Juniper-BRIDGE-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Juniper-BRIDGE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Juniper-MIBs, Juniper-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 juniBridgeMIB 1.3.6.1.4.1.4874.2.2.63
The Bridge MIB for the Juniper enterprise.
       juniBridgeIfLayer 1.3.6.1.4.1.4874.2.2.63.1
           juniBridgeIfNextIfIndex 1.3.6.1.4.1.4874.2.2.63.1.1 juninextifindex read-only
Coordinate ifIndex value allocation for entries in juniBridgeIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
           juniBridgeIfTable 1.3.6.1.4.1.4874.2.2.63.1.2 no-access
This table contains entries for Bridge interfaces present in the system.
               juniBridgeIfEntry 1.3.6.1.4.1.4874.2.2.63.1.2.1 no-access
Each entry describes the characteristics of a Bridge interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/juniIfTable.
                   juniBridgeIfIndex 1.3.6.1.4.1.4874.2.2.63.1.2.1.1 interfaceindex no-access
The ifIndex of the Bridge interface. When creating entries in this table, suitable values for this object are determined by reading juniBridgeIfNextIfIndex.
                   juniBridgeIfRowStatus 1.3.6.1.4.1.4874.2.2.63.1.2.1.2 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniBridgeIfRowStatus juniBridgeIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniBridgeIfIndex must have been determined previously, by reading juniBridgeIfNextIfIndex. A corresponding entry in ifTable/ifXTable/juniIfTable is created/destroyed as a result of creating/destroying an entry in this table.
                   juniBridgeIfLowerIfIndex 1.3.6.1.4.1.4874.2.2.63.1.2.1.3 interfaceindexorzero read-only
The ifIndex of an interface over which this Bridge interface to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                   juniBridgeSPolicyIndex 1.3.6.1.4.1.4874.2.2.63.1.2.1.4 unsigned32 read-only
The index of the associated subscriber policy.
                   juniBridgeIfMaxLearnCount 1.3.6.1.4.1.4874.2.2.63.1.2.1.5 unsigned32 read-only
The maximum number of entries that can be learned on this interface.
       juniBridgeAgeLayer 1.3.6.1.4.1.4874.2.2.63.2
           juniBridgeAgeTable 1.3.6.1.4.1.4874.2.2.63.2.1 no-access
A table that contains information about unicast entries for which the bridge has aging information.
               juniBridgeAgeEntry 1.3.6.1.4.1.4874.2.2.63.2.1.1 no-access
Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
                   juniBridgeMacAddress 1.3.6.1.4.1.4874.2.2.63.2.1.1.1 macaddress no-access
A unicast MAC address for which the bridge has aging information.
                   juniBridgeAge 1.3.6.1.4.1.4874.2.2.63.2.1.1.2 unsigned32 read-only
The age of this entry in the forwarding table.
       juniBridgeMiscCounters 1.3.6.1.4.1.4874.2.2.63.3
           juniBridgeDupMacCounter 1.3.6.1.4.1.4874.2.2.63.3.1 counter32 read-only
The total number of duplicate mac entries found for this bridge group. A duplicate mac address is considered duplicate if found on more than one interface(port).
       juniBridgeConformance 1.3.6.1.4.1.4874.2.2.63.4
           juniBridgeCompliances 1.3.6.1.4.1.4874.2.2.63.4.1
               juniBridgeCompliance 1.3.6.1.4.1.4874.2.2.63.4.1.1
The compliance statement for entities which implement the Juniper Bridge MIB.
           juniBridgeGroups 1.3.6.1.4.1.4874.2.2.63.4.2
               juniBridgeGroup 1.3.6.1.4.1.4874.2.2.63.4.2.1
A collection of objects providing management of bridges in a Juniper product.