LaserJet-Series-8100-MBM-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: LaserJet-Series-8100-MBM-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hp 1.3.6.1.4.1.11
       nm 1.3.6.1.4.1.11.2
           hpsystem 1.3.6.1.4.1.11.2.3
               net_peripheral 1.3.6.1.4.1.11.2.3.9
                   netdm 1.3.6.1.4.1.11.2.3.9.4
                       dm 1.3.6.1.4.1.11.2.3.9.4.2
                           device 1.3.6.1.4.1.11.2.3.9.4.2.1
                               destination_subsystem 1.3.6.1.4.1.11.2.3.9.4.2.1.4
                                   print_engine 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1
                                       intray 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3
                                           intrays 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3
                                               intray6 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6
                                                   tray6_media_size_loaded 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6.1 integer read-only
Returns the media size that is currently configured in tray #5. Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document. Additional information: If the tray drawer is open, a get on this object will cause a status of to be returned. If the tray is empty, the size that the tray is configured for will be returned Enumeration: 'eUSLetter': 2, 'eUSLegal': 3, 'eISOandJISA4': 26, 'eJISB4': 46.
                                                   tray6_phd 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.6.12 integer read-only
Provides the number of the Paper Handling Device that contains this input tray. Additional information: The internal trays belong to device 0 (base engine), the envelope feeder is considered to be device 1 and the external input devices can number between 2 and 6 depending on individual user configurations.
                                               intray7 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.7
                                                   tray7_media_size_loaded 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.7.1 integer read-only
Returns the media size that is currently configured in tray #5. Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document. Additional information: If the tray drawer is open, a get on this object will cause a status of to be returned. If the tray is empty, the size that the tray is configured for will be returned Enumeration: 'eLedger': 11, 'eJISB4': 46, 'eUSLegal': 3, 'eUSLetter': 2, 'eISOandJISA3': 27, 'eISOandJISA4': 26.
                                                   tray7_phd 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.7.12 integer read-only
Provides the number of the Paper Handling Device that contains this input tray. Additional information: The internal trays belong to device 0 (base engine), the envelope feeder is considered to be device 1 and the external input devices can number between 2 and 6 depending on individual user configurations. NOTE: only TRAY6 and TRAY7 are listed here because HP does not make a device with more than two trays, but the Specification requires support of up to 10 external trays. Therefore the objects for TRAY8-PHD ... TRAY15-PHD will exist if that many trays exist.
                                       outbin 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4
                                           outbins 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3
                                               outbin3 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3
                                                   outbin3_override_mode 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.9 octet string read-write
Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: This object describes the action that is performed when the JOB-OUTPUT-AUTO-CONTINUE-TIMEOUT expires. The action performed by the CONTINUE object being set to eInitiateAction or the GO key being pressed on the control panel may cause different actions. See the CONTINUE object description for information on the actions that occur for those conditions. The cCancelJob item overrides the other two options, if it is set then the job will be canceled regardless of the other settings. If cJobCancel is not set then cBinFullOverride will cause the printer to use the overflow bin (Set by PML object OVERFLOW-BIN)in the case of a bin full condtion. If the cBinderAttentionOverride option is set then the finisher out warning will be displayed but ignored and jobs will continue to go to the finisher anyway. OUTBIN3 is the topmost bin on the output device. This bin replaces the left output bin on the base printer. OUTBIN4 through OUTBIN11 are the additional 8 bins supplied by the MBM8 device. NOTE: Because HP is marketing a device with a max of 9 bins (MBM8) the OUTBIN-OVERRIDE-MODE objects are 3-11 but the external device specification requires support of up to 315 output bins. Therefore if these bins exist above 11, then the coresponding objects will also exist OUTBIN12-OVERRIDE-MODE through OUTBIN317-OVERRIDE-MODE. The data for this object is stored in NVRAM.
                                                   outbin3_maximum_binding 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.10 integer read-only
The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Additional information: This is a read only object that returns the number of 20# pages that this bin can bind(i.e. staple). This number is used by the host applications to prevent jobs that exceed this amount from being sent to this bin. If this bin does not have a finishing function like stapling where this object is necessary the object will return 0. OUTBIN3 is the topmost bin on the output device. This bin replaces the left output bin on the base printer. OUTBIN4 through OUTBIN11 are the additional 8 bins supplied by the MBM8 device. NOTE: Because HP is marketing a device with a max of 9 bins (MBM8) the OUTBINn-MAXIMUM-BINDING objects are 3-11 but the external device specification requires support of up to 315 output bins. Therefore if these bins exist above 11, then the coresponding objects will also exist OUTBIN12-MAXIMUM-BINDING through OUTBIN317-MAXIMUM-BINDING.
                                                   outbin3_phd 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.3.11 integer read-only
Provides the number of the Paper Handling Device that contains this output bin. Additional information: This object will return the the device number that contains this output bin. The envelope feed is considered PHD1 thus this object will return 2-6 depending on where in the device chain the bin exists. OUTBIN3 is the topmost bin on the output device. This bin replaces the left output bin on the base printer. OUTBIN4 through OUTBIN11 are the additional 8 bins supplied by the MBM8 device. NOTE: Because HP is marketing a device with a max of 9 bins (MBM8) the OUTBINn-PHD objects are 3-11 but the external device specification requires support of up to 315 output bins. Therefore if these bins exist above 11, then the coresponding objects will also exist OUTBIN12-PHD through OUTBIN317-PHD.
                                               outbin4 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4
                                                   outbin4_override_mode 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.9 octet string read-write
Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
                                                   outbin4_maximum_binding 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.10 integer read-only
The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Additional information: See OUTBIN3-MAXIMUM-BINDING.
                                                   outbin4_phd 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.4.11 integer read-only
Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.
                                               outbin5 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5
                                                   outbin5_override_mode 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.9 octet string read-write
Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
                                                   outbin5_maximum_binding 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.10 integer read-only
The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Additional information: See OUTBIN3-MAXIMUM-BINDING.
                                                   outbin5_phd 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.5.11 integer read-only
Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.
                                               outbin6 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6
                                                   outbin6_override_mode 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6.9 octet string read-write
Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
                                                   outbin6_maximum_binding 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6.10 integer read-only
The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Additional information: See OUTBIN3-MAXIMUM-BINDING.
                                                   outbin6_phd 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.6.11 integer read-only
Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.
                                               outbin7 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7
                                                   outbin7_override_mode 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7.9 octet string read-write
Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
                                                   outbin7_maximum_binding 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7.10 integer read-only
The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Additional information: See OUTBIN3-MAXIMUM-BINDING.
                                                   outbin7_phd 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.7.11 integer read-only
Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.
                                               outbin8 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8
                                                   outbin8_override_mode 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8.9 octet string read-write
Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
                                                   outbin8_maximum_binding 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8.10 integer read-only
The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Additional information: See OUTBIN3-MAXIMUM-BINDING.
                                                   outbin8_phd 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.8.11 integer read-only
Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.
                                               outbin9 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9
                                                   outbin9_override_mode 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.9 octet string read-write
Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
                                                   outbin9_maximum_binding 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.10 integer read-only
The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Additional information: See OUTBIN3-MAXIMUM-BINDING.
                                                   outbin9_phd 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.9.11 integer read-only
Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.
                                               outbin10 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.10
                                                     outbin10_override_mode 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.10.9 octet string read-write
Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
                                                     outbin10_maximum_binding 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.10.10 integer read-only
The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Additional information: See OUTBIN3-MAXIMUM-BINDING.
                                                     outbin10_phd 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.10.11 integer read-only
Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.
                                               outbin11 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.11
                                                     outbin11_override_mode 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.11.9 octet string read-write
Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores the attention condition and continues printing. cBinderAttentionOverride - The device ignores the binder attention condition and continues printing. Additional information: See OUTBIN3-OVERRIDE-MODE.
                                                     outbin11_maximum_binding 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.11.10 integer read-only
The maximum number of sheets of 20 pound paper that can be bound by the binding device that serves this output bin. If a job exceeds this number and the job has requested binding, cBindingError will be set in NOT- READY-DESTINATION-PRINT-ENGINE. Additional information: See OUTBIN3-MAXIMUM-BINDING.
                                                     outbin11_phd 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.4.3.11.11 integer read-only
Provides the number of the Paper Handling Device that contains this output bin. Additional information: See OUTBIN3-PHD.
                           printmib 1.3.6.1.4.1.11.2.3.9.4.2.2
                               prtInput 1.3.6.1.4.1.11.2.3.9.4.2.2.8
                                   prtInputTable 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2
                                       prtInputEntry 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1
                                           prtinputtype 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2 integer read-only
The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for a descriptor field to further qualify the other choice. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Tray 1 is the multi-purpose tray and is always present. It supports both sheets and envelopes. Its type is ePsheetFeedAutoNonRemovableTray. Tray 2 is a removable tray that comes standard with the printer, although it is usually not removed from the printer. It is of type ePsheetFeedAutoRemovableTray. Tray 3 is a removable tray that comes standard with the printer, although it is usually not removed from the printer. It is of type ePsheetFeedAutoRemovableTray. The 4th tray in this array is the envelope feeder. It can be detected even when it is installed while the printer is powered on. Tray 6 and Tray 7 are the Multiple Input tray device, and it must be installed before the printer is powered on. They are of type ePsheetFeedAutoRemovableTray. Enumeration: 'ePsheetFeedAutoNonRemovableTray': 4, 'ePsheetFeedAutoRemovableTray': 3.
                                           prtinputdimunit 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3 integer read-only
The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Following is a table of paper sizes and dimensions for each paper size supported by Yukon: Size Inches (ten-thousandths) Millimeters Feed x Cross-Feed Feed x Cross-Feed --------------- ------------------------ ----------- eUSExecutive 105000 x 72500 266700 x 184150 eUSLetter 85000 x 110000 215900 x 279400 eUSLegal 140000 x 85000 355600 x 215900 eLedger 170000 x 110000 431800 x 279400 eROC16K 107500 x 77500 273050 x 19685 eJISExecutive 130000 x 85000 330000 x 216000 eROC8K 155000 x 107500 393700 x 273050 eISOandJISA5 82677 x 58268 210000 x 148000 eISOandJISA4 82677 x 116929 210000 x 297000 eJISB4 143307 x 101181 364000 x 257000 eJISB5 101181 x 71654 257000 x 182000 eISOandJISA3 165354 x 116929 420000 x 297000 eMonarch 75000 x 38750 190500 x 98425 eCommercial10 95000 x 41250 241300 x 104775 eInternationalDL 86614 x 43307 220000 x 110000 eInternationalC5 90157 x 63780 229000 x 162000 eInternationalB5 98425 x 69291 250000 x 176000 eJapanesePostcardDouble 78740 x 58268 200000 x 148000 eCustom 177000 x 117000(max) 449580 x 297180(max) Enumeration: 'ePtenThousandthsOfInches': 3, 'ePmicrometers': 4.
                                           prtinputmediadimfeeddirdeclared 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4 integer read-write
This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The feed direction is the direction in which the media is fed on this sub-unit. This dimension is measured in input sub-unit dimensional units (prtInputDimUnit). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests. Otherwise, the value may be changed. The value (-1) means other and specifically means that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: For trays 2, 3, 6 and 7 (which can reliably sense this value) these objects behave exactly the same as prtInputMediaDimFeedDirChosen. Attempting to set the objects for tray 2, 3, 6 or 7 will cause to be returned. The default values assume the trays are configured for letter size paper (or COM10, in the case of the envelope feeder). For tray 1, the value is the dimension for the media size currently declared. For the envelope feeder (tray 4), the value is the dimension for the media size currently declared. Valid values are 0 to 268435455. If a value within 0.2 inches of a standard size (e.g. 85001) is chosen when setting these objects, the standard size will be set for the specified tray if the value of prtInputMediaDimXFeedDirDeclared is also set to within 0.2 inches of the same standard size. If the value is not within 0.2 inches, Custom will be chosen as the size if it is supported by the specified tray, otherwise the first available standard size for the tray will be selected.
                                           prtinputmediadimxfeeddirdeclared 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 integer read-write
This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The cross feed direction is ninety degrees relative to the feed direction associated with this sub-unit. This dimension is measured in input sub-unit dimensional units (prtInputDimUnit). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests. Otherwise, the value may be changed. The value (-1) means other and specifically means that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: For trays 2, 3, 6 and 7 (which can reliably sense this value) these objects behave exactly the same as prtInputMediaDimFeedDirChosen. Attempting to set the objects for tray 2, 3, 6 or 7 will cause to be returned. The default values assume the trays are configured for letter size paper (or COM10, in the case of the envelope feeder). For tray 1, the value is the dimension for the media size currently declared. For the envelope feeder (tray 4), the value is the dimension for the media size currently declared. Valid values are 0 to 268435455. If a value within 0.2 inches of a standard size (e.g. 85001) is chosen when setting these objects, the standard size will be set for the specified tray if the value of prtInputMediaDimXFeedDirDeclared is also set to within 0.2 inches of the same standard size. If the value is not within 0.2 inches, Custom will be chosen as the size if it is supported by the specified tray, otherwise the first available standard size for the tray will be selected.
                                           prtinputmediadimfeeddirchosen 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6 integer read-only
The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. Feed dimension measurements are taken relative to the feed direction associated with that sub-unit and are in input sub-unit dimensional units (MediaUnit). If the printer supports the declared dimension, the granted dimension is the same as the declared dimension. If not, the granted dimension is set to the closest dimension that the printer supports when the declared dimension is set. The value (-1) means other and specifically indicates that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: The objects for trays 2, 3, 6 and 7 reflect the configuration of the corresponding trays. When the tray is removed, a value of -2 is returned. The default values assume the trays are configured for letter size paper (or COM10, in the case of the envelope feeder). For tray 1 and the envelope feeder, the object returns the value of the media size for which the tray is currently configured because those trays cannot sense what size media they contain.
                                           prtinputmediadimxfeeddirchosen 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 integer read-only
The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. The cross feed direction is ninety degrees relative to the feed direction associated with this sub-unit. This dimension is measured in input sub-unit dimensional units (MediaUnit). If the printer supports the declared dimension, the granted dimension is the same as the declared dimension. If not, the granted dimension is set to the closest dimension that the printer supports when the declared dimension is set. The value (-1) means other and specifically indicates that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: The objects for trays 2, 3, 6 and 7 reflect the configuration of the corresponding trays. When the tray is removed, a value of -2 is returned. The default values assume the trays are configured for letter size paper (or COM10, in the case of the envelope feeder). For tray 1 and the envelope feeder, the object returns the value of the media size for which the tray is currently configured because those trays cannot sense what size media they contain.
                                           prtinputcapacityunit 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8 integer read-only
The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: A sheet is a single piece of 20 pound paper. For tray 4, the envelope feeder, a sheet is one envelope Enumeration: 'ePsheets': 8.
                                           prtinputmaxcapacity 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9 integer read-only
The maximum capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value reflects claimed capacity. If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Control Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML TRAYn-MAXIMUM-CAPACITY. This is specified assuming 20 pound paper for the paper trays.
                                           prtinputcurrentlevel 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10 integer read-only
The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Contol Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. The value (-3) means that the printer knows that at least one unit remains. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Koala & Yukon can detect tray level within roughly 25% for trays 2, 3, 6, & 7. For Trays 1 and 4, -3 will be returned if the tray is not empty, and 0 will be returned if the tray is empty. If a tray is removed, a value of -2 (unknown) will be returned.
                                           prtinputstatus 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11 integer read-only
The current status of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML STATUS-TRAY-MISSING and STATUS-TRAY-EMPTY. Values returned by the firmware are detailed in the following table. 'Value Or'd Due To Condition' indicates that the specified value will be logically or'd into the value for this object when the specified Condition occurs. Condition Value Or'd Due To Condition ----------------------- ------------------------ Tray Lifter Error 1 + 2 Tray not installed or not inserted or empty 1 Tray is current source tray 4 + 2 Tray involved in paper mount 16 + 32 Value 3 or 1 is Or'd in 8 Tray is lifting 64
                                           prtinputmedianame 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12 octet string read-write
A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This description is not processed by the printer. It is used to provide information not expressible in terms of the other media attributes (e.g. prtInputMediaDimFeedDirChosen, prtInputMediaDimXFeedDirChosen, prtInputMediaWeight, prtInputMediaType). An example would be `legal tender bond paper'. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML TRAYn-MEDIA-NAME. If set to a string other than one contained by a MEDIAn-NAME object, a status of is returned. If set to a string that is unsupported for the specified tray object, a status of is returned. In future printers, cassette trays will not support Transparency or Label media types. The value of this object is saved across a power cycle.
                                           prtinputname 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13 octet string read-only
The name assigned to this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML TRAYn-NAME.
                                           prtinputvendorname 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14 octet string read-only
The vendor name of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB.
                                           prtinputmodel 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15 octet string read-only
The model name of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: MoBY does not specify a model name for Tray 1, 2 or 3
                                           prtinputversion 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16 octet string read-only
The version of this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Yukon does not specify a version number for the input trays.
                                           prtinputserialnumber 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17 octet string read-only
The serial number assigned to this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Yukon does not specify a serial number for the input trays.
                                           prtinputdescription 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18 octet string read-only
A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB.
                                           prtinputsecurity 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19 integer read-only
Indicates if this input sub-unit has some security associated with it. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: No security mechanism provided. Enumeration: 'ePother': 1, 'ePon': 3, 'ePnotPresent': 5, 'ePoff': 4.
                                           prtinputmedialoadtimeout 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24 integer read-only
When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer will wait for the duration (in seconds) specified by this object. Upon expiration of the timeout, the printer will take the action specified by prtInputNextIndex. The event which causes the printer to enter the waiting state is product specific. If the printer is not waiting for manually fed media, it may switch from an empty subunit to a different subunit without waiting for the timeout to expire. A value of (-1) implies 'other' or 'infinite' which translates to 'wait forever'. The action which causes printing to continue is product specific. A value of (-2) implies 'unknown'. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: This object simply reflects the value of the JOB-INPUT-AUTO-CONTINUE-TIMEOUT object. See the description of that object for additional information.
                                           prtinputnextindex 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.26 integer read-only
The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeout specified by prtInputMediaLoadTimeout expires. A value of zero(0) indicates that auto input switching will not occur when this input subunit is emptied. If the timeout specified by prtInputLoadMediaTimeout expires and this value is zero(0), the job will be aborted. A value of (-1) means other. The value (-2) means 'unknown' and specifically indicates that an implementation specific method will determine the next input subunit to use at the time this subunit is emptied and the timeout expires. The value(-3) means input switching is not supported for this subunit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: This object reflects the state of JOB-INPUT-AUTO-CONTINUE -MODE and JOB-INPUT-AUTO-CONTINUE-TIMEOUT. If JOB-INPUT-AUTO-CONTINUE-TIMEOUT is set to -1 or JOB-INPUT-AUTO-CONTINUE-MODE is set up to cancel the job, this object will return 0. If JOB-INPUT-AUTO-CONTINUE-TIMEOUT is >= 0 and JOB-INPUT-AUTO-CONTINUE-MODE is not set up to cancel the job, this object will return -2, meaning that a product-specific tray switching action will occur.
                               prtOutput 1.3.6.1.4.1.11.2.3.9.4.2.2.9
                                   prtOutputTable 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2
                                       prtOutputEntry 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1
                                           prtoutputtype 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.2 integer read-only
The type of technology supported by this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Enumeration: 'ePunRemovableBin': 4, 'ePremovableBin': 3.
                                           prtoutputcapacityunit 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.3 integer read-only
The unit of measurement for use in calculating and relaying capacity values for this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: A sheet is a single piece of 20 pound paper. Enumeration: 'ePsheets': 8.
                                           prtoutputmaxcapacity 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.4 integer read-only
The maximum capacity of this output sub-unit in output sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value essentially reflects claimed capacity. If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Control Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML OUTBINn-MAXIMUM-CAPACITY. Output sub-unit 2 is not supported if any output paper handling device is attached. The capacity of sub-unit 4 depends on the mode of operation. The capcities are as follows: Stacker: OutBin3: 100 OutBin4: 2000 (sub-units 5-15 do not exist) Job Separator: OutBin3: 100 OutBin4: 2000 Mailbox: OutBin3: 100 (this is the default mode) OutBin4: 250 OutBin5: 250 OutBin6: 250 OutBin7: 250 OutBin8: 250 OutBin9: 250 OutBin10: 250 OutBin11: 250
                                           prtoutputremainingcapacity 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.5 integer read-only
The remaining capacity of the possible output sub-unit capacity in output sub-unit capacity units (PrtCapacityUnitTC) of this output sub-unit. If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be modified by management requests; otherwise, the value may be written (by a Remote Control Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. The value (-3) means that the printer knows that there remains capacity for at least one unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML NOT-READY-OUTBIN-FULL and STATUS-OUTBIN-FULL. The values reported for output sub-unit 1 (face-down, top bin) will be either (-3) if it is not full or (0) if it is full. The first output sub-unit (3) of the MBM reports either (-3) if it is not full or (0) if it is full. In mailbox mode, the MBM sub-units (4-11) will report (250) when empty, (0) when full. Note: Due to MBM mechanism limitations, the value reported may not always be accurate (the bin status is detected only when the media delivery head is moved to or past a physical bin). Also, for stacker mode a bin is considered full as long as any bin above it is not empty. Default values assume all sub-units are empty and the MBM is in mailbox mode.
                                           prtoutputstatus 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.6 integer read-only
The current status of this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML NOT-READY-OUTBIN-MISSING and STATUS-OUTBIN-MISSING. The default values assume all bins are empty. See SubUnitStatus in RFC1759 Printer MIB for details on values reported by this object. Yukon will not include values Available and Standby (2), Available and Active (4), Unknown (5) or Transitioning to intended state (64). Values returned by the firmware are detailed in the following table. 'Value Or'd Due To Condition' indicates that the specified value will be logically or'd into the value for this object when the specified Condition occurs. Condition Value Or'd Due To Condition ---------------------------- --------------------------- Binder Error 1 + 2 Bin full, binder empty, bind limit reached, binder align error, bin attention error, or bin attention warning 1 Bin is current bin and paper is moving 4 + 2 Bin is the bin responsible for Bin Full error message being displayed 16 + 32 Value 1 or 3 is Or'd in 8
                                           prtoutputname 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.7 octet string read-write
The name assigned to this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML OUTBINn-NAME. The characters must be in the range 20H to 7FH except 5C cannot be used. When this string is displayed on the control panel the Roman-8 symbol set is used. Factory default bin names are localized, but users can rename the output bins. The STANDARD OUTBIN cannot be renamed, but all of the optional outbins can.
                                           prtoutputvendorname 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.8 octet string read-only
The vendor name of this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB.
                                           prtoutputmodel 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.9 octet string read-only
The name assigned to this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: The value returned by the MBM depends on the current mode of the device. The possible values are as follows: MULTIBIN MAILBOX MBM-8 C4785B MULTIBIN MAILBOX MBM-5S C4787A STAPLER MODULE C3766A
                                           prtoutputversion 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.10 octet string read-only
The version of this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Returns device-specific information about the configuration of the output bin. May include information about the type of processing that can be done to media sent to this bin; processing includes but is not limited to binding, punching, folding and sealing. Format of this object is specified by the output device documentation.
                                           prtoutputserialnumber 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.11 octet string read-only
The serial number assigned to this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Yukon does not support a serial number for output devices.
                                           prtoutputdescription 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.12 octet string read-only
A free-form text description of this output sub-unit in the localization specified by prtGeneralCurrentLocalization. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: This object returns the exact same string as prtOutputName. The factory default bin names are localized, but users have the ability to rename them.
                                           prtoutputsecurity 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.13 integer read-only
Indicates if this output sub-unit has some security associated with it and if that security is enabled or not. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: No security mechanism provided. Enumeration: 'ePother': 1, 'ePon': 3, 'ePnotPresent': 5, 'ePoff': 4.
                                           prtoutputdimunit 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.14 integer read-only
The unit of measurement for use in calculating and relaying dimensional values for this output sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: See the description for prtInputDimUnit for a table of dimensions for supported paper sizes for Yukon. Enumeration: 'ePtenThousandthsOfInches': 3, 'ePmicrometers': 4.
                                           prtoutputmaxdimfeeddir 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.15 integer read-only
The maximum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (MediaUnit). If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed with management protocol operations. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: The value returned by this object depends on the value of prtOutputDimUnit. For example, for the built-in output bins, it is 177000 if prtOutputDimUnit is ePtenThousandthsOfInches or 450000 if prtOutputDimUnit is ePmicrometers. 177000 is the largest custom size supported by Yukon. 170000 is the long dimension of Ledger paper, the largest dimension supported by an output device.
                                           prtoutputmaxdimxfeeddir 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.16 integer read-only
The maximum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (MediaUnit). If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed with management protocol operations. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: The value returned by this object depends on the value of prtOutputDimUnit. For example, for the built-in output bins, it is 117000 if prtOutputDimUnit is ePtenThousandthsOfInches and 297180 if prtOutputDimUnit is ePmicrometers.
                                           prtoutputmindimfeeddir 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.17 integer read-only
The minimum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (DimUnit). If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed with management protocol operations. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: The value returned by this object depends on the value of prtOutputDimUnit. For example, for the built-in output bins, it is 75000 if prtOutputDimUnit is ePtenThousandthsOfInches or 190500 if prtOutputDimUnit is ePmicrometers.
                                           prtoutputmindimxfeeddir 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.18 integer read-only
The minimum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in output sub-unit dimensional units (DimUnit). If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed with management protocol operations. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: The value returned by this object depends on the value of prtOutputDimUnit. For example, for the built-in output trays, it is 38700 if prtOutputDimUnit is ePtenThousandthsOfInches or 98298 if prtOutputDimUnit is ePmicrometers.
                                           prtoutputstackingorder 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.19 integer read-only
The current state of the stacking order for the associated output sub-unit. `FirstToLast' means that as pages are output the front of the next page is placed against the back of the previous page. `LasttoFirst' means that as pages are output the back of the next page is placed against the front of the previous page. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Replaces PML OUTBINn-STACK-ORDER. Enumeration: 'ePunknown': 2, 'ePfirstToLast': 3, 'ePlastToFirst': 4.
                                           prtoutputpagedeliveryorientation 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.20 integer read-only
The reading surface that will be `up' when pages are delivered to the associated output sub-unit. Values are faceUp and faceDown. (Note: interpretation of these values is in general context-dependent based on locale; presentation of these values to an end-user should be normalized to the expectations of the user). Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Enumeration: 'ePfaceDown': 4, 'ePfaceUp': 3.
                                           prtoutputbursting 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.21 integer read-only
This object indicates that the outputting sub-unit supports bursting, and if so, whether the feature is enabled. Bursting is the process by which continuous media is separated into individual sheets, typically by bursting along pre-formed perforations. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Bursting is not supported. Enumeration: 'ePother': 1, 'ePon': 3, 'ePnotPresent': 5, 'ePoff': 4.
                                           prtoutputdecollating 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.22 integer read-only
This object indicates that the output supports supports decollating, and if so, whether the feature is enabled. Decollating is the process by which the individual parts within a multi-part form are separated and sorted into separate stacks for each part. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Decollating is not supported. Enumeration: 'ePother': 1, 'ePon': 3, 'ePnotPresent': 5, 'ePoff': 4.
                                           prtoutputpagecollated 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.23 integer read-only
This object indicates that the output sub-unit supports page collation, and if so, whether the feature is enabled. See glossary for definition of how this document defines collation. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Page collation is not supported. Enumeration: 'ePother': 1, 'ePon': 3, 'ePnotPresent': 5, 'ePoff': 4.
                                           prtoutputoffsetstacking 1.3.6.1.4.1.11.2.3.9.4.2.2.9.2.1.24 integer read-only
This object indicates that the output supports supports offset stacking, and if so, whether the feature is enabled. See glossary for how Offset Stacking is defined by this document. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib-031698.txt, for more details in the Standard Printer MIB. Additional information: Offset stacking is not supported. Enumeration: 'ePother': 1, 'ePon': 3, 'ePnotPresent': 5, 'ePoff': 4.