JUNIPER-IFOTN-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: JUNIPER-IFOTN-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, JNX-OPT-IF-EXT-MIB, JUNIPER-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 jnxIfOtnMib 1.3.6.1.4.1.2636.3.70.1
Deprecated OCh2 tables and entries
     jnxIfOtn 1.3.6.1.4.1.2636.3.70.1.1
         jnxIfOtnOChCfgTable 1.3.6.1.4.1.2636.3.70.1.1.1 no-access
Information about the Otn OCh Config Table.
             jnxIfOtnOChCfgEntry 1.3.6.1.4.1.2636.3.70.1.1.1.1 no-access
A conceptual row that contains of the Otn OCh Config Table.
                 jnxIfOtnOChCfgContainerIndex 1.3.6.1.4.1.2636.3.70.1.1.1.1.1 integer32 no-access
The associated jnxContentsContainerIndex - eg shelf..
                 jnxIfOtnOChCfgL1Index 1.3.6.1.4.1.2636.3.70.1.1.1.1.2 integer32 no-access
The level one index associated with this subject ... eg fpc slot.
                 jnxIfOtnOChCfgL2Index 1.3.6.1.4.1.2636.3.70.1.1.1.1.3 integer32 no-access
The level two index associated with this subject .. eg pic slot.
                 jnxIfOtnOChCfgL3Index 1.3.6.1.4.1.2636.3.70.1.1.1.1.4 integer32 no-access
The level three index associated with this subject.. eg port.
                 jnxIfOtnLocalLoopback 1.3.6.1.4.1.2636.3.70.1.1.1.1.5 truthvalue read-write
This is the local loopback at the Line (after the optics).
                 jnxIfOtnLineLoopback 1.3.6.1.4.1.2636.3.70.1.1.1.1.6 truthvalue read-write
This is the line loopback at the Line.
                 jnxIfOtnPayloadLoopback 1.3.6.1.4.1.2636.3.70.1.1.1.1.7 truthvalue read-write
This is the Payload loopback before the optics.
                 jnxIfOtnAdminState 1.3.6.1.4.1.2636.3.70.1.1.1.1.8 jnxifadminstates read-write
The Admin state of this interface
                 jnxIfOtnOperState 1.3.6.1.4.1.2636.3.70.1.1.1.1.9 jnxifoperstates read-only
The operational state of this interface
                 jnxIfOtnIndex 1.3.6.1.4.1.2636.3.70.1.1.1.1.10 unsigned32 read-only
The interface ifIndex of this interface
                 jnxIfOtnOChStatus 1.3.6.1.4.1.2636.3.70.1.1.1.1.11 bits read-only
The interface status at the OCh layer. Bits: 'los': 0, 'wavelengthlockerr': 3, 'lof': 1, 'lom': 2.
                 jnxIfOtnOChPortMode 1.3.6.1.4.1.2636.3.70.1.1.1.1.12 unsigned32 read-only
The Port Mode for this interface 0 - default (not applicable) 1 - lan 2 - wan 3 - gfp
         jnxIfOtnOTUkCfgTable 1.3.6.1.4.1.2636.3.70.1.1.2 no-access
Information about the Otn OTUk config table.
             jnxIfOtnOTUkCfgEntry 1.3.6.1.4.1.2636.3.70.1.1.2.1 no-access
A conceptual row that contains the Otn OTUk config table.
                 jnxIfOtnOTUkCfgContainerIndex 1.3.6.1.4.1.2636.3.70.1.1.2.1.1 integer32 no-access
The associated jnxContentsContainerIndex - eg shelf.
                 jnxIfOtnOTUkCfgL1Index 1.3.6.1.4.1.2636.3.70.1.1.2.1.2 integer32 no-access
The level one index associated with this subject ... eg fpc slot.
                 jnxIfOtnOTUkCfgL2Index 1.3.6.1.4.1.2636.3.70.1.1.2.1.3 integer32 no-access
The level two index associated with this subject .. eg pic slot.
                 jnxIfOtnOTUkCfgL3Index 1.3.6.1.4.1.2636.3.70.1.1.2.1.4 integer32 no-access
The level three index associated with this subject.. eg port.
                 jnxIfOtnOTUkCfgRate 1.3.6.1.4.1.2636.3.70.1.1.2.1.5 jnxifotnrate read-write
This is the rate for the interface and the rates depend on the interface/fru type.
                 jnxIfOtnOTUkCfgFecMode 1.3.6.1.4.1.2636.3.70.1.1.2.1.6 jnxifotnfectype read-write
This is the Fec type in the OTU frame and the selection depends on the interface/fru type.
                 jnxIfOtnOTUkEnableAutoFrrByteInsert 1.3.6.1.4.1.2636.3.70.1.1.2.1.7 truthvalue read-write
This will enable/disable the automatic insertion of the frr SF/SD byte in the overhead bytes(RES)
                 jnxIfOtnOTUkEnableBERFrrSupport 1.3.6.1.4.1.2636.3.70.1.1.2.1.8 truthvalue read-write
This will enable/disable the FRR support for BER
                 jnxIfOtnOTUkPreFecBERThresholdMantissa 1.3.6.1.4.1.2636.3.70.1.1.2.1.9 integer32 read-write
This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade.
                 jnxIfOtnOTUkPreFecBERThresholdExponent 1.3.6.1.4.1.2636.3.70.1.1.2.1.10 integer32 read-write
This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade.
                 jnxIfOtnOTUkPreFecBERThresholdTime 1.3.6.1.4.1.2636.3.70.1.1.2.1.11 integer32 read-write
The collection times (1ms - 1sec) to calculate the BER.
                 jnxIfOtnOTUkTIMActEnabled 1.3.6.1.4.1.2636.3.70.1.1.2.1.12 truthvalue read-write
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2).
                 jnxIfOtnOTUkTxTTI 1.3.6.1.4.1.2636.3.70.1.1.2.1.13 octet string read-write
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined
                 jnxIfOtnOTUkRxTTI 1.3.6.1.4.1.2636.3.70.1.1.2.1.14 octet string read-only
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined
                 jnxIfOtnOTUkExpectedRxSapi 1.3.6.1.4.1.2636.3.70.1.1.2.1.15 octet string read-write
Expected receive SAPI.
                 jnxIfOtnOTUkExpectedRxDapi 1.3.6.1.4.1.2636.3.70.1.1.2.1.16 octet string read-write
Expected receive DAPI.
                 jnxIfOtnOTUkStatus 1.3.6.1.4.1.2636.3.70.1.1.2.1.17 bits read-only
The interface status at the OTUk layer. Bits: 'biae': 6, 'fecdegrade': 10, 'iae': 2, 'bdi': 1, 'ais': 0, 'tsf': 7, 'fecexcessive': 9, 'ttim': 3, 'ssf': 8, 'sf': 4, 'sd': 5.
                 jnxIfOtnOTUkPreFecBERThresholdClearMantissa 1.3.6.1.4.1.2636.3.70.1.1.2.1.18 integer32 read-write
This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count.
                 jnxIfOtnOTUkPreFecBERThresholdClearExponent 1.3.6.1.4.1.2636.3.70.1.1.2.1.19 integer32 read-write
This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count.
         jnxIfOtnODUkCfgTable 1.3.6.1.4.1.2636.3.70.1.1.3 no-access
Information about the Otn ODUk config table.
             jnxIfOtnODUkCfgEntry 1.3.6.1.4.1.2636.3.70.1.1.3.1 no-access
A conceptual row that contains information about the Otn ODUk config.
                 jnxIfOtnODUkCfgContainerIndex 1.3.6.1.4.1.2636.3.70.1.1.3.1.1 integer32 no-access
The associated jnxContentsContainerIndex - eg shelf..
                 jnxIfOtnODUkCfgL1Index 1.3.6.1.4.1.2636.3.70.1.1.3.1.2 integer32 no-access
The level one index associated with this subject ... eg fpc slot.
                 jnxIfOtnODUkCfgL2Index 1.3.6.1.4.1.2636.3.70.1.1.3.1.3 integer32 no-access
The level two index associated with this subject .. eg pic slot.
                 jnxIfOtnODUkCfgL3Index 1.3.6.1.4.1.2636.3.70.1.1.3.1.4 integer32 no-access
The level three index associated with this subject.. eg port.
                 jnxIfOtnODUkAPSPCC0 1.3.6.1.4.1.2636.3.70.1.1.3.1.5 integer32 read-write
Read/Write APS PCC byte 0 for this ODUk only.
                 jnxIfOtnODUkAPSPCC1 1.3.6.1.4.1.2636.3.70.1.1.3.1.6 integer32 read-write
Read/Write APS PCC byte 1 for this ODUk only.
                 jnxIfOtnODUkAPSPCC2 1.3.6.1.4.1.2636.3.70.1.1.3.1.7 integer32 read-write
Read/Write APS PCC byte 2 for this ODUk only.
                 jnxIfOtnODUkAPSPCC3 1.3.6.1.4.1.2636.3.70.1.1.3.1.8 integer32 read-write
Read/Write APS PCC byte 3 for this ODUk only.
                 jnxIfOtnODUkPayloadType 1.3.6.1.4.1.2636.3.70.1.1.3.1.9 integer32 read-write
Read/Write Payload Type for ODUk only.
                 jnxIfOtnODUkTIMActEnabled 1.3.6.1.4.1.2636.3.70.1.1.3.1.10 truthvalue read-write
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2).
                 jnxIfOtnODUkTxTTI 1.3.6.1.4.1.2636.3.70.1.1.3.1.11 octet string read-write
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
                 jnxIfOtnODUkRxTTI 1.3.6.1.4.1.2636.3.70.1.1.3.1.12 octet string read-only
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
                 jnxIfOtnODUkExpectedRxSapi 1.3.6.1.4.1.2636.3.70.1.1.3.1.13 octet string read-write
Expected receive SAPI for this layer.
                 jnxIfOtnODUkExpectedRxDapi 1.3.6.1.4.1.2636.3.70.1.1.3.1.14 octet string read-write
Expected receive DAPI for this layer.
                 jnxIfOtnODUkStatus 1.3.6.1.4.1.2636.3.70.1.1.3.1.15 bits read-only
The status at the ODUk layer Only some of these alarms are valid for the TCM layer Bits: 'oci': 10, 'ptm': 13, 'biae': 6, 'iae': 2, 'csf': 9, 'bdi': 1, 'ais': 0, 'lck': 11, 'ltc': 12, 'tsf': 7, 'ttim': 3, 'ssf': 8, 'sf': 4, 'sd': 5.
                 jnxIfOtnODUkRxPayloadType 1.3.6.1.4.1.2636.3.70.1.1.3.1.16 integer32 read-only
Receive Payload Type for ODUk only.
         jnxIfOtnTcmCfgTable 1.3.6.1.4.1.2636.3.70.1.1.4 no-access
Information about the Otn TCM config table.
             jnxIfOtnTcmCfgEntry 1.3.6.1.4.1.2636.3.70.1.1.4.1 no-access
A conceptual row that contains information about the Otn Tcm config.
                 jnxIfOtnTcmCfgContainerIndex 1.3.6.1.4.1.2636.3.70.1.1.4.1.1 integer32 no-access
The associated jnxContentsContainerIndex - eg shelf.
                 jnxIfOtnTcmCfgL1Index 1.3.6.1.4.1.2636.3.70.1.1.4.1.2 integer32 no-access
The level one index associated with this subject ... eg fpc slot.
                 jnxIfOtnTcmCfgL2Index 1.3.6.1.4.1.2636.3.70.1.1.4.1.3 integer32 no-access
The level two index associated with this subject .. eg pic slot.
                 jnxIfOtnTcmCfgL3Index 1.3.6.1.4.1.2636.3.70.1.1.4.1.4 integer32 no-access
The level three index associated with this subject.. eg port.
                 jnxIfOtnTcmCfgLevel 1.3.6.1.4.1.2636.3.70.1.1.4.1.5 integer32 no-access
The TCM level for the Table
                 jnxIfOtnTCMEnable 1.3.6.1.4.1.2636.3.70.1.1.4.1.6 truthvalue read-write
Enable this TCM layer (only for TCM layers)
                 jnxIfOtnTcmTxTTI 1.3.6.1.4.1.2636.3.70.1.1.4.1.7 octet string read-write
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
                 jnxIfOtnTcmRxTTI 1.3.6.1.4.1.2636.3.70.1.1.4.1.8 octet string read-only
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
                 jnxIfOtnTcmExpectedRxSapi 1.3.6.1.4.1.2636.3.70.1.1.4.1.9 octet string read-write
Expected receive SAPI for this layer.
                 jnxIfOtnTcmExpectedRxDapi 1.3.6.1.4.1.2636.3.70.1.1.4.1.10 octet string read-write
Expected receive DAPI for this layer.
                 jnxIfOtnTcmStatus 1.3.6.1.4.1.2636.3.70.1.1.4.1.11 bits read-only
The status at the TCM layer. Bits: 'biae': 6, 'iae': 2, 'bdi': 1, 'ais': 0, 'ltc': 9, 'tsf': 7, 'ttim': 3, 'ssf': 8.
         jnxIfOtnODUkTcmTestTable 1.3.6.1.4.1.2636.3.70.1.1.5 no-access
Information about the Otn ODUk Test function table.
             jnxIfOtnODUkTcmTestEntry 1.3.6.1.4.1.2636.3.70.1.1.5.1 no-access
A conceptual row that contains information about the Otn ODUk Test function.
                 jnxIfOtnODUkTcmTestLayer 1.3.6.1.4.1.2636.3.70.1.1.5.1.1 jnxifotnlayer no-access
The layer OTU/ODU/TCM layer for the alarm
                 jnxIfOtnODUkTcmTestTCMLevel 1.3.6.1.4.1.2636.3.70.1.1.5.1.2 integer32 no-access
For ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6.
                 jnxIfOtnODUkTcmInsertAis 1.3.6.1.4.1.2636.3.70.1.1.5.1.3 truthvalue read-write
Insert ODU Ais into OTN stream.
                 jnxIfOtnODUkTcmInsertLck 1.3.6.1.4.1.2636.3.70.1.1.5.1.4 truthvalue read-write
Insert ODU Lck into OTN stream.
                 jnxIfOtnODUkTcmInsertOci 1.3.6.1.4.1.2636.3.70.1.1.5.1.5 truthvalue read-write
Insert ODU Oci into OTN stream.
                 jnxIfOtnODUkPayloadPRBS 1.3.6.1.4.1.2636.3.70.1.1.5.1.6 truthvalue read-write
Insert Payload PRBS, For ODUK layer and TCM level is 0.
                 jnxIfOtnODUkPayloadPRBSResult 1.3.6.1.4.1.2636.3.70.1.1.5.1.7 octet string read-only
Result of the Payload PRBS .
         jnxIfOtnODUkTcmDMTable 1.3.6.1.4.1.2636.3.70.1.1.6 no-access
Table for Otn ODUk/TCM Delay Measurement config table.
             jnxIfOtnODUkTcmDMEntry 1.3.6.1.4.1.2636.3.70.1.1.6.1 no-access
A conceptual row that contains information about the Delay Measurement test table.
                 jnxIfOtnODUkTcmDMLayer 1.3.6.1.4.1.2636.3.70.1.1.6.1.1 jnxifotnlayer no-access
The layer OTU/ODU/TCM layer for the alarm
                 jnxIfOtnODUkTcmDMLevel 1.3.6.1.4.1.2636.3.70.1.1.6.1.2 integer32 no-access
For ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6.
                 jnxIfOtnDMConnectionMonitoringEndpoint 1.3.6.1.4.1.2636.3.70.1.1.6.1.3 truthvalue read-write
Originate Connection Monitoring Endpoint for the Delay Measurement
                 jnxIfOtnDMBypass 1.3.6.1.4.1.2636.3.70.1.1.6.1.4 truthvalue read-write
Act as tandem, passing Dm value through node
                 jnxIfOtnDMPersistFrames 1.3.6.1.4.1.2636.3.70.1.1.6.1.5 integer32 read-write
Number of consequtive frames required to declare Dm Complete
                 jnxIfOtnDMEnable 1.3.6.1.4.1.2636.3.70.1.1.6.1.6 truthvalue read-write
Start/Stop the DM measurement
         jnxIfOtnNotificationTrigDefaultHoldtimeUp 1.3.6.1.4.1.2636.3.70.1.1.7 integer32 read-write
This object will indicate the time (ms) for the defect to persist before it is declared an alarm.
         jnxIfOtnNotificationTrigDefaultHoldtimeDown 1.3.6.1.4.1.2636.3.70.1.1.8 integer32 read-write
This object will indicate the time (ms) for the defect to absent before the alarm is cleared.
         jnxIfOtnNotificationTrigTable 1.3.6.1.4.1.2636.3.70.1.1.9 no-access
Information about the otn Alarm/Alart/Info trigger table.
             jnxIfOtnNotificationTrigEntry 1.3.6.1.4.1.2636.3.70.1.1.9.1 no-access
A conceptual row that contains information about the Otn Alarm Trigger Table.
                 jnxIfOtnNotificationTrigContainerIndex 1.3.6.1.4.1.2636.3.70.1.1.9.1.1 integer32 no-access
The associated jnxContentsContainerIndex - eg shelf.
                 jnxIfOtnNotificationTrigL1Index 1.3.6.1.4.1.2636.3.70.1.1.9.1.2 integer32 no-access
The level one index associated with this subject ... eg fpc slot.
                 jnxIfOtnNotificationTrigL2Index 1.3.6.1.4.1.2636.3.70.1.1.9.1.3 integer32 no-access
The level two index associated with this subject .. eg pic slot.
                 jnxIfOtnNotificationTrigL3Index 1.3.6.1.4.1.2636.3.70.1.1.9.1.4 integer32 no-access
The level three index associated with this subject.. eg port.
                 jnxIfOtnNotificationTrigLayer 1.3.6.1.4.1.2636.3.70.1.1.9.1.5 jnxifotnlayer no-access
The layer OTU/ODU/TCM layer for the alarm
                 jnxIfOtnNotificationTrigTCMLevel 1.3.6.1.4.1.2636.3.70.1.1.9.1.6 integer32 no-access
For OCh/OTUk/ODUk will be this will be 0 If layer is TCM then this will give the TCM level 1..6.
                 jnxIfOtnNotificationTrigAlmId 1.3.6.1.4.1.2636.3.70.1.1.9.1.7 integer32 no-access
This will be the ID of Alarm for that layer 'JnxoptIfOTNOChAlarms'/'JnxoptIfOTNODUkTcmAlarms'.
                 jnxIfOtnNotificationTrigSeverity 1.3.6.1.4.1.2636.3.70.1.1.9.1.8 jnxifotnseverity read-write
This will be the Severity of the Notification for that layer.
                 jnxIfOtnNotificationTrigIgnore 1.3.6.1.4.1.2636.3.70.1.1.9.1.9 truthvalue read-write
This object will ignore the alarm when set.
                 jnxIfOtnNotificationTrigHoldtimeUp 1.3.6.1.4.1.2636.3.70.1.1.9.1.10 integer32 read-write
This object will indicate the time (ms) for the defect to persist before it is declared an alarm.
                 jnxIfOtnNotificationTrigHoldtimeDown 1.3.6.1.4.1.2636.3.70.1.1.9.1.11 integer32 read-write
This object will indicate the time (ms) for the defect is absent before the alarm is cleared.
                 jnxIfOtnTrigServiceStateAction 1.3.6.1.4.1.2636.3.70.1.1.9.1.12 jnxifotnservicestateaction read-only
This will indicate whether this alarm is service affecting or not .
         jnxOtnClearAllPMs 1.3.6.1.4.1.2636.3.70.1.1.10 truthvalue read-write
To clear all Performance monitoring counters on OTN interfaces
         jnxOtnClearInterfacePMs 1.3.6.1.4.1.2636.3.70.1.1.11 truthvalue read-write
To clear all Performance monitoring counters on this OTN interfaces
         jnxOtnClearInterfaceCurrentPM 1.3.6.1.4.1.2636.3.70.1.1.12 truthvalue read-write
To clear the current Performance monitoring counters on this OTN interfaces
         jnxOtnClearIfPMsTable 1.3.6.1.4.1.2636.3.70.1.1.13 no-access
To clear OTN Performance monitoring counters on this OTN interfaces
               jnxOtnClearIfPMsEntry 1.3.6.1.4.1.2636.3.70.1.1.13.1 no-access
A conceptual row that s used to clear the OTN PM Table.
                   jnxOtnClearCurrent 1.3.6.1.4.1.2636.3.70.1.1.13.1.1 truthvalue read-write
1- to clear all the current OTN PM's for this interface
                   jnxOtnClearInterfaceInterval 1.3.6.1.4.1.2636.3.70.1.1.13.1.2 truthvalue read-write
1- to clear all the OTN PM's intervals(1-96) for this interface
                   jnxOtnClearInterfaceDay 1.3.6.1.4.1.2636.3.70.1.1.13.1.3 truthvalue read-write
1 - to clear all the Current Day and Previous Day OTN PM's for this interface
                   jnxOtnClearInterfaceAll 1.3.6.1.4.1.2636.3.70.1.1.13.1.4 truthvalue read-write
1 - to clear all the OTN PM's for this interface
     jnxIfOtnOCh2 1.3.6.1.4.1.2636.3.70.1.2
         jnxIfOtnOCh2CfgTable 1.3.6.1.4.1.2636.3.70.1.2.1 no-access
Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn OCh2 Config Table.
             jnxIfOtnOCh2CfgEntry 1.3.6.1.4.1.2636.3.70.1.2.1.1 no-access
A conceptual row that contains of the Otn OCh2 Config Table.
                 jnxIfOtnOCh2CfgContainerIndex 1.3.6.1.4.1.2636.3.70.1.2.1.1.1 integer32 no-access
Container Index associated with the object instance.
                 jnxIfOtnOCh2CfgL1Index 1.3.6.1.4.1.2636.3.70.1.2.1.1.2 integer32 no-access
FPC slot number of the interface.
                 jnxIfOtnOCh2CfgL2Index 1.3.6.1.4.1.2636.3.70.1.2.1.1.3 integer32 no-access
PIC slot number of the interface.
                 jnxIfOtnOCh2CfgL3Index 1.3.6.1.4.1.2636.3.70.1.2.1.1.4 integer32 no-access
Port number of the interface.
                 jnxIfOtnOCh2CfgL4Index 1.3.6.1.4.1.2636.3.70.1.2.1.1.5 integer32 no-access
Sub-Port number of the interface.
                 jnxIfOtnOCh2LocalLoopback 1.3.6.1.4.1.2636.3.70.1.2.1.1.6 truthvalue read-write
This is the local loopback at the Line (after the optics).
                 jnxIfOtnOCh2LineLoopback 1.3.6.1.4.1.2636.3.70.1.2.1.1.7 truthvalue read-write
This is the line loopback at the Line.
                 jnxIfOtnOCh2PayloadLoopback 1.3.6.1.4.1.2636.3.70.1.2.1.1.8 truthvalue read-write
This is the Payload loopback before the optics.
                 jnxIfOtnOCh2AdminState 1.3.6.1.4.1.2636.3.70.1.2.1.1.9 jnxifadminstates read-write
The Admin state of this interface
                 jnxIfOtnOCh2OperState 1.3.6.1.4.1.2636.3.70.1.2.1.1.10 jnxifoperstates read-only
The operational state of this interface
                 jnxIfOtnOCh2Index 1.3.6.1.4.1.2636.3.70.1.2.1.1.11 unsigned32 read-only
The interface ifIndex of this interface
                 jnxIfOtnOCh2Status 1.3.6.1.4.1.2636.3.70.1.2.1.1.12 bits read-only
The interface status at the OCh layer. Bits: 'los': 0, 'wavelengthlockerr': 3, 'lof': 1, 'lom': 2.
                 jnxIfOtnOCh2PortMode 1.3.6.1.4.1.2636.3.70.1.2.1.1.13 unsigned32 read-only
The Port Mode for this interface 0 - default (not applicable) 1 - lan 2 - wan 3 - gfp
         jnxIfOtnOCh2OTUkCfgTable 1.3.6.1.4.1.2636.3.70.1.2.2 no-access
Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn OCh2 OTUk config table.
             jnxIfOtnOCh2OTUkCfgEntry 1.3.6.1.4.1.2636.3.70.1.2.2.1 no-access
A conceptual row that contains the Otn OCh2 OTUk config table.
                 jnxIfOtnOCh2OTUkCfgContIndx 1.3.6.1.4.1.2636.3.70.1.2.2.1.1 integer32 no-access
Container Index associated with the object instance.
                 jnxIfOtnOCh2OTUkCfgL1Index 1.3.6.1.4.1.2636.3.70.1.2.2.1.2 integer32 no-access
FPC slot number of the interface.
                 jnxIfOtnOCh2OTUkCfgL2Index 1.3.6.1.4.1.2636.3.70.1.2.2.1.3 integer32 no-access
PIC slot number of the interface.
                 jnxIfOtnOCh2OTUkCfgL3Index 1.3.6.1.4.1.2636.3.70.1.2.2.1.4 integer32 no-access
Port number of the interface.
                 jnxIfOtnOCh2OTUkCfgL4Index 1.3.6.1.4.1.2636.3.70.1.2.2.1.5 integer32 no-access
Port number of the interface.
                 jnxIfOtnOCh2OTUkCfgRate 1.3.6.1.4.1.2636.3.70.1.2.2.1.6 jnxifotnrate read-write
This is the rate for the interface and the rates depend on the interface/fru type.
                 jnxIfOtnOCh2OTUkCfgFecMode 1.3.6.1.4.1.2636.3.70.1.2.2.1.7 jnxifotnfectype read-write
This is the Fec type in the OTU frame and the selection depends on the interface/fru type.
                 jnxIfOtnOCh2OTUkEnAutoFrrByteIns 1.3.6.1.4.1.2636.3.70.1.2.2.1.8 truthvalue read-write
This will enable/disable the automatic insertion of the frr SF/SD byte in the overhead bytes(RES)
                 jnxIfOtnOCh2OTUkEnBERFrrSupport 1.3.6.1.4.1.2636.3.70.1.2.2.1.9 truthvalue read-write
This will enable/disable the FRR support for BER
                 jnxIfOtnOCh2OTUkPreFecBERThMant 1.3.6.1.4.1.2636.3.70.1.2.2.1.10 integer32 read-write
This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade.
                 jnxIfOtnOCh2OTUkPreFecBERThExpo 1.3.6.1.4.1.2636.3.70.1.2.2.1.11 integer32 read-write
This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade.
                 jnxIfOtnOCh2OTUkPreFecBERThTime 1.3.6.1.4.1.2636.3.70.1.2.2.1.12 integer32 read-write
The collection times (1ms - 1sec) to calculate the BER.
                 jnxIfOtnOCh2OTUkTIMActEnabled 1.3.6.1.4.1.2636.3.70.1.2.2.1.13 truthvalue read-write
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2).
                 jnxIfOtnOCh2OTUkTxTTI 1.3.6.1.4.1.2636.3.70.1.2.2.1.14 octet string read-write
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined
                 jnxIfOtnOCh2OTUkRxTTI 1.3.6.1.4.1.2636.3.70.1.2.2.1.15 octet string read-only
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined
                 jnxIfOtnOCh2OTUkExpectedRxSapi 1.3.6.1.4.1.2636.3.70.1.2.2.1.16 octet string read-write
Expected receive SAPI.
                 jnxIfOtnOCh2OTUkExpectedRxDapi 1.3.6.1.4.1.2636.3.70.1.2.2.1.17 octet string read-write
Expected receive DAPI.
                 jnxIfOtnOCh2OTUkStatus 1.3.6.1.4.1.2636.3.70.1.2.2.1.18 bits read-only
The interface status at the OTUk layer. Bits: 'biae': 6, 'fecdegrade': 10, 'iae': 2, 'bdi': 1, 'ais': 0, 'tsf': 7, 'fecexcessive': 9, 'ttim': 3, 'ssf': 8, 'sf': 4, 'sd': 5.
                 jnxIfOtnOCh2OTUkPreFecBERThClrMn 1.3.6.1.4.1.2636.3.70.1.2.2.1.19 integer32 read-write
This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count.
                 jnxIfOtnOCh2OTUkPreFecBERThClrEx 1.3.6.1.4.1.2636.3.70.1.2.2.1.20 integer32 read-write
This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold error count.
         jnxIfOtnOCh2ODUkCfgTable 1.3.6.1.4.1.2636.3.70.1.2.3 no-access
Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn ODUk config table.
             jnxIfOtnOCh2ODUkCfgEntry 1.3.6.1.4.1.2636.3.70.1.2.3.1 no-access
A conceptual row that contains information about the Otn ODUk config.
                 jnxIfOtnOCh2ODUkCfgContIndx 1.3.6.1.4.1.2636.3.70.1.2.3.1.1 integer32 no-access
Container Index associated with the Object Instance.
                 jnxIfOtnOCh2ODUkCfgL1Index 1.3.6.1.4.1.2636.3.70.1.2.3.1.2 integer32 no-access
FPC slot number of the interface.
                 jnxIfOtnOCh2ODUkCfgL2Index 1.3.6.1.4.1.2636.3.70.1.2.3.1.3 integer32 no-access
PIC slot number of the interface.
                 jnxIfOtnOCh2ODUkCfgL3Index 1.3.6.1.4.1.2636.3.70.1.2.3.1.4 integer32 no-access
Port number of the interface.
                 jnxIfOtnOCh2ODUkCfgL4Index 1.3.6.1.4.1.2636.3.70.1.2.3.1.5 integer32 no-access
Sub-Port number of the interface.
                 jnxIfOtnOCh2ODUkAPSPCC0 1.3.6.1.4.1.2636.3.70.1.2.3.1.6 integer32 read-write
Read/Write APS PCC byte 0 for this ODUk only.
                 jnxIfOtnOCh2ODUkAPSPCC1 1.3.6.1.4.1.2636.3.70.1.2.3.1.7 integer32 read-write
Read/Write APS PCC byte 1 for this ODUk only.
                 jnxIfOtnOCh2ODUkAPSPCC2 1.3.6.1.4.1.2636.3.70.1.2.3.1.8 integer32 read-write
Read/Write APS PCC byte 2 for this ODUk only.
                 jnxIfOtnOCh2ODUkAPSPCC3 1.3.6.1.4.1.2636.3.70.1.2.3.1.9 integer32 read-write
Read/Write APS PCC byte 3 for this ODUk only.
                 jnxIfOtnOCh2ODUkPayloadType 1.3.6.1.4.1.2636.3.70.1.2.3.1.10 integer32 read-write
Read/Write Payload Type for ODUk only.
                 jnxIfOtnOCh2ODUkTIMActEnabled 1.3.6.1.4.1.2636.3.70.1.2.3.1.11 truthvalue read-write
Indicates whether the Trace Identifier Mismatch (TIM) Consequent Action function is enabled. The default value of this object is false(2).
                 jnxIfOtnOCh2ODUkTxTTI 1.3.6.1.4.1.2636.3.70.1.2.3.1.12 octet string read-write
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
                 jnxIfOtnOCh2ODUkRxTTI 1.3.6.1.4.1.2636.3.70.1.2.3.1.13 octet string read-only
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
                 jnxIfOtnOCh2ODUkExpectedRxSapi 1.3.6.1.4.1.2636.3.70.1.2.3.1.14 octet string read-write
Expected receive SAPI for this layer.
                 jnxIfOtnOCh2ODUkExpectedRxDapi 1.3.6.1.4.1.2636.3.70.1.2.3.1.15 octet string read-write
Expected receive DAPI for this layer.
                 jnxIfOtnOCh2ODUkStatus 1.3.6.1.4.1.2636.3.70.1.2.3.1.16 bits read-only
The status at the ODUk layer Only some of these alarms are valid for the TCM layer Bits: 'oci': 10, 'ptm': 13, 'biae': 6, 'iae': 2, 'csf': 9, 'bdi': 1, 'ais': 0, 'lck': 11, 'ltc': 12, 'tsf': 7, 'ttim': 3, 'ssf': 8, 'sf': 4, 'sd': 5.
                 jnxIfOtnOCh2ODUkRxPayloadType 1.3.6.1.4.1.2636.3.70.1.2.3.1.17 integer32 read-only
Receive Payload Type for ODUk only.
         jnxIfOtnOCh2TcmCfgTable 1.3.6.1.4.1.2636.3.70.1.2.4 no-access
Table was for 48x10G/12x40G gingerALE PIC in 10G mode. It is not supported hence marked as obsolete. Information about the Otn TCM config table.
             jnxIfOtnOCh2TcmCfgEntry 1.3.6.1.4.1.2636.3.70.1.2.4.1 no-access
A conceptual row that contains information about the Otn Tcm config.
                 jnxIfOtnOCh2TcmCfgContIndx 1.3.6.1.4.1.2636.3.70.1.2.4.1.1 integer32 no-access
Container Index associated with the object.
                 jnxIfOtnOCh2TcmCfgL1Index 1.3.6.1.4.1.2636.3.70.1.2.4.1.2 integer32 no-access
FPC slot number of the interface.
                 jnxIfOtnOCh2TcmCfgL2Index 1.3.6.1.4.1.2636.3.70.1.2.4.1.3 integer32 no-access
PIC slot number of the interface.
                 jnxIfOtnOCh2TcmCfgL3Index 1.3.6.1.4.1.2636.3.70.1.2.4.1.4 integer32 no-access
Port number of the interface.
                 jnxIfOtnOCh2TcmCfgL4Index 1.3.6.1.4.1.2636.3.70.1.2.4.1.5 integer32 no-access
Sub-Port number of the interface.
                 jnxIfOtnOCh2TcmCfgLevel 1.3.6.1.4.1.2636.3.70.1.2.4.1.6 integer32 no-access
The TCM level for the Table
                 jnxIfOtnOCh2TCMEnable 1.3.6.1.4.1.2636.3.70.1.2.4.1.7 truthvalue read-write
Enable this TCM layer (only for TCM layers)
                 jnxIfOtnOCh2TcmTxTTI 1.3.6.1.4.1.2636.3.70.1.2.4.1.8 octet string read-write
The Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
                 jnxIfOtnOCh2TcmRxTTI 1.3.6.1.4.1.2636.3.70.1.2.4.1.9 octet string read-only
The Receive Trace TTI SAPI 0..15, DAPI 16..31 32 ..63 user defined for this layer.
                 jnxIfOtnOCh2TcmExpectedRxSapi 1.3.6.1.4.1.2636.3.70.1.2.4.1.10 octet string read-write
Expected receive SAPI for this layer.
                 jnxIfOtnOCh2TcmExpectedRxDapi 1.3.6.1.4.1.2636.3.70.1.2.4.1.11 octet string read-write
Expected receive DAPI for this layer.
                 jnxIfOtnOCh2TcmStatus 1.3.6.1.4.1.2636.3.70.1.2.4.1.12 bits read-only
The status at the TCM layer. Bits: 'biae': 6, 'iae': 2, 'bdi': 1, 'ais': 0, 'ltc': 9, 'tsf': 7, 'ttim': 3, 'ssf': 8.
 jnxIfOtnNotificationPrefix 1.3.6.1.4.1.2636.4.21.0
     jnxIfOtnNotificationAdminStatus 1.3.6.1.4.1.2636.4.21.0.1
Notification of the admin state of the otn interface.
     jnxIfOtnNotificationOperStatus 1.3.6.1.4.1.2636.4.21.0.2
Notification of operational state of the otn interface