MOXA-NP6000-MIB: View SNMP OID List / Download MIB

VENDOR: MOXA TECHNOLOGIES CO.


 Home MIB: MOXA-NP6000-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 moxa 1.3.6.1.4.1.8691
           nport 1.3.6.1.4.1.8691.2
               np6000 1.3.6.1.4.1.8691.2.8
The MIB module for Moxa NPort 6000 series specific information.
                   swMgmt 1.3.6.1.4.1.8691.2.8.1
                       overview 1.3.6.1.4.1.8691.2.8.1.1
                           modelName 1.3.6.1.4.1.8691.2.8.1.1.1 displaystring read-only
The model name of the NPort. The possible values of this parameter are: 'NP6150' for NPort 6150, 'NP6250' for NPort 6250, 'NP6250-S-SC' for NPort 6250-S-SC, 'NP6250-M-SC' for NPort NPort 6250-M-SC, 'NP6450' for NPort 6450, 'NP6650-8' for NPort 6650-8, and 'NP6650-16' for NPort 6650-16.
                           serialNumber 1.3.6.1.4.1.8691.2.8.1.1.2 integer read-only
The serial number of the NPort. Every NPort 6000 series device server is assigned a unique serial number before it is shipped.
                           firmwareVersion 1.3.6.1.4.1.8691.2.8.1.1.3 displaystring read-only
The version of the firmware currently running on the NPort.
                           macAddress 1.3.6.1.4.1.8691.2.8.1.1.4 macaddress read-only
The MAC address of the NPort's Ethernet interface.
                           viewLanSpeed 1.3.6.1.4.1.8691.2.8.1.1.5 displaystring read-only
The current speed and link status of the NPort's built-in LAN port. The possible values are 'No link', '10M/Link,' or '100M/Link.'
                           viewLanModuleSpeed 1.3.6.1.4.1.8691.2.8.1.1.6 displaystring read-only
The current speed and link status of the the network module's LAN ports, if the module is installed. The value includes two parts. Each part indicates the status of one of the LAN ports. The possible values are 'No link', '10M/Link,' '100M/Link,' or continunous dashes to indicate that the LAN module is not installed.
                           upTime 1.3.6.1.4.1.8691.2.8.1.1.7 displaystring read-only
The time (in human-readable notation) since the system was was last re-initialized.
                           moduleType 1.3.6.1.4.1.8691.2.8.1.1.8 displaystring read-only
The module name currently plugged into the NPort.
                       basicSetting 1.3.6.1.4.1.8691.2.8.1.2
                           serverSetting 1.3.6.1.4.1.8691.2.8.1.2.1
                               serverName 1.3.6.1.4.1.8691.2.8.1.2.1.1 displaystring read-write
A text string used to identify the NPort.
                               serverLocation 1.3.6.1.4.1.8691.2.8.1.2.1.2 displaystring read-write
A text string used to identify the location of the NPort. This option is useful for specifying the location or application of different NPort device servers.
                           timeSetting 1.3.6.1.4.1.8691.2.8.1.2.2
                               timeZone 1.3.6.1.4.1.8691.2.8.1.2.2.1 integer read-write
The time-zone index of the NPort.
                               localTime 1.3.6.1.4.1.8691.2.8.1.2.2.2 dateandtime read-write
The system time in seconds since 1970/1/1.
                               timeServer 1.3.6.1.4.1.8691.2.8.1.2.2.3 displaystring read-write
The NPort 6000 series device server uses SNTP (RFC-1769) for auto time calibration. Input the correct 'Time server' IP address or domain name. Once the NPort 6000 series device server is configured with the correct Time server address, it will request time information from the Time server every 10 minutes.
                       networkSetting 1.3.6.1.4.1.8691.2.8.1.3
                           ipConfiguration 1.3.6.1.4.1.8691.2.8.1.3.1 integer read-write
The IP configuration mode of the NPort. You can choose from four possible IP configuration modes: Static, DHCP, DHCP/BOOTP, BOOTP, and PPPoE. Enumeration: 'dhcp-BOOTP': 2, 'dhcp': 1, 'static': 0, 'bootp': 3, 'pppoe': 4.
                           sysIpAddress 1.3.6.1.4.1.8691.2.8.1.3.2 ipaddress read-write
An IP address is a number assigned to a network device (such as a computer) as a permanent address on the network. Computers use the IP address to identify and talk to each other over the network. Choose a proper IP address that is unique and valid in your network environment.
                           netMask 1.3.6.1.4.1.8691.2.8.1.3.3 ipaddress read-write
A subnet mask represents all of the network hosts at one geographic location, in one building, or on the same local area network. When a packet is sent out over the network, the NPort 6000 series device server will use the subnet mask to check whether the TCP/IP host specified in the packet is on the local network segment. If the address is on the same network segment as the NPort 6000 series device server, a connection is established directly from the NPort 6000 series device server. Otherwise, the connection is established through the given default gateway.
                           defaultGateway 1.3.6.1.4.1.8691.2.8.1.3.4 ipaddress read-only
A gateway is a network computer that acts as an entrance to another network. Usually, the computers that control traffic within the network or at the local Internet service provider are gateway nodes. The NPort 6000 series device server needs to know the IP address of the default gateway computer in order to communicate with the hosts outside the local network environment. For correct gateway IP address information, consult with the network administrator.
                           dnsServer1IpAddr 1.3.6.1.4.1.8691.2.8.1.3.5 ipaddress read-write
The first DNS server address. When the user wants to visit a particular website, the computer asks a Domain Name System (DNS) server for the websites correct IP address, and then the computer uses the response to connect to the web server. DNS is the way that Internet domain names are identified and translated into IP addresses. A domain name is an alphanumeric name, such as moxa.com, that it is usually easier to remember. A DNS server is a host that translates this kind of text-based domain name into the numeric IP address used to establish a TCP/IP connection.
                           dnsServer2IpAddr 1.3.6.1.4.1.8691.2.8.1.3.6 ipaddress read-write
The second DNS server address. When the user wants to visit a particular website, the computer asks a Domain Name System (DNS) server for the websites correct IP address, and then the computer uses the response to connect to the web server. DNS is the way that Internet domain names are identified and translated into IP addresses. A domain name is an alphanumeric name, such as moxa.com, that it is usually easier to remember. A DNS server is a host that translates this kind of text-based domain name into the numeric IP address used to establish a TCP/IP connection.
                           pppoeUserAccount 1.3.6.1.4.1.8691.2.8.1.3.7 displaystring read-write
The user account used by the NPort to access the Internet using PPPoE. For dynamic broad band networks such as xDSL or Cable Modem, users must enter the username and password that they received from their ISP to establish a network connection.
                           pppoePassword 1.3.6.1.4.1.8691.2.8.1.3.8 displaystring read-write
The password used by the NPort to access the Internet using PPPoE. For dynamic broad band networks such as xDSL or Cable Modem, users must enter the username and password that they received from their ISP to establish a network connection.
                           winsFunction 1.3.6.1.4.1.8691.2.8.1.3.9 integer read-write
Enable or disable the WINS server. Enumeration: 'enable': 1, 'disable': 0.
                           winsServer 1.3.6.1.4.1.8691.2.8.1.3.10 ipaddress read-write
If a WINS Server is connected to the network, use this field to record the WINS Servers IP address. TCP/IP uses IP addresses to identify hosts, but users often use symbolic names, such as computer names. The WINS Server, which uses NetBIOS over TCP/IP, contains a dynamic database to map computer names to IP addresses.
                           lan1Speed 1.3.6.1.4.1.8691.2.8.1.3.11 integer read-write
IEEE802.3 Ethernet supports the auto negotiation speed function to get suitable speeds. However, for connecting to some switches/hubs, the communication speed must be fixed at 100 Mbps or 10 Mbps. Users can use this function to fix the communication speed. Enumeration: 'hundredMbps-Half': 3, 'hundredMbps-Full': 4, 'auto-Negation': 0, 'tenMbps-Full': 2, 'tenMbps-Half': 1.
                           routingProtocol 1.3.6.1.4.1.8691.2.8.1.3.12 integer read-write
The routing protocol used by the NPort. This value could be none, RIP-1, or RIP-2. Enumeration: 'rip-2': 2, 'none': 0, 'rip-1': 1.
                           gratuitousArp 1.3.6.1.4.1.8691.2.8.1.3.13 integer read-write
Enable or disable the gratuitous ARP function. For some applications, users need the NPort 6000 series device server to send broadcast packets to update the ARP table on the server. If the customer enables this function and sets the send period, the NPort 6000 series device server will send broadcast packets periodically. Enumeration: 'enable': 1, 'disable': 0.
                           gratuitousArpSendPeriod 1.3.6.1.4.1.8691.2.8.1.3.14 integer read-write
The send period of the gratuitous ARP function.
                       portSetting 1.3.6.1.4.1.8691.2.8.1.4
                           opModeSetting 1.3.6.1.4.1.8691.2.8.1.4.1
                               opMode 1.3.6.1.4.1.8691.2.8.1.4.1.1
                                   opModePortTable 1.3.6.1.4.1.8691.2.8.1.4.1.1.1 no-access
The serial ports' operation mode table.
                                       opModePortEntry 1.3.6.1.4.1.8691.2.8.1.4.1.1.1.1 no-access
The serial port's operation mode entry.
                                           portIndex 1.3.6.1.4.1.8691.2.8.1.4.1.1.1.1.1 integer read-only
The serial port index.
                                           portApplication 1.3.6.1.4.1.8691.2.8.1.4.1.1.1.1.2 integer read-write
The application of the serial port. Note that changing this setting may also change the operation mode. Enumeration: 'ethernet-Modem': 12, 'printer': 6, 'device-Control': 4, 'socket': 11, 'terminal': 2, 'disable': 0, 'pair-Connection': 13, 'reverse-Terminal': 3, 'dial-InOut': 1.
                                           portMode 1.3.6.1.4.1.8691.2.8.1.4.1.1.1.1.3 integer read-write
The operation mode of the serial port. Note that changing this setting may also change the application. Enumeration: 'ethernet-Modem': 12, 'lpd-PRN': 11, 'tcp-Client': 13, 'reverse-SSH': 18, 'pair-Master': 1, 'tcp-Server': 10, 'dynamic': 9, 'udp': 14, 'disable': 7, 'pppd': 15, 'ppp': 6, 'aspp': 2, 'ssh': 19, 'slip': 4, 'slipd': 5, 'rfc-2217': 20, 'raw-PRN': 3, 'telnetd': 8, 'pair-Slave': 0, 'term-BIN': 17, 'term-ASC': 16.
                               application 1.3.6.1.4.1.8691.2.8.1.4.1.2
                                   deviceControl 1.3.6.1.4.1.8691.2.8.1.4.1.2.1
                                       deviceControlTable 1.3.6.1.4.1.8691.2.8.1.4.1.2.1.1 no-access
The Device Control application table.
                                           deviceControlEntry 1.3.6.1.4.1.8691.2.8.1.4.1.2.1.1.1 no-access
The Device Control application entry.
                                               deviceControlTcpAliveCheck 1.3.6.1.4.1.8691.2.8.1.4.1.2.1.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort 6000 series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort 6000 series device server starts listening for another Real COM driver Connection.
                                               deviceControlMaxConnection 1.3.6.1.4.1.8691.2.8.1.4.1.2.1.1.1.2 integer read-write
Max connection is usually used when the user needs to receive data from different hosts simultaneously. The factory default is 1. In this case, only one specific host can access this port of the NPort 6000 series device server, and the Real COM driver on that host will have full control over the port. Max. connection = 1: Allows only a single hosts Real COM driver to open the specific NPort 6000 series device servers serial port. Max connection = 2 to 8: Allows 2 to 8 hosts Real COM drivers to open the specific NPort 6000 series device servers serial port, at the same time. When multiple hosts Real COM drivers open the serial port at the same time, the COM driver only provides a pure data tunnel without control ability. The serial port parameter will use the firmware settings instead of getting the settings from your application program (AP).
                                               deviceControlIgnoreJammedIp 1.3.6.1.4.1.8691.2.8.1.4.1.2.1.1.1.3 integer read-write
Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped responding, the serial device would wait until the data had been transmitted successfully before transmitting the second group of data to all hosts. Currently, if you select Yes for 'Ignore jammed IP,' the host that is not responding will be ignored, but the data will still be transmitted to the other hosts. Enumeration: 'yes': 1, 'no': 0.
                                               deviceControlAllowDriverControl 1.3.6.1.4.1.8691.2.8.1.4.1.2.1.1.1.4 integer read-write
If Max connection is greater than 1, NPort will ignore driver control commands from all connected hosts. However, if you set Allow driver control to YES, control commands will be accepted. Note that since the NPort 6000 series device server may get configuration changes from multiple hosts, the most recent command received will take precedence. Enumeration: 'yes': 1, 'no': 0.
                                               deviceControlSecure 1.3.6.1.4.1.8691.2.8.1.4.1.2.1.1.1.5 integer read-write
If 'Secure' is enabled, the data on the Ethernet will be encrypted with SSL. Enumeration: 'yes': 1, 'no': 0.
                                               deviceControlTcpPort 1.3.6.1.4.1.8691.2.8.1.4.1.2.1.1.1.6 integer read-write
The 'TCP port' is the TCP port that the NPort 6000 series device server uses to listen to connections, and that other devices must use to contact the NPort 6000 series device server.
                                               deviceControlConnectionDownRTS 1.3.6.1.4.1.8691.2.8.1.4.1.2.1.1.1.7 integer read-write
For some applications, serial devices must obtain the Ethernet link status by reading the RTS signal from the NPort 6000 series device server. If this setting is set to 'goes low,' RTS will change its state to low if the Ethernet link is off. Enumeration: 'always-high': 0, 'goes-low': 1.
                                               deviceControlConnectionDownDTR 1.3.6.1.4.1.8691.2.8.1.4.1.2.1.1.1.8 integer read-write
For some applications, serial devices must obtain the Ethernet link status by reading the DTR signal from the NPort 6000 series device server. If this setting is set to 'goes low,' DTR will change its state to low if the Ethernet link is off. Enumeration: 'always-high': 0, 'goes-low': 1.
                                   socket 1.3.6.1.4.1.8691.2.8.1.4.1.2.2
                                       socketTable 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1 no-access
The Socket application table.
                                           socketEntry 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1 no-access
The Socket application entry.
                                               socketTcpAliveCheck 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection is idle. 1 to 99 min: The NPort 6000 series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort 6000 series device server starts listening for another Real COM driver Connection.
                                               socketInactivityTime 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.2 integer read-write
0 ms: TCP connection is not closed when the serial line is idle. 1-65535 ms: The NPort 6000 series device server automatically closes the TCP connection if there is no serial data activity for the given time. After the connection is closed, the NPort 6000 series device server starts listening for another TCP connection.
                                               socketMaxConnection 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.3 integer read-write
Max connection is usually used when the user needs to receive data from different hosts simultaneously. The factory default is 1. In this case, only one specific host can access this port of the NPort 6000 series device server, and the Real COM driver on that host will have full control over the port. Max. connection 1: Allows only a single hosts Real COM driver to open the specific NPort 6000 series device servers serial port. Max connection 2 to 8: Allows 2 to 8 hosts Real COM drivers to open the specific NPort 6000 series device servers serial port, at the same time. When multiple hosts Real COM drivers open the serial port at the same time, the COM driver only provides a pure data tunnel without control ability. The serial port parameter will use the firmware settings instead of depending on your application program (AP).
                                               socketIgnoreJammedIp 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.4 integer read-write
Previously, when Max connection was set to a value greater than 1, and the serial device was transmitting data, if any one of the connected hosts stopped responding, the serial device would wait until the data had been transmitted successfully before transmitting the second group of data to all hosts. Currently, if you select Yes for 'Ignore jammed IP,' the host that is not responding will be ignored, but the data will still be transmitted to the other hosts. Enumeration: 'yes': 1, 'no': 0.
                                               socketAllowDriverControl 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.5 integer read-write
If Max connection is greater than 1, NPort will ignore driver control commands from all connected hosts. However, if you set Allow driver control to YES, control commands will be accepted. Note that since the NPort 6000 series device server may get configuration changes from multiple hosts, the most recent command received will take precedence. Enumeration: 'yes': 1, 'no': 0.
                                               socketSecure 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.6 integer read-write
If Secure is enabled, data sent over the Ethernet will be encrypted with SSL. Enumeration: 'yes': 1, 'no': 0.
                                               socketTcpPort 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.7 integer read-write
The 'TCP port' is the TCP port that the NPort 6000 series device server uses to listen to connections, and that other devices must use to contact the NPort 6000 series device server.
                                               socketCmdPort 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.8 integer read-write
The 'Command port' is a TCP port used to listen for IP-Serial Lib commands from the host. In order to prevent a TCP port conflict with other applications, the user can set the Command port to another port if needed. IP-Serial Lib will automatically check the Command Port on the NPort 6000 series device server to avoid the need for the user to configure the program.
                                               socketTcpServerConnectionDownRTS 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.9 integer read-write
For some applications, serial devices must obtain the Ethernet link status from the RTS signal sent by the NPort 6000 series device server. If this setting is set to 'goes low,' RTS will change the state to low if the Ethernet link is off. Enumeration: 'always-high': 0, 'goes-low': 1.
                                               socketTcpServerConnectionDownDTR 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.10 integer read-write
For some applications, serial devices must obtain the Ethernet link status from the DTR signal sent by the NPort 6000 series device server. If this setting is set to 'goes low,' DTR will change the state to low if the Ethernet link is off. Enumeration: 'always-high': 0, 'goes-low': 1.
                                               socketTcpClientDestinationAddress1 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.11 displaystring read-write
The NPort 6000 series device server can connect actively to a remote host that has this IP address.
                                               socketTcpClientDestinationPort1 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.12 integer read-write
The NPort 6000 series device server can connect actively to a remote host that has this TCP port number.
                                               socketTcpClientDestinationAddress2 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.13 displaystring read-write
The NPort 6000 series device server can connect actively to a remote host that has this IP address.
                                               socketTcpClientDestinationPort2 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.14 integer read-write
The NPort 6000 series device server can connect actively to a remote host that has this TCP port number.
                                               socketTcpClientDestinationAddress3 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.15 displaystring read-write
The NPort 6000 series device server can connect actively to a remote host that has this IP address.
                                               socketTcpClientDestinationPort3 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.16 integer read-write
The NPort 6000 series device server can connect actively to a remote host that has this port number.
                                               socketTcpClientDestinationAddress4 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.17 displaystring read-write
The NPort 6000 series device server can connect actively to a remote host that has this IP address.
                                               socketTcpClientDestinationPort4 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.18 integer read-write
The NPort 6000 series device server can connect actively to a remote host that has this port number.
                                               socketTcpClientDesignatedLocalPort1 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.19 integer read-write
The local TCP port used to connect actively to the remote host.
                                               socketTcpClientDesignatedLocalPort2 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.20 integer read-write
The local TCP port used to connect actively to the remote host.
                                               socketTcpClientDesignatedLocalPort3 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.21 integer read-write
The local TCP port used to connect actively to the remote host.
                                               socketTcpClientDesignatedLocalPort4 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.22 integer read-write
The local TCP port used to connect actively to the remote host.
                                               socketTcpClientConnectionControl 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.23 integer read-write
Events that cause the TCP client to drop the connection. Enumeration: 'dcdOn-None': 264, 'dsrOn-None': 260, 'dcdOn-DCD-Off': 2056, 'anyCharacter-None': 258, 'anyCharacter-InactivityTime': 514, 'dsrOn-DSR-Off': 1028, 'startup-None': 257.
                                               socketUdpDestinationAddress1Begin 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.24 ipaddress read-write
The NPort 6000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and socketUdpDestinationAddress1End.
                                               socketUdpDestinationAddress1End 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.25 ipaddress read-write
The NPort 6000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between socketUdpDestinationAddress1Begin and this parameter.
                                               socketUdpDestinationPort1 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.26 integer read-write
The NPort 6000 series device server can actively send UDP packets to remote hosts that have this port number.
                                               socketUdpDestinationAddress2Begin 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.27 ipaddress read-write
The NPort 6000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and socketUdpDestinationAddress2End.
                                               socketUdpDestinationAddress2End 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.28 ipaddress read-write
The NPort 6000 series device server can actively send UDP packets to the remote hosts whose IP addresses are in the range between socketUdpDestinationAddress2Begin and this parameter.
                                               socketUdpDestinationPort2 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.29 integer read-write
The NPort 6000 series device server can actively send UDP packets to the remote hosts that have this TCP port number.
                                               socketUdpDestinationAddress3Begin 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.30 ipaddress read-write
The NPort 6000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and socketUdpDestinationAddress3End.
                                               socketUdpDestinationAddress3End 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.31 ipaddress read-write
The NPort 6000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between socketUdpDestinationAddress3Begin and this parameter.
                                               socketUdpDestinationPort3 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.32 integer read-write
The NPort 6000 series device server can actively send UDP packets to remote hosts that have this TCP port number.
                                               socketUdpDestinationAddress4Begin 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.33 ipaddress read-write
The NPort 6000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between this parameter and socketUdpDestinationAddress4End.
                                               socketUdpDestinationAddress4End 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.34 ipaddress read-write
The NPort 6000 series device server can actively send UDP packets to remote hosts whose IP addresses are in the range between socketUdpDestinationAddress4Begin and this parameter.
                                               socketUdpDestinationPort4 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.35 integer read-write
The NPort 6000 series device server can actively send UDP packets to remote hosts that have this TCP port number.
                                               socketUdpLocalListenPort 1.3.6.1.4.1.8691.2.8.1.4.1.2.2.1.1.36 integer read-write
The UDP port that the NPort 6000 series device server listens to and that other devices must use to contact the NPort 6000 series device server.
                                   pairConnection 1.3.6.1.4.1.8691.2.8.1.4.1.2.3
                                       pairConnectionTable 1.3.6.1.4.1.8691.2.8.1.4.1.2.3.1 no-access
The Pair Connection table.
                                           pairConnectionEntry 1.3.6.1.4.1.8691.2.8.1.4.1.2.3.1.1 no-access
The Pair Connection entry.
                                               pairConnectionTcpAliveCheck 1.3.6.1.4.1.8691.2.8.1.4.1.2.3.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed if the TCP connection becomes idle. 1 to 99 min: The NPort 6000 series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort 6000 series device server starts listening for another Real COM driver Connection.
                                               pairConnectionSecure 1.3.6.1.4.1.8691.2.8.1.4.1.2.3.1.1.2 integer read-write
If Secure is enabled, the Ethernet data will be encrypted using SSL. Enumeration: 'yes': 1, 'no': 0.
                                               pairConnectionDestinationAddress 1.3.6.1.4.1.8691.2.8.1.4.1.2.3.1.1.3 displaystring read-write
The Pair Connection 'Master' will contact the network host that has the specified IP address.
                                               pairConnectionDestinationPort 1.3.6.1.4.1.8691.2.8.1.4.1.2.3.1.1.4 integer read-write
Data will be transmitted through the specified port number. Note that you must configure the same TCP port number for the device server acting as the Pair Connection 'Slave.'
                                               pairConnectionTcpPort 1.3.6.1.4.1.8691.2.8.1.4.1.2.3.1.1.5 integer read-write
This port number must be the same port number that was set up for the Pair Connection 'Master' device server.
                                   ethernetModem 1.3.6.1.4.1.8691.2.8.1.4.1.2.4
                                       ethernetModemTable 1.3.6.1.4.1.8691.2.8.1.4.1.2.4.1 no-access
The Ethernet Modem table.
                                           ethernetModemEntry 1.3.6.1.4.1.8691.2.8.1.4.1.2.4.1.1 no-access
The Ethernet Modem entry.
                                               ethernetModemTcpAliveCheck 1.3.6.1.4.1.8691.2.8.1.4.1.2.4.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed if the TCP connection becomes idle. 1 to 99 min: The NPort 6000 series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort 6000 series device server starts listening for another Real COM driver Connection.
                                               ethernetModemTcpPort 1.3.6.1.4.1.8691.2.8.1.4.1.2.4.1.1.2 integer read-write
The local TCP port used to listen for incoming calls from a remote ethernet modem.
                                   terminal 1.3.6.1.4.1.8691.2.8.1.4.1.2.5
                                       terminalTable 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1 no-access
The Terminal Application table.
                                           terminalEntry 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1 no-access
The Terminal Application entry.
                                               terminalTcpAliveCheck 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed if the TCP connection becomes idle. 1 to 99 min: The NPort 6000 series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort 6000 series device server starts listening for another Real COM driver Connection from another host.
                                               terminalInactivityTime 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.2 integer read-write
0 min: TCP connection will not be closed if the serial line becomes idle. 0-99 min: The NPort 6000 series device server automatically closes the TCP connection if there is no serial data activity for the given time. After the connection is closed, the NPort 6000 series device server starts listening for another host's TCP connection.
                                               terminalAutoLinkProtocol 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.3 integer read-write
If Auto-Link protocol is set to 'None,' the NPort 6000 series device server will not connect to the host automatically. If Auto-Link protocol is set to 'Telnet,' the NPort 6000 series device server will connect to the host automatically using Telnet. If Auto-Link protocol is set to 'Rlogin,' the NPort 6000 series device server will connect to the host automatically using rlogin. Enumeration: 'none': 0, 'telnet': 1, 'rlogin': 2.
                                               terminalPrimaryHostAddress 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.4 displaystring read-write
If specified, designates a 'permanent' host to which the terminal will always be connected.
                                               terminalSecondHostAddress 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.5 displaystring read-write
If specified, designates a 'permanent' host to which the terminal will always be connected.
                                               terminalTelnetTcpPort 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.6 integer read-write
By default, the Telnet TCP port number is set to 23, which is the default TCP port number for Telnet. If you need to telnet to this NPort 6000 series device server's serial port, set the Telnet TCP port to a different number.
                                               terminalSshTcpPort 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.7 integer read-write
By default, the SSH TCP port number is set to 22, which is the default TCP port number for SSH. If you need to use SSH to connect to this NPort 6000 series device server's serial port, set the Telnet TCP port to a different number.
                                               terminalType 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.8 displaystring read-write
Defines the terminal type for outgoing connections.
                                               terminalMaxSessions 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.9 integer read-write
Configure the max. number of sessions.
                                               terminalChangeSession 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.10 displaystring read-write
Defines the control character used to change the terminal session.
                                               terminalQuit 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.11 displaystring read-write
Defines the control character used to quit a terminal session.
                                               terminalBreak 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.12 displaystring read-write
Defines the control character used to send a Telnet BREAK message.
                                               terminalInterrupt 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.13 displaystring read-write
Defines the control character used to send a Telnet INTERRUPT message.
                                               terminalAuthenticationType 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.14 integer read-write
The terminal authentication type. Enumeration: 'radius': 2, 'none': 0, 'local': 1.
                                               terminalAutoLoginPrompt 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.15 displaystring read-write
The prompt string for the automatic login ID. When the NPort 6000 series device server receives this string from a remote telnet/rlogin server, it will automatically reply with the user ID.
                                               terminalPasswordPrompt 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.16 displaystring read-write
The prompt string for the automatic login password. When the NPort 6000 series device server receives this string from a remote telnet/rlogin server, it will automatically reply with the user password.
                                               terminalLoginUserName 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.17 displaystring read-write
Terminal login ID for automatic login.
                                               terminalLoginPassword 1.3.6.1.4.1.8691.2.8.1.4.1.2.5.1.1.18 displaystring read-write
Terminal login password for automatic login.
                                   reverseTerminal 1.3.6.1.4.1.8691.2.8.1.4.1.2.6
                                       reverseTerminalTable 1.3.6.1.4.1.8691.2.8.1.4.1.2.6.1 no-access
The Reverse Terminal Application table.
                                           reverseTerminalEntry 1.3.6.1.4.1.8691.2.8.1.4.1.2.6.1.1 no-access
The Reverse Terminal Application entry.
                                               reverseTerminalTcpAliveCheck 1.3.6.1.4.1.8691.2.8.1.4.1.2.6.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed when the TCP connection becomes idle. 1 to 99 min: The NPort 6000 series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort 6000 series device server starts listening for another Real COM driver Connection.
                                               reverseTerminalInactivityTime 1.3.6.1.4.1.8691.2.8.1.4.1.2.6.1.1.2 integer read-write
0 min: TCP connection will not be closed if the serial line becomes idle. 0-99 min: The NPort 6000 series device server automatically closes the TCP connection if there is no serial data activity for the given time. After the connection is closed, the NPort 6000 series device server starts listening for another TCP connection.
                                               reverseTerminalTcpPort 1.3.6.1.4.1.8691.2.8.1.4.1.2.6.1.1.3 integer read-write
Each of the NPort 6000 series device server's serial ports are mapped to a TCP port.
                                               reverseTerminalAuthenticationType 1.3.6.1.4.1.8691.2.8.1.4.1.2.6.1.1.4 integer read-write
The reverse terminal authentication type. Enumeration: 'radius': 2, 'none': 0, 'local': 1.
                                               reverseTerminalMapKeys 1.3.6.1.4.1.8691.2.8.1.4.1.2.6.1.1.5 integer read-write
If data received through NPort 6000 series device server's Ethernet port is sent using the 'enter' command, the data will be transmitted out through the serial port with an added 1. 'carriage return + line feed' if you select the 'cr-lf' option (i.e., the cursor will jump to the next line, and return to the first character of the line) 2. 'carriage return' if you select the 'cr' option (i.e., the cursor will return to the first character of the line 3. 'line feed' if you select the 'lf' option. (i.e., the cursor will jump to the next line, but not move horizontally) Enumeration: 'lf': 2, 'cr': 1, 'cr-lf': 0.
                                   printer 1.3.6.1.4.1.8691.2.8.1.4.1.2.7
                                       printerTable 1.3.6.1.4.1.8691.2.8.1.4.1.2.7.1 no-access
The Printer Application table.
                                           printerEntry 1.3.6.1.4.1.8691.2.8.1.4.1.2.7.1.1 no-access
The Printer Application entry.
                                               printerTcpAliveCheck 1.3.6.1.4.1.8691.2.8.1.4.1.2.7.1.1.1 integer read-write
The TCP alive check time. 0 min: TCP connection will not be closed if the TCP connection becomes idle. 1 to 99 min: The NPort 6000 series device server automatically closes the TCP connection if there is no TCP activity for the given time. After the connection is closed, the NPort 6000 series device server starts listening for another Real COM driver Connection.
                                               printerTcpPort 1.3.6.1.4.1.8691.2.8.1.4.1.2.7.1.1.2 integer read-only
The host uses this value to determine the Group to which the printer attached to this serial port belongs. These values are fixed, and cannot be changed by the user.
                                               printerGroup 1.3.6.1.4.1.8691.2.8.1.4.1.2.7.1.1.3 integer read-write
Groups printers attached to different ports. Printers in the same group will share the printing load for printing requests to that group of printers. E.g., setting the NPort 6000 series device server's serial ports 1, 3, and 6 for 'Group01' will allow the printers attached to these three ports to act essentially as one printer. Enumeration: 'group11': 10, 'group10': 9, 'group13': 12, 'group12': 11, 'group15': 14, 'group14': 13, 'group16': 15, 'group5': 4, 'group4': 3, 'group7': 6, 'group6': 5, 'group1': 0, 'group3': 2, 'group2': 1, 'group9': 8, 'group8': 7.
                                               printerQueueNameRaw 1.3.6.1.4.1.8691.2.8.1.4.1.2.7.1.1.4 displaystring read-write
Specify the name of the print queue (in RAW mode).
                                               printerQueueNameASCII 1.3.6.1.4.1.8691.2.8.1.4.1.2.7.1.1.5 displaystring read-write
Specify the name of the print queue (in ASCII mode).
                                               printerAppendFromFeed 1.3.6.1.4.1.8691.2.8.1.4.1.2.7.1.1.6 integer read-write
Specify paging. Enumeration: 'enable': 1, 'disable': 0.
                                   dial 1.3.6.1.4.1.8691.2.8.1.4.1.2.8
                                       dialTable 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1 no-access
The Dial In/Out table.
                                           dialEntry 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1 no-access
The Dial In/Out entry.
                                               dialTERMBINMode 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.1 integer read-write
Select Yes to enable a Binary Terminal connection. Enumeration: 'yes': 1, 'no': 0.
                                               dialPPPDMode 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.2 integer read-write
Select Yes to enable a PPPD connection. Enumeration: 'yes': 1, 'no': 0.
                                               dialSLIPDMode 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.3 integer read-write
Select Yes to enable a SLIPD Terminal connection. Enumeration: 'yes': 1, 'no': 0.
                                               dialAuthType 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.4 integer read-write
The dial in/out authentication type. Enumeration: 'radius': 2, 'none': 0, 'local': 1.
                                               dialDisconnectBy 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.5 integer read-write
If this field is set to 'dcd-off,' the connection will be disconnected when the DCD signal is off. If this field is set to 'dsr-off,' the connection will be disconnected when the DSR signal is off. Enumeration: 'dsr-off': 4, 'none': 0, 'dcd-off': 2.
                                               dialDestinationIpAddress 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.6 ipaddress read-write
Destination IP address is the IP address of the remote dial-in/dial-out server.
                                               dialSourceIpAddress 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.7 ipaddress read-write
Source IP address is IP address of this serial port. The NPort 6000 series device server will automatically assign an IP address for the port. We recommend leaving this field blank.
                                               dialIpNetmask 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.8 ipaddress read-write
The IP netmask used for dial-in/dial-out networks (PPP or SLIP).
                                               dialTcpIpCompression 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.9 integer read-write
Depends on whether the remote user's application requests compression. Enumeration: 'yes': 1, 'no': 0.
                                               dialInactivityTime 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.10 integer read-write
0 ms: TCP connection will not be closed if the serial line becomes idle. 1-65535 ms: The NPort 6000 series device server automatically closes the TCP connection if there is no serial data activity for the given time. After the connection is closed, the NPort 6000 series device server starts listening for another TCP connection.
                                               dialLinkQualityReport 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.11 integer read-write
Choose YES if you are using software to collect Link quality information. Enumeration: 'yes': 1, 'no': 0.
                                               dialOutgoingPAPID 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.12 displaystring read-write
Dial-out user ID account.
                                               dialPAPPassword 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.13 displaystring read-write
Dial-out user password.
                                               dialIncomingPAPCheck 1.3.6.1.4.1.8691.2.8.1.4.1.2.8.1.1.14 integer read-write
The Dial in/out incoming PAP check type. Enumeration: 'radius': 2, 'none': 0, 'local': 1.
                               dataPacking 1.3.6.1.4.1.8691.2.8.1.4.1.3
                                   dataPackingPortTable 1.3.6.1.4.1.8691.2.8.1.4.1.3.1 no-access
The Data Packing table.
                                       dataPackingPortEntry 1.3.6.1.4.1.8691.2.8.1.4.1.3.1.1 no-access
The Data Packing entry.
                                           portPacketLength 1.3.6.1.4.1.8691.2.8.1.4.1.3.1.1.1 integer read-write
If the value is 0, the Delimiter Process will be used, regardless of the length of the data packet. If the data length (in bytes) matches the configured value, the data will be forced out. The data length can be configured from 0 to 1024 bytes. Set to 0 if you do not need to limit the length.
                                           portDelimiter1Enable 1.3.6.1.4.1.8691.2.8.1.4.1.3.1.1.2 integer read-write
Enable the first delimiter character. Enumeration: 'enable': 1, 'disable': 0.
                                           portDelimiter1 1.3.6.1.4.1.8691.2.8.1.4.1.3.1.1.3 displaystring read-write
The first delimiter character, in hex decimal.
                                           portDelimiter2Enable 1.3.6.1.4.1.8691.2.8.1.4.1.3.1.1.4 integer read-write
Enable the second delimiter character. Enumeration: 'enable': 1, 'disable': 0.
                                           portDelimiter2 1.3.6.1.4.1.8691.2.8.1.4.1.3.1.1.5 displaystring read-write
The second delimiter character, in hex decimal.
                                           portDelimiterProcess 1.3.6.1.4.1.8691.2.8.1.4.1.3.1.1.6 integer read-write
'delimiterAddOne' or 'delimiterAddTwo': The data will be transmitted when an additional byte (for 'delimiterAddOne'), or an additional 2 bytes (for 'delimiterAddTwo') of data is received after receiving the Delimiter. 'stripDelimiter': When the delimiter is received, the Delimiter is deleted (i.e., stripped), and the remaining data is transmitted. 'doNothing': The data will be transmitted when the delimiter is received. Enumeration: 'delimiterAddTwo': 4, 'stripDelimiter': 8, 'doNothing': 1, 'delimiterAddOne': 2.
                                           portForceTransmit 1.3.6.1.4.1.8691.2.8.1.4.1.3.1.1.7 integer read-write
0: Disable the force transmit timeout. 1 to 65535: Forces the NPort 6000 series device server's TCP/IP protocol software to try to pack serial data received during the specified time into the same data frame.
                           comParamSetting 1.3.6.1.4.1.8691.2.8.1.4.2
                               comParamPortTable 1.3.6.1.4.1.8691.2.8.1.4.2.1 no-access
The Communication Parameters table.
                                   comParamPortEntry 1.3.6.1.4.1.8691.2.8.1.4.2.1.1 no-access
The Communication Parameters entry.
                                       portAlias 1.3.6.1.4.1.8691.2.8.1.4.2.1.1.1 displaystring read-write
Port alias is included to allow easy identification of the serial devices that are connected to NPort 6000 series device server's serial port.
                                       portInterface 1.3.6.1.4.1.8691.2.8.1.4.2.1.1.2 integer read-write
The serial interface that the port works on. Enumeration: 'rs-422': 1, 'rs-232': 0, 'rs-485-4-wire': 3, 'rs-485-2-wire': 2.
                                       portBaudRate 1.3.6.1.4.1.8691.2.8.1.4.2.1.1.3 integer read-write
The port's speed in bits per second. You can choose a standard baud rate by indexing. Enumeration: 'b1800': 8, 'b150': 4, 'b75': 1, 'b9600': 12, 'b110': 2, 'b50': 0, 'b7200': 11, 'b2400': 9, 'b38400': 14, 'b19200': 13, 'b134': 3, 'b460800': 18, 'b600': 6, 'b921600': 19, 'b115200': 16, 'b300': 5, 'b57600': 15, 'b4800': 10, 'b230400': 17, 'b1200': 7.
                                       portBaudRateManual 1.3.6.1.4.1.8691.2.8.1.4.2.1.1.4 integer read-write
The port's speed in bits per second. You can specify a baud rate manually.
                                       portDataBits 1.3.6.1.4.1.8691.2.8.1.4.2.1.1.5 integer read-write
The number of bits in a character for the port. Enumeration: 'd6': 1, 'd7': 2, 'd5': 0, 'd8': 3.
                                       portStopBits 1.3.6.1.4.1.8691.2.8.1.4.2.1.1.6 integer read-write
The number of stop bits for the port. Enumeration: 's2': 2, 's1': 0, 's15': 1.
                                       portParity 1.3.6.1.4.1.8691.2.8.1.4.2.1.1.7 integer read-write
The parity bit for the port. Enumeration: 'even': 2, 'none': 0, 'space': 4, 'odd': 1, 'mark': 3.
                                       portFlowControl 1.3.6.1.4.1.8691.2.8.1.4.2.1.1.8 integer read-write
The flow-control method for the port. Enumeration: 'dtr-dsr': 3, 'none': 0, 'xon-xoff': 2, 'rts-cts': 1.
                                       portFIFO 1.3.6.1.4.1.8691.2.8.1.4.2.1.1.9 integer read-write
Enable or disable the port's FIFO. Enumeration: 'enable': 1, 'disable': 0.
                           dataBuffering 1.3.6.1.4.1.8691.2.8.1.4.3
                               dataBufferingPortTable 1.3.6.1.4.1.8691.2.8.1.4.3.1 no-access
The Data Buffering/Log table.
                                   dataBufferingPortEntry 1.3.6.1.4.1.8691.2.8.1.4.3.1.1 no-access
The Data Buffering/Log entry.
                                       portBufferingEnable 1.3.6.1.4.1.8691.2.8.1.4.3.1.1.1 integer read-write
Enable off-line port buffering. Enumeration: 'yes': 1, 'no': 0.
                                       portBufferingLocation 1.3.6.1.4.1.8691.2.8.1.4.3.1.1.2 integer read-write
The location of off-line port buffering. Enumeration: 'sdCard': 1, 'memory': 0.
                                       portBufferingSDFileSize 1.3.6.1.4.1.8691.2.8.1.4.3.1.1.3 integer read-write
The maximum file size of off-line port buffering, in MBytes, if the location is set to 'sdCard.'
                                       portSerialDataLoggingEnable 1.3.6.1.4.1.8691.2.8.1.4.3.1.1.4 integer read-write
Enable or disable serial data logging for the port. Enumeration: 'yes': 1, 'no': 0.
                           modemSettings 1.3.6.1.4.1.8691.2.8.1.4.4
                               modemSettingsPortTable 1.3.6.1.4.1.8691.2.8.1.4.4.1 no-access
The Modem Settings table.
                                   modemSettingsPortEntry 1.3.6.1.4.1.8691.2.8.1.4.4.1.1 no-access
The Modem Settings entry.
                                       portEnableModem 1.3.6.1.4.1.8691.2.8.1.4.4.1.1.1 integer read-write
Enable or disable modem for this port. Enumeration: 'enable': 1, 'disable': 0.
                                       portInitialString 1.3.6.1.4.1.8691.2.8.1.4.4.1.1.2 displaystring read-write
Set the modem's initial string to establish the connection. E.g., 'AT&S0=1' for auto-answer.
                                       portDialUp 1.3.6.1.4.1.8691.2.8.1.4.4.1.1.3 displaystring read-write
Set the modem's dial-up AT command string.
                                       portPhoneNumber 1.3.6.1.4.1.8691.2.8.1.4.4.1.1.4 displaystring read-write
Set the number used to dial out.
                           welcomeMessage 1.3.6.1.4.1.8691.2.8.1.4.5
                               portEnableWelcomeMessage 1.3.6.1.4.1.8691.2.8.1.4.5.1 integer read-write
Enable or disable the welcome message. Enumeration: 'enable': 1, 'disable': 0.
                               portMessage 1.3.6.1.4.1.8691.2.8.1.4.5.2 displaystring read-write
Set up a welcome message to greet dial-in users.
                       sysManagement 1.3.6.1.4.1.8691.2.8.1.5
                           miscNetworkSettings 1.3.6.1.4.1.8691.2.8.1.5.1
                               accessibleIp 1.3.6.1.4.1.8691.2.8.1.5.1.1
                                   enableAccessibleIpList 1.3.6.1.4.1.8691.2.8.1.5.1.1.1 integer read-write
Enable or disable the entire accessible IP list. Enumeration: 'enable': 1, 'disable': 0.
                                   accessibleIpListTable 1.3.6.1.4.1.8691.2.8.1.5.1.1.2 no-access
Accessible IP List table.
                                       accessibleIpListEntry 1.3.6.1.4.1.8691.2.8.1.5.1.1.2.1 no-access
Accessible IP List entry.
                                           accessibleIpListIndex 1.3.6.1.4.1.8691.2.8.1.5.1.1.2.1.1 integer read-only
Accessible IP List index.
                                           activeAccessibleIpList 1.3.6.1.4.1.8691.2.8.1.5.1.1.2.1.2 integer read-write
Enable or disable this accessible IP entry. Enumeration: 'enable': 1, 'disable': 0.
                                           accessibleIpListAddress 1.3.6.1.4.1.8691.2.8.1.5.1.1.2.1.3 ipaddress read-write
Accessible IP address. This value can be the IP address of a single host if the netmask is set to '255.255.255.255,' or it can be a network address.
                                           accessibleIpListNetmask 1.3.6.1.4.1.8691.2.8.1.5.1.1.2.1.4 ipaddress read-write
Accessible IP address netmask. The IP address and netmask are used to specify a group of remote hosts.
                               snmpAgentSettings 1.3.6.1.4.1.8691.2.8.1.5.1.2
                                   snmpEnable 1.3.6.1.4.1.8691.2.8.1.5.1.2.1 integer read-write
Enable or disable SNMP agent. Enumeration: 'enable': 1, 'disable': 0.
                                   snmpContactName 1.3.6.1.4.1.8691.2.8.1.5.1.2.2 displaystring read-write
The SNMP contact information usually includes an emergency contact name and telephone or pager number.
                                   snmpLocation 1.3.6.1.4.1.8691.2.8.1.5.1.2.3 displaystring read-write
Specify the location string for SNMP agents, such as the NPort 6000 series device server. This string is usually set to the street address where the NPort 6000 series device server is physically located.
                               dDNS 1.3.6.1.4.1.8691.2.8.1.5.1.3
                                   dDNSEnable 1.3.6.1.4.1.8691.2.8.1.5.1.3.1 integer read-write
Enable or disable the DDNS function. Enumeration: 'enable': 1, 'disable': 0.
                                   dDNSServerAddress 1.3.6.1.4.1.8691.2.8.1.5.1.3.2 integer read-write
The DDNS server address. The DDNS is serviced by a 3-party provider. To use the DDNS function, you may need to obtain a user account from the server. Enumeration: 'dynDns_org': 0.
                                   dDNSHostName 1.3.6.1.4.1.8691.2.8.1.5.1.3.3 displaystring read-write
The host name of the machine to be registered to the DDNS server.
                                   dDNSUserName 1.3.6.1.4.1.8691.2.8.1.5.1.3.4 displaystring read-write
The user account provided by the DDNS server.
                                   dDNSPassword 1.3.6.1.4.1.8691.2.8.1.5.1.3.5 displaystring read-write
The user password provided by the DDNS server.
                               hostTable 1.3.6.1.4.1.8691.2.8.1.5.1.4
                                   hostTableTable 1.3.6.1.4.1.8691.2.8.1.5.1.4.1 no-access
Host Table.
                                       hostTableEntry 1.3.6.1.4.1.8691.2.8.1.5.1.4.1.1 no-access
Host Table entry.
                                           hostTableIndex 1.3.6.1.4.1.8691.2.8.1.5.1.4.1.1.1 integer read-only
The Host Table index.
                                           hostName 1.3.6.1.4.1.8691.2.8.1.5.1.4.1.1.2 displaystring read-write
The host name of the host table entry.
                                           hostIpAddress 1.3.6.1.4.1.8691.2.8.1.5.1.4.1.1.3 ipaddress read-write
Related IP address of the host table entry.
                               routeTable 1.3.6.1.4.1.8691.2.8.1.5.1.5
                                   routeTableTable 1.3.6.1.4.1.8691.2.8.1.5.1.5.1 no-access
Route Table.
                                       routeTableEntry 1.3.6.1.4.1.8691.2.8.1.5.1.5.1.1 no-access
Route Table entry.
                                           routeTableIndex 1.3.6.1.4.1.8691.2.8.1.5.1.5.1.1.1 integer read-only
The Route Table index.
                                           gatewayRouteTable 1.3.6.1.4.1.8691.2.8.1.5.1.5.1.1.2 ipaddress read-write
The gateway property of the route table entry.
                                           destinationRouteTable 1.3.6.1.4.1.8691.2.8.1.5.1.5.1.1.3 ipaddress read-write
The destination IP address of the route table entry. This value can be the IP address of a single host if the netmask set to '255.255.255.255,' or it can be a network address.
                                           netmaskRouteTable 1.3.6.1.4.1.8691.2.8.1.5.1.5.1.1.4 ipaddress read-write
The destination netmask of the route table entry.
                                           metricRouteTable 1.3.6.1.4.1.8691.2.8.1.5.1.5.1.1.5 integer read-write
The routing metric for this route. The semantics of this metric are determined by the routing-protocol. Normally, it represents the cost for the destination.
                                           interfaceRouteTable 1.3.6.1.4.1.8691.2.8.1.5.1.5.1.1.6 integer read-write
The value that identifies the local interface through which the next hop of this route should be reached. Enumeration: 'port12': 11, 'lan': 256, 'port13': 12, 'port14': 13, 'port11': 10, 'port15': 14, 'port10': 9, 'port8': 7, 'port9': 8, 'port6': 5, 'port7': 6, 'port4': 3, 'port5': 4, 'port2': 1, 'port3': 2, 'port16': 15, 'port1': 0.
                               userTable 1.3.6.1.4.1.8691.2.8.1.5.1.6
                                   userTableTable 1.3.6.1.4.1.8691.2.8.1.5.1.6.1 no-access
User Table.
                                       userTableEntry 1.3.6.1.4.1.8691.2.8.1.5.1.6.1.1 no-access
User Table entry.
                                           userTableIndex 1.3.6.1.4.1.8691.2.8.1.5.1.6.1.1.1 integer read-only
The User Table index.
                                           userNameUserTable 1.3.6.1.4.1.8691.2.8.1.5.1.6.1.1.2 displaystring read-write
The user name of this entry.
                                           passwordUserTable 1.3.6.1.4.1.8691.2.8.1.5.1.6.1.1.3 displaystring read-write
The password of this user entry.
                                           phoneNumberUserTable 1.3.6.1.4.1.8691.2.8.1.5.1.6.1.1.4 displaystring read-write
The phone number of this user entry.
                               authenticationServer 1.3.6.1.4.1.8691.2.8.1.5.1.7
                                   radiusServerIp 1.3.6.1.4.1.8691.2.8.1.5.1.7.1 displaystring read-write
The IP address or domain name of the RADIUS server.
                                   radiusKey 1.3.6.1.4.1.8691.2.8.1.5.1.7.2 displaystring read-write
RADIUS password. Must be the same as in the RADIUS server.
                                   udpPortAuthenticationServer 1.3.6.1.4.1.8691.2.8.1.5.1.7.3 integer read-write
The UDP port of the RADIUS server. Enumeration: 'port1645': 1645, 'port1812': 1812.
                                   radiusAccounting 1.3.6.1.4.1.8691.2.8.1.5.1.7.4 integer read-write
Enable or disable RADIUS accounting. Enumeration: 'enable': 1, 'disable': 0.
                               sysLogSettings 1.3.6.1.4.1.8691.2.8.1.5.1.8
                                   sysLocalLog 1.3.6.1.4.1.8691.2.8.1.5.1.8.1 integer read-write
Log the following events to the system log: System Cold Start, System Warm Start. Enumeration: 'enable': 1, 'disable': 0.
                                   networkLocalLog 1.3.6.1.4.1.8691.2.8.1.5.1.8.2 integer read-write
Log the following events to the system log: DHCP/BOOTP/PPPoE Get IP/Renew, NTP, Mail Fail, NTP Connect Fail, DHCP Fail, IP Conflict, Ethernet Link Down. Enumeration: 'enable': 1, 'disable': 0.
                                   configLocalLog 1.3.6.1.4.1.8691.2.8.1.5.1.8.3 integer read-write
Log the following events to the system log: Login Fail, IP Changed, Password Changed, Config Changed, Firmware Upgrade, SSL Key Import, Config Import, Config Export. Enumeration: 'enable': 1, 'disable': 0.
                                   opModeLocalLog 1.3.6.1.4.1.8691.2.8.1.5.1.8.4 integer read-write
Log the following op-mode events to the system log: Connect, Disconnect, Authentication Fail, Restart. Enumeration: 'enable': 1, 'disable': 0.
                           autoWarningSettings 1.3.6.1.4.1.8691.2.8.1.5.2
                               eventSettings 1.3.6.1.4.1.8691.2.8.1.5.2.1
                                   mailWarningColdStart 1.3.6.1.4.1.8691.2.8.1.5.2.1.1 integer read-write
Refers to starting the system from power off (contrast this with warm start). When performing a cold start, the NPort 6000 series device server will automatically issue an auto warning message by e-mail after booting up. Enumeration: 'enable': 1, 'disable': 0.
                                   mailWarningWarmStart 1.3.6.1.4.1.8691.2.8.1.5.2.1.2 integer read-write
Refers to restarting the NPort 6000 without turning the power off. When performing a warm start, the NPort 6000 series device server will automatically send an e-mail after rebooting. Enumeration: 'enable': 1, 'disable': 0.
                                   mailWarningAuthFailure 1.3.6.1.4.1.8691.2.8.1.5.2.1.3 integer read-write
The user inputs a wrong password from the Console or Administrator. When authentication failure occurs, the NPort 6000 series device server will immediately send an e-mail. Enumeration: 'enable': 1, 'disable': 0.
                                   mailWarningIpChanged 1.3.6.1.4.1.8691.2.8.1.5.2.1.4 integer read-write
The user has changed the NPort 6000 series device server's IP address. When the IP address changes, the NPort 6000 series device server will send an e-mail with the new IP address before it reboots. If the NPort 6000 series device server is unable to send an e-mail message to the mail server within 15 seconds, it will reboot anyway, and abort the e-mail auto warning. Enumeration: 'enable': 1, 'disable': 0.
                                   mailWarningPasswordChanged 1.3.6.1.4.1.8691.2.8.1.5.2.1.5 integer read-write
The user has changed the NPort 6000 series device server's password. When the password changes, the NPort 6000 series device server will send an e-mail with the password changed notice before it reboots. If the NPort 6000 series device server is unable to send an e-mail message to the mail server within 15 seconds, it will reboot anyway, and abort the e-mail auto warning. Enumeration: 'enable': 1, 'disable': 0.
                                   trapServerColdStart 1.3.6.1.4.1.8691.2.8.1.5.2.1.6 integer read-write
Refers to starting the system from power off (contrast this with warm start). When performing a cold start, the NPort 6000 series device server will automatically issue an auto warning message by sending an SNMP trap after booting up. Enumeration: 'enable': 1, 'disable': 0.
                                   trapServerWarmStart 1.3.6.1.4.1.8691.2.8.1.5.2.1.7 integer read-write
Refers to restarting the NPort 6000 without turning the power off. When performing a warm start, the NPort 6000 series device server will automatically send an SNMP trap after rebooting. Enumeration: 'enable': 1, 'disable': 0.
                                   trapServerAuthFailure 1.3.6.1.4.1.8691.2.8.1.5.2.1.8 integer read-write
The user inputs a wrong password from the Console or Administrator. When authentication failure occurs, the NPort 6000 series device server will immediately send an SNMP trap. Enumeration: 'enable': 1, 'disable': 0.
                                   alarmServerEthernet1LinkDown 1.3.6.1.4.1.8691.2.8.1.5.2.1.9 integer read-write
When the built-in link1 port is off, the NPort 6000 series device server will automatically raise a d-out alarm. Enumeration: 'enable': 1, 'disable': 0.
                                   alarmServerEthernet2LinkDown 1.3.6.1.4.1.8691.2.8.1.5.2.1.10 integer read-write
The NPort 6000 series device server can provide an extra Ethernet port via the network module. When the first port on the network module is off, the NPort 6000 series device server will automatically raise a d-out alarm. Enumeration: 'enable': 1, 'disable': 0.
                                   alarmServerEthernet3LinkDown 1.3.6.1.4.1.8691.2.8.1.5.2.1.11 integer read-write
The NPort 6000 series device server can provide an extra Ethernet port via the network module. When the second port on the network module is off, the NPort 6000 series device server will automatically raise a d-out alarm. Enumeration: 'enable': 1, 'disable': 0.
                               serialEventSettings 1.3.6.1.4.1.8691.2.8.1.5.2.2
                                   portEventSettingsTable 1.3.6.1.4.1.8691.2.8.1.5.2.2.1 no-access
Port Event Settings Table.
                                       portEventSettingsEntry 1.3.6.1.4.1.8691.2.8.1.5.2.2.1.1 no-access
Port Event Settings entry.
                                           mailDCDchange 1.3.6.1.4.1.8691.2.8.1.5.2.2.1.1.1 integer read-write
A change in the DCD (Data Carrier Detect) signal indicates that the modem connection status has changed. For example, if the DCD signal changes to low, it indicates that the connection line is down. When the DCD signal changes to low, the NPort 6000 series device server will immediately send an e-mail message. Enumeration: 'enable': 1, 'disable': 0.
                                           trapDCDchange 1.3.6.1.4.1.8691.2.8.1.5.2.2.1.1.2 integer read-write
A change in the DCD (Data Carrier Detect) signal indicates that the modem connection status has changed. For example, if the DCD signal changes to low, it indicates that the connection line is down. When the DCD signal changes to low, the NPort 6000 series device server will immediately send an SNMP trap. Enumeration: 'enable': 1, 'disable': 0.
                                           alarmDCDchange 1.3.6.1.4.1.8691.2.8.1.5.2.2.1.1.3 integer read-write
A change in the DCD (Data Carrier Detect) signal indicates that the modem connection status has changed. For example, if the DCD signal changes to low, it indicates that the connection line is down. When the DCD signal changes to low, the NPort 6000 series device server will immediately raise a d-out alarm. Enumeration: 'enable': 1, 'disable': 0.
                                           mailDSRchange 1.3.6.1.4.1.8691.2.8.1.5.2.2.1.1.4 integer read-write
A change in the DSR (Data Set Ready) signal indicates that the data communication equipment is powered off. For example, if the DSR signal changes to low, it indicates that the data communication equipment is powered down. When the DSR signal changes to low, the NPort 6000 series device server will immediately send an e-mail message. Enumeration: 'enable': 1, 'disable': 0.
                                           trapDSRchange 1.3.6.1.4.1.8691.2.8.1.5.2.2.1.1.5 integer read-write
A change in the DSR (Data Set Ready) signal indicates that the data communication equipment is powered off. For example, if the DSR signal changes to low, it indicates that the data communication equipment is powered down. When the DSR signal changes to low, the NPort 6000 series device server will immediately send an SNMP trap. Enumeration: 'enable': 1, 'disable': 0.
                                           alarmDSRchange 1.3.6.1.4.1.8691.2.8.1.5.2.2.1.1.6 integer read-write
A change in the DSR (Data Set Ready) signal indicates that the data communication equipment is powered off. For example, if the DSR signal changes to low, it indicates that the data communication equipment is powered down. When the DSR signal changes to low, the NPort 6000 series device server will immediately raise a d-out alarm. Enumeration: 'enable': 1, 'disable': 0.
                               emailAlert 1.3.6.1.4.1.8691.2.8.1.5.2.3
                                   emailWarningMailServer 1.3.6.1.4.1.8691.2.8.1.5.2.3.1 displaystring read-write
The e-mail server's IP address or domain name of the e-mail warning function.
                                   emailRequiresAuthentication 1.3.6.1.4.1.8691.2.8.1.5.2.3.2 integer read-write
Set if the mail server requires user login. Enumeration: 'require': 1, 'non-require': 0.
                                   emailWarningUserName 1.3.6.1.4.1.8691.2.8.1.5.2.3.3 displaystring read-write
The user name used to log into the mail server if authentication is required.
                                   emailWarningPassword 1.3.6.1.4.1.8691.2.8.1.5.2.3.4 displaystring read-write
The password used to log into the mail server if authentication is required.
                                   emailWarningFromEmail 1.3.6.1.4.1.8691.2.8.1.5.2.3.5 displaystring read-write
The e-mail address to be filled in the 'From' field of the auto-warning e-mail.
                                   emailWarningFirstEmailAddr 1.3.6.1.4.1.8691.2.8.1.5.2.3.6 displaystring read-write
The first email address to where the auto-warning e-mail is to be sent.
                                   emailWarningSecondEmailAddr 1.3.6.1.4.1.8691.2.8.1.5.2.3.7 displaystring read-write
The second email address to where the auto-warning e-mail is to be sent.
                                   emailWarningThirdEmailAddr 1.3.6.1.4.1.8691.2.8.1.5.2.3.8 displaystring read-write
The third email address to where the auto-warning e-mail is to be sent.
                                   emailWarningFourthEmailAddr 1.3.6.1.4.1.8691.2.8.1.5.2.3.9 displaystring read-write
The fourth email address to where the auto-warning e-mail is to be sent.
                               snmpTrap 1.3.6.1.4.1.8691.2.8.1.5.2.4
                                   snmpTrapReceiverIp 1.3.6.1.4.1.8691.2.8.1.5.2.4.1 displaystring read-write
SNMP trap receiver IP address or domain name.
                                   trapVersion 1.3.6.1.4.1.8691.2.8.1.5.2.4.2 integer read-write
SNMP trap version used for the auto-warning function. Enumeration: 'v2c': 1, 'v1': 0.
                           maintenance 1.3.6.1.4.1.8691.2.8.1.5.3
                               consoleSettings 1.3.6.1.4.1.8691.2.8.1.5.3.1
                                   httpConsole 1.3.6.1.4.1.8691.2.8.1.5.3.1.1 integer read-write
Enable or disable HTTP console. Enumeration: 'enable': 0, 'disable': 1.
                                   httpsConsole 1.3.6.1.4.1.8691.2.8.1.5.3.1.2 integer read-write
Enable or disable HTTPS console. Enumeration: 'enable': 0, 'disable': 1.
                                   telnetConsole 1.3.6.1.4.1.8691.2.8.1.5.3.1.3 integer read-write
Enable or disable Telnet console. Enumeration: 'enable': 0, 'disable': 1.
                                   sshConsole 1.3.6.1.4.1.8691.2.8.1.5.3.1.4 integer read-write
Enable or disable SSH console. Enumeration: 'enable': 0, 'disable': 1.
                                   lcmReadOnlyProtect 1.3.6.1.4.1.8691.2.8.1.5.3.1.5 integer read-write
Enable or disable LCM read-only protection. If the LCM panel is under read-only protection, users can only view the configurations from the LCM panel. Otherwise, by default, users can modify the settings directly on the LCM panel. Enumeration: 'writable': 0, 'readonly': 1.
                                   resetButtonFunction 1.3.6.1.4.1.8691.2.8.1.5.3.1.6 integer read-write
Enable or disable reset button protection. You can disable the hardware reset button after the NPort 6000 series device server has been restarted for 60 seconds. Enumeration: 'always-enable': 0, 'disable-after-60-sec': 1.
                               loadFactoryDefault 1.3.6.1.4.1.8691.2.8.1.5.3.2
                                   loadFactoryDefaultSetting 1.3.6.1.4.1.8691.2.8.1.5.3.2.1 integer read-write
This function will reset all of the NPort 6000 series device server's settings to the factory default values. Be aware that previous settings will be lost. Selecting Reset to factory default (excluding IP configuration) will reset all settings except the IP configuration to factory defaults. Selecting Reset to factory default will reset all settings including the IP configuration to factory defaults. Enumeration: 'resetToFactoryDefault-ExcludingIpConfiguration': 0, 'resetToFactoryDefault': 1.
                       sysStatus 1.3.6.1.4.1.8691.2.8.1.6
                           s2eConnections 1.3.6.1.4.1.8691.2.8.1.6.1
                               monitorRemoteIpTable 1.3.6.1.4.1.8691.2.8.1.6.1.1 no-access
Serial to Network Connections Remote IP table.
                                   monitorRemoteIpEntry 1.3.6.1.4.1.8691.2.8.1.6.1.1.1 no-access
Serial to Network Connections Remote IP entry.
                                       remoteIpIndex 1.3.6.1.4.1.8691.2.8.1.6.1.1.1.1 integer read-only
Serial to Network Connections Remote IP index.
                                       monitorRemoteIp 1.3.6.1.4.1.8691.2.8.1.6.1.1.1.2 ipaddress read-only
The remote IP currently connecting to this port.
                           serialPortStatus 1.3.6.1.4.1.8691.2.8.1.6.2
                               monitorSerialPortStatusTable 1.3.6.1.4.1.8691.2.8.1.6.2.1 no-access
Serial Port Status table.
                                   monitorSerialPortStatusEntry 1.3.6.1.4.1.8691.2.8.1.6.2.1.1 no-access
Serial Port Status entry.
                                       monitorTxCount 1.3.6.1.4.1.8691.2.8.1.6.2.1.1.1 integer read-only
View the number of bytes transmitted from the port since the last time the port was initialized.
                                       monitorRxCount 1.3.6.1.4.1.8691.2.8.1.6.2.1.1.2 integer read-only
View the number of bytes received by the port since the last time the port was initialized.
                                       monitorTxTotalCount 1.3.6.1.4.1.8691.2.8.1.6.2.1.1.3 integer read-only
View the number of bytes transmitted from the port since the last time the system was initialized.
                                       monitorRxTotalCount 1.3.6.1.4.1.8691.2.8.1.6.2.1.1.4 integer read-only
View the number of bytes received by the port since the last time the system was initialized.
                                       monitorDSR 1.3.6.1.4.1.8691.2.8.1.6.2.1.1.5 integer read-only
View the current DSR status of this port. Enumeration: 'on': 1, 'off': 0.
                                       monitorDTR 1.3.6.1.4.1.8691.2.8.1.6.2.1.1.6 integer read-only
View the current DTR status of this port. Enumeration: 'on': 1, 'off': 0.
                                       monitorRTS 1.3.6.1.4.1.8691.2.8.1.6.2.1.1.7 integer read-only
View the current RTS status of this port. Enumeration: 'on': 1, 'off': 0.
                                       monitorCTS 1.3.6.1.4.1.8691.2.8.1.6.2.1.1.8 integer read-only
View the current CTS status of this port. Enumeration: 'on': 1, 'off': 0.
                                       monitorDCD 1.3.6.1.4.1.8691.2.8.1.6.2.1.1.9 integer read-only
View the current DCD status of this port. Enumeration: 'on': 1, 'off': 0.
                           serialPortErrorCount 1.3.6.1.4.1.8691.2.8.1.6.3
                               monitorSerialPortErrorCountTable 1.3.6.1.4.1.8691.2.8.1.6.3.1 no-access
Serial Port Error Count table.
                                   monitorSerialPortErrorCountEntry 1.3.6.1.4.1.8691.2.8.1.6.3.1.1 no-access
Serial Port Error Count entry.
                                       monitorErrorCountFrame 1.3.6.1.4.1.8691.2.8.1.6.3.1.1.1 integer read-only
View the number of 'Frame' errors for this port.
                                       monitorErrorCountParity 1.3.6.1.4.1.8691.2.8.1.6.3.1.1.2 integer read-only
View the number of 'Parity' errors for this port.
                                       monitorErrorCountOverrun 1.3.6.1.4.1.8691.2.8.1.6.3.1.1.3 integer read-only
View the number of 'Overrun' errors for this port.
                                       monitorErrorCountBreak 1.3.6.1.4.1.8691.2.8.1.6.3.1.1.4 integer read-only
View the number of 'Break' errors for this port.
                           serialPortSettings 1.3.6.1.4.1.8691.2.8.1.6.4
                               monitorSerialPortSettingsTable 1.3.6.1.4.1.8691.2.8.1.6.4.1 no-access
Serial Port Settings table.
                                   monitorSerialPortSettingsEntry 1.3.6.1.4.1.8691.2.8.1.6.4.1.1 no-access
Serial Port Settings entry.
                                       monitorBaudRate 1.3.6.1.4.1.8691.2.8.1.6.4.1.1.1 integer read-only
View the current baudrate of the port.
                                       monitorDataBits 1.3.6.1.4.1.8691.2.8.1.6.4.1.1.2 integer read-only
View the number of bits per byte for the port.
                                       monitorStopBits 1.3.6.1.4.1.8691.2.8.1.6.4.1.1.3 displaystring read-only
View the number of stop bits for the port.
                                       monitorParity 1.3.6.1.4.1.8691.2.8.1.6.4.1.1.4 integer read-only
View the parity bit for the port. Enumeration: 'even': 24, 'none': 0, 'space': 56, 'odd': 8, 'mark': 40.
                                       monitorRTSCTSFlowControl 1.3.6.1.4.1.8691.2.8.1.6.4.1.1.5 integer read-only
View if the port is using RTS/CTS flow control. Enumeration: 'on': 1, 'off': 0.
                                       monitorXONXOFFFlowControl 1.3.6.1.4.1.8691.2.8.1.6.4.1.1.6 integer read-only
View if the port is using XON/XOFF flow control. Enumeration: 'on': 1, 'off': 0.
                                       monitorDTRDSRFlowControl 1.3.6.1.4.1.8691.2.8.1.6.4.1.1.7 integer read-only
View if the port is using DTR/DSR flow control. Enumeration: 'on': 1, 'off': 0.
                                       monitorFIFO 1.3.6.1.4.1.8691.2.8.1.6.4.1.1.8 integer read-only
View FIFO status of this port. Enumeration: 'enable': 1, 'disable': 0.
                                       monitorInterface 1.3.6.1.4.1.8691.2.8.1.6.4.1.1.9 integer read-only
View the serial interface that the port is using. Enumeration: 'rs-422': 1, 'rs-232': 0, 'rs-485-4-wire': 3, 'rs-485-2-wire': 2.
                           relayOutputStatus 1.3.6.1.4.1.8691.2.8.1.6.5
                               relayOutputEthernet1LinkDown 1.3.6.1.4.1.8691.2.8.1.6.5.1 integer read-only
The relay dout status of the event that the built- in LAN port is off. Enumeration: 'none': 0, 'alarm-Acked': 2, 'alarm': 1.
                               ethernet1LinkDownAcknowledge 1.3.6.1.4.1.8691.2.8.1.6.5.2 integer read-write
Acknowledge the event that the built-in LAN port is off. Acknowledgement will clear the d-out alarm before you can actually fix the problem. Enumeration: 'acked': 0.
                               relayOutputEthernet2LinkDown 1.3.6.1.4.1.8691.2.8.1.6.5.3 integer read-only
The relay dout status of the event that the first LAN port of the network module is off. Enumeration: 'none': 0, 'alarm-Acked': 2, 'alarm': 1.
                               ethernet2LinkDownAcknowledge 1.3.6.1.4.1.8691.2.8.1.6.5.4 integer read-write
Acknowledge the event that the first LAN port of the network module is off. Acknowledgement will clear the d-out alarm before you can actually fix the problem. Enumeration: 'acked': 0.
                               relayOutputEthernet3LinkDown 1.3.6.1.4.1.8691.2.8.1.6.5.5 integer read-only
The relay dout status of the event that the second LAN port of the network module is off. Enumeration: 'none': 0, 'alarm-Acked': 2, 'alarm': 1.
                               ethernet3LinkDownAcknowledge 1.3.6.1.4.1.8691.2.8.1.6.5.6 integer read-write
Acknowledge the event that the second LAN port of the network module is off. Acknowledgement will clear the d-out alarm before you can actually fix the problem. Enumeration: 'acked': 0.
                               portDCDChangedStatusTable 1.3.6.1.4.1.8691.2.8.1.6.5.7 no-access
DCD changed table.
                                   portDCDChangedStatusEntry 1.3.6.1.4.1.8691.2.8.1.6.5.7.1 no-access
DCD changed entry.
                                       portDCDChangedStatus 1.3.6.1.4.1.8691.2.8.1.6.5.7.1.1 integer read-only
The relay dout status of the event that the DCD signal of the port is changed. Enumeration: 'none': 0, 'alarm-Acked': 2, 'alarm': 1.
                                       portDCDChangedAcknowledge 1.3.6.1.4.1.8691.2.8.1.6.5.7.1.2 integer read-write
Acknowledge the event that the DCD signal of the port is changed. Acknowledgement will clear the d-out alarm before you can actually fix the problem. Enumeration: 'acked': 0.
                               portDSRChangedStatusTable 1.3.6.1.4.1.8691.2.8.1.6.5.8 no-access
DSR changed Table.
                                   portDSRChangedStatusEntry 1.3.6.1.4.1.8691.2.8.1.6.5.8.1 no-access
DSR changed entry.
                                       portDSRChangedStatus 1.3.6.1.4.1.8691.2.8.1.6.5.8.1.1 integer read-only
The relay dout status of the event that the DSR signal of the port is changed. Enumeration: 'none': 0, 'alarm-Acked': 2, 'alarm': 1.
                                       portDSRChangedAcknowledge 1.3.6.1.4.1.8691.2.8.1.6.5.8.1.2 integer read-write
Acknowledge the event that the DSR signal of the port is changed. Acknowledgement will clear the d-out alarm before you can actually fix the problem. Enumeration: 'acked': 0.
                       saveConfiguration 1.3.6.1.4.1.8691.2.8.1.7
                           saveConfig 1.3.6.1.4.1.8691.2.8.1.7.1 integer read-write
Save the applied configuration to the NPort 6000 series device server. Enumeration: 'save': 1.
                       restart 1.3.6.1.4.1.8691.2.8.1.8
                           restartPorts 1.3.6.1.4.1.8691.2.8.1.8.1 integer read-write
Restart serial port. Restarting will cause port reseting. Enumeration: 'port12': 11, 'port13': 12, 'port14': 13, 'port11': 10, 'port15': 14, 'port10': 9, 'port8': 7, 'port9': 8, 'port6': 5, 'port7': 6, 'port4': 3, 'port5': 4, 'port2': 1, 'port3': 2, 'port16': 15, 'port1': 0.
                           restartSystem 1.3.6.1.4.1.8691.2.8.1.8.2 integer read-write
Restart the NPort 6000 series device server. Be sure to save all of your configuration changes before you restart the system. Otherwise, all of the changes will be lost. Enumeration: 'restart': 1.