LIVINGSTON-PM4-MIB: View SNMP OID List / Download MIB

VENDOR: LIVINGSTON ENTERPRISES


 Home MIB: LIVINGSTON-PM4-MIB
Download as:   
SNMPv2-CONF, SNMPv2-MIB, LIVINGSTON-ROOT-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lucentPM4Mib 1.3.6.1.4.1.307.1.1.2.1
     lucentPM4MibRev 1.3.6.1.4.1.307.1.1.2.1.1 displaystring read-only
This object specifies the current MIB revision number. Example of the MIB revision can be PM4xxx for PM4 product and PM3xxx for PM3 products etc. Where xxx can be any combination of alpha-numeric characters.
     lucentPM4SWRev 1.3.6.1.4.1.307.1.1.2.1.2 displaystring read-only
This object specifies the ComOS revision number. Example of the ComOS revision can be ComOS4.xx. Where xxx can be any combination of alpha-numeric characters.
     lucentPM4Chassis 1.3.6.1.4.1.307.1.1.2.1.3
         lucentPM4ChasSummary 1.3.6.1.4.1.307.1.1.2.1.3.1 displaystring read-only
This object provides general information about the PortMaster 4 chassis operational status. This object is read-only. The DisplayString represents a summary of all the devices in the chassis as follows: Bytes 1 - 2 '0''0' Byte 3 'U', 'D', 'M', 'F', 'O' Byte 4 space Bytes 5 - 6 '0''1' Byte 7 'U', 'D', 'M', 'F', 'O' Byte 8 space Bytes 9 - 10 '0''2' Byte 11 'U', 'D', 'M', 'F', 'O' Byte 12 space Bytes 13 - 14 '0''3' Byte 15 'U', 'D', 'M', 'F', 'O' Byte 16 space Bytes 17 - 18 '0''4' Byte 19 'U', 'D', 'M', 'F', 'O' Byte 20 space Bytes 21 - 22 '0''5' Byte 23 'U', 'D', 'M', 'F', 'O' Byte 24 space Bytes 25 - 26 '0''6' Byte 27 'U', 'D', 'M', 'F', 'O' Byte 28 space Bytes 29 - 30 '0''7' Byte 31 'U', 'D', 'M', 'F', 'O' Byte 32 space Bytes 33 - 34 '0''8' Byte 35 'U', 'D', 'M', 'F', 'O' Byte 36 space Bytes 37 - 38 '0''9' Byte 39 'U', 'D', 'M', 'F', 'O' Byte 40 space Bytes 41 - 42 '1''0' Byte 43 'U', 'D', 'M', 'F', 'O' Byte 44 space Bytes 45 - 46 '1''1' Byte 47 'U', 'D', 'M', 'F', 'O' Byte 48 space Bytes 49 - 50 '1''2' Byte 51 'U', 'D', 'M', 'F', 'O' Byte 52 space Bytes 53 - 54 '1''3' Byte 55 'U', 'D', 'M', 'F', 'O' Byte 56 space Bytes 57 - 58 '1''4' Byte 59 'U', 'D', 'M', 'F', 'O' Byte 60 space Bytes 61 - 62 '1''5' Byte 63 'U', 'D', 'M', 'F', 'O' Byte 64 space Bytes 65 - 66 'P''1' Byte 67 'U', 'D', 'M', 'F', 'O' Byte 68 space Bytes 69 - 70 'P''2' Byte 71 'U', 'D', 'M', 'F', 'O' Byte 72 space Bytes 73 - 74 'P''3' Byte 75 'U', 'D', 'M', 'F', 'O' Byte 76 space Bytes 77 - 78 'D''1' Byte 79 'U', 'D', 'M', 'F', 'O' Byte 80 space Bytes 81 - 82 'D''2' Byte 83 'U', 'D', 'M', 'F', 'O' Byte 84 space Bytes 85 - 86 'F''1' Byte 87 'U', 'D', 'M', 'F', 'O' Byte 88 space Bytes 89 - 90 'F''2' Byte 91 'U', 'D', 'M', 'F', 'O' Byte 92 space Bytes 93 - 94 'F''3' Byte 95 'U', 'D', 'M', 'F', 'O' Byte 96 space Bytes 97 - 98 'F''4' Byte 99 'U', 'D', 'M', 'F', 'O' Legend '#''#' Represents the board number 'F''#' Represents the Fan # 'P''#' Represents the Power Supply # 'D''#' Represents the DC Power Supply # 'U' Up 'D' Down 'M' Maintenance 'F' Failed 'O' Other unknown state.
         lucentPM4ChasCmdTable 1.3.6.1.4.1.307.1.1.2.1.3.2 no-access
Table describing the commands that can be issued to the agent to perform specific actions to any card, port or device in the system. For example to erase the flash or a particular file from the flash. Note that only a station configured with the appropriate authentication string can issue commands to the agent.
             lucentPM4ChasCmdEntry 1.3.6.1.4.1.307.1.1.2.1.3.2.1 no-access
Entries in the command table for the chassis commands. This describes one entry or row in the command table.
                 lucentPM4ChasCmdIndex 1.3.6.1.4.1.307.1.1.2.1.3.2.1.1 integer read-write
This object specifies the index in the command table. The values for this object is limited to the size of the command table on the network element. The size of the command table is set to 10 which can be changed if and when users need to schedule more than 10 commands at a given time.
                 lucentPM4ChasCmdBoardId 1.3.6.1.4.1.307.1.1.2.1.3.2.1.2 integer read-write
This object specifies the board for which the command is to be applied. The values for this object is limited to the Max number of boards.
                 lucentPM4ChasCmdUnitType 1.3.6.1.4.1.307.1.1.2.1.3.2.1.3 pmunittype read-write
This object specifies the type of the device to which this command must apply.
                 lucentPM4ChasCmdUnitIndex 1.3.6.1.4.1.307.1.1.2.1.3.2.1.4 integer read-write
This object specifies the interface index.
                 lucentPM4ChasCmdDevId 1.3.6.1.4.1.307.1.1.2.1.3.2.1.5 integer read-write
This object specifies the sub-unit id for which the command must be applied to. This value will be used by the agent to index to the correct sub-device on a board. For example, this object can have values from 1 - 96 for the modems or 1 - 4 for T1 or 1 - 3 for the E1.
                 lucentPM4ChasCmdId 1.3.6.1.4.1.307.1.1.2.1.3.2.1.6 integer read-write
This object specifies the command. Each command takes a unique value. The completion status of this command is set in the result object of the table. Enumeration: 'addfilter': 10, 'adduser': 6, 'ifconfig': 26, 'resetport': 4, 'traceroutes': 24, 'resetospf': 15, 'eraseallflash': 2, 'resetvirtport': 13, 'deleteuser': 7, 'deleteprop': 17, 'diallocation': 9, 'reboot': 29, 'eraseconfig': 27, 'version': 23, 'resetall': 21, 'addlocation': 8, 'resetfilter': 5, 'deletefilter': 11, 'saveall': 3, 'addprop': 16, 'ptrace': 25, 'addospfarea': 14, 'resetprop': 18, 'eraseflashfile': 1, 'erasecomos': 28, 'resetether0': 19, 'resetether1': 20, 'resetconsole': 22, 'addmodem': 12.
                 lucentPM4ChasCmdParams 1.3.6.1.4.1.307.1.1.2.1.3.2.1.7 octet string read-write
This object specifies the command parameters. Each parameter must be seperated by a blank space. The last parameter is terminated with a ';'.
                 lucentPM4ChasCmdResult 1.3.6.1.4.1.307.1.1.2.1.3.2.1.8 pmdiagcmdstatus read-only
This object specifies the command result. The result for each of the previous 10 commands will be stored in a table, which can be retrieved by the client when needed.
     lucentPM4ConfigMgmt 1.3.6.1.4.1.307.1.1.2.1.4
         lucentPM4CmInterfaces 1.3.6.1.4.1.307.1.1.2.1.4.1
             lucentPM4CmSerial 1.3.6.1.4.1.307.1.1.2.1.4.1.1
                 lucentPM4SerialTable 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1 no-access
A list of serial interface entries.
                     lucentPM4SerialEntry 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1 no-access
A serial interface entry containing objects at the physical and session layer.
                         lucentPM4SerialBoardIndex 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.1 integer read-only
A unique value for each board in the PortMaster chassis. The Max value of this variable is limited by the number of boards in the chassis. This value is limited to 255.
                         lucentPM4SerialUnitType 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.2 pmunittype read-only
Unit type indicates the serial port. The interface table ifIndex is a combination of board index, unit type and unit index.
                         lucentPM4SerialIndex 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.3 integer read-only
A unique value for each serial interface on a given board.
                         lucentPM4ModemId 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.4 integer read-only
This object is the cross reference to the modem interface table index. The value is dynamically assigned when the call is established.
                         lucentPM4SerialPortNumber 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.5 integer read-only
A serial port to which this modem is assigned for this call.
                         lucentPM4SerialPhysType 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.6 integer read-only
The type of physical serial interface, distinguished according to the physical/link protocol(s) being currently used on the interface. When this object is set to asyn(2), then the service types dial-in, dial- out, login, and device are valid. When this object is set to sync(3), the serial service types dial-in, dial- out and hardwired are valid. Enumeration: 'async': 2, 'other': 1, 'sync': 3, 'isdn': 4.
                         lucentPM4SerialPortStatus 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.7 integer read-only
The status of the serial interface. Enumeration: 'established': 3, 'noservice': 6, 'idle': 1, 'connecting': 2, 'command': 5, 'disconnecting': 4.
                         lucentPM4SerialDS0State 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.8 integer read-write
Cross reference value for each DS0 for a given T1/E1 line and a given board in the PM4 chassis. Enumeration: 'notavailable': 1, 'busyout': 2, 'havecomport': 3.
                         lucentPM4SerialUser 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.9 displaystring read-only
Name of the active user. Blank if not active.
                         lucentPM4SerialSessionId 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.10 displaystring read-only
A unique Session Identifier which matches the RADIUS session ID. Blank when not using RADIUS.
                         lucentPM4SerialTypeHardwired 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.11 integer read-write
The active type of service being provided by the serial interface. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4SerialTypeNwDialIn 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.12 integer read-write
The active type of service being provided by the serial interface. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4SerialTypeNwDialout 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.13 integer read-write
The active type of service being provided by the serial interface. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4SerialTypeLogin 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.14 integer read-write
The active type of service being provided by the serial interface. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4SerialTypeDevice 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.15 integer read-write
The active type of service being provided by the serial interface. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4SerialTypeDeviceName 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.16 displaystring read-write
Device name if the lucentPM4SerialTypeDevice is enabled. This is a string of characters (e.g. /dev/tty1) indicating the device name.
                         lucentPM4SerialDirection 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.17 integer read-only
The direction the active session was initiated. Enumeration: 'out': 2, 'inout': 3, 'in': 1.
                         lucentPM4SerialStarted 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.18 timeticks read-only
The amount of time this session has been active.
                         lucentPM4SerialIdle 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.19 timeticks read-only
The amount of time this session has been idle.
                         lucentPM4SerialInSpeed 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.20 gauge read-only
An estimate of the serial interface's current inbound bandwidth in bits per second.
                         lucentPM4SerialOutSpeed 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.21 gauge read-only
An estimate of the serial interface's current outbound bandwidth in bits per second.
                         lucentPM4SerialIpAddress 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.22 ipaddress read-only
The IP address associated with the serial interface. If being used as a network type port, this is the remote user's IP address. If being used as a device or login, this is the IP address of the host the user is connected to.
                         lucentPM4SerialifDescr 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.23 displaystring read-only
A textual string containing information about the network interface bound to the serial interface.
                         lucentPM4SerialInOctets 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.24 counter read-only
The total number of octets received on the serial interface.
                         lucentPM4SerialOutOctets 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.25 counter read-only
The total number of octets transmitted on the serial interface.
                         lucentPM4SerialQOctets 1.3.6.1.4.1.307.1.1.2.1.4.1.1.1.1.26 counter read-only
The total number of octets queued on the serial interface.
             lucentPM4CmT1E1 1.3.6.1.4.1.307.1.1.2.1.4.1.2
                 lucentPM4T1E1Table 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1 no-access
A list of T1/E1 interface entries.
                     lucentPM4T1E1Entry 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1 no-access
A T1/E1 entry containing objects at the physical layer.
                         lucentPM4T1E1BoardIndex 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.1 integer read-only
A unique value for each board in the PM4 chassis.
                         lucentPM4T1E1UnitType 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.2 pmunittype read-only
This object specifies the type of the unit as the T1/E1 line. This value is a part of the interface table ifIndex.
                         lucentPM4T1E1Index 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.3 integer read-only
A unique value for each T1/E1 interface.
                         lucentPM4T1E1SerialIndex 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.4 integer read-only
The value of the instance for the serial port. This object provides a cross reference from the T1/E1 interface to the serial port to which it is mapped.
                         lucentPM4T1E1SerialCount 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.5 integer read-only
The number of serial ports assigned to this interface. If this is a Channelized T1/E1, then the count is 24/32. If this is a fractional T1/E1, then the count can be any number between 1 and a number less than 24/32.
                         lucentPM4T1E1PhysType 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.6 integer read-only
The type of interface (T1 or E1). Enumeration: 'e1': 2, 't1': 1.
                         lucentPM4T1E1Status 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.7 pmequippristatus read-only
The current operational status of the interface.
                         lucentPM4T1E1Function 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.8 integer read-only
The configured function of the interface. Enumeration: 'clear': 3, 'channelized': 2, 'isdnfrac': 5, 'isdn': 1, 'fractional': 4.
                         lucentPM4T1E1Framing 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.9 integer read-only
The configured line framing. Enumeration: 'esf': 1, 'd4': 2, 'crc4': 3, 'fas': 4.
                         lucentPM4T1E1Encoding 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.10 integer read-only
The configured line signal encoding. Enumeration: 'ami': 1, 'hdb3': 3, 'b8zs': 2.
                         lucentPM4T1E1PCM 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.11 integer read-only
The configured voice modulation. Enumeration: 'ulaw': 1, 'alaw': 2.
                         lucentPM4T1E1SuperSignal 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.12 integer read-write
The configured supervisory signalling mode for this interface. Enumeration: 'em': 1, 'groundstart': 2.
                         lucentPM4T1E1StartMode 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.13 integer read-write
The configured start mode for this interface. Enumeration: 'wink': 1, 'immediate': 2.
                         lucentPM4T1E1ChangeTime 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.14 timeticks read-only
The amount of time since the last status change.
                         lucentPM4T1E1RecvLevel 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.15 gauge read-only
An estimate of the serial interface's current recieve signal level in DB.
                         lucentPM4T1E1BlueAlarms 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.16 counter read-only
The total number of Blue Alarms on the interface.
                         lucentPM4T1E1YellowAlarms 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.17 counter read-only
The total number of Yellow Alarms on the interface.
                         lucentPM4T1E1CarrierLoss 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.18 counter read-only
The total number of times the interface has lost carrier.
                         lucentPM4T1E1SyncLoss 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.19 counter read-only
The total number of times the interface has lost frame synchronization.
                         lucentPM4T1E1BipolarErrors 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.20 counter read-only
The total number of bipolar violations detected on the interface.
                         lucentPM4T1E1CRCErrors 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.21 counter read-only
The total number of frame level CRC errors detected on the interface.
                         lucentPM4T1E1SyncErrors 1.3.6.1.4.1.307.1.1.2.1.4.1.2.1.1.22 counter read-only
The total number of frame synchronization errors detected on the interface.
             lucentPM4CmModem 1.3.6.1.4.1.307.1.1.2.1.4.1.3
                 lucentPM4ModemTable 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1 no-access
A list of modem entries.
                     lucentPM4ModemEntry 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1 no-access
A modem entry containing objects at the session layer.
                         lucentPM4ModemBoardIndex 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.1 integer read-only
A unique value for each modem interface.
                         lucentPM4ModemUnitType 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.2 pmunittype read-only
Unit type specifies the type of device or interface.
                         lucentPM4ModemIndex 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.3 integer read-only
A unique value for each modem interface. The value of this object can be 1 - 96 for a Quad T1, 1 - 94 for a Tri E1 card.
                         lucentPM4ModemPortName 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.4 displaystring read-only
A textual string containing the name of the serial interface (ie. S0, S1, etc).
                         lucentPM4ModemStatus 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.5 integer read-only
A current state of the modem. Enumeration: 'none': 1, 'halt': 8, 'admin': 9, 'ready': 7, 'bound': 2, 'down': 6, 'test': 5, 'connecting': 3, 'active': 4.
                         lucentPM4ModemProtocol 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.6 integer read-only
The error correcting protocol being used in the modem. Enumeration: 'none': 1, 'mnp': 3, 'bufferd': 4, 'direct': 5, 'lapm': 2, 'cellular': 6.
                         lucentPM4ModemCompression 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.7 integer read-only
The compression being used in the modem interface. Enumeration: 'v42bis': 2, 'mnp5': 3, 'none': 1, 'stac': 4.
                         lucentPM4ModemInSpeed 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.8 gauge read-only
An estimate of the modem interface's current inbound bandwidth in bits per second.
                         lucentPM4ModemOutSpeed 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.9 gauge read-only
An estimate of the modem interface's current outbound bandwidth in bits per second.
                         lucentPM4ModemInByteCount 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.10 counter read-only
The total number of bytes received on the serial interface.
                         lucentPM4ModemOutByteCount 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.11 counter read-only
The total number of bytes transmitted on the serial interface.
                         lucentPM4ModemRetrains 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.12 counter read-only
The number of retrains attempted by the modem.
                         lucentPM4ModemRenegotiates 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.13 counter read-only
The number of renegotiates attempted by the modem.
                         lucentPM4ModemCalls 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.14 counter read-only
The number of times a call received by the modem.
                         lucentPM4ModemDetects 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.15 counter read-only
The number of analog calls received by the modem.
                         lucentPM4ModemConnects 1.3.6.1.4.1.307.1.1.2.1.4.1.3.1.1.16 counter read-only
The number of successful calls received by the modem.
             lucentPM4CmEther 1.3.6.1.4.1.307.1.1.2.1.4.1.4
                 lucentPM4EtherTable 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1 no-access
A list of ethernet interface entries. This object is not accessible
                     lucentPM4EtherEntry 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1 no-access
Ethernet interface entry containing objects at the Session/Physical layers.
                         lucentPM4EtherBoardIndex 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.1 integer read-only
A unique value for each ethernet board. The manager card has two ethernet interfaces at present. The ethernet interface in slot 4 has a board ID 10 and if there is a manager card in slot 5, the board ID for the interface would be 11.
                         lucentPM4EtherIfType 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.2 pmunittype read-only
The interface type which together with the board ID and the interface number will uniquely identify the interface.
                         lucentPM4EtherIndex 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.3 integer read-only
A unique value for each ethernet interface. The manager card has two ethernet interfaces at present. ether0(1) represents 10 Base-T interface and ether1(2) specifies the 10/100 Base-T auto-sensing ethernet interface. Enumeration: 'other': 3, 'ether0': 1, 'ether1': 2.
                         lucentPM4EtherIfIndex 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.4 integer read-only
IfIndex cross reference value for the ethernet interfaces. The manager card has two ethernet interfaces at present. ether0(67436545) represents 10 Base-T interface which corresponds to board 4 and interface 1. The enumerated value ether1(168099841) specifies the 10/100 Base-T auto-sensing ethernet interface which corresponds to board 4 and interface 2. We can add the standby manager card ethernet interfaces when they are available. Enumeration: 'ether0': 67436545, 'ether1': 168099841.
                         lucentPM4EtherPortName 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.5 displaystring read-write
A printable ASCII string specifying the name of the ethernet port.
                         lucentPM4EtherMacAddress 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.6 physaddress read-only
Physical address of the interface.
                         lucentPM4EtherIpAddress 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.7 ipaddress read-write
IP address of the interface.
                         lucentPM4EtherIpGateway 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.8 ipaddress read-write
IP address of the gateway machine.
                         lucentPM4EtherPriNameServer 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.9 ipaddress read-write
IP address of the primary name server.
                         lucentPM4EtherAltNameServer 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.10 ipaddress read-write
IP address of the alternate name server.
                         lucentPM4EtherSubnetMask 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.11 ipaddress read-write
Subnet mask of the interface. Used to partition the network into different branches.
                         lucentPM4EtherInFilter 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.12 displaystring read-write
IP Input packet filter. Used to control the type of IP packets reaching the interface.
                         lucentPM4EtherOutFilter 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.13 displaystring read-write
IP output packet filter. Used to control the type of packets sent out of the interface.
                         lucentPM4EtherOptRip 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.14 integer read-write
The RIP protocol enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptSlip 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.15 integer read-write
The SLIP protocol enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptEtherDown 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.16 integer read-write
Ethernet interface down enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptBcastHigh 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.17 integer read-write
Use high one(s) broadcast address enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptSnmp 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.18 integer read-write
Default SNMP protocol enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptNoListen 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.19 integer read-write
Do not listen to RIP on the ether interface. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptDefaultRip 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.20 integer read-write
Default RIP protocol enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptDefaultListen 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.21 integer read-write
Default listen enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptIPFilter 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.22 integer read-write
IP filter enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptDns 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.23 integer read-write
DNS enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptPmeMsg 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.24 integer read-write
PME Msg. enable/disable option. Whatever that means. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptNoClip 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.25 integer read-write
No Clip enable/disable option. Whatever that means. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptEtherIpx 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.26 integer read-write
Ether IPX enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptNetBIOS 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.27 integer read-write
Net BIOS enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptAccounting 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.28 integer read-write
Accounting enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
                         lucentPM4EtherOptNoPAP 1.3.6.1.4.1.307.1.1.2.1.4.1.4.1.1.29 integer read-write
PAP enable/disable option. Enumeration: 'enable': 2, 'disable': 1.
     lucentPM4FaultMgmt 1.3.6.1.4.1.307.1.1.2.1.5
         lucentPM4FaultMgmtIsolation 1.3.6.1.4.1.307.1.1.2.1.5.1
             lucentPM4FaultMgmtChasTrap 1.3.6.1.4.1.307.1.1.2.1.5.1.1 no-access
Chassis Trap table which indicates one of several Traps. The chassis trap table stores the previous history of the traps which can be retrieved by the management stations at a later time. This object is not-accessible and present for MIB clarity.
                 lucentPM4FMChasTrapEntry 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1 no-access
Entry in the chassis Trap table. Each trap is uniquely identified by an index. This object is not accessible and present for MIB clarity.
                     lucentPM4FMChasTrapIndex 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.1 integer read-only
Index into the Trap table on the agent. This table stores the previous 500 traps which can be retrieved at any given time.
                     lucentPM4FMChasTrapBoardID 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.2 integer read-only
Board ID is the board number for which this trap is stored. If the trap is for an auxillary device such as a power supply or fan, this value is set to zero.
                     lucentPM4FMChasTrapUnitType 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.3 pmunittype read-only
Uniquely specifies the unit type for this trap. The unit can be a board or any other device in the chassis such as a fan or a power supply.
                     lucentPM4FMChasTrapUnitIndex 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.4 integer read-only
Uniquely specifies the unit index. The unit index is same as the ifIndex for T1/E1 interfaces, or the modemIndex for the modems or fan or power supply index for fan or power supplies.
                     lucentPM4FMChasTrapStatus 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.5 integer read-only
Trap status specifies the associated object in the Trap is online(2), offline(3), maintenance(4) or fault(5). Enumeration: 'fault': 5, 'notinstalled': 6, 'other': 1, 'maintenance': 4, 'online': 2, 'offline': 3.
                     lucentPM4FMChasTrapSeverity 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.6 pmalarmtype read-only
Trap severity specifies the severity of the Trap for the associated object.
                     lucentPM4FMChasTrapTimeStamp 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.7 timeticks read-only
This object stores the timestamp of this trap.
                     lucentPM4FMChasTrapState 1.3.6.1.4.1.307.1.1.2.1.5.1.1.1.8 integer read-write
This object stores the Trap state of this trap. Enumeration: 'acked': 3, 'ackdue': 2, 'trapsent': 1.
             lucentPM4FMBoardIndex 1.3.6.1.4.1.307.1.1.2.1.5.1.2 integer no-access
Board index uniquely specifies the board in the chassis. This object is set to zero for power supplies, fans and other auxillary devices. This object is not accessible through Get, Get-Next or Set PDUs. It is sent out as part of the Trap.
             lucentPM4FMUnitIndex 1.3.6.1.4.1.307.1.1.2.1.5.1.3 integer no-access
Unit index uniquely specifies the T1/E1 line, or modem or any device (logical/physical) in the chassis. This object is not accessible through Get, Get-Next or Set PDUs. It is sent out as part of the Trap.
             lucentPM4FMUnitType 1.3.6.1.4.1.307.1.1.2.1.5.1.4 pmunittype no-access
Unit type specifies the T1/E1 line, or modem or any device in the chassis. This object is not accessible through Get, Get-Next or Set PDUs. It is sent out as part of the Trap.
             lucentPM4FMUnitTrapStatus 1.3.6.1.4.1.307.1.1.2.1.5.1.5 integer no-access
Trap status specifies the associated object in the Trap. This object is not accessible other than when produced as the result of a trap. Enumeration: 'ses': 22, 'yellowalarm': 15, 'uas': 24, 'carrierloss': 10, 'pwrwarn': 6, 'cv': 16, 'es': 21, 'failed': 4, 'los': 12, 'other': 1, 'fer': 19, 'renegotiation': 11, 'offline': 2, 'temphot': 8, 'css': 27, 'sefs': 23, 'dm': 25, 'online': 3, 'les': 26, 'pll': 20, 'tempwarn': 7, 'dtrloss': 9, 'ais': 13, 'crc': 17, 'bpv': 18, 'bes': 28, 'redalarm': 14, 'restored': 5.
             lucentPM4FMUnitTrapSeverity 1.3.6.1.4.1.307.1.1.2.1.5.1.6 pmalarmtype no-access
Trap severity specifies the severity of the Trap for the associated object. This object is not accessible except when produced as the result of a trap.
         lucentPM4FMTrapConfig 1.3.6.1.4.1.307.1.1.2.1.5.2
             lucentPM4FMEqpTrapCfg 1.3.6.1.4.1.307.1.1.2.1.5.2.1 no-access
Equipment Trap configuration table configure Traps. The objects in this table are used to enable or disable traps on a per board/interface/device basis. This object is not-accessible and present for MIB clarity.
                 lucentPM4FMEqpTrapCfgEntry 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1 no-access
Entry in the equipment Trap config table. Each trap is uniquely identified by the board ID, Unit type and unit index. For auxillary devices such as power supplies and fans, the board index will be zero, the unit index identifies the units and the unit type specifies if the unit is a fan, power supplies etc. This object is not accessible and present for MIB clarity.
                     lucentPM4FMEqpBoardIndex 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.1 integer read-only
Board ID for which the Trap configuration need to apply. The board ID is zero if this trap configuration is for an auxillary device such as fans or power supplies.
                     lucentPM4FMEqpUnitType 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.2 pmunittype read-only
Unit type alongwith the board index and unit index specifies uniquely the device/interface which is being configured.
                     lucentPM4FMEqpUnitIndex 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.3 integer read-only
Unit index refers to the interface or sub-device such as a modem, serial port etc. For devices such as power supplies and fans this object is zero.
                     lucentPM4FMEqpTrapId 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.4 integer read-write
Trap ID indicating the trap for which the configuration must apply. Enumeration: 'boardoffline': 1, 'linethresh': 13, 'modemfail': 10, 'boardonline': 2, 'boardtempnormal': 8, 'pwrsupfail': 3, 'linedown': 11, 'radiusauthfail': 15, 'fanfail': 5, 'boardpwrshutdown': 14, 'lineup': 12, 'boardtoohot': 9, 'pwrsuprestored': 4, 'fanrestored': 6, 'boardtempwarn': 7.
                     lucentPM4FMEqpTrapCtl 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.5 integer read-write
Trap control which configures the trap off(1) or on(2). When the trap is configured as off(1), the trap is not sent out to the management station. When configures as on(2), the trap is sent to all the management stations configured to receive the trap. Enumeration: 'enable': 2, 'disable': 1.
                     lucentPM4FMEqpRepTimer 1.3.6.1.4.1.307.1.1.2.1.5.2.1.1.6 integer read-write
If the trap is to be repeated, this object specifies the time in seconds. When this object value is set to 0, it indicates the trap is non-repeat trap.
             lucentPM4FMT1E1ThreshTrapCfg 1.3.6.1.4.1.307.1.1.2.1.5.2.2 no-access
T1/E1 Threshold Trap configuration table to configure the thresholds for various T1/E1 traps. This object is not-accessible and present for MIB clarity.
                 lucentPM4FMT1E1ThreshTrapCfgEntry 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1 no-access
Entry in the T1/E1 threshold trap config table. Each trap is uniquely identified by the board index, unit type and unit index which is the T1/E1 interface number. This object is not accessible and present for MIB clarity.
                     lucentPM4FMT1E1ThreshBoardIndex 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.1 integer read-only
Board ID for which the Trap threshold configuration must apply. It includes boards 1 - 10 and other devices such as power supplies and fans etc.
                     lucentPM4FMT1E1ThreshUnitType 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.2 pmunittype read-only
Unit type for which the Trap threshold configuration must be applied.
                     lucentPM4FMT1E1ThreshESs 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.3 gauge read-write
The threshold for errored seconds on the interface. A trap is issued when this set limit is exceeded. When this threshold exceeds, the performance of the interface will degrade. A trap is generated to notify the adminstrator to take appropriate action.
                     lucentPM4FMT1E1ThreshSESs 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.4 gauge read-write
The threshold for severely errored seconds on the interface. A trap is issued when this limit is exceeded. A severely errored seconds is a second with 320 or more path code violation error events or one or more out of frame defects or detected AIS defect.
                     lucentPM4FMT1E1ThreshSEFSs 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.5 gauge read-write
The threshold for severely errored framing seconds. A trap is issued when this threshold is exceeded. A severely errored framing second is a second with one or more frame defects or detected AIS defect.
                     lucentPM4FMT1E1ThreshUASs 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.6 gauge read-write
The threshold for unavailable seconds. A trap is issued when this set threshold is exceeded. Unavailable seconds are calculated by counting the number of seconds that the interface is unavailable from the onset of 10 SESs. Once unavailable, the interface becomes available at the onset of 10 contiguous no SESs.
                     lucentPM4FMT1E1ThreshCSSs 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.7 gauge read-write
The threshold for controlled slip seconds on the interface. A trap is issued when this set threshold is exceeded. A controlled slip second is a one-second interval containing one or more controlled slips.
                     lucentPM4FMT1E1ThreshPCVs 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.8 gauge read-write
The threshold for path code violations on the interface. A trap is issued when this set threshold is exceeded. PCV is a frame syncronization bit error in the D4 and E1-noCRC format interfaces or a CRC error in the ESF (extended super frame) and E1-CRC interface formats.
                     lucentPM4FMT1E1ThreshLESs 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.9 gauge read-write
The threshold for line errored seconds on the interface. A trap is sent to the manager when this set threshold is exceeded. A line errored second, according to T1M1.3 is a second in which one or more line code violations were detected.
                     lucentPM4FMT1E1ThreshBESs 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.10 gauge read-write
The threshold for bursty errored seconds on the interface. A trap is sent to the manager when this set threshold is exceeded. A bursty errored second is a second with fewer than 320 and more than 1 path code violations.
                     lucentPM4FMT1E1ThreshDMs 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.11 gauge read-write
The threshold for degraded minutes on the interface. A trap is sent to the manager when this set threshold is exceeded. Degraded minutes are determined by collecting all of the available seconds, after removing any severely errored seconds. The resulting seconds is grouped into 60 second intervals and if the cumulative errors during the seconds present in the group exceeds 1E-6.
                     lucentPM4FMT1E1ThreshRepTimer 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.12 integer read-write
If the trap is to be repeated, this object specifies the time in seconds. When this object value is set to 0, it indicates the trap is non-repeat trap.
                     lucentPM4FMT1E1ThreshTrapAck 1.3.6.1.4.1.307.1.1.2.1.5.2.2.1.13 integer read-write
If set to ack(3), clears the trap condition. If the value is set to noack(2), leaves the trap condition unchanged. Enumeration: 'ack': 3, 'other': 1, 'noack': 2.
             lucentPM4FMEnvTrapCfg 1.3.6.1.4.1.307.1.1.2.1.5.2.3 no-access
Environment Trap configuration table. This table enables configuration of voltage, power levels and temperature ranges for different units in the chassis. This object is not-accessible and present for MIB clarity.
                 lucentPM4FMEnvTrapCfgEntry 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1 no-access
Entry in the environment trap config table. Each trap is uniquely identified by the board index, unit type and unit index. This object is not accessible and present for MIB clarity.
                     lucentPM4FMEnvBoardID 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.1 integer read-only
Board ID specifies the board identifier for this trap. If the trap configuration is for an auxillary device such as a power supply or fan, this object will be set to zero. The unit type and the unit index will uniquely identify the auxillary devices.
                     lucentPM4FMEnvUnitType 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.2 pmunittype read-only
Unit for which the Trap configuration must to apply.
                     lucentPM4FMEnvUnitIndex 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.3 integer read-only
Unit index specifies the interface or sub-unit for this trap (modem or T1/E1 interface etc.). The unit type and the unit index will uniquely identify the auxillary devices.
                     lucentPM4FMEnvOptUnitTemp 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.4 integer read-write
The optimum temperature for this unit. A trap is generated when the temperature deviates from the specified range. The temperature is specified as an integer in degrees farenheit.
                     lucentPM4FMEnvUnitTempRange 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.5 integer read-write
The temperature range above which a trap is generated. The temperature must be specified as an integer in degree Farenhiet (for example +/- 5 degree Far.).
                     lucentPM4FMEnvOptUnitPwrLvl 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.6 integer read-write
The optimal power level that is appropriate for this unit. A trap is generated when the power level fluctuates outside the limits set.
                     lucentPM4FMEnvUnitPwrRange 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.7 integer read-write
The power range specified in volts. A trap is generated when the power level fluctuates outside the Opt Pwr +/- Range set.
                     lucentPM4FMEnvTrapCtl 1.3.6.1.4.1.307.1.1.2.1.5.2.3.1.8 integer read-write
The trap control used to turn the environment traps on or off for the specified unit(s). Enumeration: 'enable': 2, 'disable': 1.
     lucentPM4PerfMgmt 1.3.6.1.4.1.307.1.1.2.1.6
         lucentPM4T1E1PerfMgmt 1.3.6.1.4.1.307.1.1.2.1.6.1
             lucentPM4T1E1PMCur 1.3.6.1.4.1.307.1.1.2.1.6.1.1 no-access
Performance management table representing the performance statistics of T1/E1 interfaces in the box. This table represents the current 15 mins statistics. This object is not accessible and present for clarity purpose. This table is part of RFC 1406.
                 lucentPM4T1E1PMCurEntry 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1 no-access
Performance management table entries for all the T1/E1 interfaces in the box. This table represents the current 15 mins statistics. This object is not accessible and present for clarity purpose.
                     lucentPM4T1E1PMCurBoard 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.1 integer read-only
Board number of the interface. The global interface number is computed by using the Most Significant byte of the ifIndex and the Least Significant 2 bytes represents the interface index. Byte 3 will represent the unit type which would be a T1 or E1.
                     lucentPM4T1E1PMCurUnitType 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.2 pmunittype read-only
Unit type indicates the type of interface as T1/E1 or T3/E3 in future. This is part of the interface table ifIndex which is constructed with boardID, unit type and unit index.
                     lucentPM4T1E1PMCurLineNum 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.3 integer read-only
Line number uniquely identifies the T1/E1 interface on a given board.
                     lucentPM4T1E1PMCurIfIndex 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.4 integer read-only
Interface table ifIndex cross reference. The global interface number is computed by using the Most Significant byte as the board ID and the Least Significant 2 bytes represents the interface index. The third byte represents the unit type which will be a T1 or E1. Thus board 0 interface 3 is represented as 0x00050003. The global interface number corresponds to the IfIndex in MIB II.
                     lucentPM4T1E1PMCurESs 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.5 gauge read-only
The number of errored seconds, encountered by the line in the current 15 mins interval.
                     lucentPM4T1E1PMCurSESs 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.6 gauge read-only
The number of Severely Errored Seconds encountered by the line in the current 15 mins interval.
                     lucentPM4T1E1PMCurSEFSs 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.7 gauge read-only
The number of Severely Errored Framing Seconds encountered by the line in the current 15 mins interval.
                     lucentPM4T1E1PMCurUASs 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.8 gauge read-only
The number of Unavailable Seconds encountered by the line in the current 15 mins interval.
                     lucentPM4T1E1PMCurCSSs 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.9 gauge read-only
The number of Controlled Slip Seconds encountered by the line in the current 15 mins interval.
                     lucentPM4T1E1PMCurPCVs 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.10 gauge read-only
The number of Path Coding Violations encountered by the line in the current 15 mins interval.
                     lucentPM4T1E1PMCurLESs 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.11 gauge read-only
The number of Line Errored Seconds encountered by the line in the current 15 mins interval.
                     lucentPM4T1E1PMCurBESs 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.12 gauge read-only
The number of Bursty Errored Seconds encountered by the line in the current 15 mins interval.
                     lucentPM4T1E1PMCurDMs 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.13 gauge read-only
The number of Degraded Minutes encountered by the line in the current 15 mins interval.
                     lucentPM4T1E1PMCurLCVs 1.3.6.1.4.1.307.1.1.2.1.6.1.1.1.14 gauge read-only
The number of Line Code Violations encountered by the line in the current 15 mins interval.
         lucentPM4T1E1PMInt 1.3.6.1.4.1.307.1.1.2.1.6.2 no-access
Performance management table representing the performance statistics of T1/E1 interfaces in the box. This table represents the 24 hr statistics divided into 96 15 mins intervals. This object is not accessible and present for clarity purpose. This table is part of RFC 1406.
             lucentPM4T1E1PMIntEntry 1.3.6.1.4.1.307.1.1.2.1.6.2.1 no-access
Performance management table entries for all the T1/E1 interfaces in the box. This table represents the 24 hr statistics divided into 96 15 mins intervals. This object is not accessible and present for clarity purpose.
                 lucentPM4T1E1PMIntBoard 1.3.6.1.4.1.307.1.1.2.1.6.2.1.1 integer read-only
Board number of the interface. The global interface number is computed by using the Most Significant nibble of the ifIndex and the Least Significant nibble represents the interface index. Thus board 0 interface 3 is represented as 0x03 or 03 decimal and board 10 interface 3 is represented as 0xa3 or 163 decimal. In an integer, of 4 bytes wide, the 3 MSBytes will all be zeros. The global interface number corresponds to the IfIndex of MIB II.
                 lucentPM4T1E1PMIntUnitType 1.3.6.1.4.1.307.1.1.2.1.6.2.1.2 pmunittype read-only
Unit type indicates the type of physical or logical device. The unit type for this table is either T1 or E1.
                 lucentPM4T1E1PMIntLineNum 1.3.6.1.4.1.307.1.1.2.1.6.2.1.3 integer read-only
Line number uniquely identifies the T1/E1 interface for this board.
                 lucentPM4T1E1PMIntInterval 1.3.6.1.4.1.307.1.1.2.1.6.2.1.4 integer read-only
Interval number for a given board. The 24 hr period is divided into 96 15 min intervals, where 1 is the most recent and 96 is the least recent.
                 lucentPM4T1E1PMIntIfIndex 1.3.6.1.4.1.307.1.1.2.1.6.2.1.5 integer read-only
Interface table ifIndex cross reference. The global interface number is computed by using the Most Significant byte as the board ID and the Least Significant 2 bytes represents the interface index. The third byte represents the unit type which will be a T1 or E1. Thus board 0 interface 3 is represented as 0x00050003. The global interface number corresponds to the IfIndex in MIB II.
                 lucentPM4T1E1PMIntESs 1.3.6.1.4.1.307.1.1.2.1.6.2.1.6 gauge read-only
The number of errored seconds, encountered by the line in the last 24 hrs divided into 96 15 mins intervals.
                 lucentPM4T1E1PMIntSESs 1.3.6.1.4.1.307.1.1.2.1.6.2.1.7 gauge read-only
The number of Severely Errored Seconds encountered by the line for one of the 96 15 mins intervals.
                 lucentPM4T1E1PMIntSEFSs 1.3.6.1.4.1.307.1.1.2.1.6.2.1.8 gauge read-only
The number of Severely Errored Framing Seconds encountered by the line for one of the 96 15 mins intervals.
                 lucentPM4T1E1PMIntUASs 1.3.6.1.4.1.307.1.1.2.1.6.2.1.9 gauge read-only
The number of Unavailable Seconds encountered by the line for one of the 96 15 mins intervals.
                 lucentPM4T1E1PMIntCSSs 1.3.6.1.4.1.307.1.1.2.1.6.2.1.10 gauge read-only
The number of Controlled Slip Seconds encountered by the line for one of the 96 15 mins intervals.
                 lucentPM4T1E1PMIntPCVs 1.3.6.1.4.1.307.1.1.2.1.6.2.1.11 gauge read-only
The number of Path Coding Violations encountered by the line for one of the 96 15 mins intervals.
                 lucentPM4T1E1PMIntLESs 1.3.6.1.4.1.307.1.1.2.1.6.2.1.12 gauge read-only
The number of Line Errored Seconds encountered by the line for one of the 96 15 mins intervals.
                 lucentPM4T1E1PMIntBESs 1.3.6.1.4.1.307.1.1.2.1.6.2.1.13 gauge read-only
The number of Bursty Errored Seconds encountered by the line for one of the 96 15 mins intervals.
                 lucentPM4T1E1PMIntDMs 1.3.6.1.4.1.307.1.1.2.1.6.2.1.14 gauge read-only
The number of Degraded Minutes encountered by the line for one of the 96 15 mins intervals.
                 lucentPM4T1E1PMIntLCVs 1.3.6.1.4.1.307.1.1.2.1.6.2.1.15 gauge read-only
The number of Line Code Violations encountered by the line for one of the 96 15 mins intervals.
         lucentPM4T1E1PMTotal 1.3.6.1.4.1.307.1.1.2.1.6.3 no-access
Performance management table representing the performance statistics of T1/E1 interfaces in the box. This table represents the 24 hr statistics divided into 96 15 mins intervals. This object is not accessible and present for clarity purpose. This table is part of RFC 1406.
             lucentPM4T1E1PMTotalEntry 1.3.6.1.4.1.307.1.1.2.1.6.3.1 no-access
Performance management table entries for all the T1/E1 interfaces in the box. This table represents the 24 hr statistics divided into 96 15 mins intervals. This object is not accessible and present for clarity purpose.
                 lucentPM4T1E1PMTotalBoard 1.3.6.1.4.1.307.1.1.2.1.6.3.1.1 integer read-only
Board number of the interface. The global interface number is computed by using the Most Significant nibble of the ifIndex and the Least Significant nibble represents the interface index. Thus board 0 interface 3 is represented as 0x03 or 03 decimal and board 10 interface 3 is represented as 0xa3 or 163 decimal. In an integer, of 4 bytes wide, the 3 MSBytes will all be zeros. The global interface number corresponds to the IfIndex of MIB II. This table stores the cumulative values for the past 24 hr period.
                 lucentPM4T1E1PMTotalUnitType 1.3.6.1.4.1.307.1.1.2.1.6.3.1.2 pmunittype read-only
Unit type indicates the type of physical or logical device. The unit type for this table is either T1 or E1.
                 lucentPM4T1E1PMTotalLineNum 1.3.6.1.4.1.307.1.1.2.1.6.3.1.3 integer read-only
Interface number for a given board. The global interface number is computed by using the Most Significant nibble of the ifIndex and the Least Significant nibble represents the interface index. Thus board 0 interface 3 is represented as 0x03 or 03 decimal and board 10 interface 3 is represented as 0xa3 or 163 decimal. In an integer, of 4 bytes wide, the 3 MSBytes will all be zeros. The global interface number corresponds to the IfIndex in MIB II.
                 lucentPM4T1E1PMTotalIfIndex 1.3.6.1.4.1.307.1.1.2.1.6.3.1.4 integer read-only
IfIndex cross reference value. This value is obtained from the Board/board number and interface number by combining them into the LSByte. The upper nibble represents the board and the lower nibble represents the line number.
                 lucentPM4T1E1PMTotalESs 1.3.6.1.4.1.307.1.1.2.1.6.3.1.5 gauge read-only
The cumulative value of errored seconds, encountered by the line in the last 24 hrs.
                 lucentPM4T1E1PMTotalSESs 1.3.6.1.4.1.307.1.1.2.1.6.3.1.6 gauge read-only
The cumulative value Severely Errored Seconds encountered by the line for the 24 hr period.
                 lucentPM4T1E1PMTotalSEFSs 1.3.6.1.4.1.307.1.1.2.1.6.3.1.7 gauge read-only
The cumulative value of Severely Errored Framing Seconds encountered by the line for the 24 hr period.
                 lucentPM4T1E1PMTotalUASs 1.3.6.1.4.1.307.1.1.2.1.6.3.1.8 gauge read-only
The cumulative value of Unavailable Seconds encountered by the line for the 24 hr period.
                 lucentPM4T1E1PMTotalCSSs 1.3.6.1.4.1.307.1.1.2.1.6.3.1.9 gauge read-only
The cumulative value of Controlled Slip Seconds encountered by the line for the 24 hr period.
                 lucentPM4T1E1PMTotalPCVs 1.3.6.1.4.1.307.1.1.2.1.6.3.1.10 gauge read-only
The cumulative value of Path Coding Violations encountered by the line for the 24 hr period.
                 lucentPM4T1E1PMTotalLESs 1.3.6.1.4.1.307.1.1.2.1.6.3.1.11 gauge read-only
The cumulative value of Line Errored Seconds encountered by the line for the 24 hr period.
                 lucentPM4T1E1PMTotalBESs 1.3.6.1.4.1.307.1.1.2.1.6.3.1.12 gauge read-only
The cumulative value of Bursty Errored Seconds encountered by the line for the 24 hr period.
                 lucentPM4T1E1PMTotalDMs 1.3.6.1.4.1.307.1.1.2.1.6.3.1.13 gauge read-only
The cumulative value of Degraded Minutes encountered by the line for the 24 hr period.
                 lucentPM4T1E1PMTotalLCVs 1.3.6.1.4.1.307.1.1.2.1.6.3.1.14 gauge read-only
The cumulative value of Line Code Violations encountered by the line for the 24 hr period.
     lucentPM4SecurityMgmt 1.3.6.1.4.1.307.1.1.2.1.7
     lucentPM4AcctMgmt 1.3.6.1.4.1.307.1.1.2.1.8
         lucentPM4AcctMgmtComm 1.3.6.1.4.1.307.1.1.2.1.8.1
             lucentPM4SnmpCommTable 1.3.6.1.4.1.307.1.1.2.1.8.1.1 no-access
The SNMP Community Table. This table contains entries to restrict the SNMP get and set operations.
                 lucentPM4SnmpCommEntry 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1 no-access
The entries in the community table.
                     lucentPM4SnmpCommIndex 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.1 integer read-only
The index of the command in the command table. A MAX of 10 network management stations must be specified along with their community names.
                     lucentPM4SnmpCommName 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.2 displaystring no-access
The name of the SNMP Community for SNMP readers and writers. The size of the string is limited to 32 characters. All characters in the string must be printable.
                     lucentPM4SnmpCommIpAddr 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.3 ipaddress read-write
The IP Address of the remote community.
                     lucentPM4SnmpCommReadAccess 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.4 integer read-write
Read access enable or disable for this community. When enabled, it allows read-only variable access using this community string by the SNMP client. Enumeration: 'disable': 1, 'ensable': 2.
                     lucentPM4SnmpCommWriteAccess 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.5 integer read-write
Write access enable or disable for this community. When enabled, the agent allows write access to the parameters on the agent by the SNMP clients. Enumeration: 'disable': 1, 'ensable': 2.
                     lucentPM4SnmpCommTraps 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.6 integer read-write
Traps receiving capability enable or disable for this community. When enabled, the SNMP agent forwards the traps generated in the box to this SNMP client. Enumeration: 'disable': 1, 'ensable': 2.
                     lucentPM4SnmpCommStatus 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.7 integer read-write
The status of the entry for this community. If the status is set to normal, it allows requests from this SNMP client else it discards the requests from this client. Enumeration: 'delete': 2, 'normal': 1.
                     lucentPM4SnmpCommLastError 1.3.6.1.4.1.307.1.1.2.1.8.1.1.1.8 displaystring read-only
If there is an error on a request, this variable may contain a message indicating the error.
         lucentPM4AcctMgmtCallEvent 1.3.6.1.4.1.307.1.1.2.1.8.2
             lucentPM4AMCallEventTable 1.3.6.1.4.1.307.1.1.2.1.8.2.1 no-access
Call accounting table containing a list of call events, which may be used for billing purposes.
                 lucentPM4AMCallEventEntry 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1 no-access
The entries in the accounting/billing table.
                     lucentPM4AMCEIndex 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.1 integer read-only
Call event index used as an index into the call event table. The table stores call events which may be used for billing.
                     lucentPM4AMCETimeStamp 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.2 integer read-only
Time stamp for this event in seconds since the last reboot.
                     lucentPM4AMCEType 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.3 integer read-only
Specifies the type of event associated with this entry in the call event table. Enumeration: 'callanswered': 2, 'callcleared': 3, 'baudratechanged': 6, 'namechanged': 5, 'calloriginated': 1, 'servicechanged': 4.
                     lucentPM4AMCESvcType 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.4 integer read-only
The type of service provided to the user. This field is meaningful if the event type is servicechanged(4), or namechanged(5) events. In all other cases, this object must return none(1). Enumeration: 'none': 1, 'slip': 3, 'euraw': 8, 'telnet': 10, 'terminalServer': 13, 'x25DChannel': 16, 'ppp': 2, 'frameRelay': 7, 'mp': 14, 'mpp': 4, 'x25': 5, 'rawTcp': 12, 'virtualConnect': 15, 'euui': 9, 'telnetBinary': 11, 'combinet': 6.
                     lucentPM4AMCEUName 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.5 displaystring read-only
User name of the dialed in user. This object returns the valid user name when the event type is servicechanged(4) or namechanged(5). In all other cases, it returns a NULL.
                     lucentPM4AMCEModemBoard 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.6 integer read-only
Board ID of the modem which handled this call. This value can be used to diagnose modem related problems (dropping the call, retraining too frequently etc.).
                     lucentPM4AMCEModemID 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.7 integer read-only
Identifies the specific modem on a board which handled this call. Can be used to diagnose modem related problems.
                     lucentPM4AMCEModemPort 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.8 displaystring read-only
A textual string containing the name of the serial interface (ie. S0, S1, etc).
                     lucentPM4AMCEDataRate 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.9 integer read-only
Specifies the speed of this connection. Speed is specified as baud rate for modem calls and receive data rate for ISDN calls. This object returns a 0 for call answered and call cleared events.
                     lucentPM4AMCECallingPartyID 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.10 displaystring read-only
Calling party ID. This object is valid only for call answered, call originated, and call cleared events. For all invalid event types, this object is set to NULL.
                     lucentPM4AMCECalledPartyID 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.11 displaystring read-only
Called party ID. This object is valid only for call answered, call originated, and call cleared events. For all invalid event types, this object is set to NULL.
                     lucentPM4AMCEInOctets 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.12 integer read-only
Total octets received during this call. This object is cleared at the end of each call.
                     lucentPM4AMCEOutOctets 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.13 integer read-only
Total octets sent out during this call. This object is cleared at the end of each call.
                     lucentPM4AMCECallCharge 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.14 integer read-only
Call charge for this call. This object is valid only when the event is call cleared. For all other events this object is set to zero.
                     lucentPM4AMCEDisconnReason 1.3.6.1.4.1.307.1.1.2.1.8.2.1.1.15 integer read-only
Reason for the disconnect. Enumeration: 'tsExitTcp': 24, 'pppPAPAuthFail': 42, 'localSnmp': 152, 'pppCloseUnknownMpBundle': 48, 'clidAuthServTimeout': 5, 'tsRawTCPDisable': 26, 'notApplicable': 1, 'tsExitRlogin': 31, 'sessFailSecurity': 101, 'preT310Timeout': 7, 'pppCloseEvent': 46, 'pppCloseMpAddChanFail': 49, 'pppLcpTimeout': 40, 'tsExitErrHostUnreach': 65, 'remoteEndHungUp': 185, 'tsNoIPAddr': 23, 'tsExitErrBadPort': 54, 'pppRemoteAuthFail': 44, 'requestByRadiusClient': 150, 'boardDied': 210, 'pppLcpNegotiateFail': 41, 'tsExitErrHostName': 53, 'unknown': 2, 'invalidProtocol': 120, 'sessCallback': 102, 'noModemOpenFailedDiag': 14, 'tsExitErrNetAdminUnreach': 66, 'tsPassWordFail': 25, 'tsExitErrTooMany': 50, 'noModemLossCarrier': 11, 'noModemAvailable': 9, 'noModemOpenFailed': 13, 'sessTimeOut': 100, 'localAdmin': 151, 'maxCallDurationReached': 195, 'tsExitErrClosed': 63, 'tsRloginBadOption': 32, 'tsExitErrHostReset': 60, 'tsClosedVirtualConnect': 29, 'mpNullMessageTimeout': 35, 'tsIdleTimeout': 21, 'clidAuthFailed': 4, 'v110Timeout': 160, 'pppCloseNoNcpsOpened': 47, 'pppRcvTerminate': 45, 'tsExitErrPortUnreach': 68, 'tsExitErrInvalidIP': 52, 'clidAuthRequestCallback': 6, 'tsExitErrNetUnreach': 64, 'tsUserExit': 20, 'tsExitErrTimedOut': 62, 'tsControlC': 27, 'disconnected': 3, 'tsExitErrResource': 51, 'noModemResultCodes': 12, 'tsExitTelnet': 22, 'tsExitErrHostAdminUnreach': 67, 'pppAuthTimeout': 170, 'noModemNoCarrier': 10, 'tsExitErrConnRefused': 61, 'userCallClearRequest': 180, 'lowMemory': 201, 'tsDestroyed': 28, 'pppCHAPAuthFail': 43, 'tsErrorResource': 33, 'tsVirtualConnectDestroyed': 30, 'resourceQuiesced': 190.
 lucentPM4Traps 1.3.6.1.4.1.307.1.1.2.2
       lucentPM4BoardOfflineTrap 1.3.6.1.4.1.307.1.1.2.20.1
Board down trap. The variable bindings in the Trap packet provide information about the chassis name, board number and the trap status. This Trap must be cleared manually.
       lucentPM4BoardOnlineTrap 1.3.6.1.4.1.307.1.1.2.20.2
Board up trap. The variable bindings in the Trap packet provide information about the chassis name, board number and the trap status. This Trap must be cleared manually.
       lucentPM4PwrSupFailTrap 1.3.6.1.4.1.307.1.1.2.20.3
Power supply failed trap. The variable bindings in the Trap packet provide information about the chassis name, power supply unit and the trap status. This Trap must be cleared manually.
       lucentPM4PwrSupWarnTrap 1.3.6.1.4.1.307.1.1.2.20.4
Power supply warning trap. The variable bindings in the Trap packet provide information about the chassis name, power supply unit and the trap status. This Trap is issued when the power supply fluctuates between a set threshold. This Trap must be cleared manually.
       lucentPM4PwrSupRestoredTrap 1.3.6.1.4.1.307.1.1.2.20.5
Power supply restored trap. The variable bindings in the Trap packet provide information about the chassis name, power supply unit and the trap status. This Trap is issued when a failed power supply is restored. This must be cleared manually.
       lucentPM4FanFailTrap 1.3.6.1.4.1.307.1.1.2.20.6
Fan failure trap. The variable bindings in the Trap packet provide information about the chassis name, fan number and the trap status. This Trap must be cleared manually.
       lucentPM4FanRestoredTrap 1.3.6.1.4.1.307.1.1.2.20.7
Fan restored trap. The variable bindings in the Trap packet provide information about the chassis name, fan number and the trap status. This Trap is issued when the failed fan is restored. This trap must be cleared manually.
       lucentPM4BoardTempWarnTrap 1.3.6.1.4.1.307.1.1.2.20.8
Board temperature warning trap. The variable bindings in the Trap packet provide information about the chassis name, unit and the trap status. This Trap is issued when the board temperature exceeds a set threshold value. This trap must be cleared manually.
       lucentPM4BoardTempNormalTrap 1.3.6.1.4.1.307.1.1.2.20.9
Board temperature normal trap. The variable bindings in the Trap packet provide information about the chassis name, unit and the trap status. This Trap is issued when the board temperature returns to normal. This trap must be cleared manually.
       lucentPM4BoardTooHotTrap 1.3.6.1.4.1.307.1.1.2.20.10
Board trap. The variable bindings in the Trap packet provide information about the chassis name, board number and the trap status. This Trap must be cleared manually.
       lucentPM4ModemFailTrap 1.3.6.1.4.1.307.1.1.2.20.11
Modem failure trap. The variable bindings in the Trap packet provide information about the chassis name, modem number and the trap status. This Trap must be cleared manually.
       lucentPM4T1E1LineDownTrap 1.3.6.1.4.1.307.1.1.2.20.12
T1/E1 Line trap. The variable bindings in the Trap packet provide all the information for the clients to display the Board ID, Line ID and the status of the line. This Trap could be generated when the line comes up or goes down once. It must be cleared manually.
       lucentPM4T1E1LineUpTrap 1.3.6.1.4.1.307.1.1.2.20.13
T1/E1 Line trap. The variable bindings in the Trap packet provide all the information for the clients to display the Board ID, Line ID and the status of the line. This Trap could be generated when the line comes up or goes down once. It must be cleared manually.
       lucentPM4T1E1LineThreshTrap 1.3.6.1.4.1.307.1.1.2.20.14
T1/E1 Line trap. The variable bindings in the Trap packet provide all the information for the clients to display the Board ID, Line ID and the trap type. This Trap could be generated when the thresholds for the various performance statistics (ES, SES etc.) exceed. It must be cleared manually.
       lucentPM4BoardPwrOffTrap 1.3.6.1.4.1.307.1.1.2.20.15
This trap is issued when the power supply to the board is not enough. The variable bindings in the Trap packet provide information about the chassis name, board/board number and the trap status. This Trap must be cleared manually.
       lucentPM4RadiusAuthFailTrap 1.3.6.1.4.1.307.1.1.2.20.16
This trap is issued when the Radius authentication fails. This Trap must be cleared manually. The trap provides information about the board and the modem number.