LIGO-W-JET-MIB: View SNMP OID List / Download MIB

VENDOR: LIGOWAVE


 Home MIB: LIGO-W-JET-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-MIB, SNMPv2-SMI, LIGOWAVE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ligoWJetMIB 1.3.6.1.4.1.32750.3.6
The LigoWave W-Jet Protocol MIB.
     ligoWJetMIBObjects 1.3.6.1.4.1.32750.3.6.1
         ligoWJetNotifs 1.3.6.1.4.1.32750.3.6.1.0
             wJetNodeConnected 1.3.6.1.4.1.32750.3.6.1.0.1
This notification is sent on new node connection.
             wJetNodeDisconnected 1.3.6.1.4.1.32750.3.6.1.0.2
This notification is sent when node disconnects.
             wJetLowSignalStrength 1.3.6.1.4.1.32750.3.6.1.0.3
This notification is sent when RSSI becomes lower than threshold.
             wJetRxDroppedThresholdReached 1.3.6.1.4.1.32750.3.6.1.0.4
This notification is sent when delta of wJetP2pRxDropped becomes bigger than threshold.
             wJetTxRetriesThresholdReached 1.3.6.1.4.1.32750.3.6.1.0.5
This notification is sent when delta of wJetP2pTxTotalRetries becomes bigger than threshold.
         ligoWJetInfo 1.3.6.1.4.1.32750.3.6.1.1
         ligoWJetConf 1.3.6.1.4.1.32750.3.6.1.2
             wJetWrlssIfConfTable 1.3.6.1.4.1.32750.3.6.1.2.1 no-access
Wireless interface configuration table with W-Jet protocol specific entries.
                 wJetWrlssIfConfEntry 1.3.6.1.4.1.32750.3.6.1.2.1.1 no-access
Wireless interface configuration table entry with W-Jet protocol specific entries.
                     wJetIfIndex 1.3.6.1.4.1.32750.3.6.1.2.1.1.1 interfaceindex no-access
Wireless interface index corresponds to ifIndex in MIB-II interfaces table.
                     wJetIfProtoEnabled 1.3.6.1.4.1.32750.3.6.1.2.1.1.2 truthvalue read-only
W-Jet protocol enabled on this interface.
                     wJetIfDataRate 1.3.6.1.4.1.32750.3.6.1.2.1.1.3 integer32 read-only
Data transmission rate.
                     wJetIfAckRate 1.3.6.1.4.1.32750.3.6.1.2.1.1.4 integer32 read-only
Data transmission rate for management packets.
                     wJetIfAckTimeout 1.3.6.1.4.1.32750.3.6.1.2.1.1.5 integer32 read-only
Timeout value for management packets.
                     wJetIfTxQueueMaxLength 1.3.6.1.4.1.32750.3.6.1.2.1.1.6 integer32 read-only
Maximum number of frames in transmission queue.
                     wJetIfRxTimeout 1.3.6.1.4.1.32750.3.6.1.2.1.1.7 integer32 read-only
Frame reception timeout.
                     wJetIfMaxAggregBytes 1.3.6.1.4.1.32750.3.6.1.2.1.1.8 integer32 read-only
Aggregation limit.
                     wJetIfMaxAggregPackets 1.3.6.1.4.1.32750.3.6.1.2.1.1.9 integer32 read-only
Maximum packet count to be aggregated in one radio frame.
                     wJetIfCcaThreshold 1.3.6.1.4.1.32750.3.6.1.2.1.1.10 integer32 read-only
Clear Channel Assessment sensitivity threshold.
         ligoWJetStats 1.3.6.1.4.1.32750.3.6.1.3
             wJetP2pEndpStatsTable 1.3.6.1.4.1.32750.3.6.1.3.1 no-access
W-Jet endpoint statistics table for Point-to-Point links.
                 wJetP2pEndpStatsEntry 1.3.6.1.4.1.32750.3.6.1.3.1.1 no-access
W-Jet endpoint statistics table entry for Point-to-Point links.
                     wJetP2pLocalIfIndex 1.3.6.1.4.1.32750.3.6.1.3.1.1.1 interfaceindex no-access
Wireless interface index corresponds to ifIndex in MIB-II interfaces table.
                     wJetP2pEndpointType 1.3.6.1.4.1.32750.3.6.1.3.1.1.2 integer no-access
Endpoint type. Enumeration: 'remote': 1, 'local': 0.
                     wJetP2pMacAddress 1.3.6.1.4.1.32750.3.6.1.3.1.1.3 macaddress read-only
Endpoint MAC address.
                     wJetP2pRssi 1.3.6.1.4.1.32750.3.6.1.3.1.1.4 gauge32 read-only
Received signal strength for this endpoint.
                     wJetP2pMaxRssi 1.3.6.1.4.1.32750.3.6.1.3.1.1.5 gauge32 read-only
Maximum possible signal strength value for this endpoint.
                     wJetP2pSignalLevel 1.3.6.1.4.1.32750.3.6.1.3.1.1.6 integer32 read-only
Endpoint's signal level.
                     wJetP2pNoiseLevel 1.3.6.1.4.1.32750.3.6.1.3.1.1.7 integer32 read-only
Endpoint's background noise level.
                     wJetP2pTxPower 1.3.6.1.4.1.32750.3.6.1.3.1.1.8 gauge32 read-only
Transmission power.
                     wJetP2pRxStart 1.3.6.1.4.1.32750.3.6.1.3.1.1.9 counter32 read-only
Number of RX window Start packets received.
                     wJetP2pTxStart 1.3.6.1.4.1.32750.3.6.1.3.1.1.10 counter32 read-only
Number of TX window Start packets transmitted.
                     wJetP2pRxStop 1.3.6.1.4.1.32750.3.6.1.3.1.1.11 counter32 read-only
Number of RX window Stop packets received. There is no TX stops counter as it will always be equal to number of the TX start packets.
                     wJetP2pRxBytes 1.3.6.1.4.1.32750.3.6.1.3.1.1.12 counter32 read-only
Number of received bytes.
                     wJetP2pTxBytes 1.3.6.1.4.1.32750.3.6.1.3.1.1.13 counter32 read-only
Number of transmitted bytes.
                     wJetP2pRxPackets 1.3.6.1.4.1.32750.3.6.1.3.1.1.14 counter32 read-only
Number of received packets.
                     wJetP2pTxPackets 1.3.6.1.4.1.32750.3.6.1.3.1.1.15 counter32 read-only
Number of transmitted packets.
                     wJetP2pTxAcked 1.3.6.1.4.1.32750.3.6.1.3.1.1.16 counter32 read-only
Number of packets acknowledged by the receiver.
                     wJetP2pRxDuplicated 1.3.6.1.4.1.32750.3.6.1.3.1.1.17 counter32 read-only
Number of duplicated packets.
                     wJetP2pRxDropped 1.3.6.1.4.1.32750.3.6.1.3.1.1.18 counter32 read-only
Number of dropped packets.
                     wJetP2pRxTimeouts 1.3.6.1.4.1.32750.3.6.1.3.1.1.19 counter32 read-only
Number of receive timeouts.
                     wJetP2pTxTimeouts 1.3.6.1.4.1.32750.3.6.1.3.1.1.20 counter32 read-only
Number of transmit timeouts.
                     wJetP2pRxNoRetries 1.3.6.1.4.1.32750.3.6.1.3.1.1.21 counter32 read-only
Number of packets that were received without retries.
                     wJetP2pTxNoRetries 1.3.6.1.4.1.32750.3.6.1.3.1.1.22 counter32 read-only
Number of packets that were transmitted without retries.
                     wJetP2pRx1Retry 1.3.6.1.4.1.32750.3.6.1.3.1.1.23 counter32 read-only
Number of packets received with 1 retry.
                     wJetP2pTx1Retry 1.3.6.1.4.1.32750.3.6.1.3.1.1.24 counter32 read-only
Number of packets transmitted with 1 retry.
                     wJetP2pRx2Retries 1.3.6.1.4.1.32750.3.6.1.3.1.1.25 counter32 read-only
Number of packets received with 2 retries.
                     wJetP2pTx2Retries 1.3.6.1.4.1.32750.3.6.1.3.1.1.26 counter32 read-only
Number of packets transmitted with 2 retries.
                     wJetP2pRx3Retries 1.3.6.1.4.1.32750.3.6.1.3.1.1.27 counter32 read-only
Number of packets received with 3 retries.
                     wJetP2pTx3Retries 1.3.6.1.4.1.32750.3.6.1.3.1.1.28 counter32 read-only
Number of packets transmitted with 3 retries.
                     wJetP2pTxTotalRetries 1.3.6.1.4.1.32750.3.6.1.3.1.1.29 counter32 read-only
Total number of attempts to retransmit data packets.
                     wJetP2pTxMaxRetries 1.3.6.1.4.1.32750.3.6.1.3.1.1.30 counter32 read-only
The maximum number of attempts to retransmit data packets. For example if data packet was retransmitted in 9th attempt, the value of this field will be 9.
                     wJetP2pIpAddress 1.3.6.1.4.1.32750.3.6.1.3.1.1.31 ipaddress read-only
The device IP address.