LLDP-EXT-DOT1-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: LLDP-EXT-DOT1-MIB
Download as:   
SNMPv2-CONF, LLDP-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lldpXdot1MIB 1.0.8802.1.1.2.1.5.32962
The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXdot1MIB is branched from lldpExtensions using OUI value as the node. An OUI/'company_id' is a 24 bit globally unique assigned number referenced by various standards. Copyright (C) IEEE (2005). This version of this MIB module is published as Annex F.7.1 of IEEE Std 802.1AB-2005; see the standard itself for full legal notices.
             lldpXdot1Objects 1.0.8802.1.1.2.1.5.32962.1
                 lldpXdot1Config 1.0.8802.1.1.2.1.5.32962.1.1
                     lldpXdot1ConfigPortVlanTable 1.0.8802.1.1.2.1.5.32962.1.1.1 no-access
A table that controls selection of LLDP Port VLAN-ID TLVs to be transmitted on individual ports.
                         lldpXdot1ConfigPortVlanEntry 1.0.8802.1.1.2.1.5.32962.1.1.1.1 no-access
LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Port VLAN-ID TLV on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system.
                             lldpXdot1ConfigPortVlanTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.1.1.1 truthvalue read-write
The lldpXdot1ConfigPortVlanTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined port VLAN TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                     lldpXdot1ConfigVlanNameTable 1.0.8802.1.1.2.1.5.32962.1.1.2 no-access
The table that controls selection of LLDP VLAN name TLV instances to be transmitted on individual ports.
                         lldpXdot1ConfigVlanNameEntry 1.0.8802.1.1.2.1.5.32962.1.1.2.1 no-access
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System VLAN name instance will be transmitted. This configuration object augments the lldpLocVlanEntry, therefore it is only present along with the VLAN Name instance contained in the associated lldpLocVlanNameEntry entry. Each active lldpXdot1ConfigVlanNameEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocVlanNameEntry) after a re-initialization of the management system.
                             lldpXdot1ConfigVlanNameTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.2.1.1 truthvalue read-write
The boolean value that indicates whether the corresponding Local System VLAN name instance will be transmitted on the port defined by the given lldpXdot1LocVlanNameEntry. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                     lldpXdot1ConfigProtoVlanTable 1.0.8802.1.1.2.1.5.32962.1.1.3 no-access
The table that controls selection of LLDP Port and Protocol VLAN ID TLV instances to be transmitted on individual ports.
                         lldpXdot1ConfigProtoVlanEntry 1.0.8802.1.1.2.1.5.32962.1.1.3.1 no-access
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol VLAN instance will be transmitted. This configuration object augments the lldpXdot1LocVlanEntry, therefore it is only present along with the Port and Protocol VLAN ID instance contained in the associated lldpXdot1LocVlanEntry entry. Each active lldpXdot1ConfigProtoVlanEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocProtoVlanEntry) after a re-initialization of the management system.
                             lldpXdot1ConfigProtoVlanTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.3.1.1 truthvalue read-write
The boolean value that indicates whether the corresponding Local System Port and Protocol VLAN instance will be transmitted on the port defined by the given lldpXdot1LocProtoVlanEntry. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                     lldpXdot1ConfigProtocolTable 1.0.8802.1.1.2.1.5.32962.1.1.4 no-access
The table that controls selection of LLDP Protocol TLV instances to be transmitted on individual ports.
                         lldpXdot1ConfigProtocolEntry 1.0.8802.1.1.2.1.5.32962.1.1.4.1 no-access
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol instance will be transmitted. This configuration object augments the lldpXdot1LocProtoEntry, therefore it is only present along with the Protocol instance contained in the associated lldpXdot1LocProtoEntry entry. Each active lldpXdot1ConfigProtocolEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocProtocolEntry) after a re-initialization of the management system.
                             lldpXdot1ConfigProtocolTxEnable 1.0.8802.1.1.2.1.5.32962.1.1.4.1.1 truthvalue read-write
The boolean value that indicates whether the corresponding Local System Protocol Identity instance will be transmitted on the port defined by the given lldpXdot1LocProtocolEntry. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                 lldpXdot1LocalData 1.0.8802.1.1.2.1.5.32962.1.2
                     lldpXdot1LocTable 1.0.8802.1.1.2.1.5.32962.1.2.1 no-access
This table contains one row per port for IEEE 802.1 organizationally defined LLDP extension on the local system known to this agent.
                         lldpXdot1LocEntry 1.0.8802.1.1.2.1.5.32962.1.2.1.1 no-access
Information about IEEE 802.1 organizationally defined LLDP extension.
                             lldpXdot1LocPortVlanId 1.0.8802.1.1.2.1.5.32962.1.2.1.1.1 integer32 read-only
The integer value used to identify the port's VLAN identifier associated with the local system. A value of zero shall be used if the system either does not know the PVID or does not support port-based VLAN operation.
                     lldpXdot1LocProtoVlanTable 1.0.8802.1.1.2.1.5.32962.1.2.2 no-access
This table contains one or more rows per Port and Protocol VLAN information about the local system.
                         lldpXdot1LocProtoVlanEntry 1.0.8802.1.1.2.1.5.32962.1.2.2.1 no-access
Port and protocol VLAN ID Information about a particular port component. There may be multiple port and protocol VLANs, identified by a particular lldpXdot1LocProtoVlanId, configured on the given port.
                             lldpXdot1LocProtoVlanId 1.0.8802.1.1.2.1.5.32962.1.2.2.1.1 integer32 no-access
The integer value used to identify the port and protocol VLANs associated with the given port associated with the local system. A value of zero shall be used if the system either does not know the protocol VLAN ID (PPVID) or does not support port and protocol VLAN operation.
                             lldpXdot1LocProtoVlanSupported 1.0.8802.1.1.2.1.5.32962.1.2.2.1.2 truthvalue read-only
The truth value used to indicate whether the given port (associated with the local system) supports port and protocol VLANs.
                             lldpXdot1LocProtoVlanEnabled 1.0.8802.1.1.2.1.5.32962.1.2.2.1.3 truthvalue read-only
The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the local system.
                     lldpXdot1LocVlanNameTable 1.0.8802.1.1.2.1.5.32962.1.2.3 no-access
This table contains one or more rows per IEEE 802.1Q VLAN name information on the local system known to this agent.
                         lldpXdot1LocVlanNameEntry 1.0.8802.1.1.2.1.5.32962.1.2.3.1 no-access
VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpXdot1LocVlanId, configured on the given port.
                             lldpXdot1LocVlanId 1.0.8802.1.1.2.1.5.32962.1.2.3.1.1 vlanid no-access
The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible.
                             lldpXdot1LocVlanName 1.0.8802.1.1.2.1.5.32962.1.2.3.1.2 snmpadminstring read-only
The string value used to identify VLAN name identified by the Vlan Id associated with the given port on the local system. This object should contain the value of the dot1QVLANStaticName object (defined in IETF RFC 2674) identified with the given lldpXdot1LocVlanId.
                     lldpXdot1LocProtocolTable 1.0.8802.1.1.2.1.5.32962.1.2.4 no-access
This table contains one or more rows per protocol identity information on the local system known to this agent.
                         lldpXdot1LocProtocolEntry 1.0.8802.1.1.2.1.5.32962.1.2.4.1 no-access
Information about particular protocols that are accessible through the given port component. There may be multiple protocols, identified by particular lldpXdot1ProtocolIndex, and lldpLocPortNum.
                             lldpXdot1LocProtocolIndex 1.0.8802.1.1.2.1.5.32962.1.2.4.1.1 integer32 no-access
This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.
                             lldpXdot1LocProtocolId 1.0.8802.1.1.2.1.5.32962.1.2.4.1.2 octet string read-only
The octet string value used to identify the protocols associated with the given port of the local system.
                 lldpXdot1RemoteData 1.0.8802.1.1.2.1.5.32962.1.3
                     lldpXdot1RemTable 1.0.8802.1.1.2.1.5.32962.1.3.1 no-access
This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpXdot1RemEntry is present for each local port, or it may choose to maintain multiple lldpXdot1RemEntries for the same local port.
                         lldpXdot1RemEntry 1.0.8802.1.1.2.1.5.32962.1.3.1.1 no-access
Information about a particular port component.
                             lldpXdot1RemPortVlanId 1.0.8802.1.1.2.1.5.32962.1.3.1.1.1 integer32 read-only
The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not support port-based VLAN operation, the value of lldpXdot1RemPortVlanId should be zero.
                     lldpXdot1RemProtoVlanTable 1.0.8802.1.1.2.1.5.32962.1.3.2 no-access
This table contains one or more rows per Port and Protocol VLAN information about the remote system, received on the given port.
                         lldpXdot1RemProtoVlanEntry 1.0.8802.1.1.2.1.5.32962.1.3.2.1 no-access
Port and protocol VLAN name Information about a particular port component. There may be multiple protocol VLANs, identified by a particular lldpXdot1RemProtoVlanId, configured on the remote system.
                             lldpXdot1RemProtoVlanId 1.0.8802.1.1.2.1.5.32962.1.3.2.1.1 integer32 no-access
The integer value used to identify the port and protocol VLANs associated with the given port associated with the remote system. If port and protocol VLANs are not supported on the given port associated with the remote system, or if the port is not enabled with any port and protocol VLAN, the value of lldpXdot1RemProtoVlanId should be zero.
                             lldpXdot1RemProtoVlanSupported 1.0.8802.1.1.2.1.5.32962.1.3.2.1.2 truthvalue read-only
The truth value used to indicate whether the given port (associated with the remote system) is capable of supporting port and protocol VLANs.
                             lldpXdot1RemProtoVlanEnabled 1.0.8802.1.1.2.1.5.32962.1.3.2.1.3 truthvalue read-only
The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the remote system.
                     lldpXdot1RemVlanNameTable 1.0.8802.1.1.2.1.5.32962.1.3.3 no-access
This table contains one or more rows per IEEE 802.1Q VLAN name information about the remote system, received on the given port.
                         lldpXdot1RemVlanNameEntry 1.0.8802.1.1.2.1.5.32962.1.3.3.1 no-access
VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpXdot1RemVlanId, received on the given port.
                             lldpXdot1RemVlanId 1.0.8802.1.1.2.1.5.32962.1.3.3.1.1 vlanid no-access
The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port of the remote system is compatible.
                             lldpXdot1RemVlanName 1.0.8802.1.1.2.1.5.32962.1.3.3.1.2 snmpadminstring read-only
The string value used to identify VLAN name identified by the VLAN Id associated with the remote system.
                     lldpXdot1RemProtocolTable 1.0.8802.1.1.2.1.5.32962.1.3.4 no-access
This table contains one or more rows per protocol information about the remote system, received on the given port.
                         lldpXdot1RemProtocolEntry 1.0.8802.1.1.2.1.5.32962.1.3.4.1 no-access
Protocol information about a particular port component. There may be multiple protocols, identified by a particular lldpXdot1ProtocolIndex, received on the given port.
                             lldpXdot1RemProtocolIndex 1.0.8802.1.1.2.1.5.32962.1.3.4.1.1 integer32 no-access
This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.
                             lldpXdot1RemProtocolId 1.0.8802.1.1.2.1.5.32962.1.3.4.1.2 octet string read-only
The octet string value used to identify the protocols associated with the given port of remote system.
             lldpXdot1Conformance 1.0.8802.1.1.2.1.5.32962.2
                 lldpXdot1Compliances 1.0.8802.1.1.2.1.5.32962.2.1
                     lldpXdot1Compliance 1.0.8802.1.1.2.1.5.32962.2.1.1
The compliance statement for SNMP entities which implement the IEEE 802.1 organizationally defined LLDP extension MIB.
                 lldpXdot1Groups 1.0.8802.1.1.2.1.5.32962.2.2
                     lldpXdot1ConfigGroup 1.0.8802.1.1.2.1.5.32962.2.2.1
The collection of objects which are used to configure the IEEE 802.1 organizationally defined LLDP extension implementation behavior. This group is mandatory for agents which implement the IEEE 802.1 organizationally defined LLDP extension.
                     lldpXdot1LocSysGroup 1.0.8802.1.1.2.1.5.32962.2.2.2
The collection of objects which are used to represent IEEE 802.1 organizationally defined LLDP extension associated with the Local Device Information. This group is mandatory for agents which implement the IEEE 802.1 organizationally defined LLDP extension in the TX mode.
                     lldpXdot1RemSysGroup 1.0.8802.1.1.2.1.5.32962.2.2.3
The collection of objects which are used to represent LLDP 802.1 organizational extension Local Device Information. This group is mandatory for agents which implement the LLDP 802.1 organizational extension in the RX mode.