Juniper-IP-PROFILE-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Juniper-IP-PROFILE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Juniper-MIBs, Juniper-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 juniIpProfileMIB 1.3.6.1.4.1.4874.2.2.26
The IP Profile MIB for the Juniper Networks enterprise.
       juniIpProfileObjects 1.3.6.1.4.1.4874.2.2.26.1
           juniIpProfile 1.3.6.1.4.1.4874.2.2.26.1.1
               juniIpProfileTable 1.3.6.1.4.1.4874.2.2.26.1.1.1 no-access
The entries in this table describe profiles for configuring IP interfaces. Entries in this table are created/deleted as a side-effect of corresponding operations to the juniProfileNameTable in the Juniper-PROFILE-MIB.
                   juniIpProfileEntry 1.3.6.1.4.1.4874.2.2.26.1.1.1.1 no-access
A profile describing configuration of an IP interface.
                       juniIpProfileId 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.1 unsigned32 no-access
The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable.
                       juniIpProfileRowStatus 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.2 rowstatus read-only
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. The value of juniIpProfileId must match that of a profile name configured in juniProfileNameTable.
                       juniIpProfileRouterName 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.3 juniname read-only
The virtual router to which an IP interface configured by this profile will be assigned, if other mechanisms do not otherwise specify a virtual router assignment.
                       juniIpProfileIpAddr 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.4 ipaddress read-only
An IP address to be used by an IP interface configured by this profile. This object will have a value of 0.0.0.0 for an unnumbered interface.
                       juniIpProfileIpMask 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.5 ipaddress read-only
An IP address mask to be used by an IP interface configured by this profile. This object will have a value of 0.0.0.0 for an unnumbered interface.
                       juniIpProfileDirectedBcastEnable 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.6 junienable read-only
Enable/disable forwarding of directed broadcasts on this IP network interface.
                       juniIpProfileIcmpRedirectEnable 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.7 junienable read-only
Enable/disable transmission of ICMP Redirect messages on this IP network interface.
                       juniIpProfileAccessRoute 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.8 junienable read-only
Enable/disable whether a host route is automatically created for a remote host attached to an IP interface that is configured using this profile.
                       juniIpProfileMtu 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.9 integer32 read-only
The configured MTU size for this IP network interface. If set to zero, the default MTU size, as determined by the underlying network media, is used.
                       juniIpProfileLoopbackIfIndex 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.10 interfaceindexorzero read-only
For unnumbered interfaces, the IfIndex of the IP loopback interface whose IP address is used as the source address for transmitted IP packets. A value of zero means the loopback interface is unspecified (e.g., when the interface is numbered).
                       juniIpProfileLoopback 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.11 integer32 read-only
The number of the loopback interface, associated with the specified virtual router, whose IP address is used as the source address when transmitting IP packets on unnumbered remote access user links. For example, if the loopback interface for the associated router was configured via the console as 'loopback 2', this object would contain the integer value 2. A value of -1 indicates the loopback interface is unspecified, e.g., when the IP interface is numbered. This object has been replaced by juniIpProfileInheritNumString. This object is no longer represented in the juniIpProfileSetMap.
                       juniIpProfileSetMap 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.12 junisetmap read-only
A bitmap representing which objects in this entry have been explicitly configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for details of use. The INDEX object(s) and this object are excluded from representation (i.e. their bits are never set). When a SET request does not explicitly configure JuniSetMap, bits in JuniSetMap are set as a side-effect of configuring other profile attributes in the same entry. If, however, a SET request explicitly configures JuniSetMap, the explicitly configured value overrides 1) any previous bit settings, and 2) any simultaneous 'side-effect' settings that would otherwise occur. Once set, bits can only be cleared by explicitly configuring JuniSetMap.
                       juniIpProfileSrcAddrValidEnable 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.13 junienable read-only
Enable/disable whether source addresses in received IP packets are validated. Validation is performed by looking up the source IP address in the routing database and determining whether the packet arrived on the expected interface; if not, the packet is discarded.
                       juniIpProfileInheritNumString 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.14 displaystring read-only
The text identifier of the numbered interface, associated with the specified virtual router, whose IP address is used as the source address when transmitting IP packets on unnumbered remote access user links. Types/formats/examples for this string include: Loopback loopback 'loopback 0' ATM Virtual Circuit atm /. 'atm 3/1.100' Ethernet { fastEthernet | gigabitEthernet } / 'fastEthernet 3/0' 'gigabitEthernet 3/0' Ethernet VLAN { fastEthernet | gigabitEthernet } /: 'fastEthernet 3/0:1000' 'gigabitEthernet 3/0:1000' Channelized Serial serial /:[/]* 'serial 3/0:4' (T1/E1) 'serial 3/0:2/4' (T3/E3) 'serial 3/0:2/1/1/4' (OC3/OC12 - channelized DS3) 'serial 3/0:2/1/1/1/4' (OC3/OC12 - virtual tributaries) Other formats may be supported over time. An empty string indicates the referenced interface is unspecified, e.g., when this IP interface is numbered.
                       juniIpProfileTcpMss 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.15 integer32 read-only
Configures TCP MSS value for an IP interface. When configured, MSS value of TCP SYN packets received or transmitted on the interface will be compared with the configured value and lowest of the two will replace the value in the packet.
                       juniIpProfileFilterOptionsAll 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.16 junienable read-only
Enable/disable whether IP packets containing options are to be discarded or sent to the control plane for processing.
                       juniIpProfileFlowStats 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.17 junienable read-only
Enable/disable whether J-Flow is enabled on the interface
                       juniIpProfileBlockMulticastSources 1.3.6.1.4.1.4874.2.2.26.1.1.1.1.18 junienable read-only
Enable/disable Blocking Multicast traffic
       juniIpProfileMIBConformance 1.3.6.1.4.1.4874.2.2.26.4
           juniIpProfileMIBCompliances 1.3.6.1.4.1.4874.2.2.26.4.1
               juniIpProfileCompliance 1.3.6.1.4.1.4874.2.2.26.4.1.1
Obsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when juniIpProfileLoopback replaced juniIpProfileLoopbackIfIndex.
               juniIpProfileCompliance1 1.3.6.1.4.1.4874.2.2.26.4.1.2
Obsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when juniIpProfileRowStatus was deprecate and the juniIpProfileSetMap and juniIpProfileSrcAddrValidEnable objects were added.
               juniIpProfileCompliance2 1.3.6.1.4.1.4874.2.2.26.4.1.3
Obsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when juniIpProfileLoopback was obsoleted and the juniIpProfileInheritNumString object was added.
               juniIpProfileCompliance3 1.3.6.1.4.1.4874.2.2.26.4.1.4
Obsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when juniIpProfileTcpMss was added.
               juniIpProfileCompliance4 1.3.6.1.4.1.4874.2.2.26.4.1.5
Obsolete compliance statement for systems supporting IP configuration profiles. This statement became obsolete when juniIpProfileFilterOptionsAll was added.
               juniIpProfileCompliance5 1.3.6.1.4.1.4874.2.2.26.4.1.6
The compliance statement for systems supporting IP configuration profiles, incorporating juniIpProfileFilterOptionsAll.
               juniIpProfileCompliance6 1.3.6.1.4.1.4874.2.2.26.4.1.7
The compliance statement for systems supporting IP configuration profiles, incorporating juniIpProfileFlowStats.
               juniIpProfileCompliance7 1.3.6.1.4.1.4874.2.2.26.4.1.8
The compliance statement for systems supporting IP configuration profiles, incorporating juniIpProfileBlockMulticastSources.
           juniIpProfileMIBGroups 1.3.6.1.4.1.4874.2.2.26.4.2
               juniIpProfileGroup 1.3.6.1.4.1.4874.2.2.26.4.2.1
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This group became obsolete when juniIpProfileLoopback replaced juniIpProfileLoopbackIfIndex.
               juniIpProfileGroup1 1.3.6.1.4.1.4874.2.2.26.4.2.2
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This group became obsolete when juniIpProfileRowStatus was deprecate and the juniIpProfileSetMap and juniIpProfileSrcAddrValidEnable objects were added.
               juniIpProfileGroup2 1.3.6.1.4.1.4874.2.2.26.4.2.3
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This statement became obsolete when juniIpProfileLoopback was obsoleted and the juniIpProfileInheritNumString object was added.
               juniIpProfileDeprecatedGroup 1.3.6.1.4.1.4874.2.2.26.4.2.4
Deprecated object providing management of IP Profile functionality in a Juniper product. This group has been deprecated but may still be supported on some implementations.
               juniIpProfileGroup3 1.3.6.1.4.1.4874.2.2.26.4.2.5
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This statement became obsolete when juniIpProfileTcpMss was added.
               juniIpProfileGroup4 1.3.6.1.4.1.4874.2.2.26.4.2.6
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This statement became osolete when juniIpProfileFilterOptionsAll was added.
               juniIpProfileGroup5 1.3.6.1.4.1.4874.2.2.26.4.2.7
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This statement became osolete when juniIpProfileFlowStats was added.
               juniIpProfileGroup6 1.3.6.1.4.1.4874.2.2.26.4.2.8
An obsolete collection of objects providing management of IP Profile functionality in a Juniper product. This statement became obsolete when juniIpProfileBlockMulticastSources was added.
               juniIpProfileGroup7 1.3.6.1.4.1.4874.2.2.26.4.2.9
The basic collection of objects providing management of IP Profile functionality in a Juniper product.