LEXMARK-PVT-MIB: View SNMP OID List / Download MIB

VENDOR: LEXMARK INTERNATIONAL


 Home MIB: LEXMARK-PVT-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lexmark 1.3.6.1.4.1.641
         adapter 1.3.6.1.4.1.641.1
             opsys 1.3.6.1.4.1.641.1.1
                 opsysCodeRev 1.3.6.1.4.1.641.1.1.1 displaystring read-only
A textual identification of network adapter's firmware revision level. For example: 7.15.1
                 opsysJobTimeout 1.3.6.1.4.1.641.1.1.2 integer read-write
The adapter job timeout period in seconds.
                 opsysCurrentJob 1.3.6.1.4.1.641.1.1.3 displaystring read-only
A textual description of the currently printing job containing the Source NOS, Source server, Source user, Job number, and Job size, separated by CR LF. A NULL string indicates no active job. For multiport adapters, this reflects job status of printer port 1.
                 opsysRAMSize 1.3.6.1.4.1.641.1.1.4 integer read-only
The size of the network adapter's RAM in bytes.
                 opsysNVRAMSize 1.3.6.1.4.1.641.1.1.5 integer read-only
The size of the network adapter's NVRAM in bytes.
                 opsysROMSize 1.3.6.1.4.1.641.1.1.6 integer read-only
The size of the network adapter's ROM in bytes.
                 opsysROMType 1.3.6.1.4.1.641.1.1.7 displaystring read-only
A textual description of the network adapter's ROM technology. Currently valid types are: MASK_ROM, OTP, FLASH, UV_EPROM, EEPROM, and OTHER.
                 opsysProtocols 1.3.6.1.4.1.641.1.1.8 integer read-only
A bitmap representing the protocols supported by the network adapter. Bit Value Protocol --- ----- ---------- 0 1 LexLink 1 2 Netware 2 4 AppleTalk 3 8 TCP/IP 4 16 reserved 5 32 reserved 6 64 NDS
                 opsysTimeToReset 1.3.6.1.4.1.641.1.1.9 integer read-write
The amount of time remaining until the adapter performs a power on reset. A value of -1 indicates no reset is scheduled. Setting to 0 causes the adapter to reset immediately. The only valid set value is 0.
                 opsysCardPartNo 1.3.6.1.4.1.641.1.1.10 displaystring read-only
A textual representation of the network adapter's part number.
                 opsysCardEC 1.3.6.1.4.1.641.1.1.11 displaystring read-only
A textual representation of the network adapter's EC level.
                 opsysCurrentJobTable 1.3.6.1.4.1.641.1.1.12 no-access
A table of current job information for each of the network adapter's printer ports.
                       opsysCurrentJobEntry 1.3.6.1.4.1.641.1.1.12.1 no-access
An entry containing job information for one printer port.
                           opsysCurrentJobEntryIndex 1.3.6.1.4.1.641.1.1.12.1.1 integer read-only
A unique value used by the adapter to identify job information for one printer port. Each entry corresponds to a value lexhdwrPortTableIndex.
                           opsysCurrentJobString 1.3.6.1.4.1.641.1.1.12.1.2 displaystring read-only
A textual description of the this printer port's currently printing job containing the Source NOS, Source server, Source user, Job number, and Job size, separated by CR LF. A NULL string indicates no active job.
                 opsysDeviceType 1.3.6.1.4.1.641.1.1.13 octet string read-only
A two byte code representing the adapter's type.
                 opsysAdapterName 1.3.6.1.4.1.641.1.1.14 octet string read-only
A Unicode representation of the adapter's name.
                 opsysAdapterCapabilities 1.3.6.1.4.1.641.1.1.15 octet string read-only
A bitmap representing the capabilities of the adapter. Bit Value Frame type --- ---------- -------------------------- 31 0x80000000 NPANT via Netware and IP 30 0x40000000 Receive-only Fax 29 0x20000000 reserved 28 0x10000000 Adapter HTTP 27 0x08000000 Printer HTTP 26 0x04000000 HTTP Configuration Page 25 0x02000000 Copier Option
             lexlink 1.3.6.1.4.1.641.1.2
                 lexlinkActivated 1.3.6.1.4.1.641.1.2.1 integer read-write
The activation status of the LexLink protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. Enumeration: 'on': 2, 'off': 1.
                 lexlinkNickname 1.3.6.1.4.1.641.1.2.2 displaystring read-write
The nickname assigned to the adapter for the LexLink protocol. Note that some adapters may not support the maximum length.
             lexipx 1.3.6.1.4.1.641.1.3
                 lexipxActivated 1.3.6.1.4.1.641.1.3.1 integer read-write
The activation status of the Netware protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. Enumeration: 'on': 2, 'off': 1.
                 lexipxLoginName 1.3.6.1.4.1.641.1.3.2 displaystring read-write
The adapter's Netware login name. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset.
                 lexipxNetNumber 1.3.6.1.4.1.641.1.3.3 displaystring read-only
The network number of the Netware network to which the adapter is connected.
                 lexipxSAPMode 1.3.6.1.4.1.641.1.3.4 integer read-write
The network adapter's current Netware SAP'ing status. Enumeration: 'on': 2, 'off': 1.
                 lexipxServerMode 1.3.6.1.4.1.641.1.3.5 integer read-write
The current Netware server mode of the adapter. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. Enumeration: 'rprinter': 2, 'pserver': 1.
                 lexipxNumPorts 1.3.6.1.4.1.641.1.3.6 integer read-only
The number of Netware printer ports.
                 lexipxPortInfoTable 1.3.6.1.4.1.641.1.3.7 no-access
A table of Netware printer port information.
                     lexipxPortInfoEntry 1.3.6.1.4.1.641.1.3.7.1 no-access
An entry containing Netware printer port information.
                         lexipxPortInfoIndex 1.3.6.1.4.1.641.1.3.7.1.1 integer read-only
A unique value used by the adapter to identify Netware printer ports.
                         lexipxPortInfoPollIntvl 1.3.6.1.4.1.641.1.3.7.1.2 integer read-write
The Netware queue polling interval for this printer port.
                         lexipxPortInfoEnable 1.3.6.1.4.1.641.1.3.7.1.3 integer read-write
The Netware queue status of this printer port. Enumeration: 'disabled': 1, 'enabled': 2.
                         lexipxPortInfoBannerPage 1.3.6.1.4.1.641.1.3.7.1.4 integer read-only
The Netware queue banner page status for this printer port. Enumeration: 'postscript': 2, 'ascii': 3, 'off': 1.
                 lexipxNumPrefServers 1.3.6.1.4.1.641.1.3.8 integer read-only
The maximum number of preferred Netware servers supported by this network adapter.
                 lexipxPrefSrvrTable 1.3.6.1.4.1.641.1.3.9 no-access
A table of the network adapter's preferred Netware servers.
                     lexipxPrefSrvrEntry 1.3.6.1.4.1.641.1.3.9.1 no-access
An entry containing preferred Netware server information.
                         lexipxPrefSrvrIndex 1.3.6.1.4.1.641.1.3.9.1.1 integer read-only
A unique value used by the adapter to identify preferred Netware servers.
                         lexipxPrefSrvrName 1.3.6.1.4.1.641.1.3.9.1.2 displaystring read-write
The name of this preferred Netware server. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset.
                 lexipxConnSrvrTable 1.3.6.1.4.1.641.1.3.10 no-access
A table of connected Netware server information.
                       lexipxConnSrvrEntry 1.3.6.1.4.1.641.1.3.10.1 no-access
An entry containing connected Netware server information.
                           lexipxConnSrvrIndex 1.3.6.1.4.1.641.1.3.10.1.1 integer read-only
A unique value used by the adapter to identify connected Netware servers.
                           lexipxConnSrvrName 1.3.6.1.4.1.641.1.3.10.1.2 displaystring read-only
The name of this connected Netware server.
                           lexipxConnSrvrNet 1.3.6.1.4.1.641.1.3.10.1.3 displaystring read-only
The Netware network number of this connected Netware server.
                           lexipxConnSrvrNode 1.3.6.1.4.1.641.1.3.10.1.4 displaystring read-only
The Netware node address of the connected Netware server.
                           lexipxConnSrvrConnNum 1.3.6.1.4.1.641.1.3.10.1.5 integer read-only
The connection number of the connected Netware server (pserver mode only).
                           lexipxConnSrvrConnId 1.3.6.1.4.1.641.1.3.10.1.6 integer read-only
The connection ID of the connected Netware server (rprinter mode only).
                           lexipxConnSrvrPSConnID 1.3.6.1.4.1.641.1.3.10.1.7 integer read-only
The connection ID of the connected Netware pserver (rprinter mode only).
                 lexipxFrameType 1.3.6.1.4.1.641.1.3.11 integer read-write
A bitmap of the supported IPX frame types. Bit Value Frame type --- ----- -------------------------- 0 1 Token-Ring 1 2 Token-Ring Source Routed 2 4 Token-Ring SNAP 3 8 Token-Ring SNAP Source Routed 4 16 Ethernet 802.2 5 32 Ethernet 802.3 6 64 Ethernet Type 2 7 128 Ethernet SNAP
                 lexipxTrapTable 1.3.6.1.4.1.641.1.3.12 no-access
A table of IPX trap destination configurations.
                       lexipxTrapEntry 1.3.6.1.4.1.641.1.3.12.1 no-access
An entry containing an IPX trap destination's configuration.
                           lexipxTrapIndex 1.3.6.1.4.1.641.1.3.12.1.1 integer read-only
A unique value used by the adapter to identify IPX trap destinations.
                           lexipxTrapMask 1.3.6.1.4.1.641.1.3.12.1.2 integer read-write
The trap mask for the trap destination. It is implemented as a bitmap specifying a mask of intervention required conditions for which the adapter should send trap messages. Setting a bit to 1 enables the corresponding trap. A value of 511 will cause the adapter to send traps for all intervention required conditions. The bitmap is defined below: Bit Value Condition --- ----- -------------------------- 0 1 Output hopper full 1 2 Load Paper 2 4 Paper Jam 3 8 Toner Low 4 16 Service Required 5 32 Disk Error 6 64 Cover Opened 7 128 Page Complexity Error 8 256 Offline
                           lexipxTrapNetworkAddress 1.3.6.1.4.1.641.1.3.12.1.3 octet string read-write
The IPX network address of the trap destination. (4 bytes)
                           lexipxTrapNodeAddress 1.3.6.1.4.1.641.1.3.12.1.4 octet string read-write
The IPX node address of the trap destination. (6 bytes)
                 lexipxTrapType 1.3.6.1.4.1.641.1.3.13 integer read-write
The type of SNMP over IPX traps that will be sent by the adapter. Setting this variable to multiplexed(1) configures all intervention required conditions to send an irCondition trap (specific trap number 1) and for the clearing of intervention required conditions to send an irCleared trap (specific trap number 0). Setting this variable to individual(2) causes each intervention required condition to send its corresponding trap (specific traps numbered 2 through 10) and for the clearing of intervention required conditions to cause an irClearedTypeII trap (specific trap number 11). See the Trap Definitions Group for more information. Individual(2) is the default for IPX and is necessary for NMS annotations. Enumeration: 'individual': 2, 'multiplexed': 1.
                 lexipxGSQ 1.3.6.1.4.1.641.1.3.14 integer read-write
The General Service Query (GSQ) interval. This is the period in seconds that the adapter waits after a failed GSQ before attempting another as it searches for Netware servers.
             lextalk 1.3.6.1.4.1.641.1.4
                 lextalkActivated 1.3.6.1.4.1.641.1.4.1 integer read-write
The activation status of the AppleTalk protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. Enumeration: 'on': 2, 'off': 1.
                 lextalkAddress 1.3.6.1.4.1.641.1.4.2 displaystring read-only
The AppleTalk Address of the network card. This variable is not implemented on the XLe adapters.
                 lextalkName 1.3.6.1.4.1.641.1.4.3 displaystring read-only
The AppleTalk name of this adapter. This variable is not implemented on the XLe adapters.
                 lextalkZone 1.3.6.1.4.1.641.1.4.4 displaystring read-only
The AppleTalk zone name of this adapter. This variable is not implemented on the XLe adapters.
                 lextalkType 1.3.6.1.4.1.641.1.4.5 displaystring read-only
The AppleTalk type of this adapter. This variable is not implemented on the XLe adapters.
             lextcp 1.3.6.1.4.1.641.1.5
                 lextcpActivated 1.3.6.1.4.1.641.1.5.1 integer read-write
The activation status of the TCP/IP Protocol. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. Enumeration: 'on': 2, 'off': 1.
                 lextcpBootpEnable 1.3.6.1.4.1.641.1.5.2 integer read-write
The status of whether or not BOOTP is attempted to determine the IP parameters. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. Enumeration: 'disabled': 1, 'enabled': 2.
                 lextcpAddressServ 1.3.6.1.4.1.641.1.5.3 ipaddress read-only
The IP address of the DHCP, BOOTP, or RARP server that provided the adapter's IP address.
                 lextcpNumNPAPservers 1.3.6.1.4.1.641.1.5.4 integer read-only
The maximum number of concurrent NPAP over TCP server connections.
                 lextcpNPAPserversTable 1.3.6.1.4.1.641.1.5.5 no-access
A table of NPAP over TCP server information.
                     lextcpNPAPserversEntry 1.3.6.1.4.1.641.1.5.5.1 no-access
An entry containing NPAP over TCP server information.
                         lextcpNPAPserverIndex 1.3.6.1.4.1.641.1.5.5.1.1 integer read-only
A unique value used by the adapter to identify NPAP over TCP servers.
                         lextcpNPAPserverAddress 1.3.6.1.4.1.641.1.5.5.1.2 ipaddress read-only
The IP address of this NPAP over TCP server.
                 lexhttp 1.3.6.1.4.1.641.1.5.6
                     lexhttpEnable 1.3.6.1.4.1.641.1.5.6.1 integer read-write
The status of whether the adapter will enable the HTTP server. If this variable is changed, the adapter must be reset before the change will take effect. See opsysTimeToReset. Enumeration: 'disabled': 1, 'enabled': 2.
                     lexhttpNumLinks 1.3.6.1.4.1.641.1.5.6.2 integer read-only
The number of configurable HTTP links for the adapter.
                     lexhttpBytesRemaining 1.3.6.1.4.1.641.1.5.6.3 integer read-only
The number of bytes available to store HTTP link and label information.
                     lexhttpResetLinks 1.3.6.1.4.1.641.1.5.6.4 integer read-write
A control for restoring default values for HTTP link settings. Setting the variable to reset will cause all of the HTTP link settings to be reset to their default values. Enumeration: 'reset': 2, 'noReset': 1.
                     lexhttpLinkTable 1.3.6.1.4.1.641.1.5.6.5 no-access
A table of HTTP Link settings.
                         lexhttpLinkTableEntry 1.3.6.1.4.1.641.1.5.6.5.1 no-access
An entry containing HTTP link settings.
                             lexhttpLinkTableIndex 1.3.6.1.4.1.641.1.5.6.5.1.1 integer read-only
A unique value used by the adapter to identify HTTP link settings.
                             lexhttpLinkTableStatus 1.3.6.1.4.1.641.1.5.6.5.1.2 integer read-write
The status of the HTTP link. Get operation: linkOff -- Server will not display the link personalOn -- Server will display the custom link useDefault -- Write-only defaultOff -- Reserved defaultOn -- Server will display the default link eraseCustom -- Write-only Set operation: linkOff -- Puts the link in linkOff status customOn -- Puts the link in customOn status useDefault -- Clears the Label and URL for this link and puts the . link in defaultOn status defaultOff -- Read-only defaultOn -- Read-only eraseCustom -- Clears the Label and URL for this link and puts the . link in linkOff status Enumeration: 'defaultOn': 5, 'eraseCustom': 6, 'defaultOff': 4, 'linkOff': 1, 'useDefault': 3, 'customOn': 2.
                             lexhttpLinkTableLabel 1.3.6.1.4.1.641.1.5.6.5.1.3 displaystring read-write
The text to be displayed as the label of this HTTP link. It may be set to define a custom link. Note that when read, this always reflects what the server would display. As such, if the status of this link is defaultOn, it will not return your custom label if read even though it has been stored. Setting the status for this link to customOn will activate your custom link label. Remember that setting the status of this link to eraseCustom or useDefault clears this variable.
                             lexhttpLinkTableURL 1.3.6.1.4.1.641.1.5.6.5.1.4 displaystring read-write
The URL to be hyperlinked to by the HTTP link. It may be set to define a custom link. Note that when read, this always reflects what the server would use. As such, if the status of this link is defaultOn, it will not return your custom URL if read even though it has been stored. Setting the status for this link to customOn will activate your custom link URL. Remember that setting the status of this link to eraseCustom or useDefault clears this variable.
                     lexhttpConfigEnable 1.3.6.1.4.1.641.1.5.6.6 integer read-write
The status of whether HTTP configuration page is enabled. Enumeration: 'disabled': 1, 'enabled': 2.
                 lexdhcp 1.3.6.1.4.1.641.1.5.7
                     lexdhcpDhcpEnable 1.3.6.1.4.1.641.1.5.7.1 integer read-write
The status of whether DHCP is enabled. Enumeration: 'disabled': 1, 'enabled': 2.
                     lexdhcpRarpEnable 1.3.6.1.4.1.641.1.5.7.2 integer read-write
The status of whether RARP is enabled. Enumeration: 'disabled': 1, 'enabled': 2.
                     lexdhcpAddressSource 1.3.6.1.4.1.641.1.5.7.3 integer read-only
The method by which the current IP parameters were obtained. Enumeration: 'dhcp': 2, 'manual': 1, 'bootp': 3, 'rarp': 4.
                     lexdhcpWinsStatus 1.3.6.1.4.1.641.1.5.7.4 integer read-only
The adapter's WINS server registration status. Enumeration: 'unregistered': 1, 'registered': 2, 'rejected': 4, 'pending': 3.
                     lexdhcpWinsServer 1.3.6.1.4.1.641.1.5.7.5 ipaddress read-only
The IP address of the WINS server.
                     lexdhcpHostname 1.3.6.1.4.1.641.1.5.7.6 displaystring read-write
The adapter's TCP/IP hostname.
                     lexdhcpLeaseLength 1.3.6.1.4.1.641.1.5.7.7 integer read-only
The length of the adapter's DHCP address lease in seconds.
                     lexdhcpTimetoExpire 1.3.6.1.4.1.641.1.5.7.8 integer read-only
The number of seconds until the DHCP address lease expires.
                     lexdhcpDNSServer 1.3.6.1.4.1.641.1.5.7.9 ipaddress read-write
The IP address of the DNS server.
             lexhdwr 1.3.6.1.4.1.641.1.6
                 lexhdwrNumPorts 1.3.6.1.4.1.641.1.6.1 integer read-only
The number of printer ports supported by this network adapter.
                 lexhdwrPortTable 1.3.6.1.4.1.641.1.6.2 no-access
A table of the adapter's printer port hardware settings.
                     lexhdwrPortTableEntry 1.3.6.1.4.1.641.1.6.2.1 no-access
An entry containing printer port hardware settings.
                         lexhdwrPortTableIndex 1.3.6.1.4.1.641.1.6.2.1.1 integer read-only
A unique value used by the adapter to identify printer ports.
                         lexhdwrPortTableType 1.3.6.1.4.1.641.1.6.2.1.2 integer read-only
The type of attachment for this printer port. Enumeration: 'serial': 3, 'internal': 1, 'parallel': 2.
                         lexhdwrPortTableParm1 1.3.6.1.4.1.641.1.6.2.1.3 integer read-write
For serial and parallel ports, this is the port timeout in seconds. For internal ports, this parameter is unused.
                         lexhdwrPortTableParm2 1.3.6.1.4.1.641.1.6.2.1.4 integer read-write
For serial ports, this is the baud rate in bits per second. For parallel ports, this is the port mode and is defined as follows: standard(0), enhanced(1) For internal ports, this parameter is unused.
                         lexhdwrPortTableParm3 1.3.6.1.4.1.641.1.6.2.1.5 integer read-write
For serial ports, this is the parity and is defined as follows: none(0), odd(1), even(2), space(3), mark(4) For parallel and internal ports, this parameter is unused.
                         lexhdwrPortTableParm4 1.3.6.1.4.1.641.1.6.2.1.6 integer read-write
For serial ports, this is the number of data bits. For parallel and internal ports, this parameter is unused.
                         lexhdwrPortTableParm5 1.3.6.1.4.1.641.1.6.2.1.7 integer read-write
For serial ports, this is the number of stop bits and is defined as follows: bitsOne(2), bitsOneAndHalf(3), bitsTwo(4) For parallel and internal ports, this parameter is unused.
                         lexhdwrPortTableParm6 1.3.6.1.4.1.641.1.6.2.1.8 integer read-write
For serial ports, this is the pacing mode and is defined as follows: paceDtr(0), paceXonXff(1) For non XLe parallel ports, this is the parallel protocol and is defined as follows: auto(2), ecp(3), byte(4), nibble(5), compatible(6) For internal ports, and XLe parallel ports this parameter is unused.
                         lexhdwrPortTableParm7 1.3.6.1.4.1.641.1.6.2.1.9 integer read-write
For all ports, this is the configured NPAP mode. Enumeration: 'on': 2, 'off': 1, 'auto': 3.
                         lexhdwrPortTableParm8 1.3.6.1.4.1.641.1.6.2.1.10 integer read-only
For all ports, this is the NPAP status. Enumeration: 'npapActive': 2, 'npapInactive': 1.
                         lexhdwrPortTableParm9 1.3.6.1.4.1.641.1.6.2.1.11 integer read-write
For serial ports, this is the class of device attached. This variable is unused on the XLe adapters. Enumeration: 'fax': 2, 'printer': 1.
             lexmac 1.3.6.1.4.1.641.1.7
                 lexmacType 1.3.6.1.4.1.641.1.7.1 displaystring read-only
A textual representation of network medium to which the network adapter is attached (e.g. Ethernet).
                 lexmacSpeed 1.3.6.1.4.1.641.1.7.2 gauge read-only
The speed, in bits per second, of the network medium to which the network adapter is attached.
                 lexmacConnType 1.3.6.1.4.1.641.1.7.3 integer read-only
The connection type by which the network adapter is connected to the network medium. Enumeration: 'aui': 1, 'bnc': 2, 'utp': 4, 'stp': 3.
                 lexmacUAA 1.3.6.1.4.1.641.1.7.4 physaddress read-only
The network adapter's universally administered network address.
                 lexmacLAA 1.3.6.1.4.1.641.1.7.5 physaddress read-only
The network adapter's locally administered network address. A value of all zeros indicates that the LAA is not in use.
             lextrap 1.3.6.1.4.1.641.1.8
                 lextrapDestNum 1.3.6.1.4.1.641.1.8.1 integer read-only
The maximum number of IP trap destinations supported by this network adapter.
                 lextrapDestTable 1.3.6.1.4.1.641.1.8.2 no-access
A table of IP trap destination configurations.
                     lextrapDestEntry 1.3.6.1.4.1.641.1.8.2.1 no-access
An entry containing an IP trap destination configuration.
                         lextrapDestIndex 1.3.6.1.4.1.641.1.8.2.1.1 integer read-only
A unique value used by the adapter to identify IP trap destinations.
                         lextrapDestIPAddr 1.3.6.1.4.1.641.1.8.2.1.2 ipaddress read-write
The IP address of the trap destination.
                         lextrapDestMask 1.3.6.1.4.1.641.1.8.2.1.3 integer read-write
The trap mask for the trap destination. It is implemented as a bitmap specifying a mask of intervention required conditions for which the adapter should send trap messages. Setting a bit to 1 enables the corresponding trap. A value of 1023 will cause the adapter to send traps for all intervention required conditions. The bitmap is defined below: Bit Value Condition --- ----- -------------------------- 0 1 Output hopper full 1 2 Load Paper 2 4 Paper Jam 3 8 Toner Low 4 16 Service Required 5 32 Disk Error 6 64 Cover Opened 7 128 Page Complexity Error 8 256 Offline 9 512 Printer MIB (RFC 1759)
                 lextrapIPTrapType 1.3.6.1.4.1.641.1.8.3 integer read-write
The type of SNMP over IP traps that will be sent by the adapter. Setting this variable to multiplexed(1) configures all intervention required conditions to send an irCondition trap (specific trap number 1) and for the clearing of intervention required conditions to send an irCleared trap (specific trap number 0). Setting this variable to individual(2) causes each intervention required condition to send its corresponding trap (specific traps numbered 2 through 10) and for the clearing of intervention required conditions to cause an irClearedTypeII trap (specific trap number 11). See the Trap Definitions Group for more information. Type 1 is the default for IP. Enumeration: 'individual': 2, 'multiplexed': 1.
             time 1.3.6.1.4.1.641.1.9
                 timeReset 1.3.6.1.4.1.641.1.9.1 integer read-write
A control for initiating an update of the system time and date using the specified timeSource. Setting the variable to reset will cause the system to update it's time and date using the specified time source. See timeSource. Enumeration: 'reset': 2, 'noReset': 1.
                 timeSource 1.3.6.1.4.1.641.1.9.2 integer read-write
The source for setting the system time and date. If this variable is changed, the time must be reset before the change will have an effect. See timeReset. Enumeration: 'ntp': 2, 'none': 1, 'netware': 3.
                 timeUTCOffset 1.3.6.1.4.1.641.1.9.3 integer read-write
The offset in minutes from UTC (formerly GMT) of local time. Use a negative value if West of UTC. Use a positive value if East of UTC.
                 timeDSTEnable 1.3.6.1.4.1.641.1.9.4 integer read-write
The status of whether automatic Daylight Savings Time adjust is enabled. See timeDSTStartDate, timeDSTEndDate, and timeDSTOffset for configuration options. Enumeration: 'disabled': 1, 'enabled': 2.
                 timeDSTStartDate 1.3.6.1.4.1.641.1.9.5 octet string read-write
A textual representation of the day and time the Daylight Savings Time adjust should start if enabled (see timeDSTEnable). The format of string is as follows: Byte Meaning ---- ------------------------------------------------------------ 0 Which occurence in the month of the day specified in byte 1. Valid values are: F => First Occurence 1 => First Occurence 2 => Second Occurence 3 => Third Occurence 4 => Fourth Occurence 5 => Fifth Occurence L => Last Occurence 1 A 1-digit field indicating the day of week (0=Sun..6=Sat) 2-3 A 2-digit field indicating the month. 4-5 A 2-digit field indicating the hour 6-7 A 2-digit field indicating the minute 8-9 A 2-digit field indicating the second The default setting is F004020000 which corresponds to the first Sunday of April at 2:00:00 am.
                 timeDSTEndDate 1.3.6.1.4.1.641.1.9.6 octet string read-write
A textual representation of the day and time the Daylight Savings Time adjust should end if enabled (see timeDSTEnable). The format of string is as defined for timeDSTStartDate The default setting is L010020000 which corresponds to the last Sunday of October at 2:00:00 am.
                 timeDSTOffset 1.3.6.1.4.1.641.1.9.7 integer read-write
The offset in minutes that should be applied to local time during Daylight Savings Time.
                 timeServerAddress 1.3.6.1.4.1.641.1.9.8 ipaddress read-write
If the specified time source is NTP (see timeSource), this is the IP address of the NTP server to use. Otherwise, the value is ignored.
                 timeServerName 1.3.6.1.4.1.641.1.9.9 displaystring read-write
If the specified time source is NTP (see timeSource), and the NTP server address is not set (0.0.0.0), this is the DNS domainname of the NTP server. If the specified time source is Netware (see timeSource), the is the name of Netware server. Otherwise, the value is ignored.
         printer 1.3.6.1.4.1.641.2
             prtgen 1.3.6.1.4.1.641.2.1
                 prtgenNumber 1.3.6.1.4.1.641.2.1.1 integer read-only
The number of printers, regardless of their current state, available to this adapter.
                 prtgenInfoTable 1.3.6.1.4.1.641.2.1.2 no-access
A table of the network adapter's attached printer information.
                     prtgenInfoEntry 1.3.6.1.4.1.641.2.1.2.1 no-access
An entry containing attached printer information.
                         prtgenPrinterIndex 1.3.6.1.4.1.641.2.1.2.1.1 integer read-only
A unique value used by the network adapter to identify attached printers.
                         prtgenPrinterName 1.3.6.1.4.1.641.2.1.2.1.2 displaystring read-only
A textual description of the make and model of the attached printer, if known.
                         prtgenPeripheralID 1.3.6.1.4.1.641.2.1.2.1.3 displaystring read-only
A textual description of the peripheral ID of the attached printer as defined by the IEEE 1284 standard, if known.
                         prtgenCodeRevision 1.3.6.1.4.1.641.2.1.2.1.4 displaystring read-only
A textual representation of the code revision level of the attached printer, if known.
                         prtgenResValue 1.3.6.1.4.1.641.2.1.2.1.5 integer read-only
This object is currently unused and reserved.
                         prtgenSerialNo 1.3.6.1.4.1.641.2.1.2.1.6 displaystring read-only
A textual representation of the serial number of the attached printer, if known.
                 prtgenStatusTable 1.3.6.1.4.1.641.2.1.3 no-access
A table of the network adapter's attached printer status.
                     prtgenStatusEntry 1.3.6.1.4.1.641.2.1.3.1 no-access
An entry containing attached printer status.
                         prtgenStatPrinterIndex 1.3.6.1.4.1.641.2.1.3.1.1 integer read-only
A unique value used by the network adapter to identify attached printers.
                         prtgenStatusIRC 1.3.6.1.4.1.641.2.1.3.1.2 integer read-only
The printer's current intervention required code.
                         prtgenStatusOutHopFull 1.3.6.1.4.1.641.2.1.3.1.3 integer read-only
The printer's current output hopper status. Enumeration: 'unknown': 3, 'full': 2, 'notFull': 1.
                         prtgenStatusInputEmpty 1.3.6.1.4.1.641.2.1.3.1.4 integer read-only
The printer's current active input paper tray status. Enumeration: 'unknown': 3, 'empty': 2, 'notEmpty': 1.
                         prtgenStatusPaperJam 1.3.6.1.4.1.641.2.1.3.1.5 integer read-only
The printer's current paper path status. Enumeration: 'unknown': 3, 'notJammed': 1, 'jamed': 2.
                         prtgenStatusTonerError 1.3.6.1.4.1.641.2.1.3.1.6 integer read-only
The printer's current toner supply status. Enumeration: 'unknown': 3, 'tonerError': 2, 'noTonerError': 1.
                         prtgenStatusSrvcReqd 1.3.6.1.4.1.641.2.1.3.1.7 integer read-only
The printer's current service required status. Enumeration: 'noServiceRequired': 1, 'unknown': 3, 'serviceRequired': 2.
                         prtgenStatusDiskError 1.3.6.1.4.1.641.2.1.3.1.8 integer read-only
The printer's current disk sub-system status. Enumeration: 'unknown': 3, 'diskError': 2, 'noDiskError': 1.
                         prtgenStatusCoverOpen 1.3.6.1.4.1.641.2.1.3.1.9 integer read-only
The printer's current cover status. Enumeration: 'noCoverOpen': 1, 'coverOpen': 2, 'unknown': 3.
                         prtgenStatusPageComplex 1.3.6.1.4.1.641.2.1.3.1.10 integer read-only
The printer's current complex page status. Enumeration: 'unknown': 3, 'complexPage': 2, 'noComplexPage': 1.
                         prtgenStatusLineStatus 1.3.6.1.4.1.641.2.1.3.1.11 integer read-only
The printer's current online/offline status. Enumeration: 'unknown': 3, 'offline': 2, 'online': 1.
                         prtgenStatusBusy 1.3.6.1.4.1.641.2.1.3.1.12 integer read-only
The printer's current bust status. Enumeration: 'busy': 2, 'notBusy': 1, 'unknown': 3.
                         prtgenStatusWaiting 1.3.6.1.4.1.641.2.1.3.1.13 integer read-only
The printer's current waiting status. Enumeration: 'unknown': 3, 'waiting': 2, 'notWaiting': 1.
                         prtgenStatusWarming 1.3.6.1.4.1.641.2.1.3.1.14 integer read-only
The printer's current warming status. Enumeration: 'unknown': 3, 'warming': 2, 'notWarming': 1.
                         prtgenStatusPrinting 1.3.6.1.4.1.641.2.1.3.1.15 integer read-only
The printer's current printing status. Enumeration: 'unknown': 3, 'printing': 2, 'notPrinting': 1.
         attachment 1.3.6.1.4.1.641.3
             fax 1.3.6.1.4.1.641.3.1
                 faxNumber 1.3.6.1.4.1.641.3.1.1 integer read-only
The number of fax modems attached to the adapter.
                 faxTable 1.3.6.1.4.1.641.3.1.2 no-access
A table of the network adapter's attached fax modems configuration data.
                     faxEntry 1.3.6.1.4.1.641.3.1.2.1 no-access
An entry containing attached fax modem configuration data.
                         faxIndex 1.3.6.1.4.1.641.3.1.2.1.1 integer read-only
A unique value used by the adapter to identify fax ports.
                         faxPort 1.3.6.1.4.1.641.3.1.2.1.2 integer read-only
The network adapter's port to which this modem is attached. Enumeration: 'serial3': 147, 'serial2': 146, 'serial1': 145, 'serial5': 149, 'serial4': 148.
                         faxAdapterCapabilities 1.3.6.1.4.1.641.3.1.2.1.3 integer read-only
A bitmap representing the fax capabilities of the network adapter. Bit Value Capabilities --- ------ -------------------- 0 1 Fine Resolution 1 2 2D Encoding 2 4 T6 Encoding 3 8 ECM 4 16 Binary File Transfer 5 32 300 x 300 6 64 400 x 400 7 128 200 x 400 8 256 Uncompressed Mode 9 512 255mm Width 10 1024 303mm Width 11 2048 Legal Length 12 4096 Unlimited Length 13 8192 V.17 (14400) 14 16384 V.33 (14400) 15 32768 V.29 and V.27 (9600) 16 65536 V.29 (9600) 17 131072 V.27 (4800) 18 262144 V27 (2400)
                         faxModemCapabilities 1.3.6.1.4.1.641.3.1.2.1.4 integer read-only
A bitmap representing the fax capabilities of the attached modem. Bit Value Capabilities --- ------ -------------------- 0 1 Fine Resolution 1 2 2D Encoding 2 4 T6 Encoding 3 8 ECM 4 16 Binary File Transfer 5 32 300 x 300 6 64 400 x 400 7 128 200 x 400 8 256 Uncompressed Mode 9 512 255mm Width 10 1024 303mm Width 11 2048 Legal Length 12 4096 Unlimited Length 13 8192 V.17 (14400) 14 16384 V.33 (14400) 15 32768 V.29 and V.27 (9600) 16 65536 V.29 (9600) 17 131072 V.27 (4800) 18 262144 V27 (2400)
                         faxSelectedCapabilities 1.3.6.1.4.1.641.3.1.2.1.5 integer read-write
A bitmap representing the user selected fax capabilities. Bit Value Capabilities --- ------ -------------------- 0 1 Fine Resolution 1 2 2D Encoding 2 4 T6 Encoding 3 8 ECM 4 16 Binary File Transfer 5 32 300 x 300 6 64 400 x 400 7 128 200 x 400 8 256 Uncompressed Mode 9 512 255mm Width 10 1024 303mm Width 11 2048 Legal Length 12 4096 Unlimited Length 13 8192 V.17 (14400) 14 16384 V.33 (14400) 15 32768 V.29 and V.27 (9600) 16 65536 V.29 (9600) 17 131072 V.27 (4800) 18 262144 V27 (2400)
                         faxActiveCapabilities 1.3.6.1.4.1.641.3.1.2.1.6 integer read-only
A bitmap representing the active fax capabilities. This is the logical and of faxAdapterCapabilities, faxModemCapabilities, and faxSelectedCapabilities. Bit Value Capabilities --- ------ -------------------- 0 1 Fine Resolution 1 2 2D Encoding 2 4 T6 Encoding 3 8 ECM 4 16 Binary File Transfer 5 32 300 x 300 6 64 400 x 400 7 128 200 x 400 8 256 Uncompressed Mode 9 512 255mm Width 10 1024 303mm Width 11 2048 Legal Length 12 4096 Unlimited Length 13 8192 V.17 (14400) 14 16384 V.33 (14400) 15 32768 V.29 and V.27 (9600) 16 65536 V.29 (9600) 17 131072 V.27 (4800) 18 262144 V27 (2400)
                         faxIDString 1.3.6.1.4.1.641.3.1.2.1.7 displaystring read-write
The textual identification that is used to identify this fax device. This text is sent to a connected fax device at the start of a call.
                         faxInitString 1.3.6.1.4.1.641.3.1.2.1.8 displaystring read-write
The commands used be the network adapter to initialize an attached modem.
                         faxNumberRings 1.3.6.1.4.1.641.3.1.2.1.9 integer read-write
The number of rings that the network adapter should wait before answering.
                         faxScaling 1.3.6.1.4.1.641.3.1.2.1.10 integer read-write
The mechanism used to resolve size descrepancies between the received fax the printer's available forms. Enumeration: 'scaleToFit': 1, 'cropToFit': 2.
                         faxBinaryEncoding 1.3.6.1.4.1.641.3.1.2.1.11 integer read-write
The encoding used when sending fax data to the attached printer. Enumeration: 'ascii85': 2, 'taggedBinary': 1.
                         faxPrinterPort 1.3.6.1.4.1.641.3.1.2.1.13 integer read-write
The port (printer) to which received faxes should be printed. Enumeration: 'parallel2': 130, 'firstAvail': 255, 'parallel1': 129.
                         faxInputTray 1.3.6.1.4.1.641.3.1.2.1.14 integer read-write
The input tray from which received faxes should be printed. The value 255 indicates printer default.
                         faxOutputBin 1.3.6.1.4.1.641.3.1.2.1.15 integer read-write
The output bin to which received faxes should be printed. The value 255 indicates printer default.
               irCleared 1.3.6.1.4.1.641.10.0
The condition on the printer has been cleared.
               irCondition 1.3.6.1.4.1.641.10.1
An error condition exists on the printer
               irOutputFull 1.3.6.1.4.1.641.10.2
The printers output bin is full.
               irLoadPaper 1.3.6.1.4.1.641.10.3
Load paper on the printer
               irPaperJam 1.3.6.1.4.1.641.10.4
Paper jam on the printer.
               irTonerLow 1.3.6.1.4.1.641.10.5
Toner low on the printer
               irServiceReq 1.3.6.1.4.1.641.10.6
Service required on the printer
               irDiskErr 1.3.6.1.4.1.641.10.7
Disk error on the printer
               irCoverOpen 1.3.6.1.4.1.641.10.8
Cover open on the printer
               irPageComplexity 1.3.6.1.4.1.641.10.9
Page complexity error on the printer
               irOffline 1.3.6.1.4.1.641.10.10
The printer is offline
               irClearedTypeII 1.3.6.1.4.1.641.10.11
The condition on the printer has been cleared.