MITEL-PPPGROUP-MIB: View SNMP OID List / Download MIB

VENDOR: MITEL, CORP.


 Home MIB: MITEL-PPPGROUP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mitel 1.3.6.1.4.1.1027
           mitelProprietary 1.3.6.1.4.1.1027.4
               mitelPropIpNetworking 1.3.6.1.4.1.1027.4.8
                   mitelIpNetRouter 1.3.6.1.4.1.1027.4.8.1
                       mitelRouterPppGroup 1.3.6.1.4.1.1027.4.8.1.2
The MITEL PPP MIB module.
                           mitelPppGrpGlobalGroup 1.3.6.1.4.1.1027.4.8.1.2.1
                               mitelGblGrpNegotiateFirst 1.3.6.1.4.1.1027.4.8.1.2.1.1 integer read-write
This attribute defines which PPP authentication protocol is negotiated first on incoming call. DEFAULT = chap Enumeration: 'pap': 2, 'chap': 1, 'mschap': 3.
                               mitelGblGrpDynamicIpAddr 1.3.6.1.4.1.1027.4.8.1.2.1.2 ipaddress read-write
This attribute defines the start address of the dynamic addres pool.
                               mitelGblGrpNumDynamicIpAddr 1.3.6.1.4.1.1027.4.8.1.2.1.3 integer read-write
This attribute defines the number of dynamic IP addresses in the pool.
                               mitelGblGrpDynamicIpAdrrHoldoff 1.3.6.1.4.1.1027.4.8.1.2.1.4 integer read-write
This attribute defines the time in seconds before the same IP address can be reused after a call has been disconnected.
                               mitelGblGrpRemDnsIpAddrHandling 1.3.6.1.4.1.1027.4.8.1.2.1.5 integer read-write
This attribute determines wether the system can accept or override the DNS IP address submitted by a remote system. DEFAULT = accept. Override has been superceded by overridewith. Enumeration: 'override': 2, 'overridewith': 3, 'accept': 1.
                               mitelGblGrpPrimaryWinsServerIpAddr 1.3.6.1.4.1.1027.4.8.1.2.1.6 ipaddress read-write
This attribute defines the Primary WINS server IP address of your Network.
                               mitelGblGrpSecondaryWinsServerIpAddr 1.3.6.1.4.1.1027.4.8.1.2.1.7 ipaddress read-write
This attribute defines the Secondary WINS server IP address of your Network.
                           mitelPppGrpRemoteConfigTable 1.3.6.1.4.1.1027.4.8.1.2.2 no-access
This table contains objects that pertain to the management of remote LANs that use the PPP Internet standard link protocol.
                               mitelPppGrpRemoteConfigEntry 1.3.6.1.4.1.1027.4.8.1.2.2.1 no-access
A default entry at conceptual row zero does exist in this table. The default entry can be used to specify the PPP authentication protocol only.
                                   mitelRmtCfgTableIndex 1.3.6.1.4.1.1027.4.8.1.2.2.1.1 integer32 read-only
This object uniquely identifies this object
                                   mitelRmtCfgTableIpAddrHandling 1.3.6.1.4.1.1027.4.8.1.2.2.1.2 integer read-write
This attribute determines wether the system can accept or override the DNS IP address submitted by a remote system. DEFAULT = accept. Enumeration: 'override': 2, 'assign': 3, 'accept': 1.
                                   mitelRmtCfgTableRemIpAddr 1.3.6.1.4.1.1027.4.8.1.2.2.1.3 ipaddress read-write
The IP address to assign to remote if mitelRmtCfgTableIPAddrHandling is set to assign(3)
                                   mitelRmtCfgTableStatus 1.3.6.1.4.1.1027.4.8.1.2.2.1.4 rowstatus read-only
The current status of this entry.
                                   mitelRmtCfgTablePppMode 1.3.6.1.4.1.1027.4.8.1.2.2.1.5 integer read-write
The mode PPP will be using for the given destination. Enumeration: 'client': 1, 'server': 2.
                           mitelPppGrpPppOverEthernetTable 1.3.6.1.4.1.1027.4.8.1.2.3 no-access
Table containing the configuration items needed by the PPPoE stack.
                               mitelPppGrpPppOverEthernetEntry 1.3.6.1.4.1.1027.4.8.1.2.3.1 no-access
PPPoE information
                                   mitelPppOEthTableIndex 1.3.6.1.4.1.1027.4.8.1.2.3.1.1 integer32 read-write
Unique Identifier for an entry in PPP over Ethernet Table.
                                   mitelPppOEthTableEnabled 1.3.6.1.4.1.1027.4.8.1.2.3.1.2 integer read-write
Is this PPPoE instance enabled or not. Enumeration: 'disabled': 0, 'enabled': 1.
                                   mitelPppOEthTablePacketTimeout 1.3.6.1.4.1.1027.4.8.1.2.3.1.3 integer read-write
The time to wait, in seconds, for a valid response to a discovery packet before resending it. Warning: this value is doubled ever time a packet is resent.
                                   mitelPppOEthTablePacketRetries 1.3.6.1.4.1.1027.4.8.1.2.3.1.4 integer read-write
The number of times to resend discovery packets before giving up on the negotiation.
                                   mitelPppOEthTableTotalRetries 1.3.6.1.4.1.1027.4.8.1.2.3.1.5 integer read-write
The RFC states that failure to receive a valid PADS packet should restart the negotiation. This count stops the system retrying indefinitely on duff PADS packets by capping the total number of retry attempts.
                                   mitelPppOEthTableServiceName 1.3.6.1.4.1.1027.4.8.1.2.3.1.6 octet string read-write
The service we wish to request from the remote access concentrator. Examples of the use of the service name are to indicate an ISP or a class or quality of service. An empty string indicates any service.
                                   mitelPppOEthTableACName 1.3.6.1.4.1.1027.4.8.1.2.3.1.7 octet string read-write
Description of the remote access concentrator we wish to connect to. An empty string indicates no preference.
                                   mitelPppOEthTableStatus 1.3.6.1.4.1.1027.4.8.1.2.3.1.8 rowstatus read-only
The entry's row status.