Juniper-IPV6-PROFILE-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Juniper-IPV6-PROFILE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, Juniper-MIBs, INET-ADDRESS-MIB, Juniper-TC, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 juniIpv6ProfileMIB 1.3.6.1.4.1.4874.2.2.68
The IPv6 Profile MIB for the Juniper Networks enterprise.
       juniIpv6ProfileObjects 1.3.6.1.4.1.4874.2.2.68.1
           juniIpv6Profile 1.3.6.1.4.1.4874.2.2.68.1.1
               juniIpv6ProfileTable 1.3.6.1.4.1.4874.2.2.68.1.1.1 no-access
The entries in this table describe profiles for configuring IP interfaces. Entries in this table are created/deleted as a side-effect of corresponding operations to the juniProfileNameTable in the Juniper-PROFILE-MIB.
                   juniIpv6ProfileEntry 1.3.6.1.4.1.4874.2.2.68.1.1.1.1 no-access
A profile describing configuration of an IPv6 interface.
                       juniIpv6ProfileId 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.1 unsigned32 no-access
The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable.
                       juniIpv6ProfileSetMap 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.2 junisetmap read-write
A bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set). When a SET request does not explicitly configure JuniSetMap, bits in JuniSetMap are set as a side-effect of configuring other profile attributes in the same entry. If, however, a SET request explicitly configures JuniSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur. Once set, bits can only be cleared by explicitly configuring JuniSetMap.
                       juniIpv6ProfileRouterName 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.3 juniname read-write
The virtual router to which an IPv6 interface configured by this profile will be assigned, if other mechanisms do not otherwise specify a virtual router assignment.
                       juniIpv6ProfileIpv6Addr 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.4 inetaddressipv6 read-write
An IPv6 address to be used by an IPv6 interface configured by this profile. This object will have a value of 0::0 for an unnumbered interface.
                       juniIpv6ProfileIpv6MaskLen 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.5 integer32 read-write
An IPv6 address mask length to be used by an IPv6 interface configured by this profile. This object will have a value of 0 for an unnumbered interface.
                       juniIpv6ProfileMtu 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.6 integer32 read-write
The configured MTU size for this IPv6 network interface. If set to zero, the default MTU size, as determined by the underlying network media, is used.
                       juniIpv6ProfileSrcAddrValidEnable 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.7 junienable read-write
Enable/disable whether source addresses in received IPv6 packets are validated. Validation is performed by looking up the source IPv6 address in the routing database and determining whether the packet arrived on the expected interface; if not, the packet is discarded.
                       juniIpv6ProfileInheritNumString 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.8 displaystring read-write
The text identifier of the numbered interface, associated with the specified virtual router, whose IPv6 address is used as the source address when transmitting IPv6 packets on unnumbered remote access user links. Types/formats/examples for this string include: Loopback loopback 'loopback 0' ATM Virtual Circuit atm /. 'atm 3/1.100' Ethernet { fastEthernet | gigabitEthernet } / 'fastEthernet 3/0' 'gigabitEthernet 3/0' Ethernet VLAN { fastEthernet | gigabitEthernet } /: 'fastEthernet 3/0:1000' 'gigabitEthernet 3/0:1000' Channelized Serial serial /:[/]* 'serial 3/0:4' (T1/E1) 'serial 3/0:2/4' (T3/E3) 'serial 3/0:2/1/1/4' (OC3/OC12 - channelized DS3) 'serial 3/0:2/1/1/1/4' (OC3/OC12 - virtual tributaries) Other formats may be supported over time. An empty string indicates the referenced interface is unspecified, e.g., when this IPv6 interface is numbered.
                       juniIpv6ProfileNdEnabled 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.9 junienable read-write
Enable/disable ND for this IPv6 network interface.
                       juniIpv6ProfileNdManagedConfig 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.10 junienable read-write
Enable/disable ND managed config for this IPv6 network interface.
                       juniIpv6ProfileNdOtherConfig 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.11 junienable read-write
Enable/disable ND other config for this IPv6 network interface.
                       juniIpv6ProfileNdSuppressRa 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.12 junienable read-write
Enable/disable ND suppress RA for this IPv6 network interface.
                       juniIpv6ProfileNdRaInterval 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.13 integer32 read-write
The configured interval between IPv6 RA transmissions on the interface.
                       juniIpv6ProfileNdRaLifeTime 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.14 integer32 read-write
The configured RA lifetime for this IPv6 network interface.
                       juniIpv6ProfileNdReachableTime 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.15 integer32 read-write
The configured RA reachable time for this IPv6 network interface.
                       juniIpv6ProfileNdPrefix 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.16 ipv6addressprefix read-write
The prefix associated with the this interface.
                       juniIpv6ProfileNdPrefixLength 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.17 integer32 read-write
The length of the prefix (in bits).
                       juniIpv6ProfileNdPrefixOnLinkFlag 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.18 junienable read-write
This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
                       juniIpv6ProfileNdPrefixAutonomousFlag 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.19 junienable read-write
Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address.
                       juniIpv6ProfileNdPrefixPreferredLifetime 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.20 integer32 read-write
It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
                       juniIpv6ProfileNdPrefixValidLifetime 1.3.6.1.4.1.4874.2.2.68.1.1.1.1.21 integer32 read-write
It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
       juniIpv6ProfileMIBConformance 1.3.6.1.4.1.4874.2.2.68.4
           juniIpv6ProfileMIBCompliances 1.3.6.1.4.1.4874.2.2.68.4.1
               juniIpv6ProfileCompliance 1.3.6.1.4.1.4874.2.2.68.4.1.1
Obsolete Compliance statement for systems supporting IPv6 configuration profiles. This statement became obsolete when added ND support.
               juniIpv6ProfileCompliance1 1.3.6.1.4.1.4874.2.2.68.4.1.2
Compliance statement for systems supporting IPv6 configuration profiles, incorporating support of ND on dynamical interface.
           juniIpv6ProfileMIBGroups 1.3.6.1.4.1.4874.2.2.68.4.2
               juniIpv6ProfileGroup 1.3.6.1.4.1.4874.2.2.68.4.2.1
An obsolete collection of objects providing management of IPv6 Profile functionality in a Juniper product. This statement became obsolete when added ND support.
               juniIpv6ProfileGroup1 1.3.6.1.4.1.4874.2.2.68.4.2.2
The basic collection of objects providing management of IPv6 Profile functionality in a Juniper product.