MIP-UDPTUNNEL-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: MIP-UDPTUNNEL-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, MIP-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mipUdpTunnelMIB 1.3.6.1.2.1.44.4
The MIB module for configuring and displaying Mobile IP Traversal of Network Address Translation (NAT) Devices information. Copyright (C) IETF Trust (2007). This version of this MIB module is part of RFC yyyy; see the RFC itself for full legal notices.
     mipUdpTunnelMIBObjects 1.3.6.1.2.1.44.4.1
         mnUdpTunnel 1.3.6.1.2.1.44.4.1.1
             mnUdpTunnelEnable 1.3.6.1.2.1.44.4.1.1.1 truthvalue read-write
This parameter enables and disables the RFC 3519 UDP tunneling function in the MN completely.
             mnUdpTunnelForce 1.3.6.1.2.1.44.4.1.1.2 truthvalue read-write
This parameter enables (or disables) the MN to set the F (force) flag. It indicates that the mobile node wants to use traversal regardless of the outcome of NAT detection performed by the home agent.
             mnUdpTunnelKeepaliveInterval 1.3.6.1.2.1.44.4.1.1.3 unsigned32 read-write
Defines the default NAT keepalive interval that the mobile node will use in the case that the HA does not impose another value by setting the Keepalive Interval in the UDP Tunnel Reply Extension.
         haUdpTunnel 1.3.6.1.2.1.44.4.1.2
             haUdpTunnelEnable 1.3.6.1.2.1.44.4.1.2.1 truthvalue read-write
This parameter enables and disables the RFC 3519 UDP tunneling function in the HA completely.
             haUdpTunnelKeepaliveInterval 1.3.6.1.2.1.44.4.1.2.2 unsigned32 read-write
This parameter sets the keepalive interval override. Normally, the MN uses the keepalive time that was configured using UDP tunneling and sending keepalive messages. The HA can override this configured keepalive time by setting a new interval value for this parameter to a value other than zero.
             haUdpTunnelForce 1.3.6.1.2.1.44.4.1.2.3 truthvalue read-write
This parameter enables and disables the HA forcing all connections from MNs which support RFC 3519 UDP tunneling to use tunneling whether or not the presence of a NAT is detected.
             haUdpTunnelEncapUnavail 1.3.6.1.2.1.44.4.1.2.4 counter32 read-only
Total number of Registration Requests denied by the home agent -- Requested UDP tunnel encapsulation unavailable (code 142).
         faUdpTunnel 1.3.6.1.2.1.44.4.1.3
             faUdpTunnelEnable 1.3.6.1.2.1.44.4.1.3.1 truthvalue read-write
This parameter enables and disables the RFC 3519 UDP tunneling function in the FA completely.
             faUdpTunnelForce 1.3.6.1.2.1.44.4.1.3.2 truthvalue read-write
This parameter enables (or disables) the FA to set the F (force) flag. It indicates that the foreign agent wants to use traversal regardless of the outcome of NAT detection performed by the home agent.
             faUdpTunnelKeepaliveInterval 1.3.6.1.2.1.44.4.1.3.3 unsigned32 read-write
Defines the default NAT keepalive interval that the foreign agent will use in the case that the HA does not impose another value by setting the Keepalive Interval in the UDP Tunnel Reply Extension.
     mipUdpTunnelConformance 1.3.6.1.2.1.44.4.2
         mipUdpTunnelGroups 1.3.6.1.2.1.44.4.2.1
             mnUdpTunnelGroup 1.3.6.1.2.1.44.4.2.1.1
A collection of objects providing management information for theuse of UDP tunneling according to RFC3519 within a mobile node.
             haUdpTunnelGroup 1.3.6.1.2.1.44.4.2.1.2
A collection of objects providing management information for theuse of UDP tunneling according to RFC3519 within a home agent.
             faUdpTunnelGroup 1.3.6.1.2.1.44.4.2.1.3
A collection of objects providing management information for theuse of UDP tunneling according to RFC3519 within a foreign agent.
         mipUdpTunnelCompliances 1.3.6.1.2.1.44.4.2.2
             mipUdpTunnelCompliance 1.3.6.1.2.1.44.4.2.2.1
The compliance statement for SNMPv2 entities which implement the Mobile IP UDP Tunnel MIB.