MOXA-IKS6726A-MIB: View SNMP OID List / Download MIB

VENDOR: MOXA TECHNOLOGIES CO.


 Home MIB: MOXA-IKS6726A-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 moxa 1.3.6.1.4.1.8691
           industrialEthernet 1.3.6.1.4.1.8691.7
               iks6726A 1.3.6.1.4.1.8691.7.116
The MIB module for Moxa IKS-6726A series specific information.
                       mibNotificationsPrefix 1.3.6.1.4.1.8691.7.116.0
                           configChangeTrap 1.3.6.1.4.1.8691.7.116.0.1
The configuration has been changed.
                           power1Trap 1.3.6.1.4.1.8691.7.116.0.2
The power on/off changed.
                           power2Trap 1.3.6.1.4.1.8691.7.116.0.3
The power on/off changed.
                           trafficOverloadTrap 1.3.6.1.4.1.8691.7.116.0.4
The ethernet port's traffic loading exceeds the pre-defined value.
                           redundancyTopologyChangedTrap 1.3.6.1.4.1.8691.7.116.0.5
The redundancy topology has been changed.
                           turboRingCouplingPortChangedTrap 1.3.6.1.4.1.8691.7.116.0.6
The coupling path of Turbo Ring has been changed.
                           turboRingMasterChangedTrap 1.3.6.1.4.1.8691.7.116.0.7
The master of Turbo Ring has been changed.
                           poeWarningTrap 1.3.6.1.4.1.8691.7.116.0.16
The POE warning message.
                           portLoopDetectedTrap 1.3.6.1.4.1.8691.7.116.0.17
The DUT port is looping.
                           rateLimitedOnTrap 1.3.6.1.4.1.8691.7.116.0.18
The DUT port rate limit is ON.
                           lldpChgTrap 1.3.6.1.4.1.8691.7.116.0.19
The LLDP table is changing.
                           usbWarningTrap 1.3.6.1.4.1.8691.7.116.0.20
USB warning trap event.
                           turboRingMasterMismatchTrap 1.3.6.1.4.1.8691.7.116.0.22
The master of Turbo Ring has been mismatch.
                       swMgmt 1.3.6.1.4.1.8691.7.116.1
                           numberOfPorts 1.3.6.1.4.1.8691.7.116.1.1 integer read-only
Total Ports.
                           switchModel 1.3.6.1.4.1.8691.7.116.1.2 displaystring read-only
The switch model.
                           firmwareVersion 1.3.6.1.4.1.8691.7.116.1.4 displaystring read-only
The firmware version.
                           enableWebConfig 1.3.6.1.4.1.8691.7.116.1.5 integer read-write
This enable the Web. configuration function. Enumeration: 'httpsOnly': 2, 'disable': 0, 'httpOrHttps': 1.
                           enableTelnetConsole 1.3.6.1.4.1.8691.7.116.1.6 integer read-write
This enable telnet console. Enumeration: 'enable': 1, 'disable': 0.
                           lineSwapRecovery 1.3.6.1.4.1.8691.7.116.1.7 integer read-write
This enable line-swap-fast-recovery function. Enumeration: 'enable': 1, 'disable': 0.
                           networkSetting 1.3.6.1.4.1.8691.7.116.1.8
                               switchIpAddr 1.3.6.1.4.1.8691.7.116.1.8.1 ipaddress read-only
The IP Address of this switch.
                               switchIpMask 1.3.6.1.4.1.8691.7.116.1.8.2 ipaddress read-only
The netmask of this switch.
                               defaultGateway 1.3.6.1.4.1.8691.7.116.1.8.3 ipaddress read-only
The default gateway of this switch.
                               enableAutoIpConfig 1.3.6.1.4.1.8691.7.116.1.8.4 integer read-write
This enable the automatic IP address configuration function. Enumeration: 'enableBOOTP': 2, 'enableDHCP': 1, 'disable': 0.
                               dnsServer1IpAddr 1.3.6.1.4.1.8691.7.116.1.8.5 ipaddress read-write
The first DNS server's IP address
                               snmpTrapCommunity 1.3.6.1.4.1.8691.7.116.1.8.6 displaystring read-write
The SNMP trap community name
                               trapServerAddr 1.3.6.1.4.1.8691.7.116.1.8.7 displaystring read-write
The IP address/Domain name of SNMP trap server
                               dnsServer2IpAddr 1.3.6.1.4.1.8691.7.116.1.8.8 ipaddress read-write
The second DNS server's IP address
                               snmpReadCommunity 1.3.6.1.4.1.8691.7.116.1.8.9 displaystring read-write
The SNMP read community name
                               snmpTrap2Community 1.3.6.1.4.1.8691.7.116.1.8.11 displaystring read-write
The Second SNMP trap community name
                               trap2ServerAddr 1.3.6.1.4.1.8691.7.116.1.8.12 displaystring read-write
The IP address/Domain name of Second SNMP trap server
                               snmpInformEnable 1.3.6.1.4.1.8691.7.116.1.8.13 integer read-write
This enable the snmpInform function. Enumeration: 'enable': 1, 'disable': 0.
                               snmpInformRetries 1.3.6.1.4.1.8691.7.116.1.8.14 integer read-write
The snmp inform retry times of SNMP trap server
                               snmpInformTimeout 1.3.6.1.4.1.8691.7.116.1.8.15 integer read-write
The snmp inform interval of SNMP trap server
                               dhcpRetryPeriods 1.3.6.1.4.1.8691.7.116.1.8.16 integer read-write
The DHCP retry periods.
                               dhcpRetryTimes 1.3.6.1.4.1.8691.7.116.1.8.17 integer read-write
The dhcp retry times.
                               trapVersion 1.3.6.1.4.1.8691.7.116.1.8.18 integer read-write
Version of SNMP trap Enumeration: 'snmpv2-Notification': 1, 'snmpv2-Inform': 2, 'snmpv1-Trap': 0.
                           portSetting 1.3.6.1.4.1.8691.7.116.1.9
                               portTable 1.3.6.1.4.1.8691.7.116.1.9.1 no-access
The port table.
                                   portEntry 1.3.6.1.4.1.8691.7.116.1.9.1.1 no-access
The port entry.
                                       portIndex 1.3.6.1.4.1.8691.7.116.1.9.1.1.1 integer read-only
The port index.
                                       portDesc 1.3.6.1.4.1.8691.7.116.1.9.1.1.2 displaystring read-only
The port description
                                       portEnable 1.3.6.1.4.1.8691.7.116.1.9.1.1.3 integer read-write
This enable the port. Enumeration: 'enable': 1, 'disable': 0.
                                       portSpeed 1.3.6.1.4.1.8691.7.116.1.9.1.1.4 integer read-write
The port speed and duplex. Enumeration: 'speed10M-Full': 3, 'auto': 0, 'speed1000M-Full': 5, 'speed100M-Full': 1, 'speed10M-Half': 4, 'speed100M-Half': 2.
                                       portMDI 1.3.6.1.4.1.8691.7.116.1.9.1.1.5 integer read-write
The port MDI/MDIX. Enumeration: 'na': 0, 'mdi': 2, 'mdiX': 3, 'auto': 1.
                                       portFDXFlowCtrl 1.3.6.1.4.1.8691.7.116.1.9.1.1.6 integer read-write
The port FDX Flow Control Enumeration: 'enable': 1, 'disable': 0.
                                       portName 1.3.6.1.4.1.8691.7.116.1.9.1.1.7 displaystring read-write
The port Name
                           monitor 1.3.6.1.4.1.8691.7.116.1.10
                                 power1InputStatus 1.3.6.1.4.1.8691.7.116.1.10.1 integer read-only
The status of the first power input. Enumeration: 'present': 1, 'not-present': 0.
                                 power2InputStatus 1.3.6.1.4.1.8691.7.116.1.10.2 integer read-only
The status of the second power input. Enumeration: 'present': 1, 'not-present': 0.
                                 monitorPortTable 1.3.6.1.4.1.8691.7.116.1.10.3 no-access
The port table of monitor function.
                                     monitorPortEntry 1.3.6.1.4.1.8691.7.116.1.10.3.1 no-access
The port table entry of monitor function.
                                         monitorLinkStatus 1.3.6.1.4.1.8691.7.116.1.10.3.1.2 integer read-only
The port link status. Enumeration: 'on': 1, 'disable': -1, 'off': 0.
                                         monitorSpeed 1.3.6.1.4.1.8691.7.116.1.10.3.1.3 integer read-only
The port speed and duplex status. Enumeration: 'speed10M-Full': 1, 'speed1000M-Half': 4, 'na': -1, 'speed1000M-Full': 5, 'speed100M-Full': 3, 'speed10M-Half': 0, 'speed100M-Half': 2.
                                         monitorAutoMDI 1.3.6.1.4.1.8691.7.116.1.10.3.1.4 integer read-only
The port MDI/MDIX status. Enumeration: 'na': -1, 'mdi': 0, 'mdiX': 1.
                                         monitorTraffic 1.3.6.1.4.1.8691.7.116.1.10.3.1.5 integer read-only
The trafic loading percentage of port.
                                         monitorFDXFlowCtrl 1.3.6.1.4.1.8691.7.116.1.10.3.1.6 integer read-only
The Full-Duplex flow control status Enumeration: 'on': 1, 'off': 0.
                                         monitorTxTraffic 1.3.6.1.4.1.8691.7.116.1.10.3.1.7 integer read-only
The TX traffic loading percentage of port.
                                         monitorRxTraffic 1.3.6.1.4.1.8691.7.116.1.10.3.1.8 integer read-only
The RTX traffic loading percentage of port.
                                 monitorDiTable 1.3.6.1.4.1.8691.7.116.1.10.4 no-access
The DI table of monitor function.
                                     monitorDiEntry 1.3.6.1.4.1.8691.7.116.1.10.4.1 no-access
The DI table entry of monitor function.
                                         diIndex 1.3.6.1.4.1.8691.7.116.1.10.4.1.1 integer read-only
The DI index of monitor function
                                         diInputStatus 1.3.6.1.4.1.8691.7.116.1.10.4.1.2 integer read-only
The DI input status. Enumeration: 'on': 1, 'off': 0.
                                 monitorSFPTable 1.3.6.1.4.1.8691.7.116.1.10.7 no-access
The SFP table of monitor function.
                                     monitorSFPEntry 1.3.6.1.4.1.8691.7.116.1.10.7.1 no-access
The SFP table entry of monitor function.
                                         sfpPort 1.3.6.1.4.1.8691.7.116.1.10.7.1.1 displaystring read-only
The SFP index of monitor function
                                         sfpModelName 1.3.6.1.4.1.8691.7.116.1.10.7.1.2 displaystring read-only
The SFP ModelName of monitor function
                                         sfpTemperature 1.3.6.1.4.1.8691.7.116.1.10.7.1.3 displaystring read-only
The SFP Temperature(XC) of monitor function
                                         sfpVoltage 1.3.6.1.4.1.8691.7.116.1.10.7.1.4 displaystring read-only
The SFP Voltage(V) of monitor function
                                         sfpTxPower 1.3.6.1.4.1.8691.7.116.1.10.7.1.5 displaystring read-only
The SFP TX power(dBm) of monitor function
                                         sfpRxPower 1.3.6.1.4.1.8691.7.116.1.10.7.1.6 displaystring read-only
The SFP RX power(dBm) of monitor function
                                 powerConsumption 1.3.6.1.4.1.8691.7.116.1.10.8 displaystring read-only
Current power comsuption(Watts). Accurate to second decimal place.
                           emailWarning 1.3.6.1.4.1.8691.7.116.1.11
                                 emailService 1.3.6.1.4.1.8691.7.116.1.11.1
                                     emailWarningMailServer 1.3.6.1.4.1.8691.7.116.1.11.1.1 displaystring read-write
The email server's Ip Address/Domain name of email warning function.
                                     emailWarningFirstEmailAddr 1.3.6.1.4.1.8691.7.116.1.11.1.2 displaystring read-write
The first email address of email warning function.
                                     emailWarningSecondEmailAddr 1.3.6.1.4.1.8691.7.116.1.11.1.3 displaystring read-write
The second email address of email warning function.
                                     emailWarningThirdEmailAddr 1.3.6.1.4.1.8691.7.116.1.11.1.4 displaystring read-write
The third email address of email warning function.
                                     emailWarningFourthEmailAddr 1.3.6.1.4.1.8691.7.116.1.11.1.5 displaystring read-write
The fourth email address of email warning function.
                                     emailWarningSMTPPort 1.3.6.1.4.1.8691.7.116.1.11.1.6 integer read-write
The email server's SMTP port of email warning function.
                           setDeviceIp 1.3.6.1.4.1.8691.7.116.1.12
                                 setDevIpTable 1.3.6.1.4.1.8691.7.116.1.12.1 no-access
The set devvice IP table.
                                     setDevIpEntry 1.3.6.1.4.1.8691.7.116.1.12.1.1 no-access
The set devvice IP table entry.
                                         setDevIpIndex 1.3.6.1.4.1.8691.7.116.1.12.1.1.1 integer read-only
The set devvice IP index.
                                         setDevIpCurrentIpofDevice 1.3.6.1.4.1.8691.7.116.1.12.1.1.2 displaystring read-only
The current IP address of connected to this port.
                                         setDevIpPresentBy 1.3.6.1.4.1.8691.7.116.1.12.1.1.3 integer read-only
The protocol used that assigning IP to the device. Enumeration: 'rarp': 2, 'dhcpClient': 1, 'bootp': 4, 'no': 0.
                                         setDevIpDedicatedIp 1.3.6.1.4.1.8691.7.116.1.12.1.1.4 ipaddress read-write
The IP address when assign to the device connected to this port.
                           mirroring 1.3.6.1.4.1.8691.7.116.1.13
                                 targetPort 1.3.6.1.4.1.8691.7.116.1.13.1 integer read-write
The mirrored port of mirroring function.
                                 mirroringPort 1.3.6.1.4.1.8691.7.116.1.13.2 integer read-write
The mirroring port of mirroring function.
                                 monitorDirection 1.3.6.1.4.1.8691.7.116.1.13.3 integer read-write
The traffic direction of mirroring function. Enumeration: 'biDirectional': 2, 'inputDataStream': 0, 'outputDataStream': 1.
                           portTrunking 1.3.6.1.4.1.8691.7.116.1.14
                                 trunkSettingTable 1.3.6.1.4.1.8691.7.116.1.14.1 no-access
Port Trunking Setting Table.
                                     trunkSettingEntry 1.3.6.1.4.1.8691.7.116.1.14.1.1 no-access
Port Trunking Setting Entry.
                                         trunkSettingIndex 1.3.6.1.4.1.8691.7.116.1.14.1.1.1 integer read-only
Trunking Group Index.
                                         trunkType 1.3.6.1.4.1.8691.7.116.1.14.1.1.2 integer read-write
Trunking Group Type. Enumeration: 'lacp': 2, 'static': 1.
                                         trunkMemberPorts 1.3.6.1.4.1.8691.7.116.1.14.1.1.3 portlist read-write
Trunking Group Member Ports.
                                 trunkTable 1.3.6.1.4.1.8691.7.116.1.14.2 no-access
Port Trunking Table.
                                     trunkEntry 1.3.6.1.4.1.8691.7.116.1.14.2.1 no-access
Port Trunking Entry.
                                         trunkIndex 1.3.6.1.4.1.8691.7.116.1.14.2.1.1 integer read-only
Trunking Group Index.
                                         trunkPort 1.3.6.1.4.1.8691.7.116.1.14.2.1.2 integer read-only
Trunking Group Member Port.
                                         trunkStatus 1.3.6.1.4.1.8691.7.116.1.14.2.1.3 integer read-only
Trunking Port Status. Enumeration: 'fail': 2, 'standby': 3, 'success': 1.
                           commRedundancy 1.3.6.1.4.1.8691.7.116.1.16
                                 protocolOfRedundancySetup 1.3.6.1.4.1.8691.7.116.1.16.1 integer read-write
This set the redundancy protocol of this switch. Enumeration: 'turboRingV2': 3, 'spanningTree': 1, 'turboRing': 2, 'mstp': 5, 'turboChain': 4.
                                 turboRing 1.3.6.1.4.1.8691.7.116.1.16.2
                                     turboRingMaster 1.3.6.1.4.1.8691.7.116.1.16.2.1 integer read-only
Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0.
                                     turboRingMasterSetup 1.3.6.1.4.1.8691.7.116.1.16.2.2 integer read-write
Set this to be Master. Enumeration: 'yes': 1, 'no': 0.
                                     turboRingPortTable 1.3.6.1.4.1.8691.7.116.1.16.2.3 no-access
Turbo Ring Port Table.
                                         turboRingPortEntry 1.3.6.1.4.1.8691.7.116.1.16.2.3.1 no-access
Turbo Ring Port Entry.
                                             turboRingPortIndex 1.3.6.1.4.1.8691.7.116.1.16.2.3.1.1 integer read-only
Turbo Ring Port Index.
                                             turboRingPortStatus 1.3.6.1.4.1.8691.7.116.1.16.2.3.1.2 integer read-only
Turbo Ring Port Status. Enumeration: 'portDisabled': 0, 'linkDown': 2, 'learning': 4, 'forwarding': 5, 'notTurboRingPort': 1, 'blocked': 3.
                                             turboRingPortDesignatedBridge 1.3.6.1.4.1.8691.7.116.1.16.2.3.1.3 macaddress read-only
The MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment.
                                             turboRingPortDesignatedPort 1.3.6.1.4.1.8691.7.116.1.16.2.3.1.4 integer read-only
The Port Number of the port on the Designated Bridge for this port's segment.
                                     turboRingDesignatedMaster 1.3.6.1.4.1.8691.7.116.1.16.2.6 macaddress read-only
The MAC address of the bridge which is the Master of the TURBO RING.
                                     turboRingRdntPort1 1.3.6.1.4.1.8691.7.116.1.16.2.7 integer read-write
The port number of 1st Redundant Port on the TURBO RING.
                                     turboRingRdntPort2 1.3.6.1.4.1.8691.7.116.1.16.2.8 integer read-write
The port number of 2nd Redundant Port on the TURBO RING.
                                     turboRingEnableCoupling 1.3.6.1.4.1.8691.7.116.1.16.2.9 integer read-write
This enable the ring coupling function. Enumeration: 'enable': 1, 'disable': 0.
                                     turboRingCouplingPort 1.3.6.1.4.1.8691.7.116.1.16.2.10 integer read-write
The coupling port of ring coupling function.
                                     turboRingCouplingPortStatus 1.3.6.1.4.1.8691.7.116.1.16.2.11 integer read-only
The coupling port status of ring coupling function. Enumeration: 'notCouplingPort': 1, 'forwarding': 5, 'linkDown': 2, 'portDisabled': 0, 'blocked': 3.
                                     turboRingControlPort 1.3.6.1.4.1.8691.7.116.1.16.2.12 integer read-write
The control port of ring coupling function.
                                     turboRingControlPortStatus 1.3.6.1.4.1.8691.7.116.1.16.2.13 integer read-only
The control port status of ring coupling function. Enumeration: 'portDisabled': 0, 'linkDown': 2, 'inactive': 6, 'active': 7, 'notControlPort': 1, 'forwarding': 5, 'blocked': 3.
                                     turboRingBrokenStatus 1.3.6.1.4.1.8691.7.116.1.16.2.14 integer read-only
Turbo Ring broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1.
                                 spanningTree 1.3.6.1.4.1.8691.7.116.1.16.3
                                     spanningTreeRoot 1.3.6.1.4.1.8691.7.116.1.16.3.1 integer read-only
The root of spanning tree. Enumeration: 'yes': 1, 'no': 0.
                                     spanningTreeBridgePriority 1.3.6.1.4.1.8691.7.116.1.16.3.2 integer read-write
The bridge priority of spanning tree protocol. Enumeration: 'priority4096': 4096, 'priority40960': 40960, 'priority32768': 32768, 'priority24576': 24576, 'priority36864': 36864, 'priority20480': 20480, 'priority12288': 12288, 'priority8192': 8192, 'priority0': 0, 'priority57344': 57344, 'priority49152': 49152, 'priority45056': 45056, 'priority61440': 61440, 'priority53248': 53248, 'priority28672': 28672, 'priority16384': 16384.
                                     spanningTreeHelloTime 1.3.6.1.4.1.8691.7.116.1.16.3.3 integer read-write
The hello time of spanning tree protocol.
                                     spanningTreeMaxAge 1.3.6.1.4.1.8691.7.116.1.16.3.4 integer read-write
The max. age of spanning tree protocol.
                                     spanningTreeForwardingDelay 1.3.6.1.4.1.8691.7.116.1.16.3.5 integer read-write
Tje forwarding delay of spanning tree protocol.
                                     spanningTreeTable 1.3.6.1.4.1.8691.7.116.1.16.3.6 no-access
The spanning tree table.
                                         spanningTreeEntry 1.3.6.1.4.1.8691.7.116.1.16.3.6.1 no-access
The spanning tree port entry.
                                             spanningTreeIndex 1.3.6.1.4.1.8691.7.116.1.16.3.6.1.1 integer read-only
The index of spanning tree table.
                                             enableSpanningTree 1.3.6.1.4.1.8691.7.116.1.16.3.6.1.2 integer read-write
This enable of spanning tree protocol for this port. Enumeration: 'enable': 1, 'disable': 0.
                                             spanningTreePortPriority 1.3.6.1.4.1.8691.7.116.1.16.3.6.1.3 integer read-write
The port priority of spanning tree protocol. Enumeration: 'priority144': 144, 'priority224': 224, 'priority64': 64, 'priority48': 48, 'priority32': 32, 'priority80': 80, 'priority112': 112, 'priority160': 160, 'priority96': 96, 'priority0': 0, 'priority208': 208, 'priority240': 240, 'priority16': 16, 'priority128': 128, 'priority192': 192, 'priority176': 176.
                                             spanningTreePortCost 1.3.6.1.4.1.8691.7.116.1.16.3.6.1.4 integer read-write
The port cost of spanning tree protocol.
                                             spanningTreePortStatus 1.3.6.1.4.1.8691.7.116.1.16.3.6.1.5 integer read-only
The port status of spanning tree protocol. Enumeration: 'portDisabled': 0, 'notSpanningTreePort': 1, 'linkDown': 2, 'learning': 4, 'forwarding': 5, 'blocked': 3.
                                             spanningTreePortEdge 1.3.6.1.4.1.8691.7.116.1.16.3.6.1.6 integer read-write
This configures the Edge Port property for this port. Enumeration: 'auto': 0, 'forceEdge': 1, 'false': 2.
                                 activeProtocolOfRedundancy 1.3.6.1.4.1.8691.7.116.1.16.4 integer read-only
This shows the active redundancy protocol of this switch now. The none(0) stauts will be showed if only if the switch's redundancy protocol is set to spanning tree and none of ports enable spanning tree. Enumeration: 'none': 0, 'turboRingV2': 3, 'turboRing': 2, 'mstp': 5, 'spanningTree': 1, 'turboChain': 4.
                                 turboRingV2 1.3.6.1.4.1.8691.7.116.1.16.5
                                     turboRingV2Ring1 1.3.6.1.4.1.8691.7.116.1.16.5.1
                                         ringIndexRing1 1.3.6.1.4.1.8691.7.116.1.16.5.1.1 integer read-only
The turboRingV2 Ring Index.
                                         ringEnableRing1 1.3.6.1.4.1.8691.7.116.1.16.5.1.2 integer read-write
The turboRingV2 Ring1 Enalbe Config. Enumeration: 'enable': 1, 'disable': 0.
                                         masterSetupRing1 1.3.6.1.4.1.8691.7.116.1.16.5.1.3 integer read-write
Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0.
                                         masterStatusRing1 1.3.6.1.4.1.8691.7.116.1.16.5.1.4 integer read-only
Set this to be Master. Enumeration: 'yes': 1, 'no': 0.
                                         designatedMasterRing1 1.3.6.1.4.1.8691.7.116.1.16.5.1.5 macaddress read-only
The MAC address of the bridge which is the Master of the turboRingV2.
                                         rdnt1stPortRing1 1.3.6.1.4.1.8691.7.116.1.16.5.1.6 integer read-write
The port number of 1st Redundant Port on the turboRingV2.
                                         rdnt1stPortStatusRing1 1.3.6.1.4.1.8691.7.116.1.16.5.1.7 integer read-only
The status of 1st Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
                                         rdnt2ndPortRing1 1.3.6.1.4.1.8691.7.116.1.16.5.1.8 integer read-write
The port number of 2nd Redundant Port on the turboRingV2.
                                         rdnt2ndPortStatusRing1 1.3.6.1.4.1.8691.7.116.1.16.5.1.9 integer read-only
The status of 2nd Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
                                         brokenStatusRing1 1.3.6.1.4.1.8691.7.116.1.16.5.1.10 integer read-only
turboRingV2 broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1.
                                     turboRingV2Ring2 1.3.6.1.4.1.8691.7.116.1.16.5.2
                                         ringIndexRing2 1.3.6.1.4.1.8691.7.116.1.16.5.2.1 integer read-only
The turboRingV2 Ring Index.
                                         ringEnableRing2 1.3.6.1.4.1.8691.7.116.1.16.5.2.2 integer read-write
The turboRingV2 Ring2 Enalbe Config. Enumeration: 'enable': 1, 'disable': 0.
                                         masterSetupRing2 1.3.6.1.4.1.8691.7.116.1.16.5.2.3 integer read-write
Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0.
                                         masterStatusRing2 1.3.6.1.4.1.8691.7.116.1.16.5.2.4 integer read-only
Set this to be Master. Enumeration: 'yes': 1, 'no': 0.
                                         designatedMasterRing2 1.3.6.1.4.1.8691.7.116.1.16.5.2.5 macaddress read-only
The MAC address of the bridge which is the Master of the turboRingV2.
                                         rdnt1stPortRing2 1.3.6.1.4.1.8691.7.116.1.16.5.2.6 integer read-write
The port number of 1st Redundant Port on the turboRingV2.
                                         rdnt1stPortStatusRing2 1.3.6.1.4.1.8691.7.116.1.16.5.2.7 integer read-only
The status of 1st Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
                                         rdnt2ndPortRing2 1.3.6.1.4.1.8691.7.116.1.16.5.2.8 integer read-write
The port number of 2nd Redundant Port on the turboRingV2.
                                         rdnt2ndPortStatusRing2 1.3.6.1.4.1.8691.7.116.1.16.5.2.9 integer read-only
The status of 2nd Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
                                         brokenStatusRing2 1.3.6.1.4.1.8691.7.116.1.16.5.2.10 integer read-only
turboRingV2 broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1.
                                     turboRingV2Coupling 1.3.6.1.4.1.8691.7.116.1.16.5.3
                                         couplingEnable 1.3.6.1.4.1.8691.7.116.1.16.5.3.1 integer read-write
Setting the ring coupling enable. Enumeration: 'enable': 1, 'disable': 0.
                                         couplingMode 1.3.6.1.4.1.8691.7.116.1.16.5.3.2 integer read-write
Setting the ring coupling mode. Enumeration: 'couplingBackup': 2, 'couplingPrimary': 3, 'dualHoming': 1.
                                         coupling1stPort 1.3.6.1.4.1.8691.7.116.1.16.5.3.3 integer read-write
If in 'DUAL HOMING' mode,port name is 'Primary port',If in 'COUPLING' mode,port name is 'Coupling port'
                                         coupling1stPortStatus 1.3.6.1.4.1.8691.7.116.1.16.5.3.4 integer read-only
The 1st coupling port status of coupling function. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
                                         coupling2ndPort 1.3.6.1.4.1.8691.7.116.1.16.5.3.5 integer read-write
If in 'DUAL HOMING' mode,port name is 'Backup port',If in 'COUPLING' mode,port name is no used.
                                         coupling2ndPortStatus 1.3.6.1.4.1.8691.7.116.1.16.5.3.6 integer read-only
The 2nd coupling port status of coupling function. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1.
                                 turboChain 1.3.6.1.4.1.8691.7.116.1.16.6
                                     turboChainRole 1.3.6.1.4.1.8691.7.116.1.16.6.1 integer read-write
The Role of TURBO CHAIN. Enumeration: 'member': 2, 'head': 1, 'tail': 3.
                                     turboChainPort1 1.3.6.1.4.1.8691.7.116.1.16.6.2 integer read-write
The port number of 1st Redundant Port on the TURBO CHAIN. If switch role is Turbo Chain Head, this is Head port, If Switch role is Turbo Chain Tail, this is Tail port.
                                     turboChainPort2 1.3.6.1.4.1.8691.7.116.1.16.6.3 integer read-write
The port number of 2nd Redundant Port on the TURBO CHAIN. It is the member port of TurboChain
                                     turboChainPort1Status 1.3.6.1.4.1.8691.7.116.1.16.6.4 integer read-only
Turbo Chain Port Status. Enumeration: 'na': 5, 'linkDown': 1, 'notTurboChainPort': 0, 'forwarding': 4, 'blocking': 2, 'blocked': 3.
                                     turboChainPort2Status 1.3.6.1.4.1.8691.7.116.1.16.6.5 integer read-only
Turbo Chain Port Status. Enumeration: 'na': 5, 'linkDown': 1, 'notTurboChainPort': 0, 'forwarding': 4, 'blocking': 2, 'blocked': 3.
                                     turboChainPort1PartnerBridge 1.3.6.1.4.1.8691.7.116.1.16.6.6 macaddress read-only
The MAC address of the next bridge
                                     turboChainPort2PartnerBridge 1.3.6.1.4.1.8691.7.116.1.16.6.7 macaddress read-only
The MAC address of the neighbor Turbo Chain switch
                           trafficPrioritization 1.3.6.1.4.1.8691.7.116.1.18
                                 qosClassification 1.3.6.1.4.1.8691.7.116.1.18.1
                                     queuingMechanism 1.3.6.1.4.1.8691.7.116.1.18.1.1 integer read-write
The queuing mechanism. Enumeration: 'schedweightfair': 0, 'schedstrict': 1.
                                     qosPortTable 1.3.6.1.4.1.8691.7.116.1.18.1.2 no-access
The QoS port table.
                                         qosPortEntry 1.3.6.1.4.1.8691.7.116.1.18.1.2.1 no-access
The QoS Port Entry.
                                             inspectTos 1.3.6.1.4.1.8691.7.116.1.18.1.2.1.1 integer read-write
This enable the inspection of ToS field. Enumeration: 'yes': 1, 'no': 0.
                                             inspectCos 1.3.6.1.4.1.8691.7.116.1.18.1.2.1.2 integer read-write
This enable the inspection of CoS field. Enumeration: 'yes': 1, 'no': 0.
                                             portPriority 1.3.6.1.4.1.8691.7.116.1.18.1.2.1.3 integer read-write
The deault priority of the port. Enumeration: 'priority1': 1, 'priority0': 0, 'priority3': 3, 'priority2': 2, 'priority5': 5, 'priority4': 4, 'priority7': 7, 'priority6': 6.
                                 cosMapping 1.3.6.1.4.1.8691.7.116.1.18.2
                                     cosMappingTable 1.3.6.1.4.1.8691.7.116.1.18.2.1 no-access
The COS mapping table.
                                         cosMappingEntry 1.3.6.1.4.1.8691.7.116.1.18.2.1.1 no-access
The COS mapping Entry.
                                             cosTag 1.3.6.1.4.1.8691.7.116.1.18.2.1.1.1 integer read-only
The cos tag of TOS field.
                                             cosMappedPriority 1.3.6.1.4.1.8691.7.116.1.18.2.1.1.2 integer read-write
The frame's priority corresponding to it's COS tag value. Enumeration: 'TrafficClass2': 2, 'TrafficClass3': 3, 'TrafficClass0': 0, 'TrafficClass1': 1.
                                 tosMapping 1.3.6.1.4.1.8691.7.116.1.18.3
                                     tosMappingTable 1.3.6.1.4.1.8691.7.116.1.18.3.1 no-access
The TOS mapping table.
                                         tosMappingEntry 1.3.6.1.4.1.8691.7.116.1.18.3.1.1 no-access
TOS mapping Entry.
                                             tosClass 1.3.6.1.4.1.8691.7.116.1.18.3.1.1.1 integer read-only
The TOS class of TOS field.
                                             tosMappedPriority 1.3.6.1.4.1.8691.7.116.1.18.3.1.1.2 integer read-write
The frame's priority corresponding to it's TOS class value. Enumeration: 'priority1': 1, 'priority0': 0, 'priority3': 3, 'priority2': 2, 'priority5': 5, 'priority4': 4, 'priority7': 7, 'priority6': 6.
                           vlan 1.3.6.1.4.1.8691.7.116.1.19
                                 vlanPortSettingTable 1.3.6.1.4.1.8691.7.116.1.19.1 no-access
The vlan seting table of ports.
                                     vlanPortSettingEntry 1.3.6.1.4.1.8691.7.116.1.19.1.1 no-access
Port Setting Entry of VLAN.
                                         portVlanType 1.3.6.1.4.1.8691.7.116.1.19.1.1.1 integer read-write
The vlan type of port. Enumeration: 'access': 0, 'hybrid': 2, 'trunk': 1.
                                         portDefaultVid 1.3.6.1.4.1.8691.7.116.1.19.1.1.2 integer read-write
The PVID of port.
                                         portFixedVid 1.3.6.1.4.1.8691.7.116.1.19.1.1.3 displaystring read-write
The fixed vids of (trunk) port.
                                         portForbiddenVid 1.3.6.1.4.1.8691.7.116.1.19.1.1.4 displaystring read-write
The forbidden vids of (trunk)port.
                                         portFixedVidUntag 1.3.6.1.4.1.8691.7.116.1.19.1.1.5 displaystring read-write
The fixed untag vids of (trunk) port.
                                 vlanTable 1.3.6.1.4.1.8691.7.116.1.19.2 no-access
The VLAN table.
                                     vlanEntry 1.3.6.1.4.1.8691.7.116.1.19.2.1 no-access
VLAN Entry.
                                         vlanId 1.3.6.1.4.1.8691.7.116.1.19.2.1.1 integer read-only
The VLAN id.
                                         joinedAccessPorts 1.3.6.1.4.1.8691.7.116.1.19.2.1.2 portlist read-only
The access ports that joined this VID.
                                         joinedTrunkPorts 1.3.6.1.4.1.8691.7.116.1.19.2.1.3 portlist read-only
The trunk ports that joined this VID.
                                         joinedHybridPorts 1.3.6.1.4.1.8691.7.116.1.19.2.1.4 portlist read-only
The hybrid ports that joined this VID.
                                 managementVlanId 1.3.6.1.4.1.8691.7.116.1.19.3 integer read-write
The management VLAN id.
                                 vlanType 1.3.6.1.4.1.8691.7.116.1.19.4 integer read-write
VLAN Type. Enumeration: 'tagBased': 0, 'portBased': 1.
                                 portbaseVlanSettingTable 1.3.6.1.4.1.8691.7.116.1.19.5 no-access
Port base Vlan Setting Table.
                                     portbaseVlanSettingEntry 1.3.6.1.4.1.8691.7.116.1.19.5.1 no-access
Port base Vlan Setting Entry.
                                         portbaseVlanSettingIndex 1.3.6.1.4.1.8691.7.116.1.19.5.1.1 integer read-only
port base Vlan Group Index.
                                         portbaseVlanMemberPorts 1.3.6.1.4.1.8691.7.116.1.19.5.1.2 portlist read-write
port base Vlan Group Member Ports.
                                 enableGvrp 1.3.6.1.4.1.8691.7.116.1.19.6 integer read-write
Enable GVRP. Enumeration: 'enable': 1, 'disable': 0.
                           multicastFiltering 1.3.6.1.4.1.8691.7.116.1.20
                                 igmpSnooping 1.3.6.1.4.1.8691.7.116.1.20.1
                                     querierQueryInterval 1.3.6.1.4.1.8691.7.116.1.20.1.1 integer read-write
This query interval of the querier function for this VLAN.
                                     igmpSnoopingSettingTable 1.3.6.1.4.1.8691.7.116.1.20.1.2 no-access
The IGMP snooping setting table.
                                         igmpSnoopingSettingEntry 1.3.6.1.4.1.8691.7.116.1.20.1.2.1 no-access
The IGMP snooping setting Entry.
                                             enableIgmpSnooping 1.3.6.1.4.1.8691.7.116.1.20.1.2.1.1 integer read-write
This enable the IGMP snooping functon in this VLAN. Enumeration: 'enable': 1, 'disable': 0.
                                             enableQuerier 1.3.6.1.4.1.8691.7.116.1.20.1.2.1.2 integer read-write
This enable the querier function for this VLAN. Enumeration: 'igmpv3': 2, 'igmpv2': 1, 'disable': 0.
                                             fixedMulticastQuerierPorts 1.3.6.1.4.1.8691.7.116.1.20.1.2.1.3 portlist read-write
The ports that multicast-Querier exist.
                                             learnedMulticastQuerierPorts 1.3.6.1.4.1.8691.7.116.1.20.1.2.1.4 portlist read-only
The ports that multicast-Querier exist.
                                     enableGlobalIgmpSnooping 1.3.6.1.4.1.8691.7.116.1.20.1.4 integer read-write
This enable the IGMP snooping functon . Enumeration: 'enable': 1, 'disable': 0.
                                     multicastFastForwarding 1.3.6.1.4.1.8691.7.116.1.20.1.7 integer read-write
This Enable Multicast Fast Forwarding Mode functon . Enumeration: 'enable': 1, 'disable': 0.
                                 staticMulticast 1.3.6.1.4.1.8691.7.116.1.20.2
                                     staticMulticastTable 1.3.6.1.4.1.8691.7.116.1.20.2.1 no-access
The static multicast table.
                                         staticMulticastEntry 1.3.6.1.4.1.8691.7.116.1.20.2.1.1 no-access
Static multicast Entry.
                                             staticMulticastAddress 1.3.6.1.4.1.8691.7.116.1.20.2.1.1.1 macaddress read-only
The static multicast address.
                                             staticMulticastPorts 1.3.6.1.4.1.8691.7.116.1.20.2.1.1.2 portlist read-only
The port map of the static multicast address.
                                             staticMulticastStatus 1.3.6.1.4.1.8691.7.116.1.20.2.1.1.3 integer read-only
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5.
                                 gmrp 1.3.6.1.4.1.8691.7.116.1.20.3
                                     gmrpSettingTable 1.3.6.1.4.1.8691.7.116.1.20.3.1 no-access
The GMRP setting table.
                                         gmrpSettingEntry 1.3.6.1.4.1.8691.7.116.1.20.3.1.1 no-access
The GMRP Setting Entry.
                                             enableGMRP 1.3.6.1.4.1.8691.7.116.1.20.3.1.1.1 integer read-write
Enable/Disable GMRP. Enumeration: 'enable': 1, 'disable': 0.
                                     gmrpTable 1.3.6.1.4.1.8691.7.116.1.20.3.2 no-access
The GMRP status table.
                                         gmrpEntry 1.3.6.1.4.1.8691.7.116.1.20.3.2.1 no-access
The GMRP Status Entry.
                                             gmrpMulticastGroup 1.3.6.1.4.1.8691.7.116.1.20.3.2.1.1 macaddress read-only
GMRP multicast group.
                                             gmrpFixedPorts 1.3.6.1.4.1.8691.7.116.1.20.3.2.1.2 portlist read-only
The ports that joined GMRP multicast group manually.
                                             gmrpLearnedPorts 1.3.6.1.4.1.8691.7.116.1.20.3.2.1.3 portlist read-only
The ports that joined GMRP multicast group by GMRP learning.
                                 mfb 1.3.6.1.4.1.8691.7.116.1.20.4
                                     mfbSettingTable 1.3.6.1.4.1.8691.7.116.1.20.4.1 no-access
The Multicast Filtering Behavior setting table.
                                         mfbSettingEntry 1.3.6.1.4.1.8691.7.116.1.20.4.1.1 no-access
The Multicast Filtering Behavior Setting Entry.
                                             filterBehavior 1.3.6.1.4.1.8691.7.116.1.20.4.1.1.1 integer read-write
Port forward multicast packet behavior. Enumeration: 'forwardUnknown': 2, 'filterUnknown': 3.
                           rateLimiting 1.3.6.1.4.1.8691.7.116.1.21
                                 normalModeRateLimitingTable 1.3.6.1.4.1.8691.7.116.1.21.1 no-access
The rate limiting table.
                                     normalModeRateLimitingEntry 1.3.6.1.4.1.8691.7.116.1.21.1.1 no-access
Rate limiting Entry.
                                         ingressLimitRate 1.3.6.1.4.1.8691.7.116.1.21.1.1.1 integer read-write
The ingress limit mode. Enumeration: 'percentage85': 9, 'percentage65': 8, 'percentage03': 1, 'percentage35': 6, 'notlimited': 0, 'percentage50': 7, 'percentage05': 2, 'percentage15': 4, 'percentage25': 5, 'percentage10': 3.
                                         egressLimit 1.3.6.1.4.1.8691.7.116.1.21.1.1.2 integer read-write
The ingress limit mode. Enumeration: 'percentage85': 9, 'percentage65': 8, 'percentage03': 1, 'percentage35': 6, 'notlimited': 0, 'percentage50': 7, 'percentage05': 2, 'percentage15': 4, 'percentage25': 5, 'percentage10': 3.
                                 broadcastStormProtection 1.3.6.1.4.1.8691.7.116.1.21.2
                                     enableBcastStormProtection 1.3.6.1.4.1.8691.7.116.1.21.2.1 integer read-write
Enable Broadcast Storm Protection Enumeration: 'enable': 1, 'disable': 0.
                                     bcastStormIncludeMcast 1.3.6.1.4.1.8691.7.116.1.21.2.2 integer read-write
Broadcast Storm Protection includes Multicast packets Enumeration: 'yes': 1, 'no': 0.
                                     bcastStormIncludeUnkonwnMcastUcast 1.3.6.1.4.1.8691.7.116.1.21.2.3 integer read-write
Broadcast Storm Protection includes Unkonwn Multicast and Unknown Unicast Packet packets Enumeration: 'yes': 1, 'no': 0.
                                     unicastFilterBehavior 1.3.6.1.4.1.8691.7.116.1.21.2.4
                                         ufbIncludeUnkonwnUcast 1.3.6.1.4.1.8691.7.116.1.21.2.4.1 integer read-write
Unicast Filter Behavior includes Unknown Unicast packets Enumeration: 'yes': 1, 'no': 0.
                                 portDisableMode 1.3.6.1.4.1.8691.7.116.1.21.3
                                     portDisableModePeriod 1.3.6.1.4.1.8691.7.116.1.21.3.1 integer read-write
Check time.
                                     portDisableModeTable 1.3.6.1.4.1.8691.7.116.1.21.3.2 no-access
The rate limiting table.
                                         portDisableModeEntry 1.3.6.1.4.1.8691.7.116.1.21.3.2.1 no-access
Rate limiting Entry.
                                             ingressLimit 1.3.6.1.4.1.8691.7.116.1.21.3.2.1.1 integer read-write
The ingress limit mode. Enumeration: 'rateMega4Fps22322': 4, 'rateMega1Fps4464': 1, 'rateGiga6Fps520840': 13, 'rateMega7Fps74405': 7, 'rateGiga3Fps148810': 10, 'rateGiga2Fps74410': 9, 'rateGiga7Fps744050': 14, 'notlimited': 0, 'rateGiga5Fps372030': 12, 'rateMega3Fps14881': 3, 'rateMega2Fps7441': 2, 'rateMega5Fps37203': 5, 'rateGiga1Fps44640': 8, 'rateGiga4Fps223220': 11, 'rateMega6Fps52084': 6.
                                 rateLimitingMode 1.3.6.1.4.1.8691.7.116.1.21.4 integer read-write
The rate limiting mode. Enumeration: 'portDisable': 1, 'normal': 0.
                           security 1.3.6.1.4.1.8691.7.116.1.22
                                 userLoginSetting 1.3.6.1.4.1.8691.7.116.1.22.1
                                     userLoginServer 1.3.6.1.4.1.8691.7.116.1.22.1.1 integer read-write
Set user login server option. Enumeration: 'tacacs': 1, 'radius': 2.
                                     tacacsServerSetting 1.3.6.1.4.1.8691.7.116.1.22.1.2
                                         tacacsLoginAuthServer 1.3.6.1.4.1.8691.7.116.1.22.1.2.1 displaystring read-write
Set Tacacs+ Server IP Address/Domain name.
                                         tacacsLoginAuthPort 1.3.6.1.4.1.8691.7.116.1.22.1.2.2 integer read-write
Set Tacacs+ Port.
                                         tacacsLoginAuthSharedKey 1.3.6.1.4.1.8691.7.116.1.22.1.2.3 displaystring read-write
Set Tacacs+ Shared Key.
                                         tacacsLoginAuthAuthType 1.3.6.1.4.1.8691.7.116.1.22.1.2.4 integer read-write
Set Tacacs+ Shared Key. Enumeration: 'pap': 1, 'mschap': 4, 'chap': 2, 'ascii': 0.
                                         tacacsLoginAuthTimeout 1.3.6.1.4.1.8691.7.116.1.22.1.2.5 integer read-write
Set Tacacs+ Shared Key.
                                     radiusServerSetting 1.3.6.1.4.1.8691.7.116.1.22.1.3
                                         radiusLoginAuthServer 1.3.6.1.4.1.8691.7.116.1.22.1.3.1 displaystring read-write
Set Radius Server IP Address/Domain name.
                                         radiusLoginAuthPort 1.3.6.1.4.1.8691.7.116.1.22.1.3.2 integer read-write
Set Radius Port.
                                         radiusLoginAuthSharedKey 1.3.6.1.4.1.8691.7.116.1.22.1.3.3 displaystring read-write
Set Radius Shared Key.
                                         radiusLoginAuthAuthType 1.3.6.1.4.1.8691.7.116.1.22.1.3.4 integer read-write
Set Radius Shared Key. Enumeration: 'eap-md5': 0.
                                         radiusLoginAuthTimeout 1.3.6.1.4.1.8691.7.116.1.22.1.3.5 integer read-write
Set Radius Shared Key.
                                 portAccessControl 1.3.6.1.4.1.8691.7.116.1.22.2
                                     staticPortLock 1.3.6.1.4.1.8691.7.116.1.22.2.1
                                         staticPortLockAddress 1.3.6.1.4.1.8691.7.116.1.22.2.1.1 macaddress read-only
The static port lock address.
                                         staticPortLockPort 1.3.6.1.4.1.8691.7.116.1.22.2.1.2 integer read-only
The port of the static port lock address.
                                         staticPortLockStatus 1.3.6.1.4.1.8691.7.116.1.22.2.1.3 integer read-only
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Enumeration: 'active': 1, 'createAndGo': 4.
                                     dot1x 1.3.6.1.4.1.8691.7.116.1.22.2.2
                                         dataBaseOption 1.3.6.1.4.1.8691.7.116.1.22.2.2.1 integer read-write
Set IEEE 802.1X database option. Enumeration: 'radius': 2, 'radiuslocal': 3, 'local': 1.
                                         dot1xReauthEnable 1.3.6.1.4.1.8691.7.116.1.22.2.2.5 integer read-write
Enable/Disable IEEE 802.1X Re-authentication. Enumeration: 'enable': 1, 'disable': 0.
                                         dot1xReauthPeriod 1.3.6.1.4.1.8691.7.116.1.22.2.2.6 integer read-write
Set IEEE 802.1X Re-authentication Period.
                                         dot1xSettingTable 1.3.6.1.4.1.8691.7.116.1.22.2.2.7 no-access
IEEE 802.1X Port Setting Table.
                                             dot1xSettingEntry 1.3.6.1.4.1.8691.7.116.1.22.2.2.7.1 no-access
IEEE 802.1X Port Setting Entry.
                                                 enableDot1X 1.3.6.1.4.1.8691.7.116.1.22.2.2.7.1.1 integer read-write
Enable/Disable IEEE 802.1X. Enumeration: 'enable': 1, 'disable': 0.
                                         dot1xReauthTable 1.3.6.1.4.1.8691.7.116.1.22.2.2.8 no-access
IEEE 802.1X Re-authentication Table.
                                             dot1xReauthEntry 1.3.6.1.4.1.8691.7.116.1.22.2.2.8.1 no-access
IEEE 802.1X Re-authentication Entry.
                                                 dot1xReauthPortIndex 1.3.6.1.4.1.8691.7.116.1.22.2.2.8.1.1 integer read-only
IEEE 802.1X Enabled Port Index.
                                                 dot1xReauth 1.3.6.1.4.1.8691.7.116.1.22.2.2.8.1.2 integer read-write
Reauth IEEE 802.1X. Enumeration: 'yes': 1, 'no': 0.
                                         dot1xRadius 1.3.6.1.4.1.8691.7.116.1.22.2.2.9
                                             dot1xSameAsAuthServer 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.1 integer read-write
Set Radius Server IP Address/Domain name. Enumeration: 'notSame': 0, 'same': 1.
                                             dot1x1stRadiusServer 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.2 displaystring read-write
Set Radius Server IP Address/Domain name.
                                             dot1x1stRadiusPort 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.3 integer read-write
Set Radius Port.
                                             dot1x1stRadiusSharedKey 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.4 displaystring read-write
Set Radius Shared Key.
                                             dot1x2ndRadiusServer 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.5 displaystring read-write
Set Radius Server IP Address/Domain name.
                                             dot1x2ndRadiusPort 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.6 integer read-write
Set Radius Port.
                                             dot1x2ndRadiusSharedKey 1.3.6.1.4.1.8691.7.116.1.22.2.2.9.7 displaystring read-write
Set Radius Shared Key.
                                     portAccessControlTable 1.3.6.1.4.1.8691.7.116.1.22.2.3 no-access
The Port Access Control table.
                                         portAccessControlEntry 1.3.6.1.4.1.8691.7.116.1.22.2.3.1 no-access
The Port Access Control table entry.
                                             portAccessControlAddress 1.3.6.1.4.1.8691.7.116.1.22.2.3.1.1 macaddress read-only
The MAC address which is static locked or IEEE 802.1X authorized.
                                             portAccessControlPortNo 1.3.6.1.4.1.8691.7.116.1.22.2.3.1.2 integer read-only
The port number that the Port Access Control address resides.
                                             portAccessControlAccessStatus 1.3.6.1.4.1.8691.7.116.1.22.2.3.1.3 integer read-only
The access status of the Port Access Control address. Enumeration: 'staticLock': 1, 'authorized': 2, 'unAuthorized': 3, 'authorizing': 4.
                                             portAccessControlStatus 1.3.6.1.4.1.8691.7.116.1.22.2.3.1.4 integer read-only
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5.
                           accessibleIP 1.3.6.1.4.1.8691.7.116.1.30
                                 enableAccessibleIP 1.3.6.1.4.1.8691.7.116.1.30.1 integer read-write
Enable the accessible IP address list. Enumeration: 'enable': 1, 'disable': 0.
                                 accessibleIpTable 1.3.6.1.4.1.8691.7.116.1.30.2 no-access
accessibleIP.
                                     accessibleIpEntry 1.3.6.1.4.1.8691.7.116.1.30.2.1 no-access
Accessible IP address entry.
                                         accessibleIpAddress 1.3.6.1.4.1.8691.7.116.1.30.2.1.1 ipaddress read-only
Accessible IP address
                                         accessibleIpNetMask 1.3.6.1.4.1.8691.7.116.1.30.2.1.2 ipaddress read-only
Accessible IP netmask.
                                         accessibleIpStatus 1.3.6.1.4.1.8691.7.116.1.30.2.1.3 integer read-only
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5.
                           sysFileUpdate 1.3.6.1.4.1.8691.7.116.1.31
                                 tftpServer 1.3.6.1.4.1.8691.7.116.1.31.1 displaystring read-write
The TFTP Server name(IP Address)
                                 firmwarePathName 1.3.6.1.4.1.8691.7.116.1.31.2 displaystring read-write
The path name of firmware file in the TFTP Server
                                 logPathName 1.3.6.1.4.1.8691.7.116.1.31.3 displaystring read-write
The path name of log file in the TFTP Server
                                 confPathName 1.3.6.1.4.1.8691.7.116.1.31.4 displaystring read-write
The path name of configuration file in the TFTP Server
                                 tftpUpdate 1.3.6.1.4.1.8691.7.116.1.31.5 integer read-only
Enumeration: 'importConfig': 2, 'importFirmware': 1, 'exportConfig': 3, 'exportLog': 4.
                           timeSetting 1.3.6.1.4.1.8691.7.116.1.32
                                 sysDateTime 1.3.6.1.4.1.8691.7.116.1.32.1 dateandtime read-write
The date time of system
                                 calibratePeriod 1.3.6.1.4.1.8691.7.116.1.32.2 integer read-write
The period (seconds) that calibrate with time server
                                 timeServer1 1.3.6.1.4.1.8691.7.116.1.32.3 displaystring read-write
The first time server
                                 timeServer2 1.3.6.1.4.1.8691.7.116.1.32.4 displaystring read-write
The second time server
                                 daylightSaving 1.3.6.1.4.1.8691.7.116.1.32.5
                                     startMonth 1.3.6.1.4.1.8691.7.116.1.32.5.1 integer read-write
Setting Start Month of Daylight Saving time Enumeration: 'mar': 3, 'feb': 2, 'aug': 8, 'sep': 9, 'apr': 4, 'na': 0, 'jun': 6, 'jul': 7, 'jan': 1, 'may': 5, 'nov': 11, 'dec': 12, 'oct': 10.
                                     startWeek 1.3.6.1.4.1.8691.7.116.1.32.5.2 integer read-write
Setting Start Week of Daylight Saving time Enumeration: 'na': 0, 'weeklast': 6, 'week1': 1, 'week3': 3, 'week2': 2, 'week4': 4.
                                     startDay 1.3.6.1.4.1.8691.7.116.1.32.5.3 integer read-write
Setting Start Day of Daylight Saving time Enumeration: 'wed': 4, 'na': 0, 'th': 5, 'mon': 2, 'sun': 1, 'fri': 6, 'tue': 3, 'sat': 7.
                                     startHour 1.3.6.1.4.1.8691.7.116.1.32.5.4 integer read-write
Setting Start Hour of Daylight Saving time
                                     endMonth 1.3.6.1.4.1.8691.7.116.1.32.5.5 integer read-write
Setting End Month of Daylight Saving time Enumeration: 'mar': 3, 'feb': 2, 'aug': 8, 'sep': 9, 'apr': 4, 'na': 0, 'jun': 6, 'jul': 7, 'jan': 1, 'may': 5, 'nov': 11, 'dec': 12, 'oct': 10.
                                     endWeek 1.3.6.1.4.1.8691.7.116.1.32.5.6 integer read-write
Setting End Week of Daylight Saving time Enumeration: 'na': 0, 'weeklast': 6, 'week1': 1, 'week3': 3, 'week2': 2, 'week4': 4.
                                     endDay 1.3.6.1.4.1.8691.7.116.1.32.5.7 integer read-write
Setting End Day of Daylight Saving time Enumeration: 'wed': 4, 'na': 0, 'th': 5, 'mon': 2, 'sun': 1, 'fri': 6, 'tue': 3, 'sat': 7.
                                     endHour 1.3.6.1.4.1.8691.7.116.1.32.5.8 integer read-write
Setting End Hour of Daylight Saving time
                                     offsetHours 1.3.6.1.4.1.8691.7.116.1.32.5.9 integer read-write
Setting Offset Hours of Daylight Saving time
                                 enableNTPServer 1.3.6.1.4.1.8691.7.116.1.32.6 integer read-write
This enable NTP Server. Enumeration: 'enable': 1, 'disable': 0.
                                 clockSource 1.3.6.1.4.1.8691.7.116.1.32.7 integer read-write
The clock source of system Enumeration: 'ntp': 2, 'local': 0, 'sntp': 1.
                           backupMediaSetting 1.3.6.1.4.1.8691.7.116.1.35
                                 abc02Status 1.3.6.1.4.1.8691.7.116.1.35.2 integer read-only
Current status of ABC-02 Enumeration: 'detecting': 2, 'ready-and-removable': 4, 'working': 3, 'device-not-present': 0, 'unauthorized-media': 1.
                                 abc02AutoImportConfig 1.3.6.1.4.1.8691.7.116.1.35.3 integer read-write
Auto load configuration from ABC to system when boot up Enumeration: 'enable': 1, 'disable': 0.
                                 abc02AutoExportConfig 1.3.6.1.4.1.8691.7.116.1.35.4 integer read-write
Auto backup to ABC-02 when configuration change Enumeration: 'enable': 1, 'disable': 0.
                                 abc02AutoExportLog 1.3.6.1.4.1.8691.7.116.1.35.5 integer read-write
Auto backup of event log to prevent overwrite Enumeration: 'enable': 1, 'disable': 0.
                           enableWarmStart 1.3.6.1.4.1.8691.7.116.1.36 integer read-write
Enable to restart MOXA ethernet switch. Enumeration: 'yes': 1, 'no': 0.
                           syslogSetting 1.3.6.1.4.1.8691.7.116.1.37
                                 syslogServer1 1.3.6.1.4.1.8691.7.116.1.37.1 displaystring read-write
The syslog server 1
                                 syslogServer1port 1.3.6.1.4.1.8691.7.116.1.37.2 integer read-write
The syslog server 1 port
                                 syslogServer2 1.3.6.1.4.1.8691.7.116.1.37.3 displaystring read-write
The syslog server 2
                                 syslogServer2port 1.3.6.1.4.1.8691.7.116.1.37.4 integer read-write
The syslog server 2 port
                                 syslogServer3 1.3.6.1.4.1.8691.7.116.1.37.5 displaystring read-write
The syslog server 3
                                 syslogServer3port 1.3.6.1.4.1.8691.7.116.1.37.6 integer read-write
The syslog server 3 port
                           dhcpRelayAgentSetting 1.3.6.1.4.1.8691.7.116.1.39
                                 dhcpServer1 1.3.6.1.4.1.8691.7.116.1.39.1 displaystring read-write
The dhcp Relay Agent Server 1.
                                 dhcpServer2 1.3.6.1.4.1.8691.7.116.1.39.2 displaystring read-write
The dhcp Relay Agent Server 2.
                                 dhcpServer3 1.3.6.1.4.1.8691.7.116.1.39.3 displaystring read-write
The dhcp Relay Agent Server 3.
                                 dhcpServer4 1.3.6.1.4.1.8691.7.116.1.39.4 displaystring read-write
The dhcp Relay Agent Server 4.
                                 option82Setting 1.3.6.1.4.1.8691.7.116.1.39.5
                                     enableOption82 1.3.6.1.4.1.8691.7.116.1.39.5.1 integer read-write
Enable DHCP Option 82 Enumeration: 'enable': 1, 'disable': 0.
                                     option82Type 1.3.6.1.4.1.8691.7.116.1.39.5.2 integer read-write
Option 82 Type selector Enumeration: 'client-id': 2, 'ip': 0, 'mac': 1, 'other': 3.
                                     option82Value 1.3.6.1.4.1.8691.7.116.1.39.5.3 displaystring read-write
Option 82 Type Value
                                     option82ValueDisplay 1.3.6.1.4.1.8691.7.116.1.39.5.4 displaystring read-only
Option 82 Type Value Display
                                 dhcpFunctionTable 1.3.6.1.4.1.8691.7.116.1.39.6 no-access
DHCP Function Table.
                                     dhcpFunctionTableEntry 1.3.6.1.4.1.8691.7.116.1.39.6.1 no-access
DHCP Function Table Entry.
                                         dhcpPortIndex 1.3.6.1.4.1.8691.7.116.1.39.6.1.1 integer read-only
The DHCP Port Index.
                                         circuitID 1.3.6.1.4.1.8691.7.116.1.39.6.1.2 displaystring read-only
The Circuit ID.
                                         option82Enable 1.3.6.1.4.1.8691.7.116.1.39.6.1.3 integer read-write
This enable option 82 of the port. Enumeration: 'enable': 1, 'disable': 0.
                           ieee1588Setting 1.3.6.1.4.1.8691.7.116.1.41
                                 ptpv1Setting 1.3.6.1.4.1.8691.7.116.1.41.1
                                     enablePtpv1 1.3.6.1.4.1.8691.7.116.1.41.1.1 integer read-write
This enable the PTP functon. Enumeration: 'enable': 1, 'disable': 0.
                                     clockModev1 1.3.6.1.4.1.8691.7.116.1.41.1.2 integer read-write
the clock mode of the PTP clock. Enumeration: 'v2E2EBC': 4, 'v2E2E2stepTC': 1, 'v2P2PBC': 5, 'v2P2PTC': 3, 'v1BC': 0.
                                     syncIntervalv1 1.3.6.1.4.1.8691.7.116.1.41.1.3 integer read-write
the logSyncInterval of the PTP clock. Enumeration: 'sixteenSec': 4, 'eightSec': 3, 'fourSec': 2, 'oneSec': 0, 'twoSec': 1.
                                     subDomainNamev1 1.3.6.1.4.1.8691.7.116.1.41.1.4 integer read-write
The subdomain name of the PTP clock. Enumeration: 'alt3': 3, 'alt1': 1, 'dflt': 0, 'alt2': 2.
                                     preferMasterv1 1.3.6.1.4.1.8691.7.116.1.41.1.5 integer read-write
This enable the PTP prefer master function. Enumeration: 'true': 1, 'false': 0.
                                 ptpv2Setting 1.3.6.1.4.1.8691.7.116.1.41.2
                                     enablePtp 1.3.6.1.4.1.8691.7.116.1.41.2.1 integer read-write
This enable the PTP functon. Enumeration: 'enable': 1, 'disable': 0.
                                     clockMode 1.3.6.1.4.1.8691.7.116.1.41.2.2 integer read-write
the clock mode of the PTP clock. Enumeration: 'v2E2EBC': 4, 'v2E2E2stepTC': 1, 'v2P2PBC': 5, 'v2P2PTC': 3, 'v1BC': 0.
                                     transport 1.3.6.1.4.1.8691.7.116.1.41.2.3 integer read-write
the transport mode of the PTP clock. Enumeration: 'ieee802dot3': 0, 'ipv4': 1.
                                     syncInterval 1.3.6.1.4.1.8691.7.116.1.41.2.4 integer read-write
the logSyncInterval of the PTP clock. Enumeration: 't2sec': 1, 't256msec': -2, 't512msec': -1, 't1sec': 0, 't128msec': -3.
                                     logMinDelayReqInterval 1.3.6.1.4.1.8691.7.116.1.41.2.5 integer read-write
the logMinDelayReqInterval of the PTP clock. Enumeration: 't32sec': 5, 't4sec': 2, 't2sec': 1, 't1sec': 0, 't8sec': 3, 't16sec': 4.
                                     logMinPdelayReqInterval 1.3.6.1.4.1.8691.7.116.1.41.2.6 integer read-write
the logMinPdelayReqInterval of the PTP clock. Enumeration: 't32sec': 5, 't4sec': 2, 't2sec': 1, 't1sec': 0, 't8sec': 3, 't512msec': -1, 't16sec': 4.
                                     logAnnounceInterval 1.3.6.1.4.1.8691.7.116.1.41.2.7 integer read-write
the logAnnounceInterval of the PTP clock. Enumeration: 't4sec': 2, 't16sec': 4, 't2sec': 1, 't1sec': 0, 't8sec': 3.
                                     announceReceiptTimeout 1.3.6.1.4.1.8691.7.116.1.41.2.8 integer read-write
the announceReceiptTimeout of the PTP clock.
                                     priority1 1.3.6.1.4.1.8691.7.116.1.41.2.9 integer read-write
the priority1 of the PTP clock.
                                     priority2 1.3.6.1.4.1.8691.7.116.1.41.2.10 integer read-write
the priority2 of the PTP clock.
                                     clockClass 1.3.6.1.4.1.8691.7.116.1.41.2.11 integer read-write
the clockClass of the PTP clock.
                                     domainNumber 1.3.6.1.4.1.8691.7.116.1.41.2.12 integer read-write
The domain number of the PTP clock. Enumeration: 'alt3': 3, 'alt1': 1, 'dflt': 0, 'alt2': 2.
                                     localUtcOffset 1.3.6.1.4.1.8691.7.116.1.41.2.13 integer read-write
the UTC offset of the local PTP clock.
                                     localUtcOffsetValid 1.3.6.1.4.1.8691.7.116.1.41.2.14 integer read-write
the UTC offset valid of the local PTP clock. Enumeration: 'true': 1, 'false': 0.
                                     localLeap59 1.3.6.1.4.1.8691.7.116.1.41.2.15 integer read-write
the leap59 of the local PTP clock. Enumeration: 'true': 1, 'false': 0.
                                     localLeap61 1.3.6.1.4.1.8691.7.116.1.41.2.16 integer read-write
the leap61 of the local PTP clock. Enumeration: 'true': 1, 'false': 0.
                                     localPtpTimescale 1.3.6.1.4.1.8691.7.116.1.41.2.17 integer read-write
the timescale of the local PTP clock. Enumeration: 'arb': 0, 'ptp': 1.
                                     localArbTime 1.3.6.1.4.1.8691.7.116.1.41.2.18 integer read-write
the ARB time of the local PTP clock.
                                 ptpv1Status 1.3.6.1.4.1.8691.7.116.1.41.3
                                     offsetToMasterv1 1.3.6.1.4.1.8691.7.116.1.41.3.1 integer read-only
The offset to master for nsec.
                                     meanPathDelayv1 1.3.6.1.4.1.8691.7.116.1.41.3.2 integer read-only
The mean path delay of the PTP clock.
                                     grandMasterUuidv1 1.3.6.1.4.1.8691.7.116.1.41.3.3 macaddress read-only
The grand master UUID address of the PTP clock.
                                     parentUuidv1 1.3.6.1.4.1.8691.7.116.1.41.3.4 macaddress read-only
The parent master UUID address of the PTP clock.
                                     clockStratumv1 1.3.6.1.4.1.8691.7.116.1.41.3.5 integer read-only
The clock stratum of the PTP clock.
                                     clockIdentifierv1 1.3.6.1.4.1.8691.7.116.1.41.3.6 displaystring read-only
The clock identifier of the PTP clock.
                                 ptpv2Status 1.3.6.1.4.1.8691.7.116.1.41.4
                                     offsetToMaster 1.3.6.1.4.1.8691.7.116.1.41.4.1 integer read-only
The offset to master for nsec.
                                     meanPathDelay 1.3.6.1.4.1.8691.7.116.1.41.4.2 integer read-only
The mean path delay of the PTP clock.
                                     parentIdentity 1.3.6.1.4.1.8691.7.116.1.41.4.3 displaystring read-only
The parent identity of the PTP clock.
                                     grandmasterIdentity 1.3.6.1.4.1.8691.7.116.1.41.4.4 displaystring read-only
The grandmaster identity of the PTP clock.
                                     grandmasterClockClass 1.3.6.1.4.1.8691.7.116.1.41.4.5 integer read-only
The grandmaster clockClass of the PTP clock.
                                     grandmasterClockAccuracy 1.3.6.1.4.1.8691.7.116.1.41.4.6 integer read-only
The grandmaster clockAccuracy of the PTP clock.
                                     grandmasterPriority1 1.3.6.1.4.1.8691.7.116.1.41.4.7 integer read-only
The grandmaster priority1 of the PTP clock.
                                     grandmasterPriority2 1.3.6.1.4.1.8691.7.116.1.41.4.8 integer read-only
The grandmaster priority2 of the PTP clock.
                                     stepsRemoved 1.3.6.1.4.1.8691.7.116.1.41.4.9 integer read-only
The steps removed of the PTP clock.
                                     currentUtcOffset 1.3.6.1.4.1.8691.7.116.1.41.4.10 integer read-only
The current utc offset of the PTP clock.
                                     currentUtcOffsetValid 1.3.6.1.4.1.8691.7.116.1.41.4.11 displaystring read-only
The current utc offset valid flag of the PTP clock.
                                     leap59 1.3.6.1.4.1.8691.7.116.1.41.4.12 displaystring read-only
The leap59 of the PTP clock.
                                     leap61 1.3.6.1.4.1.8691.7.116.1.41.4.13 displaystring read-only
The leap61 of the PTP clock.
                                     ptpTimescale 1.3.6.1.4.1.8691.7.116.1.41.4.14 displaystring read-only
The ptp timescale of the PTP clock.
                                     timesource 1.3.6.1.4.1.8691.7.116.1.41.4.15 displaystring read-only
The timesource of the PTP clock.
                                 ptpPortTable 1.3.6.1.4.1.8691.7.116.1.41.5 no-access
The ptp port table.
                                     ptpPortEntry 1.3.6.1.4.1.8691.7.116.1.41.5.1 no-access
The ptp port entry.
                                         ptpPortIndex 1.3.6.1.4.1.8691.7.116.1.41.5.1.1 integer read-only
The ptp port index.
                                         ptpPortEnable 1.3.6.1.4.1.8691.7.116.1.41.5.1.2 integer read-write
This enable the ptp port. Enumeration: 'enable': 1, 'disable': 0.
                                         ptpPortStatus 1.3.6.1.4.1.8691.7.116.1.41.5.1.3 integer read-only
This port status of the PTP clock. Enumeration: 'ptpFaulty': 1, 'ptpSlave': 8, 'ptpPassive': 6, 'ptpUncalibrated': 7, 'ptpListening': 3, 'ptpInitializing': 0, 'ptpPreMaster': 4, 'ptpMaster': 5, 'ptpDisabled': 2.
                           diagnosis 1.3.6.1.4.1.8691.7.116.1.42
                                 lldpSetting 1.3.6.1.4.1.8691.7.116.1.42.1
                                     enableLLDP 1.3.6.1.4.1.8691.7.116.1.42.1.1 integer read-write
This enable the LLDP functon. Enumeration: 'enable': 1, 'disable': 0.
                                     lldpMSGInterval 1.3.6.1.4.1.8691.7.116.1.42.1.2 integer read-write
The LLDP message transmit interval.
                           ageTime 1.3.6.1.4.1.8691.7.116.1.44 integer read-write
Web Timeout
                           garpSetting 1.3.6.1.4.1.8691.7.116.1.45
                                 joinTime 1.3.6.1.4.1.8691.7.116.1.45.1 integer read-write
Join Time (ms).
                                 leaveTime 1.3.6.1.4.1.8691.7.116.1.45.2 integer read-write
Leave Time (ms).
                                 leaveAllTime 1.3.6.1.4.1.8691.7.116.1.45.3 integer read-write
Leaveall Time (ms).
                           eventlog 1.3.6.1.4.1.8691.7.116.1.46
                                 eventlogTable 1.3.6.1.4.1.8691.7.116.1.46.1 no-access
The table of eventlog.
                                     eventlogEntry 1.3.6.1.4.1.8691.7.116.1.46.1.1 no-access
The table entry of eventlog.
                                         eventlogIndex 1.3.6.1.4.1.8691.7.116.1.46.1.1.1 integer read-only
The index of eventlog entry.
                                         eventlogBootup 1.3.6.1.4.1.8691.7.116.1.46.1.1.2 integer read-only
The reboot count of the system.
                                         eventlogDate 1.3.6.1.4.1.8691.7.116.1.46.1.1.3 displaystring read-only
The date of the event occured.
                                         eventlogTime 1.3.6.1.4.1.8691.7.116.1.46.1.1.4 displaystring read-only
The time of the event occured.
                                         eventlogUptime 1.3.6.1.4.1.8691.7.116.1.46.1.1.5 displaystring read-only
The time of the event occured after booting up.
                                         eventlogEvent 1.3.6.1.4.1.8691.7.116.1.46.1.1.6 displaystring read-only
The event which occured in the system.
                                 eventlogClear 1.3.6.1.4.1.8691.7.116.1.46.2 integer read-write
To clear the eventlog, set value 1 to this field. Enumeration: 'clear': 1, 'noop': 0.
                           industrialProtocol 1.3.6.1.4.1.8691.7.116.1.47
                                 eipSetting 1.3.6.1.4.1.8691.7.116.1.47.1
                                     enableEtherNetIP 1.3.6.1.4.1.8691.7.116.1.47.1.1 integer read-write
This enable the EtherNet/IP functon. Enumeration: 'enable': 1, 'disable': 0.
                                 modbusTCPSetting 1.3.6.1.4.1.8691.7.116.1.47.2
                                     enableModbusTCP 1.3.6.1.4.1.8691.7.116.1.47.2.1 integer read-write
This enable the Modbus TCP functon. Enumeration: 'enable': 1, 'disable': 0.
                                 profinetioSetting 1.3.6.1.4.1.8691.7.116.1.47.3
                                     enableProfinetIO 1.3.6.1.4.1.8691.7.116.1.47.3.1 integer read-write
This enable the PROFINET IO functon. Enumeration: 'enable': 1, 'disable': 0.
                           enableFactoryDefault 1.3.6.1.4.1.8691.7.116.1.48 integer read-write
Reset all EtherDevice switch settings to factory default values Enumeration: 'activate': 1.
                           consoleLoginMode 1.3.6.1.4.1.8691.7.116.1.51 integer read-write
This option can change console login mode. Enumeration: 'men': 0, 'cli': 1.
                           cpuLoading5s 1.3.6.1.4.1.8691.7.116.1.53 integer read-only
CPU Loading for the past 5 seconds in %.
                           cpuLoading30s 1.3.6.1.4.1.8691.7.116.1.54 integer read-only
CPU Loading for the past 30 seconds in %.
                           cpuLoading300s 1.3.6.1.4.1.8691.7.116.1.55 integer read-only
CPU Loading for the past 5 minutes in %.
                           totalMemory 1.3.6.1.4.1.8691.7.116.1.56 integer read-only
Total size of System RAM.
                           freeMemory 1.3.6.1.4.1.8691.7.116.1.57 integer read-only
Total size of free dynamic memory
                           usedMemory 1.3.6.1.4.1.8691.7.116.1.58 integer read-only
Total size of used dynamic memory
                           memoryUsage 1.3.6.1.4.1.8691.7.116.1.59 integer read-only
The usage of memory size in %.
                           loopProtection 1.3.6.1.4.1.8691.7.116.1.61 integer read-write
This enable the Loop Protection functon. Enumeration: 'enable': 1, 'disable': 0.
                           eventSettings 1.3.6.1.4.1.8691.7.116.1.62
                                 systemEventSettingsTable 1.3.6.1.4.1.8691.7.116.1.62.1 no-access
The system event settings table.
                                     systemEventSettingsEntry 1.3.6.1.4.1.8691.7.116.1.62.1.1 no-access
System Event Settings Entry.
                                         systemEventIndex 1.3.6.1.4.1.8691.7.116.1.62.1.1.1 integer read-only
Index of system event settings
                                         systemEventActive 1.3.6.1.4.1.8691.7.116.1.62.1.1.2 integer read-write
Status of active of system event settings Enumeration: 'active': 1, 'inactive': 0.
                                         systemEventName 1.3.6.1.4.1.8691.7.116.1.62.1.1.3 displaystring read-only
Name of system event settings
                                         systemEventSupport 1.3.6.1.4.1.8691.7.116.1.62.1.1.4 integer read-only
Status of support modules of system event settings. Enumeration: 'support-SNMP-Trap-Email': 3, 'support-Relay1-Relay2': 24, 'support-Syslog-Relay1-Relay2': 28, 'support-Relay2-only': 16, 'support-SNMPTrap-Relay1-Relay2': 25, 'support-SNMPTrap-only': 1, 'support-Syslog-Relay2': 20, 'support-Syslog-Relay1': 12, 'support-SNMPTrap-Syslog': 5, 'support-Email-Relay2': 18, 'support-Email-Relay1': 10, 'support-all-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'support-SNMPTrap-Email-Syslog': 7, 'support-Email-Syslog-Relay2': 22, 'support-Email-Syslog-Relay1': 14, 'support-SNMPTrap-Relay2': 17, 'support-SNMPTrap-Relay1': 9, 'support-SNMPTrap-Email-Syslog-Relay2': 23, 'support-SNMPTrap-Email-Syslog-Relay1': 15, 'support-SNMPTrap-Syslog-Relay2': 21, 'support-SNMPTrap-Syslog-Relay1': 13, 'support-SNMPTrap-Email-Relay1': 11, 'support-SNMPTrap-Email-Relay2': 19, 'support-Syslog-only': 4, 'none': 0, 'support-Relay1-only': 8, 'support-Email-only': 2, 'support-Email-Syslog': 6, 'support-Email-Syslog-Relay1-Relay2': 30.
                                         systemEventModuleEnable 1.3.6.1.4.1.8691.7.116.1.62.1.1.5 integer read-write
Status of enable of system event settings. Enumeration: 'enable-SNMPTrap-Relay1-Relay2': 25, 'enable-Email-Syslog-Relay1-Relay2': 30, 'enable-Syslog-Relay1-Relay2': 28, 'enable-Email-Syslog-Relay2': 22, 'enable-Email-Syslog-Relay1': 14, 'enable-SNMPTrap-Email': 3, 'enable-Relay1-only': 8, 'enable-Email-only': 2, 'enable-Syslog-Relay2': 20, 'enable-Syslog-Relay1': 12, 'enable-SNMPTrap-Syslog': 5, 'enable-Email-Syslog': 6, 'enable-SNMPTrap-Email-Relay1': 11, 'enable-SNMPTrap-Email-Relay2': 19, 'enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'enable-Email-Relay1': 10, 'enable-Email-Relay2': 18, 'enable-SNMPTrap-Syslog-Relay1': 13, 'enable-SNMPTrap-Syslog-Relay2': 21, 'enable-SNMPTrap-Email-Syslog-Relay1': 15, 'enable-SNMPTrap-Relay2': 17, 'enable-SNMPTrap-Relay1': 9, 'enable-SNMPTrap-Email-Syslog-Relay2': 23, 'none': 0, 'enable-Relay1-Relay2': 24, 'enable-Syslog-only': 4, 'enable-Relay2-only': 16, 'enable-SNMPTrap-only': 1, 'enable-SNMPTrap-Email-Syslog': 7.
                                         systemEventSeverity 1.3.6.1.4.1.8691.7.116.1.62.1.1.6 integer read-write
Severity of system event settings Enumeration: 'information': 6, 'notice': 5, 'emergency': 0, 'alert': 1, 'critical': 2, 'error': 3, 'debug': 7, 'warning': 4.
                                 portEventSettingsTable 1.3.6.1.4.1.8691.7.116.1.62.2 no-access
The port event settings table.
                                     portEventSettingsEntry 1.3.6.1.4.1.8691.7.116.1.62.2.1 no-access
Port Event Settings Entry.
                                         portEventIndex 1.3.6.1.4.1.8691.7.116.1.62.2.1.1 integer read-only
Index of port event settings
                                         portEventLabel 1.3.6.1.4.1.8691.7.116.1.62.2.1.2 displaystring read-only
Label of portEventIndex
                                         portEventActive 1.3.6.1.4.1.8691.7.116.1.62.2.1.3 integer read-write
Status of active of port event settings Enumeration: 'active': 1, 'inactive': 0.
                                         portEventEnable 1.3.6.1.4.1.8691.7.116.1.62.2.1.4 integer read-write
Status of event enable of port event settings Enumeration: 'none': 0, 'enable-LinkOn-LinkOff': 3, 'enable-LinkOn-only': 1, 'enable-LinkOff-TrafficOverload': 6, 'enable-All-LinkOn-LinkOff-TrafficOverload': 7, 'enable-LinkOn-TrafficOverload': 5, 'enable-TrafficOverload-only': 4, 'enable-LinkOff-only': 2.
                                         portEventTrafficThreshold 1.3.6.1.4.1.8691.7.116.1.62.2.1.5 integer read-write
Threshold of Traffic-Overload in percentage(%)
                                         portEventTrafficDuration 1.3.6.1.4.1.8691.7.116.1.62.2.1.6 integer read-write
Duration of Traffic-Overload in secs(s)
                                         portEventModuleEnable 1.3.6.1.4.1.8691.7.116.1.62.2.1.7 integer read-write
Status of module enable of port event settings. Enumeration: 'enable-SNMPTrap-Relay1-Relay2': 25, 'enable-Email-Syslog-Relay1-Relay2': 30, 'enable-Syslog-Relay1-Relay2': 28, 'enable-Email-Syslog-Relay2': 22, 'enable-Email-Syslog-Relay1': 14, 'enable-SNMPTrap-Email': 3, 'enable-Relay1-only': 8, 'enable-Email-only': 2, 'enable-Syslog-Relay2': 20, 'enable-Syslog-Relay1': 12, 'enable-SNMPTrap-Syslog': 5, 'enable-Email-Syslog': 6, 'enable-SNMPTrap-Email-Relay1': 11, 'enable-SNMPTrap-Email-Relay2': 19, 'enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'enable-Email-Relay1': 10, 'enable-Email-Relay2': 18, 'enable-SNMPTrap-Syslog-Relay1': 13, 'enable-SNMPTrap-Syslog-Relay2': 21, 'enable-SNMPTrap-Email-Syslog-Relay1': 15, 'enable-SNMPTrap-Relay2': 17, 'enable-SNMPTrap-Relay1': 9, 'enable-SNMPTrap-Email-Syslog-Relay2': 23, 'none': 0, 'enable-Relay1-Relay2': 24, 'enable-Syslog-only': 4, 'enable-Relay2-only': 16, 'enable-SNMPTrap-only': 1, 'enable-SNMPTrap-Email-Syslog': 7.
                                         portEventSeverity 1.3.6.1.4.1.8691.7.116.1.62.2.1.8 integer read-write
Severity of port event settings Enumeration: 'information': 6, 'notice': 5, 'emergency': 0, 'alert': 1, 'critical': 2, 'error': 3, 'debug': 7, 'warning': 4.
                           managementInterface 1.3.6.1.4.1.8691.7.116.1.63
                                 httpEnable 1.3.6.1.4.1.8691.7.116.1.63.1 integer read-write
Status of http service Enumeration: 'enable': 1, 'disable': 0.
                                 httpPort 1.3.6.1.4.1.8691.7.116.1.63.2 integer read-write
Port of http service
                                 sslEnable 1.3.6.1.4.1.8691.7.116.1.63.3 integer read-write
Status of ssl(https) service Enumeration: 'enable': 1, 'disable': 0.
                                 sslPort 1.3.6.1.4.1.8691.7.116.1.63.4 integer read-write
Port of ssl(https) service
                                 telnetEnable 1.3.6.1.4.1.8691.7.116.1.63.5 integer read-write
Status of telnet service Enumeration: 'enable': 1, 'disable': 0.
                                 telnetPort 1.3.6.1.4.1.8691.7.116.1.63.6 integer read-write
Port of telnet service
                                 sshEnable 1.3.6.1.4.1.8691.7.116.1.63.7 integer read-write
Status of ssh service Enumeration: 'enable': 1, 'disable': 0.
                                 sshPort 1.3.6.1.4.1.8691.7.116.1.63.8 integer read-write
Port of telnet service
                                 webTimeout 1.3.6.1.4.1.8691.7.116.1.63.9 integer read-write
Web Timeout (Mins). Set 0 to disable
                           switchLocator 1.3.6.1.4.1.8691.7.116.1.64
                                 blinkingLocatorLED 1.3.6.1.4.1.8691.7.116.1.64.1 integer read-write
Blinking switch locator LED. Enumeration: 'on': 1, 'off': 0.
                                 disableLocatorLEDTime 1.3.6.1.4.1.8691.7.116.1.64.2 integer read-write
Configure back-off time for disable switch locator LED.
                           uiVersion 1.3.6.1.4.1.8691.7.116.1.65 integer read-only
New UI Version
                       swTraps 1.3.6.1.4.1.8691.7.116.2
                           varconfigChangeTrap 1.3.6.1.4.1.8691.7.116.2.1 integer read-only
The configuration has been changed. Enumeration: 'none': 1, 'configChanged': 2.
                           varpower1Trap 1.3.6.1.4.1.8691.7.116.2.2 integer read-only
The power on/off changed. Enumeration: 'none': 1, 'on2off': 2, 'off2on': 3.
                           varpower2Trap 1.3.6.1.4.1.8691.7.116.2.3 integer read-only
The power on/off changed. Enumeration: 'none': 1, 'on2off': 2, 'off2on': 3.
                           vartrafficOverloadTrap 1.3.6.1.4.1.8691.7.116.2.4 integer read-only
The ethernet port's traffic loading exceeds the pre-defined value.
                           varredundancyTopologyChangedTrap 1.3.6.1.4.1.8691.7.116.2.5 integer read-only
The redundancy topology has been changed. Enumeration: 'topologyChangedTurboChainHead': 3, 'none': 1, 'topologyChanged': 2, 'topologyChangedTurboChainTail': 4.
                           varturboRingCouplingPortChangedTrap 1.3.6.1.4.1.8691.7.116.2.6 integer read-only
The coupling path of Turbo Ring has been changed. Enumeration: 'none': 1, 'couplingPortChanged': 2.
                           varturboRingMasterChangedTrap 1.3.6.1.4.1.8691.7.116.2.7 integer read-only
The master of Turbo Ring has been changed. Enumeration: 'none': 1, 'ringMasterChanged': 2.
                           varPoEWarningTrap 1.3.6.1.4.1.8691.7.116.2.16 integer read-only
The POE warning message. Enumeration: 'pseOverTemperature': 7, 'pdPowerOn': 3, 'exceedSystemThreshold': 5, 'pdOverCurrent': 1, 'exceedSystemPowerBudget': 9, 'pdCheckFail': 2, 'pdPowerOff': 4, 'pseFetBad': 6, 'pseVeeUvlo': 8.
                           varPortLoopDetectedTrap 1.3.6.1.4.1.8691.7.116.2.17 integer read-only
The DUT port is looping.
                           varRateLimitedOnTrap 1.3.6.1.4.1.8691.7.116.2.18 integer read-only
The DUT port is rate limit. Enumeration: 'none': 1, 'rateLimitOFF': 3, 'rateLimitON': 2.
                           varLLDPChgTrap 1.3.6.1.4.1.8691.7.116.2.19 integer read-only
The LLDP table is changing.
                           varusbWarningTrap 1.3.6.1.4.1.8691.7.116.2.20 integer read-only
USB warning trap event. Enumeration: 'isDetached': 7, 'autoImportFail': 5, 'noEnoughSpace': 1, 'unauthDevice': 2, 'isAttached': 6, 'exportConfigFail': 3, 'exportLogFail': 4.
                           varturboRingMasterMismatchTrap 1.3.6.1.4.1.8691.7.116.2.22 integer read-only
The master of Turbo Ring has been mismatch. Enumeration: 'none': 1, 'ringMasterMismatch': 2.