ME1200-QOS-MIB: View SNMP OID List / Download MIB
VENDOR: CISCO
| Home | MIB: ME1200-QOS-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| me1200QosMIB | 1.3.6.1.4.1.9.9.815.1.14 |
This is a private MIB for QoS |
||
| me1200QosMIBObjects | 1.3.6.1.4.1.9.9.815.1.14.1 | |||
| me1200QosConfig | 1.3.6.1.4.1.9.9.815.1.14.1.2 | |||
| me1200QosGlobals | 1.3.6.1.4.1.9.9.815.1.14.1.2.1 | |||
| me1200QosStormPolicers | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1 | |||
| me1200QosStormPolicerUnicast | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.1 | |||
| me1200QosStormPolicerUnicastEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.1.1 | truthvalue | read-write |
If true, the storm policer is enabled. |
| me1200QosStormPolicerUnicastRate | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.1.2 | unsigned32 | read-write |
Configure the storm policer rate in frames/second. Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000, 256000, 512000, 1024000 |
| me1200QosStormPolicerMulticast | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.2 | |||
| me1200QosStormPolicerMulticastEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.2.1 | truthvalue | read-write |
If true, the storm policer is enabled. |
| me1200QosStormPolicerMulticastRate | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.2.2 | unsigned32 | read-write |
Configure the storm policer rate in frames/second. Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000, 256000, 512000, 1024000 |
| me1200QosStormPolicerBroadcast | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.3 | |||
| me1200QosStormPolicerBroadcastEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.3.1 | truthvalue | read-write |
If true, the storm policer is enabled. |
| me1200QosStormPolicerBroadcastRate | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.1.3.2 | unsigned32 | read-write |
Configure the storm policer rate in frames/second. Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1000, 2000, 4000, 8000, 16000, 32000, 64000, 128000, 256000, 512000, 1024000 |
| me1200QosWredTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2 | no-access |
This table contains the configuration of WRED for queue 0 through 5 |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1 | no-access |
Each row contains the configuration for a specific queue |
||
| me1200QosWredQueue | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.1 | integer32 | no-access |
Queue index. |
| me1200QosWredEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.2 | truthvalue | read-write |
If true, RED is enabled for this queue |
| me1200QosWredMinimumFillLevel | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.3 | me1200percent | read-write |
Controls the lower RED fill level threshold in percent of the whole queue. If the queue filling level is below this threshold, the drop probability is zero. Valid range is 0-100 |
| me1200QosWredMaximum | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.4 | me1200percent | read-write |
Controls the upper RED drop probability or fill level threshold for frames marked with Drop Precedence Level 1 (yellow frames). Valid range is 1-100 |
| me1200QosWredMaxSelector | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.2.1.5 | me1200maxselector | read-write |
Selects whether 'Maximum' controls 'Maximum Drop Probability' or 'Maximum Fill Level'. |
| me1200QosDscpTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3 | no-access |
This table has 64 entries, one for each DSCP value |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1 | no-access |
Each row contains the configuration for a specific DSCP |
||
| me1200QosDscpDscp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.1 | dscp | no-access |
DSCP index. |
| me1200QosDscpTrust | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.2 | truthvalue | read-write |
If true, this DSCP value is trusted. Packets arriving on interfaces where 'TrustDscp' is enabled will be classified to the corresponding CoS and DPL in this table. |
| me1200QosDscpCos | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.3 | unsigned32 | read-write |
The CoS value which the DSCP value maps to. Valid range is 0-7. |
| me1200QosDscpDpl | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.4 | me1200unsigned8 | read-write |
The DPL (Drop Precedence Level) which the DSCP value maps to. Valid range is 0-1. |
| me1200QosDscpIngressTranslation | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.5 | dscp | read-write |
The new classified DSCP value which the original DSCP value is replaced with if 'DscpTranslate' is enabled on the interface |
| me1200QosDscpClassify | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.6 | truthvalue | read-write |
If true, then packets received on interfaces where 'DscpClassify' is set to 'selected' will be classified to a new DSCP value based on the classified CoS and DPL value configured in the qosCosDscpTable. |
| me1200QosDscpEgressTranslation | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.7 | dscp | read-write |
The new DSCP value that will be written into the packet at egress if 'DscpRemark' on the interface is set to 'remap' or 'remap-dp'. If 'remap-dp' is set then only packets classified to Dpl 0 will use this table. |
| me1200QosDscpEgressTranslationDp1 | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.3.1.8 | dscp | read-write |
The new DSCP value that will be written into the packet at egress if 'DscpRemark' on the interface is set to 'remap-dp'. Only packets classified to Dpl 1 will use this table. |
| me1200QosCosToDscpTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.4 | no-access |
This table has QOS_CLASS_CNT entries, one for each Cos value |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1 | no-access |
Each row contains the configuration for a specific Cos |
||
| me1200QosCosToDscpCos | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.1 | integer32 | no-access |
CoS index. |
| me1200QosCosToDscpDscp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.2 | dscp | read-write |
The DSCP value which the classified CoS value maps to when the classified DPL is 0. |
| me1200QosCosToDscpDscpDp1 | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.4.1.3 | dscp | read-write |
The DSCP value which the classified CoS value maps to when the classified DPL is 1. |
| me1200QosQce | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10 | |||
| me1200QosQceTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1 | no-access |
This table contains the configuration of QCEs. The index is QceId. |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1 | no-access |
Each row contains the configuration of a single QCE. |
||
| me1200QosQceQceId | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1 | integer32 | no-access |
QCE Id index. |
| me1200QosQceNextQceId | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.2 | unsigned32 | read-write |
QCE Id of the next QCE. |
| me1200QosQcePortList | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.4 | me1200portlist | read-write |
List of ports that are member of this QCE. |
| me1200QosQceDestMacType | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.5 | me1200destmactype | read-write |
Indicates the destination MAC type to match. |
| me1200QosQceDestMac | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.6 | macaddress | read-write |
Indicates the 48 bits destination MAC address. The packets destination address is AND-ed with the value of DestMacMask and then compared against the value of this object. If this object value and the value of DestMacMask is 00-00-00-00-00-00, this entry matches any destination MAC address. This object can only be configured if DestMacType is any(0) and DestMacMask is ff-ff-ff-ff-ff-ff. |
| me1200QosQceDestMacMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.7 | macaddress | read-write |
Indicates the 48 bits destination MAC address mask.Valid values are 00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff. |
| me1200QosQceSrcMac | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.8 | macaddress | read-write |
Indicates the 48 bits source MAC address. The packets source address is AND-ed with the value of SrcMacMask and then compared against the value of this object. If this object value and the value of SrcMacMask is 00-00-00-00-00-00, this entry matches any source MAC address. This object can only be configured if SrcMacMask is ff-ff-ff-ff-ff-ff. |
| me1200QosQceSrcMacMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.9 | macaddress | read-write |
Indicates the 48 bits source MAC address mask. Valid values are 00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff. |
| me1200QosQceVlanTagType | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.10 | me1200vlantagtype | read-write |
Indicates the VLAN tag type to match. |
| me1200QosQceVlanIdOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.11 | me1200asrtype | read-write |
Indicates how a packets's VLAN ID is to be compared. |
| me1200QosQceVlanId | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.12 | me1200unsigned16 | read-write |
The VLAN ID to be compared. If the VlanIdOp object in the same row is range(2), this object will be the starting VLAN ID of the range. Valid range is 1-4095. This object can only be configured if VlanIdOp is not any(0). |
| me1200QosQceVlanIdRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.13 | me1200unsigned16 | read-write |
The VLAN ID to be compared. If the VlanIdOp object in the same row is range(2), this object will be the ending VLAN ID of the range. Valid range is 1-4095. This object can only be configured if VlanIdOp is range(2). |
| me1200QosQcePcp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.14 | me1200vlantagpriority | read-write |
The PCP value(s) to be compared. |
| me1200QosQceDei | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.15 | me1200bittype | read-write |
The DEI value to be compared. Valid range is 0-1. |
| me1200QosQceInnerVlanTagType | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.16 | me1200vlantagtype | read-write |
Indicates the inner VLAN tag type to match. |
| me1200QosQceInnerVlanIdOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.17 | me1200asrtype | read-write |
Indicates how a packets's inner VLAN ID is to be compared. |
| me1200QosQceInnerVlanId | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.18 | me1200unsigned16 | read-write |
The inner VLAN ID to be compared. If the InnerVlanIdOp object in the same row is range(2), this object will be the starting VLAN ID of the range. Valid range is 1-4095. This object can only be configured if InnerVlanIdOp is not any(0). |
| me1200QosQceInnerVlanIdRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.19 | me1200unsigned16 | read-write |
The inner VLAN ID to be compared. If the InnerVlanIdOp object in the same row is range(2), this object will be the ending VLAN ID of the range. Valid range is 1-4095. This object can only be configured if InnerVlanIdOp is range(2). |
| me1200QosQceInnerPcp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.20 | me1200vlantagpriority | read-write |
The inner PCP value(s) to be compared. |
| me1200QosQceInnerDei | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.21 | me1200bittype | read-write |
The inner DEI value to be compared. Valid range is 0-1. |
| me1200QosQceFrameType | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.100 | me1200qceframetype | read-write |
Indicates the packet's frame type. Modifying the frame type on an existing QCE will restore the content of all frame type dependent configuration to default. |
| me1200QosQceEtype | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.101 | me1200ethertype | read-write |
Indicates the packet's 16 bit Ethernet type field. Valid values are: 0(match any), 0x600-0xFFFF but excluding 0x800(IPv4) and 0x86DD(IPv6).This object can only be configured if FrameType is etype(1). |
| me1200QosQceLlcDsap | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.200 | me1200unsigned8 | read-write |
Indicates the packets's 8 bit LLC DSAP field. The packets LLC DSAP field is AND-ed with the value of LlcDsapMask and then compared against the value of this object. If this object value and the value of LlcDsapMask is 0x00, this entry matches any LLC DSAP. Valid range is 0x00-0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceLlcDsapMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.201 | me1200unsigned8 | read-write |
Indicates the 8 bit LLC DSAP mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceLlcSsap | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.202 | me1200unsigned8 | read-write |
Indicates the packets's 8 bit LLC SSAP field. The packets LLC SSAP field is AND-ed with the value of LlcSsapMask and then compared against the value of this object. If this object value and the value of LlcSsapMask is 0x00, this entry matches any LLC SSAP. Valid range is 0x00-0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceLlcSsapMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.203 | me1200unsigned8 | read-write |
Indicates the 8 bit LLC SSAP mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceLlcControl | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.204 | me1200unsigned8 | read-write |
Indicates the packets's 8 bit LLC Control field. The packets LLC Control field is AND-ed with the value of LlcControlMask and then compared against the value of this object. If this object value and the value of LlcControlMask is 0x00, this entry matches any LLC Control. Valid range is 0x00-0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceLlcControlMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.205 | me1200unsigned8 | read-write |
Indicates the 8 bit LLC Control mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceSnapPid | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.302 | me1200unsigned16 | read-write |
Indicates the packet's 16 bit SNAP PID field. The packets SNAP PID field is AND-ed with the value of SnapPidMask and then compared against the value of this object. If this object value and the value of SnapPidMask is 0x0000, this entry matches any ethertype. This object can only be configured if FrameType is snap(3). |
| me1200QosQceSnapPidMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.303 | me1200unsigned16 | read-write |
Indicates the 16 bit SNAP PID mask. Valid values are 0x0000 or 0xFFFF. This object can only be configured if FrameType is snap(3). |
| me1200QosQceIpv4Fragment | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.400 | me1200bittype | read-write |
Indicates how an IPv4 fragment bit is to be compared. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceIpv4DscpOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.401 | me1200asrtype | read-write |
Indicates how an IPv4 DSCP field is to be compared. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceIpv4Dscp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.402 | me1200unsigned16 | read-write |
The DSCP value to be compared. If the Ipv4DscpOp object in the same row is range(2), this object will be the starting DSCP value of the range. Valid range is 0-63. This object can only be configured if FrameType is ipv4(4) and Ipv4DscpOp is not any(0). |
| me1200QosQceIpv4DscpRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.403 | me1200unsigned16 | read-write |
The DSCP value to be compared. If the Ipv4DscpOp object in the same row is range(2), this object will be the ending DSCP value of the range. Valid range is 0-63. This object can only be configured if FrameType is ipv4(4) and Ipv4DscpOp is range(2). |
| me1200QosQceIpv4Protocol | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.404 | me1200unsigned8 | read-write |
The protocol number field in the IPv4 header used to indicate a higher layer protocol. The packets protocol number field is AND-ed with the value of Ipv4ProtocolMask and then compared with the value of this object. If Ipv4Protocol and Ipv4protocolMask are 0, this entry matches any IPv4 protocol. Valid range is 0-255. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceIpv4ProtocolMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.405 | me1200unsigned8 | read-write |
The specified IPv4 protocol number mask. Valid values are 0 or 255. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceIpv4SrcIp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.406 | ipaddress | read-write |
The specified IPv4 source address. The packets source address is AND-ed with the value of Ipv4SrcIpMask and then compared with the value of this object. If Ipv4SrcIP and Ipv4SrcIpMask are 0.0.0.0, this entry matches any IPv4 source address. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceIpv4SrcIpMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.407 | ipaddress | read-write |
The specified IPv4 source address mask. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceIpv4DestIp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.408 | ipaddress | read-write |
The specified IPv4 destination address. The packets destination address is AND-ed with the value of Ipv4DestIpMask and then compared with the value of this object. If Ipv4DestIP and Ipv4DestIpMask are 0.0.0.0, this entry matches any IPv4 destination address. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceIpv4DestIpMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.409 | ipaddress | read-write |
The specified IPv4 destination address mask. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceIpv4SrcPortOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.410 | me1200asrtype | read-write |
Indicates how a packet's source TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceIpv4SrcPort | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.411 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp object in the same row is range(2), this object will be the starting port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is not any(0). |
| me1200QosQceIpv4SrcPortRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.412 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp object in the same row is range(2), this object will be the ending port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is range(2). |
| me1200QosQceIpv4DestPortOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.413 | me1200asrtype | read-write |
Indicates how a packet's destination TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceIpv4DestPort | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.414 | me1200unsigned16 | read-write |
The destination port number of the TCP or UDP protocol. If the Ipv4DestPortOp object in the same row is range(2), this object will be the starting port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv4(4) and Ipv4DestPortOp is not any(0). |
| me1200QosQceIpv4DestPortRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.415 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv4DestPortOp object in the same row is range(2), this object will be the ending port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv4(4) and Ipv4DestPortOp is range(2). |
| me1200QosQceIpv6DscpOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.500 | me1200asrtype | read-write |
Indicates how an IPv6 DSCP field is to be compared. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceIpv6Dscp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.501 | me1200unsigned16 | read-write |
The DSCP value to be compared. If the Ipv6DscpOp object in the same row is range(2), this object will be the starting DSCP value of the range. Valid range is 0-63. This object can only be configured if FrameType is ipv6(5) and Ipv6DscpOp is not any(0). |
| me1200QosQceIpv6DscpRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.502 | me1200unsigned16 | read-write |
The DSCP value to be compared. If the Ipv6DscpOp object in the same row is range(2), this object will be the ending DSCP value of the range. Valid range is 0-63. This object can only be configured if FrameType is ipv6(5) and Ipv6DscpOp is range(2). |
| me1200QosQceIpv6Protocol | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.503 | me1200unsigned8 | read-write |
The protocol number field in the IPv6 header used to indicate a higher layer protocol. The packets protocol number field is AND-ed with the value of Ipv6ProtocolMask and then compared with the value of this object. If Ipv46rotocol and Ipv6protocolMask are 0, this entry matches any IPv6 protocol. Valid range is 0-255. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceIpv6ProtocolMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.504 | me1200unsigned8 | read-write |
The specified IPv6 protocol number mask. Valid values are 0 or 255. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceIpv6SrcIp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.506 | inetaddressipv6 | read-write |
The specified IPv6 source address. The packets source address is AND-ed with the value of Ipv6SrcIpMask and then compared with the value of this object. If Ipv6SrcIP and Ipv6SrcIpMask are all zeros, this entry matches any IPv6 source address. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceIpv6SrcIpMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.508 | inetaddressipv6 | read-write |
The specified IPv6 source address mask. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceIpv6DestIp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.510 | inetaddressipv6 | read-write |
The specified IPv6 destination address. The packets destination address is AND-ed with the value of Ipv6DestIpMask and then compared with the value of this object. If Ipv6DestIP and Ipv6DestIpMask are all zeros, this entry matches any IPv6 destination address. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceIpv6DestIpMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.512 | inetaddressipv6 | read-write |
The specified IPv6 destination address mask. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceIpv6SrcPortOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.513 | me1200asrtype | read-write |
Indicates how a packet's source TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceIpv6SrcPort | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.514 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp object in the same row is range(2), this object will be the starting port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is not any(0). |
| me1200QosQceIpv6SrcPortRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.515 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp object in the same row is range(2), this object will be the ending port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is range(2). |
| me1200QosQceIpv6DestPortOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.516 | me1200asrtype | read-write |
Indicates how a packet's destination TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceIpv6DestPort | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.517 | me1200unsigned16 | read-write |
The destination port number of the TCP or UDP protocol. If the Ipv6DestPortOp object in the same row is range(2), this object will be the starting port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv6(5) and Ipv6DestPortOp is not any(0). |
| me1200QosQceIpv6DestPortRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.518 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv6DestPortOp object in the same row is range(2), this object will be the ending port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv6(5) and Ipv6DestPortOp is range(2). |
| me1200QosQceActionCosEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1000 | truthvalue | read-write |
If true, the packet is classified to the CoS value in ActionCos. |
| me1200QosQceActionCos | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1001 | unsigned32 | read-write |
The CoS value used for classification. Valid range is 0-7. |
| me1200QosQceActionDplEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1002 | truthvalue | read-write |
If true, the packet is classified to the DPL value in ActionDpl. |
| me1200QosQceActionDpl | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1003 | me1200unsigned8 | read-write |
The DPL value used for classification. Valid range is 0-1. |
| me1200QosQceActionDscpEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1004 | truthvalue | read-write |
If true, the packet is classified to the DSCP value in ActionDscp. |
| me1200QosQceActionDscp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1005 | me1200unsigned8 | read-write |
The DSCP value used for classification. Valid range is 0-1. |
| me1200QosQceActionPcpDeiEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1006 | truthvalue | read-write |
If true, the packet is classified to the PCP value in ActionPcp and the DEI value in ActionDei. |
| me1200QosQceActionPcp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1007 | unsigned32 | read-write |
The PCP value used for classification. Valid range is 0-7. |
| me1200QosQceActionDei | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1008 | me1200unsigned8 | read-write |
The DEI value used for classification. Valid range is 0-1. |
| me1200QosQceActionPolicyEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1009 | truthvalue | read-write |
If true, the packet is classified to the policy number in ActionPolicy. |
| me1200QosQceActionPolicy | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.1010 | unsigned32 | read-write |
The policy number used for classification. Valid range is 0-63. |
| me1200QosQceAction | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.1.1.10000 | me1200roweditorstate | read-write |
Action |
| me1200QosQceTableRowEditor | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2 | |||
| me1200QosQceTableRowEditorQceId | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1 | integer32 | read-write |
QCE Id index. |
| me1200QosQceTableRowEditorNextQceId | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.2 | unsigned32 | read-write |
QCE Id of the next QCE. |
| me1200QosQceTableRowEditorPortList | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.4 | me1200portlist | read-write |
List of ports that are member of this QCE. |
| me1200QosQceTableRowEditorDestMacType | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.5 | me1200destmactype | read-write |
Indicates the destination MAC type to match. |
| me1200QosQceTableRowEditorDestMac | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.6 | macaddress | read-write |
Indicates the 48 bits destination MAC address. The packets destination address is AND-ed with the value of DestMacMask and then compared against the value of this object. If this object value and the value of DestMacMask is 00-00-00-00-00-00, this entry matches any destination MAC address. This object can only be configured if DestMacType is any(0) and DestMacMask is ff-ff-ff-ff-ff-ff. |
| me1200QosQceTableRowEditorDestMacMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.7 | macaddress | read-write |
Indicates the 48 bits destination MAC address mask.Valid values are 00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff. |
| me1200QosQceTableRowEditorSrcMac | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.8 | macaddress | read-write |
Indicates the 48 bits source MAC address. The packets source address is AND-ed with the value of SrcMacMask and then compared against the value of this object. If this object value and the value of SrcMacMask is 00-00-00-00-00-00, this entry matches any source MAC address. This object can only be configured if SrcMacMask is ff-ff-ff-ff-ff-ff. |
| me1200QosQceTableRowEditorSrcMacMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.9 | macaddress | read-write |
Indicates the 48 bits source MAC address mask. Valid values are 00-00-00-00-00-00 or ff-ff-ff-ff-ff-ff. |
| me1200QosQceTableRowEditorVlanTagType | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.10 | me1200vlantagtype | read-write |
Indicates the VLAN tag type to match. |
| me1200QosQceTableRowEditorVlanIdOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.11 | me1200asrtype | read-write |
Indicates how a packets's VLAN ID is to be compared. |
| me1200QosQceTableRowEditorVlanId | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.12 | me1200unsigned16 | read-write |
The VLAN ID to be compared. If the VlanIdOp object in the same row is range(2), this object will be the starting VLAN ID of the range. Valid range is 1-4095. This object can only be configured if VlanIdOp is not any(0). |
| me1200QosQceTableRowEditorVlanIdRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.13 | me1200unsigned16 | read-write |
The VLAN ID to be compared. If the VlanIdOp object in the same row is range(2), this object will be the ending VLAN ID of the range. Valid range is 1-4095. This object can only be configured if VlanIdOp is range(2). |
| me1200QosQceTableRowEditorPcp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.14 | me1200vlantagpriority | read-write |
The PCP value(s) to be compared. |
| me1200QosQceTableRowEditorDei | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.15 | me1200bittype | read-write |
The DEI value to be compared. Valid range is 0-1. |
| me1200QosQceTableRowEditorInnerVlanTagType | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.16 | me1200vlantagtype | read-write |
Indicates the inner VLAN tag type to match. |
| me1200QosQceTableRowEditorInnerVlanIdOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.17 | me1200asrtype | read-write |
Indicates how a packets's inner VLAN ID is to be compared. |
| me1200QosQceTableRowEditorInnerVlanId | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.18 | me1200unsigned16 | read-write |
The inner VLAN ID to be compared. If the InnerVlanIdOp object in the same row is range(2), this object will be the starting VLAN ID of the range. Valid range is 1-4095. This object can only be configured if InnerVlanIdOp is not any(0). |
| me1200QosQceTableRowEditorInnerVlanIdRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.19 | me1200unsigned16 | read-write |
The inner VLAN ID to be compared. If the InnerVlanIdOp object in the same row is range(2), this object will be the ending VLAN ID of the range. Valid range is 1-4095. This object can only be configured if InnerVlanIdOp is range(2). |
| me1200QosQceTableRowEditorInnerPcp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.20 | me1200vlantagpriority | read-write |
The inner PCP value(s) to be compared. |
| me1200QosQceTableRowEditorInnerDei | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.21 | me1200bittype | read-write |
The inner DEI value to be compared. Valid range is 0-1. |
| me1200QosQceTableRowEditorFrameType | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.100 | me1200qceframetype | read-write |
Indicates the packet's frame type. Modifying the frame type on an existing QCE will restore the content of all frame type dependent configuration to default. |
| me1200QosQceTableRowEditorEtype | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.101 | me1200ethertype | read-write |
Indicates the packet's 16 bit Ethernet type field. Valid values are: 0(match any), 0x600-0xFFFF but excluding 0x800(IPv4) and 0x86DD(IPv6).This object can only be configured if FrameType is etype(1). |
| me1200QosQceTableRowEditorLlcDsap | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.200 | me1200unsigned8 | read-write |
Indicates the packets's 8 bit LLC DSAP field. The packets LLC DSAP field is AND-ed with the value of LlcDsapMask and then compared against the value of this object. If this object value and the value of LlcDsapMask is 0x00, this entry matches any LLC DSAP. Valid range is 0x00-0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceTableRowEditorLlcDsapMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.201 | me1200unsigned8 | read-write |
Indicates the 8 bit LLC DSAP mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceTableRowEditorLlcSsap | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.202 | me1200unsigned8 | read-write |
Indicates the packets's 8 bit LLC SSAP field. The packets LLC SSAP field is AND-ed with the value of LlcSsapMask and then compared against the value of this object. If this object value and the value of LlcSsapMask is 0x00, this entry matches any LLC SSAP. Valid range is 0x00-0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceTableRowEditorLlcSsapMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.203 | me1200unsigned8 | read-write |
Indicates the 8 bit LLC SSAP mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceTableRowEditorLlcControl | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.204 | me1200unsigned8 | read-write |
Indicates the packets's 8 bit LLC Control field. The packets LLC Control field is AND-ed with the value of LlcControlMask and then compared against the value of this object. If this object value and the value of LlcControlMask is 0x00, this entry matches any LLC Control. Valid range is 0x00-0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceTableRowEditorLlcControlMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.205 | me1200unsigned8 | read-write |
Indicates the 8 bit LLC Control mask. Valid values are 0x00 or 0xFF. This object can only be configured if FrameType is llc(2). |
| me1200QosQceTableRowEditorSnapPid | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.302 | me1200unsigned16 | read-write |
Indicates the packet's 16 bit SNAP PID field. The packets SNAP PID field is AND-ed with the value of SnapPidMask and then compared against the value of this object. If this object value and the value of SnapPidMask is 0x0000, this entry matches any ethertype. This object can only be configured if FrameType is snap(3). |
| me1200QosQceTableRowEditorSnapPidMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.303 | me1200unsigned16 | read-write |
Indicates the 16 bit SNAP PID mask. Valid values are 0x0000 or 0xFFFF. This object can only be configured if FrameType is snap(3). |
| me1200QosQceTableRowEditorIpv4Fragment | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.400 | me1200bittype | read-write |
Indicates how an IPv4 fragment bit is to be compared. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceTableRowEditorIpv4DscpOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.401 | me1200asrtype | read-write |
Indicates how an IPv4 DSCP field is to be compared. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceTableRowEditorIpv4Dscp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.402 | me1200unsigned16 | read-write |
The DSCP value to be compared. If the Ipv4DscpOp object in the same row is range(2), this object will be the starting DSCP value of the range. Valid range is 0-63. This object can only be configured if FrameType is ipv4(4) and Ipv4DscpOp is not any(0). |
| me1200QosQceTableRowEditorIpv4DscpRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.403 | me1200unsigned16 | read-write |
The DSCP value to be compared. If the Ipv4DscpOp object in the same row is range(2), this object will be the ending DSCP value of the range. Valid range is 0-63. This object can only be configured if FrameType is ipv4(4) and Ipv4DscpOp is range(2). |
| me1200QosQceTableRowEditorIpv4Protocol | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.404 | me1200unsigned8 | read-write |
The protocol number field in the IPv4 header used to indicate a higher layer protocol. The packets protocol number field is AND-ed with the value of Ipv4ProtocolMask and then compared with the value of this object. If Ipv4Protocol and Ipv4protocolMask are 0, this entry matches any IPv4 protocol. Valid range is 0-255. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceTableRowEditorIpv4ProtocolMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.405 | me1200unsigned8 | read-write |
The specified IPv4 protocol number mask. Valid values are 0 or 255. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceTableRowEditorIpv4SrcIp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.406 | ipaddress | read-write |
The specified IPv4 source address. The packets source address is AND-ed with the value of Ipv4SrcIpMask and then compared with the value of this object. If Ipv4SrcIP and Ipv4SrcIpMask are 0.0.0.0, this entry matches any IPv4 source address. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceTableRowEditorIpv4SrcIpMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.407 | ipaddress | read-write |
The specified IPv4 source address mask. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceTableRowEditorIpv4DestIp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.408 | ipaddress | read-write |
The specified IPv4 destination address. The packets destination address is AND-ed with the value of Ipv4DestIpMask and then compared with the value of this object. If Ipv4DestIP and Ipv4DestIpMask are 0.0.0.0, this entry matches any IPv4 destination address. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceTableRowEditorIpv4DestIpMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.409 | ipaddress | read-write |
The specified IPv4 destination address mask. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceTableRowEditorIpv4SrcPortOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.410 | me1200asrtype | read-write |
Indicates how a packet's source TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceTableRowEditorIpv4SrcPort | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.411 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp object in the same row is range(2), this object will be the starting port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is not any(0). |
| me1200QosQceTableRowEditorIpv4SrcPortRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.412 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv4SrcPortOp object in the same row is range(2), this object will be the ending port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv4(4) and Ipv4SrcPortOp is range(2). |
| me1200QosQceTableRowEditorIpv4DestPortOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.413 | me1200asrtype | read-write |
Indicates how a packet's destination TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv4(4). |
| me1200QosQceTableRowEditorIpv4DestPort | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.414 | me1200unsigned16 | read-write |
The destination port number of the TCP or UDP protocol. If the Ipv4DestPortOp object in the same row is range(2), this object will be the starting port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv4(4) and Ipv4DestPortOp is not any(0). |
| me1200QosQceTableRowEditorIpv4DestPortRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.415 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv4DestPortOp object in the same row is range(2), this object will be the ending port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv4(4) and Ipv4DestPortOp is range(2). |
| me1200QosQceTableRowEditorIpv6DscpOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.500 | me1200asrtype | read-write |
Indicates how an IPv6 DSCP field is to be compared. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceTableRowEditorIpv6Dscp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.501 | me1200unsigned16 | read-write |
The DSCP value to be compared. If the Ipv6DscpOp object in the same row is range(2), this object will be the starting DSCP value of the range. Valid range is 0-63. This object can only be configured if FrameType is ipv6(5) and Ipv6DscpOp is not any(0). |
| me1200QosQceTableRowEditorIpv6DscpRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.502 | me1200unsigned16 | read-write |
The DSCP value to be compared. If the Ipv6DscpOp object in the same row is range(2), this object will be the ending DSCP value of the range. Valid range is 0-63. This object can only be configured if FrameType is ipv6(5) and Ipv6DscpOp is range(2). |
| me1200QosQceTableRowEditorIpv6Protocol | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.503 | me1200unsigned8 | read-write |
The protocol number field in the IPv6 header used to indicate a higher layer protocol. The packets protocol number field is AND-ed with the value of Ipv6ProtocolMask and then compared with the value of this object. If Ipv46rotocol and Ipv6protocolMask are 0, this entry matches any IPv6 protocol. Valid range is 0-255. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceTableRowEditorIpv6ProtocolMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.504 | me1200unsigned8 | read-write |
The specified IPv6 protocol number mask. Valid values are 0 or 255. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceTableRowEditorIpv6SrcIp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.506 | inetaddressipv6 | read-write |
The specified IPv6 source address. The packets source address is AND-ed with the value of Ipv6SrcIpMask and then compared with the value of this object. If Ipv6SrcIP and Ipv6SrcIpMask are all zeros, this entry matches any IPv6 source address. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceTableRowEditorIpv6SrcIpMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.508 | inetaddressipv6 | read-write |
The specified IPv6 source address mask. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceTableRowEditorIpv6DestIp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.510 | inetaddressipv6 | read-write |
The specified IPv6 destination address. The packets destination address is AND-ed with the value of Ipv6DestIpMask and then compared with the value of this object. If Ipv6DestIP and Ipv6DestIpMask are all zeros, this entry matches any IPv6 destination address. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceTableRowEditorIpv6DestIpMask | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.512 | inetaddressipv6 | read-write |
The specified IPv6 destination address mask. Only the least significant 32 bits of this object are used. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceTableRowEditorIpv6SrcPortOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.513 | me1200asrtype | read-write |
Indicates how a packet's source TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceTableRowEditorIpv6SrcPort | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.514 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp object in the same row is range(2), this object will be the starting port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is not any(0). |
| me1200QosQceTableRowEditorIpv6SrcPortRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.515 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv6SrcPortOp object in the same row is range(2), this object will be the ending port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv6(5) and Ipv6SrcPortOp is range(2). |
| me1200QosQceTableRowEditorIpv6DestPortOp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.516 | me1200asrtype | read-write |
Indicates how a packet's destination TCP/UDP port number is to be compared. This object can only be configured if FrameType is ipv6(5). |
| me1200QosQceTableRowEditorIpv6DestPort | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.517 | me1200unsigned16 | read-write |
The destination port number of the TCP or UDP protocol. If the Ipv6DestPortOp object in the same row is range(2), this object will be the starting port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv6(5) and Ipv6DestPortOp is not any(0). |
| me1200QosQceTableRowEditorIpv6DestPortRange | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.518 | me1200unsigned16 | read-write |
The source port number of the TCP or UDP protocol. If the Ipv6DestPortOp object in the same row is range(2), this object will be the ending port number of the port range. Valid range is 0-65535. This object can only be configured if FrameType is ipv6(5) and Ipv6DestPortOp is range(2). |
| me1200QosQceTableRowEditorActionCosEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1000 | truthvalue | read-write |
If true, the packet is classified to the CoS value in ActionCos. |
| me1200QosQceTableRowEditorActionCos | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1001 | unsigned32 | read-write |
The CoS value used for classification. Valid range is 0-7. |
| me1200QosQceTableRowEditorActionDplEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1002 | truthvalue | read-write |
If true, the packet is classified to the DPL value in ActionDpl. |
| me1200QosQceTableRowEditorActionDpl | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1003 | me1200unsigned8 | read-write |
The DPL value used for classification. Valid range is 0-1. |
| me1200QosQceTableRowEditorActionDscpEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1004 | truthvalue | read-write |
If true, the packet is classified to the DSCP value in ActionDscp. |
| me1200QosQceTableRowEditorActionDscp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1005 | me1200unsigned8 | read-write |
The DSCP value used for classification. Valid range is 0-1. |
| me1200QosQceTableRowEditorActionPcpDeiEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1006 | truthvalue | read-write |
If true, the packet is classified to the PCP value in ActionPcp and the DEI value in ActionDei. |
| me1200QosQceTableRowEditorActionPcp | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1007 | unsigned32 | read-write |
The PCP value used for classification. Valid range is 0-7. |
| me1200QosQceTableRowEditorActionDei | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1008 | me1200unsigned8 | read-write |
The DEI value used for classification. Valid range is 0-1. |
| me1200QosQceTableRowEditorActionPolicyEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1009 | truthvalue | read-write |
If true, the packet is classified to the policy number in ActionPolicy. |
| me1200QosQceTableRowEditorActionPolicy | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.1010 | unsigned32 | read-write |
The policy number used for classification. Valid range is 0-63. |
| me1200QosQceTableRowEditorAction | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.2.10000 | me1200roweditorstate | read-write |
Action |
| me1200QosQcePrecedenceTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3 | no-access |
This table contains the precedence of QCEs ordered by their position in the QCL. |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1 | no-access |
Each row contains the precedence of a single QCE. |
||
| me1200QosQcePrecedenceIndex | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1.1 | integer32 | no-access |
QCE precedence index. Indicates the position in QCL. |
| me1200QosQcePrecedenceQceId | 1.3.6.1.4.1.9.9.815.1.14.1.2.1.10.3.1.2 | unsigned32 | read-only |
QCE Id. |
| me1200QosInterface | 1.3.6.1.4.1.9.9.815.1.14.1.2.2 | |||
| me1200QosIfConfigTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1 | no-access |
This table provides QoS configuration for QoS manageable interfaces |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1 | no-access |
Each row contains the configuration for a specific interface |
||
| me1200QosIfConfigIfIndex | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.1 | me1200interfaceindex | no-access |
Logical interface index. |
| me1200QosIfConfigCos | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.2 | unsigned32 | read-write |
The default CoS value a packet is classified to. Valid range is 0-7. |
| me1200QosIfConfigDpl | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.3 | me1200unsigned8 | read-write |
The default DPL (Drop Precedence Level) a packet is classified to. Valid range is 0-1. |
| me1200QosIfConfigPcp | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.4 | unsigned32 | read-write |
The default PCP value a packet is classified to. Valid range is 0-7. |
| me1200QosIfConfigDei | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.5 | me1200unsigned8 | read-write |
The default DEI value a packet is classified to. Valid range is 0-1. |
| me1200QosIfConfigTrustTag | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.6 | truthvalue | read-write |
If true and the packet is VLAN tagged, then the CoS and DPL assigned to the packet is the PCP and DEI value in the packet mapped to a CoS and DPL value defined in the qosTagToCosTable. |
| me1200QosIfConfigTrustDscp | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.7 | truthvalue | read-write |
If true and the packet type is IPv4 or IPv6 and the packet DSCP value is trusted in qosDscpTable, then the CoS and DPL assigned to the packet is the DSCP value in the packet mapped to a CoS and DPL value defined in the qosDscpTable. |
| me1200QosIfConfigDwrrCount | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.8 | me1200unsigned8 | read-write |
The number of queues that are running Deficit Weighted Round Robin scheduling. This value is restricted to 0 or 6. |
| me1200QosIfConfigTagRemarkingMode | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.9 | me1200tagremarkingmode | read-write |
Selects the tag remarking mode for egress. Valid values are: 'classified' : Remark the tag with the classified values of PCP and DEI. 'default' : Remark the tag with the configured TagPcp and TagDei. 'mapped' : Remark the tag with the values from the classified CoS and DPL mapped through the qosCosToTagTable |
| me1200QosIfConfigTagPcp | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.10 | unsigned32 | read-write |
The PCP value to put in the packet if TagRemarkingMode is set to 'default'. Valid range is 0-7. |
| me1200QosIfConfigTagDei | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.11 | me1200unsigned8 | read-write |
The DEI value to put in the packet if TagRemarkingMode is set to 'default'. Valid range is 0-1. |
| me1200QosIfConfigDscpTranslate | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.12 | truthvalue | read-write |
If true then the classified DSCP value is the DSCP value in the packed mapped to a new DSCP value defined in qosDscpTable.IngressTranslation. |
| me1200QosIfConfigDscpClassify | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.13 | me1200dscpclassify | read-write |
Selects if and how the classified DSCP is based on the classified CoS and DPL for IPv4 and IPv6 packets on ingress. If a packet is selected for being classified to a new DSCP, the classification in based on the classified CoS mapped to a new DSCP value through the qosCosToDscpTable. If the classified DPL is 1, the new DSCP value is taken from the DscpDp1 entry, otherwise it is taken from the Dscp entry. Valid values are: 'none' : Always classify to the DSCP value in the received packet and ignore the classified CoS and DPL. 'zero' : If the DSCP value in the received packet is 0, then classify to a new DSCP value based on the classified CoS and DPL. 'selected' : If the DSCP value in the received packet is enabled in qosDscpTable.Classify, then classify to a new DSCP value based on the classified CoS and DPL. 'all' : Always classify to a new DSCP value based on the classified CoS and DPL. |
| me1200QosIfConfigDscpRemark | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.14 | me1200dscpremark | read-write |
Selects if and how the classified DSCP is written into the packet at egress. Valid values are: 'disabled' : Do not write the classified DSCP into the packet. 'rewrite' : Write the classified DSCP into the packet. 'remap' : Remap the classified DSCP through qosDscpTable, and write the value from EgressTranslation into the packet. 'remap-dp' : Remap the classified DSCP through qosDscpTable. If the classified DPL is 0 then write the value from EgressTranslation into the packet, otherwise write the value from EgressTranslationDp1 into the packet. |
| me1200QosIfConfigQceAddressMode | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.15 | truthvalue | read-write |
If false, the QCE classification for this interface is based on source (SMAC/SIP) addresses. If true, the QCE classification for this interface is based on destination (DMAC/DIP) addresses. This parameter is only used when the QceKeyType is Normal. |
| me1200QosIfConfigQceKeyType | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.1.1.16 | me1200vcapkeytype | read-write |
The key type specifying the key generated for packets received on the interface. Valid values are: 'normal' : Half key, match outer tag, SIP and SMAC. 'double-tag' : Quarter key, match inner and outer tag. 'ip-addr' : Half key, match inner and outer tag, SIP and DIP. For non-IP frames, match outer tag only. 'mac-ip-addr' : Full key, match inner and outer tag, SMAC, DMAC, SIP and DIP. Filtering on DMAC type (unicast/multicast/broadcast) is supported for any key type. |
| me1200QosIfTagToCosTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2 | no-access |
This table contains the mapping of (interface, PCP, DEI) to (CoS, DPL) values.The mappings given by this table is used for all tagged packets received on an interface if and only if that interface has the value of TrustTag set to 'true' |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1 | no-access |
Each row contains the mapping from (interface, PCP, DEI) to (CoS, DPL) values. |
||
| me1200QosIfTagToCosIfIndex | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.1 | me1200interfaceindex | no-access |
Logical interface index. |
| me1200QosIfTagToCosPcp | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.2 | integer32 | no-access |
PCP index. |
| me1200QosIfTagToCosDei | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.3 | integer32 | no-access |
DEI index. |
| me1200QosIfTagToCosCos | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.4 | unsigned32 | read-write |
The CoS value which this entry maps to. Valid range is 0-7. |
| me1200QosIfTagToCosDpl | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.2.1.5 | me1200unsigned8 | read-write |
The DPL (Drop Precedence Level) value which this entry maps to. Valid range is 0-1. |
| me1200QosIfCosToTagTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3 | no-access |
This table contains the mapping of (interface, CoS, DPL) to (PCP, DEI) values.The mappings given by this table is used for packets transmitted on an interface if and only if that interface has the value of TagRemarkingMode set to 'mapped' |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1 | no-access |
Each row contains the mapping from (interface, CoS, DPL) to (PCP, DEI) values. |
||
| me1200QosIfCosToTagIfIndex | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.1 | me1200interfaceindex | no-access |
Logical interface index. |
| me1200QosIfCosToTagCos | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.2 | integer32 | no-access |
CoS index. |
| me1200QosIfCosToTagDpl | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.3 | integer32 | no-access |
DPL index. |
| me1200QosIfCosToTagPcp | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.4 | unsigned32 | read-write |
The PCP value which this entry maps to. Valid range is 0-7. |
| me1200QosIfCosToTagDei | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.3.1.5 | me1200unsigned8 | read-write |
The DEI value which this entry maps to. Valid range is 0-1. |
| me1200QosIfPolicerTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4 | no-access |
This table provides policer configuration for an interface |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1 | no-access |
Each row contains the configuration for a specific policer |
||
| me1200QosIfPolicerIfIndex | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.1 | me1200interfaceindex | no-access |
Logical interface index. |
| me1200QosIfPolicerEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.2 | truthvalue | read-write |
If true, the port policer is enabled. |
| me1200QosIfPolicerFrameRate | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.3 | truthvalue | read-write |
If true, the rate is measured in fps instead of kbps. |
| me1200QosIfPolicerFlowControl | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.4 | truthvalue | read-write |
If true, and flow control is enabled on the interface, then issue flow control pause frames instead of discarding frames. |
| me1200QosIfPolicerCir | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.4.1.5 | unsigned32 | read-write |
Committed Information Rate. Measured in kbps if FrameRate is false and fps if FrameRate is true. Valid range is 100-3300000. |
| me1200QosIfQueuePolicerTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5 | no-access |
This table provides queue policer configuration for interfaces |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1 | no-access |
Each row contains the configuration for a specific queue policer |
||
| me1200QosIfQueuePolicerIfIndex | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.1 | me1200interfaceindex | no-access |
Logical interface index. |
| me1200QosIfQueuePolicerQueue | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.2 | integer32 | no-access |
Queue index. |
| me1200QosIfQueuePolicerEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.3 | truthvalue | read-write |
If true, the queue policer is enabled. |
| me1200QosIfQueuePolicerCir | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.5.1.6 | unsigned32 | read-write |
Committed Information Rate. Measured in kbps. Valid range is 100-3300000. |
| me1200QosIfShaperTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.6 | no-access |
This table provides shaper configuration for an interface |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1 | no-access |
Each row contains the configuration for a specific shaper |
||
| me1200QosIfShaperIfIndex | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.1 | me1200interfaceindex | no-access |
Logical interface index. |
| me1200QosIfShaperEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.2 | truthvalue | read-write |
If true, the port shaper is enabled. |
| me1200QosIfShaperCir | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.6.1.3 | unsigned32 | read-write |
Committed Information Rate. Measured in kbps. Valid range is 100-3300000. |
| me1200QosIfQueueShaperTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7 | no-access |
This table provides queue shaper configuration for interfaces |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1 | no-access |
Each row contains the configuration for a specific queue shaper |
||
| me1200QosIfQueueShaperIfIndex | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.1 | me1200interfaceindex | no-access |
Logical interface index. |
| me1200QosIfQueueShaperQueue | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.2 | integer32 | no-access |
Queue index. |
| me1200QosIfQueueShaperEnable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.3 | truthvalue | read-write |
If true, the queue shaper is enabled. |
| me1200QosIfQueueShaperExcess | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.4 | truthvalue | read-write |
If true, then allow this queue to get a share of the excess bandwidth. Excess bandwidth is allowed if this shaper is closed and no other queues with open shapers have frames for transmission. |
| me1200QosIfQueueShaperCir | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.7.1.5 | unsigned32 | read-write |
Committed Information Rate. Measured in kbps. Valid range is 100-3300000. |
| me1200QosIfSchedulerTable | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.8 | no-access |
This table contains the mapping of (interface, queue) to weight values.The mappings given by this table is used when an interface has the value of DwrrCount greater than 0. Read the qosSchedulerStatusTable in order to get the 'real' weights in percent as used by the hardware |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1 | no-access |
Each row contains the scheduler configuration for a specific queue. |
||
| me1200QosIfSchedulerIfIndex | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.1 | me1200interfaceindex | no-access |
Logical interface index. |
| me1200QosIfSchedulerQueue | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.2 | integer32 | no-access |
Queue index. |
| me1200QosIfSchedulerWeight | 1.3.6.1.4.1.9.9.815.1.14.1.2.2.8.1.3 | me1200percent | read-write |
The weight for this queue. Valid range is 1-100. |
| me1200QosStatus | 1.3.6.1.4.1.9.9.815.1.14.1.3 | |||
| me1200QosStatusGlobals | 1.3.6.1.4.1.9.9.815.1.14.1.3.1 | |||
| me1200QosStatusQceTable | 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1 | no-access |
This table contains the QCE status in the hardware table. |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1 | no-access |
Each row contains the status of a single QCE. |
||
| me1200QosStatusQceIndex | 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.2 | integer32 | no-access |
QCE precedence index. Indicates the position in QCL. |
| me1200QosStatusQceUserId | 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.3 | me1200qceusertype | read-only |
User Id. |
| me1200QosStatusQceQceId | 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.4 | unsigned32 | read-only |
QCE Id. |
| me1200QosStatusQceConflict | 1.3.6.1.4.1.9.9.815.1.14.1.3.1.1.1.100 | truthvalue | read-only |
If true, a resource conflict is detected. |
| me1200QosStatusInterface | 1.3.6.1.4.1.9.9.815.1.14.1.3.2 | |||
| me1200QosStatusIfTable | 1.3.6.1.4.1.9.9.815.1.14.1.3.2.1 | no-access |
This table provides QoS status for QoS manageable interfaces |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1 | no-access |
Each row contains the status for a specific interface |
||
| me1200QosStatusIfIfIndex | 1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1.1 | me1200interfaceindex | no-access |
Logical interface index. |
| me1200QosStatusIfCos | 1.3.6.1.4.1.9.9.815.1.14.1.3.2.1.1.2 | unsigned32 | read-only |
Some subsystems are allowed to modify the default CoS value for an interface. This object shows the actual default CoS value a packet is classified to. |
| me1200QosStatusIfSchedulerTable | 1.3.6.1.4.1.9.9.815.1.14.1.3.2.2 | no-access |
This table contains the mapping of (interface, queue) to weight values.The mappings given by this table are the 'real' weights in percent as used by the hardware |
|
| 1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1 | no-access |
Each row contains the scheduler status for a specific queue. |
||
| me1200QosStatusIfSchedulerIfIndex | 1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.1 | me1200interfaceindex | no-access |
Logical interface index. |
| me1200QosStatusIfSchedulerQueue | 1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.2 | integer32 | no-access |
Queue index. |
| me1200QosStatusIfSchedulerWeight | 1.3.6.1.4.1.9.9.815.1.14.1.3.2.2.1.3 | me1200percent | read-only |
The weight for this queue. Valid range is 1-100. |
| me1200QosControl | 1.3.6.1.4.1.9.9.815.1.14.1.4 | |||
| me1200QosControlGlobals | 1.3.6.1.4.1.9.9.815.1.14.1.4.1 | |||
| me1200QosControlGlobalsConflictResolve | 1.3.6.1.4.1.9.9.815.1.14.1.4.1.1 | truthvalue | read-write |
Set to true to resolve resource conflicts. If different components, such as ACEs, ECEs, VCEs, QCEs, competes for the same resources in the switch, it is possible that some of resources needed by one or more QCE are not available. These conflicts, if any, are shown in the qosQceStatusTable. To solve these conflicts, you must delete one or more of the competing settings and set ConflictResolve to true. The switch will then reapply the current QCE configuration. |
| me1200QosMIBConformance | 1.3.6.1.4.1.9.9.815.1.14.3 | |||
| me1200QosMIBCompliances | 1.3.6.1.4.1.9.9.815.1.14.3.1 | |||
| me1200QosMIBCompliance | 1.3.6.1.4.1.9.9.815.1.14.3.1.1 |
The compliance statement for the implementation. |
||
| me1200QosMIBGroups | 1.3.6.1.4.1.9.9.815.1.14.3.2 | |||
| me1200QosStormPolicerUnicastInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.1 |
A collection of objects suitable for bulk operations. |
||
| me1200QosStormPolicerMulticastInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.2 |
A collection of objects suitable for bulk operations. |
||
| me1200QosStormPolicerBroadcastInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.3 |
A collection of objects suitable for bulk operations. |
||
| me1200QosWredTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.4 |
A collection of objects suitable for bulk operations. |
||
| me1200QosDscpTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.5 |
A collection of objects suitable for bulk operations. |
||
| me1200QosCosToDscpTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.6 |
A collection of objects suitable for bulk operations. |
||
| me1200QosQceTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.7 |
A collection of objects suitable for bulk operations. |
||
| me1200QosQceTableRowEditorInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.8 |
A collection of objects suitable for bulk operations. |
||
| me1200QosQcePrecedenceTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.9 |
A collection of objects suitable for bulk operations. |
||
| me1200QosIfConfigTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.10 |
A collection of objects suitable for bulk operations. |
||
| me1200QosIfTagToCosTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.11 |
A collection of objects suitable for bulk operations. |
||
| me1200QosIfCosToTagTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.12 |
A collection of objects suitable for bulk operations. |
||
| me1200QosIfPolicerTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.13 |
A collection of objects suitable for bulk operations. |
||
| me1200QosIfQueuePolicerTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.14 |
A collection of objects suitable for bulk operations. |
||
| me1200QosIfShaperTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.15 |
A collection of objects suitable for bulk operations. |
||
| me1200QosIfQueueShaperTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.16 |
A collection of objects suitable for bulk operations. |
||
| me1200QosIfSchedulerTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.17 |
A collection of objects suitable for bulk operations. |
||
| me1200QosStatusQceTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.18 |
A collection of objects suitable for bulk operations. |
||
| me1200QosStatusIfTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.19 |
A collection of objects suitable for bulk operations. |
||
| me1200QosStatusIfSchedulerTableInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.20 |
A collection of objects suitable for bulk operations. |
||
| me1200QosControlGlobalsInfoGroup | 1.3.6.1.4.1.9.9.815.1.14.3.2.21 |
A collection of objects suitable for bulk operations. |
||