MOXA-EDSG512E8POE-MIB: View SNMP OID List / Download MIB
VENDOR: MOXA TECHNOLOGIES CO.
| Home | MIB: MOXA-EDSG512E8POE-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| moxa | 1.3.6.1.4.1.8691 | |||
| industrialEthernet | 1.3.6.1.4.1.8691.7 | |||
| edsg512epoe | 1.3.6.1.4.1.8691.7.108 |
The MIB module for Moxa EDS-G512E-PoE series specific information. |
||
| mibNotificationsPrefix | 1.3.6.1.4.1.8691.7.108.0 | |||
| configChangeTrap | 1.3.6.1.4.1.8691.7.108.0.1 |
The configuration has been changed. |
||
| power1Trap | 1.3.6.1.4.1.8691.7.108.0.2 |
The power on/off changed. |
||
| power2Trap | 1.3.6.1.4.1.8691.7.108.0.3 |
The power on/off changed. |
||
| trafficOverloadTrap | 1.3.6.1.4.1.8691.7.108.0.4 |
The ethernet port's traffic loading exceeds the pre-defined value. |
||
| redundancyTopologyChangedTrap | 1.3.6.1.4.1.8691.7.108.0.5 |
The redundancy topology has been changed. |
||
| turboRingCouplingPortChangedTrap | 1.3.6.1.4.1.8691.7.108.0.6 |
The coupling path of Turbo Ring has been changed. |
||
| turboRingMasterChangedTrap | 1.3.6.1.4.1.8691.7.108.0.7 |
The master of Turbo Ring has been changed. |
||
| poeWarningTrap | 1.3.6.1.4.1.8691.7.108.0.16 |
The POE warning message. |
||
| portLoopDetectedTrap | 1.3.6.1.4.1.8691.7.108.0.17 |
The DUT port is looping. |
||
| rateLimitedOnTrap | 1.3.6.1.4.1.8691.7.108.0.18 |
The DUT port rate limit is ON. |
||
| lldpChgTrap | 1.3.6.1.4.1.8691.7.108.0.19 |
The LLDP table is changing. |
||
| abc02WarningTrap | 1.3.6.1.4.1.8691.7.108.0.20 |
Warning trap while specific error is occured in abc02. |
||
| turboRingMasterMismatchTrap | 1.3.6.1.4.1.8691.7.108.0.22 |
The master of Turbo Ring has been mismatch. |
||
| userAuthSuccessTrap | 1.3.6.1.4.1.8691.7.108.0.24 |
Account authentication success. |
||
| userAuthFailTrap | 1.3.6.1.4.1.8691.7.108.0.25 |
Account authentication failed. |
||
| macStickyPortViolationPortDisableTrap | 1.3.6.1.4.1.8691.7.108.0.26 |
The number of sticky Mac address on the port was over the limit. A macStickyPortViolationPortDisableTrap will contain 3 elements: port, macaddr, and vlanid. |
||
| fiberWarningTrap | 1.3.6.1.4.1.8691.7.108.0.28 |
Warning trap while fiber is over threshold. |
||
| loggingCapacityTrap | 1.3.6.1.4.1.8691.7.108.0.29 |
Warning trap while event log is over capacity threshold. |
||
| userInfoChgTrap | 1.3.6.1.4.1.8691.7.108.0.31 |
Account information has been changed. |
||
| configImportTrap | 1.3.6.1.4.1.8691.7.108.0.32 |
Configuration has been imported. |
||
| remoteAuthSuccessTrap | 1.3.6.1.4.1.8691.7.108.0.38 |
The login authentication is successful by the remote server |
||
| remoteAuthFailTrap | 1.3.6.1.4.1.8691.7.108.0.39 |
The login authentication is failed by the remote server |
||
| swMgmt | 1.3.6.1.4.1.8691.7.108.1 | |||
| numberOfPorts | 1.3.6.1.4.1.8691.7.108.1.1 | integer | read-only |
Total Ports. |
| switchModel | 1.3.6.1.4.1.8691.7.108.1.2 | displaystring | read-only |
The switch model. |
| firmwareVersion | 1.3.6.1.4.1.8691.7.108.1.4 | displaystring | read-only |
The firmware version. |
| enableWebConfig | 1.3.6.1.4.1.8691.7.108.1.5 | integer | read-write |
This enable the Web. configuration function. Enumeration: 'httpsOnly': 2, 'disable': 0, 'httpOrHttps': 1. |
| enableTelnetConsole | 1.3.6.1.4.1.8691.7.108.1.6 | integer | read-write |
This enable telnet console. Enumeration: 'enable': 1, 'disable': 0. |
| lineSwapRecovery | 1.3.6.1.4.1.8691.7.108.1.7 | integer | read-write |
This enable line-swap-fast-recovery function. Enumeration: 'enable': 1, 'disable': 0. |
| networkSetting | 1.3.6.1.4.1.8691.7.108.1.8 | |||
| switchIpAddr | 1.3.6.1.4.1.8691.7.108.1.8.1 | ipaddress | read-only |
The IP Address of this switch. |
| switchIpMask | 1.3.6.1.4.1.8691.7.108.1.8.2 | ipaddress | read-only |
The netmask of this switch. |
| defaultGateway | 1.3.6.1.4.1.8691.7.108.1.8.3 | ipaddress | read-only |
The default gateway of this switch. |
| enableAutoIpConfig | 1.3.6.1.4.1.8691.7.108.1.8.4 | integer | read-write |
This enable the automatic IP address configuration function. Enumeration: 'enableBOOTP': 2, 'enableDHCP': 1, 'disable': 0. |
| dnsServer1IpAddr | 1.3.6.1.4.1.8691.7.108.1.8.5 | ipaddress | read-write |
The first DNS server's IP address |
| snmpTrapCommunity | 1.3.6.1.4.1.8691.7.108.1.8.6 | displaystring | read-write |
The SNMP trap community name |
| trapServerAddr | 1.3.6.1.4.1.8691.7.108.1.8.7 | displaystring | read-write |
The IP address/Domain name of SNMP trap server |
| dnsServer2IpAddr | 1.3.6.1.4.1.8691.7.108.1.8.8 | ipaddress | read-write |
The second DNS server's IP address |
| snmpReadCommunity | 1.3.6.1.4.1.8691.7.108.1.8.9 | displaystring | read-write |
The SNMP read community name |
| snmpTrap2Community | 1.3.6.1.4.1.8691.7.108.1.8.11 | displaystring | read-write |
The Second SNMP trap community name |
| trap2ServerAddr | 1.3.6.1.4.1.8691.7.108.1.8.12 | displaystring | read-write |
The IP address/Domain name of Second SNMP trap server |
| snmpInformEnable | 1.3.6.1.4.1.8691.7.108.1.8.13 | integer | read-write |
This enable the snmpInform function. Enumeration: 'enable': 1, 'disable': 0. |
| snmpInformRetries | 1.3.6.1.4.1.8691.7.108.1.8.14 | integer | read-write |
The snmp inform retry times of SNMP trap server |
| snmpInformTimeout | 1.3.6.1.4.1.8691.7.108.1.8.15 | integer | read-write |
The snmp inform interval of SNMP trap server |
| dhcpRetryPeriods | 1.3.6.1.4.1.8691.7.108.1.8.16 | integer | read-write |
The DHCP retry periods. |
| dhcpRetryTimes | 1.3.6.1.4.1.8691.7.108.1.8.17 | integer | read-write |
The dhcp retry times. |
| trapVersion | 1.3.6.1.4.1.8691.7.108.1.8.18 | integer | read-write |
Version of SNMP trap Enumeration: 'snmpv3-Trap': 3, 'snmpv3-Inform': 4, 'snmpv2-Notification': 1, 'snmpv2-Inform': 2, 'snmpv1-Trap': 0. |
| snmpVersion | 1.3.6.1.4.1.8691.7.108.1.8.21 | integer | read-only |
Version of SNMP Enumeration: 'snmpv1-v2c-v3': 1, 'snmpv1-v2c': 2, 'snmpv3': 3. |
| snmpAdminSecurityLevel | 1.3.6.1.4.1.8691.7.108.1.8.22 | integer | read-only |
Admin security level Enumeration: 'noAuthNoPriv': 1, 'authPriv': 3, 'authNoPriv': 2. |
| snmpUserSecurityLevel | 1.3.6.1.4.1.8691.7.108.1.8.23 | integer | read-only |
User security level Enumeration: 'noAuthNoPriv': 1, 'authPriv': 3, 'authNoPriv': 2. |
| portSetting | 1.3.6.1.4.1.8691.7.108.1.9 | |||
| portTable | 1.3.6.1.4.1.8691.7.108.1.9.1 | no-access |
The port table. |
|
| 1.3.6.1.4.1.8691.7.108.1.9.1.1 | no-access |
The port entry. |
||
| portIndex | 1.3.6.1.4.1.8691.7.108.1.9.1.1.1 | integer | read-only |
The port index. |
| portDesc | 1.3.6.1.4.1.8691.7.108.1.9.1.1.2 | displaystring | read-only |
The port description |
| portEnable | 1.3.6.1.4.1.8691.7.108.1.9.1.1.3 | integer | read-write |
This enable the port. Enumeration: 'enable': 1, 'disable': 0. |
| portSpeed | 1.3.6.1.4.1.8691.7.108.1.9.1.1.4 | integer | read-write |
The port speed and duplex. Enumeration: 'speed10M-Full': 3, 'auto': 0, 'speed1000M-Full': 5, 'speed100M-Full': 1, 'speed10M-Half': 4, 'speed100M-Half': 2. |
| portMDI | 1.3.6.1.4.1.8691.7.108.1.9.1.1.5 | integer | read-write |
The port MDI/MDIX. Enumeration: 'na': 0, 'mdi': 2, 'mdiX': 3, 'auto': 1. |
| portFDXFlowCtrl | 1.3.6.1.4.1.8691.7.108.1.9.1.1.6 | integer | read-write |
The port FDX Flow Control Enumeration: 'enable': 1, 'disable': 0. |
| portName | 1.3.6.1.4.1.8691.7.108.1.9.1.1.7 | displaystring | read-write |
The port Name |
| portSubdesc | 1.3.6.1.4.1.8691.7.108.1.9.1.1.8 | displaystring | read-only |
The port second description |
| monitor | 1.3.6.1.4.1.8691.7.108.1.10 | |||
| power1InputStatus | 1.3.6.1.4.1.8691.7.108.1.10.1 | integer | read-only |
The status of the first power input. Enumeration: 'present': 1, 'not-present': 0. |
| power2InputStatus | 1.3.6.1.4.1.8691.7.108.1.10.2 | integer | read-only |
The status of the second power input. Enumeration: 'present': 1, 'not-present': 0. |
| monitorPortTable | 1.3.6.1.4.1.8691.7.108.1.10.3 | no-access |
The port table of monitor function. |
|
| 1.3.6.1.4.1.8691.7.108.1.10.3.1 | no-access |
The port table entry of monitor function. |
||
| monitorLinkStatus | 1.3.6.1.4.1.8691.7.108.1.10.3.1.2 | integer | read-only |
The port link status. Enumeration: 'on': 1, 'disable': -1, 'off': 0. |
| monitorSpeed | 1.3.6.1.4.1.8691.7.108.1.10.3.1.3 | integer | read-only |
The port speed and duplex status. Enumeration: 'speed10M-Full': 1, 'speed1000M-Half': 4, 'na': -1, 'speed1000M-Full': 5, 'speed100M-Full': 3, 'speed10M-Half': 0, 'speed100M-Half': 2. |
| monitorAutoMDI | 1.3.6.1.4.1.8691.7.108.1.10.3.1.4 | integer | read-only |
The port MDI/MDIX status. Enumeration: 'auto': 2, 'mdi': 0, 'mdix': 1, 'na': -1. |
| monitorTraffic | 1.3.6.1.4.1.8691.7.108.1.10.3.1.5 | integer | read-only |
The trafic loading percentage of port. |
| monitorFDXFlowCtrl | 1.3.6.1.4.1.8691.7.108.1.10.3.1.6 | integer | read-only |
The Full-Duplex flow control status Enumeration: 'on': 1, 'off': 0. |
| monitorTxTraffic | 1.3.6.1.4.1.8691.7.108.1.10.3.1.7 | integer | read-only |
The TX traffic loading percentage of port. |
| monitorRxTraffic | 1.3.6.1.4.1.8691.7.108.1.10.3.1.8 | integer | read-only |
The RTX traffic loading percentage of port. |
| monitorDiTable | 1.3.6.1.4.1.8691.7.108.1.10.4 | no-access |
The DI table of monitor function. |
|
| 1.3.6.1.4.1.8691.7.108.1.10.4.1 | no-access |
The DI table entry of monitor function. |
||
| diIndex | 1.3.6.1.4.1.8691.7.108.1.10.4.1.1 | integer | read-only |
The DI index of monitor function |
| diInputStatus | 1.3.6.1.4.1.8691.7.108.1.10.4.1.2 | integer | read-only |
The DI input status. Enumeration: 'on': 1, 'off': 0. |
| powerConsumption | 1.3.6.1.4.1.8691.7.108.1.10.8 | displaystring | read-only |
Current power comsuption(Watts). Accurate to second decimal place. |
| monitorFiberCheckTable | 1.3.6.1.4.1.8691.7.108.1.10.11 | no-access |
The Fiber Check table of monitor function. |
|
| 1.3.6.1.4.1.8691.7.108.1.10.11.1 | no-access |
The fiber check table entry of monitor function. |
||
| fiberPort | 1.3.6.1.4.1.8691.7.108.1.10.11.1.1 | displaystring | read-only |
The fiber index of monitor function |
| fiberModelName | 1.3.6.1.4.1.8691.7.108.1.10.11.1.2 | displaystring | read-only |
The fiber ModelName of monitor function |
| fiberWaveLength | 1.3.6.1.4.1.8691.7.108.1.10.11.1.3 | displaystring | read-only |
The fiber wavelength |
| fiberVoltage | 1.3.6.1.4.1.8691.7.108.1.10.11.1.4 | displaystring | read-only |
The fiber Voltage of monitor function |
| fiberTemperature | 1.3.6.1.4.1.8691.7.108.1.10.11.1.5 | displaystring | read-only |
The fiber Temperature of monitor function |
| fiberTempWarn | 1.3.6.1.4.1.8691.7.108.1.10.11.1.6 | displaystring | read-only |
The Fiber Temperature warning value of monitor function |
| fiberTxPower | 1.3.6.1.4.1.8691.7.108.1.10.11.1.7 | displaystring | read-only |
The fiber TX power of monitor function |
| fiberTxPowerWarn | 1.3.6.1.4.1.8691.7.108.1.10.11.1.8 | displaystring | read-only |
The fiber TX power warning value of monitor function |
| fiberRxPower | 1.3.6.1.4.1.8691.7.108.1.10.11.1.9 | displaystring | read-only |
The fiber RX power of monitor function |
| fiberRxPowerWarn | 1.3.6.1.4.1.8691.7.108.1.10.11.1.10 | displaystring | read-only |
The Fiber RX power warning value of monitor function |
| fiberSN | 1.3.6.1.4.1.8691.7.108.1.10.11.1.13 | displaystring | read-only |
The fiber serial number |
| emailWarning | 1.3.6.1.4.1.8691.7.108.1.11 | |||
| emailService | 1.3.6.1.4.1.8691.7.108.1.11.1 | |||
| emailWarningSMTPServer | 1.3.6.1.4.1.8691.7.108.1.11.1.1 | displaystring | read-write |
The SMTP server's Ip Address/Domain name of email warning function. |
| emailWarningFirstRecipientEmailAddr | 1.3.6.1.4.1.8691.7.108.1.11.1.2 | displaystring | read-write |
The first recipient email address of email warning function. |
| emailWarningSecondRecipientEmailAddr | 1.3.6.1.4.1.8691.7.108.1.11.1.3 | displaystring | read-write |
The second recipient email address of email warning function. |
| emailWarningThirdRecipientEmailAddr | 1.3.6.1.4.1.8691.7.108.1.11.1.4 | displaystring | read-write |
The third recipient email address of email warning function. |
| emailWarningFourthRecipientEmailAddr | 1.3.6.1.4.1.8691.7.108.1.11.1.5 | displaystring | read-write |
The fourth recipient email address of email warning function. |
| emailWarningSMTPPort | 1.3.6.1.4.1.8691.7.108.1.11.1.6 | integer | read-write |
The SMTP server's port of email warning function. |
| emailWarningSMTPUser | 1.3.6.1.4.1.8691.7.108.1.11.1.7 | displaystring | read-write |
The registered user account for SMTP service of email warning function. |
| emailWarningSMTPPassword | 1.3.6.1.4.1.8691.7.108.1.11.1.8 | displaystring | read-write |
The registered user password for SMTP service of email warning function. |
| emailWarningSMTPTLS | 1.3.6.1.4.1.8691.7.108.1.11.1.9 | integer | read-write |
The SMTP server use TLS of email warning function. Enumeration: 'yes': 1, 'no': 0. |
| emailWarningSMTPAuthMethod | 1.3.6.1.4.1.8691.7.108.1.11.1.10 | integer | read-write |
The SMTP server use login method of email warning function. Enumeration: 'plain': 0, 'login': 1, 'cram-md5': 2. |
| emailWarningSenderEmailAddr | 1.3.6.1.4.1.8691.7.108.1.11.1.11 | displaystring | read-write |
The sender email address of email warning function. |
| setDeviceIp | 1.3.6.1.4.1.8691.7.108.1.12 | |||
| setDevIpTable | 1.3.6.1.4.1.8691.7.108.1.12.1 | no-access |
The set devvice IP table. |
|
| 1.3.6.1.4.1.8691.7.108.1.12.1.1 | no-access |
The set devvice IP table entry. |
||
| setDevIpIndex | 1.3.6.1.4.1.8691.7.108.1.12.1.1.1 | integer | read-only |
The set devvice IP index. |
| setDevIpCurrentIpofDevice | 1.3.6.1.4.1.8691.7.108.1.12.1.1.2 | displaystring | read-only |
The current IP address of connected to this port. |
| setDevIpPresentBy | 1.3.6.1.4.1.8691.7.108.1.12.1.1.3 | integer | read-only |
The protocol used that assigning IP to the device. Enumeration: 'rarp': 2, 'dhcpClient': 1, 'bootp': 4, 'no': 0. |
| setDevIpDedicatedIp | 1.3.6.1.4.1.8691.7.108.1.12.1.1.4 | ipaddress | read-write |
The IP address when assign to the device connected to this port. |
| mirroring | 1.3.6.1.4.1.8691.7.108.1.13 | |||
| targetPort | 1.3.6.1.4.1.8691.7.108.1.13.1 | integer | read-write |
The mirrored port of mirroring function. |
| mirroringPort | 1.3.6.1.4.1.8691.7.108.1.13.2 | integer | read-write |
The mirroring port of mirroring function. |
| monitorDirection | 1.3.6.1.4.1.8691.7.108.1.13.3 | integer | read-write |
The traffic direction of mirroring function. Enumeration: 'biDirectional': 2, 'inputDataStream': 0, 'outputDataStream': 1. |
| portTrunking | 1.3.6.1.4.1.8691.7.108.1.14 | |||
| trunkSettingTable | 1.3.6.1.4.1.8691.7.108.1.14.1 | no-access |
Port Trunking Setting Table. |
|
| 1.3.6.1.4.1.8691.7.108.1.14.1.1 | no-access |
Port Trunking Setting Entry. |
||
| trunkSettingIndex | 1.3.6.1.4.1.8691.7.108.1.14.1.1.1 | integer | read-only |
Trunking Group Index. |
| trunkType | 1.3.6.1.4.1.8691.7.108.1.14.1.1.2 | integer | read-write |
Trunking Group Type. Enumeration: 'lacp': 2, 'static': 1. |
| trunkMemberPorts | 1.3.6.1.4.1.8691.7.108.1.14.1.1.3 | portlist | read-write |
Trunking Group Member Ports. |
| trunkTable | 1.3.6.1.4.1.8691.7.108.1.14.2 | no-access |
Port Trunking Table. |
|
| 1.3.6.1.4.1.8691.7.108.1.14.2.1 | no-access |
Port Trunking Entry. |
||
| trunkIndex | 1.3.6.1.4.1.8691.7.108.1.14.2.1.1 | integer | read-only |
Trunking Group Index. |
| trunkPort | 1.3.6.1.4.1.8691.7.108.1.14.2.1.2 | integer | read-only |
Trunking Group Member Port. |
| trunkStatus | 1.3.6.1.4.1.8691.7.108.1.14.2.1.3 | integer | read-only |
Trunking Port Status. Enumeration: 'fail': 2, 'standby': 3, 'success': 1. |
| commRedundancy | 1.3.6.1.4.1.8691.7.108.1.16 | |||
| protocolOfRedundancySetup | 1.3.6.1.4.1.8691.7.108.1.16.1 | integer | read-write |
This set the redundancy protocol of this switch. Enumeration: 'turboRingV2': 3, 'spanningTree': 1, 'turboRing': 2, 'mstp': 5, 'turboChain': 4. |
| turboRing | 1.3.6.1.4.1.8691.7.108.1.16.2 | |||
| turboRingMaster | 1.3.6.1.4.1.8691.7.108.1.16.2.1 | integer | read-only |
Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0. |
| turboRingMasterSetup | 1.3.6.1.4.1.8691.7.108.1.16.2.2 | integer | read-write |
Set this to be Master. Enumeration: 'yes': 1, 'no': 0. |
| turboRingPortTable | 1.3.6.1.4.1.8691.7.108.1.16.2.3 | no-access |
Turbo Ring Port Table. |
|
| 1.3.6.1.4.1.8691.7.108.1.16.2.3.1 | no-access |
Turbo Ring Port Entry. |
||
| turboRingPortIndex | 1.3.6.1.4.1.8691.7.108.1.16.2.3.1.1 | integer | read-only |
Turbo Ring Port Index. |
| turboRingPortStatus | 1.3.6.1.4.1.8691.7.108.1.16.2.3.1.2 | integer | read-only |
Turbo Ring Port Status. Enumeration: 'portDisabled': 0, 'linkDown': 2, 'learning': 4, 'forwarding': 5, 'notTurboRingPort': 1, 'blocked': 3. |
| turboRingPortDesignatedBridge | 1.3.6.1.4.1.8691.7.108.1.16.2.3.1.3 | macaddress | read-only |
The MAC address of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| turboRingPortDesignatedPort | 1.3.6.1.4.1.8691.7.108.1.16.2.3.1.4 | integer | read-only |
The Port Number of the port on the Designated Bridge for this port's segment. |
| turboRingDesignatedMaster | 1.3.6.1.4.1.8691.7.108.1.16.2.6 | macaddress | read-only |
The MAC address of the bridge which is the Master of the TURBO RING. |
| turboRingRdntPort1 | 1.3.6.1.4.1.8691.7.108.1.16.2.7 | integer | read-write |
The port number of 1st Redundant Port on the TURBO RING. |
| turboRingRdntPort2 | 1.3.6.1.4.1.8691.7.108.1.16.2.8 | integer | read-write |
The port number of 2nd Redundant Port on the TURBO RING. |
| turboRingEnableCoupling | 1.3.6.1.4.1.8691.7.108.1.16.2.9 | integer | read-write |
This enable the ring coupling function. Enumeration: 'enable': 1, 'disable': 0. |
| turboRingCouplingPort | 1.3.6.1.4.1.8691.7.108.1.16.2.10 | integer | read-write |
The coupling port of ring coupling function. |
| turboRingCouplingPortStatus | 1.3.6.1.4.1.8691.7.108.1.16.2.11 | integer | read-only |
The coupling port status of ring coupling function. Enumeration: 'notCouplingPort': 1, 'forwarding': 5, 'linkDown': 2, 'portDisabled': 0, 'blocked': 3. |
| turboRingControlPort | 1.3.6.1.4.1.8691.7.108.1.16.2.12 | integer | read-write |
The control port of ring coupling function. |
| turboRingControlPortStatus | 1.3.6.1.4.1.8691.7.108.1.16.2.13 | integer | read-only |
The control port status of ring coupling function. Enumeration: 'portDisabled': 0, 'linkDown': 2, 'inactive': 6, 'active': 7, 'notControlPort': 1, 'forwarding': 5, 'blocked': 3. |
| turboRingBrokenStatus | 1.3.6.1.4.1.8691.7.108.1.16.2.14 | integer | read-only |
Turbo Ring broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1. |
| spanningTree | 1.3.6.1.4.1.8691.7.108.1.16.3 | |||
| spanningTreeRoot | 1.3.6.1.4.1.8691.7.108.1.16.3.1 | integer | read-only |
The root of spanning tree. Enumeration: 'yes': 1, 'no': 0. |
| spanningTreeBridgePriority | 1.3.6.1.4.1.8691.7.108.1.16.3.2 | integer | read-write |
The bridge priority of spanning tree protocol. Enumeration: 'priority4096': 4096, 'priority40960': 40960, 'priority32768': 32768, 'priority24576': 24576, 'priority36864': 36864, 'priority20480': 20480, 'priority12288': 12288, 'priority8192': 8192, 'priority0': 0, 'priority57344': 57344, 'priority49152': 49152, 'priority45056': 45056, 'priority61440': 61440, 'priority53248': 53248, 'priority28672': 28672, 'priority16384': 16384. |
| spanningTreeHelloTime | 1.3.6.1.4.1.8691.7.108.1.16.3.3 | integer | read-write |
The hello time of spanning tree protocol. |
| spanningTreeMaxAge | 1.3.6.1.4.1.8691.7.108.1.16.3.4 | integer | read-write |
The max. age of spanning tree protocol. |
| spanningTreeForwardingDelay | 1.3.6.1.4.1.8691.7.108.1.16.3.5 | integer | read-write |
Tje forwarding delay of spanning tree protocol. |
| spanningTreeTable | 1.3.6.1.4.1.8691.7.108.1.16.3.6 | no-access |
The spanning tree table. |
|
| 1.3.6.1.4.1.8691.7.108.1.16.3.6.1 | no-access |
The spanning tree port entry. |
||
| spanningTreeIndex | 1.3.6.1.4.1.8691.7.108.1.16.3.6.1.1 | integer | read-only |
The index of spanning tree table. |
| enableSpanningTree | 1.3.6.1.4.1.8691.7.108.1.16.3.6.1.2 | integer | read-write |
This enable of spanning tree protocol for this port. Enumeration: 'enable': 1, 'disable': 0. |
| spanningTreePortPriority | 1.3.6.1.4.1.8691.7.108.1.16.3.6.1.3 | integer | read-write |
The port priority of spanning tree protocol. Enumeration: 'priority144': 144, 'priority224': 224, 'priority64': 64, 'priority48': 48, 'priority32': 32, 'priority80': 80, 'priority112': 112, 'priority160': 160, 'priority96': 96, 'priority0': 0, 'priority208': 208, 'priority240': 240, 'priority16': 16, 'priority128': 128, 'priority192': 192, 'priority176': 176. |
| spanningTreePortCost | 1.3.6.1.4.1.8691.7.108.1.16.3.6.1.4 | integer | read-write |
The port cost of spanning tree protocol. |
| spanningTreePortStatus | 1.3.6.1.4.1.8691.7.108.1.16.3.6.1.5 | integer | read-only |
The port status of spanning tree protocol. Enumeration: 'portDisabled': 0, 'notSpanningTreePort': 1, 'linkDown': 2, 'learning': 4, 'forwarding': 5, 'blocked': 3. |
| spanningTreePortEdge | 1.3.6.1.4.1.8691.7.108.1.16.3.6.1.6 | integer | read-write |
This configures the Edge Port property for this port. Enumeration: 'auto': 0, 'false': 2, 'true': 1. |
| activeProtocolOfRedundancy | 1.3.6.1.4.1.8691.7.108.1.16.4 | integer | read-only |
This shows the active redundancy protocol of this switch now. The none(0) stauts will be showed if only if the switch's redundancy protocol is set to spanning tree and none of ports enable spanning tree. Enumeration: 'none': 0, 'turboRingV2': 3, 'turboRing': 2, 'mstp': 5, 'spanningTree': 1, 'turboChain': 4. |
| turboRingV2 | 1.3.6.1.4.1.8691.7.108.1.16.5 | |||
| turboRingV2Ring1 | 1.3.6.1.4.1.8691.7.108.1.16.5.1 | |||
| ringIndexRing1 | 1.3.6.1.4.1.8691.7.108.1.16.5.1.1 | integer | read-only |
The turboRingV2 Ring Index. |
| ringEnableRing1 | 1.3.6.1.4.1.8691.7.108.1.16.5.1.2 | integer | read-write |
The turboRingV2 Ring1 Enalbe Config. Enumeration: 'enable': 1, 'disable': 0. |
| masterSetupRing1 | 1.3.6.1.4.1.8691.7.108.1.16.5.1.3 | integer | read-write |
Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0. |
| masterStatusRing1 | 1.3.6.1.4.1.8691.7.108.1.16.5.1.4 | integer | read-only |
Set this to be Master. Enumeration: 'yes': 1, 'no': 0. |
| designatedMasterRing1 | 1.3.6.1.4.1.8691.7.108.1.16.5.1.5 | macaddress | read-only |
The MAC address of the bridge which is the Master of the turboRingV2. |
| rdnt1stPortRing1 | 1.3.6.1.4.1.8691.7.108.1.16.5.1.6 | integer | read-write |
The port number of 1st Redundant Port on the turboRingV2. |
| rdnt1stPortStatusRing1 | 1.3.6.1.4.1.8691.7.108.1.16.5.1.7 | integer | read-only |
The status of 1st Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1. |
| rdnt2ndPortRing1 | 1.3.6.1.4.1.8691.7.108.1.16.5.1.8 | integer | read-write |
The port number of 2nd Redundant Port on the turboRingV2. |
| rdnt2ndPortStatusRing1 | 1.3.6.1.4.1.8691.7.108.1.16.5.1.9 | integer | read-only |
The status of 2nd Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1. |
| brokenStatusRing1 | 1.3.6.1.4.1.8691.7.108.1.16.5.1.10 | integer | read-only |
turboRingV2 broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1. |
| turboRingV2Ring2 | 1.3.6.1.4.1.8691.7.108.1.16.5.2 | |||
| ringIndexRing2 | 1.3.6.1.4.1.8691.7.108.1.16.5.2.1 | integer | read-only |
The turboRingV2 Ring Index. |
| ringEnableRing2 | 1.3.6.1.4.1.8691.7.108.1.16.5.2.2 | integer | read-write |
The turboRingV2 Ring2 Enalbe Config. Enumeration: 'enable': 1, 'disable': 0. |
| masterSetupRing2 | 1.3.6.1.4.1.8691.7.108.1.16.5.2.3 | integer | read-write |
Is this a Master or Slave. Enumeration: 'yes': 1, 'no': 0. |
| masterStatusRing2 | 1.3.6.1.4.1.8691.7.108.1.16.5.2.4 | integer | read-only |
Set this to be Master. Enumeration: 'yes': 1, 'no': 0. |
| designatedMasterRing2 | 1.3.6.1.4.1.8691.7.108.1.16.5.2.5 | macaddress | read-only |
The MAC address of the bridge which is the Master of the turboRingV2. |
| rdnt1stPortRing2 | 1.3.6.1.4.1.8691.7.108.1.16.5.2.6 | integer | read-write |
The port number of 1st Redundant Port on the turboRingV2. |
| rdnt1stPortStatusRing2 | 1.3.6.1.4.1.8691.7.108.1.16.5.2.7 | integer | read-only |
The status of 1st Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1. |
| rdnt2ndPortRing2 | 1.3.6.1.4.1.8691.7.108.1.16.5.2.8 | integer | read-write |
The port number of 2nd Redundant Port on the turboRingV2. |
| rdnt2ndPortStatusRing2 | 1.3.6.1.4.1.8691.7.108.1.16.5.2.9 | integer | read-only |
The status of 2nd Redundant Port on the turboRingV2. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1. |
| brokenStatusRing2 | 1.3.6.1.4.1.8691.7.108.1.16.5.2.10 | integer | read-only |
turboRingV2 broken display. Enumeration: 'na': 0, 'broken': 2, 'normal': 1. |
| turboRingV2Coupling | 1.3.6.1.4.1.8691.7.108.1.16.5.3 | |||
| couplingEnable | 1.3.6.1.4.1.8691.7.108.1.16.5.3.1 | integer | read-write |
Setting the ring coupling enable. Enumeration: 'enable': 1, 'disable': 0. |
| couplingMode | 1.3.6.1.4.1.8691.7.108.1.16.5.3.2 | integer | read-write |
Setting the ring coupling mode. Enumeration: 'couplingBackup': 2, 'couplingPrimary': 3, 'dualHoming': 1. |
| coupling1stPort | 1.3.6.1.4.1.8691.7.108.1.16.5.3.3 | integer | read-write |
If in 'DUAL HOMING' mode,port name is 'Primary port',If in 'COUPLING' mode,port name is 'Coupling port' |
| coupling1stPortStatus | 1.3.6.1.4.1.8691.7.108.1.16.5.3.4 | integer | read-only |
The 1st coupling port status of coupling function. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1. |
| coupling2ndPort | 1.3.6.1.4.1.8691.7.108.1.16.5.3.5 | integer | read-write |
If in 'DUAL HOMING' mode,port name is 'Backup port',If in 'COUPLING' mode,port name is no used. |
| coupling2ndPortStatus | 1.3.6.1.4.1.8691.7.108.1.16.5.3.6 | integer | read-only |
The 2nd coupling port status of coupling function. Enumeration: 'linkdown': 2, 'disabled': 0, 'learning': 4, 'forwarding': 5, 'blocking': 3, 'notRedundant': 1. |
| turboChain | 1.3.6.1.4.1.8691.7.108.1.16.6 | |||
| turboChainRole | 1.3.6.1.4.1.8691.7.108.1.16.6.1 | integer | read-write |
The Role of TURBO CHAIN. Enumeration: 'member': 2, 'head': 1, 'tail': 3. |
| turboChainPort1 | 1.3.6.1.4.1.8691.7.108.1.16.6.2 | integer | read-write |
The port number of 1st Redundant Port on the TURBO CHAIN. If switch role is Turbo Chain Head, this is Head port, If Switch role is Turbo Chain Tail, this is Tail port. |
| turboChainPort2 | 1.3.6.1.4.1.8691.7.108.1.16.6.3 | integer | read-write |
The port number of 2nd Redundant Port on the TURBO CHAIN. It is the member port of TurboChain |
| turboChainPort1Status | 1.3.6.1.4.1.8691.7.108.1.16.6.4 | integer | read-only |
Turbo Chain Port Status. Enumeration: 'na': 5, 'linkDown': 1, 'notTurboChainPort': 0, 'forwarding': 4, 'blocking': 2, 'blocked': 3. |
| turboChainPort2Status | 1.3.6.1.4.1.8691.7.108.1.16.6.5 | integer | read-only |
Turbo Chain Port Status. Enumeration: 'na': 5, 'linkDown': 1, 'notTurboChainPort': 0, 'forwarding': 4, 'blocking': 2, 'blocked': 3. |
| turboChainPort1PartnerBridge | 1.3.6.1.4.1.8691.7.108.1.16.6.6 | macaddress | read-only |
The MAC address of the next bridge |
| turboChainPort2PartnerBridge | 1.3.6.1.4.1.8691.7.108.1.16.6.7 | macaddress | read-only |
The MAC address of the neighbor Turbo Chain switch |
| relayWarning | 1.3.6.1.4.1.8691.7.108.1.17 | |||
| relayWarningTable | 1.3.6.1.4.1.8691.7.108.1.17.11 | no-access |
The relay warning table. |
|
| 1.3.6.1.4.1.8691.7.108.1.17.11.1 | no-access |
Relay Warning Entry. |
||
| relayAlarmIndex | 1.3.6.1.4.1.8691.7.108.1.17.11.1.1 | integer | read-only |
The Relay alarm index. |
| relayWarningRelayContact | 1.3.6.1.4.1.8691.7.108.1.17.11.1.2 | integer | read-only |
The first Relay contact status. Enumeration: 'opened': 1, 'closed': 0. |
| overrideRelayWarningSetting | 1.3.6.1.4.1.8691.7.108.1.17.11.1.3 | integer | read-write |
Override the relay warning setting. Enumeration: 'yes': 1, 'no': 0. |
| relayWarningPower1Off | 1.3.6.1.4.1.8691.7.108.1.17.11.1.4 | integer | read-write |
The relay contact will be opened while the first power input off. Enumeration: 'enable': 1, 'disable': 0. |
| relayWarningPower1OffStatus | 1.3.6.1.4.1.8691.7.108.1.17.11.1.5 | integer | read-only |
The relay contact is opened as the first power input off.. Enumeration: 'triggered': 1, 'not-triggered': 0. |
| relayWarningPower2Off | 1.3.6.1.4.1.8691.7.108.1.17.11.1.6 | integer | read-write |
The relay contact will be opened while the second power input off. Enumeration: 'enable': 1, 'disable': 0. |
| relayWarningPower2OffStatus | 1.3.6.1.4.1.8691.7.108.1.17.11.1.7 | integer | read-only |
The relay contact is opened as the second power input off. Enumeration: 'triggered': 1, 'not-triggered': 0. |
| relayWarningTurboRingBreak | 1.3.6.1.4.1.8691.7.108.1.17.11.1.8 | integer | read-write |
The relay contact will be opened while turbo ring break. Enumeration: 'enable': 1, 'disable': 0. |
| relayWarningTurboRingBreakStatus | 1.3.6.1.4.1.8691.7.108.1.17.11.1.9 | integer | read-only |
The relay contact is opened while turbo ring is broken. Enumeration: 'triggered': 1, 'not-triggered': 0. |
| portRelayWarningTable | 1.3.6.1.4.1.8691.7.108.1.17.12 | no-access |
The relay warning port table. |
|
| 1.3.6.1.4.1.8691.7.108.1.17.12.1 | no-access |
Port Relay Warning Entry. |
||
| relayWarningLinkChanged | 1.3.6.1.4.1.8691.7.108.1.17.12.1.1 | integer | read-write |
The relay contact will be opened while this port's link status is changed. Enumeration: 'ignore': 0, 'on2off': 1, 'off2on': 2. |
| relayWarningLinkChangedStatus | 1.3.6.1.4.1.8691.7.108.1.17.12.1.2 | integer | read-only |
The relay contact is opened as this port's link status is changed. Enumeration: 'triggered': 1, 'not-triggered': 0. |
| relayWarningTrafficOverload | 1.3.6.1.4.1.8691.7.108.1.17.12.1.3 | integer | read-write |
The relay contact will be opened while this port's traffic is overload. Enumeration: 'enable': 1, 'disable': 0. |
| relayWarningTrafficOverloadStatus | 1.3.6.1.4.1.8691.7.108.1.17.12.1.4 | integer | read-only |
The relay contact is opened as this port's traffic is overload. Enumeration: 'triggered': 1, 'not-triggered': 0. |
| relayWarningRxTrafficThreshold | 1.3.6.1.4.1.8691.7.108.1.17.12.1.5 | integer | read-write |
The threshold of the port traffic will be over loading. |
| relayWarningTrafficDuration | 1.3.6.1.4.1.8691.7.108.1.17.12.1.6 | integer | read-write |
The duration of the port traffic will be over loading. |
| diRelayWarningTable | 1.3.6.1.4.1.8691.7.108.1.17.13 | no-access |
The relay warning DI table. |
|
| 1.3.6.1.4.1.8691.7.108.1.17.13.1 | no-access |
DI Relay Warning Entry. |
||
| relayWarningDiInputChanged | 1.3.6.1.4.1.8691.7.108.1.17.13.1.1 | integer | read-write |
The relay contact will be opened while the DI input changed. Enumeration: 'on': 2, 'disable': 0, 'off': 1. |
| relayWarningDiInputChangedStatus | 1.3.6.1.4.1.8691.7.108.1.17.13.1.2 | integer | read-only |
The relay contact is opened as the first DI input changed.. Enumeration: 'triggered': 1, 'not-triggered': 0. |
| trafficPrioritization | 1.3.6.1.4.1.8691.7.108.1.18 | |||
| qosClassification | 1.3.6.1.4.1.8691.7.108.1.18.1 | |||
| schedulingMechanism | 1.3.6.1.4.1.8691.7.108.1.18.1.1 | integer | read-write |
The scheduling mechanism. Enumeration: 'schedweightfair': 0, 'schedstrict': 1. |
| qosPortTable | 1.3.6.1.4.1.8691.7.108.1.18.1.2 | no-access |
The QoS port table. |
|
| 1.3.6.1.4.1.8691.7.108.1.18.1.2.1 | no-access |
The QoS Port Entry. |
||
| dscpInspection | 1.3.6.1.4.1.8691.7.108.1.18.1.2.1.1 | integer | read-write |
This enable the inspection of dscp field. Enumeration: 'yes': 1, 'no': 0. |
| cosInspection | 1.3.6.1.4.1.8691.7.108.1.18.1.2.1.2 | integer | read-write |
This enable the inspection of CoS field. Enumeration: 'yes': 1, 'no': 0. |
| portPriority | 1.3.6.1.4.1.8691.7.108.1.18.1.2.1.3 | integer | read-write |
The deault priority of the port. Enumeration: 'priority1': 1, 'priority0': 0, 'priority3': 3, 'priority2': 2, 'priority5': 5, 'priority4': 4, 'priority7': 7, 'priority6': 6. |
| priorityMapping | 1.3.6.1.4.1.8691.7.108.1.18.2 | |||
| priorityMappingTable | 1.3.6.1.4.1.8691.7.108.1.18.2.1 | no-access |
The priority mapping table. |
|
| 1.3.6.1.4.1.8691.7.108.1.18.2.1.1 | no-access |
The Priority mapping Entry. |
||
| priorityTag | 1.3.6.1.4.1.8691.7.108.1.18.2.1.1.1 | integer | read-only |
The priority tag of QOS field. |
| priorityMappedQueue | 1.3.6.1.4.1.8691.7.108.1.18.2.1.1.2 | integer | read-write |
The egress queue corresponding to it's priority value. Enumeration: 'trafficclass2': 2, 'trafficclass3': 3, 'trafficclass0': 0, 'trafficclass1': 1. |
| dscpMapping | 1.3.6.1.4.1.8691.7.108.1.18.3 | |||
| dscpMappingTable | 1.3.6.1.4.1.8691.7.108.1.18.3.1 | no-access |
The DSCP mapping table. |
|
| 1.3.6.1.4.1.8691.7.108.1.18.3.1.1 | no-access |
DSCP mapping Entry. |
||
| dscpClass | 1.3.6.1.4.1.8691.7.108.1.18.3.1.1.1 | integer | read-only |
The DSCP class of TOS field. |
| dscpMappedPriority | 1.3.6.1.4.1.8691.7.108.1.18.3.1.1.2 | integer | read-write |
The frame's priority corresponding to it's DSCP class value. Enumeration: 'priority1': 1, 'priority0': 0, 'priority3': 3, 'priority2': 2, 'priority5': 5, 'priority4': 4, 'priority7': 7, 'priority6': 6. |
| vlan | 1.3.6.1.4.1.8691.7.108.1.19 | |||
| vlanPortSettingTable | 1.3.6.1.4.1.8691.7.108.1.19.1 | no-access |
The vlan seting table of ports. |
|
| 1.3.6.1.4.1.8691.7.108.1.19.1.1 | no-access |
Port Setting Entry of VLAN. |
||
| portVlanType | 1.3.6.1.4.1.8691.7.108.1.19.1.1.1 | integer | read-write |
The vlan type of port. Enumeration: 'access': 0, 'hybrid': 2, 'trunk': 1. |
| portDefaultVid | 1.3.6.1.4.1.8691.7.108.1.19.1.1.2 | integer | read-write |
The PVID of port. |
| portFixedVid | 1.3.6.1.4.1.8691.7.108.1.19.1.1.3 | displaystring | read-write |
The fixed vids of (trunk) port. |
| portForbiddenVid | 1.3.6.1.4.1.8691.7.108.1.19.1.1.4 | displaystring | read-write |
The forbidden vids of (trunk)port. |
| portFixedVidUntag | 1.3.6.1.4.1.8691.7.108.1.19.1.1.5 | displaystring | read-write |
The fixed untag vids of (trunk) port. |
| vlanTable | 1.3.6.1.4.1.8691.7.108.1.19.2 | no-access |
The VLAN table. |
|
| 1.3.6.1.4.1.8691.7.108.1.19.2.1 | no-access |
VLAN Entry. |
||
| vlanId | 1.3.6.1.4.1.8691.7.108.1.19.2.1.1 | integer | read-only |
The VLAN id. |
| joinedAccessPorts | 1.3.6.1.4.1.8691.7.108.1.19.2.1.2 | portlist | read-only |
The access ports that joined this VID. |
| joinedTrunkPorts | 1.3.6.1.4.1.8691.7.108.1.19.2.1.3 | portlist | read-only |
The trunk ports that joined this VID. |
| joinedHybridPorts | 1.3.6.1.4.1.8691.7.108.1.19.2.1.4 | portlist | read-only |
The hybrid ports that joined this VID. |
| vlanName | 1.3.6.1.4.1.8691.7.108.1.19.2.1.5 | displaystring | read-write |
The VLAN name. |
| managementVlanId | 1.3.6.1.4.1.8691.7.108.1.19.3 | integer | read-write |
The management VLAN id. |
| vlanType | 1.3.6.1.4.1.8691.7.108.1.19.4 | integer | read-write |
VLAN Type. Enumeration: 'tagBased': 0, 'portBased': 1. |
| portbaseVlanSettingTable | 1.3.6.1.4.1.8691.7.108.1.19.5 | no-access |
Port base Vlan Setting Table. |
|
| 1.3.6.1.4.1.8691.7.108.1.19.5.1 | no-access |
Port base Vlan Setting Entry. |
||
| portbaseVlanSettingIndex | 1.3.6.1.4.1.8691.7.108.1.19.5.1.1 | integer | read-only |
port base Vlan Group Index. |
| portbaseVlanMemberPorts | 1.3.6.1.4.1.8691.7.108.1.19.5.1.2 | portlist | read-write |
port base Vlan Group Member Ports. |
| enableGvrp | 1.3.6.1.4.1.8691.7.108.1.19.6 | integer | read-write |
Enable GVRP. Enumeration: 'enable': 1, 'disable': 0. |
| multicastFiltering | 1.3.6.1.4.1.8691.7.108.1.20 | |||
| igmpSnooping | 1.3.6.1.4.1.8691.7.108.1.20.1 | |||
| querierQueryInterval | 1.3.6.1.4.1.8691.7.108.1.20.1.1 | integer | read-write |
This query interval of the querier function for this VLAN. |
| igmpSnoopingSettingTable | 1.3.6.1.4.1.8691.7.108.1.20.1.2 | no-access |
The IGMP snooping setting table. |
|
| 1.3.6.1.4.1.8691.7.108.1.20.1.2.1 | no-access |
The IGMP snooping setting Entry. |
||
| enableIgmpSnooping | 1.3.6.1.4.1.8691.7.108.1.20.1.2.1.1 | integer | read-write |
This enable the IGMP snooping functon in this VLAN. Enumeration: 'enable': 1, 'disable': 0. |
| enableQuerier | 1.3.6.1.4.1.8691.7.108.1.20.1.2.1.2 | integer | read-write |
This enable the querier function for this VLAN. Enumeration: 'igmpv3': 2, 'igmpv2': 1, 'disable': 0. |
| fixedMulticastQuerierPorts | 1.3.6.1.4.1.8691.7.108.1.20.1.2.1.3 | portlist | read-write |
The ports that multicast-Querier exist. |
| learnedMulticastQuerierPorts | 1.3.6.1.4.1.8691.7.108.1.20.1.2.1.4 | portlist | read-only |
The ports that multicast-Querier exist. |
| enableGlobalIgmpSnooping | 1.3.6.1.4.1.8691.7.108.1.20.1.4 | integer | read-write |
This enable the IGMP snooping functon . Enumeration: 'enable': 1, 'disable': 0. |
| multicastFastForwarding | 1.3.6.1.4.1.8691.7.108.1.20.1.7 | integer | read-write |
This Enable Multicast Fast Forwarding Mode functon . Enumeration: 'enable': 1, 'disable': 0. |
| staticMulticast | 1.3.6.1.4.1.8691.7.108.1.20.2 | |||
| staticMulticastTable | 1.3.6.1.4.1.8691.7.108.1.20.2.1 | no-access |
The static multicast table. |
|
| 1.3.6.1.4.1.8691.7.108.1.20.2.1.1 | no-access |
Static multicast Entry. |
||
| staticMulticastAddress | 1.3.6.1.4.1.8691.7.108.1.20.2.1.1.1 | macaddress | read-only |
The static multicast address. |
| staticMulticastPorts | 1.3.6.1.4.1.8691.7.108.1.20.2.1.1.2 | portlist | read-only |
The port map of the static multicast address. |
| staticMulticastStatus | 1.3.6.1.4.1.8691.7.108.1.20.2.1.1.3 | integer | read-only |
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5. |
| gmrp | 1.3.6.1.4.1.8691.7.108.1.20.3 | |||
| gmrpSettingTable | 1.3.6.1.4.1.8691.7.108.1.20.3.1 | no-access |
The GMRP setting table. |
|
| 1.3.6.1.4.1.8691.7.108.1.20.3.1.1 | no-access |
The GMRP Setting Entry. |
||
| enableGMRP | 1.3.6.1.4.1.8691.7.108.1.20.3.1.1.1 | integer | read-write |
Enable/Disable GMRP. Enumeration: 'enable': 1, 'disable': 0. |
| gmrpTable | 1.3.6.1.4.1.8691.7.108.1.20.3.2 | no-access |
The GMRP status table. |
|
| 1.3.6.1.4.1.8691.7.108.1.20.3.2.1 | no-access |
The GMRP Status Entry. |
||
| gmrpMulticastGroup | 1.3.6.1.4.1.8691.7.108.1.20.3.2.1.1 | macaddress | read-only |
GMRP multicast group. |
| gmrpFixedPorts | 1.3.6.1.4.1.8691.7.108.1.20.3.2.1.2 | portlist | read-only |
The ports that joined GMRP multicast group manually. |
| gmrpLearnedPorts | 1.3.6.1.4.1.8691.7.108.1.20.3.2.1.3 | portlist | read-only |
The ports that joined GMRP multicast group by GMRP learning. |
| rateLimiting | 1.3.6.1.4.1.8691.7.108.1.21 | |||
| droppacketModeRateLimitingIngressTable | 1.3.6.1.4.1.8691.7.108.1.21.1 | no-access |
The rate limiting table. |
|
| 1.3.6.1.4.1.8691.7.108.1.21.1.1 | no-access |
Rate limiting Entry. |
||
| ingressLimitRate | 1.3.6.1.4.1.8691.7.108.1.21.1.1.1 | integer | read-write |
The ingress limit mode. Enumeration: 'percentage85': 9, 'percentage65': 8, 'percentage03': 1, 'percentage35': 6, 'notlimited': 0, 'percentage50': 7, 'percentage05': 2, 'percentage15': 4, 'percentage25': 5, 'percentage10': 3. |
| broadcastStormProtection | 1.3.6.1.4.1.8691.7.108.1.21.2 | |||
| bcastStormProtection | 1.3.6.1.4.1.8691.7.108.1.21.2.1 | integer | read-write |
Broadcast Storm Protection Enumeration: 'enable': 1, 'disable': 0. |
| bcastStormProtectionIncludeMcast | 1.3.6.1.4.1.8691.7.108.1.21.2.2 | integer | read-write |
Broadcast Storm Protection includes Multicast packets Enumeration: 'yes': 1, 'no': 0. |
| bcastStormProtectionIncludeUcast | 1.3.6.1.4.1.8691.7.108.1.21.2.3 | integer | read-write |
Broadcast Storm Protection includes Unicast packets Enumeration: 'yes': 1, 'no': 0. |
| portDisableMode | 1.3.6.1.4.1.8691.7.108.1.21.3 | |||
| portDisableModePeriod | 1.3.6.1.4.1.8691.7.108.1.21.3.1 | integer | read-write |
Check time. |
| portDisableModeTable | 1.3.6.1.4.1.8691.7.108.1.21.3.2 | no-access |
The rate limiting table. |
|
| 1.3.6.1.4.1.8691.7.108.1.21.3.2.1 | no-access |
Rate limiting Entry. |
||
| ingressLimit | 1.3.6.1.4.1.8691.7.108.1.21.3.2.1.1 | integer | read-write |
The ingress limit mode. Enumeration: 'rateMega4Fps22322': 4, 'rateMega1Fps4464': 1, 'rateGiga6Fps520840': 13, 'rateMega7Fps74405': 7, 'rateGiga3Fps148810': 10, 'rateGiga2Fps74410': 9, 'rateGiga7Fps744050': 14, 'notlimited': 0, 'rateGiga5Fps372030': 12, 'rateMega3Fps14881': 3, 'rateMega2Fps7441': 2, 'rateMega5Fps37203': 5, 'rateGiga1Fps44640': 8, 'rateGiga4Fps223220': 11, 'rateMega6Fps52084': 6. |
| rateLimitingAction | 1.3.6.1.4.1.8691.7.108.1.21.4 | integer | read-write |
The rate limiting mode. Enumeration: 'droppacket': 0, 'portDisable': 1. |
| security | 1.3.6.1.4.1.8691.7.108.1.22 | |||
| userLoginSetting | 1.3.6.1.4.1.8691.7.108.1.22.1 | |||
| userLoginServer | 1.3.6.1.4.1.8691.7.108.1.22.1.1 | integer | read-write |
Set user login server option. Enumeration: 'tacacs': 3, 'radius': 4, 'tacacsLocal': 1, 'radiusLocal': 2, 'local': 5. |
| tacacsServerSetting | 1.3.6.1.4.1.8691.7.108.1.22.1.2 | |||
| tacacsLoginAuthServer | 1.3.6.1.4.1.8691.7.108.1.22.1.2.1 | displaystring | read-write |
Set Tacacs+ Server IP Address/Domain name. |
| tacacsLoginAuthPort | 1.3.6.1.4.1.8691.7.108.1.22.1.2.2 | integer | read-write |
Set Tacacs+ Port. |
| tacacsLoginAuthSharedKey | 1.3.6.1.4.1.8691.7.108.1.22.1.2.3 | displaystring | read-write |
Set Tacacs+ Shared Key. |
| tacacsLoginAuthAuthType | 1.3.6.1.4.1.8691.7.108.1.22.1.2.4 | integer | read-write |
Set Tacacs+ Shared Key. Enumeration: 'pap': 1, 'mschap': 4, 'chap': 2, 'ascii': 0. |
| tacacsLoginAuthTimeout | 1.3.6.1.4.1.8691.7.108.1.22.1.2.5 | integer | read-write |
Set Tacacs+ Shared Key. |
| radiusServerSetting | 1.3.6.1.4.1.8691.7.108.1.22.1.3 | |||
| radiusLoginAuthServer | 1.3.6.1.4.1.8691.7.108.1.22.1.3.1 | displaystring | read-write |
Set Radius Server IP Address/Domain name. |
| radiusLoginAuthPort | 1.3.6.1.4.1.8691.7.108.1.22.1.3.2 | integer | read-write |
Set Radius Port. |
| radiusLoginAuthSharedKey | 1.3.6.1.4.1.8691.7.108.1.22.1.3.3 | displaystring | read-write |
Set Radius Shared Key. |
| radiusLoginAuthAuthType | 1.3.6.1.4.1.8691.7.108.1.22.1.3.4 | integer | read-write |
Set Radius Shared Key. Enumeration: 'pap': 0, 'chap': 1. |
| radiusLoginAuthTimeout | 1.3.6.1.4.1.8691.7.108.1.22.1.3.5 | integer | read-write |
Set Radius Shared Key. |
| portAccessControl | 1.3.6.1.4.1.8691.7.108.1.22.2 | |||
| staticPortLockLegacy | 1.3.6.1.4.1.8691.7.108.1.22.2.1 | |||
| staticPortLockLegacyAddress | 1.3.6.1.4.1.8691.7.108.1.22.2.1.1 | macaddress | read-only |
The static port lock address. |
| staticPortLockLegacyPort | 1.3.6.1.4.1.8691.7.108.1.22.2.1.2 | integer | read-only |
The port of the static port lock address. |
| staticPortLockLegacyStatus | 1.3.6.1.4.1.8691.7.108.1.22.2.1.3 | integer | read-only |
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Enumeration: 'active': 1, 'createAndGo': 4. |
| dot1x | 1.3.6.1.4.1.8691.7.108.1.22.2.2 | |||
| dataBaseOption | 1.3.6.1.4.1.8691.7.108.1.22.2.2.1 | integer | read-write |
Set IEEE 802.1X database option. Enumeration: 'radius': 2, 'radiuslocal': 3, 'local': 1. |
| dot1xReauthEnable | 1.3.6.1.4.1.8691.7.108.1.22.2.2.5 | integer | read-write |
Enable/Disable IEEE 802.1X Re-authentication. Enumeration: 'enable': 1, 'disable': 0. |
| dot1xReauthPeriod | 1.3.6.1.4.1.8691.7.108.1.22.2.2.6 | integer | read-write |
Set IEEE 802.1X Re-authentication Period. |
| dot1xSettingTable | 1.3.6.1.4.1.8691.7.108.1.22.2.2.7 | no-access |
IEEE 802.1X Port Setting Table. |
|
| 1.3.6.1.4.1.8691.7.108.1.22.2.2.7.1 | no-access |
IEEE 802.1X Port Setting Entry. |
||
| enableDot1X | 1.3.6.1.4.1.8691.7.108.1.22.2.2.7.1.1 | integer | read-write |
Enable/Disable IEEE 802.1X. Enumeration: 'enable': 1, 'disable': 0. |
| dot1xReauthTable | 1.3.6.1.4.1.8691.7.108.1.22.2.2.8 | no-access |
IEEE 802.1X Re-authentication Table. |
|
| 1.3.6.1.4.1.8691.7.108.1.22.2.2.8.1 | no-access |
IEEE 802.1X Re-authentication Entry. |
||
| dot1xReauthPortIndex | 1.3.6.1.4.1.8691.7.108.1.22.2.2.8.1.1 | integer | read-only |
IEEE 802.1X Enabled Port Index. |
| dot1xReauth | 1.3.6.1.4.1.8691.7.108.1.22.2.2.8.1.2 | integer | read-write |
Reauth IEEE 802.1X. Enumeration: 'yes': 1, 'no': 0. |
| dot1xRadius | 1.3.6.1.4.1.8691.7.108.1.22.2.2.9 | |||
| dot1xSameAsAuthServer | 1.3.6.1.4.1.8691.7.108.1.22.2.2.9.1 | integer | read-write |
Set Radius Server IP Address/Domain name. Enumeration: 'notSame': 0, 'same': 1. |
| dot1x1stRadiusServer | 1.3.6.1.4.1.8691.7.108.1.22.2.2.9.2 | displaystring | read-write |
Set Radius Server IP Address/Domain name. |
| dot1x1stRadiusPort | 1.3.6.1.4.1.8691.7.108.1.22.2.2.9.3 | integer | read-write |
Set Radius Port. |
| dot1x1stRadiusSharedKey | 1.3.6.1.4.1.8691.7.108.1.22.2.2.9.4 | displaystring | read-write |
Set Radius Shared Key. |
| dot1x2ndRadiusServer | 1.3.6.1.4.1.8691.7.108.1.22.2.2.9.5 | displaystring | read-write |
Set Radius Server IP Address/Domain name. |
| dot1x2ndRadiusPort | 1.3.6.1.4.1.8691.7.108.1.22.2.2.9.6 | integer | read-write |
Set Radius Port. |
| dot1x2ndRadiusSharedKey | 1.3.6.1.4.1.8691.7.108.1.22.2.2.9.7 | displaystring | read-write |
Set Radius Shared Key. |
| portAccessControlTable | 1.3.6.1.4.1.8691.7.108.1.22.2.3 | no-access |
The Port Access Control table. |
|
| 1.3.6.1.4.1.8691.7.108.1.22.2.3.1 | no-access |
The Port Access Control table entry. |
||
| portAccessControlAddress | 1.3.6.1.4.1.8691.7.108.1.22.2.3.1.1 | macaddress | read-only |
The MAC address which is static locked or IEEE 802.1X authorized. |
| portAccessControlPortNo | 1.3.6.1.4.1.8691.7.108.1.22.2.3.1.2 | integer | read-only |
The port number that the Port Access Control address resides. |
| portAccessControlAccessStatus | 1.3.6.1.4.1.8691.7.108.1.22.2.3.1.3 | integer | read-only |
The access status of the Port Access Control address. Enumeration: 'macAddrSticky': 5, 'staticLock': 1, 'authorized': 2, 'unAuthorized': 3, 'authorizing': 4. |
| portAccessControlStatus | 1.3.6.1.4.1.8691.7.108.1.22.2.3.1.4 | integer | read-only |
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5. |
| portAccessControlVid | 1.3.6.1.4.1.8691.7.108.1.22.2.3.1.5 | integer | read-only |
The vid number that the Port Access Control address resides. |
| portSecurity | 1.3.6.1.4.1.8691.7.108.1.22.2.4 | |||
| portSecurityModeTable | 1.3.6.1.4.1.8691.7.108.1.22.2.4.1 | no-access |
Port security mode |
|
| 1.3.6.1.4.1.8691.7.108.1.22.2.4.1.1 | no-access |
Port security mode entry. |
||
| portSecurityModePort | 1.3.6.1.4.1.8691.7.108.1.22.2.4.1.1.1 | integer | read-only |
Set port security mode to specific port. |
| portSecurityModeSelect | 1.3.6.1.4.1.8691.7.108.1.22.2.4.1.1.2 | integer | read-only |
Select the port security mode of the port. Enumeration: 'normal-mode': 0, 'static-portlock': 1, 'mac-address-sticky': 2. |
| portSecurityModeLimit | 1.3.6.1.4.1.8691.7.108.1.22.2.4.1.1.3 | integer | read-only |
If port security mode is MAC address sticky, set the limit of the port. If port security mode is not MAC address sticky, set the limit to 0. |
| portSecurityModeViolationPortDisable | 1.3.6.1.4.1.8691.7.108.1.22.2.4.1.1.4 | integer | read-only |
Enable the violation port disable. Enumeration: 'enable': 1, 'disable': 0. |
| portSecurityModeStatus | 1.3.6.1.4.1.8691.7.108.1.22.2.4.1.1.5 | integer | read-only |
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Enumeration: 'active': 1, 'createAndGo': 4. |
| staticPortLock | 1.3.6.1.4.1.8691.7.108.1.22.2.4.2 | |||
| staticPortLockAddress | 1.3.6.1.4.1.8691.7.108.1.22.2.4.2.1 | macaddress | read-only |
The static port lock address. |
| staticPortLockPort | 1.3.6.1.4.1.8691.7.108.1.22.2.4.2.2 | integer | read-only |
The port of the static port lock address. |
| staticPortLockStatus | 1.3.6.1.4.1.8691.7.108.1.22.2.4.2.3 | integer | read-only |
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Enumeration: 'active': 1, 'createAndGo': 4. |
| staticPortLockVid | 1.3.6.1.4.1.8691.7.108.1.22.2.4.2.4 | integer | read-only |
Add vlan of the static port lock address. For SVL switch, vid should be 0 |
| macAddressSticky | 1.3.6.1.4.1.8691.7.108.1.22.2.4.3 | |||
| macAddressStickyAddress | 1.3.6.1.4.1.8691.7.108.1.22.2.4.3.1 | macaddress | read-only |
Manually add a MAC sticky address. |
| macAddressStickyPort | 1.3.6.1.4.1.8691.7.108.1.22.2.4.3.2 | integer | read-only |
Add MAC sticky address to the specific port. |
| macAddressStickyVid | 1.3.6.1.4.1.8691.7.108.1.22.2.4.3.3 | integer | read-only |
Add MAC sticky address to the specific vlan. For SVL switch, vid should be 0 |
| macAddressStickyStatus | 1.3.6.1.4.1.8691.7.108.1.22.2.4.3.4 | integer | read-only |
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Enumeration: 'active': 1, 'createAndGo': 4. |
| mab | 1.3.6.1.4.1.8691.7.108.1.22.2.5 | |||
| mabDBOption | 1.3.6.1.4.1.8691.7.108.1.22.2.5.1 | integer | read-write |
Set MAB database option. Enumeration: 'radius': 2. |
| mabReauthEnable | 1.3.6.1.4.1.8691.7.108.1.22.2.5.2 | integer | read-write |
Enable/Disable MAB Re-authorizing. Enumeration: 'enable': 1, 'disable': 0. |
| mabReauthPeriod | 1.3.6.1.4.1.8691.7.108.1.22.2.5.3 | integer | read-write |
Set MAB Re-authorizing Period. |
| mabRestartEnable | 1.3.6.1.4.1.8691.7.108.1.22.2.5.4 | integer | read-write |
Enable/Disable MAB Re-start. Enumeration: 'enable': 1, 'disable': 0. |
| mabRestartPeriod | 1.3.6.1.4.1.8691.7.108.1.22.2.5.5 | integer | read-write |
Set MAB Re-start Period. |
| mabSettingTable | 1.3.6.1.4.1.8691.7.108.1.22.2.5.6 | no-access |
MAB Setting Table. |
|
| 1.3.6.1.4.1.8691.7.108.1.22.2.5.6.1 | no-access |
MAB Port Setting Entry. |
||
| enableMAB | 1.3.6.1.4.1.8691.7.108.1.22.2.5.6.1.1 | integer | read-write |
Enable/Disable MAB. Enumeration: 'enable': 1, 'disable': 0. |
| accessibleIP | 1.3.6.1.4.1.8691.7.108.1.30 | |||
| enableAccessibleIP | 1.3.6.1.4.1.8691.7.108.1.30.1 | integer | read-write |
Enable the accessible IP address list. Enumeration: 'enable': 1, 'disable': 0. |
| accessibleIpTable | 1.3.6.1.4.1.8691.7.108.1.30.2 | no-access |
accessibleIP. |
|
| 1.3.6.1.4.1.8691.7.108.1.30.2.1 | no-access |
Accessible IP address entry. |
||
| accessibleIpAddress | 1.3.6.1.4.1.8691.7.108.1.30.2.1.1 | ipaddress | read-only |
Accessible IP address |
| accessibleIpNetMask | 1.3.6.1.4.1.8691.7.108.1.30.2.1.2 | ipaddress | read-only |
Accessible IP netmask. |
| accessibleIpStatus | 1.3.6.1.4.1.8691.7.108.1.30.2.1.3 | integer | read-only |
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5. |
| sysFileUpdate | 1.3.6.1.4.1.8691.7.108.1.31 | |||
| tftpServer | 1.3.6.1.4.1.8691.7.108.1.31.1 | displaystring | read-write |
The TFTP Server name(IP Address) |
| firmwarePathName | 1.3.6.1.4.1.8691.7.108.1.31.2 | displaystring | read-write |
The path name of firmware file in the TFTP Server |
| logPathName | 1.3.6.1.4.1.8691.7.108.1.31.3 | displaystring | read-write |
The path name of log file in the TFTP Server |
| confPathName | 1.3.6.1.4.1.8691.7.108.1.31.4 | displaystring | read-write |
The path name of configuration file in the TFTP Server |
| tftpUpdate | 1.3.6.1.4.1.8691.7.108.1.31.5 | integer | read-only |
Enumeration: 'importConfig': 2, 'importFirmware': 1, 'exportConfig': 3, 'exportLog': 4. |
| timeSetting | 1.3.6.1.4.1.8691.7.108.1.32 | |||
| sysDateTime | 1.3.6.1.4.1.8691.7.108.1.32.1 | dateandtime | read-write |
The date time of system |
| calibratePeriod | 1.3.6.1.4.1.8691.7.108.1.32.2 | integer | read-write |
The period (seconds) that calibrate with time server |
| timeServer1 | 1.3.6.1.4.1.8691.7.108.1.32.3 | displaystring | read-write |
The first time server |
| timeServer2 | 1.3.6.1.4.1.8691.7.108.1.32.4 | displaystring | read-write |
The second time server |
| daylightSaving | 1.3.6.1.4.1.8691.7.108.1.32.5 | |||
| startMonth | 1.3.6.1.4.1.8691.7.108.1.32.5.1 | integer | read-write |
Setting Start Month of Daylight Saving time Enumeration: 'mar': 3, 'feb': 2, 'aug': 8, 'sep': 9, 'apr': 4, 'na': 0, 'jun': 6, 'jul': 7, 'jan': 1, 'may': 5, 'nov': 11, 'dec': 12, 'oct': 10. |
| startWeek | 1.3.6.1.4.1.8691.7.108.1.32.5.2 | integer | read-write |
Setting Start Week of Daylight Saving time Enumeration: 'na': 0, 'weeklast': 6, 'week1': 1, 'week3': 3, 'week2': 2, 'week4': 4. |
| startDay | 1.3.6.1.4.1.8691.7.108.1.32.5.3 | integer | read-write |
Setting Start Day of Daylight Saving time Enumeration: 'wed': 4, 'na': 0, 'th': 5, 'mon': 2, 'sun': 1, 'fri': 6, 'tue': 3, 'sat': 7. |
| startHour | 1.3.6.1.4.1.8691.7.108.1.32.5.4 | integer | read-write |
Setting Start Hour of Daylight Saving time |
| endMonth | 1.3.6.1.4.1.8691.7.108.1.32.5.5 | integer | read-write |
Setting End Month of Daylight Saving time Enumeration: 'mar': 3, 'feb': 2, 'aug': 8, 'sep': 9, 'apr': 4, 'na': 0, 'jun': 6, 'jul': 7, 'jan': 1, 'may': 5, 'nov': 11, 'dec': 12, 'oct': 10. |
| endWeek | 1.3.6.1.4.1.8691.7.108.1.32.5.6 | integer | read-write |
Setting End Week of Daylight Saving time Enumeration: 'na': 0, 'weeklast': 6, 'week1': 1, 'week3': 3, 'week2': 2, 'week4': 4. |
| endDay | 1.3.6.1.4.1.8691.7.108.1.32.5.7 | integer | read-write |
Setting End Day of Daylight Saving time Enumeration: 'wed': 4, 'na': 0, 'th': 5, 'mon': 2, 'sun': 1, 'fri': 6, 'tue': 3, 'sat': 7. |
| endHour | 1.3.6.1.4.1.8691.7.108.1.32.5.8 | integer | read-write |
Setting End Hour of Daylight Saving time |
| offsetHours | 1.3.6.1.4.1.8691.7.108.1.32.5.9 | integer | read-write |
Setting Offset Hours of Daylight Saving time |
| enableNTPServer | 1.3.6.1.4.1.8691.7.108.1.32.6 | integer | read-write |
This enable NTP Server. Enumeration: 'enable': 1, 'disable': 0. |
| clockSource | 1.3.6.1.4.1.8691.7.108.1.32.7 | integer | read-write |
The clock source of system Enumeration: 'ntp': 2, 'local': 0, 'sntp': 1. |
| ntpAuthenticate | 1.3.6.1.4.1.8691.7.108.1.32.8 | integer | read-write |
NTP authentication Enumeration: 'enable': 1, 'disable': 0. |
| ntpPeerTable | 1.3.6.1.4.1.8691.7.108.1.32.9 | no-access |
NTP peer table |
|
| 1.3.6.1.4.1.8691.7.108.1.32.9.1 | no-access |
NTP peer settings |
||
| ntpPeerIndex | 1.3.6.1.4.1.8691.7.108.1.32.9.1.1 | integer | read-only |
NTP peer index |
| ntpPeerAddress | 1.3.6.1.4.1.8691.7.108.1.32.9.1.2 | displaystring | read-write |
NTP peer address |
| ntpPeerAuthenticate | 1.3.6.1.4.1.8691.7.108.1.32.9.1.3 | integer | read-write |
NTP authentication Enumeration: 'enable': 1, 'disable': 0. |
| ntpPeerAuthenticateKeyid | 1.3.6.1.4.1.8691.7.108.1.32.9.1.4 | integer | read-write |
NTP authentication key Id |
| ntpAuthenticateKeyTable | 1.3.6.1.4.1.8691.7.108.1.32.10 | no-access |
NTP authenticate key table |
|
| 1.3.6.1.4.1.8691.7.108.1.32.10.1 | no-access |
NTP authenticate key settings |
||
| ntpAuthenticateKeyIndex | 1.3.6.1.4.1.8691.7.108.1.32.10.1.1 | integer | read-only |
NTP authenticate key index |
| ntpAuthenticateKeyID | 1.3.6.1.4.1.8691.7.108.1.32.10.1.2 | integer | read-write |
NTP authenticate key id |
| ntpAuthenticateKeyString | 1.3.6.1.4.1.8691.7.108.1.32.10.1.3 | displaystring | read-write |
NTP authenticate key string |
| ntpAuthenticateKeyTrusted | 1.3.6.1.4.1.8691.7.108.1.32.10.1.4 | integer | read-write |
NTP authenticate key trusted Enumeration: 'distrust': 0, 'trusted': 1. |
| dipSwitchSetting | 1.3.6.1.4.1.8691.7.108.1.34 | |||
| dipSwitchEnableTurboRing | 1.3.6.1.4.1.8691.7.108.1.34.1 | integer | read-write |
Enable TurboRing Dip Switch functions Enumeration: 'enable': 1, 'disable': 0. |
| dipSwitchTurboRingPole | 1.3.6.1.4.1.8691.7.108.1.34.2 | integer | read-only |
The TurboRing Pole status of Dip switch. Enumeration: 'on': 1, 'off': 0. |
| dipSwitchRingCouplingPole | 1.3.6.1.4.1.8691.7.108.1.34.3 | integer | read-only |
The Ring Coupling Pole status of Dip switch. Enumeration: 'on': 1, 'off': 0. |
| dipSwitchRingMasterPole | 1.3.6.1.4.1.8691.7.108.1.34.4 | integer | read-only |
The Ring Master Pole status of Dip switch. Enumeration: 'on': 1, 'off': 0. |
| backupMediaSetting | 1.3.6.1.4.1.8691.7.108.1.35 | |||
| abc02Status | 1.3.6.1.4.1.8691.7.108.1.35.2 | integer | read-only |
Current status of ABC-02 Enumeration: 'detecting': 2, 'ready-and-removable': 4, 'working': 3, 'device-not-present': 0, 'unauthorized-media': 1. |
| abc02AutoImportConfig | 1.3.6.1.4.1.8691.7.108.1.35.3 | integer | read-write |
Auto load configuration from ABC to system when boot up Enumeration: 'enable': 1, 'disable': 0. |
| abc02AutoExportConfig | 1.3.6.1.4.1.8691.7.108.1.35.4 | integer | read-write |
Auto backup to ABC-02 when configuration change Enumeration: 'enable': 1, 'disable': 0. |
| abc02AutoExportLog | 1.3.6.1.4.1.8691.7.108.1.35.5 | integer | read-write |
Auto backup of event log to prevent overwrite Enumeration: 'enable': 1, 'disable': 0. |
| enableWarmStart | 1.3.6.1.4.1.8691.7.108.1.36 | integer | read-write |
Enable to restart MOXA ethernet switch. Enumeration: 'yes': 1, 'no': 0. |
| syslogSetting | 1.3.6.1.4.1.8691.7.108.1.37 | |||
| syslogServer1 | 1.3.6.1.4.1.8691.7.108.1.37.1 | displaystring | read-write |
The syslog server 1 |
| syslogServer1port | 1.3.6.1.4.1.8691.7.108.1.37.2 | integer | read-write |
The syslog server 1 port |
| syslogServer2 | 1.3.6.1.4.1.8691.7.108.1.37.3 | displaystring | read-write |
The syslog server 2 |
| syslogServer2port | 1.3.6.1.4.1.8691.7.108.1.37.4 | integer | read-write |
The syslog server 2 port |
| syslogServer3 | 1.3.6.1.4.1.8691.7.108.1.37.5 | displaystring | read-write |
The syslog server 3 |
| syslogServer3port | 1.3.6.1.4.1.8691.7.108.1.37.6 | integer | read-write |
The syslog server 3 port |
| dhcpRelayAgentSetting | 1.3.6.1.4.1.8691.7.108.1.39 | |||
| dhcpServer1 | 1.3.6.1.4.1.8691.7.108.1.39.1 | displaystring | read-write |
The dhcp Relay Agent Server 1. |
| dhcpServer2 | 1.3.6.1.4.1.8691.7.108.1.39.2 | displaystring | read-write |
The dhcp Relay Agent Server 2. |
| dhcpServer3 | 1.3.6.1.4.1.8691.7.108.1.39.3 | displaystring | read-write |
The dhcp Relay Agent Server 3. |
| dhcpServer4 | 1.3.6.1.4.1.8691.7.108.1.39.4 | displaystring | read-write |
The dhcp Relay Agent Server 4. |
| option82Setting | 1.3.6.1.4.1.8691.7.108.1.39.5 | |||
| enableOption82 | 1.3.6.1.4.1.8691.7.108.1.39.5.1 | integer | read-write |
Enable DHCP Option 82 Enumeration: 'enable': 1, 'disable': 0. |
| option82Type | 1.3.6.1.4.1.8691.7.108.1.39.5.2 | integer | read-write |
Option 82 Type selector Enumeration: 'client-id': 2, 'ip': 0, 'mac': 1, 'other': 3. |
| option82Value | 1.3.6.1.4.1.8691.7.108.1.39.5.3 | displaystring | read-write |
Option 82 Type Value |
| option82ValueDisplay | 1.3.6.1.4.1.8691.7.108.1.39.5.4 | displaystring | read-only |
Option 82 Type Value Display |
| dhcpFunctionTable | 1.3.6.1.4.1.8691.7.108.1.39.6 | no-access |
DHCP Function Table. |
|
| 1.3.6.1.4.1.8691.7.108.1.39.6.1 | no-access |
DHCP Function Table Entry. |
||
| dhcpPortIndex | 1.3.6.1.4.1.8691.7.108.1.39.6.1.1 | integer | read-only |
The DHCP Port Index. |
| circuitID | 1.3.6.1.4.1.8691.7.108.1.39.6.1.2 | displaystring | read-only |
The Circuit ID. |
| option82Enable | 1.3.6.1.4.1.8691.7.108.1.39.6.1.3 | integer | read-write |
This enable option 82 of the port. Enumeration: 'enable': 1, 'disable': 0. |
| poeSetting | 1.3.6.1.4.1.8691.7.108.1.40 | |||
| poePortTable | 1.3.6.1.4.1.8691.7.108.1.40.3 | no-access |
Poe Port Function Table. |
|
| 1.3.6.1.4.1.8691.7.108.1.40.3.1 | no-access |
Poe Port Function Table Entry. |
||
| poePortIndex | 1.3.6.1.4.1.8691.7.108.1.40.3.1.1 | integer | read-only |
PoE port index. |
| poePortEnable | 1.3.6.1.4.1.8691.7.108.1.40.3.1.2 | integer | read-write |
PoE port Enable. Enumeration: 'enable': 1, 'disable': 0. |
| powerLimit | 1.3.6.1.4.1.8691.7.108.1.40.3.1.4 | integer | read-write |
PoE Port Power Budget |
| pdfailure | 1.3.6.1.4.1.8691.7.108.1.40.3.1.5 | integer | read-write |
PD check Enable per port. Enumeration: 'enable': 1, 'disable': 0. |
| pdipaddr | 1.3.6.1.4.1.8691.7.108.1.40.3.1.6 | displaystring | read-write |
PD ip address. |
| pdPollingInterval | 1.3.6.1.4.1.8691.7.108.1.40.3.1.7 | integer | read-write |
PD check interval |
| poeporttimetabling | 1.3.6.1.4.1.8691.7.108.1.40.3.1.8 | integer | read-write |
PoE port timetabling Enumeration: 'enable': 1, 'disable': 0. |
| poePortLegacyPdDetect | 1.3.6.1.4.1.8691.7.108.1.40.3.1.9 | integer | read-write |
PoE port legacy PD detection Enumeration: 'enable': 1, 'disable': 0. |
| pdNoResponseTimeout | 1.3.6.1.4.1.8691.7.108.1.40.3.1.10 | integer | read-write |
No response timeout times for PD. |
| pdNoResponseAction | 1.3.6.1.4.1.8691.7.108.1.40.3.1.11 | integer | read-write |
PD no response action. Enumeration: 'rebootPD': 1, 'powerOffPD': 2, 'noAction': 0. |
| poePowerOutputMode | 1.3.6.1.4.1.8691.7.108.1.40.3.1.12 | integer | read-write |
PoE port Power Output Mode. Enumeration: 'auto': 0, 'force': 2, 'highPower': 1. |
| poeTimeTable | 1.3.6.1.4.1.8691.7.108.1.40.5 | no-access |
PoE Time Table. |
|
| 1.3.6.1.4.1.8691.7.108.1.40.5.1 | no-access |
PoE Time Table Entry. |
||
| poeTPortIndex | 1.3.6.1.4.1.8691.7.108.1.40.5.1.1 | integer | read-only |
port Index for time table. |
| poeWeekDay | 1.3.6.1.4.1.8691.7.108.1.40.5.1.2 | integer | read-only |
day index for a week. |
| poeDayEnable | 1.3.6.1.4.1.8691.7.108.1.40.5.1.3 | integer | read-write |
Enable or not for one day. Enumeration: 'enable': 1, 'disable': 0. |
| poeDayStart | 1.3.6.1.4.1.8691.7.108.1.40.5.1.4 | integer | read-write |
PoE Port Start Time |
| poeDayStop | 1.3.6.1.4.1.8691.7.108.1.40.5.1.5 | integer | read-write |
PoE Port Stop Time |
| poeStatusTable | 1.3.6.1.4.1.8691.7.108.1.40.6 | no-access |
PoE Status Table. |
|
| 1.3.6.1.4.1.8691.7.108.1.40.6.1 | no-access |
PoE Status Table Entry. |
||
| poePortStatus | 1.3.6.1.4.1.8691.7.108.1.40.6.1.1 | integer | read-only |
PoE port Status. Enumeration: 'enable': 1, 'disable': 0. |
| poePortConsumption | 1.3.6.1.4.1.8691.7.108.1.40.6.1.2 | integer | read-only |
PoE port Consumption Enumeration: 'na': -1. |
| poePortVoltage | 1.3.6.1.4.1.8691.7.108.1.40.6.1.3 | integer | read-only |
PoE port Voltage Enumeration: 'na': -1. |
| poePortCurrent | 1.3.6.1.4.1.8691.7.108.1.40.6.1.4 | integer | read-only |
PoE port Current Enumeration: 'na': -1. |
| poePortPowerOutput | 1.3.6.1.4.1.8691.7.108.1.40.6.1.5 | integer | read-only |
PoE port power output status. Enumeration: 'on': 1, 'off': 0. |
| poePortClass | 1.3.6.1.4.1.8691.7.108.1.40.6.1.6 | integer | read-only |
PoE port class. Enumeration: 'unknown': -1, 'na': -2. |
| poePortPdFailCheck | 1.3.6.1.4.1.8691.7.108.1.40.6.1.7 | integer | read-only |
PoE port PD fail check status. Enumeration: 'disable': 2, 'alive': 1, 'notAlive': 0. |
| poePortPdStatusDescription | 1.3.6.1.4.1.8691.7.108.1.40.6.1.8 | integer | read-only |
PoE port status description. Enumeration: 'powered': 2, 'nic': 3, 'disabled': 0, 'potentialLegacyPD': 6, 'legacyPowered': 5, 'fault': 4, 'notPresent': 1. |
| poeSystemSetting | 1.3.6.1.4.1.8691.7.108.1.40.9 | |||
| poeSysPowerEnable | 1.3.6.1.4.1.8691.7.108.1.40.9.1 | integer | read-write |
PoE system power enable. Enumeration: 'enable': 1, 'disable': 0. |
| poeSysPowerThreshold | 1.3.6.1.4.1.8691.7.108.1.40.9.2 | integer | read-write |
PoE system power threshold. |
| poeSysThresholdCutOff | 1.3.6.1.4.1.8691.7.108.1.40.9.3 | integer | read-write |
PoE system power threshold cut off. Enumeration: 'enable': 1, 'disable': 0. |
| poeSysAllocatedPower | 1.3.6.1.4.1.8691.7.108.1.40.9.4 | integer | read-only |
PoE system allocated power. |
| poeSysMeasuredPower | 1.3.6.1.4.1.8691.7.108.1.40.9.5 | integer | read-only |
PoE system measured power. |
| poeSysPowerBudget | 1.3.6.1.4.1.8691.7.108.1.40.9.7 | integer | read-write |
PoE system power budget. |
| ieee1588Setting | 1.3.6.1.4.1.8691.7.108.1.41 | |||
| ptpv1Setting | 1.3.6.1.4.1.8691.7.108.1.41.1 | |||
| enablePtpv1 | 1.3.6.1.4.1.8691.7.108.1.41.1.1 | integer | read-write |
This enable the PTP functon. Enumeration: 'enable': 1, 'disable': 0. |
| clockModev1 | 1.3.6.1.4.1.8691.7.108.1.41.1.2 | integer | read-write |
the clock mode of the PTP clock. Enumeration: 'v2E2EBC': 4, 'v2E2E2stepTC': 1, 'v2P2PBC': 5, 'v2P2PTC': 3, 'v1BC': 0. |
| syncIntervalv1 | 1.3.6.1.4.1.8691.7.108.1.41.1.3 | integer | read-write |
the logSyncInterval of the PTP clock. Enumeration: 'sixteenSec': 4, 'eightSec': 3, 'fourSec': 2, 'oneSec': 0, 'twoSec': 1. |
| subDomainNamev1 | 1.3.6.1.4.1.8691.7.108.1.41.1.4 | integer | read-write |
The subdomain name of the PTP clock. Enumeration: 'alt3': 3, 'alt1': 1, 'dflt': 0, 'alt2': 2. |
| preferMasterv1 | 1.3.6.1.4.1.8691.7.108.1.41.1.5 | integer | read-write |
This enable the PTP prefer master function. Enumeration: 'true': 1, 'false': 0. |
| ptpv2Setting | 1.3.6.1.4.1.8691.7.108.1.41.2 | |||
| enablePtp | 1.3.6.1.4.1.8691.7.108.1.41.2.1 | integer | read-write |
This enable the PTP functon. Enumeration: 'enable': 1, 'disable': 0. |
| clockMode | 1.3.6.1.4.1.8691.7.108.1.41.2.2 | integer | read-write |
the clock mode of the PTP clock. Enumeration: 'v2E2EBC': 4, 'v2E2E2stepTC': 1, 'v2P2PBC': 5, 'v2P2PTC': 3, 'v1BC': 0. |
| transport | 1.3.6.1.4.1.8691.7.108.1.41.2.3 | integer | read-write |
the transport mode of the PTP clock. Enumeration: 'ieee802dot3': 0, 'ipv4': 1. |
| syncInterval | 1.3.6.1.4.1.8691.7.108.1.41.2.4 | integer | read-write |
the logSyncInterval of the PTP clock. Enumeration: 't2sec': 1, 't256msec': -2, 't512msec': -1, 't1sec': 0, 't128msec': -3. |
| logMinDelayReqInterval | 1.3.6.1.4.1.8691.7.108.1.41.2.5 | integer | read-write |
the logMinDelayReqInterval of the PTP clock. Enumeration: 't32sec': 5, 't4sec': 2, 't2sec': 1, 't1sec': 0, 't8sec': 3, 't16sec': 4. |
| logMinPdelayReqInterval | 1.3.6.1.4.1.8691.7.108.1.41.2.6 | integer | read-write |
the logMinPdelayReqInterval of the PTP clock. Enumeration: 't32sec': 5, 't4sec': 2, 't2sec': 1, 't1sec': 0, 't8sec': 3, 't512msec': -1, 't16sec': 4. |
| logAnnounceInterval | 1.3.6.1.4.1.8691.7.108.1.41.2.7 | integer | read-write |
the logAnnounceInterval of the PTP clock. Enumeration: 't4sec': 2, 't16sec': 4, 't2sec': 1, 't1sec': 0, 't8sec': 3. |
| announceReceiptTimeout | 1.3.6.1.4.1.8691.7.108.1.41.2.8 | integer | read-write |
the announceReceiptTimeout of the PTP clock. |
| priority1 | 1.3.6.1.4.1.8691.7.108.1.41.2.9 | integer | read-write |
the priority1 of the PTP clock. |
| priority2 | 1.3.6.1.4.1.8691.7.108.1.41.2.10 | integer | read-write |
the priority2 of the PTP clock. |
| clockClass | 1.3.6.1.4.1.8691.7.108.1.41.2.11 | integer | read-write |
the clockClass of the PTP clock. |
| domainNumber | 1.3.6.1.4.1.8691.7.108.1.41.2.12 | integer | read-write |
The domain number of the PTP clock. Enumeration: 'alt3': 3, 'alt1': 1, 'dflt': 0, 'alt2': 2. |
| localUtcOffset | 1.3.6.1.4.1.8691.7.108.1.41.2.13 | integer | read-write |
the UTC offset of the local PTP clock. |
| localUtcOffsetValid | 1.3.6.1.4.1.8691.7.108.1.41.2.14 | integer | read-write |
the UTC offset valid of the local PTP clock. Enumeration: 'true': 1, 'false': 0. |
| localLeap59 | 1.3.6.1.4.1.8691.7.108.1.41.2.15 | integer | read-write |
the leap59 of the local PTP clock. Enumeration: 'true': 1, 'false': 0. |
| localLeap61 | 1.3.6.1.4.1.8691.7.108.1.41.2.16 | integer | read-write |
the leap61 of the local PTP clock. Enumeration: 'true': 1, 'false': 0. |
| localPtpTimescale | 1.3.6.1.4.1.8691.7.108.1.41.2.17 | integer | read-write |
the timescale of the local PTP clock. Enumeration: 'arb': 0, 'ptp': 1. |
| localArbTime | 1.3.6.1.4.1.8691.7.108.1.41.2.18 | integer | read-write |
the ARB time of the local PTP clock. |
| ptpv1Status | 1.3.6.1.4.1.8691.7.108.1.41.3 | |||
| offsetToMasterv1 | 1.3.6.1.4.1.8691.7.108.1.41.3.1 | integer | read-only |
The offset to master for nsec. |
| meanPathDelayv1 | 1.3.6.1.4.1.8691.7.108.1.41.3.2 | integer | read-only |
The mean path delay of the PTP clock. |
| grandMasterUuidv1 | 1.3.6.1.4.1.8691.7.108.1.41.3.3 | macaddress | read-only |
The grand master UUID address of the PTP clock. |
| parentUuidv1 | 1.3.6.1.4.1.8691.7.108.1.41.3.4 | macaddress | read-only |
The parent master UUID address of the PTP clock. |
| clockStratumv1 | 1.3.6.1.4.1.8691.7.108.1.41.3.5 | integer | read-only |
The clock stratum of the PTP clock. |
| clockIdentifierv1 | 1.3.6.1.4.1.8691.7.108.1.41.3.6 | displaystring | read-only |
The clock identifier of the PTP clock. |
| ptpv2Status | 1.3.6.1.4.1.8691.7.108.1.41.4 | |||
| offsetToMaster | 1.3.6.1.4.1.8691.7.108.1.41.4.1 | integer | read-only |
The offset to master for nsec. |
| meanPathDelay | 1.3.6.1.4.1.8691.7.108.1.41.4.2 | integer | read-only |
The mean path delay of the PTP clock. |
| parentIdentity | 1.3.6.1.4.1.8691.7.108.1.41.4.3 | displaystring | read-only |
The parent identity of the PTP clock. |
| grandmasterIdentity | 1.3.6.1.4.1.8691.7.108.1.41.4.4 | displaystring | read-only |
The grandmaster identity of the PTP clock. |
| grandmasterClockClass | 1.3.6.1.4.1.8691.7.108.1.41.4.5 | integer | read-only |
The grandmaster clockClass of the PTP clock. |
| grandmasterClockAccuracy | 1.3.6.1.4.1.8691.7.108.1.41.4.6 | integer | read-only |
The grandmaster clockAccuracy of the PTP clock. |
| grandmasterPriority1 | 1.3.6.1.4.1.8691.7.108.1.41.4.7 | integer | read-only |
The grandmaster priority1 of the PTP clock. |
| grandmasterPriority2 | 1.3.6.1.4.1.8691.7.108.1.41.4.8 | integer | read-only |
The grandmaster priority2 of the PTP clock. |
| stepsRemoved | 1.3.6.1.4.1.8691.7.108.1.41.4.9 | integer | read-only |
The steps removed of the PTP clock. |
| currentUtcOffset | 1.3.6.1.4.1.8691.7.108.1.41.4.10 | integer | read-only |
The current utc offset of the PTP clock. |
| currentUtcOffsetValid | 1.3.6.1.4.1.8691.7.108.1.41.4.11 | displaystring | read-only |
The current utc offset valid flag of the PTP clock. |
| leap59 | 1.3.6.1.4.1.8691.7.108.1.41.4.12 | displaystring | read-only |
The leap59 of the PTP clock. |
| leap61 | 1.3.6.1.4.1.8691.7.108.1.41.4.13 | displaystring | read-only |
The leap61 of the PTP clock. |
| ptpTimescale | 1.3.6.1.4.1.8691.7.108.1.41.4.14 | displaystring | read-only |
The ptp timescale of the PTP clock. |
| timesource | 1.3.6.1.4.1.8691.7.108.1.41.4.15 | displaystring | read-only |
The timesource of the PTP clock. |
| ptpPortTable | 1.3.6.1.4.1.8691.7.108.1.41.5 | no-access |
The ptp port table. |
|
| 1.3.6.1.4.1.8691.7.108.1.41.5.1 | no-access |
The ptp port entry. |
||
| ptpPortIndex | 1.3.6.1.4.1.8691.7.108.1.41.5.1.1 | integer | read-only |
The ptp port index. |
| ptpPortEnable | 1.3.6.1.4.1.8691.7.108.1.41.5.1.2 | integer | read-write |
This enable the ptp port. Enumeration: 'enable': 1, 'disable': 0. |
| ptpPortStatus | 1.3.6.1.4.1.8691.7.108.1.41.5.1.3 | integer | read-only |
This port status of the PTP clock. Enumeration: 'ptpFaulty': 1, 'ptpSlave': 8, 'ptpPassive': 6, 'ptpUncalibrated': 7, 'ptpListening': 3, 'ptpInitializing': 0, 'ptpPreMaster': 4, 'ptpMaster': 5, 'ptpDisabled': 2. |
| diagnosis | 1.3.6.1.4.1.8691.7.108.1.42 | |||
| lldpSetting | 1.3.6.1.4.1.8691.7.108.1.42.1 | |||
| enableLLDP | 1.3.6.1.4.1.8691.7.108.1.42.1.1 | integer | read-write |
This enable the LLDP functon. Enumeration: 'enable': 1, 'disable': 0. |
| lldpMSGInterval | 1.3.6.1.4.1.8691.7.108.1.42.1.2 | integer | read-write |
The LLDP message transmit interval. |
| agingTime | 1.3.6.1.4.1.8691.7.108.1.44 | integer | read-write |
Web Timeout |
| garpSetting | 1.3.6.1.4.1.8691.7.108.1.45 | |||
| joinTime | 1.3.6.1.4.1.8691.7.108.1.45.1 | integer | read-write |
Join Time (ms). |
| leaveTime | 1.3.6.1.4.1.8691.7.108.1.45.2 | integer | read-write |
Leave Time (ms). |
| leaveAllTime | 1.3.6.1.4.1.8691.7.108.1.45.3 | integer | read-write |
Leaveall Time (ms). |
| eventlog | 1.3.6.1.4.1.8691.7.108.1.46 | |||
| eventlogTable | 1.3.6.1.4.1.8691.7.108.1.46.1 | no-access |
The table of eventlog. |
|
| 1.3.6.1.4.1.8691.7.108.1.46.1.1 | no-access |
The table entry of eventlog. |
||
| eventlogIndex | 1.3.6.1.4.1.8691.7.108.1.46.1.1.1 | integer | read-only |
The index of eventlog entry. |
| eventlogBootup | 1.3.6.1.4.1.8691.7.108.1.46.1.1.2 | integer | read-only |
The reboot count of the system. |
| eventlogDate | 1.3.6.1.4.1.8691.7.108.1.46.1.1.3 | displaystring | read-only |
The date of the event occured. |
| eventlogTime | 1.3.6.1.4.1.8691.7.108.1.46.1.1.4 | displaystring | read-only |
The time of the event occured. |
| eventlogUptime | 1.3.6.1.4.1.8691.7.108.1.46.1.1.5 | displaystring | read-only |
The time of the event occured after booting up. |
| eventlogEvent | 1.3.6.1.4.1.8691.7.108.1.46.1.1.6 | displaystring | read-only |
The event which occured in the system. |
| eventlogClear | 1.3.6.1.4.1.8691.7.108.1.46.2 | integer | read-write |
To clear the eventlog, set value 1 to this field. Enumeration: 'clear': 1, 'noop': 0. |
| industrialProtocol | 1.3.6.1.4.1.8691.7.108.1.47 | |||
| eipSetting | 1.3.6.1.4.1.8691.7.108.1.47.1 | |||
| enableEtherNetIP | 1.3.6.1.4.1.8691.7.108.1.47.1.1 | integer | read-write |
This enable the EtherNet/IP functon. Enumeration: 'enable': 1, 'disable': 0. |
| modbusSetting | 1.3.6.1.4.1.8691.7.108.1.47.2 | |||
| enableModbus | 1.3.6.1.4.1.8691.7.108.1.47.2.1 | integer | read-write |
This enable the Modbus functon. Enumeration: 'enable': 1, 'disable': 0. |
| profinetioSetting | 1.3.6.1.4.1.8691.7.108.1.47.3 | |||
| enableProfinetIO | 1.3.6.1.4.1.8691.7.108.1.47.3.1 | integer | read-write |
This enable the PROFINET IO functon. Enumeration: 'enable': 1, 'disable': 0. |
| enableFactoryDefault | 1.3.6.1.4.1.8691.7.108.1.48 | integer | read-write |
Reset all EtherDevice switch settings to factory default values Enumeration: 'activate': 1. |
| consoleLoginMode | 1.3.6.1.4.1.8691.7.108.1.51 | integer | read-write |
This option can change console login mode. Enumeration: 'men': 0, 'cli': 1. |
| accessControlList | 1.3.6.1.4.1.8691.7.108.1.52 | |||
| accessControlTable | 1.3.6.1.4.1.8691.7.108.1.52.1 | no-access |
The table of ACL rule settings. This table is used to configure ACL rules. |
|
| 1.3.6.1.4.1.8691.7.108.1.52.1.1 | no-access |
The entry information of ACL table. |
||
| aclRuleIndex | 1.3.6.1.4.1.8691.7.108.1.52.1.1.1 | integer | read-only |
The index of the ACL rule. |
| listID | 1.3.6.1.4.1.8691.7.108.1.52.1.1.2 | integer | read-only |
The listID of the ACL rule. |
| filterType | 1.3.6.1.4.1.8691.7.108.1.52.1.1.3 | integer | read-only |
The type of the ACL filter. Enumeration: 'ipBase': 0, 'macBase': 1. |
| actionFlag | 1.3.6.1.4.1.8691.7.108.1.52.1.1.4 | integer | read-only |
The action of the ACL rule. Enumeration: 'deny': 1, 'permit': 0. |
| srcMacAddr | 1.3.6.1.4.1.8691.7.108.1.52.1.1.5 | macaddress | read-only |
The source MAC address of the ACL rule. |
| srcMacMask | 1.3.6.1.4.1.8691.7.108.1.52.1.1.6 | macaddress | read-only |
The mask of the source MAC address in the ACL rule. |
| dstMacAddr | 1.3.6.1.4.1.8691.7.108.1.52.1.1.7 | macaddress | read-only |
The destination MAC address of the ACL rule. |
| dstMacMask | 1.3.6.1.4.1.8691.7.108.1.52.1.1.8 | macaddress | read-only |
The mask of the destination MAC address in the ACL rule. |
| etherType | 1.3.6.1.4.1.8691.7.108.1.52.1.1.9 | integer | read-only |
The ether type of the ACL rule. This setting will apply to both ARP and RARP traffic stream due to hardware platform design ! ! ! Because of hardware platform limitations, when Ether type ARP is selected the switch will not be able to filter packets by specific destination address ! ! ! |
| vlanID | 1.3.6.1.4.1.8691.7.108.1.52.1.1.10 | integer | read-only |
The VLAN ID of the ACL rule. |
| srcIpAddr | 1.3.6.1.4.1.8691.7.108.1.52.1.1.11 | ipaddress | read-only |
The source IP address of the ACL rule. |
| srcNetmask | 1.3.6.1.4.1.8691.7.108.1.52.1.1.12 | ipaddress | read-only |
The source IP address's mask of the ACL rule. |
| dstIpAddr | 1.3.6.1.4.1.8691.7.108.1.52.1.1.13 | ipaddress | read-only |
The destination IP address of the ACL rule |
| dstNetmask | 1.3.6.1.4.1.8691.7.108.1.52.1.1.14 | ipaddress | read-only |
The destination IP address's mask of the ACL rule. |
| protocolCode | 1.3.6.1.4.1.8691.7.108.1.52.1.1.15 | integer | read-only |
The protocol code of the ACL rule. |
| srcsocketPort | 1.3.6.1.4.1.8691.7.108.1.52.1.1.16 | integer | read-only |
The source UDP/TCP port of the ACL rule. |
| dstsocketPort | 1.3.6.1.4.1.8691.7.108.1.52.1.1.17 | integer | read-only |
The destination UDP/TCP port of the ACL rule. |
| aclStatus | 1.3.6.1.4.1.8691.7.108.1.52.1.1.18 | integer | read-only |
The status is active to indicate normal. Use createAndGo to create new on multiple SET. Use createAndWait to create new on one SET all then actvie. Use destroy to delete this row. Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4, 'createAndWait': 5. |
| aclAttachmentTable | 1.3.6.1.4.1.8691.7.108.1.52.2 | no-access |
The table of ACL attachment settings. This table is used to configure ACL attachment port and list name. |
|
| 1.3.6.1.4.1.8691.7.108.1.52.2.1 | no-access |
The entry information of ACL attachment table. |
||
| aclID | 1.3.6.1.4.1.8691.7.108.1.52.2.1.1 | integer | read-only |
The listID of the ACL attachment entry. |
| ingressPort | 1.3.6.1.4.1.8691.7.108.1.52.2.1.2 | portlist | read-only |
The ingress ports of the ACL attachment entry. |
| aclListName | 1.3.6.1.4.1.8691.7.108.1.52.2.1.4 | displaystring | read-only |
The ACL entry name. |
| cpuLoading5s | 1.3.6.1.4.1.8691.7.108.1.53 | integer | read-only |
CPU Loading for the past 5 seconds in %. |
| cpuLoading30s | 1.3.6.1.4.1.8691.7.108.1.54 | integer | read-only |
CPU Loading for the past 30 seconds in %. |
| cpuLoading300s | 1.3.6.1.4.1.8691.7.108.1.55 | integer | read-only |
CPU Loading for the past 5 minutes in %. |
| totalMemory | 1.3.6.1.4.1.8691.7.108.1.56 | integer | read-only |
Total size of System RAM. |
| freeMemory | 1.3.6.1.4.1.8691.7.108.1.57 | integer | read-only |
Total size of free dynamic memory |
| usedMemory | 1.3.6.1.4.1.8691.7.108.1.58 | integer | read-only |
Total size of used dynamic memory |
| memoryUsage | 1.3.6.1.4.1.8691.7.108.1.59 | integer | read-only |
The usage of memory size in %. |
| loopProtection | 1.3.6.1.4.1.8691.7.108.1.61 | integer | read-write |
This enable the Loop Protection functon. Enumeration: 'enable': 1, 'disable': 0. |
| eventSettings | 1.3.6.1.4.1.8691.7.108.1.62 | |||
| systemEventSettingsTable | 1.3.6.1.4.1.8691.7.108.1.62.1 | no-access |
The system event settings table. |
|
| 1.3.6.1.4.1.8691.7.108.1.62.1.1 | no-access |
System Event Settings Entry. |
||
| systemEventIndex | 1.3.6.1.4.1.8691.7.108.1.62.1.1.1 | integer | read-only |
Index of system event settings |
| systemEventActive | 1.3.6.1.4.1.8691.7.108.1.62.1.1.2 | integer | read-write |
Status of active of system event settings Enumeration: 'active': 1, 'inactive': 0. |
| systemEventName | 1.3.6.1.4.1.8691.7.108.1.62.1.1.3 | displaystring | read-only |
Name of system event settings |
| systemEventSupport | 1.3.6.1.4.1.8691.7.108.1.62.1.1.4 | integer | read-only |
Status of support modules of system event settings. Enumeration: 'support-SNMP-Trap-Email': 3, 'support-Relay1-Relay2': 24, 'support-Syslog-Relay1-Relay2': 28, 'support-Relay2-only': 16, 'support-SNMPTrap-Relay1-Relay2': 25, 'support-SNMPTrap-only': 1, 'support-Syslog-Relay2': 20, 'support-Syslog-Relay1': 12, 'support-SNMPTrap-Syslog': 5, 'support-Email-Relay2': 18, 'support-Email-Relay1': 10, 'support-all-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'support-SNMPTrap-Email-Syslog': 7, 'support-Email-Syslog-Relay2': 22, 'support-Email-Syslog-Relay1': 14, 'support-SNMPTrap-Relay2': 17, 'support-SNMPTrap-Relay1': 9, 'support-SNMPTrap-Email-Syslog-Relay2': 23, 'support-SNMPTrap-Email-Syslog-Relay1': 15, 'support-SNMPTrap-Syslog-Relay2': 21, 'support-SNMPTrap-Syslog-Relay1': 13, 'support-SNMPTrap-Email-Relay1': 11, 'support-SNMPTrap-Email-Relay2': 19, 'support-Syslog-only': 4, 'none': 0, 'support-Relay1-only': 8, 'support-Email-only': 2, 'support-Email-Syslog': 6, 'support-Email-Syslog-Relay1-Relay2': 30. |
| systemEventModuleEnable | 1.3.6.1.4.1.8691.7.108.1.62.1.1.5 | integer | read-write |
Status of enable of system event settings. Enumeration: 'enable-SNMPTrap-Relay1-Relay2': 25, 'enable-Email-Syslog-Relay1-Relay2': 30, 'enable-Syslog-Relay1-Relay2': 28, 'enable-Email-Syslog-Relay2': 22, 'enable-Email-Syslog-Relay1': 14, 'enable-SNMPTrap-Email': 3, 'enable-Relay1-only': 8, 'enable-Email-only': 2, 'enable-Syslog-Relay2': 20, 'enable-Syslog-Relay1': 12, 'enable-SNMPTrap-Syslog': 5, 'enable-Email-Syslog': 6, 'enable-SNMPTrap-Email-Relay1': 11, 'enable-SNMPTrap-Email-Relay2': 19, 'enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'enable-Email-Relay1': 10, 'enable-Email-Relay2': 18, 'enable-SNMPTrap-Syslog-Relay1': 13, 'enable-SNMPTrap-Syslog-Relay2': 21, 'enable-SNMPTrap-Email-Syslog-Relay1': 15, 'enable-SNMPTrap-Relay2': 17, 'enable-SNMPTrap-Relay1': 9, 'enable-SNMPTrap-Email-Syslog-Relay2': 23, 'none': 0, 'enable-Relay1-Relay2': 24, 'enable-Syslog-only': 4, 'enable-Relay2-only': 16, 'enable-SNMPTrap-only': 1, 'enable-SNMPTrap-Email-Syslog': 7. |
| systemEventSeverity | 1.3.6.1.4.1.8691.7.108.1.62.1.1.6 | integer | read-write |
Severity of system event settings Enumeration: 'information': 6, 'notice': 5, 'emergency': 0, 'alert': 1, 'critical': 2, 'error': 3, 'debug': 7, 'warning': 4. |
| portEventSettingsTable | 1.3.6.1.4.1.8691.7.108.1.62.2 | no-access |
The port event settings table. |
|
| 1.3.6.1.4.1.8691.7.108.1.62.2.1 | no-access |
Port Event Settings Entry. |
||
| portEventIndex | 1.3.6.1.4.1.8691.7.108.1.62.2.1.1 | integer | read-only |
Index of port event settings |
| portEventLabel | 1.3.6.1.4.1.8691.7.108.1.62.2.1.2 | displaystring | read-only |
Label of portEventIndex |
| portEventActive | 1.3.6.1.4.1.8691.7.108.1.62.2.1.3 | integer | read-write |
Status of active of port event settings Enumeration: 'active': 1, 'inactive': 0. |
| portEventEnable | 1.3.6.1.4.1.8691.7.108.1.62.2.1.4 | integer | read-write |
Status of event enable of port event settings Enumeration: 'none': 0, 'enable-LinkOn-LinkOff': 3, 'enable-LinkOn-only': 1, 'enable-LinkOff-TrafficOverload': 6, 'enable-All-LinkOn-LinkOff-TrafficOverload': 7, 'enable-LinkOn-TrafficOverload': 5, 'enable-TrafficOverload-only': 4, 'enable-LinkOff-only': 2. |
| portEventTrafficThreshold | 1.3.6.1.4.1.8691.7.108.1.62.2.1.5 | integer | read-write |
Threshold of Traffic-Overload in percentage(%) |
| portEventTrafficDuration | 1.3.6.1.4.1.8691.7.108.1.62.2.1.6 | integer | read-write |
Duration of Traffic-Overload in secs(s) |
| portEventModuleEnable | 1.3.6.1.4.1.8691.7.108.1.62.2.1.7 | integer | read-write |
Status of module enable of port event settings. Enumeration: 'enable-SNMPTrap-Relay1-Relay2': 25, 'enable-Email-Syslog-Relay1-Relay2': 30, 'enable-Syslog-Relay1-Relay2': 28, 'enable-Email-Syslog-Relay2': 22, 'enable-Email-Syslog-Relay1': 14, 'enable-SNMPTrap-Email': 3, 'enable-Relay1-only': 8, 'enable-Email-only': 2, 'enable-Syslog-Relay2': 20, 'enable-Syslog-Relay1': 12, 'enable-SNMPTrap-Syslog': 5, 'enable-Email-Syslog': 6, 'enable-SNMPTrap-Email-Relay1': 11, 'enable-SNMPTrap-Email-Relay2': 19, 'enable-All-SNMPTrap-Email-Syslog-Relay1-Relay2': 31, 'enable-Email-Relay1': 10, 'enable-Email-Relay2': 18, 'enable-SNMPTrap-Syslog-Relay1': 13, 'enable-SNMPTrap-Syslog-Relay2': 21, 'enable-SNMPTrap-Email-Syslog-Relay1': 15, 'enable-SNMPTrap-Relay2': 17, 'enable-SNMPTrap-Relay1': 9, 'enable-SNMPTrap-Email-Syslog-Relay2': 23, 'none': 0, 'enable-Relay1-Relay2': 24, 'enable-Syslog-only': 4, 'enable-Relay2-only': 16, 'enable-SNMPTrap-only': 1, 'enable-SNMPTrap-Email-Syslog': 7. |
| portEventSeverity | 1.3.6.1.4.1.8691.7.108.1.62.2.1.8 | integer | read-write |
Severity of port event settings Enumeration: 'information': 6, 'notice': 5, 'emergency': 0, 'alert': 1, 'critical': 2, 'error': 3, 'debug': 7, 'warning': 4. |
| managementInterface | 1.3.6.1.4.1.8691.7.108.1.63 | |||
| httpEnable | 1.3.6.1.4.1.8691.7.108.1.63.1 | integer | read-write |
Status of http service Enumeration: 'enable': 1, 'disable': 0. |
| httpPort | 1.3.6.1.4.1.8691.7.108.1.63.2 | integer | read-write |
Port of http service |
| sslEnable | 1.3.6.1.4.1.8691.7.108.1.63.3 | integer | read-write |
Status of ssl(https) service Enumeration: 'enable': 1, 'disable': 0. |
| sslPort | 1.3.6.1.4.1.8691.7.108.1.63.4 | integer | read-write |
Port of ssl(https) service |
| telnetEnable | 1.3.6.1.4.1.8691.7.108.1.63.5 | integer | read-write |
Status of telnet service Enumeration: 'enable': 1, 'disable': 0. |
| telnetPort | 1.3.6.1.4.1.8691.7.108.1.63.6 | integer | read-write |
Port of telnet service |
| sshEnable | 1.3.6.1.4.1.8691.7.108.1.63.7 | integer | read-write |
Status of ssh service Enumeration: 'enable': 1, 'disable': 0. |
| sshPort | 1.3.6.1.4.1.8691.7.108.1.63.8 | integer | read-write |
Port of telnet service |
| mgmtInterfaceAutoLogout | 1.3.6.1.4.1.8691.7.108.1.63.9 | integer | read-write |
Web Timeout (Mins). Set 0 to disable |
| snmpdEnable | 1.3.6.1.4.1.8691.7.108.1.63.10 | integer | read-write |
Status of snmp agent Enumeration: 'enable': 1, 'disable': 0. |
| snmpdPort | 1.3.6.1.4.1.8691.7.108.1.63.11 | integer | read-only |
Port of snmp agent |
| moxaUtilityServiceEnable | 1.3.6.1.4.1.8691.7.108.1.63.12 | integer | read-write |
Status of moxa utility service Enumeration: 'enable': 1, 'disable': 0. |
| moxaUtilityServicePort | 1.3.6.1.4.1.8691.7.108.1.63.13 | integer | read-only |
Port of moxa utility service |
| httpMaxLoginUsers | 1.3.6.1.4.1.8691.7.108.1.63.14 | integer | read-write |
Configure HTTP/HTTPS maximum login users |
| telnetMaxLoginUsers | 1.3.6.1.4.1.8691.7.108.1.63.15 | integer | read-write |
Configure TELNET/SSH maximum login users |
| moxaNewCmdEnable | 1.3.6.1.4.1.8691.7.108.1.63.16 | integer | read-write |
Status of new moxa utility service Enumeration: 'enable': 1, 'disable': 0. |
| switchLocator | 1.3.6.1.4.1.8691.7.108.1.64 | |||
| blinkingLocatorLED | 1.3.6.1.4.1.8691.7.108.1.64.1 | integer | read-write |
Blinking switch locator LED. Enumeration: 'on': 1, 'off': 0. |
| disableLocatorLEDTime | 1.3.6.1.4.1.8691.7.108.1.64.2 | integer | read-write |
Configure back-off time for disable switch locator LED. |
| uiVersion | 1.3.6.1.4.1.8691.7.108.1.65 | integer | read-only |
New UI Version |
| supportIfXTable | 1.3.6.1.4.1.8691.7.108.1.69 | integer | read-only |
Support 64 bit Counter (ifXTable). Enumeration: 'yes': 1, 'no': 0. |
| passwordPolicy | 1.3.6.1.4.1.8691.7.108.1.70 | |||
| pwdMinLength | 1.3.6.1.4.1.8691.7.108.1.70.1 | integer | read-write |
Configure the minimum password length. |
| pwdComplexityCheckEnable | 1.3.6.1.4.1.8691.7.108.1.70.2 | integer | read-write |
Enable password complexity check. Enumeration: 'enable': 1, 'disable': 0. |
| pwdComplexityCheckDigitEnable | 1.3.6.1.4.1.8691.7.108.1.70.3 | integer | read-write |
Add password complexity check with digit. Enumeration: 'enable': 1, 'disable': 0. |
| pwdComplexityCheckAlphabetEnable | 1.3.6.1.4.1.8691.7.108.1.70.4 | integer | read-write |
Add password complexity check with alphabet. Enumeration: 'enable': 1, 'disable': 0. |
| pwdComplexityCheckSpecialCharEnable | 1.3.6.1.4.1.8691.7.108.1.70.5 | integer | read-write |
Add password complexity check with special-characters. Enumeration: 'enable': 1, 'disable': 0. |
| loginLockout | 1.3.6.1.4.1.8691.7.108.1.71 | |||
| loginFailureLockoutEnable | 1.3.6.1.4.1.8691.7.108.1.71.1 | integer | read-write |
Enable login failure lockout. Enumeration: 'enable': 1, 'disable': 0. |
| loginFailureLockoutRetrys | 1.3.6.1.4.1.8691.7.108.1.71.2 | integer | read-write |
Configure login failure lockout retry threshhold. |
| loginFailureLockoutTime | 1.3.6.1.4.1.8691.7.108.1.71.3 | integer | read-write |
Configure login failure lockout time.(Min) |
| systemNotifyMessage | 1.3.6.1.4.1.8691.7.108.1.72 | |||
| httpLoginMessage | 1.3.6.1.4.1.8691.7.108.1.72.1 | displaystring | read-write |
Configure HTTP/HTTPS login message. |
| httpLoginFailureMessage | 1.3.6.1.4.1.8691.7.108.1.72.2 | displaystring | read-write |
Configure HTTP/HTTPS login failure message. |
| syslogManagement | 1.3.6.1.4.1.8691.7.108.1.73 | |||
| loggingCapacityThreshold | 1.3.6.1.4.1.8691.7.108.1.73.1 | integer | read-write |
Configure event log capacity warning threshold. |
| loggingCapacityTrapWarningEnable | 1.3.6.1.4.1.8691.7.108.1.73.2 | integer | read-write |
Enable event log capacity SNMP trap warning. Enumeration: 'enable': 1, 'disable': 0. |
| loggingCapacityEmailWarningEnable | 1.3.6.1.4.1.8691.7.108.1.73.3 | integer | read-write |
Enable event log capacity email warning. Enumeration: 'enable': 1, 'disable': 0. |
| loggingOversizeAction | 1.3.6.1.4.1.8691.7.108.1.73.4 | integer | read-write |
Set event log over-size action. Enumeration: 'stoprecord': 1, 'overwrite': 0. |
| certificateManagement | 1.3.6.1.4.1.8691.7.108.1.74 | |||
| sslCertGen | 1.3.6.1.4.1.8691.7.108.1.74.1 | integer | read-write |
Generate SSL certificate. Enumeration: 'na': 0, 'generate': 1. |
| sshKeyGen | 1.3.6.1.4.1.8691.7.108.1.74.2 | integer | read-write |
Generate SSH host key. Enumeration: 'na': 0, 'generate': 1. |
| ivlSwitch | 1.3.6.1.4.1.8691.7.108.1.76 | integer | read-only |
Current switch runs IVL(Independent Vlan Learning) or SVL(Shared Vlan Learning) Enumeration: 'ivl': 1, 'svl': 0. |
| supportMacSticky | 1.3.6.1.4.1.8691.7.108.1.77 | integer | read-only |
Support MAC Sticky feature or not. Enumeration: 'not-support': 0, 'support': 1. |
| serialNumber | 1.3.6.1.4.1.8691.7.108.1.78 | displaystring | read-only |
Serial Number |
| configEncryptEnable | 1.3.6.1.4.1.8691.7.108.1.79 | integer | read-only |
Configuration File Encryption Setting. Enumeration: 'enable': 1, 'disable': 0. |
| swTraps | 1.3.6.1.4.1.8691.7.108.2 | |||
| varconfigChangeTrap | 1.3.6.1.4.1.8691.7.108.2.1 | integer | read-only |
The configuration has been changed. Enumeration: 'none': 1, 'configChanged': 2. |
| varpower1Trap | 1.3.6.1.4.1.8691.7.108.2.2 | integer | read-only |
The power on/off changed. Enumeration: 'none': 1, 'on2off': 2, 'off2on': 3. |
| varpower2Trap | 1.3.6.1.4.1.8691.7.108.2.3 | integer | read-only |
The power on/off changed. Enumeration: 'none': 1, 'on2off': 2, 'off2on': 3. |
| vartrafficOverloadTrap | 1.3.6.1.4.1.8691.7.108.2.4 | integer | read-only |
The ethernet port's traffic loading exceeds the pre-defined value. |
| varredundancyTopologyChangedTrap | 1.3.6.1.4.1.8691.7.108.2.5 | integer | read-only |
The redundancy topology has been changed. Enumeration: 'topologyChangedTurboChainHead': 3, 'none': 1, 'topologyChanged': 2, 'topologyChangedTurboChainTail': 4. |
| varturboRingCouplingPortChangedTrap | 1.3.6.1.4.1.8691.7.108.2.6 | integer | read-only |
The coupling path of Turbo Ring has been changed. Enumeration: 'none': 1, 'couplingPortChanged': 2. |
| varturboRingMasterChangedTrap | 1.3.6.1.4.1.8691.7.108.2.7 | integer | read-only |
The master of Turbo Ring has been changed. Enumeration: 'none': 1, 'ringMasterChanged': 2. |
| varPoEWarningTrap | 1.3.6.1.4.1.8691.7.108.2.16 | integer | read-only |
The POE warning message. Enumeration: 'pseOverTemperature': 7, 'pdPowerOn': 3, 'exceedSystemThreshold': 5, 'pdOverCurrent': 1, 'exceedSystemPowerBudget': 9, 'pdCheckFail': 2, 'pdPowerOff': 4, 'pseFetBad': 6, 'pseVeeUvlo': 8. |
| varPortLoopDetectedTrap | 1.3.6.1.4.1.8691.7.108.2.17 | integer | read-only |
The DUT port is looping. |
| varRateLimitedOnTrap | 1.3.6.1.4.1.8691.7.108.2.18 | integer | read-only |
The DUT port is rate limit. Enumeration: 'none': 1, 'rateLimitOFF': 3, 'rateLimitON': 2. |
| varLLDPChgTrap | 1.3.6.1.4.1.8691.7.108.2.19 | integer | read-only |
The LLDP table is changing. |
| varABC02WarningTrap | 1.3.6.1.4.1.8691.7.108.2.20 | integer | read-only |
Warning trap while specific error is occured in abc02. Enumeration: 'nnauthorizedMediaIsDetected': 2, 'autoImportConfigurationFail': 5, 'noEnoughSpace': 1, 'exportLogFail': 4, 'exportConfigurationFail': 3. |
| varturboRingMasterMismatchTrap | 1.3.6.1.4.1.8691.7.108.2.22 | integer | read-only |
The master of Turbo Ring has been mismatch. Enumeration: 'none': 1, 'ringMasterMismatch': 2. |
| varUserAuthSuccessTrap | 1.3.6.1.4.1.8691.7.108.2.24 | octet string | read-only |
Account authentication success. |
| varUserAuthFailTrap | 1.3.6.1.4.1.8691.7.108.2.25 | octet string | read-only |
Account authentication failed. |
| varMacStickyPortViolationPortDisableTrap | 1.3.6.1.4.1.8691.7.108.2.26 | integer | read-only |
The number of sticky Mac address on the port was over the limit. A macStickyPortViolationPortDisableTrap will contain 3 elements: port, macaddr, and vlanid. Enumeration: 'none': 1, 'violationPortDisable': 2. |
| varFiberWarningTrap | 1.3.6.1.4.1.8691.7.108.2.28 | integer | read-only |
Warning trap while fiber is over threshold. |
| varLoggingCapacityTrap | 1.3.6.1.4.1.8691.7.108.2.29 | integer | read-only |
Warning trap while event log is over capacity threshold. |
| varUserInfoChgTrap | 1.3.6.1.4.1.8691.7.108.2.31 | octet string | read-only |
Account information has been changed. |
| varConfigImportTrap | 1.3.6.1.4.1.8691.7.108.2.32 | integer | read-only |
Configuration has been imported. |
| varRemoteAuthSuccessTrap | 1.3.6.1.4.1.8691.7.108.2.38 | integer | read-only |
The login authentication is successful by the remote server Enumeration: 'tacacs': 1, 'radius': 2. |
| varRemoteAuthFailTrap | 1.3.6.1.4.1.8691.7.108.2.39 | integer | read-only |
The login authentication is failed by the remote server Enumeration: 'tacacs': 1, 'radius': 2. |