinationAddress4End.
                                                 udpDestinationAddress4End 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.11 ipaddress read-write
The NPort W2x50A series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between udpDestinationAddress4Begin and this parameter.
                                                 udpDestinationPort4 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.12 integer read-write
The NPort W2x50A series device server can actively send UDP packets to remote hosts that have this UDP port number.
                                                 udpLocalListenPort 1.3.6.1.4.1.8691.2.13.1.4.1.2.5.1.1.13 integer read-write
The UDP port that the NPort W2x50A series device server listens to and that other devices must use to contact the NPort W2x50A series device server.
                                     pairConnectionMaster 1.3.6.1.4.1.8691.2.13.1.4.1.2.6
                                         pairConnectionMasterTable 1.3.6.1.4.1.8691.2.13.1.4.1.2.6.1 no-access
The pair connection master mode table.
                                             pairConnectionMasterEntry 1.3.6.1.4.1.8691.2.13.1.4.1.2.6.1.1 no-access
The pair connection master mode entry.
                                                 pairConnectionMasterTcpAliveCheck 1.3.6.1.4.1.8691.2.13.1.4.1.2.6.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort W2x50A series device server starts connecting again.
                                                 pairConnectionMasterDestnationAddress 1.3.6.1.4.1.8691.2.13.1.4.1.2.6.1.1.2 displaystring read-write
IP address of pair connection slave.
                                                 pairConnectionMasterDestnationTcpPort 1.3.6.1.4.1.8691.2.13.1.4.1.2.6.1.1.3 integer read-write
TCP port of pair connection slave.
                                     pairConnectionSlave 1.3.6.1.4.1.8691.2.13.1.4.1.2.7
                                         pairConnectionSlaveTable 1.3.6.1.4.1.8691.2.13.1.4.1.2.7.1 no-access
The pair connection slave mode table.
                                             pairConnectionSlaveEntry 1.3.6.1.4.1.8691.2.13.1.4.1.2.7.1.1 no-access
The pair connection slave mode entry.
                                                 pairConnectionSlaveTcpAliveCheck 1.3.6.1.4.1.8691.2.13.1.4.1.2.7.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort W2x50A series device server starts listening for another TCP Connection.
                                                 pairConnectionSlaveLocalTcpPort 1.3.6.1.4.1.8691.2.13.1.4.1.2.7.1.1.2 integer read-write
TCP server port of pair connection slave.
                                     ethernetModem 1.3.6.1.4.1.8691.2.13.1.4.1.2.8
                                         ethernetModemTable 1.3.6.1.4.1.8691.2.13.1.4.1.2.8.1 no-access
The ethernet modem mode table.
                                             ethernetModemEntry 1.3.6.1.4.1.8691.2.13.1.4.1.2.8.1.1 no-access
The ethernet modem mode entry.
                                                 ethernetModemTcpAliveCheck 1.3.6.1.4.1.8691.2.13.1.4.1.2.8.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time.
                                                 ethernetModemLocalTcpPort 1.3.6.1.4.1.8691.2.13.1.4.1.2.8.1.1.2 integer read-write
TCP server port of ethernet modem.
                                     reverseTerminal 1.3.6.1.4.1.8691.2.13.1.4.1.2.9
                                         reverseTerminalTable 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1 no-access
The reverse terminal mode table.
                                             reverseTerminalEntry 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1 no-access
The reverse terminal mode entry.
                                                 reverseTerminalTcpAliveCheck 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no TCP activity for the given time.
                                                 reverseTerminalInactivityTime 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1.2 integer read-write
0 min: TCP connection is not closed when the serial line is idle. 0-99 min: The NPort W2x50A series device server automatically closes the TCP connection if there is no serial data activity for the given time. After the connection is closed, the NPort W2x50P series device server starts listening for another TCP connection.
                                                 reverseTerminalTcpPort 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1.3 integer read-write
Each of the NPort W2x50A series device server's serial ports are mapped to a TCP port.
                                                 reverseTerminalAuthenticationType 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1.4 integer read-write
The reverse terminal authentication type. Enumeration: 'radius': 2, 'none': 0, 'local': 1.
                                                 reverseTerminalMapKeys 1.3.6.1.4.1.8691.2.13.1.4.1.2.9.1.1.5 integer read-write
If data received through NPort W2x50A series device server's Ethernet port is sent using the 'enter' command, the data will be transmitted out through the serial port with an added 1. 'carriage return + line feed' if you select the 'cr-lf' option (i.e., the cursor will jump to the next line, and return to the first character of the line) 2. 'carriage return' if you select the 'cr' option (i.e., the cursor will return to the first character of the line 3. 'line feed' if you select the 'lf' option. (i.e., the cursor will jump to the next line, but not move horizontally) Enumeration: 'lf': 2, 'cr': 1, 'cr-lf': 0.
                                 dataPacking 1.3.6.1.4.1.8691.2.13.1.4.1.3
                                     dataPackingPortTable 1.3.6.1.4.1.8691.2.13.1.4.1.3.1 no-access
The Data Packing table.
                                         dataPackingPortEntry 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1 no-access
The Data Packing entry.
                                             portPacketLength 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.1 integer read-write
If the value is 0, the Delimiter Process will be used, regardless of the length of the data packet. If the data length (in bytes) matches the configured value, the data will be forced out. The data length can be configured from 0 to 1024 bytes. Set to 0 if you do not need to limit the length.
                                             portDelimiter1Enable 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.2 integer read-write
Enable the first delimiter character. Enumeration: 'enable': 1, 'disable': 0.
                                             portDelimiter1 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.3 displaystring read-write
The first delimiter character, in hex decimal.
                                             portDelimiter2Enable 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.4 integer read-write
Enable the second delimiter character. Enumeration: 'enable': 1, 'disable': 0.
                                             portDelimiter2 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.5 displaystring read-write
The second delimiter character, in hex decimal.
                                             portDelimiterProcess 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.6 integer read-write
'delimiterAddOne' or 'delimiterAddTwo': The data will be transmitted when an additional byte (for 'delimiterAddOne'), or an additional 2 bytes (for 'delimiterAddTwo') of data is received after receiving the Delimiter. 'stripDelimiter': When the delimiter is received, the Delimiter is deleted (i.e., stripped), and the remaining data is transmitted. 'doNothing': The data will be transmitted when the delimiter is received. Enumeration: 'delimiterAddTwo': 4, 'stripDelimiter': 8, 'doNothing': 1, 'delimiterAddOne': 2.
                                             portForceTransmit 1.3.6.1.4.1.8691.2.13.1.4.1.3.1.1.7 integer read-write
0: Disable the force transmit timeout. 1 to 65535: Forces the NPort W2x50A series device server's TCP/IP protocol software to try to pack serial data received during the specified time into the same data frame.
                             comParamSetting 1.3.6.1.4.1.8691.2.13.1.4.2
                                 comParamPortTable 1.3.6.1.4.1.8691.2.13.1.4.2.1 no-access
The Communication Parameters table.
                                     comParamPortEntry 1.3.6.1.4.1.8691.2.13.1.4.2.1.1 no-access
The Communication Parameters entry.
                                         portAlias 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.1 displaystring read-write
Port alias is included to allow easy identification of the serial devices that are connected to NPort W2x50A series device server's serial port.
                                         portInterface 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.2 integer read-write
The serial interface that the port works on. Enumeration: 'rs-422': 1, 'rs-232': 0, 'rs-485-2wire': 2, 'rs-485-4wire': 3.
                                         portBaudRate 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.3 integer read-write
The port's speed in bits per second. You can choose a standard baud rate by indexing. Enumeration: 'b1800': 8, 'b150': 4, 'b75': 1, 'b9600': 12, 'b110': 2, 'b50': 0, 'b2400': 9, 'b38400': 14, 'b19200': 13, 'b134': 3, 'b460800': 18, 'b600': 6, 'b921600': 19, 'b115200': 16, 'b300': 5, 'b57600': 15, 'b4800': 10, 'b230400': 17, 'b1200': 7.
                                         portDataBits 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.4 integer read-write
The number of bits in a character for the port. Enumeration: 'bits-8': 3, 'bits-5': 0, 'bits-7': 2, 'bits-6': 1.
                                         portStopBits 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.5 integer read-write
The number of stop bits for the port. Enumeration: 'bits-1': 0, 'bits-2': 2, 'bits-1dot5': 1.
                                         portParity 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.6 integer read-write
The parity bit for the port. Enumeration: 'even': 3, 'none': 0, 'space': 7, 'odd': 1, 'mark': 5.
                                         portFlowControl 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.7 integer read-write
The flow-control method for the port. Enumeration: 'none': 0, 'xon-xoff': 2, 'rts-cts': 1.
                                         portFIFO 1.3.6.1.4.1.8691.2.13.1.4.2.1.1.8 integer read-write
Enable or disable the port's FIFO. Enumeration: 'enable': 1, 'disable': 0.
                             dataBuffering 1.3.6.1.4.1.8691.2.13.1.4.3
                                 dataBufferingPortTable 1.3.6.1.4.1.8691.2.13.1.4.3.1 no-access
The Data Buffering table.
                                     dataBufferingPortEntry 1.3.6.1.4.1.8691.2.13.1.4.3.1.1 no-access
The Data Buffering entry.
                                         portBufferingEnable 1.3.6.1.4.1.8691.2.13.1.4.3.1.1.1 integer read-write
Enable off-line port buffering. Enumeration: 'enable': 1, 'disable': 0.
                                         portSerialDataLoggingEnable 1.3.6.1.4.1.8691.2.13.1.4.3.1.1.2 integer read-write
Enable or disable serial data logging for the port. Enumeration: 'enable': 1, 'disable': 0.
                         sysManagement 1.3.6.1.4.1.8691.2.13.1.5
                             miscNetworkSettings 1.3.6.1.4.1.8691.2.13.1.5.1
                                 accessibleIp 1.3.6.1.4.1.8691.2.13.1.5.1.1
                                     enableAccessibleIpList 1.3.6.1.4.1.8691.2.13.1.5.1.1.1 integer read-write
Enable or disable the entire accessible IP list. Enumeration: 'enable': 1, 'disable': 0.
                                     accessibleIpListTable 1.3.6.1.4.1.8691.2.13.1.5.1.1.2 no-access
Accessible IP List table.
                                         accessibleIpListEntry 1.3.6.1.4.1.8691.2.13.1.5.1.1.2.1 no-access
Accessible IP List entry.
                                             accessibleIpListIndex 1.3.6.1.4.1.8691.2.13.1.5.1.1.2.1.1 integer read-only
Accessible IP List index.
                                             activeAccessibleIpList 1.3.6.1.4.1.8691.2.13.1.5.1.1.2.1.2 integer read-write
Enable or disable this accessible IP entry. Enumeration: 'enable': 1, 'disable': 0.
                                             accessibleIpListAddress 1.3.6.1.4.1.8691.2.13.1.5.1.1.2.1.3 ipaddress read-write
Accessible IP address. This value can be the IP address of a single host if the netmask is set to '255.255.255.255,' or it can be a network address.
                                             accessibleIpListNetmask 1.3.6.1.4.1.8691.2.13.1.5.1.1.2.1.4 ipaddress read-write
Accessible IP address netmask. The IP address and netmask are used to specify a group of remote hosts.
                                 snmpAgentSettings 1.3.6.1.4.1.8691.2.13.1.5.1.2
                                     snmpEnable 1.3.6.1.4.1.8691.2.13.1.5.1.2.1 integer read-write
Enable or disable SNMP agent. Enumeration: 'enable': 1, 'disable': 0.
                                     snmpContactName 1.3.6.1.4.1.8691.2.13.1.5.1.2.2 displaystring read-write
The SNMP contact information usually includes an emergency contact name and telephone or pager number.
                                     snmpLocation 1.3.6.1.4.1.8691.2.13.1.5.1.2.3 displaystring read-write
Specify the location string for SNMP agents, such as the NPort W2x50A series device server. This string is usually set to the street address where the NPort W2x50A series device server is physically located.
                                 authenticationServer 1.3.6.1.4.1.8691.2.13.1.5.1.4
                                     radiusServerIp 1.3.6.1.4.1.8691.2.13.1.5.1.4.1 displaystring read-write
The IP address or domain name of the RADIUS server.
                                     udpPortAuthenticationServer 1.3.6.1.4.1.8691.2.13.1.5.1.4.3 integer read-write
The UDP port of the RADIUS server. Enumeration: 'port1645': 1645, 'port1812': 1812.
                                     radiusAccounting 1.3.6.1.4.1.8691.2.13.1.5.1.4.4 integer read-write
Enable or disable RADIUS accounting. Enumeration: 'enable': 1, 'disable': 0.
                                 sysLogSettings 1.3.6.1.4.1.8691.2.13.1.5.1.5
                                     sysLocalLog 1.3.6.1.4.1.8691.2.13.1.5.1.5.1 integer read-write
System cold start, System warm start. Enumeration: 'enable': 1, 'disable': 0.
                                     networkLocalLog 1.3.6.1.4.1.8691.2.13.1.5.1.5.2 integer read-write
DHCP/BOOTP get IP/renew, mail fail, NTP connect fail, IP conflict, network link down. Enumeration: 'enable': 1, 'disable': 0.
                                     configLocalLog 1.3.6.1.4.1.8691.2.13.1.5.1.5.3 integer read-write
Login fail, IP changed, password changed, firmware upgrade, SSL certificate import, config export, wireless certificate import, serial data log export. Enumeration: 'enable': 1, 'disable': 0.
                                     opModeLocalLog 1.3.6.1.4.1.8691.2.13.1.5.1.5.4 integer read-write
Connect, Disconnect, Restart. Enumeration: 'enable': 1, 'disable': 0.
                             autoWarningSettings 1.3.6.1.4.1.8691.2.13.1.5.2
                                 eventSettings 1.3.6.1.4.1.8691.2.13.1.5.2.1
                                     mailWarningColdStart 1.3.6.1.4.1.8691.2.13.1.5.2.1.1 integer read-write
Refers to starting the system from power off (contrast this with warm start). When performing a cold start, the NPort W2x50A series device server will automatically issue an auto warning message by e-mail after booting up. Enumeration: 'enable': 1, 'disable': 0.
                                     mailWarningWarmStart 1.3.6.1.4.1.8691.2.13.1.5.2.1.2 integer read-write
Refers to restarting the NPort W2x50A without turning the power off. When performing a warm start, the NPort W2x50A series device server will automatically send an e-mail after rebooting. Enumeration: 'enable': 1, 'disable': 0.
                                     mailWarningAuthFailure 1.3.6.1.4.1.8691.2.13.1.5.2.1.3 integer read-write
The user inputs a wrong password from the Console or Administrator. When authentication failure occurs, the NPort W2x50A series device server will immediately send an e-mail. Enumeration: 'enable': 1, 'disable': 0.
                                     mailWarningIpChanged 1.3.6.1.4.1.8691.2.13.1.5.2.1.4 integer read-write
The user has changed the NPort W2x50A series device server's IP address. When the IP address changes,the NPort W2x50A series device server will send an e-mail with the new IP address before it reboots. If the NPort W2x50A series device server is unable to send an e-mail message to the mail server within 15 seconds, it will reboot anyway, and abort the e-mail auto warning. Enumeration: 'enable': 1, 'disable': 0.
                                     mailWarningPasswordChanged 1.3.6.1.4.1.8691.2.13.1.5.2.1.5 integer read-write
The user has changed the NPort W2x50A series device server's password. When the password changes, the NPort W2x50A series device server will send an e-mail with the password changed notice before it reboots. If the NPort W2x50A series device server is unable to send an e-mail message to the mail server within 15 seconds, it will reboot anyway, and abort the e-mail auto warning. Enumeration: 'enable': 1, 'disable': 0.
                                     trapServerColdStart 1.3.6.1.4.1.8691.2.13.1.5.2.1.6 integer read-write
Refers to starting the system from power off (contrast this with warm start). When performing a cold start, the NPort W2x50A series device server will automatically issue an auto warning message by sending an SNMP trap after booting up. Enumeration: 'enable': 1, 'disable': 0.
                                     trapServerWarmStart 1.3.6.1.4.1.8691.2.13.1.5.2.1.7 integer read-write
Refers to restarting the NPort W2x50A without turning the power off. When performing a warm start, the NPort W2x50A series device server will automatically send an SNMP trap after rebooting. Enumeration: 'enable': 1, 'disable': 0.
                                     trapServerAuthFailure 1.3.6.1.4.1.8691.2.13.1.5.2.1.8 integer read-write
The user inputs a wrong password from the Console or Administrator. When authentication failure occurs, the NPort W2x50A series device server will immediately send an SNMP trap. Enumeration: 'enable': 1, 'disable': 0.
                                 serialEventSettings 1.3.6.1.4.1.8691.2.13.1.5.2.2
                                     portEventSettingsTable 1.3.6.1.4.1.8691.2.13.1.5.2.2.1 no-access
Port Event Settings Table.
                                         portEventSettingsEntry 1.3.6.1.4.1.8691.2.13.1.5.2.2.1.1 no-access
Port Event Settings entry.
                                             mailDCDchange 1.3.6.1.4.1.8691.2.13.1.5.2.2.1.1.1 integer read-write
A change in the DCD (Data Carrier Detect) signal indicates that the modem connection status has changed. For example, if the DCD signal changes to low, it indicates that the connection line is down. When the DCD signal changes to low, the NPort W2x50A series device server will immediately send an e-mail message. Enumeration: 'enable': 1, 'disable': 0.
                                             trapDCDchange 1.3.6.1.4.1.8691.2.13.1.5.2.2.1.1.2 integer read-write
A change in the DCD (Data Carrier Detect) signal indicates that the modem connection status has changed. For example, if the DCD signal changes to low, it indicates that the connection line is down. When the DCD signal changes to low, the NPort W2x50A series device server will immediately send an SNMP trap. Enumeration: 'enable': 1, 'disable': 0.
                                             mailDSRchange 1.3.6.1.4.1.8691.2.13.1.5.2.2.1.1.3 integer read-write
A change in the DSR (Data Set Ready) signal indicates that the data communication equipment is powered off. For example, if the DSR signal changes to low, it indicates that the data communication equipment is powered down. When the DSR signal changes to low, the NPort W2x50A series device server will immediately send an e-mail message. Enumeration: 'enable': 1, 'disable': 0.
                                             trapDSRchange 1.3.6.1.4.1.8691.2.13.1.5.2.2.1.1.4 integer read-write
A change in the DSR (Data Set Ready) signal indicates that the data communication equipment is powered off. For example, if the DSR signal changes to low, it indicates that the data communication equipment is powered down. When the DSR signal changes to low, the NPort W2x50A series device server will immediately send an SNMP trap. Enumeration: 'enable': 1, 'disable': 0.
                                 emailAlert 1.3.6.1.4.1.8691.2.13.1.5.2.3
                                     emailWarningMailServer 1.3.6.1.4.1.8691.2.13.1.5.2.3.1 displaystring read-write
The e-mail server's IP address or domain name of the e-mail warning function.
                                     emailRequiresAuthentication 1.3.6.1.4.1.8691.2.13.1.5.2.3.2 integer read-write
Set if the mail server requires user login. Enumeration: 'require': 1, 'non-require': 0.
                                     emailWarningUserName 1.3.6.1.4.1.8691.2.13.1.5.2.3.3 displaystring read-write
The user name used to log into the mail server if authentication is required.
                                     emailWarningFromEmail 1.3.6.1.4.1.8691.2.13.1.5.2.3.5 displaystring read-write
The e-mail address to be filled in the 'From' field of the auto-warning e-mail.
                                     emailWarningFirstEmailAddr 1.3.6.1.4.1.8691.2.13.1.5.2.3.6 displaystring read-write
The first email address to where the auto-warning e-mail is to be sent.
                                     emailWarningSecondEmailAddr 1.3.6.1.4.1.8691.2.13.1.5.2.3.7 displaystring read-write
The second email address to where the auto-warning e-mail is to be sent.
                                     emailWarningThirdEmailAddr 1.3.6.1.4.1.8691.2.13.1.5.2.3.8 displaystring read-write
The third email address to where the auto-warning e-mail is to be sent.
                                     emailWarningFourthEmailAddr 1.3.6.1.4.1.8691.2.13.1.5.2.3.9 displaystring read-write
The fourth email address to where the auto-warning e-mail is to be sent.
                                 snmpTrap 1.3.6.1.4.1.8691.2.13.1.5.2.4
                                     snmpTrapReceiverIp 1.3.6.1.4.1.8691.2.13.1.5.2.4.1 displaystring read-write
SNMP trap server IP address or domain name.
                                     trapVersion 1.3.6.1.4.1.8691.2.13.1.5.2.4.2 integer read-write
SNMP trap version used for the auto-warning function. Enumeration: 'v2c': 1, 'v1': 0.
                             maintenance 1.3.6.1.4.1.8691.2.13.1.5.3
                                 consoleSettings 1.3.6.1.4.1.8691.2.13.1.5.3.1
                                     httpConsole 1.3.6.1.4.1.8691.2.13.1.5.3.1.1 integer read-write
Enable or disable HTTP console. Enumeration: 'enable': 1, 'disable': 0.
                                     httpsConsole 1.3.6.1.4.1.8691.2.13.1.5.3.1.2 integer read-write
Enable or disable HTTPS console. Enumeration: 'enable': 1, 'disable': 0.
                                     telnetConsole 1.3.6.1.4.1.8691.2.13.1.5.3.1.3 integer read-write
Enable or disable Telnet console. Enumeration: 'enable': 1, 'disable': 0.
                                     sshConsole 1.3.6.1.4.1.8691.2.13.1.5.3.1.4 integer read-write
Enable or disable SSH console. Enumeration: 'enable': 1, 'disable': 0.
                                     serialConsole 1.3.6.1.4.1.8691.2.13.1.5.3.1.5 integer read-write
Enable or disable Serial console. Enumeration: 'enable': 1, 'disable': 0.
                                     resetButton 1.3.6.1.4.1.8691.2.13.1.5.3.1.6 integer read-write
Reset button setting. Enumeration: 'Disable_after_60_sec': 0, 'Always_enable': 1.
                                 loadFactoryDefault 1.3.6.1.4.1.8691.2.13.1.5.3.2
                                     loadFactoryDefaultSetting 1.3.6.1.4.1.8691.2.13.1.5.3.2.1 integer read-write
This function will reset all of the NPort W2x50A series device server's settings to the factory default values. Be aware that previous settings will be lost. Selecting Reset to factory default (excluding IP configuration) will reset all settings except the IP configuration to factory defaults. Selecting Reset to factory default will reset all settings including the IP configuration to factory defaults. Enumeration: 'resetToFactoryDefault-ExcludingIpConfiguration': 0, 'resetToFactoryDefault': 1.
                         sysStatus 1.3.6.1.4.1.8691.2.13.1.6
                             s2eConnections 1.3.6.1.4.1.8691.2.13.1.6.1
                                 monitorRemoteIpTable 1.3.6.1.4.1.8691.2.13.1.6.1.1 no-access
Serial to Network Connections Remote IP table.
                                     monitorRemoteIpEntry 1.3.6.1.4.1.8691.2.13.1.6.1.1.1 no-access
Serial to Network Connections Remote IP entry.
                                         remoteIpIndex 1.3.6.1.4.1.8691.2.13.1.6.1.1.1.1 integer read-only
Serial to Network Connections Remote IP index.
                                         monitorRemoteIp 1.3.6.1.4.1.8691.2.13.1.6.1.1.1.2 ipaddress read-only
The remote IP currently connecting to this port.
                             serialPortStatus 1.3.6.1.4.1.8691.2.13.1.6.2
                                 monitorSerialPortStatusTable 1.3.6.1.4.1.8691.2.13.1.6.2.1 no-access
Serial Port Status table.
                                     monitorSerialPortStatusEntry 1.3.6.1.4.1.8691.2.13.1.6.2.1.1 no-access
Serial Port Status entry.
                                         monitorTxCount 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.1 integer read-only
View the number of bytes transmitted from the port since the last time the port was initialized.
                                         monitorRxCount 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.2 integer read-only
View the number of bytes received by the port since the last time the port was initialized.
                                         monitorTxTotalCount 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.3 integer read-only
View the number of bytes transmitted from the port since the last time the system was initialized.
                                         monitorRxTotalCount 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.4 integer read-only
View the number of bytes received by the port since the last time the system was initialized.
                                         monitorDSR 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.5 integer read-only
View the current DSR status of this port. Enumeration: 'on': 1, 'off': 0.
                                         monitorDTR 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.6 integer read-only
View the current DTR status of this port. Enumeration: 'on': 1, 'off': 0.
                                         monitorRTS 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.7 integer read-only
View the current RTS status of this port. Enumeration: 'on': 1, 'off': 0.
                                         monitorCTS 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.8 integer read-only
View the current CTS status of this port. Enumeration: 'on': 1, 'off': 0.
                                         monitorDCD 1.3.6.1.4.1.8691.2.13.1.6.2.1.1.9 integer read-only
View the current DCD status of this port. Enumeration: 'on': 1, 'off': 0.
                             serialPortErrorCount 1.3.6.1.4.1.8691.2.13.1.6.3
                                 monitorSerialPortErrorCountTable 1.3.6.1.4.1.8691.2.13.1.6.3.1 no-access
Serial Port Error Count table.
                                     monitorSerialPortErrorCountEntry 1.3.6.1.4.1.8691.2.13.1.6.3.1.1 no-access
Serial Port Error Count entry.
                                         monitorErrorCountFrame 1.3.6.1.4.1.8691.2.13.1.6.3.1.1.1 integer read-only
View the number of 'Frame' errors for this port.
                                         monitorErrorCountParity 1.3.6.1.4.1.8691.2.13.1.6.3.1.1.2 integer read-only
View the number of 'Parity' errors for this port.
                                         monitorErrorCountOverrun 1.3.6.1.4.1.8691.2.13.1.6.3.1.1.3 integer read-only
View the number of 'Overrun' errors for this port.
                                         monitorErrorCountBreak 1.3.6.1.4.1.8691.2.13.1.6.3.1.1.4 integer read-only
View the number of 'Break' errors for this port.
                             serialPortSettings 1.3.6.1.4.1.8691.2.13.1.6.4
                                 monitorSerialPortSettingsTable 1.3.6.1.4.1.8691.2.13.1.6.4.1 no-access
Serial Port Settings table.
                                     monitorSerialPortSettingsEntry 1.3.6.1.4.1.8691.2.13.1.6.4.1.1 no-access
Serial Port Settings entry.
                                         monitorBaudRate 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.1 integer read-only
View the current baudrate of the port.
                                         monitorDataBits 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.2 integer read-only
View the number of bits per byte for the port. Enumeration: 'bits-8': 8, 'bits-5': 5, 'bits-7': 7, 'bits-6': 6.
                                         monitorStopBits 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.3 displaystring read-only
View the number of stop bits for the port.
                                         monitorParity 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.4 integer read-only
View the parity bit for the port. Enumeration: 'even': 24, 'none': 0, 'space': 56, 'odd': 8, 'mark': 40.
                                         monitorRTSCTSFlowControl 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.5 integer read-only
View if the port is using RTS/CTS flow control. Enumeration: 'on': 1, 'off': 0.
                                         monitorXONXOFFFlowControl 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.6 integer read-only
View if the port is using XON/XOFF flow control. Enumeration: 'on': 1, 'off': 0.
                                         monitorFIFO 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.7 integer read-only
View FIFO status of this port. Enumeration: 'enable': 1, 'disable': 0.
                                         monitorInterface 1.3.6.1.4.1.8691.2.13.1.6.4.1.1.8 integer read-only
View the serial interface that the port is using. Enumeration: 'rs-422': 1, 'rs-232': 0, 'rs-485-4-wire': 3, 'rs-485-2-wire': 2.
                             serialPortBuffering 1.3.6.1.4.1.8691.2.13.1.6.5
                                 monitorSerialPortBufferingTable 1.3.6.1.4.1.8691.2.13.1.6.5.1 no-access
Serial Port Buffering table.
                                     monitorSerialPortBufferingEntry 1.3.6.1.4.1.8691.2.13.1.6.5.1.1 no-access
Serial Port Settings entry.
                                         monitorBuffering 1.3.6.1.4.1.8691.2.13.1.6.5.1.1.1 integer read-only
View length of buffered data for the port. The length unit is byte.
                             sysWlanStatus 1.3.6.1.4.1.8691.2.13.1.6.6
                                 wlanStatusActiveProfileName 1.3.6.1.4.1.8691.2.13.1.6.6.1 displaystring read-only
The active profile name.
                                 wlanStatusIpConfiguration 1.3.6.1.4.1.8691.2.13.1.6.6.2 integer read-only
The IP configuration mode of the NPort. You can choose from four possible IP configuration modes: Static, DHCP, DHCP/BOOTP, BOOTP. Enumeration: 'dhcp': 1, 'static': 0, 'bootp': 2.
                                 wlanStatusIpAddress 1.3.6.1.4.1.8691.2.13.1.6.6.3 ipaddress read-only
An IP address is a number assigned to a network device (such as a computer) as a permanent address on the network. Computers use the IP address to identify and talk to each other over the network. Choose a proper IP address that is unique and valid in your network environment.
                                 wlanStatusNetMask 1.3.6.1.4.1.8691.2.13.1.6.6.4 ipaddress read-only
A subnet mask represents all of the network hosts at one geographic location, in one building, or on the same local area network. When a packet is sent out over the network, the NPort W2x50A series device server will use the subnet mask to check whether the TCP/IP host specified in the packet is on the local network segment. If the address is on the same network segment as the NPort W2x50A series device server, a connection is established directly from the NPort W2x50A series device server. Otherwise, the connection is established through the given default gateway.
                                 wlanStatusDefaultGateway 1.3.6.1.4.1.8691.2.13.1.6.6.5 ipaddress read-only
A gateway is a network computer that acts as an entrance to another network. Usually, the computers that control traffic within the network or at the local Internet service provider are gateway nodes. The NPort W2x50A series device server needs to know the IP address of the default gateway computer in order to communicate with the hosts outside the local network environment. For correct gateway IP address information, consult with the network administrator.
                                 wlanStatusNetworkType 1.3.6.1.4.1.8691.2.13.1.6.6.6 displaystring read-only
Network Type of Wireless LAN. The possible values are 'Infrastrcture Mode' and 'Ad-hoc Mode'
                                 wlanStatusRFType 1.3.6.1.4.1.8691.2.13.1.6.6.7 displaystring read-only
RF type of Wireless LAN. The possible values are 'N/A', 'Auto', '802.11a', '802.11b', '802.11g'
                                 wlanStatusSSID 1.3.6.1.4.1.8691.2.13.1.6.6.8 displaystring read-only
The SSID of WLAN.
                                 wlanStatusChannel 1.3.6.1.4.1.8691.2.13.1.6.6.9 displaystring read-only
The currently used channel.
                                 wlanStatusAuthentication 1.3.6.1.4.1.8691.2.13.1.6.6.10 displaystring read-only
Authentication type of Wireless LAN. The possible values are 'Unknown', 'Open System', 'Shared Key', 'WPA', 'WPA-PSK', 'WPA2', 'WPA2-PSK'
                                 wlanStatusEncryption 1.3.6.1.4.1.8691.2.13.1.6.6.11 displaystring read-only
Show encryption type of Wireless LAN.
                                 wlanStatusRegion 1.3.6.1.4.1.8691.2.13.1.6.6.12 displaystring read-only
Display region. The possible values are 'US', 'EU', 'JP'
                                 wlanStatusSignalStrength 1.3.6.1.4.1.8691.2.13.1.6.6.13 displaystring read-only
The signal strength of Wireless LAN.
                                 wlanStatusConnectionSpeed 1.3.6.1.4.1.8691.2.13.1.6.6.14 displaystring read-only
The connection speed of Wireless LAN.
                                 wlanStatusCurrentBSSID 1.3.6.1.4.1.8691.2.13.1.6.6.15 displaystring read-only
The current BSSID of Wireless LAN.
                         activateSettings 1.3.6.1.4.1.8691.2.13.1.7
                             doActivate 1.3.6.1.4.1.8691.2.13.1.7.1 integer read-write
Activate current settings. Enumeration: 'activate': 1.
                         restart 1.3.6.1.4.1.8691.2.13.1.8
                             restartPorts 1.3.6.1.4.1.8691.2.13.1.8.1 integer read-write
Restart serial port. Restarting will cause port reseting. Enumeration: 'port2': 1, 'port1': 0.
                             restartSystem 1.3.6.1.4.1.8691.2.13.1.8.2 integer read-write
Restart the NPort W2x50A series device server. Be sure to save all of your configuration changes before you restart the system. Otherwise, all of the changes will be lost. Enumeration: 'restart': 1.