MMB-COM-MIB: View SNMP OID List / Download MIB

VENDOR: FUJITSU LIMITED


 Home MIB: MMB-COM-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fujitsu 1.3.6.1.4.1.211
         products 1.3.6.1.4.1.211.1
             iaServer 1.3.6.1.4.1.211.1.31
                   primequest 1.3.6.1.4.1.211.1.31.1
                       mmb 1.3.6.1.4.1.211.1.31.1.1
                           sysInfo 1.3.6.1.4.1.211.1.31.1.1.1
                               agentInfo 1.3.6.1.4.1.211.1.31.1.1.1.1
                                   agentId 1.3.6.1.4.1.211.1.31.1.1.1.1.1 displaystring read-only
Agent identification string; Not supported.
                                   agentCompany 1.3.6.1.4.1.211.1.31.1.1.1.1.2 displaystring read-only
Agent's company name (e.g. Fujitsu Siemens Computers); Not supported.
                                   agentVersion 1.3.6.1.4.1.211.1.31.1.1.1.1.3 displaystring read-only
Agent's version string (e.g. 1.05); Not supported.
                                   agentBuild 1.3.6.1.4.1.211.1.31.1.1.1.1.4 displaystring read-only
Compilation time and date of agent program; Not supported.
                                   agentWriteAllowed 1.3.6.1.4.1.211.1.31.1.1.1.1.5 integer read-only
Defines whether writable objects can be written (except shutdown/power-off operations); Not supported. Enumeration: 'unknown': 1, 'write-not-allowed': 2, 'write-allowed': 3.
                                   agentShutdownAllowed 1.3.6.1.4.1.211.1.31.1.1.1.1.6 integer read-only
Defines whether shutdown/power-off objects can be written; Not supported. Enumeration: 'unknown': 1, 'shutdown-not-allowed': 2, 'shutdown-allowed': 3.
                               unitInformation 1.3.6.1.4.1.211.1.31.1.1.1.2
                                   localServerUnitId 1.3.6.1.4.1.211.1.31.1.1.1.2.1 integer read-only
Unit identifier number of the local server (usually is ID 1). This ID can be used as index into the units table.
                                       psPowerSupplyLoad 1.3.6.1.4.1.211.1.31.1.1.1.2.1.6 integer read-only
Actual power supply output load in Watts (0 = not available); Not supported.
                                   numberUnits 1.3.6.1.4.1.211.1.31.1.1.1.2.2 integer read-only
Number of available units (size of units table).
                                   unitTable 1.3.6.1.4.1.211.1.31.1.1.1.2.3 no-access
Description of all units in this MIB
                                       units 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1 no-access
                                           uUnitId 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.1 integer read-only
Unit identifier (index: 1..n)
                                           unitClass 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.2 integer read-only
Unit classification (type) Enumeration: 'gspb': 28, 'gspb-nodivided': 30, 'lpci-box': 34, 'iou-nodivided': 9, 'io': 7, 'partition': 2, 'op-panel': 20, 'pci-box': 10, 'iou-divided': 8, 'dvdb': 33, 'gspb-divided': 29, 'chassis': 1, 'fan': 35, 'sas-unit': 31, 'fan-tray': 17, 'sb': 4, 'ps': 32, 'free-pool': 3, 'd': 36, 'mmb': 21.
                                           unitCainetNr 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.3 integer read-only
Physical identification number or partition identification number of units. The ID of the 'chassis' is usually 0.
                                           unitDesignation 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.4 displaystring read-only
Unit identification name. (e.g. 'SB#1') This object returns 'Part Number'; if the index shows chassis.
                                           unitModelName 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.5 displaystring read-only
Unit model name (e.g. 'PRIMERGY PRIMEQUEST 3200 model xxx')
                                           unitManufacturer 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.6 displaystring read-only
Unit manufacturer name (e.g. 'Fujitsu')
                                           unitSerialNumber 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.7 displaystring read-only
Unit serial number (e.g. '0202456123')
                                           unitLocation 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.8 displaystring read-only
Unit location string (e.g. 'ServerCenter Room 17; Rack 9')
                                           unitContact 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.9 displaystring read-only
Unit contact name (e.g. 'Mr. Bond')
                                           unitAdminURL 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.10 displaystring read-only
URL of administration HTML interface(MMB-GUI) (e.g. 'http://MyServer/admin')
                                           frontDoorStatus 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.11 integer read-only
Status describing whether the front door is open or closed; Not supported. Enumeration: 'unknown': 1, 'open': 2, 'close': 3.
                                           housingOpenStatus 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.12 integer read-only
Status describing whether the housing is open or closed; Not supported. Enumeration: 'opened-and-closed': 4, 'unknown': 1, 'open': 2, 'close': 3.
                                           msgLogLanguages 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.13 displaystring read-only
Supported languages of text message log (comma-seperated list of decimal language codes; see sc2MessageTextLogTable). e.g. '1031;1033' means German and English are supported. English (1033) is the default language and is always available; Not supported.
                                           unitWorldWideName 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.14 displaystring read-only
Unit World Wide Name. A 64-bit sized address for storage devices (e.g. '6661E2B0A00B88FB'); Not supported.
                                           remcsId 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.15 displaystring read-only
REMCS system identification string (binary data); Not supported. Format of Fujitsu REMCS ID (40byte) Format = TTMMMMMMMMMMMMmmmmmmmmmmmmCCnnnnnnnnnnnn TT : 2byte : Type ID for Company Name MM...M : 12byte : Model Name mm...m : 12byte : Device Name CC : 2byte : Checksum nn...n : 12byte : Serial number
                                           assetTag 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.16 displaystring read-only
Customer specific asset tag (40 bytes)
                                           unitManagementIpAddress 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.18 displaystring read-only
IPv4 address of the partition for management purpose (e.g. '192.168.0.140')
                                           unitManagementIpAddressV6 1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.20 displaystring read-only
IPv6 address of the partition for management purpose (e.g. '2001:0db8:0000:85a3:0000:0000:ac1f:8001')
                                   unitTableUpdateCount 1.3.6.1.4.1.211.1.31.1.1.1.2.4 integer read-only
Counter defining the update revision of the unit table. This counter is incremented with every table contents change/update.
                                   unitParentTable 1.3.6.1.4.1.211.1.31.1.1.1.2.5 no-access
Parent-child relationship of all units
                                       unitParents 1.3.6.1.4.1.211.1.31.1.1.1.2.5.1 no-access
                                           pUnitId 1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.1 integer read-only
Unit identifier (index: 1..n)
                                           pParentNr 1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.2 integer read-only
Parent number (index: 1..n)
                                           parentUnit 1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.3 integer read-only
Parent unit. This is the same value as in the object of 'pParentNr'.
                                           parentUnitClass 1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.4 integer read-only
Unit classification (type). This is the same value as in units table. Enumeration: 'gspb': 28, 'gspb-nodivided': 30, 'lpci-box': 34, 'iou-nodivided': 9, 'io': 7, 'partition': 2, 'op-panel': 20, 'pci-box': 10, 'iou-divided': 8, 'dvdb': 33, 'gspb-divided': 29, 'chassis': 1, 'fan': 35, 'sas-unit': 31, 'fan-tray': 17, 'sb': 4, 'ps': 32, 'free-pool': 3, 'd': 36, 'mmb': 21.
                                   unitChildTable 1.3.6.1.4.1.211.1.31.1.1.1.2.6 no-access
Parent-child relationship of all units
                                       unitChilds 1.3.6.1.4.1.211.1.31.1.1.1.2.6.1 no-access
                                           cUnitId 1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.1 integer read-only
Unit identifier (index: 1..n)
                                           cChildNr 1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.2 integer read-only
Child number (index: 1..n)
                                           childUnit 1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.3 integer read-only
Child unit. This is the same value as in the object of 'cChildNr'.
                                           childUnitClass 1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.4 integer read-only
Unit classification (type). This is the same value as in units table. Enumeration: 'gspb': 28, 'gspb-nodivided': 30, 'lpci-box': 34, 'iou-nodivided': 9, 'io': 7, 'partition': 2, 'op-panel': 20, 'pci-box': 10, 'iou-divided': 8, 'dvdb': 33, 'gspb-divided': 29, 'chassis': 1, 'fan': 35, 'sas-unit': 31, 'fan-tray': 17, 'sb': 4, 'ps': 32, 'free-pool': 3, 'd': 36, 'mmb': 21.
                                   parentChildTableUpdateCount 1.3.6.1.4.1.211.1.31.1.1.1.2.7 integer read-only
Counter defining the update revision of the parent-child unit table. This counter is incremented with every table contents change/update.
                               management 1.3.6.1.4.1.211.1.31.1.1.1.3
                                   managementNodeTable 1.3.6.1.4.1.211.1.31.1.1.1.3.1 no-access
SNMP management node addresses (how to address the units)
                                       managementNodes 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1 no-access
                                           mnUnitId 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.1 integer read-only
Unit identifier (index: 1..n)
                                           mnNodeNr 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.2 integer read-only
Management node address number (index: 1..n)
                                           unitNodeIfType 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.3 integer read-only
Management node interface type Enumeration: 'ipv6-virtual-ip': 6, 'ipv6-ip': 4, 'unknown': 1, 'ip': 2, 'ipx': 3, 'virtual-ip': 5.
                                           unitNodeAddress 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.4 displaystring read-only
Management node address (e.g. 192.168.0.100)
                                           unitNodeIpNetmask 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.5 displaystring read-only
Management node address (e.g. 255.255.255.128)
                                           unitNodeGateway 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.6 displaystring read-only
Management node address (e.g. 192.168.0.126)
                                           unitNodeName 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.7 displaystring read-only
Management node name (e.g. 'primequest-no1')
                                           unitNodeClass 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.8 integer read-only
Management node class: primary: operating system interface secondary: remote management controller interface management-blade: management blade in blade server secondary-backup: backup remote management controller interface Enumeration: 'secondary-manegement-blade': 8, 'primery': 2, 'unknown': 1, 'secondary-remote-backup': 6, 'manegement-blade': 4, 'secondary-remote': 5, 'baseboard-controller': 7, 'secondary': 3.
                                           unitNodeMacAddress 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.9 physaddress read-only
Management node hardware (MAC) address; ff:ff:ff:ff:ff:ff if value not available
                                           unitNodeUseDHCP 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.10 integer read-only
Management node uses DHCP to obtain its address Enumeration: 'unknown': 1, 'use-fixed-address': 2, 'use-dhcp': 3.
                                           unitNodeControllerType 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.11 displaystring read-only
The type of the remote management controller (for identification); like 'RSB'; 'RSB S2'; 'RSB S2 LP'... These names will not be changed if defined once; Not supported.
                                           unitNodeControllerModel 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.12 displaystring read-only
The model name of the remote management controller (for displaying); like 'Remote Service Board'; RemoteView Service Board S2'c This name should not be used for identification;only for displaying (can be changed in different firmware versions)! Not supported.
                                           unitNodeControllerFWVersion 1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.13 displaystring read-only
The FW version of the remote management controller; Not supported.
                                   nodeTableUpdateCount 1.3.6.1.4.1.211.1.31.1.1.1.3.2 integer read-only
Counter defining the update revision of the management node table. This counter is incremented with every table contents change/update.
                                   managementChannelType 1.3.6.1.4.1.211.1.31.1.1.1.3.3 integer read-only
The type of the management channel currently used (this MIB instance). Enumeration: 'unknown': 1, 'secondary': 3, 'primery': 2.
                                   managementProcessorTable 1.3.6.1.4.1.211.1.31.1.1.1.3.4 no-access
System management service processors
                                       managementProcessors 1.3.6.1.4.1.211.1.31.1.1.1.3.4.1 no-access
                                           spUnitId 1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.1 integer read-only
Unit identifier (index: 1..n)
                                           spProcessorNr 1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.2 integer read-only
Service processor number (index: 1..n)
                                           spModelName 1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.3 displaystring read-only
Service processor model name
                                           spFirmwareVersion 1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.4 displaystring read-only
Service processor firmware version / revision
                                           spBatteryStatus 1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.5 integer read-only
Service processor backup battery status Enumeration: 'discharging': 7, 'ok': 3, 'unknown': 1, 'recharging': 5, 'failed': 6, 'not-present': 2, 'on-battery': 4.
                                           spBatteryDischargeTime 1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.6 integer read-only
Maximum time (in seconds) this backup battery can discharged. after that a shutdown will be performed (-1 = unknown); Not supported.
                                           spTimeOnBattery 1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.7 counter read-only
Time (in seconds) the service processor is running on battery since power fail (will be cleared on power recovery); Not supported.
                                           spDoBatteryChargeCycle 1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.8 integer read-write
Perform a discharge/charge cycle on the backup battery by writing a non-zero value. Reading this object just returns the value 0; Not supported.
                                           spBatteryChargeLevel 1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.9 gauge read-only
Reads the current charge level of the rechargeable battery (in percent of the maximum capacity); Not supported.
                                   managedUpsNodeTable 1.3.6.1.4.1.211.1.31.1.1.1.3.5 no-access
UPS nodes managed by the units; Not supported.
                                       managedUpsNodes 1.3.6.1.4.1.211.1.31.1.1.1.3.5.1 no-access
                                           upsUnitId 1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.1 integer read-only
Unit identifier (index: 1..n); Not supported.
                                           upsNr 1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.2 integer read-only
UPS number (index: 1..n); Not supported.
                                           upsVendorName 1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.3 displaystring read-only
UPS vendor name; Not supported.
                                           upsModelName 1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.4 displaystring read-only
UPS model name; Not supported.
                                           upsIpAddress 1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.5 displaystring read-only
UPS IP address (represented as string; may also contain an IP V6 address); Not supported.
                                           upsMibRoot 1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.6 displaystring read-only
UPS MIB root OID; specifies the root OID of the MIB to be used to query UPS via SNMP (empty string if no SNMP agent available); Not supported.
                                           upsSnmpCommunity 1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.7 displaystring read-only
UPS SNMP community name (empty string if no SNMP agent available); Not supported.
                                           upsHttpPort 1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.8 integer read-only
UPS HTTP interface port; specifies the TCP port number for accessing the UPS management interface via HTTP (0 if no HTTP server available); Not supported.
                                   managementTimeZone 1.3.6.1.4.1.211.1.31.1.1.1.3.6 displaystring read-only
Management node timezone (e.g. '2004-9-22 12:15:18+09:00')
                               serverInformation 1.3.6.1.4.1.211.1.31.1.1.1.4
                                   serverTable 1.3.6.1.4.1.211.1.31.1.1.1.4.1 no-access
Table containing information about the available servers
                                       servers 1.3.6.1.4.1.211.1.31.1.1.1.4.1.1 no-access
                                           srvUnitId 1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.1 integer read-only
Unit identifier (index: 1..n)
                                           srvPhysicalMemory 1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.2 integer read-only
Size of physical main memory installed (MBytes); Not supported.
                                           srvLastBootResult 1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.3 integer read-only
Result of last system boot; Not supported. Enumeration: 'no-boot-cp': 4, 'diagnostic-boot-failed': 7, 'os-boot-successful': 2, 'unknown': 1, 'diagnostic-boot-successful': 3, 'hardware-failure': 8, 'no-bootable-media': 5, 'os-failed-load': 6.
                                           srvCurrentBootStatus 1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.4 integer read-only
Status of the current boot unknown(1)' returns; during the Power-on->POST and the shutdown->Power-off. Enumeration: 'no-boot-cp': 3, 'reset': 12, 'os-shutdown': 10, 'off': 2, 'halt': 16, 'xpar-firm-running': 17, 'dumping': 15, 'unknown': 1, 'setup': 5, 'diagnostic-shutdown': 11, 'os-boot': 6, 'os-running': 8, 'diagnostic-boot': 7, 'panic': 13, 'check-stop': 14, 'self-test': 4, 'diagnostic-running': 9.
                                           srvShutdownCommand 1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.5 integer read-write
Shutdown the server and switch off or reset; a delay (see object below) can be defined before the command is being executed; on reading that value you get the currently pending or executing command value; argument tells what kind of action: power-on: switch power on power-off: switch power off power-cycle: switch power off and switch power on again. shutdown-and-off: execute a shutdown then power off shutdown-and-reset: execute a shutdown then reset shutdown-and-power-cycle: execute a shutdown then power off and on again raise-nmi: raise an NMI (normally causes debugger to start) The value unknown(1) cannot be set; Not supported. Enumeration: 'reset': 10, 'power-off': 2, 'unknown': 1, 'raise-nmi': 8, 'power-on': 3, 'shutdown-and-off': 5, 'shutdown-and-reset': 6, 'abort-pending-command': 9, 'shutdown-and-power-cycle': 7, 'power-cycle': 4.
                                           srvShutdownDelay 1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.6 integer read-write
Delay time (seconds) the agent waits before executing the shutdown command (see previous command). 0 = immediate action; no delay -1 = unknown (delay not supported) The value unknown(-1) cannot be set; Not supported.
                                           srvUUID 1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.7 displaystring read-only
Universal Unique ID (UUID) number - this is a world wide unique ID number of the server. Can be used for identifying a server. The format is like this: 157E465A-A4AC-D711-A847-DD85CECD12EC.
                                           srvPhysicalMemoryOs 1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.8 integer read-only
Size of physical main memory available to the operating system (MBytes). This value is similar to sc2srvPhysicalMemory'; but may be less if the system has mirror or hot spare memory modules; Not supported.
                                           srvTpmMode 1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.9 integer read-only
Trusted Platform Module(TPM) setting. Enumeration: 'enable': 2, 'disable': 1.
                                           srvManagementIP 1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.10 displaystring read-only
BMC management address (e.g. 192.168.0.150)
                                   unitPowerOnOffTable 1.3.6.1.4.1.211.1.31.1.1.1.4.2 no-access
Unit power-on and -off information
                                       unitPowerOnOff 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1 no-access
                                           ooUnitId 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.1 integer read-only
Unit identifier (index: 1..n)
                                           powerOnOffStatus 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.2 integer read-only
Current power on/off status Enumeration: 'unknown': 1, 'off': 2, 'on': 3.
                                           lastPowerOffSource 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.3 integer read-only
Reason why the system was switched off last time; Not supported. Enumeration: 'remote-off': 11, 'fan-fail': 6, 'power-limiting': 35, 'watchdog-power-cycle': 37, 'temperature-damage': 8, 'keyboard': 29, 'watchdog': 10, 'power-supply-failure': 9, 'power-button': 3, 'ac-fail': 4, 'clock': 5, 'swoff-command': 2, 'unknown': 1, 'temperature-critical': 7, 'warmstart': 24, 'reset-button': 25, 'firmware-restart': 242, 'cpu-error': 14, 'remote-manager-reset': 32, 'hardware-reset': 23, 'nmi': 20, 'mmb-continuous-operation': 36, 'peripheral-bus-error': 13, 'remote-manager': 31, 'hardware-fail': 12, 'ac-fail-reboot': 26, 'housing-opened': 243.
                                           lastPowerOnSource 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.4 integer read-only
Source the system was switched on from; Not supported. Enumeration: 'fan-fail': 6, 'chipcard-reader': 30, 'temperature-damage': 8, 'keyboard': 29, 'watchdog': 10, 'power-supply-failure': 9, 'power-button': 3, 'ac-fail': 4, 'clock': 5, 'swoff-command': 2, 'unknown': 1, 'mgmt-processor-fail': 27, 'temperature-critical': 7, 'warmstart': 24, 'power-cycle': 33, 'reset-button': 25, 'pci-pme': 28, 'remote-on': 11, 'firmware-restart': 242, 'cpu-error': 14, 'remote-manager-reset': 32, 'hardware-reset': 23, 'nmi': 20, 'peripheral-bus-error': 13, 'remote-manager': 31, 'hardware-fail': 12, 'ac-fail-reboot': 26, 'housing-opened': 243.
                                           lastPowerOnTime 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.5 integer read-only
Time and Date the system was booted (seconds since 1/1/1970; -1 = unknown); Not supported.
                                           powerOnCounts 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.6 integer read-only
Tells how often the server was switched on in its life (-1 = unknown); Not supported.
                                           powerOnDuration 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.7 integer read-only
Tells how long the system has stayed ON in its life (in hours; -1 = unknown); Not supported.
                                           powerOffDuration 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.8 integer read-only
Tells how long the system has stayed OFF in its life (in hours; -1 = unknown); Not supported.
                                           powerFailRecovery 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.9 integer read-only
Action on AC power recovery after AC has failed. not-available(2) : function not available; behavior is hardware-defined. as-before(3) : server gets the same power state as before the AC fail. remain-off(4) : server remains off on power resume. switch-on(5) : server is always switched on on power resume. schedule-sync(6) : server synchronizes the power state with the schedule setting. Enumeration: 'not-available': 2, 'schedule-sync': 6, 'unknown': 1, 'switch-on': 5, 'as-before': 3, 'remain-off': 4.
                                           powerCommand 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.10 integer read-write
Switch the unit on or off; argument tells what kind of action: on: switch power on off: switch power off power-cycle: switch power off and switch power on again. The value unknown(1) cannot be set; Not supported. Enumeration: 'unknown': 1, 'off': 2, 'power-cycle': 4, 'on': 3.
                                           powerSupplyRedundancy 1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.11 integer read-only
Specifies whether the power supply system contains redundant power supplies: 0 : no redundant power supplies available 1 : redundant power supplies available
                                   performanceTable 1.3.6.1.4.1.211.1.31.1.1.1.4.3 no-access
Server performance and utilization information; Not supported.
                                       performance 1.3.6.1.4.1.211.1.31.1.1.1.4.3.1 no-access
                                           perfUnitId 1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.1 integer read-only
Unit identifier (index; 1..n); Not supported.
                                           perfNr 1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.2 integer read-only
Server performance entry number (index; 1..n)
                                           perfType 1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.3 integer read-only
Server performance object type (description see below); Not supported. Enumeration: 'memory-physical': 6, 'memory-percent': 8, 'pci-transfer': 5, 'pci-load': 3, 'memory-total': 7, 'cpu-pverall': 2, 'pci-efficiency': 4, 'cp': 1.
                                           performanceValue 1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.4 gauge read-only
Server performance value (value interpretation depending on type):; Not supported. cpu: Load of a single CPU in percent cpu-overall: Overall CPU load in percent pci-load: PCI bus load in percent pci-efficiency: PCI bus efficiency in percent (100% is optimum) pci-transfer: PCI bus transfer rate in MBytes/sec. memory-physical: Physical memory usage in MBytes memory-total: Total memory usage (physical + virtual) in MBytes memory-percent: Physical memory usage in percent
                                           performanceName 1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.5 displaystring read-only
Name (short description) of the performance value (e.g. 'CPU1'). Can be used for displaying a list of performance values in the management frontend; Not supported.
                                   timerOnOffTable 1.3.6.1.4.1.211.1.31.1.1.1.4.4 no-access
Power on/off timer table; Not supported.
                                       timerOnOff 1.3.6.1.4.1.211.1.31.1.1.1.4.4.1 no-access
                                           tooUnitId 1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.1 integer read-only
Unit identifier (index: 1..n); Not supported.
                                           tooDayOfWeek 1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.2 integer read-only
Day of the week the times should act upon (index); 1=Sunday 2=Monday... ; Not supported.
                                           onTime 1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.3 integer read-write
Time the system should be switched on (by the real-time clock; in minutes since midnight; -1 = disabled; no on time). Only values -1 and 0..1439 are allowed; Not supported.
                                           offTime 1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.4 integer read-write
Time the system should be switched off (by the real-time clock of software; in minutes since midnight; -1 = disabled; no on time). Only values -1 and 0..1439 are allowed; Not supported.
                                   powerMonitoringTable 1.3.6.1.4.1.211.1.31.1.1.1.4.5 no-access
Power monitoring table
                                       powerMonitoring 1.3.6.1.4.1.211.1.31.1.1.1.4.5.1 no-access
                                           pmUnitId 1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.1 integer read-only
Unit identifier (index: 1..n)
                                           pmCurrentPowerMonitoringAvailable 1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.2 truefalse read-only
Power monitoring and control available on this server: true: Power monitoring and power control is available false: Power monitoring and power control is not available
                                           pmCurrentPowerMonitoringEnabled 1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.3 truefalse read-only
Power monitoring enable value: true: Power monitoring and data gathering is enabled false: Power monitoring and data gathering is disabled or not available
                                           pmNominalPowerConsumption 1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.4 integer read-only
Nominal (maximum) value of the system's power consumption (in Watts; -1 if value not available)
                                           pmCurrentPowerConsumption 1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.5 gauge read-only
Current value of the system's power consumption (in Watts; 4294967295(0xffffffff) if value not available)
                                           pmCurrentPowerControl 1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.6 integer read-only
Power mode control value; Not supported. disabled: The baseboard management controller does not control the power saving behaviour best-performance: The baseboard management controller gives best performance to the system (power consumption may be increased) minimum-power: The baseboard management controller controls the system in way to consume minimum power (performance may be reduced) automatic: The baseboard management controller automatically controls power consumption between good performance and low power consumption scheduled: The baseboard management controller controls power consumption by schedule Enumeration: 'scheduled': 6, 'minimum-power': 4, 'limited': 7, 'unknown': 1, 'best-performance': 3, 'disabled': 2, 'automatic': 5.
                                           pmPowerLimitThreshold 1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.8 integer read-only
Maximum limit value of the system's power consumption (in Watts; -1 if value not available; only valid if limiting enabled)
                                           pmPowerControlMode 1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.11 integer read-only
Configured power control mode value: disabled: The management controller does not control the power saving behaviour best-performance: The management controller gives best performance to the system (power consumption may be increased) minimum-power: The management controller controls the system in way to consume minimum power (performance may be reduced) automatic: The management controller automatically controls power consumption between good performance and low power consumption scheduled: The management controller controls power consumption by schedule limited: The management controller controls power consumption by power limit low-noise: The management controller controls the power to ensure running Enumeration: 'scheduled': 6, 'minimum-power': 4, 'limited': 7, 'unknown': 1, 'low-noise': 8, 'best-performance': 3, 'disabled': 2, 'automatic': 5.
                                           pmPowerDisplayUnit 1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.12 integer read-only
Configurd unit for the display of power consumption values: Watt: Power consumption values are displayed in Watts Btu/h: Power consumption values are displyed in Btu Enumeration: 'watt': 2, 'unknown': 1, 'bt': 3.
                                   utilizationHistoryTable 1.3.6.1.4.1.211.1.31.1.1.1.4.6 no-access
Utilization history table (for power consumption); table only contains existing values (no values for non-existing values); Not supported.
                                       utilizationHistory 1.3.6.1.4.1.211.1.31.1.1.1.4.6.1 no-access
                                           uthUnitId 1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.1 integer read-only
Unit identifier (index; 1..n); Not supported.
                                           uthEntity 1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.2 integer read-only
Utilization value entity; describes what kind of value to be requested; Not supported. powerConsumptionDay: power consumption values of the last 24 hours; one value (Watts) per minute powerConsumptionMonth: power consumption values of the last month; one value (Watts) per hour powerConsumptionYear: power consumption values of the last year; one value (Watts) per day Enumeration: 'powerConsumptionYear': 3, 'powerConsumptionDay': 1, 'powerConsumptionMonth': 2.
                                           uthTimeStamp 1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.3 integer read-only
Time stamp of the currenty history entry (time_t = seconds since 1/1/1970; 0:00 AM); Not supported.
                                           uthHardwareUUID 1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.4 displaystring read-only
UUID of the hardware instance that delivered the value (from object sc2srvUUID); may change if an installation is migrated to another hardware (e.g. in blade environments); Not supported.
                                           uthAverageValue 1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.5 gauge read-only
Average value (in Watts) within the monitored time period (minute; hour; day); Not supported.
                                           uthMinValue 1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.6 gauge read-only
Minimum (lowest) value within the monitored time period; Not supported.
                                           uthMaxValue 1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.7 gauge read-only
Maximum (highest) value within the monitored time period; Not supported.
                                   powerSourceInformationTable 1.3.6.1.4.1.211.1.31.1.1.1.4.7 no-access
Power source information table
                                       powerSourceInformation 1.3.6.1.4.1.211.1.31.1.1.1.4.7.1 no-access
                                           psiUnitId 1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.1 integer read-only
Unit identifier (index; 1..n)
                                           psiPowerSourceType 1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.2 displaystring read-only
System input power source type (e.g. 'AC'; 'DC')
                                           psiPowerSourcePhase 1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.3 integer read-only
System input phase of power source. Enumeration: 'unknown': 1, 'three-phase': 3, 'single-phase': 2.
                                           psiPowerSourceVoltage 1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.4 integer read-only
System nominal input voltage of power source (in Volts; -1 if value not available).
                               environment 1.3.6.1.4.1.211.1.31.1.1.1.5
                                   temperatureSensorTable 1.3.6.1.4.1.211.1.31.1.1.1.5.1 no-access
Temperature sensors
                                       temperatureSensors 1.3.6.1.4.1.211.1.31.1.1.1.5.1.1 no-access
                                           tempUnitId 1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.1 integer read-only
Unit identifier (index: 1..n)
                                           tempSensorNr 1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.2 integer read-only
Temperature sensor number (index: 0..n)
                                           tempSensorDesignation 1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.3 displaystring read-only
Temperature sensor designation (e.g. SB#0-CPU#A0 Temp.)
                                           tempSensorIdentifier 1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.4 displaystring read-only
Temperature sensor identification string (e.g. TEMP-RSB1); Not supported.
                                           tempSensorStatus 1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.5 integer read-only
Status of the temperature sensor Status mapping. SEL level MIB Value Warning temperature-warning(6) Error temperature-critical(7) Error failed(5) Enumeration: 'not-available': 2, 'ok': 3, 'temperature-warning': 6, 'unknown': 1, 'temperature-critical': 7, 'failed': 5.
                                           tempCurrentTemperature 1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.6 integer read-only
Current temperature at this sensor (degrees Celsius). This object returns 0; if the agent can not get the value.
                                           tempWarningLevel 1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.7 integer read-only
Maximum temperature - warning level (degrees Celsius)
                                           tempCriticalLevel 1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.8 integer read-only
Maximum temperature - critical level (degrees Celsius). system shutdown may occur if this level is exceeded.
                                           tempCriticalReaction 1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.9 integer read-only
Reaction if temperature exceeds the critical level. Enumeration: 'shutdown-and-poweroff': 3, 'unknown': 1, 'continue': 2.
                                   fanTable 1.3.6.1.4.1.211.1.31.1.1.1.5.2 no-access
Fans
                                       fans 1.3.6.1.4.1.211.1.31.1.1.1.5.2.1 no-access
                                           fanUnitId 1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.1 integer read-only
Unit identifier (index: 1..n)
                                           fanNr 1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.2 integer read-only
Fan number (index: 0..n)
                                           fanDesignation 1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.3 displaystring read-only
Fan designation (e.g. FAN-TRAY#00-Fan#00-1)
                                           fanIdentifier 1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.4 displaystring read-only
Fan identification string (e.g. FAN-1-POWERSUPPLY); Not supported.
                                           fanStatus 1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.5 integer read-only
Status of the fan Status mapping. SEL level MIB Value Error failed(5) Enumeration: 'prefailed-predicted': 5, 'redundant-fan-failed': 6, 'ok': 3, 'unknown': 1, 'disabled': 2, 'failed': 4, 'not-manageable': 7, 'not-present': 8.
                                           fanCurrentSpeed 1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.6 integer read-only
Current fan speed (revolutions per minute). This object returns 0; if the agent can not get the value.
                                           fanQuality 1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.7 integer read-only
Quality of fan (in percent of nominal speed - measured at full speed); Not supported.
                                           fanFailReaction 1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.8 integer read-only
Reaction if the fan fails. Enumeration: 'shutdown-and-poweroff': 3, 'unknown': 1, 'continue': 2.
                                           fanFailShutdownDelay 1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.9 integer read-write
Delay time (in seconds) when shutdown should commit on fan fail (if shutdown-and-off is configured; 0 = immediately -1 = unknown; cannot be set); Not supported.
                                   airflowTable 1.3.6.1.4.1.211.1.31.1.1.1.5.3 no-access
Exhaust airflow volume table
                                       airflow 1.3.6.1.4.1.211.1.31.1.1.1.5.3.1 no-access
                                           afUnitId 1.3.6.1.4.1.211.1.31.1.1.1.5.3.1.1 integer read-only
Unit identifier (index; 1..n)
                                           afExhaustAirflowVolume 1.3.6.1.4.1.211.1.31.1.1.1.5.3.1.2 integer read-only
System exhaust airflow volume ('-1' if value not available)
                                           afExhaustAirflowVolumeUnit 1.3.6.1.4.1.211.1.31.1.1.1.5.3.1.3 displaystring read-only
System exhaust airflow volume unit (e.g. 'cbm/h'; 'ccm/min'; ...)
                               hardware 1.3.6.1.4.1.211.1.31.1.1.1.6
                                   systemBoardTable 1.3.6.1.4.1.211.1.31.1.1.1.6.1 no-access
System board (main board) information
                                       systemBoard 1.3.6.1.4.1.211.1.31.1.1.1.6.1.1 no-access
                                           sbUnitId 1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.1 integer read-only
Unit identifier (index: 1..n)
                                           systemBoardModelName 1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.2 displaystring read-only
Model name (e.g. 'System Board')
                                           systemBoardProductNumber 1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.3 displaystring read-only
Product number (may be identical to ModelName)
                                           systemBoardRevision 1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.4 displaystring read-only
Revision string (e.g. 'WGS1 GS3')
                                           systemBoardSerialNumber 1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.5 displaystring read-only
Serial number (not available for all boards)
                                   powerSupplyTable 1.3.6.1.4.1.211.1.31.1.1.1.6.2 no-access
Power supplies
                                       powerSupply 1.3.6.1.4.1.211.1.31.1.1.1.6.2.1 no-access
                                           psUnitId 1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.1 integer read-only
Unit identifier (index: 1..n)
                                           psPowerSupplyNr 1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.2 integer read-only
Power supply (bay) number (index: 0..n)
                                           powerSupplyDesignation 1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.3 displaystring read-only
Power supply designation (e.g. PWRSYS#1-FEP#0)
                                           powerSupplyIdentifier 1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.4 displaystring read-only
Power supply identification string (e.g. PS1); Not supported.
                                           powerSupplyStatus 1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.5 integer read-only
Power supply status Status mapping. SEL level MIB Value Warning ac-fail(5) Warning predictive-fail(9) Error failed(4) Error not-manageable(8) Enumeration: 'not-manageable': 8, 'ok': 3, 'ac-fail': 5, 'unknown': 1, 'critical-temperature': 7, 'failed': 4, 'not-present': 2, 'predictive-fail': 9, 'dc-fail': 6.
                                   voltageTable 1.3.6.1.4.1.211.1.31.1.1.1.6.3 no-access
Voltages - all voltage values are in 1/100th Volts; a value of 330 means 3.30 Volts (0xffffffff = unknown)
                                       voltages 1.3.6.1.4.1.211.1.31.1.1.1.6.3.1 no-access
                                           voUnitId 1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.1 integer read-only
Unit identifier (index: 1..n)
                                           voSensorNr 1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.2 integer read-only
Voltage sensor number (index: 0..n)
                                           voltageDesignation 1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.3 displaystring read-only
Voltage designation string (e.g. SB#1-+5V#1)
                                           voltageStatus 1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.4 integer read-only
Voltage status Status mapping. SEL level MIB Value Warning low-warning(7) Warning high-warning(8) Error too-low(4) Error too-high(5) Enumeration: 'not-available': 2, 'ok': 3, 'sensor-failed': 6, 'unknown': 1, 'high-warning': 8, 'too-low': 4, 'low-warning': 7, 'too-high': 5.
                                           voltageCurrentValue 1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.5 integer read-only
Voltage current value. This object returns 0; if the agent can not get the value.(1/100V)
                                           voltageNominalValue 1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.6 integer read-only
Voltage nominal value; Not supported.
                                           voltageMinimumLevel 1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.7 integer read-only
Voltage minimum level (1/100V)
                                           voltageMaximumLevel 1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.8 integer read-only
Voltage maximum level (1/100V)
                                           voltageCurrentLoad 1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.9 gauge read-only
Current output load on this voltage line. in percent of the maximum load (0xffffffff = unknown); Not supported.
                                   cpuTable 1.3.6.1.4.1.211.1.31.1.1.1.6.4 no-access
CPU description table
                                       cpus 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1 no-access
                                           cpuUnitId 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.1 integer read-only
Unit identifier (index: 1..n)
                                           cpuNr 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.2 integer read-only
CPU (socket) number (index: 0..n)
                                           cpuDesignation 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.3 displaystring read-only
CPU designation (e.g. SB#0-CPU#A0)
                                           cpuStatus 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.4 integer read-only
CPU status Status mapping. SEL level MIB Value Warning disabled(4) Warning prefailed-warning(8) Error failed(6) Enumeration: 'prefailed-warning': 8, 'ok': 3, 'unknown': 1, 'disabled': 4, 'failed': 6, 'not-present': 2, 'error': 5, 'missing-termination': 7.
                                           cpuModelName 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.5 displaystring read-only
CPU model name (e.g. Itanium2 Processor)
                                           cpuManufacturer 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.6 displaystring read-only
CPU manufacturer name (e.g. Intel); Not supported.
                                           cpuStep 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.7 displaystring read-only
CPU step / revision
                                           cpuCurrentSpeed 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.8 integer read-only
CPU speed (frequency in MHz)
                                           cpuNumberLogicals 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.9 integer read-only
Number of (physically available) logical CPUs within one physical CPU (for hyper-threading and multi-core CPUs). This is the sum of all cores and all logical CPUs of a hyper-threading CPU; Not supported.
                                           cpuCacheL1Size 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.10 integer read-only
Size of first level cache (in kBytes; -1 if unknown); Not supported.
                                           cpuCacheL2Size 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.11 integer read-only
Size of second level cache (in kBytes; -1 if unknown); Not supported.
                                           cpuCacheL3Size 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.12 integer read-only
Size of third level cache (in kBytes; -1 if unknown)
                                           cpuNumberCores 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.13 integer read-only
Number of (physically available) cores within one physical CPU (for multi-core CPUs; platform dependent)
                                           cpuFamily 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.14 integer read-only
CPU family code. This enumerated value is specified by the DMTF SMBIOS specification (processor information; type 4); Not supported.
                                           cpuEnabledCores 1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.15 integer read-only
Number of effectively enabled cores within one physical CPU (for multi-core CPUs; 0 if unknown)
                                   memoryModuleTable 1.3.6.1.4.1.211.1.31.1.1.1.6.5 no-access
Main memory module table
                                       memoryModules 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1 no-access
                                           memUnitId 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.1 integer read-only
Unit identifier (index: 1..n)
                                           memModuleNr 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.2 integer read-only
Memory module (socket) number (index: 0..n)
                                           memModuleDesignation 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.3 displaystring read-only
Memory module designation (e.g. SB#0-DIMM#0A0)
                                           memModuleStatus 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.4 integer read-only
Memory module status Status mapping. SEL level MIB Value Warning failed-disabled(4) Warning warning(7) Error error(5) Error configuration-error(9) Enumeration: 'configuration-error': 9, 'ok': 3, 'unknown': 1, 'failed-disabled': 4, 'warning': 7, 'not-present': 2, 'error': 5, 'hot-spare': 8.
                                           memModuleBank 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.5 integer read-only
Memory module bank number (-1 if unknown); Not supported.
                                           memModuleCapacity 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.6 integer read-only
Memory module size (capacity in MBytes; -1 if unknown)
                                           memModuleStartAddress 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.7 integer read-only
Memory module start address (in MBytes; -1 if unknown); Not supported.
                                           memModuleForm 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.8 displaystring read-only
Memory module form (SIMM DIMM ...); Not supported.
                                           memModuleType 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.9 displaystring read-only
Memory module type (SDRAM DDRAM DDR2 DDR3 ...); Not supported.
                                           memModuleCorrErrors 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.10 counter read-only
Number of memory module correctable errors (-1 if unknown); Not supported.
                                           memModuleUncorrErrors 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.11 counter read-only
Number of memory module uncorrectable errors (-1 if unknown); Not supported.
                                           memModuleApproved 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.12 integer read-only
Memory module approved for this machine; Not supported. Enumeration: 'unknown': 1, 'yes': 3, 'no': 2.
                                           memModuleConfiguration 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.13 integer read-only
Memory module configuration; Not supported. unknown(1): Module configuration could not be evaluated normal(2): Module is in normal non-redundant configuration or slot is empty disabled(3): Module is disabled (manually through BIOS setup) hotSpare(4): Module is a hot-spare (standby) module; which will be used as a run-time-replacement for failed modules mirror(5): Module is part of a mirror configuration raid(6): Module is part of a RAID configuration notUsable(7): Module is not usable in the actual configuration because of architectural restrictions This object replaces the previous redundancy status values hot-spare and mirror in sc2memModuleStatus. Enumeration: 'raid': 6, 'notUsable': 7, 'normal': 2, 'unknown': 1, 'hotSpare': 4, 'disabled': 3, 'mirror': 5.
                                           memModuleFrequency 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.14 integer read-only
Memory module actual front side bus frequency (in MHz; -1 if unknown). This value is based on the BIOS settings; Not supported.
                                           memModuleMaxFrequency 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.15 integer read-only
Memory module maximum front side bus frequency (in MHz; -1 if unknown). This value is based on memory module SPD data; Not supported.
                                           memModuleVoltInterface 1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.16 displaystring read-only
Memory module interface voltage interface description; Not supported.
                                   cpuMultithreadEnable 1.3.6.1.4.1.211.1.31.1.1.1.6.6 integer read-only
Multithreading of CPU enabled; Not supported. Enumeration: 'disabled': 2, 'unknown': 1, 'enabled': 3.
                                   componentPowerConsumptionTable 1.3.6.1.4.1.211.1.31.1.1.1.6.7 no-access
Table of component power consumption data; Not supported.
                                       componentPowerConsumption 1.3.6.1.4.1.211.1.31.1.1.1.6.7.1 no-access
                                           cpcUnitId 1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.1 integer read-only
Unit identifier (index; 1..n); Not supported.
                                           cpcComponentClass 1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.2 integer read-write
Component class enumeration (based on IPMI v1.0 entity ID); Not supported. Enumeration: 'cooling-device': 29, 'cooling-unit': 30, 'chassis': 23, 'disk-bay': 26, 'processor-module': 9, 'sub-chassis': 24, 'memory-device': 32, 'disk': 4, 'processor': 3, 'memory-unit': 8.
                                           cpcComponentIndex 1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.3 integer read-only
Component index within class (1..n); Not supported.
                                           cpcDesignation 1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.4 displaystring read-only
Component designation; Not supported.
                                           cpcCurrentValue 1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.5 integer read-only
Current component power consumption in Watts; Not supported.
                                   trustedPlatformModuleTable 1.3.6.1.4.1.211.1.31.1.1.1.6.8 no-access
Trusted Platform Module (TPM) status information (see corresponding TPM specification for detailed description of these states)
                                       tpmUnitId 1.3.6.1.4.1.211.1.31.1.1.1.6.8.1 integer read-only
Unit identifier (index: 1..n)
                                       trustedPlatformModule 1.3.6.1.4.1.211.1.31.1.1.1.6.8.1 no-access
                                       tpmHardwareAvailable 1.3.6.1.4.1.211.1.31.1.1.1.6.8.2 truefalseunknown read-only
TPM hardware is available ('unknown' if hardware availability cannot be detected; no interface found)
                                       tpmBiosEnabled 1.3.6.1.4.1.211.1.31.1.1.1.6.8.3 truefalseunknown read-only
TPM hardware is enabled by BIOS ('unknown' if hardware is not available; a reboot is required to change this value)
                                       tpmEnabled 1.3.6.1.4.1.211.1.31.1.1.1.6.8.4 truefalseunknown read-only
TPM is enabled (by software; cannot take ownership if disabled; 'unknown' if hardware is not available or disabled)
                                       tpmActivated 1.3.6.1.4.1.211.1.31.1.1.1.6.8.5 truefalseunknown read-only
TPM is activated (by software; 'unknown' if hardware is not available or disabled)
                                       tpmOwnership 1.3.6.1.4.1.211.1.31.1.1.1.6.8.6 truefalseunknown read-only
TPM ownership is established (valid endorsement key is existing; 'unknown' if hardware is not available or disabled)
                               recovery 1.3.6.1.4.1.211.1.31.1.1.1.7
                                   messageLogTable 1.3.6.1.4.1.211.1.31.1.1.1.7.1 no-access
Error and event message handling; Not supported.
                                       messageLogs 1.3.6.1.4.1.211.1.31.1.1.1.7.1.1 no-access
                                           msgUnitId 1.3.6.1.4.1.211.1.31.1.1.1.7.1.1.1 integer read-only
Unit identifier (index: 1..n); Not supported..
                                           msgLogEntryNr 1.3.6.1.4.1.211.1.31.1.1.1.7.1.1.2 integer read-only
Message log entry number (index: 0..n); Not supported..
                                           msgLogEntryData 1.3.6.1.4.1.211.1.31.1.1.1.7.1.1.3 octet string read-only
Message log entry data (binary; one message per table entry); Not supported..
                                   watchdogTable 1.3.6.1.4.1.211.1.31.1.1.1.7.2 no-access
Watchdogs
                                       watchdogs 1.3.6.1.4.1.211.1.31.1.1.1.7.2.1 no-access
                                           wdUnitId 1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.1 integer read-only
Unit identifier (index: 1..n)
                                           watchdogType 1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.2 integer read-only
Watchdog type Enumeration: 'management-controller': 6, 'boot': 5, 'management-soft': 8, 'hardware': 2, 'bios': 4, 'other': 1, 'remote-management-controller': 7, 'software': 3.
                                           watchdogStatus 1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.3 integer read-only
Watchdog status Enumeration: 'not-available': 4, 'unknown': 1, 'enable': 3, 'disable': 2.
                                           watchdogEnable 1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.4 integer read-only
Enable/disable watchdog Enumeration: 'unknown': 1, 'enable': 3, 'disable': 2.
                                           watchdogTime 1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.5 integer read-only
Watchdog timeout period in seconds
                                           watchdogAction 1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.6 integer read-only
Watchdog timeout action Enumeration: 'hardware-reset': 7, 'unknown': 1, 'reboot': 3, 'power-down': 6, 'continue': 2, 'power-cycle': 5, 'nmi': 4.
                                   recoverySettingTable 1.3.6.1.4.1.211.1.31.1.1.1.7.3 no-access
ASR&R (Automatic server recovery and restart) settings; Not supported.
                                       recoverySettings 1.3.6.1.4.1.211.1.31.1.1.1.7.3.1 no-access
                                           asrUnitId 1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.1 integer read-only
Unit identifier (index: 1..n); Not supported.
                                           asrNrRebootRetries 1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.2 integer read-write
Current number of retries to reboot/restart the server when a failure shutdown (and power-off) had occurred. After this number of retries the action defined in 'sc2asrRebootFailAction' will be executed (-1 = unknown; no retries). The value unknown(1) cannot be set; a SET will deliver 'badValue'; Not supported.
                                           asrDefaultRebootRetries 1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.3 integer read-write
Default number of retries for server failure reboot. The previous object sc2asrNrRebootRetries will be set to this value after the server is working properly for a certain amount of time; Not supported.
                                           asrNextBootSource 1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.4 integer read-write
Source medium to boot from (next time): operating-system: boot from floppy or hard disk diag-system: boot from alternate diagnostic system (only for SCSI systems; load diagnostic system from alternate IDE disk). remote-disk: boot from remote network disk The value unknown(1) cannot be set; a SET will deliver 'badValue'; Not supported. Enumeration: 'unknown': 1, 'remote-disk': 5, 'reserved': 3, 'operating-system': 2, 'diag-system': 4.
                                           asrRebootFailAction 1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.5 integer read-write
Specifies the action after a specified number of failed reboot retries (the object 'sc2asrNrRebootRetries' has reached zero).The value no-diag-system(4) means that a diagnostic system is not available; no other value can be set. The values unknown(1) and reserved(3) cannot be set; a SET will deliver 'badValue'; Not supported. Enumeration: 'unknown': 1, 'switch-off': 2, 'boot-diag-system': 3, 'no-diag-system': 4.
                                           asrRestartDelay 1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.6 integer read-write
Delay (in minutes) when the system should be automatically switched on again (by real-time clock) after an error power-off. Setting this value to zero means immediate restart (power-cycle only). You can disable automatic restart by setting the 'sc2asrRebootFailAction' to 'switch-off' and the 'sc2asrDefaultRebootRetries' to zero; Not supported.
                                           asrPostErrorHalt 1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.7 integer read-write
Describes what to do when a POST error has occurred (halt on any error; no halt on any error...). The values unknown(1) and other(9) cannot be set; a SET will deliver 'badValue'; Not supported. Enumeration: 'halt-on-any-error': 2, 'unknown': 1, 'other': 4, 'no-halt-on-any-error': 3.
                                   messageTextLogTable 1.3.6.1.4.1.211.1.31.1.1.1.7.4 no-access
Error and event message handling; reported as text strings; Not supported.
                                       messageTextLogs 1.3.6.1.4.1.211.1.31.1.1.1.7.4.1 no-access
                                           msgTextLogUnitId 1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.1 integer read-only
Unit identifier (index: 1..n); Not supported.
                                           msgTextLogLanguage 1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.2 integer read-only
Message log entry language (index; Windows language code); Not supported. e.g. 1031; 1033 for German; English (default; always available)
                                           msgTextLogSeqNr 1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.3 integer read-only
Message log entry sequence number (index; 0..n); Not supported.
                                           msgTextLogTimestamp 1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.4 integer read-only
Message log entry time stamp (time_t = seconds since 1/1/1970; 0:00 AM); Not supported.
                                           msgTextLogMessage 1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.5 displaystring read-only
Message log entry message string (multi-byte string; multi-language; not every language may be implemented); Not supported.
                                           msgTextLogErrorCode 1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.6 integer read-only
Message log entry error code; Not supported.
                                           msgTextLogSeverity 1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.7 integer read-only
Message log entry severity; Not supported. Enumeration: 'major': 3, 'critical': 4, 'informational': 1, 'minor': 2.
                                           msgTextLogCSSComponent 1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.8 truefalse read-only
Component which caused the log message may be replaced by the customer (CSS=Customer Self Service); Not supported.
                                   messageLogActionHintTable 1.3.6.1.4.1.211.1.31.1.1.1.7.5 no-access
Action text strings for error and event messages; Not supported.
                                       messageLogActionHints 1.3.6.1.4.1.211.1.31.1.1.1.7.5.1 no-access
                                           mlaLanguage 1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.1 integer read-only
Action text language (index; Windows language code) e.g. 1031; 1033 for German; English; Not supported.
                                           mlaErrorCode 1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.2 integer read-only
Action text error code (index); Not supported.
                                           mlaType 1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.3 integer read-only
Message log entry severity; Not supported. Enumeration: 'resolution': 3, 'cause': 2, 'summary': 1.
                                           mlaIndex 1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.4 integer read-only
Action text entry string index (index; 1..n); Not supported.
                                           mlaMessage 1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.5 displaystring read-only
Action message string; Not supported.
                               status 1.3.6.1.4.1.211.1.31.1.1.1.8
                                   agentStatus 1.3.6.1.4.1.211.1.31.1.1.1.8.1 integer read-only
Overall status of all monitored components in this agent ok(1): all subsystems and components working properly; no failure degraded(2): at least one component has a problem; system may still work properly error(3): severe problem; system will not work properly failed(4): one or more managed components have failed unknown(5): none of the subsystems had a valid status (e.g. during initialization) Enumeration: 'failed': 4, 'degraded': 2, 'ok': 1, 'unknown': 5, 'error': 3.
                                   statusComponentTable 1.3.6.1.4.1.211.1.31.1.1.1.8.2 no-access
Table with status values of the components in this agent. The table summarizes all instances of one component to one status value.
                                       statusComponents 1.3.6.1.4.1.211.1.31.1.1.1.8.2.1 no-access
                                           csUnitId 1.3.6.1.4.1.211.1.31.1.1.1.8.2.1.1 integer read-only
Unit identifier (index: 1..n)
                                           csType 1.3.6.1.4.1.211.1.31.1.1.1.8.2.1.2 integer read-only
Component status type Enumeration: 'fan-redundancy': 10, 'power': 2, 'memory-modules': 8, 'power-supply-redundancy': 11, 'voltages': 6, 'cpus': 7, 'fans': 4, 'power-supplies': 5, 'temperatures': 3, 'system-boot': 1, 'total': 9.
                                           componentStatusValue 1.3.6.1.4.1.211.1.31.1.1.1.8.2.1.3 integer read-only
Component status value (for description of status values see previous object) Status mapping. SEL level MIB Value Warning degraded(2) Warning failed(4) Error error(5) Enumeration: 'failed': 4, 'degraded': 2, 'ok': 1, 'unknown': 5, 'error': 3.
                                   componentStatusSensorTable 1.3.6.1.4.1.211.1.31.1.1.1.8.3 no-access
This table contains the component status sensor table of the BMC (baseboard management controller). Additionally it also holds the CSS (Customer Self Service) information; Not supported.
                                       componentStatusSensors 1.3.6.1.4.1.211.1.31.1.1.1.8.3.1 no-access
                                           cssUnitId 1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.1 integer read-only
Unit identifier (index: 1..n); Not supported.
                                           cssSensorNumber 1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.2 integer read-only
BMC component status sensor number (index; 1..n); Not supported.
                                           cssSensorDesignation 1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.3 displaystring read-only
Component status sensor designation string; Not supported.
                                           cssSensorDevice 1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.4 displaystring read-only
Name of device (entity) the component status sensor belongs to; Not supported.
                                           cssSensorDeviceInstance 1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.5 integer read-only
Instance number of device (entity) the component status sensor belongs to; Not supported.
                                           cssSensorPhysicalLed 1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.6 truefalse read-only
If set; component has a physical status LED showing the sensor status; Not supported.
                                           cssSensorCssComponent 1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.7 truefalse read-only
If set; component may be replaced by the customer (CSS component); Not supported.
                                           cssSensorStatus 1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.8 integer read-only
Status returned by the component status sensor; Not supported. Enumeration: 'ok': 2, 'prefailure-warning': 4, 'unknown': 1, 'failure': 5, 'identify': 3, 'not-present': 6.
                                           cssComponentServicePartId 1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.9 displaystring read-only
Spare part number of the replaceable component; used to create a link to the spare part list on the service's spare part catalogue. This usually is the component's designation string; with blanks substituted by underscores; Not supported.
                                   cssTableSize 1.3.6.1.4.1.211.1.31.1.1.1.8.4 integer read-only
Number of entries in the component status sensor table; Not supported.
                               maintenance 1.3.6.1.4.1.211.1.31.1.1.1.9
                                   maintenanceObjectTable 1.3.6.1.4.1.211.1.31.1.1.1.9.1 no-access
Table containing some other maintenance objects.
                                       maintenanceObjects 1.3.6.1.4.1.211.1.31.1.1.1.9.1.1 no-access
                                           mtUnitId 1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.1 integer read-only
Unit identifier (index: 1..n).
                                           errorCounterStartTime 1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.2 integer read-only
Memory module error counter start time (seconds since 1/1/1970; -1 if unknown). This is the time when the error counters were started or reset last time; Not supported.
                                           sendTestTrap 1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.3 integer read-write
Send a test trap (test alarm) to the manager application(s) to test connection and trap configuration; trap cannot be disabled. Initiate test trap sending by writing a non-zero value. Reading this object just returns the value 0; Not supported.
                                           addTrapDestination 1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.4 ipaddress read-write
Add the specified IP address (of the management station) to the trap destination list of this server. That client will become an alarm receiver for traps of this server; Not supported.
                                           mtMaintenanceStatus 1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.5 integer read-only
maitenance status Enumeration: 'on': 2, 'off': 1.
                                   firmwareVersionTable 1.3.6.1.4.1.211.1.31.1.1.1.9.2 no-access
Controller firmware version table
                                       firmwareVersions 1.3.6.1.4.1.211.1.31.1.1.1.9.2.1 no-access
                                           fwUnitId 1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.1 integer read-only
Unit identifier (index: 1..n)
                                           fwType 1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.2 integer read-only
Controller/firmware type Enumeration: 'baseboard-management-controller': 7, 'efi': 6, 'gswb-offline0': 8, 'management-controller': 2, 'bios': 1, 'sal': 5, 'gswb-online1': 11, 'gswb-online0': 10, 'total': 20, 'pal': 4, 'gswb-offline1': 9, 'remote-management-controller': 3.
                                           fwModelName 1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.3 displaystring read-only
Controller/firmware model name (e.g. 'Copernicus'...) TOTAL' shows all firmware version in system (including BIOS; BMC; MMB).
                                           fwVersion 1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.4 displaystring read-only
Controller/firmware version string (e.g. '3.81.02')
                                           fwLocation 1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.5 integer read-only
BMM physical number of controller/firmware on IOU.
                               deployment 1.3.6.1.4.1.211.1.31.1.1.1.10
                                     deployInfoTable 1.3.6.1.4.1.211.1.31.1.1.1.10.1 no-access
Table with data of deployment information; Not supported.
                                         deployInfo 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1 no-access
                                             dplInfoUnitId 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.1 integer read-only
Unit identifier (index: 1..n); Not supported.
                                             deployInfoChassisId 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.2 displaystring read-only
Chassis serial number; Not supported.
                                             deployInfoMacAddr1 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.3 physaddress read-only
MAC address 1; Not supported.
                                             deployInfoMacAddr2 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.4 physaddress read-only
MAC address 2; Not supported.
                                             deployInfoMacAddr3 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.5 physaddress read-only
MAC address 3; Not supported.
                                             deployInfoMacAddr4 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.6 physaddress read-only
MAC address 4; Not supported.
                                             deployInfoIpAddr1 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.7 ipaddress read-write
IP address 1; Not supported.
                                             deployInfoIpAddr2 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.8 ipaddress read-write
IP address 2; Not supported.
                                             deployInfoIpAddr3 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.9 ipaddress read-write
IP address 3; Not supported.
                                             deployInfoIpAddr4 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.10 ipaddress read-write
IP address 4; Not supported.
                                             deployInfoNetMask1 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.11 ipaddress read-write
IP subnet mask 1; Not supported.
                                             deployInfoNetMask2 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.12 ipaddress read-write
IP subnet mask 2; Not supported.
                                             deployInfoNetMask3 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.13 ipaddress read-write
IP subnet mask 3; Not supported.
                                             deployInfoNetMask4 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.14 ipaddress read-write
IP subnet mask 4; Not supported.
                                             deployInfoGateway1 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.15 ipaddress read-write
IP gateway 1; Not supported.
                                             deployInfoGateway2 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.16 ipaddress read-write
IP gateway 2; Not supported.
                                             deployInfoGateway3 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.17 ipaddress read-write
IP gateway 3; Not supported.
                                             deployInfoGateway4 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.18 ipaddress read-write
IP gateway 4; Not supported.
                                             deployInfoHostname 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.19 displaystring read-write
Host name; Not supported.
                                             deployInfoMasterImageReference 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.20 displaystring read-write
URL in UNC notification (but in ASCII) to remote image file (with the extensions of *.img; *.cfg; *.txt); Not supported.
                                             deployInfoStatusOfBlade 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.21 integer read-write
Status of this server: power-down(2): waiting for boot standby(3): power management mode system-boot-failure(4): system boot failure bios-setup(5): BIOS setup or boot phase booting(6): ACPI OS currently booting ; Not supported. Enumeration: 'standby': 3, 'unknown': 1, 'system-boot-failure': 4, 'power-down': 2, 'booting': 6, 'bios-setup': 5.
                                             deployInfoLanStatusOfSlot 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.22 integer read-write
Defines whether the IP-LAN definitions are valid or not; Not supported. Enumeration: 'true': 3, 'unknown': 1, 'false': 2.
                                             deployInfoAutomaticRecovery 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.23 integer read-write
Defines if this server blade should be provided automatic recovery; Not supported. Enumeration: 'true': 3, 'unknown': 1, 'false': 2.
                                             deployInfoStatusOfCloning 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.24 integer read-write
Status of current cloning process; Not supported. Enumeration: 'unknown': 1, 'cloned': 4, 'cloning': 3, 'not-cloned': 2.
                                             deployInfoBootMode 1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.25 integer read-write
Boot mode of the server for remote deployment: normal(2): boot from standard disk subsystem pxeBiosSetup(3): boot from PXE according to BIOS setup settings (for OEM systems) pxeLanx(y): boot from PXE LAN interface x (0..3) ; Not supported. Enumeration: 'normal': 2, 'unknown': 1, 'pxeLan1': 5, 'pxeLan0': 4, 'pxeLan3': 7, 'pxeLan2': 6, 'pxeBiosSetup': 3.
                                     oemDeployInfoTable 1.3.6.1.4.1.211.1.31.1.1.1.10.2 no-access
Table with data of server OEM information; Not supported.
                                         oemDeployInfo 1.3.6.1.4.1.211.1.31.1.1.1.10.2.1 no-access
                                             odplInfoUnitId 1.3.6.1.4.1.211.1.31.1.1.1.10.2.1.1 integer read-only
Unit identifier (index: 1..n); Not supported.
                                             odplParamId 1.3.6.1.4.1.211.1.31.1.1.1.10.2.1.2 integer read-only
OEM parameter ID (index: 1..10); Not supported.
                                             oemDeployInfoParamData 1.3.6.1.4.1.211.1.31.1.1.1.10.2.1.3 displaystring read-write
OEM parameter data; Not supported.
                                     deployLanInterfaceTable 1.3.6.1.4.1.211.1.31.1.1.1.10.3 no-access
Table with system LAN interfaces information: This table lists all real LAN interfaces in same physical order as the BIOS uses it for PXE boot. Only on-board interfaces are listed; no virtual interfaces.
                                         deployLanInterfaces 1.3.6.1.4.1.211.1.31.1.1.1.10.3.1 no-access
                                             dplLanUnitId 1.3.6.1.4.1.211.1.31.1.1.1.10.3.1.1 integer read-only
Unit identifier (index; 1..n)
                                             dplLanInterfaceNr 1.3.6.1.4.1.211.1.31.1.1.1.10.3.1.2 integer read-only
LAN interface number (index; 0..n)
                                             dplLanMacAddress 1.3.6.1.4.1.211.1.31.1.1.1.10.3.1.3 physaddress read-only
LAN interface hardware (MAC) address; ff:ff:ff:ff:ff:ff if value not available
                       partition 1.3.6.1.4.1.211.1.31.1.2