JUNIPER-L2CP-FEATURES-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: JUNIPER-L2CP-FEATURES-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, JUNIPER-SMI, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 jnxL2cpFeaturesMIB 1.3.6.1.4.1.2636.3.53.1
This mib module is for Juniper Networks Proprietory Layer 2 control protocol (L2CP) features
     jnxL2cpObjects 1.3.6.1.4.1.2636.3.53.1.1
         jnxL2cpStpProtectObjects 1.3.6.1.4.1.2636.3.53.1.1.1
             jnxDot1dStpPortProtectTable 1.3.6.1.4.1.2636.3.53.1.1.1.1 no-access
Defines the jnxDot1dStp Port Table for providing enterprise specific extensions for Root Protect and Loop Protect to the corresponding dot1dStpPortTable entry.
                 jnxDot1dStpPortProtectEntry 1.3.6.1.4.1.2636.3.53.1.1.1.1.1 no-access
Defines an entry in the jnxDot1dStpPortProtectTable. This essentially augments the dot1dStpPortTable with additional objects.
                     jnxDot1dStpPortRootProtectEnabled 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.1 truthvalue read-only
A Boolean value set by management indicating whether Root protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Root Port, even it has the best spanning tree priority vector. This parameter should be FALSE by default.
                     jnxDot1dStpPortRootProtectState 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.2 integer read-only
Indicates whether the port was prevented from being a root port. This parameter will always return 'no-error (0)' if jnxDot1dStpPortRootProtectEnabled is FALSE. Enumeration: 'no-error': 0, 'root-prevented': 1.
                     jnxDot1dStpPortLoopProtectEnabled 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.3 truthvalue read-only
A Boolean value set by management indicating whether Loop protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Designated Port when the received superior BPDU is aged out. This parameter should be FALSE by default.
                     jnxDot1dStpPortLoopProtectState 1.3.6.1.4.1.2636.3.53.1.1.1.1.1.4 integer read-only
Indicates whether a potential Loop was prevented on the port This parameter will always return 'no-error (0)' if jnxDot1dStpPortLoopProtectEnabled is FALSE. Enumeration: 'no-error': 0, 'loop-prevented': 1.
         jnxL2cpBpduProtectObjects 1.3.6.1.4.1.2636.3.53.1.1.2
             jnxL2cpBpduProtectPortTable 1.3.6.1.4.1.2636.3.53.1.1.2.1 no-access
Defines a Port Table for BPDU Protect information. This contains only those ports on which BPDU Protect can be configured.
                 jnxL2cpBpduProtectPortEntry 1.3.6.1.4.1.2636.3.53.1.1.2.1.1 no-access
Defines an entry in the jnxL2cpBpduProtectPortTable. A list containing BPDU Protect information for each Port.
                     jnxL2cpBpduProtectPortEnabled 1.3.6.1.4.1.2636.3.53.1.1.2.1.1.1 truthvalue read-only
A Boolean value set by management indicating whether BPDU protect functionality is enabled on the port. If TRUE causes the Port to be disabled (link down) upon receipt of a BPDU. This parameter should be FALSE by default.
                     jnxL2cpPortBpduError 1.3.6.1.4.1.2636.3.53.1.1.2.1.1.2 integer read-only
Indicates whether a BPDU was received on the port. This parameter will always return 'no-error (0)' if jnxL2cpBpduProtectPortEnabled is FALSE. Enumeration: 'no-error': 0, 'detected': 1.
             jnxL2cpBpduProtectDisableTimeout 1.3.6.1.4.1.2636.3.53.1.1.2.2 integer read-only
Returns the value of time (in seconds) after which a port on which BPDU error was detected will be re-enabled. A returned value of 0 indicates that port will not be re-enabled automatically.
         jnxLacpNotifyVars 1.3.6.1.4.1.2636.3.53.1.1.3
             jnxLacpInterfaceName 1.3.6.1.4.1.2636.3.53.1.1.3.1 displaystring no-access
Lacp member interface.
             jnxLacpifIndex 1.3.6.1.4.1.2636.3.53.1.1.3.2 interfaceindex no-access
Snmp ifIndex of member interface.
             jnxLacpAggregateInterfaceName 1.3.6.1.4.1.2636.3.53.1.1.3.3 displaystring no-access
Lacp Aggregate interface.
             jnxLacpAggregateifIndex 1.3.6.1.4.1.2636.3.53.1.1.3.4 interfaceindex no-access
Snmp ifIndex of Aggregator.
             jnxLacpAggPortActorOperState 1.3.6.1.4.1.2636.3.53.1.1.3.5 displaystring no-access
Port actor operational state.
         jnxLacpAggTimeout 1.3.6.1.4.1.2636.3.53.1.1.4
             dot3adAggPortTimeoutTable 1.3.6.1.4.1.2636.3.53.1.1.4.1 no-access
A table that contains Link Aggregation Timeout information about a port that is associated with this device. A row appears in this table for each physical port.
                 dot3adAggPortTimeoutEntry 1.3.6.1.4.1.2636.3.53.1.1.4.1.1 no-access
A list of Link Aggregation Control Protocol timeout information for a port on this device.
                     dot3adInterfaceName 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.1 displaystring read-only
Physical port that is associated with Aggregation Port. This value is read-only.
                     dot3adOperState 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.2 lacpstate read-only
A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-only.
                     dot3adAggname 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.3 displaystring read-only
Aggregation Port where Physical port is associated with. This value is read-only.
                     dot3adInterfaceTimeout 1.3.6.1.4.1.2636.3.53.1.1.4.1.1.4 timeticks read-only
This object represents the time elapsed in seconds since lacp experienced timeout. This value is read-only.
     jnxL2cpNotifications 1.3.6.1.4.1.2636.3.53.1.2
         jnxL2cpProtectTraps 1.3.6.1.4.1.2636.3.53.1.2.0
             jnxPortRootProtectStateChangeTrap 1.3.6.1.4.1.2636.3.53.1.2.0.1
Generated when the ports Root-protect state (no-error or root-prevented) changes.
             jnxPortLoopProtectStateChangeTrap 1.3.6.1.4.1.2636.3.53.1.2.0.2
Generated when the ports Loop-protect state (no-error or loop-prevented) changes.
             jnxPortBpduErrorStatusChangeTrap 1.3.6.1.4.1.2636.3.53.1.2.0.3
Generated when the ports BPDU error state (no-error or detected) changes.
         jnxLacpNotificationsPrefix 1.3.6.1.4.1.2636.3.53.1.2.1
             jnxLacpTimeOut 1.3.6.1.4.1.2636.3.53.1.2.1.1
Lacp times out