MICOM-NAS-MIB: View SNMP OID List / Download MIB

VENDOR: MICOM COMMUNICATION CORPORATION


 Home MIB: MICOM-NAS-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 micom_nas 1.3.6.1.4.1.335.1.4.16
       nasBase 1.3.6.1.4.1.335.1.4.16.1
           nasOSCARHelloTime 1.3.6.1.4.1.335.1.4.16.1.1 integer read-write
NAME = ServerAgeingTime; DESC = The Server age time for ageing the registered \ MPA entries.; HELP = If the server does not receive \ a HELLO packet from the MPA within this time \ the MPA's registered numbers will be removed. \ This accounts for MPAs coming up and going down. \ The value should be a multiple \ of the MPA's HelloTime. Recommended value \ is atleast twice of that of the MPA's \ HelloTime. This parameter is stored \ in permanent storage whose copy is \ accessible thru the MIB object \ nasNvOSCARHelloTime.; CAPABILITIES = NET_CFG, VPN_NONE;
           nasOSCARCntrZero 1.3.6.1.4.1.335.1.4.16.1.2 integer read-write
NAME = ServerCounterReset; DESC = This object was obsoleted as of release \ 3.0; and is included here only to support \ backwards compatibility for software \ versions prior to release 3.0. \ Facility to zero the statistical counters \ of this NAS.; HELP = Setting this parameter to reset will \ zero out the counters from the NAS \ Stat Group. This is useful when collecting \ statistics over a period of time for analysis; CAPABILITIES = NET_CFG, VPN_NONE; Enumeration: 'reset': 1.
           nasOSCARTableSize 1.3.6.1.4.1.335.1.4.16.1.3 counter read-only
NAME = NumofRegisteredMPAs; DESC = Aggregrate of MPAs (belonging to all customers) \ that are currently registered with this server; HELP = A zero value would either mean \ that no MPAs are currently active \ or are reachable by this server, or this \ server is not known to the MPAs; CAPABILITIES = NET_CFG, VPN_NONE;
           nasDNDNAdbSize 1.3.6.1.4.1.335.1.4.16.1.4 counter read-only
NAME = NumofRegisteredDNs; DESC = Aggregrate of DNs (belonging to all customers) \ that are currently registered with this server. HELP = A zero value would either mean \ that no MPAs are currently active \ or are reachable by this server, or this \ server is not known to the MPAs; CAPABILITIES = NET_CFG, VPN_NONE;
       nasStat 1.3.6.1.4.1.335.1.4.16.2
           nasInDNARequests 1.3.6.1.4.1.335.1.4.16.2.1 counter read-only
NAME = AddressMappingRequestRecvd; DESC = Aggregrate of Address Mapping requests \ received by this server from MPAs \ belonging to all customers served by this NAS; HELP = Number of DN-DNA mappings requested \ by this NAS.; CAPABILITIES = NET_CFG, VPN_NONE;
           nasInDNAResolveds 1.3.6.1.4.1.335.1.4.16.2.2 counter read-only
NAME = AddressMappingsResolved; DESC = Number of DN-DNA mappings resolved by \ this NAS.; HELP = Number of DN-DNA mappings resolved by \ this NAS. This includes requests from \ MPAs belonging to all the Customers \ serviced by this Network Address Server.; CAPABILITIES = NET_CFG, VPN_NONE;
           nasInDNAUnResolveds 1.3.6.1.4.1.335.1.4.16.2.3 counter read-only
NAME = AddressMappingRequestFails; DESC = Aggregrate of address mapping requests this \ server was unable to resolve.; HELP = Includes all customers serviced by this server. \ A very high value could indicate call attempts \ to a telephone serviced by a down or \ unreachable MPA; CAPABILITIES = NET_CFG, VPN_NONE;
           nasInNACHellos 1.3.6.1.4.1.335.1.4.16.2.4 counter read-only
NAME = HellosRecvd; DESC = Aggregrate of HELLO messages received from \ all MPAs belonging to all customers that \ are serviced by this NAS; HELP = Includes Hellos from MPAs \ belonging to all the Customers \ serviced by this Network Address Server.; CAPABILITIES = NET_CFG, VPN_NONE;
           nasInRegisters 1.3.6.1.4.1.335.1.4.16.2.5 counter read-only
NAME = RegisterMessageRcvd; DESC = Aggregrate of Register messages received \ by this server from MPAs belonging to all\ customers serviced by this NAS ; HELP = If this value is greater than NumofRegisterdMPAs \ it would indicate that a few MPAs have had to \ re-register. A MPA may have to re-register if \ this server aged out it's registered entries \ or if the MPA had a configuration change or \ a MPA has rebooted; CAPABILITIES = NET_CFG, VPN_NONE;
           nasInUnknowns 1.3.6.1.4.1.335.1.4.16.2.6 counter read-only
NAME = UnknownMessagesReceived; DESC = Number of Unknown messages received \ by this server.; HELP = This includes messages \ from MPAs belonging to all the Customers \ serviced by this Network Address Server. \ This value should be zero. A non-zero \ value would indicate a different \ application sharing the same UDP port; CAPABILITIES = NET_CFG, VPN_NONE;
           nasOSCARRegSuccess 1.3.6.1.4.1.335.1.4.16.2.7 counter read-only
NAME = SuccessfulRegistrations; DESC = Number of Register packets successfully \ serviced by this server.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE;
           nasOSCARRegFails 1.3.6.1.4.1.335.1.4.16.2.8 counter read-only
NAME = RegistrationFails; DESC = Number of MPA registration attempts failed \ by this server; HELP = The server may fail an registration atttempt \ for the following reasons : \ the received packet was incorrect or \ the server ran out of memory; CAPABILITIES = NET_CFG, VPN_NONE;
           nasOSCARTimedOuts 1.3.6.1.4.1.335.1.4.16.2.9 counter read-only
NAME = NumOfMPAsTimedOut; DESC = Number of MPAs aged out from the database \ as HELLO messages were not received in time; HELP = A very high number could be a due to : \ IP network congestion or failure and hence \ HELLO messages are not reaching this server, or \ The MPAs have gone out of service; CAPABILITIES = NET_CFG, VPN_NONE;
           nasOutNASHellos 1.3.6.1.4.1.335.1.4.16.2.10 counter read-only
NAME = NumOfNASHellosSent; DESC = Number of NAS Hello Messages sent out \ by this NAS.; HELP = These messages are sent \ if solicited by the MPA. The MPA solicits \ a HELLO message from the server in \ an attempt to re-establish communication; CAPABILITIES = NET_CFG, VPN_NONE;
           nasOutRegisterRequests 1.3.6.1.4.1.335.1.4.16.2.11 counter read-only
NAME = ; DESC = Number of NAS Register-Request Messages \ sent out by this NAS.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE;
       nasOscar 1.3.6.1.4.1.335.1.4.16.3
           nasOSCARTable 1.3.6.1.4.1.335.1.4.16.3.1 no-access
NAME = ; DESC = The NAS MPA table listing; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE;
               nasOSCAREntry 1.3.6.1.4.1.335.1.4.16.3.1.1 no-access
NAME = ; DESC = Each entry corresponds to one MPA \ registered with the system.; HELP = ; CAPABILITIES = ;
                   nasOSCARCustomerId 1.3.6.1.4.1.335.1.4.16.3.1.1.1 integer read-only
NAME = ; DESC = The unique identifier of the customer \ network. This is one of the indicies \ to a row in this table.; HELP = This is one of the indicies \ to a row in this table.; CAPABILITIES = ;
                   nasOSCARDNADigits 1.3.6.1.4.1.335.1.4.16.3.1.1.2 displaystring read-only
NAME = ; DESC = The DNA digits in ASCII format which \ uniquely identify the row in the table.; HELP = Every MPA an unique DNA number \ assigned to it.; CAPABILITIES = ;
                   nasOSCARState 1.3.6.1.4.1.335.1.4.16.3.1.1.3 integer read-only
NAME = ; DESC = The validity of this entry in the MPA \ table.; HELP = ; CAPABILITIES = ; Enumeration: 'valid': 1, 'invalid': 2.
                   nasOSCARIpAddr 1.3.6.1.4.1.335.1.4.16.3.1.1.4 ipaddress read-only
NAME = ; DESC = The network address used by the MPA \ to communicate with this NAS.; HELP = ; CAPABILITIES = ;
                   nasOSCARSuppDns 1.3.6.1.4.1.335.1.4.16.3.1.1.5 counter read-only
NAME = ; DESC = The number of DN entries supported by \ this MPA. This is the size of the \ MPA's Egress Table.; HELP = ; CAPABILITIES = ;
       nasDn 1.3.6.1.4.1.335.1.4.16.4
           nasDNTable 1.3.6.1.4.1.335.1.4.16.4.1 no-access
NAME = ; DESC = The NAS DN Table.; HELP = ; CAPABILITIES = NET_CFG, VPN_NONE;
               nasDNEntry 1.3.6.1.4.1.335.1.4.16.4.1.1 no-access
NAME = ; DESC = Each entry corresponds to one DN registered \ with the system.; HELP = ; CAPABILITIES = ;
                   nasDNCustomerId 1.3.6.1.4.1.335.1.4.16.4.1.1.1 integer read-only
NAME = ; DESC = The unique identifier of the customer \ network.; HELP = This is one of the indicies \ to a row in this table.; CAPABILITIES = ;
                   nasDNDigits 1.3.6.1.4.1.335.1.4.16.4.1.1.2 displaystring read-only
NAME = ; DESC = The DN digits in ASCII format which \ uniquely identify the row in the table. \ For software releases prior to 3.0, the \ string range was restricted to (SIZE(1..24)).; HELP = Every Egress Entry has an unique DN \ number assigned to the channel.; CAPABILITIES = ;
                   nasDNDNADigits 1.3.6.1.4.1.335.1.4.16.4.1.1.3 displaystring read-only
NAME = ; DESC = The DNA digits in ASCII format which \ uniquely identify the MPA which \ supports this DN.; HELP = Every MPA has a \ unique DNA number assigned to it.; CAPABILITIES = ;
                   nasDNState 1.3.6.1.4.1.335.1.4.16.4.1.1.4 integer read-only
NAME = ; DESC = The validity of this entry in the DN \ table.; HELP = ; CAPABILITIES = ; Enumeration: 'valid': 1, 'invalid': 2.
       nasNvParam 1.3.6.1.4.1.335.1.4.16.5
           nasNvOSCARHelloTime 1.3.6.1.4.1.335.1.4.16.5.1 integer read-only
NAME = ; DESC = The NAS Ageing time for ageing the registered \ MPA entries.; HELP = This should be a multiple \ of the NAC HelloTime. Recommended value \ is atleast twice of that of the NAC \ HelloTime. This parameter is stored \ in permanent storage. The operating \ value is accessible thru the MIB object \ nasOSCARHelloTime.; CAPABILITIES = NET_CFG, VPN_NONE;