KALEXT-MIB: View SNMP OID List / Download MIB

VENDOR: ARROWPOINT COMMUNICATIONS INC.


 Home MIB: KALEXT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, APENT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 apKalExtMib 1.3.6.1.4.1.2467.1.46.1
The MIB module used to describe the ArrowPoint Communications Keepalives
 apKalTable 1.3.6.1.4.1.2467.1.46.2 no-access
A list of Keepalives
     apKalEntry 1.3.6.1.4.1.2467.1.46.2.1 no-access
A group of information uniquely identifying a Keepalive. One entry exists for each Keepalive
         apKalName 1.3.6.1.4.1.2467.1.46.2.1.1 displaystring read-only
The name of the Keepalive
         apKalStatus 1.3.6.1.4.1.2467.1.46.2.1.2 rowstatus read-only
Status entry for this row
         apKalDescription 1.3.6.1.4.1.2467.1.46.2.1.3 displaystring read-only
The description of the Keepalive
         apKalEnable 1.3.6.1.4.1.2467.1.46.2.1.4 integer read-only
The state of the keepalive, either enable or disabled Enumeration: 'enable': 1, 'disable': 0.
         apKalIPAddress 1.3.6.1.4.1.2467.1.46.2.1.5 ipaddress read-only
The IP Address the of the content providing service.
         apKalPort 1.3.6.1.4.1.2467.1.46.2.1.6 integer32 read-only
The Keepalive IP Port to use
         apKalType 1.3.6.1.4.1.2467.1.46.2.1.7 integer read-only
The Keepalive detection method. Enumeration: 'ftp': 3, 'icmp': 1, 'http': 2, 'tcp': 4, 'script': 5.
         apKalFrequency 1.3.6.1.4.1.2467.1.46.2.1.8 integer32 read-only
The Keepalive frequency of doing keepalive probes in units of seconds.
         apKalMaxFailure 1.3.6.1.4.1.2467.1.46.2.1.9 integer32 read-only
The Keepalive maximum number of failures before the service is transitioned to failed state.
         apKalRetryPeriod 1.3.6.1.4.1.2467.1.46.2.1.10 integer32 read-only
The Keepalive frequency of probes to the service after it has been transitioned to failed state.
         apKalUri 1.3.6.1.4.1.2467.1.46.2.1.11 displaystring read-only
The URI which be checked during an HTTP keepalive.
         apKalMethod 1.3.6.1.4.1.2467.1.46.2.1.12 integer read-only
The HTTP method used for the HTTP keepalive type. The methods operate in the following manner: HEAD -- HTTP HEAD generated. 200 response code required GET -- HTTP GET generated. MD5 Hash of entify body performed. First successful GET (200 response code) becomes reference hash. Deviation from rererence hash result, or non-200 response code, results in service state transition. POST -- Same as GET with substituation of POST method. Enumeration: 'head': 1, 'post': 3, 'get': 2.
         apKalPersistence 1.3.6.1.4.1.2467.1.46.2.1.13 integer read-only
This object controls whether the Keepalive will be attempted over a persistent connection. Persistent connections are supported through HTTP 1.1, and HTTP 1.0 with Connection-KeepAlive Enumeration: 'non-persistent': 0, 'persistent': 1.
         apKalState 1.3.6.1.4.1.2467.1.46.2.1.14 integer read-only
The current keepalive state Enumeration: 'down': 2, 'alive': 4, 'suspended': 1, 'dying': 5.
         apKalHash 1.3.6.1.4.1.2467.1.46.2.1.15 displaystring read-only
This object contains the MD5 hash which will be compared for HTTP keepalives which use the GET method.
         apKalFtpRecordName 1.3.6.1.4.1.2467.1.46.2.1.16 displaystring read-only
This object contains the ftp-record used in conjunction with ftp keepalives
         apKalScriptName 1.3.6.1.4.1.2467.1.46.2.1.17 displaystring read-only
This name represents the script that will be used in conjunction with the keepalive type script. The script will be played everytime the keepalive is issued.
         apKalScriptArgs 1.3.6.1.4.1.2467.1.46.2.1.18 displaystring read-only
This name represents the script arguments that will be used in conjunction with the keepalive type script.
         apKalScriptLog 1.3.6.1.4.1.2467.1.46.2.1.19 displaystring read-only
This name represents the script log that can be used to capture output from a keepalive script.