MOBANetClocksV2-MIB: View SNMP OID List / Download MIB

VENDOR: MOSER-BAER AG


 Home MIB: MOBANetClocksV2-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mobatime 1.3.6.1.4.1.13842
             mobaNetClocks 1.3.6.1.4.1.13842.6
                 mobaNetClocksV2 1.3.6.1.4.1.13842.6.2
                     mbnscNet 1.3.6.1.4.1.13842.6.2.1
                         mbnscNetGen 1.3.6.1.4.1.13842.6.2.1.1
                             mbnscNetGenMAC 1.3.6.1.4.1.13842.6.2.1.1.1 octet string read-only
MAC-Address (xx xx xx xx xx xx)
                             mbnscNetGenIPMode 1.3.6.1.4.1.13842.6.2.1.1.2 integer read-write
IP Mode: 0: IPv4 and IPv6 1: IPv4 only 2: IPv6 only Enumeration: 'both': 0, 'ipv6only': 2, 'ipv4only': 1.
                             mbnscNetGenIPNameserver 1.3.6.1.4.1.13842.6.2.1.1.3 displaystring read-write
IPv4 or IPv6 address (xxx.xxx.xxx.xxx or xxxx::xxxx:xxxx) of the nameserver
                             mbnscNetGenTZClientPort 1.3.6.1.4.1.13842.6.2.1.1.4 unsigned32 read-write
Timezone client port. Default 65534
                             mbnscNetGenConfigPort 1.3.6.1.4.1.13842.6.2.1.1.5 unsigned32 read-write
Configuration port. Default 65532
                             mbnscNetGenSnmpMode 1.3.6.1.4.1.13842.6.2.1.1.6 unsigned32 read-only
SNMP mode disabled 0: SNMP enabled (default) 1: SNMP disabled
                             mbnscNetGenMulticastMode 1.3.6.1.4.1.13842.6.2.1.1.7 unsigned32 read-write
Multicast mode disabled 0: Multicast enabled (default) 1: Multicast disabled
                             mbnscNetGenHostname 1.3.6.1.4.1.13842.6.2.1.1.8 displaystring read-write
Host name of the device
                             mbnscNetGenCommMode 1.3.6.1.4.1.13842.6.2.1.1.9 unsigned32 read-only
Communication / synchronisation mode 0=unicast 1=multicast (only for digital clocks)
                             mbnscNetGenMCastGrpIP 1.3.6.1.4.1.13842.6.2.1.1.10 ipaddress read-write
IP network address (xxx.xxx.xxx.xxx) of the multicast group IP e.g. 239.192.54.1 (only for digital clocks)
                             mbnscNetGenConfigCmd 1.3.6.1.4.1.13842.6.2.1.1.100 unsigned32 read-write
Network configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                             mbnscNetGenConfigChangedTime 1.3.6.1.4.1.13842.6.2.1.1.101 timeticks read-only
Time of the last configuration change.
                         mbnscNetIPv4 1.3.6.1.4.1.13842.6.2.1.2
                             mbnscNetIPv4Addr 1.3.6.1.4.1.13842.6.2.1.2.1 ipaddress read-write
IP network address (xxx.xxx.xxx.xxx) of the network slave clock
                             mbnscNetIPv4Mask 1.3.6.1.4.1.13842.6.2.1.2.2 ipaddress read-write
IP subnet mask (xxx.xxx.xxx.xxx)
                             mbnscNetIPv4Gateway 1.3.6.1.4.1.13842.6.2.1.2.3 ipaddress read-write
IP network address (xxx.xxx.xxx.xxx) for the gateway
                             mbnscNetIPv4DHCPMode 1.3.6.1.4.1.13842.6.2.1.2.4 unsigned32 read-write
DHCP mode 0: DHCP disabled 1: DHCP enabled (default)
                             mbnscNetIPv4ConfigCmd 1.3.6.1.4.1.13842.6.2.1.2.100 unsigned32 read-write
Network configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                             mbnscNetIPv4ConfigChangedTime 1.3.6.1.4.1.13842.6.2.1.2.101 timeticks read-only
Time of the last configuration change.
                         mbnscNetIPv6 1.3.6.1.4.1.13842.6.2.1.3
                             mbnscNetIPv6AddrLocal 1.3.6.1.4.1.13842.6.2.1.3.1 displaystring read-only
IP V6 link local network address (xxxx:xxxx::xxxx)
                             mbnscNetIPv6AddrAuto 1.3.6.1.4.1.13842.6.2.1.3.2 displaystring read-only
IP V6 network address by autoconfig (xxxx:xxxx::xxxx)
                             mbnscNetIPv6AddrDHCP 1.3.6.1.4.1.13842.6.2.1.3.3 displaystring read-only
IP V6 network address by DHCPv6 (xxxx:xxxx::xxxx)
                             mbnscNetIPv6AddrFix 1.3.6.1.4.1.13842.6.2.1.3.4 mobanetworkname read-write
IP V6 network address manual set (xxxx:xxxx::xxxx)
                             mbnscNetIPv6Prefix 1.3.6.1.4.1.13842.6.2.1.3.5 unsigned32 read-write
IPv6 subnet prefix for manual set IP address
                             mbnscNetIPv6Gateway 1.3.6.1.4.1.13842.6.2.1.3.6 displaystring read-only
IP V6 network address of gateway (next hop) (xxxx:xxxx::xxxx)
                             mbnscNetIPv6Config 1.3.6.1.4.1.13842.6.2.1.3.7 integer read-write
Mode of IPv6 adress configuration 0: auto and fixed 1: autoconfig only 2: DHCPv6 only 3: none Enumeration: 'both': 0, 'none': 3, 'autoonly': 1, 'dhcpv6only': 2.
                             mbnscNetIPv6ConfigCmd 1.3.6.1.4.1.13842.6.2.1.3.100 unsigned32 read-write
Network configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                             mbnscNetIPv6ConfigChangedTime 1.3.6.1.4.1.13842.6.2.1.3.101 timeticks read-only
Time of the last configuration change.
                     mbnscTime 1.3.6.1.4.1.13842.6.2.2
                         mbnscTimeNTP1 1.3.6.1.4.1.13842.6.2.2.1 displaystring read-write
String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.
                         mbnscTimeNTP2 1.3.6.1.4.1.13842.6.2.2.2 displaystring read-write
String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.
                         mbnscTimeNTP3 1.3.6.1.4.1.13842.6.2.2.3 displaystring read-write
String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.
                         mbnscTimeNTP4 1.3.6.1.4.1.13842.6.2.2.4 displaystring read-write
String with IPv4 or IPv6 address (192.168.3.4 or FD03:2345:2345:2345::231) or DNS name to get NTP time information.
                         mbnscTimeNTPcurrent 1.3.6.1.4.1.13842.6.2.2.5 displaystring read-only
IPv4 or IPv6 address of current NTP server
                         mbnscTimeNTPpollIntervall 1.3.6.1.4.1.13842.6.2.2.6 unsigned32 read-write
NTP request intervall 10..999sec
                         mbnscTimeDeviceTime 1.3.6.1.4.1.13842.6.2.2.7 unsigned32 read-only
Actual device time (UTC). Seconds since 1.1.1970 00:00:00
                         mbnscTimeLocOffset 1.3.6.1.4.1.13842.6.2.2.8 integer32 read-only
Offset to localt time in minutes (-720..720)
                         mbnscTimeLastReception 1.3.6.1.4.1.13842.6.2.2.9 unsigned32 read-only
Last received time (UTC). Seconds since 1.1.1970 00:00:00
                         mbnscTimeConfigCmd 1.3.6.1.4.1.13842.6.2.2.100 unsigned32 read-write
Time configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                         mbnscTimeConfigChangedTime 1.3.6.1.4.1.13842.6.2.2.101 timeticks read-only
Time of the last configuration change.
                     mbnscTimeZone 1.3.6.1.4.1.13842.6.2.3
                         mbnscTimeZoneVersion 1.3.6.1.4.1.13842.6.2.3.1 integer32 read-only
Actual version internal time zone table
                         mbnscTimeZoneNumber 1.3.6.1.4.1.13842.6.2.3.2 integer32 read-write
Time zone 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 254: automatic time zone - e.g. UTC 255: internal user defined time zone (SET only used for digital clocks)
                         mbnscTimeZoneEntry1 1.3.6.1.4.1.13842.6.2.3.3 octet string read-only
Time Zone entry -> see special definition
                         mbnscTimeZoneEntry2 1.3.6.1.4.1.13842.6.2.3.4 octet string read-only
Time Zone entry -> see special definition
                         mbnscTimeZoneEntry3 1.3.6.1.4.1.13842.6.2.3.5 octet string read-only
Time Zone entry -> see special definition
                         mbnscTimeZoneEntry4 1.3.6.1.4.1.13842.6.2.3.6 octet string read-only
Time Zone entry -> see special definition
                         mbnscTimeZoneEntry5 1.3.6.1.4.1.13842.6.2.3.7 octet string read-only
Time Zone entry -> see special definition
                         mbnscTimeZoneEntry6 1.3.6.1.4.1.13842.6.2.3.8 octet string read-only
Time Zone entry -> see special definition
                         mbnscTimeZoneEntry7 1.3.6.1.4.1.13842.6.2.3.9 octet string read-only
Time Zone entry -> see special definition
                         mbnscTimeZoneConfigCmd 1.3.6.1.4.1.13842.6.2.3.100 unsigned32 read-write
Time zone configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                         mbnscTimeZoneConfigChangedTime 1.3.6.1.4.1.13842.6.2.3.101 timeticks read-only
Time of the last configuration change.
                     mbnscMode 1.3.6.1.4.1.13842.6.2.4
                         mbnscModeSwitchInfo 1.3.6.1.4.1.13842.6.2.4.1 integer32 read-only
Current switch settings (only analogue movements)
                         mbnscModeDisplayBrightness 1.3.6.1.4.1.13842.6.2.4.2 displaystring read-write
Display brightness for digital clocks 1..30, A (Auto)
                         mbnscModeDisplayFormat 1.3.6.1.4.1.13842.6.2.4.3 displaystring read-write
Display format 12h/24h for digital clocks
                         mbnscModeDisplayAlternate 1.3.6.1.4.1.13842.6.2.4.4 displaystring read-write
Display alternating mode for digital clocks 1: time continuously 2: date cont. 3: temperature cont. (sequence 6 sec. time, 3 sec. date for ECO-DC) 4: stopwatch cont. (only DC clock) 5: sequence 6 sec. time, 3 sec. date (only DC clock) 6: sequence 8 sec. time, 3 sec. date, 3 sec. temperature (only DC clock)
                         mbnscModeNTP 1.3.6.1.4.1.13842.6.2.4.5 displaystring no-access
NTP synchronisation mode for digital clocks
                         mbnscModeIRlock 1.3.6.1.4.1.13842.6.2.4.6 displaystring read-write
IR autolock time for digital clocks (only DC clock) 1..60, U (autolock off)
                         mbnscModeTimeDispZeros 1.3.6.1.4.1.13842.6.2.4.7 displaystring read-write
Leading zeros time display for digital clocks (only DC clock) 1: time with leading zero 2: time without leading zero
                         mbnscModeDateDispZeros 1.3.6.1.4.1.13842.6.2.4.8 displaystring read-write
Leading zeros date display for digital clocks (only DC clock) 1: date with leading zero 2: date without leading zero
                         mbnscModeTempUnit 1.3.6.1.4.1.13842.6.2.4.9 displaystring read-write
Temperature unit for digital clocks (only DC clock) C: Celsius F: Fahrenheit
                         mbnscModeClockOpMode 1.3.6.1.4.1.13842.6.2.4.10 displaystring read-write
Operation mode for digital clocks (only DC clock) 0: normal mode 1: special mode 1 2: special mode 2
                         mbnscModeNWParam 1.3.6.1.4.1.13842.6.2.4.11 displaystring no-access
Network parameter setting mode for digital clocks
                         mbnscModeDispDerating 1.3.6.1.4.1.13842.6.2.4.12 displaystring read-write
Display current deration setting for digital clocks (see service menu definition)
                         mbnscModeLightCorr 1.3.6.1.4.1.13842.6.2.4.13 displaystring read-write
Light measurement correction for digital clocks (see service menu definition)
                         mbnscAdditionalDigitalClockModes 1.3.6.1.4.1.13842.6.2.4.30
                               mbnscSensors 1.3.6.1.4.1.13842.6.2.4.30.1
                                   mbnscSensorsTempActivation 1.3.6.1.4.1.13842.6.2.4.30.1.1 displaystring read-write
Temperature sensor activation 1: DS18B20 3: TME (only sensor 1) 4: TME (Sensors 1 and 2)
                                   mbnscSensorsTemp1IPAddr 1.3.6.1.4.1.13842.6.2.4.30.1.2 ipaddress read-write
IP network address (xxx.xxx.xxx.xxx) of the sensor 1 (SET only used for digital clocks)
                                   mbnscSensorsTemp2IPAddr 1.3.6.1.4.1.13842.6.2.4.30.1.3 ipaddress read-write
IP network address (xxx.xxx.xxx.xxx) of the sensor 2 (SET only used for digital clocks)
                                   mbnscSensorsConfigCmd 1.3.6.1.4.1.13842.6.2.4.30.1.100 unsigned32 read-write
Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                                   mbnscSensorsConfigChangedTime 1.3.6.1.4.1.13842.6.2.4.30.1.101 timeticks read-only
Time of the last configuration change.
                               mbnscDA 1.3.6.1.4.1.13842.6.2.4.30.2
                                   mbnscDASecondCircleDisplay 1.3.6.1.4.1.13842.6.2.4.30.2.1 displaystring read-write
The second circle display mode 1: Accumulating ring of seconds marker 2: Take actual second from full shining circle step by step 3: Full shining circle, actual second off 4: Three shining seconds, the first is showing actual second 5: Two shining seconds, the first is showing actual second
                                   mbnscDAConfigCmd 1.3.6.1.4.1.13842.6.2.4.30.2.100 unsigned32 read-write
Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                                   mbnscDAConfigChangedTime 1.3.6.1.4.1.13842.6.2.4.30.2.101 timeticks read-only
Time of the last configuration change.
                               mbnscDK 1.3.6.1.4.1.13842.6.2.4.30.3
                                   mbnscDKFirstLanguage 1.3.6.1.4.1.13842.6.2.4.30.3.1 displaystring read-write
First language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)
                                   mbnscDKSecondLanguage 1.3.6.1.4.1.13842.6.2.4.30.3.2 displaystring read-write
Second language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)
                                   mbnscDKThirdLanguage 1.3.6.1.4.1.13842.6.2.4.30.3.3 displaystring read-write
Third language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)
                                   mbnscDKTempUnitSecondLang 1.3.6.1.4.1.13842.6.2.4.30.3.4 displaystring read-write
Temperature units for second selected language C: Celsius F: Fahrenheit
                                   mbnscDKTempUnitThirdLang 1.3.6.1.4.1.13842.6.2.4.30.3.5 displaystring read-write
Temperature units for third selected language C: Celsius F: Fahrenheit
                                   mbnscDKAutoLangSwitchOver 1.3.6.1.4.1.13842.6.2.4.30.3.6 displaystring read-write
Language switch mode for automatic language switching over in one display alternating cycle A: all languages S: simple language
                                   mbnscDKNumOfCharsForWeekday 1.3.6.1.4.1.13842.6.2.4.30.3.7 displaystring read-write
Number of characters used for weekday names 2: two characters 3: three characters
                                   mbnscDKNamesFormatDisplay 1.3.6.1.4.1.13842.6.2.4.30.3.8 displaystring read-write
Weekday and month display format 1: first capital 2: all capitals
                                   mbnscDKTemp1DescriptEnable 1.3.6.1.4.1.13842.6.2.4.30.3.9 displaystring read-write
Display of description for first measured temperature N/Y
                                   mbnscDKTemp1Description 1.3.6.1.4.1.13842.6.2.4.30.3.10 displaystring read-write
Description text for first measured temperature
                                   mbnscDKTemp2DescriptEnable 1.3.6.1.4.1.13842.6.2.4.30.3.11 displaystring read-write
Display of description for second measured temperature N/Y
                                   mbnscDKTemp2Description 1.3.6.1.4.1.13842.6.2.4.30.3.12 displaystring read-write
Description text for second measured temperature
                                   mbnscDKWorldTimeZone1 1.3.6.1.4.1.13842.6.2.4.30.3.13 integer32 read-write
Index of time zone for world time zone 1 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
                                   mbnscDKWorldTimeZone1Description 1.3.6.1.4.1.13842.6.2.4.30.3.14 displaystring read-write
Description text for World time zone 1
                                   mbnscDKWorldTimeZone2 1.3.6.1.4.1.13842.6.2.4.30.3.15 integer32 read-write
Index of time zone for world time zone 2 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
                                   mbnscDKWorldTimeZone2Description 1.3.6.1.4.1.13842.6.2.4.30.3.16 displaystring read-write
Description text for World time zone 2
                                   mbnscDKWorldTimeZone3 1.3.6.1.4.1.13842.6.2.4.30.3.17 integer32 read-write
Index of time zone for world time zone 3 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
                                   mbnscDKWorldTimeZone3Description 1.3.6.1.4.1.13842.6.2.4.30.3.18 displaystring read-write
Description text for World time zone 3
                                   mbnscDKWorldTimeZone4 1.3.6.1.4.1.13842.6.2.4.30.3.19 integer32 read-write
Index of time zone for world time zone 4 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
                                   mbnscDKWorldTimeZone4Description 1.3.6.1.4.1.13842.6.2.4.30.3.20 displaystring read-write
Description text for World time zone 4
                                   mbnscDKWorldTimeZone5 1.3.6.1.4.1.13842.6.2.4.30.3.21 integer32 read-write
Index of time zone for world time zone 5 0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
                                   mbnscDKWorldTimeZone5Description 1.3.6.1.4.1.13842.6.2.4.30.3.22 displaystring read-write
Description text for World time zone 5
                                   mbnscDKAutoTimeZoneSwitchOver 1.3.6.1.4.1.13842.6.2.4.30.3.23 displaystring read-write
World time switch mode for automatic time zone switching over in one display alternating cycle A: all world time zones S: simple world time zone
                                   mbnscDKConfigCmd 1.3.6.1.4.1.13842.6.2.4.30.3.100 unsigned32 read-write
Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                                   mbnscDKConfigChangedTime 1.3.6.1.4.1.13842.6.2.4.30.3.101 timeticks read-only
Time of the last configuration change.
                         mbnscAdditionalInterfaceModes 1.3.6.1.4.1.13842.6.2.4.40
                               mbnscNMI 1.3.6.1.4.1.13842.6.2.4.40.1
                                   mbnscNMIDCFCurrentLoop 1.3.6.1.4.1.13842.6.2.4.40.1.1 integer read-write
Operation mode of the DCF77 current loop. 0: OFF 1: ON Enumeration: 'on': 1, 'off': 0.
                                   mbnscNMILineDriver 1.3.6.1.4.1.13842.6.2.4.40.1.2 integer read-write
Operation mode of the line driver. 0: OFF 1: MOBALine 2: Active DCF Enumeration: 'activdcf': 2, 'off': 0, 'mobaline': 1.
                                   mbnscNMIMOBALineMode 1.3.6.1.4.1.13842.6.2.4.40.1.3 integer read-write
Operation mode of MOBALine. 0: normal operation 1: 12:00 mode, sideclocks shows 12:00 position 2: clock-id mode, sideclocks shows their ids if configured Enumeration: 'command12h': 1, 'clockidcommand': 2, 'normal': 0.
                                   mbnscNMIMOBALineMinuteHandMode 1.3.6.1.4.1.13842.6.2.4.40.1.4 integer read-write
Minute hand mode operation of MOBALine. 0: minute step mode 1: half minute step mode 2: continuous mode Enumeration: 'continuous': 2, 'halfminutestep': 1, 'minutestep': 0.
                                   mbnscNMIActiveDCFMode 1.3.6.1.4.1.13842.6.2.4.40.1.5 integer read-write
Operation mode of Active DCF. 1: Mode 1 2: Mode 2 3: Mode 3 4: Mode 4 5: Mode 5 6: Mode 6 Enumeration: 'mode6': 6, 'mode4': 4, 'mode5': 5, 'mode2': 2, 'mode3': 3, 'mode1': 1.
                                   mbnscNMISideClockState 1.3.6.1.4.1.13842.6.2.4.40.1.20
                                         mbnscNMISideClock1 1.3.6.1.4.1.13842.6.2.4.40.1.20.1 integer read-only
State of side clock 1 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                         mbnscNMISideClock2 1.3.6.1.4.1.13842.6.2.4.40.1.20.2 integer read-only
State of side clock 2 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                         mbnscNMISideClock3 1.3.6.1.4.1.13842.6.2.4.40.1.20.3 integer read-only
State of side clock 3 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                         mbnscNMISideClock4 1.3.6.1.4.1.13842.6.2.4.40.1.20.4 integer read-only
State of side clock 4 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                         mbnscNMISideClock5 1.3.6.1.4.1.13842.6.2.4.40.1.20.5 integer read-only
State of side clock 5 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                         mbnscNMISideClock6 1.3.6.1.4.1.13842.6.2.4.40.1.20.6 integer read-only
State of side clock 6 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                         mbnscNMISideClock7 1.3.6.1.4.1.13842.6.2.4.40.1.20.7 integer read-only
State of side clock 7 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                         mbnscNMISideClock8 1.3.6.1.4.1.13842.6.2.4.40.1.20.8 integer read-only
State of side clock 8 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                         mbnscNMISideClock9 1.3.6.1.4.1.13842.6.2.4.40.1.20.9 integer read-only
State of side clock 9 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                         mbnscNMISideClock10 1.3.6.1.4.1.13842.6.2.4.40.1.20.10 integer read-only
State of side clock 10 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                         mbnscNMISideClock11 1.3.6.1.4.1.13842.6.2.4.40.1.20.11 integer read-only
State of side clock 11 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                         mbnscNMISideClock12 1.3.6.1.4.1.13842.6.2.4.40.1.20.12 integer read-only
State of side clock 12 0: Clock not configured 3: Clock OK 5: Clock error Enumeration: 'clockerror': 5, 'notconfigured': 0, 'clockok': 3.
                                   mbnscNMIConfigCmd 1.3.6.1.4.1.13842.6.2.4.40.1.100 unsigned32 read-write
General configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                                   mbnscNMIConfigChangedTime 1.3.6.1.4.1.13842.6.2.4.40.1.101 timeticks read-only
Time of the last configuration change.
                         mbnscModeConfigCmd 1.3.6.1.4.1.13842.6.2.4.100 unsigned32 read-write
Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                         mbnscModeConfigChangedTime 1.3.6.1.4.1.13842.6.2.4.101 timeticks read-only
Time of the last configuration change.
                     mbnscGeneral 1.3.6.1.4.1.13842.6.2.5
                         mbnscGeneralType 1.3.6.1.4.1.13842.6.2.5.1 integer32 read-only
Network slave clock type 1 Network Clock Interface NCI 2 Wireless Time Distribution WTD 868-T 3 NTP movement SEN 00 4 NTP movement NBU 190 5 Digital Clock ECO-DC 6 Digital Clock DC3 7 NTP movement SEN 40 8 NTP movement SAN 40 9 NTP digital clock DA 10 NTP calendar digital clock DK2 11 Network MOBALine Interface NMI 12 NTP clock TREND 13 NTP clock TREND double sided 14 NTP in- and outdoor digital clock DSC
                         mbnscGeneralName 1.3.6.1.4.1.13842.6.2.5.2 displaystring read-write
Device name (identifier)
                         mbnscGeneralFirmwareNumber 1.3.6.1.4.1.13842.6.2.5.3 displaystring read-only
Article number of the firmware.
                         mbnscGeneralFirmwareVer 1.3.6.1.4.1.13842.6.2.5.4 displaystring read-only
Firmware version.
                         mbnscGeneralStatus 1.3.6.1.4.1.13842.6.2.5.5 mobaflags64 read-only
Network slave clock status (64bit). Internal state of the network slave clock. Used for maintenance only. Bit 00 : time ok Bit 01 : 12h position Bit 02 : Reserved Bit 03 : Reserved Bit 04 : Reserved Bit 05 : Reserved Bit 06 : Reserved Bit 07 : Reserved Bit 08 : Reserved Bit 09 : Reserved Bit 10 : Reserved Bit 11 : Reserved Bit 12 : Reserved Bit 13 : Reserved Bit 14 : Reserved Bit 15 : Reserved Bit 16 : Reserved Bit 17 : Reserved Bit 18 : Reserved Bit 19 : Reserved Bit 20 : Reserved Bit 21 : Reserved Bit 22 : Reserved Bit 23 : Reserved Bit 24 : Reserved Bit 25 : Reserved Bit 26 : Reserved Bit 27 : Reserved Bit 28 : Reserved Bit 29 : Reserved Bit 30 : Reserved Bit 31 : Reserved Bit32..63 not used
                         mbnscGeneralAlarms 1.3.6.1.4.1.13842.6.2.5.6 mobaalarm64 read-only
Alarm state of the network slave clock Bit00=Synchronization Bit01=Power supply Bit02=Slave (cascade) Bit03=Illumination Bit04=Hands position (sec) Bit05=Hands position (m/h) Bit06=Restart Bit07=CommError Bit08=Time zone Bit09=Reserved Bit10=Reserved Bit11=Reserved Bit12=Reserved Bit13=Reserved Bit14=Reserved Bit15=Reserved Bit16=Reserved Bit17=Reserved Bit18=Reserved Bit19=Reserved Bit20=Reserved Bit21=Reserved Bit22=Reserved Bit23=Reserved Bit24=Reserved Bit25=Reserved Bit26=Reserved Bit27=Reserved Bit28=Reserved Bit29=Reserved Bit30=Reserved Bit31=Reserved Bit32..Bit63=Device type specific error
                         mbnscGeneralSlaveInfo1 1.3.6.1.4.1.13842.6.2.5.7 octet string read-only
Info from slave 1 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reserved
                         mbnscGeneralSlaveInfo2 1.3.6.1.4.1.13842.6.2.5.8 octet string read-only
Info from slave 2 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reserved
                         mbnscGeneralSlaveInfo3 1.3.6.1.4.1.13842.6.2.5.9 octet string read-only
Info from slave 3 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reserved
                         mbnscGeneralConfigCmd 1.3.6.1.4.1.13842.6.2.5.100 unsigned32 read-write
General configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                         mbnscGeneralConfigChangedTime 1.3.6.1.4.1.13842.6.2.5.101 timeticks read-only
Time of the last configuration change.
                     mbnscSupervision 1.3.6.1.4.1.13842.6.2.6
                         mbnscSNMPManager1 1.3.6.1.4.1.13842.6.2.6.1 displaystring read-write
String with IPv4 or IPv6 address (e.g 192.168.3.4 or FD03:2345:2345:2345::231) of the SNMP manager 1
                         mbnscSNMPManager2 1.3.6.1.4.1.13842.6.2.6.2 displaystring read-write
String with IPv4 or IPv6 address (e.g 192.168.3.4 or FD03:2345:2345:2345::231) of the SNMP manager 2
                         mbnscSNMPTrapAliveMsgInterval 1.3.6.1.4.1.13842.6.2.6.3 unsigned32 read-write
Time interval to send the alive message to the trap listener stations. 0: Alive message disabled >0: Alive message enabled Range: 1 ... 1440 minutes
                         mbnscSNMPConfigCmd 1.3.6.1.4.1.13842.6.2.6.100 unsigned32 read-write
SNMP / supervision services configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                         mbnscSNMPConfigChangedTime 1.3.6.1.4.1.13842.6.2.6.101 timeticks read-only
Time of the last configuration change.
                     mbnscCommand 1.3.6.1.4.1.13842.6.2.7
                         mbnscCommand12Pos 1.3.6.1.4.1.13842.6.2.7.1 unsigned32 read-write
Mode of the analogue clock: 0=run, 1=12h position
                         mbnscCommandSWReset 1.3.6.1.4.1.13842.6.2.7.2 unsigned32 read-write
Command SW reset if set to 1
                         mbnscCommandFactorySetting 1.3.6.1.4.1.13842.6.2.7.3 unsigned32 read-write
Restore factory settings if set to 1
                         mbnscCommandFirmwUpd 1.3.6.1.4.1.13842.6.2.7.4 octet string read-only
Command to start FW update
                         mbnscCommandExtContact 1.3.6.1.4.1.13842.6.2.7.5 integer32 read-only
Set external contact
                         mbnscCommandConfigCmd 1.3.6.1.4.1.13842.6.2.7.100 unsigned32 read-write
SNMP / supervision services configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
                     mbnscSnmpConfig 1.3.6.1.4.1.13842.6.2.9
                         mbnscSnmpCurrentAlarmInfo 1.3.6.1.4.1.13842.6.2.9.1
                             mbnscTrapAlMsgErrorNr 1.3.6.1.4.1.13842.6.2.9.1.1 unsigned32 no-access
Error number of the trap message.
                             mbnscTrapAlMsgErrorState 1.3.6.1.4.1.13842.6.2.9.1.2 unsigned32 no-access
Error state of the trap message.
                             mbnscTrapAlMsgErrorTime 1.3.6.1.4.1.13842.6.2.9.1.3 unsigned32 no-access
Error time of the trap message. Seconds since 1.1.1970 00:00:00
                     mbnscTraps 1.3.6.1.4.1.13842.6.2.10
                           mbnscTrapsAlarm 1.3.6.1.4.1.13842.6.2.10.1
Alarm trap with attached (binded variables) alarm information. mbnscTrapAlMsgErrorNr, mbnscTrapAlMsgErrorState, mbnscTrapAlMsgErrorTime
                           mbnscTrapsAlive 1.3.6.1.4.1.13842.6.2.10.2
Device alive trap. Will be send in the configured interval. Attached are the variables mbnscGeneralStatus and mbnscGeneralAlarms.
                 mbnscMIB 1.3.6.1.4.1.13842.6.100
This mib definition is used for all MOBATime network slave clocks.
                         mbnscMIBCompliance 1.3.6.1.4.1.13842.6.100.1
                             mbnscMIBCompliances 1.3.6.1.4.1.13842.6.100.1.1
Please replace this text with your description.
                         mbnscMIBGroups 1.3.6.1.4.1.13842.6.100.2
                             mbnscAllNotifications 1.3.6.1.4.1.13842.6.100.2.1
This automatically created notification group contains all notifications that do not belong to any other NOTIFICATION-GROUP
                             mbnscGrpNBU190 1.3.6.1.4.1.13842.6.100.2.2
All parameters used for NBU 190 movement
                             mbnscGrpSEN40 1.3.6.1.4.1.13842.6.100.2.3
All parameters used for SEN 40 movement
                             mbnscGrpDC 1.3.6.1.4.1.13842.6.100.2.4
All parameters used for DC digital clock
                             mbnscGrpECODC 1.3.6.1.4.1.13842.6.100.2.5
All parameters used for ECO DC digital clock
                             mbnscGrpDA 1.3.6.1.4.1.13842.6.100.2.6
All parameters used for DA digital clock
                             mbnscGrpDK 1.3.6.1.4.1.13842.6.100.2.7
All parameters used for DK digital clock
                             mbnscGrpNMI 1.3.6.1.4.1.13842.6.100.2.8
All parameters used for Network-MOBALine-Interface NMI
                             mbnscGrpNotUsedParameters 1.3.6.1.4.1.13842.6.100.2.100
All parameters not used in oother groups