MAP-E-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: MAP-E-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mapMIB 1.3.6.1.2.1.242
This MIB module is defined for management of objects for MAP-E BRs or CEs. Copyright (c) 2018 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info).
         mapMIBObjects 1.3.6.1.2.1.242.1
             mapRule 1.3.6.1.2.1.242.1.1
                 mapRuleTable 1.3.6.1.2.1.242.1.1.1 no-access
The (conceptual) table containing rule information for a specific mapping rule. It can also be used for row creation.
                     mapRuleEntry 1.3.6.1.2.1.242.1.1.1.1 no-access
Each entry in this table contains the information on a particular mapping rule.
                         mapRuleID 1.3.6.1.2.1.242.1.1.1.1.1 unsigned32 no-access
A unique identifier used to distinguish mapping rules.
                         mapRuleIPv6Prefix 1.3.6.1.2.1.242.1.1.1.1.2 inetaddressipv6 read-only
The IPv6 prefix defined in the mapping rule that will be assigned to CEs.
                         mapRuleIPv6PrefixLen 1.3.6.1.2.1.242.1.1.1.1.3 inetaddressprefixlength read-only
The length of the IPv6 prefix defined in the mapping rule that will be assigned to CEs.
                         mapRuleIPv4Prefix 1.3.6.1.2.1.242.1.1.1.1.4 inetaddressipv4 read-only
The IPv4 prefix defined in the mapping rule that will be assigned to CEs.
                         mapRuleIPv4PrefixLen 1.3.6.1.2.1.242.1.1.1.1.5 inetaddressprefixlength read-only
The length of the IPv4 prefix defined in the mapping rule that will be assigned to CEs.
                         mapRuleBRIPv6Address 1.3.6.1.2.1.242.1.1.1.1.6 inetaddressipv6 read-only
The IPv6 address of the BR that will be conveyed to CEs. If the BR IPv6 address is anycast, the relay must use this anycast IPv6 address as the source address in packets relayed to CEs.
                         mapRulePSID 1.3.6.1.2.1.242.1.1.1.1.7 rulepsid read-only
The PSID value algorithmically identifies a set of ports assigned to a CE.
                         mapRulePSIDLen 1.3.6.1.2.1.242.1.1.1.1.8 unsigned32 read-only
The bit length value of the number of significant bits in the PSID field. When it is set to 0, the PSID field is to be ignored.
                         mapRuleOffset 1.3.6.1.2.1.242.1.1.1.1.9 unsigned32 read-only
The number of the mapRuleOffset is 6 by default to exclude the system ports (0-1023). It is provided via the Rule Port Mapping Parameters in the Basic Mapping Rule.
                         mapRuleEALen 1.3.6.1.2.1.242.1.1.1.1.10 unsigned32 read-only
The length of the Embedded Address (EA) defined in mapping rule that will be assigned to CEs.
                         mapRuleType 1.3.6.1.2.1.242.1.1.1.1.11 ruletype read-only
Indicates the type of mapping rule. '1' represents a BMR. '2' represents an FMR. '3' represents a BMR that is also an FMR for mesh mode.
             mapSecurityCheck 1.3.6.1.2.1.242.1.2
                 mapSecurityCheckTable 1.3.6.1.2.1.242.1.2.1 no-access
The (conceptual) table containing information on MAP security checks. This table can be used for statistics on the number of invalid packets that have been identified.
                     mapSecurityCheckEntry 1.3.6.1.2.1.242.1.2.1.1 no-access
Each entry in this table contains information on a particular MAP security check.
                         mapSecurityCheckInvalidv4 1.3.6.1.2.1.242.1.2.1.1.1 counter64 read-only
Indicates the number of received IPv4 packets that do not have a payload source IPv4 address or port within the range defined in the matching MAP rule. It corresponds to the second kind of invalid packet described in Section 4.1.2.
                         mapSecurityCheckInvalidv6 1.3.6.1.2.1.242.1.2.1.1.2 counter64 read-only
Indicates the number of received IPv6 packets that do not have a source or destination IPv6 address matching a Basic Mapping Rule. It corresponds to the first kind of invalid packet described in Section 4.1.2.
         mapMIBConformance 1.3.6.1.2.1.242.2
             mapMIBCompliances 1.3.6.1.2.1.242.2.1
                 mapMIBCompliance 1.3.6.1.2.1.242.2.1.1
Describes the minimal requirements for conformance to the MAP-E MIB.
             mapMIBGroups 1.3.6.1.2.1.242.2.2
                 mapMIBRuleGroup 1.3.6.1.2.1.242.2.2.1
The group of objects used to describe the MAP-E mapping rule.
                 mapMIBSecurityGroup 1.3.6.1.2.1.242.2.2.2
The group of objects used to provide information on the MAP-E security checks.