LINKSWITCH-MIB: View SNMP OID List / Download MIB

VENDOR: 3COM


 Home MIB: LINKSWITCH-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 linkSwitch 1.3.6.1.4.1.43.17
       lsSRFilterEnable 1.3.6.1.4.1.43.17.1 integer read-write
When false, the Address Filter forwards Source Routed frames, that is, frames with a 1 in the MSB of the Source Address. When true, the Address Filter does not forward Source Routed frames. Default value is false. DURABLE. Enumeration: 'false': 2, 'true': 1.
       lsSegmentFilterEnable 1.3.6.1.4.1.43.17.2 integer read-write
Controls action taken with Eth frames with source and destination stations on the same segment (i.e. port). When true, the Address Filter will not forward intra-segment frames. When false, all frames received are forwarded. Default is true. DURABLE. Enumeration: 'false': 2, 'true': 1.
       lsMcastFilterEnable 1.3.6.1.4.1.43.17.3 integer read-write
When false, all frames with a Multicast Destination Address that does not match any Address Filter entry are forwarded to all ports. Those with a match are forwarded to port. When true, only frames with a Multicast Destination Address with a match in the Address Filter are forwarded to port. Default is false. DURABLE. Enumeration: 'false': 2, 'true': 1.
       lsLoopDetectAction 1.3.6.1.4.1.43.17.4 integer read-write
If a station appears to be on two ports, Address Filter thrashing will occur. Detection of this situation is possible, and this object controls the action to be taken when the situation is detected. Default is shutport. no-action means that no action will be taken, but this means Ethernet and FDDI networks will be flooded. NOTE: control of traps indicating the condition is not affected. DURABLE. Enumeration: 'shuteths': 2, 'shutunit': 3, 'no-action': 4, 'shutport': 1.
       lsAddressAgingTimer 1.3.6.1.4.1.43.17.5 counter read-write
A count of the seconds that will elapse before the Address Filter contents are 'aged' to remove entries which are not active. Default is 1800, or 30 minutes. Write 0 to stop aging process from occuring. DURABLE.
       lsIPEchoAgingHelp 1.3.6.1.4.1.43.17.6 integer read-write
If true, an IP echo frame will be broadcast on the subnet, which will cause otherwise quiecient stations to become active. The rate is half of lsAddressAgingTimer. DURABLE. Enumeration: 'false': 2, 'true': 1.
       lsProdVerSW 1.3.6.1.4.1.43.17.7 displaystring read-only
This describes the version of the software currently running. Returns a string in the form X.YZ, where X represents the major version, Y represents the minor version or revision, and Z represents the development level of the revision.
       lsProdVerHW 1.3.6.1.4.1.43.17.8 displaystring read-only
This describes the version of the hardware currently running. Returns a string in the form X.YZ, where X represents the major version, Y represents the minor version or revision, and Z represents the development level of the revision.
       lsLEDstate 1.3.6.1.4.1.43.17.9 octet string read-only
A binary structure which describes the current state of all of the LEDs of an LinkSwitch. Actual layout available on request.
       lsTestResult 1.3.6.1.4.1.43.17.10 integer read-only
When a test is initiated via lsAction, the result of the test is stored in this variable when the test has completed or failed. The value varies by test, is set to one (other) at the start of the test.
       lsAction 1.3.6.1.4.1.43.17.11 integer read-write
Value when read will be other. Writing a value to this object will result in the associated action taking place. Note that it is possible to disconnect the management station from the LinkSwitch by issuing the disconnect-FDDI or disconnect-Eth actions, depending of course where the management station is connected to the LinkSwitch. For those actions which are tests, the result is in lsTestResult. If the action is disconnect-FDDI, the FDDI ring will function internally for inter-segment frames. Enumeration: 'age-addr-table': 2, 'clear-addr-table': 3, 'test-addr-filter': 11, 'test-fddipath': 8, 'test-ethports': 9, 'connect-FDDI': 5, 'other': 1, 'test-lsfunc': 10, 'connect-Eth': 7, 'disconnect-Eth': 6, 'disconnect-FDDI': 4.
       lsEportNumber 1.3.6.1.4.1.43.17.12 integer read-only
A count of the Ethernet Ports supported by this system.
       lsEportTable 1.3.6.1.4.1.43.17.13 no-access
             lsEportEntry 1.3.6.1.4.1.43.17.13.1 no-access
                 lsEportIndex 1.3.6.1.4.1.43.17.13.1.1 integer read-only
The index of this table entry.
                 lsEportEnable 1.3.6.1.4.1.43.17.13.1.2 integer read-write
When false, port is in reset state, so no port (Ethernet) traffic will go through. When enabled, functionality is further controlled by lsEportActivate and ifOperStatus. Default is true. DURABLE. Enumeration: 'false': 2, 'true': 1.
                 lsEportActivate 1.3.6.1.4.1.43.17.13.1.3 integer read-write
When true, port is shutdown but not reset, so counters will maintain values at time of deactivation. Further functionality controlled by ifOperStatus. Default is true. Enumeration: 'false': 2, 'true': 1.
                 lsEportLinkState 1.3.6.1.4.1.43.17.13.1.4 integer read-only
Reports status of Link, as affected by lsEportEnable, lsEportActive, lsEportForwarding, and ifOperStatus. Enumeration: 'inactive': 3, 'disabled': 2, 'active': 5, 'other': 1, 'shutdown': 6, 'ready': 4.
                 lsEportName 1.3.6.1.4.1.43.17.13.1.5 displaystring read-write
Abstract name for port. DURABLE.
                 lsEportSQETestEnable 1.3.6.1.4.1.43.17.13.1.6 integer read-write
When true, SQE test (heartbeat) will occur after each frame transmitted by Ethernet MAC. Need not be disabled for those ports which are connected to a repeater because Eth ports have a MAC. Default is true. DURABLE. Enumeration: 'false': 2, 'true': 1.
                 lsEportLongPktsEnable 1.3.6.1.4.1.43.17.13.1.7 integer read-write
When true, frames with lengths longer than Ethernet maximum will be allowed to go from FDDI to Ethernet and Ethernet to FDDI. Default is false. DURABLE. Enumeration: 'false': 2, 'true': 1.
                 lsEportMCastFilterEnable 1.3.6.1.4.1.43.17.13.1.8 integer read-write
When true, filtering will occur based on the values of lsEportMCastRate and lsEportMCastBurstLimit. If false, there is no port-level filtering performed on multicasts. Default is false. DURABLE. Enumeration: 'false': 2, 'true': 1.
                 lsEportMCastRate 1.3.6.1.4.1.43.17.13.1.9 integer read-write
The rate in frames/second that multicasts will not be allowed to exceed, when lsEportBcastFilterEnable is true. Must also set lsEportMCastBurstLimit to non-zero value. DURABLE.
                 lsEportMCastBurstLimit 1.3.6.1.4.1.43.17.13.1.10 integer read-write
This specifies the maximum number of multicasts that can be forwarded from FDDI to Ethernet port in a 'burst' before the lsEportBCastRate limit causes frames to be discarded Must also set lsEportMCastBurstLimit to non-zero value. If this to zero, all multicasts are discarded. DURABLE.
                 lsEportStationsNumber 1.3.6.1.4.1.43.17.13.1.11 integer read-only
A count of stations whose Physical Address has been detected in the Source Address field of a frame which was transmitted by a station connected to this port.
                 lsEportSecsSinceLastClear 1.3.6.1.4.1.43.17.13.1.12 counter read-only
A count of seconds since last cleared counters for this port. Use lsEportAction to clear the counters.
                 lsEportTestResult 1.3.6.1.4.1.43.17.13.1.13 integer read-only
When a test is initiated via lsEportAction, the result of the test is stored in this variable when the test has completed or failed. The value varies by test, is set to one (other) at the start of the test.
                 lsEportAction 1.3.6.1.4.1.43.17.13.1.14 integer read-write
Value when read will be other. Writing a value to this object will result in the associated action taking place. For those actions which are tests, the result is in lsEportTestResult. Enumeration: 'other': 1, 'test-addrfilter': 3, 'zero-counters': 4, 'test-loopback': 2.
                 lsEportFtoEByteCts 1.3.6.1.4.1.43.17.13.1.15 counter read-only
A count of bytes that were forwarded from the FDDI MAC to the Ethernet through the Address Filter. The count per frame includes the packet's bytes as received by the FDDI MAC (FCS removed), plus a number of overhead bytes used internally.
                 lsEportEtoFByteCts 1.3.6.1.4.1.43.17.13.1.16 counter read-only
A count of bytes that were forwarded from the Ethernet MAC to the Address Filter. The count per packet includes the byte count indicated by the Ethernet MAC (without FCS), plus a number of overhead bytes used internally.
                 lsEportFtoEPacketCts 1.3.6.1.4.1.43.17.13.1.17 counter read-only
A count of frames that were forwarded from the FDDI MAC to the Ethernet MAC through the Address Filter. The count is the number of frames that the Ethernet MAC was able to transmit.
                 lsEportEtoFPacketCts 1.3.6.1.4.1.43.17.13.1.18 counter read-only
A count of frames that were forwarded trom the Ethernet MAC to the Address Filter. The count is the number of frames received without error by the Ethernet MAC. Packets may be not-forwarded by the Address Filter and some may encounter error conditions, so it is necessary to subtract the value of lslEportEtoFDropPktCts for the true number of frames.
                 lsEportFtoEDropPktCts 1.3.6.1.4.1.43.17.13.1.19 counter read-only
A count of frames that were dropped as they went from the FDDI to the Ethernet through the Address Filter. Frames may be dropped due to resource constraints.
                 lsEportEtoFDropPktCts 1.3.6.1.4.1.43.17.13.1.20 counter read-only
A count of frames that were dropped before reaching the FDDI MAC. Include in this value are frames encountering resource constraints, as well as frames which did not need to be forwarded onto the FDDI (i.e., local intra-segment traffic).
                 lsEportFtoEBusErrorCts 1.3.6.1.4.1.43.17.13.1.21 counter read-only
A count of frames that encountered a Parity or FIFO Error as they went from FDDI to the Ethernet.
                 lsEportEtoFBusErrorCts 1.3.6.1.4.1.43.17.13.1.22 counter read-only
A count of frames that encountered a Parity or FIFO Error as they went from Ethernet to the FDDI.
                 lsEportXMCastCts 1.3.6.1.4.1.43.17.13.1.23 counter read-only
A count of frames transmitted to a multicast address. Does not include frames sent to the broadcast address.
                 lsEportXBCastCts 1.3.6.1.4.1.43.17.13.1.24 counter read-only
A count of frames transmitted to a broadcast address. Does not include frames sent to the multicast address.
                 lsEportXDirectedCts 1.3.6.1.4.1.43.17.13.1.25 counter read-only
A count of frames transmitted that were not addressed to either the multicast or the broadcast address.
                 lsEportXDeferredCts 1.3.6.1.4.1.43.17.13.1.26 counter read-only
A count of frames for which the first transmission attempt is delayed because the medium is busy. The count does not include frames involved in collisions.
                 lsEportXLateCollCts 1.3.6.1.4.1.43.17.13.1.27 counter read-only
A count of times that a collision is detected later 512 bit-times into the transmission of a packet. A late collision is also considered as a generic collision for purposes of other collision-related counters.
                 lsEportXCollAbortCts 1.3.6.1.4.1.43.17.13.1.28 counter read-only
A count of frames for which transmission fails due to excessive collisions.
                 lsEportXCSErrCts 1.3.6.1.4.1.43.17.13.1.29 counter read-only
A count of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame.
                 lsEportXExcessDeferCts 1.3.6.1.4.1.43.17.13.1.30 counter read-only
A count of times that the deferral time was excessive.
                 lsEportXUnderrunCts 1.3.6.1.4.1.43.17.13.1.31 counter read-only
A count of times that an underrun occured.
                 lsEportXSQETestFailCts 1.3.6.1.4.1.43.17.13.1.32 counter read-only
A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same document.
                 lsEportRMCastCts 1.3.6.1.4.1.43.17.13.1.33 counter read-only
A count of frames received with a multicast address. Does not include frames received with a broadcast address.
                 lsEportRBCastCts 1.3.6.1.4.1.43.17.13.1.34 counter read-only
A count of frames received with a broadcast address. Does not include frames received with a multicast address.
                 lsEportRDirectedCts 1.3.6.1.4.1.43.17.13.1.35 counter read-only
A count of frames received that were not addressed to either the multicast or the broadcast address.
                 lsEportRAlignmentCts 1.3.6.1.4.1.43.17.13.1.36 counter read-only
A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the 'alignment error' status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
                 lsEportRTooLongCts 1.3.6.1.4.1.43.17.13.1.37 counter read-only
A count of frames which were received and also exceeded the maximum frame size.
                 lsEportRFCSErrorCts 1.3.6.1.4.1.43.17.13.1.38 counter read-only
A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC.
                 lsEportROverrunCts 1.3.6.1.4.1.43.17.13.1.39 counter read-only
The number of frames which could not be stored by the Ethernet MAC due to internal resource constraints.
       lsStationsNumber 1.3.6.1.4.1.43.17.14 integer read-only
A count of stations whose Physical Address has been detected in the Source Address field of a frame which was transmitted by a station connected to an Ethernet port. Equals the total of all of the per-port stations counts.
       lsStationsTable 1.3.6.1.4.1.43.17.15 no-access
             lsStationsEntry 1.3.6.1.4.1.43.17.15.1 no-access
                 lsStationsPortIndex 1.3.6.1.4.1.43.17.15.1.1 integer read-only
The lsEportIndex of the port to which the addresses apply.
                 lsStationsAddrIndex 1.3.6.1.4.1.43.17.15.1.2 integer read-only
The index of this address within a row of the table lsStationsTable, where the row is selected by the value of lsStationsPortIndex.
                 lsStationsAddress 1.3.6.1.4.1.43.17.15.1.3 physaddress read-only
A Physical Address which has been seen as a Source Address on this port since the last time the Address Filter was aged.
       lsBusCts 1.3.6.1.4.1.43.17.16 octet string read-only
A binary structure which contains the FtoE and EtoF counters for all ls ports. Actual layout available on request.
       lsPortAMediaPresent 1.3.6.1.4.1.43.17.17 integer read-only
Reports presence and type of FDDI Port A Media. For FMS LinkSwitch, only Fiber and UTP are supported. Enumeration: 'fiberpresent': 3, 'other': 1, 'fiberscpresent': 4, 'notpresent': 2, 'utppresent': 5, 'stppresent': 6.
       lsPortBMediaPresent 1.3.6.1.4.1.43.17.18 integer read-only
Reports presence and type of FDDI Port B Media. For FMS LinkSwitch, only Fiber and UTP are supported. Enumeration: 'fiberpresent': 3, 'other': 1, 'fiberscpresent': 4, 'notpresent': 2, 'utppresent': 5, 'stppresent': 6.
       lsFMSBackupPSSense 1.3.6.1.4.1.43.17.19 integer read-only
Reports the presence and status of the backup power supply on FMS LinkSwitch Only. Enumeration: 'notpresent': 2, 'other': 1, 'badstatus': 4, 'goodstatus': 3.
       lsfddiPATHRingLatency 1.3.6.1.4.1.43.17.20 integer read-only
Reports the measurement (in 80 nanosecond ticks) of total accumulated latency of the ring associated with the current path.