JUNIPER-WX-EVENT-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: JUNIPER-WX-EVENT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, JUNIPER-WX-GLOBAL-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 jnxWxGrpEventV2 1.3.6.1.4.1.2636.3.41.1.1.3.0
Branch for SNMPv2 events. The OIDs for SNMPv2 events should have a zero as the next-to-last sub-identifier (as specified in RFC1902).
     jnxWxGrpEventPowerSupplyFailure 1.3.6.1.4.1.2636.3.41.1.1.3.0.1
One or more sources of power to the system have failed. A redundant power-supply has presumably taken over.
     jnxWxGrpEventPowerSupplyOk 1.3.6.1.4.1.2636.3.41.1.1.3.0.2
One or more previously failed sources of power is now working normally. The transition to normal condition happened without the system having to be restarted.
     jnxWxGrpEventLicenseWillExpire 1.3.6.1.4.1.2636.3.41.1.1.3.0.3
The license for the system is about to expire shortly. When it eventually does expire, the system will switch over to and stay in pass-through mode.
     jnxWxGrpEventThruputLimitExceeded 1.3.6.1.4.1.2636.3.41.1.1.3.0.4
The throughput of traffic through the device has exceeded the limit for which it has been licensed.
     jnxWxGrpEventLicenseExpired 1.3.6.1.4.1.2636.3.41.1.1.3.0.5
The license for the system expired. As a result, the system will switch over to and stay in pass-through mode.
     jnxWxGrpEventClientLimitExceeded 1.3.6.1.4.1.2636.3.41.1.1.3.0.6
Exceeded licensed maximum concurrent client connections. Please contact Juniper Networks to obtain a new license with higher number of concurrent client connections.
     jnxWxGrpEventInFailSafeMode 1.3.6.1.4.1.2636.3.41.1.1.3.0.7
This trap is sent when the device boots up in fail-safe mode. This can happen for one of the following reasons: Fail-safe reboot was explicitly initiated by the user. The device rebooted automatically too many times because of the failure of internal consistency checks or the failure of tests that verify proper operation of the device.
     jnxWxGrpEventInterfaceSpeedMismatch 1.3.6.1.4.1.2636.3.41.1.1.3.0.8
A mismatch is detected between the local and remote interface settings. This can happen due to a mismatch in the local and remote interface speed or mode.
     jnxWxGrpEventInterfaceSpeedOk 1.3.6.1.4.1.2636.3.41.1.1.3.0.9
A mismatch previously detected between the local and remote interface settings is now resolved. The local and remote interface speed and mode are matched.
     jnxWxGrpEventInterfaceDuplexMismatch 1.3.6.1.4.1.2636.3.41.1.1.3.0.10
A possible mismatch was detected between the duplex settings of either the local or remote interface and that of the device attached to that interface. The interface (local or remote) is identified by the 'ifIndex' object. Note that this notification is quite different from jnxWxGrpEventInterfaceSpeedMismatch, which compares the local and remote interfaces on the same WX device.
     jnxWxGrpEventLoginFailure 1.3.6.1.4.1.2636.3.41.1.1.3.0.11
A user's login attempt via the console/ssh/web server failed due to incorrect username or password.
     jnxWxGrpEventDiskFailure 1.3.6.1.4.1.2636.3.41.1.1.3.0.12
A hard disk failed on the system. The system was rebooted, and will now operate without the downed disk, at a degraded performance. Dictionary accumulated until this point was lost.
 jnxWxGrpEventDescr 1.3.6.1.4.1.2636.3.41.1.1.3.1 displaystring no-access
String that provides a textual description of the event.