JUNIPER-VPN-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: JUNIPER-VPN-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, JUNIPER-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 jnxVpnMIB 1.3.6.1.4.1.2636.3.26
Extended VPN MIB module to support VPN Identifier for locally switched L2 circuits.
       jnxVpnMIBNotifications 1.3.6.1.4.1.2636.3.26.0
           jnxVpnIfUp 1.3.6.1.4.1.2636.3.26.0.1
A jnxVpnIfUp notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions out of the 'down' state.
           jnxVpnIfDown 1.3.6.1.4.1.2636.3.26.0.2
A jnxVpnIfDown notification is generated when the interface with index jnxVpnIfIndex belonging to the VPN named jnxVpnIfVpnName of type jnxVpnIfVpnType transitions to the 'down' state.
           jnxVpnPwUp 1.3.6.1.4.1.2636.3.26.0.3
A jnxVpnPwUp notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName of type jnxVpnPwVpnType transitions out of the 'down' state.
           jnxVpnPwDown 1.3.6.1.4.1.2636.3.26.0.4
A jnxVpnPwDown notification is generated when the Pseudo-Wire with index jnxVpnPwIndex belonging to the VPN named jnxVpnPwVpnName of type jnxVpnPwVpnType transitions to the 'down' state.
       jnxVpnMibObjects 1.3.6.1.4.1.2636.3.26.1
           jnxVpnInfo 1.3.6.1.4.1.2636.3.26.1.1
               jnxVpnConfiguredVpns 1.3.6.1.4.1.2636.3.26.1.1.1 gauge32 read-only
Number of configured VPNs.
               jnxVpnActiveVpns 1.3.6.1.4.1.2636.3.26.1.1.2 gauge32 read-only
Number of active VPNs.
               jnxVpnNextIfIndex 1.3.6.1.4.1.2636.3.26.1.1.3 unsigned32 read-only
Next free VPN interface index.
               jnxVpnNextPwIndex 1.3.6.1.4.1.2636.3.26.1.1.4 unsigned32 read-only
Next free Pseudo-Wire index.
               jnxVpnNextRTIndex 1.3.6.1.4.1.2636.3.26.1.1.5 unsigned32 read-only
Next free Route Target index.
           jnxVpnTable 1.3.6.1.4.1.2636.3.26.1.2 no-access
Table of Configured VPNs.
               jnxVpnEntry 1.3.6.1.4.1.2636.3.26.1.2.1 no-access
Entry containing information about a particular VPN.
                   jnxVpnType 1.3.6.1.4.1.2636.3.26.1.2.1.1 jnxvpntype no-access
Type of the VPN.
                   jnxVpnName 1.3.6.1.4.1.2636.3.26.1.2.1.2 jnxvpnname no-access
Name of the VPN. This should ideally be unique in the Service Provider's domain; at a minimum, it MUST be unique per Provider Edge router.
                   jnxVpnRowStatus 1.3.6.1.4.1.2636.3.26.1.2.1.3 rowstatus read-only
This variable is used to create, modify, and/or delete a row in this table.
                   jnxVpnStorageType 1.3.6.1.4.1.2636.3.26.1.2.1.4 storagetype read-only
This variable indicates the storage type for this object.
                   jnxVpnDescription 1.3.6.1.4.1.2636.3.26.1.2.1.5 snmpadminstring read-only
String describing the VPN.
                   jnxVpnIdentifierType 1.3.6.1.4.1.2636.3.26.1.2.1.6 jnxvpnidentifiertype read-only
Type of the following JnxVpnIdentifier.
                   jnxVpnIdentifier 1.3.6.1.4.1.2636.3.26.1.2.1.7 jnxvpnidentifier read-only
In the case of BGP VPNs, this is the Route Distinguisher for the VPN. In the case of LDP VPNs, this is the VC ID for the circuit. A value of all zeros indicates that the neither a Route Distinguisher nor a VC ID is configured for the VPN.
                   jnxVpnConfiguredSites 1.3.6.1.4.1.2636.3.26.1.2.1.8 gauge32 read-only
The number of sites configured in the VPN. Must be set to zero if not applicable.
                   jnxVpnActiveSites 1.3.6.1.4.1.2636.3.26.1.2.1.9 gauge32 read-only
The number of active sites (i.e., sites whose state is active) in the VPN.
                   jnxVpnLocalAddresses 1.3.6.1.4.1.2636.3.26.1.2.1.10 gauge32 read-only
The number of addresses learned from the CE device.
                   jnxVpnTotalAddresses 1.3.6.1.4.1.2636.3.26.1.2.1.11 gauge32 read-only
The total number of addresses in the VPN RIB.
                   jnxVpnAge 1.3.6.1.4.1.2636.3.26.1.2.1.12 timeticks read-only
The age (i.e., time from creation till now) of this VPN in hundredths of a second.
           jnxVpnIfTable 1.3.6.1.4.1.2636.3.26.1.3 no-access
Table of VPN Interfaces.
               jnxVpnIfEntry 1.3.6.1.4.1.2636.3.26.1.3.1 no-access
Entry containing information about a particular VPN interface.
                   jnxVpnIfVpnType 1.3.6.1.4.1.2636.3.26.1.3.1.1 jnxvpntype no-access
Type of the VPN to which this interface belongs.
                   jnxVpnIfVpnName 1.3.6.1.4.1.2636.3.26.1.3.1.2 jnxvpnname no-access
Name of the VPN to which this interface belongs.
                   jnxVpnIfIndex 1.3.6.1.4.1.2636.3.26.1.3.1.3 unsigned32 no-access
The index of this interface in the VPN. Each interface in the VPN is given a unique index. The RowStatus says whether a given interface (i.e., a row in this table) is valid or not. Note: this index MUST NOT be zero.
                   jnxVpnIfRowStatus 1.3.6.1.4.1.2636.3.26.1.3.1.4 rowstatus read-only
This variable is used to create, modify, and/or delete a row in this table.
                   jnxVpnIfStorageType 1.3.6.1.4.1.2636.3.26.1.3.1.5 storagetype read-only
This variable indicates the storage type for this object.
                   jnxVpnIfAssociatedPw 1.3.6.1.4.1.2636.3.26.1.3.1.6 unsigned32 read-only
Index of associated Pseudo-wire, if any, in which case the index MUST be non-zero. If none, then this index MUST be zero.
                   jnxVpnIfProtocol 1.3.6.1.4.1.2636.3.26.1.3.1.7 integer read-only
Protocol running over this VPN interface. The values up to 10 are taken from draft-martini-l2circuit-trans-mpls-08.txt; the value for vpls is taken from draft-lasserre-vkompella-ppvpn-vpls-01.txt. The values from 20-23 are used when the VPN is a Layer 3 VPN. Enumeration: 'cesop': 26, 'rip': 21, 'ppp': 7, 'static': 20, 'frameRelayPort': 15, 'ethernet': 5, 'atmAal5': 2, 'atmTrunkUNI': 130, 'other': 0, 'snapInterworking': 13, 'ciscoHdlc': 6, 'satope1': 17, 'satope3': 24, 'cem': 8, 'atmVpc': 10, 'satopt3': 25, 'satopt1': 18, 'vpls': 11, 'atmTrunkNNI': 129, 'atmCell': 3, 'atmVcc': 9, 'ipInterworking': 12, 'bgp': 23, 'frameRelay': 1, 'ethernetVlan': 4, 'ospf': 22.
                   jnxVpnIfInBandwidth 1.3.6.1.4.1.2636.3.26.1.3.1.8 unsigned32 read-only
Maximum bandwidth that the CE connected over this VPN i/f can send to the PE, in Kilo (i.e., 1000) Bytes per second. A value of zero means there is no configured maximum.
                   jnxVpnIfOutBandwidth 1.3.6.1.4.1.2636.3.26.1.3.1.9 unsigned32 read-only
Maximum bandwidth that the PE can send to the CE over this VPN interface, in Kilo (i.e., 1000) Bytes per second. A value of zero means there is no configured maximum.
                   jnxVpnIfStatus 1.3.6.1.4.1.2636.3.26.1.3.1.10 integer read-only
Status of this interface. Enumeration: 'down': 4, 'encapsulationMismatch': 3, 'unknown': 0, 'up': 5, 'disabled': 2, 'noLocalInterface': 1.
           jnxVpnPwTable 1.3.6.1.4.1.2636.3.26.1.4 no-access
Table of Pseudo-Wire Connections.
               jnxVpnPwEntry 1.3.6.1.4.1.2636.3.26.1.4.1 no-access
Entry containing information about a particular VPN.
                   jnxVpnPwVpnType 1.3.6.1.4.1.2636.3.26.1.4.1.1 jnxvpntype no-access
The type of the VPN to which this Pseudo-Wire belongs.
                   jnxVpnPwVpnName 1.3.6.1.4.1.2636.3.26.1.4.1.2 jnxvpnname no-access
The name of the VPN to which this Pseudo-Wire belongs.
                   jnxVpnPwIndex 1.3.6.1.4.1.2636.3.26.1.4.1.3 unsigned32 no-access
The index of this Pseudo-Wire in the VPN. Each Pseudo Wire in the VPN is given a unique index. The RowStatus says whether a given Pseudo Wire (i.e., a row in this table) is valid or not. Note: this index MUST NOT be zero.
                   jnxVpnPwRowStatus 1.3.6.1.4.1.2636.3.26.1.4.1.4 rowstatus read-only
This variable is used to create, modify, and/or delete a row in this table.
                   jnxVpnPwStorageType 1.3.6.1.4.1.2636.3.26.1.4.1.5 storagetype read-only
This variable indicates the storage type for this object.
                   jnxVpnPwAssociatedInterface 1.3.6.1.4.1.2636.3.26.1.4.1.6 unsigned32 read-only
The VPN index of the interface associated with this Pseudo Wire, if any. If there is no interface associated with this Pseudo Wire, a value of zero is to be returned.
                   jnxVpnPwLocalSiteId 1.3.6.1.4.1.2636.3.26.1.4.1.7 unsigned32 read-only
The local site identifier for this Pseudo-Wire. If there is no local site identifier, a value of zero is to be returned.
                   jnxVpnPwRemoteSiteId 1.3.6.1.4.1.2636.3.26.1.4.1.8 unsigned32 read-only
The remote site (i.e., the site at the other end of this Pseudo-Wire) identifier. If there is no remote site identifier, a value of zero is to be returned.
                   jnxVpnRemotePeIdAddrType 1.3.6.1.4.1.2636.3.26.1.4.1.9 inetaddresstype read-only
The type of address assigned to the remote PE.
                   jnxVpnRemotePeIdAddress 1.3.6.1.4.1.2636.3.26.1.4.1.10 inetaddress read-only
The address of the remote PE, i.e., the router at the other end of the Pseudo-Wire.
                   jnxVpnPwTunnelType 1.3.6.1.4.1.2636.3.26.1.4.1.11 integer read-only
The type of the tunnel over which the Pseudo-Wire is carried. If several Pseudo-Wires can be carried in one tunnel, each Pseudo-Wire is identified by the multiplexor/ demultiplexor within this tunnel. Enumeration: 'crLdp': 7, 'rsvpTe': 6, 'ldp': 5, 'static': 1, 'l2tpv3': 3, 'gre': 2, 'ipSec': 4.
                   jnxVpnPwTunnelName 1.3.6.1.4.1.2636.3.26.1.4.1.12 snmpadminstring read-only
The name of the Tunnel over which this Pseudo-Wire is carried, if any.
                   jnxVpnPwReceiveDemux 1.3.6.1.4.1.2636.3.26.1.4.1.13 jnxvpnmultiplexor read-only
The value of the demultiplexor that identifies received packets as belonging to this Pseudo-Wire, if any.
                   jnxVpnPwTransmitDemux 1.3.6.1.4.1.2636.3.26.1.4.1.14 jnxvpnmultiplexor read-only
The value of the demultiplexor that identifies transmitted packets as belonging to this Pseudo-Wire, if any.
                   jnxVpnPwStatus 1.3.6.1.4.1.2636.3.26.1.4.1.15 integer read-only
Status of the Pseudo-Wire. Enumeration: 'down': 1, 'unknown': 0, 'up': 2.
                   jnxVpnPwTunnelStatus 1.3.6.1.4.1.2636.3.26.1.4.1.16 integer read-only
Status of the PE-to-PE tunnel over which the Pseudo- Wire is carried. Enumeration: 'down': 1, 'unknown': 0, 'testing': 2, 'up': 3.
                   jnxVpnPwRemoteSiteStatus 1.3.6.1.4.1.2636.3.26.1.4.1.17 integer read-only
Status of the interface at the remote end of the Pseudo-Wire. Enumeration: 'down': 2, 'unknown': 0, 'outOfRange': 1, 'up': 3.
                   jnxVpnPwTimeUp 1.3.6.1.4.1.2636.3.26.1.4.1.18 timeticks read-only
The total time in hundredths of a second that this Pseudo-Wire has been operational.
                   jnxVpnPwTransitions 1.3.6.1.4.1.2636.3.26.1.4.1.19 gauge32 read-only
The number of state transitions (up -> down and down -> up) this Tunnel has undergone.
                   jnxVpnPwLastTransition 1.3.6.1.4.1.2636.3.26.1.4.1.20 timeticks read-only
The time in hundredths of a second since the last transition occurred on this Tunnel.
                   jnxVpnPwPacketsSent 1.3.6.1.4.1.2636.3.26.1.4.1.21 counter64 read-only
The number of packets that have been sent over this Pseudo-Wire.
                   jnxVpnPwOctetsSent 1.3.6.1.4.1.2636.3.26.1.4.1.22 counter64 read-only
The number of octets that have been sent over this Pseudo-Wire.
                   jnxVpnPwPacketsReceived 1.3.6.1.4.1.2636.3.26.1.4.1.23 counter64 read-only
The number of packets that have been received over this Pseudo-Wire.
                   jnxVpnPwOctetsReceived 1.3.6.1.4.1.2636.3.26.1.4.1.24 counter64 read-only
The number of octets that have been received over this Pseudo-Wire.
                   jnxVpnPwLRPacketsSent 1.3.6.1.4.1.2636.3.26.1.4.1.25 counter32 read-only
The number of packets that have been sent over this Pseudo-Wire.
                   jnxVpnPwLROctetsSent 1.3.6.1.4.1.2636.3.26.1.4.1.26 counter32 read-only
The number of octets that have been sent over this Pseudo-Wire.
                   jnxVpnPwLRPacketsReceived 1.3.6.1.4.1.2636.3.26.1.4.1.27 counter32 read-only
The number of packets that have been received over this Pseudo-Wire.
                   jnxVpnPwLROctetsReceived 1.3.6.1.4.1.2636.3.26.1.4.1.28 counter32 read-only
The number of octets that have been received over this Pseudo-Wire.
           jnxVpnRTTable 1.3.6.1.4.1.2636.3.26.1.5 no-access
Table of Route Targets for a VPN.
               jnxVpnRTEntry 1.3.6.1.4.1.2636.3.26.1.5.1 no-access
Entry containing information about a particular VPN.
                   jnxVpnRTVpnType 1.3.6.1.4.1.2636.3.26.1.5.1.1 jnxvpntype no-access
The type of the VPN for which this list of Route Targets are defined.
                   jnxVpnRTVpnName 1.3.6.1.4.1.2636.3.26.1.5.1.2 jnxvpnname no-access
The name of the VPN for which this list of Route Targets are defined.
                   jnxVpnRTIndex 1.3.6.1.4.1.2636.3.26.1.5.1.3 unsigned32 no-access
The index within the list of Route Targets that specifies individual Route Targets that define the VPN. Note: this index MUST NOT be zero.
                   jnxVpnRTRowStatus 1.3.6.1.4.1.2636.3.26.1.5.1.4 rowstatus read-only
This variable is used to create, modify, and/or delete a row in this table.
                   jnxVpnRTStorageType 1.3.6.1.4.1.2636.3.26.1.5.1.5 storagetype read-only
This variable indicates the storage type for this object.
                   jnxVpnRTType 1.3.6.1.4.1.2636.3.26.1.5.1.6 jnxvpnidentifiertype read-only
Type of the following Route Target. This can one of 'routeTarget[012]' or 'none'.
                   jnxVpnRT 1.3.6.1.4.1.2636.3.26.1.5.1.7 jnxvpnidentifier read-only
Route Target for the VPN. If the jnxVpnRTType is 'none', this value should be all zeros.
                   jnxVpnRTFunction 1.3.6.1.4.1.2636.3.26.1.5.1.8 integer read-only
The route target export distribution type. Enumeration: 'import': 1, 'export': 2, 'both': 3.
       jnxVpnMIBConformance 1.3.6.1.4.1.2636.3.26.2