JUNIPER-COLLECTOR-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: JUNIPER-COLLECTOR-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, HCNUM-TC, JUNIPER-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 jnxCollectorMIB 1.3.6.1.4.1.2636.3.28
Provides data about each of the Collector PICs on a router.
       jnxCollGlobalStats 1.3.6.1.4.1.2636.3.28.1
Global, router-wide collector stats.
           jnxCollGlobalCreatedFiles 1.3.6.1.4.1.2636.3.28.1.1 counter64 read-only
The total number of file created by all the collector pics on the router since the last time the router was reset.
           jnxCollGlobalOpenFiles 1.3.6.1.4.1.2636.3.28.1.2 counter64 read-only
The total number of open collector files currently present on the router.
       jnxCollPicIfTable 1.3.6.1.4.1.2636.3.28.2 no-access
Data about each collector pic currently present on the router.
           jnxCollPicIfEntry 1.3.6.1.4.1.2636.3.28.2.1 no-access
Each entry provides information about a single Collector PIC. Each Collector PIC contains a single interface and is identified by its ifIndex.
               jnxCollPicIfCreatedFiles 1.3.6.1.4.1.2636.3.28.2.1.1 counter64 read-only
The total number of files created by this Collector PIC since the last time the PIC was reset.
               jnxCollPicIfCreatedFileRate 1.3.6.1.4.1.2636.3.28.2.1.2 gauge32 read-only
The number of files created per second, measured over the current 10 second interval.
               jnxCollPicIfPeakCreatedFileRate 1.3.6.1.4.1.2636.3.28.2.1.3 gauge32 read-only
The peak number of files created per second.
               jnxCollPicIfExportedFiles 1.3.6.1.4.1.2636.3.28.2.1.4 counter64 read-only
The total number of files exported by this Collector PIC.
               jnxCollPicIfExportedFileRate 1.3.6.1.4.1.2636.3.28.2.1.5 gauge32 read-only
The number of files exported per second, measured over the current 10 second interval.
               jnxCollPicIfPeakExportedFileRate 1.3.6.1.4.1.2636.3.28.2.1.6 gauge32 read-only
The peak number of files exported per second.
               jnxCollPicIfDestroyedFiles 1.3.6.1.4.1.2636.3.28.2.1.7 counter64 read-only
The total number of files destroyed by this Collector PIC.
               jnxCollPicIfDestroyedFileRate 1.3.6.1.4.1.2636.3.28.2.1.8 gauge32 read-only
The number of files destroyed per second, as measured over the current 10 second interval.
               jnxCollPicIfPeakDestroyedFileRate 1.3.6.1.4.1.2636.3.28.2.1.9 gauge32 read-only
The peak number of files destroyed per second.
               jnxCollPicIfProcRecords 1.3.6.1.4.1.2636.3.28.2.1.10 counter64 read-only
The total number of flow records processed by this Collector PIC.
               jnxCollPicIfProcRecordsRate 1.3.6.1.4.1.2636.3.28.2.1.11 gauge32 read-only
The number of flow records processed per seconds, measured during the current 10 second interval.
               jnxCollPicIfPeakProcRecordsRate 1.3.6.1.4.1.2636.3.28.2.1.12 gauge32 read-only
The peak number of flow records processed.
               jnxCollPicIfMemoryUsed 1.3.6.1.4.1.2636.3.28.2.1.13 counterbasedgauge64 read-only
The amount of memory used, in bytes, by this Collector PIC.
               jnxCollPicIfMemoryFree 1.3.6.1.4.1.2636.3.28.2.1.14 counterbasedgauge64 read-only
The amount of memory free, in bytes, on this Collector PIC.
               jnxCollPicIfFtpBytes 1.3.6.1.4.1.2636.3.28.2.1.15 counter64 read-only
The total number of bytes transferred via FTP by this Collector PIC.
               jnxCollPicIfFtpByteRate 1.3.6.1.4.1.2636.3.28.2.1.16 gauge32 read-only
The number of bytes per second transfered via FTP measured during the current 10 second interval.
               jnxCollPicIfPeakFtpByteRate 1.3.6.1.4.1.2636.3.28.2.1.17 gauge32 read-only
The peak number of bytes per second transferred via FTP.
               jnxCollPicIfFtpFiles 1.3.6.1.4.1.2636.3.28.2.1.18 counter64 read-only
The total number of files transferred via FTP by this Collector PIC.
               jnxCollPicIfFtpFileRate 1.3.6.1.4.1.2636.3.28.2.1.19 gauge32 read-only
The number of files per second transferred via FTP.
               jnxCollPicIfPeakFtpFileRate 1.3.6.1.4.1.2636.3.28.2.1.20 gauge32 read-only
The peak number of files per second transferred via FTP.
               jnxCollPicIfFtpFailures 1.3.6.1.4.1.2636.3.28.2.1.21 counterbasedgauge64 read-only
The total number of FTP transfer failures on this Collector PIC.
               jnxCollPicIfCurrentState 1.3.6.1.4.1.2636.3.28.2.1.22 jnxcollpicstatedef read-only
The current state of various error conditions on this Collector PIC.
               jnxCollPicIfLastStateChange 1.3.6.1.4.1.2636.3.28.2.1.23 jnxcollpicstatedef read-only
Identifies the error condition that last changed state.
               jnxCollPicIfStateChangeTime 1.3.6.1.4.1.2636.3.28.2.1.24 timeticks read-only
The value of sysUpTime when the management subsystem last learned of a change to the value of jnxCollPicIfCurrentState for this Collector PIC.
               jnxCollPicIfStateChangeDate 1.3.6.1.4.1.2636.3.28.2.1.25 dateandtime read-only
The system date and time when the management subsystem last learned of a change to the value of jnxCollPicIfCurrentState for this Collector PIC.
               jnxCollPicIfStateChangeType 1.3.6.1.4.1.2636.3.28.2.1.26 integer read-only
This indicates whether the last state change set a new error condition or cleared an existing one. Enumeration: 'none': 1, 'set': 2, 'cleared': 3.
       jnxCollFileTable 1.3.6.1.4.1.2636.3.28.3 no-access
Data about each collector file currently present on the router.
           jnxCollFileEntry 1.3.6.1.4.1.2636.3.28.3.1 no-access
Each entry provides information about a single file currently open on this Collector PIC. Each Collector PIC File is identified by the ifIndex associated with the Collector PIC and the name of the file.
               jnxCollFileName 1.3.6.1.4.1.2636.3.28.3.1.1 displaystring no-access
The name of a Collector File on this Collector PIC.
               jnxCollFileFname 1.3.6.1.4.1.2636.3.28.3.1.2 displaystring read-only
The name of a Collector File on this Collector PIC. This object is included for those NM applications that can't parse the file name from the instance portion of the OIDs and provides the value of jnxCollFileName explicitly.
               jnxCollFileRecords 1.3.6.1.4.1.2636.3.28.3.1.3 counterbasedgauge64 read-only
The number of flow records in this file.
               jnxCollFileRecordRate 1.3.6.1.4.1.2636.3.28.3.1.4 gauge32 read-only
The number of flow records per second added to this file, measured during the current 10 second interval.
               jnxCollFilePeakRecordRate 1.3.6.1.4.1.2636.3.28.3.1.5 gauge32 read-only
The peak number of flow records per second added to this file.
               jnxCollFileUncompBytes 1.3.6.1.4.1.2636.3.28.3.1.6 counterbasedgauge64 read-only
The number of uncompressed bytes in this file.
               jnxCollFileUncompByteRate 1.3.6.1.4.1.2636.3.28.3.1.7 gauge32 read-only
The number of uncompressed bytes per second added to this file.
               jnxCollFilePeakUncompByteRate 1.3.6.1.4.1.2636.3.28.3.1.8 gauge32 read-only
The peak number of uncompressed bytes per second added to this file.
               jnxCollFileCompBytes 1.3.6.1.4.1.2636.3.28.3.1.9 counterbasedgauge64 read-only
The number of compressed bytes in this file.
               jnxCollFileCompByteRate 1.3.6.1.4.1.2636.3.28.3.1.10 gauge32 read-only
The number of compressed bytes per second added to this file, measured during the current 10 second interval.
               jnxCollFilePeakCompByteRate 1.3.6.1.4.1.2636.3.28.3.1.11 gauge32 read-only
The peak number of compressed bytes per second added to this file.
               jnxCollFileBlocks 1.3.6.1.4.1.2636.3.28.3.1.12 gauge32 read-only
The number of blocks in this file.
               jnxCollFileCompBlocks 1.3.6.1.4.1.2636.3.28.3.1.14 gauge32 read-only
The number of compressed blocks in this file.
               jnxCollFileTransferAttempts 1.3.6.1.4.1.2636.3.28.3.1.15 gauge32 read-only
The number of FTP transfer attempts for this file.
               jnxCollFileState 1.3.6.1.4.1.2636.3.28.3.1.16 integer read-only
The current state of this file. Enumeration: 'active': 2, 'unknown': 1, 'export2': 5, 'export1': 4, 'wait': 3.
       jnxCollNotifyVars 1.3.6.1.4.1.2636.3.28.4
Notification object definitions.
           jnxCollNotifyUrl 1.3.6.1.4.1.2636.3.28.4.1 displaystring no-access
The URL associated with a file transfer destination.
           jnxCollNotifyInetType 1.3.6.1.4.1.2636.3.28.4.2 inetaddresstype no-access
Used with jnxCollNotifyInetAddress to identify a specific file transfer destination.
           jnxCollNotifyInetAddress 1.3.6.1.4.1.2636.3.28.4.3 inetaddress no-access
Used with jnxCollNotifyInetType to identify a specific file transfer destination.
           jnxCollNotifyError 1.3.6.1.4.1.2636.3.28.4.4 displaystring no-access
Description of error encountered when trying to transfer a file.
           jnxCollNotifyFile 1.3.6.1.4.1.2636.3.28.4.5 displaystring no-access
Identifies a specific file for notifications that refer to a file.
           jnxCollNotifyFtpResultCode 1.3.6.1.4.1.2636.3.28.4.6 integer32 no-access
Provides the FTP result code for file transfer notifications.
           jnxCollNotifyFtpErrorText 1.3.6.1.4.1.2636.3.28.4.7 displaystring no-access
Provides the FTP error text for file transfer notifications.
           jnxCollNotifyMemUtil 1.3.6.1.4.1.2636.3.28.4.8 gauge32 no-access
Provides the current memory utilization for pic overload notifications.
           jnxCollNotifyMemFree 1.3.6.1.4.1.2636.3.28.4.9 gauge32 no-access
Provides the current amount of free memory for pic overload notifications.
           jnxCollNotifyMemThresh 1.3.6.1.4.1.2636.3.28.4.10 gauge32 no-access
Provides the current memory threshold used for determining memory unavailable conditions.
           jnxCollNotifyNewRecordRate 1.3.6.1.4.1.2636.3.28.4.11 gauge32 no-access
Provides the current number of new records per second created on this Collector PIC.
           jnxCollNotifyOverloadType 1.3.6.1.4.1.2636.3.28.4.12 integer no-access
Identifies a specific type of flow overload condition on this Collector PIC. Enumeration: 'hardOverload': 2, 'softOverload': 1.
           jnxCollNotifyDate 1.3.6.1.4.1.2636.3.28.4.13 dateandtime no-access
Provides the current system date and time.
           jnxCollNotifyFromFtpServerInetType 1.3.6.1.4.1.2636.3.28.4.14 inetaddresstype no-access
Used with jnxCollNotifyFromFtpServerInetAddress to identify a specific FTP server address.
           jnxCollNotifyFromFtpServerInetAddress 1.3.6.1.4.1.2636.3.28.4.15 inetaddress no-access
The FTP server address from which the switchover occurs.
           jnxCollNotifyFromFtpServerType 1.3.6.1.4.1.2636.3.28.4.16 integer no-access
The FTP server Type from which the switchover occurs. Enumeration: 'primary': 1, 'secondary': 2.
           jnxCollNotifyToFtpServerInetType 1.3.6.1.4.1.2636.3.28.4.17 inetaddresstype no-access
Used with jnxCollNotifyToFtpServerInetAddress to identify a specific FTP server address.
           jnxCollNotifyToFtpServerInetAddress 1.3.6.1.4.1.2636.3.28.4.18 inetaddress no-access
The FTP server address to which the switchover occurs.
           jnxCollNotifyToFtpServerType 1.3.6.1.4.1.2636.3.28.4.19 integer no-access
The FTP server Type to which the switchover occurs. Enumeration: 'primary': 1, 'secondary': 2.
           jnxCollNotifyInitiatedBy 1.3.6.1.4.1.2636.3.28.4.20 integer no-access
Identify what initiates the FTP switchover. Enumeration: 'automatic': 2, 'cli': 1.
     jnxCollNotificationPrefix 1.3.6.1.4.1.2636.4.8.0
All collector notifications are registered under this branch.
         jnxCollUnavailableDest 1.3.6.1.4.1.2636.4.8.0.1
Notification of an unavailable destination failure encountered while transferring a collector file.
         jnxCollUnavailableDestCleared 1.3.6.1.4.1.2636.4.8.0.2
This indicates a previous unavailable destination failure has been resolved.
         jnxCollUnsuccessfulTransfer 1.3.6.1.4.1.2636.4.8.0.3
This indicates an error was encountered while attempting a file transfer.
         jnxCollFlowOverload 1.3.6.1.4.1.2636.4.8.0.4
This indicates a soft or hard flow overload condition has been triggered.
         jnxCollFlowOverloadCleared 1.3.6.1.4.1.2636.4.8.0.5
This indicates a soft or hard flow overload condition has been cleared.
         jnxCollMemoryUnavailable 1.3.6.1.4.1.2636.4.8.0.6
This indicates a memory unavailable condition has been triggered.
         jnxCollMemoryAvailable 1.3.6.1.4.1.2636.4.8.0.7
This indicates a memory unavailable condition has been cleared.
         jnxCollFtpSwitchover 1.3.6.1.4.1.2636.4.8.0.8
This indicates an FTP server switchover has occurred.