ITOUCHHUB: View SNMP OID List / Download MIB

VENDOR: MRV COMMUNICATIONS


 Home MIB: ITOUCHHUB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
                                             slotBootControlController 0.0.1.3.6.1.4.1.33.16.6.1.1.4
The instance identifier of the first object in the conceptual row entry for the controller this entry selects for bootstrap operation, that is, controllerType. This entry must be compatible with slotBootControlNetwork, including being of the same network type. The value 0.0 indicates default action.
                                             slotBootControlNetwork 0.0.1.3.6.1.4.1.33.16.6.1.1.5
The instance identifier of the first object in the conceptual row entry for the segment or port this entry selects for bootstrap operation, that is, segmentType or portType. This entry must be compatible with slotBootControlController, including being of the same network type. The value 0.0 indicates default action.
             iTouch 1.3.6.1.4.1.33
                   xSystem 1.3.6.1.4.1.33.1
                       sysIdent 1.3.6.1.4.1.33.1.1
An identification string for local and remote displays. Corresponds directly to SERVER IDENTIFICATION and the value labeled Identification: on the SERVER CHARACTERISTICS display.
                       sysDefineMode 1.3.6.1.4.1.33.1.2
The systems operation with regard to DEFINE commands. permOnly indicates that DEFINE commands modify only the permanent data base. operAndPerm indicates that DEFINE commands modify both operational and permanent data bases, unless specifically documented to the contrary. Corresponds to SERVER CHANGE and the presence of the label CHANGE in the SERVER CHARACTERISTICS display.
                       sysDateTime 1.3.6.1.4.1.33.1.3
The systems current local date and time. Corresponds directly to SERVER DATE and SERVER TIME and the value in various displays.
                       sysTimeZone 1.3.6.1.4.1.33.1.4
The adjustment to apply to a universal (Greenwich) time received when down-line loaded, comprising two octets. The first octet is the number of hours west of universal, the second is the number of minutes. Corresponds directly to SERVER TIMEZONE and the value labeled Timezone: in the SERVER CHARACTERISTICS display.
                       sysLoadSoftware 1.3.6.1.4.1.33.1.5
The software file name to request for down-line load of the server. Corresponds directly to SERVER SOFTWARE, and the value labeled Software: in the SERVER CHARACTERISTICS display.
                       sysDump 1.3.6.1.4.1.33.1.6
Control for dumping the systems memory when the system crashes. Corresponds directly to SERVER DUMP and the presence of Dump under the label Enabled Characteristics in the SERVER CHARACTERISTICS display.
                       sysMaintenancePassword 1.3.6.1.4.1.33.1.7
The password a management system must supply to force the system to reboot or use the systems remote console via the Maintenance Operation Protocol (MOP). Corresponds directly to SERVER MAINTENANCE PASSWORD. When setting this value, the management system must supply eight octets, filling with zeros from the first octet. That is, the value 1ab42 would be expressed as 0.0.0.0.0.1.ab.42. Setting the value to zero disables the password check. When returning this value, the agent always returns a zero length OCTET STRING.
                       sysLocalName 1.3.6.1.4.1.33.1.8
The systems local name. Corresponds directly to SERVER NAME and the value labeled Name: in the SERVER CHARACTERISTICS display.
                       sysSoftwareVersionType 1.3.6.1.4.1.33.1.9
The software version variant running in the system. Corresponds to the letter in the software version in the SERVER CHARACTERISTICS display. alpha A: alpha test beta B: beta test production null: normal, production software special S: special, custom software
                       sysSoftwareVersion 1.3.6.1.4.1.33.1.10
The software version running in the system. In order, the octets contain major version, minor version, ECO, and pre-release number. Corresponds to the numbers in the software version in the SERVER CHARACTERISTICS display. For example, the version display for sysSoftwareVersionType production and sysSoftwareVersion 2.2.0.0 is V2.2. The version display for sysSoftwareVersionType beta and sysSoftwareVersion 3.1.0.4 is V3.1B4.
                       sysRomVersion 1.3.6.1.4.1.33.1.11
The firmware version of the bootstrap ROM installed in the system. Corresponds directly to the value labeled Rom in the SERVER CHARACTERISTICS display.
                       sysHardwareType 1.3.6.1.4.1.33.1.12
The type of hardware on which the system is running. Corresponds directly to the value labeled Hardware Type: in the UNIT display.
                       sysHardwareVersion 1.3.6.1.4.1.33.1.13
This version of hardware on which the system is running. Corresponds directly to part of the value labeled HW in the SERVER CHARACTERISTICS display.
                       sysChassisType 1.3.6.1.4.1.33.1.14
The type of chassis in which the system is running. Corresponds directly to part of the value labeled HW in the SERVER CHARACTERISTICS display.
                       sysChassisVersion 1.3.6.1.4.1.33.1.15
This version of chassis in which the system is running. Corresponds directly to part of the value labeled HW in the SERVER CHARACTERISTICS display.
                       sysCrash 1.3.6.1.4.1.33.1.16
Control to cause this system to crash. In response to a get-request or get-next-request, the agent always returns ready for this value. Setting the value to ready has no effect. Setting it to execute causes an immediate crash. Corresponds to the CRASH command.
                       sysInitialize 1.3.6.1.4.1.33.1.17
Control to cause this system to reset its software to initial load values, typically by reloading. When executing an initialize command, the system observes the value of sysInitializeDelay as supplied anywhere in the same set request with sysInitialize. If this value is not included in the set request, the system uses its default value. In response to a get-request or get-next-request, the agent always returns ready for this value. Setting the value to ready has no effect. Setting it to conditionalExecute causes initialization if the overall system state is acceptible (such as not needing to store permanent parameters). Setting it to unconditionalExecute causes initialization regardless of the overall system state. Setting it to cancel aborts an initialization that has not yet started. According to standard SNMP operation, if the system is not in a proper state to accept a given set request for this value, it returns the standard SNMP error badValue. Corresponds to the INITIALIZE command.
                       sysInitializeDelay 1.3.6.1.4.1.33.1.18
The number of minutes to delay before beginning the system initialization process as executed with sysInitialize. This value cannot be set outside a set-request that contains the value execute for sysInitialize. If not included in such a set, the default value is 1. Corresponds to the INITIALIZE commands DELAY parameter and to the value labeled Minutes to shutdown: in the SYSTEM STATUS display.
                       sysZeroAll 1.3.6.1.4.1.33.1.19
Control to zero all counters. In response to a get-request or get-next-request, the agent always returns ready for this value. Setting the value to ready has no effect. Setting it to execute causes all the systems counters to be zeroed. Corresponds to the ZERO ALL command.
                       sysZeroBase 1.3.6.1.4.1.33.1.20
Control to zero all base counters. In response to a get-request or get-next-request, the agent always returns ready for this value. Setting the value to ready has no effect. Setting it to execute causes all the systems base counters to be zeroed. Examples of counters that are zeroed are the SNMP counters or the counters from the SYSTEM COUNTERS display. Examples of counters that are not zeroed are Ethernet interface counters or port counters. Corresponds to the ZERO SYSTEM command.
                       sysZeroBaseTime 1.3.6.1.4.1.33.1.21
The number hundredths of a second since the most recent zeroing of the base counters, such as through execution of sysZeroAll or sysZeroBase. Corresponds directly to the value labeled Seconds Since Zeroed: in the SERVER COUNTERS display.
                       sysLoaderName 1.3.6.1.4.1.33.1.22
The name of the system that provided this systems running software. Corresponds directly to the value labeled Primary Host: in the SERVER STATUS display.
                       sysLoaderAddressType 1.3.6.1.4.1.33.1.23
The type of network address contained in sysLoaderAddress. unknown means no address has been defined. other means no other type value applies. local means there is no address and this systems software was loaded from local storage. ip is an Internet IP address. ethernet is an 802.3 MAC address. Corresponds indirectly to the value labeled Load Address: in the SERVER STATUS display.
                       sysLoaderAddress 1.3.6.1.4.1.33.1.24
The network address of the system that provided this systems running software. Corresponds directly to the value labeled Load Address: in the SERVER STATUS display.
                       sysDumperAddressType 1.3.6.1.4.1.33.1.25
The type of network address contained in sysDumperAddress. unknown means no address has been defined. other means no other type value applies. local means there is no address and this systems was dumped to local storage. ip is an Internet IP address. ethernet is an 802.3 MAC address. Corresponds indirectly to the value labeled Dump Address: in the SERVER STATUS display.
                       sysDumperAddress 1.3.6.1.4.1.33.1.26
The network address of the system that most recently accepted a crash dump from this system. Corresponds directly to the value labeled Dump Address: in the SERVER STATUS display.
                       sysResourceLacks 1.3.6.1.4.1.33.1.27
The number of times a local resource allocation failed, for example due to lack of dynamic memory. Corresponds directly to the value labeled Resource Errors: in the SERVER STATUS display.
                       sysChassisState 1.3.6.1.4.1.33.1.28
For chassis-based systems, the state of the overall chassis. notApplicable indicates the system is not chassis based. noFault indicates no current chassis problem. fault indicates a current chassis problem such as a card or power supply failure. Corresponds directly to the value labeled Crate Current State: in the SERVER ALTERNATE STATUS display.
                       sysChassisFaultTransitions 1.3.6.1.4.1.33.1.29
The number of times this system has seen sysChassisState switch from noFault to fault or from fault to noFault. Corresponds directly to the value labeled Crate Transition Count: in the SERVER ALTERNATE STATUS display.
                       sysResourceNumber 1.3.6.1.4.1.33.1.30
The number of resource entries in the Resource table.
                       sysFeatureNumber 1.3.6.1.4.1.33.1.31
The number of feature entries in the Feature table.
                       resTable 1.3.6.1.4.1.33.1.32
A list of resource entries. The number of entries is given by the value of sysResourceNumber.
                             resEntry 1.3.6.1.4.1.33.1.32.1
Status values for a system resource.
                                 resType 1.3.6.1.4.1.33.1.32.1.1
Identification of a resource type. Typically corresponds directly to a label such as Processes: in the SERVER ALTERNATE STATUS display.
                                 resCurrent 1.3.6.1.4.1.33.1.32.1.2
The number of resources currently in use on the system. Typically corresponds directly to a value labeled Cur in the SERVER ALTERNATE STATUS display.
                                 resWorst 1.3.6.1.4.1.33.1.32.1.3
The highest or lowest value of resCurrent since system initialization. Typically corresponds directly to a value labeled High or Low in the SERVER ALTERNATE STATUS display.
                                 resAdminMaximum 1.3.6.1.4.1.33.1.32.1.4
The desired maximum possible number of resources in the system. In many cases, ACCESS to this object for a particular resType is read-only. Typically corresponds directly to a value labeled Max in the SERVER ALTERNATE STATUS display for desired, administrative values. When the desired change takes effect is implementation specific, ranging from immediately to the next system initialization.
                                 resLacks 1.3.6.1.4.1.33.1.32.1.5
The number of times since system initialization that the system could not obtain the resource because none were available. Typically corresponds directly to a value labeled Failure in the SERVER ALTERNATE STATUS display. If such failures do not apply to the particular resource, such as cpuPercent, the agent returns zero for this object.
                                 resLackTime 1.3.6.1.4.1.33.1.32.1.6
The local system date and time when resLack last increased. Typically corresponds directly to a value labeled Last Occurred in the SERVER ALTERNATE STATUS display. If such failures do not apply to the particular resource, such as cpuPercent, the agent returns all zeroes (unknown) for this object.
                                 resOperMaximum 1.3.6.1.4.1.33.1.32.1.7
The current maximum possible number of resources in the system. Typically corresponds directly to a value labeled Max in the SERVER ALTERNATE STATUS display for current operational values. This value is based on current or previous value of resAdminMaximum.
                       featTable 1.3.6.1.4.1.33.1.33
A list of feature entries. The number of entries is given by the value of sysFeatureNumber.
                             featEntry 1.3.6.1.4.1.33.1.33.1
Status values for a system feature.
                                 featType 1.3.6.1.4.1.33.1.33.1.1
Identification of a feature type. Corresponds to a SERVER feature keyword.
                                 featStatus 1.3.6.1.4.1.33.1.33.1.2
The status of the feature as of the next system initialization. Corresponds to the presence of the features lable following the label Enabled Feature(s): in the UNIT display.
                                 featKey 1.3.6.1.4.1.33.1.33.1.3
The key a management system must supply to make a locked feature available. When unlocking a feature and the management system does not supply a value for featStatus, that objects value is implementation dependent. When returning this value, the agent always returns a zero length DisplayString.
                       xBootControl 1.3.6.1.4.1.33.1.34
                             bootControlLoadInternetFile 1.3.6.1.4.1.33.1.34.1
The filename to request when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD FILE and the value labeled Internet Load File: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlLoadInternetServer 1.3.6.1.4.1.33.1.34.2
The internet address of the server to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD HOST and the value labeled Internet Load Host: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlLoadInternetGateway 1.3.6.1.4.1.33.1.34.3
The internet address of the gateway to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD GATEWAY and the value labeled Internet Load Gateway: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlLoadBootpTftp 1.3.6.1.4.1.33.1.34.4
Control for loading via the combination of BOOTP and TFTP. Corresponds to SERVER LOAD PROTOCOL BOOTPTFTP and the presence of BOOTP/TFTP/ following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlLoadTftpDirect 1.3.6.1.4.1.33.1.34.5
Control for loading via directed TFTP. Corresponds to SERVER LOAD PROTOCOL TFTPDIRECT and the presence of TFTPDIRECT following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlLoadLocal 1.3.6.1.4.1.33.1.34.6
Control for loading from a local medium. Corresponds to SERVER LOAD PROTOCOL LOCAL and the presence of LOCAL following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlLoadMop 1.3.6.1.4.1.33.1.34.7
Control for loading via DEC MOP. Corresponds to SERVER LOAD PROTOCOL MOP and the presence of MOP following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlLoadProprietary 1.3.6.1.4.1.33.1.34.8
Control for loading via ITouch-proprietary extended MOP. Corresponds to SERVER LOAD PROTOCOL PROPRIETARY and the presence of Proprietary following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlLoadRarpTftp 1.3.6.1.4.1.33.1.34.9
Control for loading via the combination of RARP and TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP and the presence of RARP/TFTP following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlDumpBootpTftp 1.3.6.1.4.1.33.1.34.10
Control for dumping via the combination of BOOTP and TFTP. Corresponds to SERVER DUMP PROTOCOL BOOTPTFTP and the presence of BOOTP/TFTP following the label Dump Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlDumpLocal 1.3.6.1.4.1.33.1.34.11
Control for dumping to a local medium. Corresponds to SERVER DUMP PROTOCOL LOCAL and the presence of Local following the label Dump Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlDumpMop 1.3.6.1.4.1.33.1.34.12
Control for dumping via DEC MOP. Corresponds to SERVER DUMP PROTOCOL MOP and the presence of MOP following the label Dump Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlDumpProprietary 1.3.6.1.4.1.33.1.34.13
Control for dumping via ITouch-proprietary extended MOP. Corresponds to SERVER DUMP PROTOCOL PROPRIETARY and the presence of Proprietary following the label Dump Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlDumpRarpTftp 1.3.6.1.4.1.33.1.34.14
Control for dumping via the combination of RARP and TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP and the presence of RARP/TFTP following the label Dump Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlParamBootpTftp 1.3.6.1.4.1.33.1.34.15
Control for loading parameters via the combination of BOOTP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of BOOTP/TFTP following the label Parameter Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlParamLocal 1.3.6.1.4.1.33.1.34.16
Control for loading parameters from a local medium. Corresponds to SERVER PARAMETER PROTOCOL LOCAL and the presence of LOCAL following the label Parameter Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlParamMop 1.3.6.1.4.1.33.1.34.17
Control for loading parameters via DEC MOP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of MOP following the label Parameter Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlParamProprietary 1.3.6.1.4.1.33.1.34.18
Control for loading parameters via ITouch-proprietary extended MOP. Corresponds to SERVER PARAMETER PROTOCOL PROPRIETARY and the presence of Proprietary following the label Parameter Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                             bootControlParamRarpTftp 1.3.6.1.4.1.33.1.34.19
Control for loading parameters via the combination of RARP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL RARPTFTP and the presence of RARP/TFTP following the label Parameter Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                       sysInstalledMemory 1.3.6.1.4.1.33.1.35
The total number of bytes of main memory installed in the system. Corresponds directly to the value labeled Installed on the SERVER ALTERNATE STATUS display. A value of 0 indicates standard memory for the particular hardware.
                       sysTemperatureLevel 1.3.6.1.4.1.33.1.36
The temperature level of the system. unknown indicates the system does not support a temperature sensor. normal indicates a normal temperature level. high indicates an excessive temperature level. Corresponds directly to the value labeled Temperature Level: in the SERVER ALTERNATE STATUS display.
                       bootRecordTable 1.3.6.1.4.1.33.1.37
A list of boot control records.
                             bootRecordEntry 1.3.6.1.4.1.33.1.37.1
Values for a boot record.
                                 bootRecordIndex 1.3.6.1.4.1.33.1.37.1.1
An index value that uniquely identifies a boot control record entry, from 1 to the number of entries for the system.
                                 bootRecordLoadInternetFile 1.3.6.1.4.1.33.1.37.1.2
The filename to request when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD FILE and the value labeled Internet Load File: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordLoadInternetServer 1.3.6.1.4.1.33.1.37.1.3
The internet address of the server to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD HOST and the value labeled Internet Load Host: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordLoadInternetGateway 1.3.6.1.4.1.33.1.37.1.4
The internet address of the gateway to use when loading an image via TFTP. Corresponds directly to SERVER INTERNET LOAD GATEWAY and the value labeled Internet Load Gateway: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordLoadBootpTftp 1.3.6.1.4.1.33.1.37.1.5
Control for loading via the combination of BOOTP and TFTP. Corresponds to SERVER LOAD PROTOCOL BOOTPTFTP and the presence of BOOTP/TFTP/ following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordLoadTftpDirect 1.3.6.1.4.1.33.1.37.1.6
Control for loading via directed TFTP. Corresponds to SERVER LOAD PROTOCOL TFTPDIRECT and the presence of TFTPDIRECT following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordLoadLocal 1.3.6.1.4.1.33.1.37.1.7
Control for loading from a local medium. Corresponds to SERVER LOAD PROTOCOL LOCAL and the presence of LOCAL following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordLoadMop 1.3.6.1.4.1.33.1.37.1.8
Control for loading via DEC MOP. Corresponds to SERVER LOAD PROTOCOL MOP and the presence of MOP following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordLoadProprietary 1.3.6.1.4.1.33.1.37.1.9
Control for loading via ITouch-proprietary extended MOP. Corresponds to SERVER LOAD PROTOCOL PROPRIETARY and the presence of Proprietary following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordLoadRarpTftp 1.3.6.1.4.1.33.1.37.1.10
Control for loading via the combination of RARP and TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP and the presence of RARP/TFTP following the label Load Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordDumpBootpTftp 1.3.6.1.4.1.33.1.37.1.11
Control for dumping via the combination of BOOTP and TFTP. Corresponds to SERVER DUMP PROTOCOL BOOTPTFTP and the presence of BOOTP/TFTP following the label Dump Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordDumpLocal 1.3.6.1.4.1.33.1.37.1.12
Control for dumping to a local medium. Corresponds to SERVER DUMP PROTOCOL LOCAL and the presence of Local following the label Dump Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordDumpMop 1.3.6.1.4.1.33.1.37.1.13
Control for dumping via DEC MOP. Corresponds to SERVER DUMP PROTOCOL MOP and the presence of MOP following the label Dump Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordDumpProprietary 1.3.6.1.4.1.33.1.37.1.14
Control for dumping via ITouch-proprietary extended MOP. Corresponds to SERVER DUMP PROTOCOL PROPRIETARY and the presence of Proprietary following the label Dump Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordDumpRarpTftp 1.3.6.1.4.1.33.1.37.1.15
Control for dumping via the combination of RARP and TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP and the presence of RARP/TFTP following the label Dump Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordParamBootpTftp 1.3.6.1.4.1.33.1.37.1.16
Control for loading parameters via the combination of BOOTP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of BOOTP/TFTP following the label Parameter Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordParamLocal 1.3.6.1.4.1.33.1.37.1.17
Control for loading parameters from a local medium. Corresponds to SERVER PARAMETER PROTOCOL LOCAL and the presence of LOCAL following the label Parameter Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordParamMop 1.3.6.1.4.1.33.1.37.1.18
Control for loading parameters via DEC MOP. Corresponds to SERVER PARAMETER PROTOCOL MOP and the presence of MOP following the label Parameter Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordParamProprietary 1.3.6.1.4.1.33.1.37.1.19
Control for loading parameters via ITouch-proprietary extended MOP. Corresponds to SERVER PARAMETER PROTOCOL PROPRIETARY and the presence of Proprietary following the label Parameter Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordParamRarpTftp 1.3.6.1.4.1.33.1.37.1.20
Control for loading parameters via the combination of RARP and TFTP. Corresponds to SERVER PARAMETER PROTOCOL RARPTFTP and the presence of RARP/TFTP following the label Parameter Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordStatus 1.3.6.1.4.1.33.1.37.1.21
The status of the entry. Set to disabled to disable the entry.
                                 bootRecordMopFile 1.3.6.1.4.1.33.1.37.1.22
The software file name to request for down-line load of the server via MOP or XMOP.
                                 bootRecordInternetAddress 1.3.6.1.4.1.33.1.37.1.23
The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action.
                                 bootRecordParamTftpDirect 1.3.6.1.4.1.33.1.37.1.24
Control for loading parameters via the protocol DTFTP. Corresponds to SERVER PARAMETER PROTOCOL DTFTP and the presence of DTFTP following the label Parameter Protocols Enabled: in the SERVER BOOT CHARACTERISTICS display.
                                 bootRecordInternetDelimiter 1.3.6.1.4.1.33.1.37.1.25
The character separating the load file directory name from the file name.
                       sysLastAgentError 1.3.6.1.4.1.33.1.38
The most recent error the agent encountered in attempting to satisfy an SNMP request. Reading this value has the side effect of resetting it to noError.
                       sysRcpMulticast 1.3.6.1.4.1.33.1.40
Control for sending of the MOP RCP system identifier message. Corresponds directly to the presence of RCP Multicast under the label Enabled Characteristics in the SERVER CHARACTERISTICS display.
                       sysTimeServerAddress 1.3.6.1.4.1.33.1.41
The address of the time server, either an IpAddr or an ethernet address.
                       sysTimeServerConfiguredAddress 1.3.6.1.4.1.33.1.46
The address of a configured time server (, either an IpAddr or an ethernet address).
                       sysTimeServerConfiguredStatus 1.3.6.1.4.1.33.1.47
Control whether the sysTimeServerConfiguredAddress is the only time server used to obtain the time (REQUIRED), the first time server used to obtain the time (ENABLED), or not used to obtain the time (DISABLED).
                       sysBootRecordOverrideDefinedAddress 1.3.6.1.4.1.33.1.48
Control to override the internally defined Internet address with that obtained from the bootp loading protocol.
                       sysBootRecordMessageEnable 1.3.6.1.4.1.33.1.49
Control to display load status messages during reboot. Corresponds directly to the value labeled Status Message: in the SERVER LOADDUMP display.
                       sysBootRecordParamDefaults 1.3.6.1.4.1.33.1.50
Control to use default parameters upon the next reboot after which time this control reverts to disabled. This control only applies to stand-alone devices. Corresponds directly to the value labeled Default Parameters: in the SERVER LOADDUMP display.
                       sysLoginAuthFailureTrapType 1.3.6.1.4.1.33.1.78
Indicates the type of authentication failure which last occurred.
                       sysLoginAuthTrapIdentity 1.3.6.1.4.1.33.1.81
An identification string for the circuit or port where an authentication failure last occurred.
                       sysLocalScriptServer 1.3.6.1.4.1.33.1.82
Control to allow script serving for this system from a script residing in a local flash card.
                       sysInReachManagementSecurityStatus 1.3.6.1.4.1.33.1.83
Indicates whether per port authentication is in use. This includes username, password, privilege level, and list of power outlets controlled by that user, or console connections allowed from that port.
                       sysProductName 1.3.6.1.4.1.33.1.84
Displays the product name of this system.
                       sysModemPresent 1.3.6.1.4.1.33.1.85
Indicates whether this system has a built-in modem.
                       sysCauseAction 1.3.6.1.4.1.33.1.86
A control for toggling the cause action feature. Corresponds directly to the presence of Trigger/Action under the label Enabled Characteristics: in the SERVER CHARACTERISTICS display. The desired change will not take effect until the next system initialization.
                       sysWebServerConfigAdminStatus 1.3.6.1.4.1.33.1.87
A control for bring the web server up or down. Corresponds directly to the presence of Web Server under the label Enabled Characteristics: in the SERVER CHARACTERISTICS display.
                       sysTl1SourceIdentifier 1.3.6.1.4.1.33.1.88
The source identifier (SID) is the server name used by TL1 to identify the server.
                       sysInitializeDelayParameter 1.3.6.1.4.1.33.1.89
Control to begin the system initialization process providing that at least one parameter server is current. Corresponds directly to the INITIALIZE DELAY PARAMETER command. In response to a get-request or get-next-request, the agent always returns ready for this value.
                   xInternetDep 1.3.6.1.4.1.33.4
                   bridgeDep 1.3.6.1.4.1.33.5
                   xBootServer 1.3.6.1.4.1.33.6
                       xBsBasic 1.3.6.1.4.1.33.6.1
                           basicLogLimit 1.3.6.1.4.1.33.6.1.1
Maximum allowed number of kilobytes for recording events. Corresponds directly to MANAGER LOG FILE SIZE and the value labeled Log File Size: in the MANAGER CHARACTERISTICS display.
                           basicActiveLimit 1.3.6.1.4.1.33.6.1.2
Maximum allowed number of simultaneous service dialogs. Corresponds directly to MANAGER SIMULTANEOUS and the value labeled Maximum simultaneous requests: in the MANAGER CHARACTERISTICS display.
                           basicActiveNumber 1.3.6.1.4.1.33.6.1.3
Number of active service dialogs. Corresponds indirectly to the list of active clients in the MANAGER STATUS display.
                           basicClientNumber 1.3.6.1.4.1.33.6.1.4
Number of defined clients. Corresponds indirectly to the list of defined clients in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                           basicOffersSent 1.3.6.1.4.1.33.6.1.5
Total number of service offers sent in response to client requests. Corresponds directly to the value labeled Total service offers sent: in the MANAGER STATUS display.
                           basicEventTotal 1.3.6.1.4.1.33.6.1.6
Total number of events that have been written to the event log since it was last purged. This may be less than the number currently in the log. Corresponds directly to the value labeled Total Messages Logged: in the MANAGER EVENTS display.
                           basicEventPurge 1.3.6.1.4.1.33.6.1.7
Control to cause emptying the event log. In response to a get-request or get-next-request, the agent always returns ready for this value. Setting the value to ready has no effect. Setting it to execute causes the event log to immediately become empty. Corresponds directly to the PURGE MANAGER LOG FILE command.
                           activeTable 1.3.6.1.4.1.33.6.1.8
A list of active client dialog entries. The number of entries is given by basicActiveNumber.
                               activeEntry 1.3.6.1.4.1.33.6.1.8.1
Parameter values for an active client dialog entry.
                                   activeIdentificationType 1.3.6.1.4.1.33.6.1.8.1.1
The type of identification value in activeIdentification. Corresponds indirectly to the value labeled EthernetAddress in the MANAGER STATUS display.
                                   activeIdentification 1.3.6.1.4.1.33.6.1.8.1.2
Identification of the active partner. Corresponds directly to the value labeled EthernetAddress in the MANAGER STATUS display.
                                   activeFunction 1.3.6.1.4.1.33.6.1.8.1.3
The function the server is performing with the partner. Corresponds directly to the value labeled Function in the MANAGER STATUS display.
                                   activeSoftwareVersionType 1.3.6.1.4.1.33.6.1.8.1.4
If activeFunction is load, the software version being sent to the client, otherwise notApplicable. Corresponds to the letter in the software version labeled Version in the MANAGER STATUS display. alpha A: alpha test beta B: beta test production null: normal, production software special S: special, custom software diagnostic D: diagnostic, debug software
                                   activeSoftwareVersion 1.3.6.1.4.1.33.6.1.8.1.5
If activeFunction is load, the 4-byte software version being sent to the client, otherwise zero length. In order, the octets contain major version, minor version, ECO, and pre-release number. Corresponds to the numbers in the software version labeled Version in the MANAGER STATUS display. For example, the version display for activeSoftwareVersionType production and activeSoftwareVersion 2.2.0.0 is V2.2. The version display for activeSoftwareVersionType beta and activeSoftwareVersion 3.1.0.4 is V3.1B4.
                                   activeParameterVersion 1.3.6.1.4.1.33.6.1.8.1.6
If activeFunction is parameterStore, the parameter version being stored by the client, otherwise zero. Corresponds directly to the value labeled Version in the MANAGER STATUS display.
                                   activeCurrentSequence 1.3.6.1.4.1.33.6.1.8.1.7
The current dialog sequence number. Corresponds directly to the value labeled Seq in the MANAGER STATUS display.
                                   activeBytesRemaining 1.3.6.1.4.1.33.6.1.8.1.8
The number of bytes remaining to be transferred in the dialog. Corresponds directly to the value labeled Left in the MANAGER STATUS display.
                                   activeFile 1.3.6.1.4.1.33.6.1.8.1.9
The name of the file being used in the dialog. Corresponds directly to the value labeled File in the MANAGER STATUS display.
                                   activeStatus 1.3.6.1.4.1.33.6.1.8.1.10
The final status of the most recent attempt to get an image. Corresponds directly to the value labeled Get Status: in the DEVICE STATUS display.
                                   activeState 1.3.6.1.4.1.33.6.1.8.1.11
The dynamic state of an active attempt to get an image. Corresponds directly to the value labeled Get State: in the DEVICE STATUS display.
                           clientTable 1.3.6.1.4.1.33.6.1.9
A list of client data base entries. The number of entries is given by basicClientNumber.
                               clientEntry 1.3.6.1.4.1.33.6.1.9.1
Parameter values for a client data base entry.
                                   clientIdentificationType 1.3.6.1.4.1.33.6.1.9.1.1
The type of identification value in clientIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled Ethernet Address in the MANAGER NODE display or Ethernet Address, Device, and Global Devices or Local Devices in the MANAGER GLOBAL and LOCAL displays.
                                   clientIdentification 1.3.6.1.4.1.33.6.1.9.1.2
Identification of the client, either a hardware type or an Ethernet address, depending on clientIdentificationType. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled Ethernet Address in the MANAGER NODE display or Ethernet Address, Device, and Global Devices or Local Devices in the MANAGER GLOBAL and LOCAL displays.
                                   clientEntryStatus 1.3.6.1.4.1.33.6.1.9.1.3
The status of the entry. Set to invalid to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual removal of the entry is implementation specific.
                                   clientName 1.3.6.1.4.1.33.6.1.9.1.4
A name that may be used to identify the client. Corresponds directly to the value labeled Name in the MANAGER NODE display.
                                   clientLoadFile 1.3.6.1.4.1.33.6.1.9.1.5
The file with the clients load image. Corresponds directly to the value labeled Load File in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                                   clientDiagnosticFile 1.3.6.1.4.1.33.6.1.9.1.6
The file with the clients diagnostic test image. Corresponds directly to the value labeled Diag File in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                                   clientLoadService 1.3.6.1.4.1.33.6.1.9.1.7
Control for allowing load service for the client. Corresponds directly to the value labeled Load in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                                   clientDumpService 1.3.6.1.4.1.33.6.1.9.1.8
Control for allowing dump service for the client. Corresponds directly to the value labeled Dump in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                           namedTable 1.3.6.1.4.1.33.6.1.10
A list of named client data base entries. The number of entries is given by basicClientNumber.
                                 namedEntry 1.3.6.1.4.1.33.6.1.10.1
Parameter values for a named client data base entry.
                                     namedIdentificationType 1.3.6.1.4.1.33.6.1.10.1.1
The type of identification value in namedIdentification. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled Ethernet Address in the MANAGER NODE display or Ethernet Address, Device, and Global Devices or Local Devices in the MANAGER GLOBAL and LOCAL displays.
                                     namedIdentification 1.3.6.1.4.1.33.6.1.10.1.2
Identification of the client, either a hardware type or an Ethernet address, depending on namedIdentificationType. Corresponds directly to MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and the value labeled Ethernet Address in the MANAGER NODE display or Ethernet Address, Device, and Global Devices or Local Devices in the MANAGER GLOBAL and LOCAL displays.
                                     namedEntryStatus 1.3.6.1.4.1.33.6.1.10.1.3
The status of the entry. Set to invalid to remove the entry, which corresponds directly to the PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands. Actual removal of the entry is implementation specific.
                                     namedName 1.3.6.1.4.1.33.6.1.10.1.4
A name that may be used to identify the client. Corresponds directly to the value labeled Name in the MANAGER NODE display.
                                     namedLoadFile 1.3.6.1.4.1.33.6.1.10.1.5
The file with the clients load image. Corresponds directly to the value labeled Load File in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                                     namedDiagnosticFile 1.3.6.1.4.1.33.6.1.10.1.6
The file with the clients diagnostic test image. Corresponds directly to the value labeled Diag File in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                                     namedLoadService 1.3.6.1.4.1.33.6.1.10.1.7
Control for allowing load service for the client. Corresponds directly to the value labeled Load in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                                     namedDumpService 1.3.6.1.4.1.33.6.1.10.1.8
Control for allowing dump service for the client. Corresponds directly to the value labeled Dump in the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE displays.
                           xEventTable 1.3.6.1.4.1.33.6.1.11
A list of event entries. The number of entries is given by basicEventNumber.
                                 xEventEntry 1.3.6.1.4.1.33.6.1.11.1
Parameter values for a event entry.
                                     xEventIndex 1.3.6.1.4.1.33.6.1.11.1.1
In identification number for an event. The value 1 indicates the oldest event in the file, with subsequent numbers indicating sequential events. The event text for a given number may change as a circular event log wraps over its beginning. Corresponds directly to the relative position of an event in the MANAGER EVENTS display.
                                     xEventText 1.3.6.1.4.1.33.6.1.11.1.2
The text of the event, including date, time and other information. Corresponds directly to the individual event text in the MANAGER EVENTS display.
                           basicDeviceNumber 1.3.6.1.4.1.33.6.1.12
The systems number of mass-storage devices.
                           deviceTable 1.3.6.1.4.1.33.6.1.13
A list of device entries. The number of entries is given by basicDeviceNumber.
                                 deviceEntry 1.3.6.1.4.1.33.6.1.13.1
Parameter values for a device entry.
                                     deviceIndex 1.3.6.1.4.1.33.6.1.13.1.1
In identification number for a device, in the range 1 to basicDeviceNumber
                                     deviceName 1.3.6.1.4.1.33.6.1.13.1.2
A name by which the device is known in other displays, such as C1 or D2.
                                     deviceDescr 1.3.6.1.4.1.33.6.1.13.1.3
Details of the device type, including, for example, size, manufacturer, Flash versus RAM, and such. Corresponds directly to the value labeled Device Type: in the MANAGER DEVICE STATUS display.
                                     deviceOperation 1.3.6.1.4.1.33.6.1.13.1.4
Current operational state of the device. Corresponds directly the value labeled Device Operation: in the MANAGER DEVICE STATUS display.
                                     deviceFormat 1.3.6.1.4.1.33.6.1.13.1.5
Formatting status of the device. Corresponds directly the presence of one of the value labels under the label Device Status: in the MANAGER DEVICE STATUS display.
                                     deviceProtection 1.3.6.1.4.1.33.6.1.13.1.6
Write-protect status of the device. Corresponds directly the presence of one of the value labels under the label Device Status: in the MANAGER DEVICE STATUS display.
                                     deviceFormatMedium 1.3.6.1.4.1.33.6.1.13.1.7
Control to cause formatting of the medium in the device. In response to a get-request or get-next-request, the agent always returns ready for this value. Setting the value to ready has no effect. Setting it to execute causes the device to be formatted. Corresponds directly to the FORMAT DEVICE command.
                                     deviceGetFile 1.3.6.1.4.1.33.6.1.13.1.8
Control to cause getting a file to the device from a remote host system. In response to a get-request or get-next-request, the agent always returns ready for this value. Setting the value to ready has no effect. Setting it to execute causes the get to be attempted. Corresponds directly to the GET DEVICE command. When set to execute, the objects deviceGetFileHostIdentificationType, deviceGetFileHostIdentification, deviceGetFileName and deviceGetFileArea must be somewhere in the same set request message.
                                     deviceGetFileHostIdentificationType 1.3.6.1.4.1.33.6.1.13.1.9
The type of identification value in deviceIdentification. Corresponds indirectly to ADDRESS in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to execute. In response to a get-request or get-next-request, the value of this object is undefined.
                                     deviceGetFileHostIdentification 1.3.6.1.4.1.33.6.1.13.1.10
Identification of the host to get the file from, with type depending on deviceIdentificationType. Corresponds directly to ADDRESS in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to execute. In response to a get-request or get-next-request, the value of this object is zero length.
                                     deviceGetFileName 1.3.6.1.4.1.33.6.1.13.1.11
The name of the file to get. Corresponds directly to LOAD FILE in the GET DEVICE command. This object may not be set outside the context of setting deviceGetFile to execute. In response to a get-request or get-next-request, the value of this object is zero length.
                                     deviceGetFileArea 1.3.6.1.4.1.33.6.1.13.1.12
The area number in which to put the file. Corresponds directly to AREA in the GET DEVICE command. If it is not relevant to the particular device, it is ignored. This object may not be set outside the context of setting deviceGetFile to execute. In response to a get-request or get-next-request, the value of this object is zero.
                                     deviceFormatOption 1.3.6.1.4.1.33.6.1.13.1.13
Formatting option to apply. Corresponds directly to the OPTION in the FORMAT DEVICE command. This object may not be set outside the context of setting deviceFormatMedium to execute. In response to a get-request or get-next-request, the value of this object is zero.
                                     deviceFormatRedundantParams 1.3.6.1.4.1.33.6.1.13.1.14
Control for creating redundant parameter storage areas when formatting. Corresponds directly to NONREDUNDANT in the FORMAT DEVICE command. This object may not be set outside the context of setting deviceFormatMedium to execute. In response to a get-request or get-next-request, the value of this object is zero.
                                     devicePreviousStatus 1.3.6.1.4.1.33.6.1.13.1.15
Result of the immediately previous concluded boot dialog. Corresponds directly to the value labeled Get File Previous Status: in the SHOW CARD STATUS display.
                       xDump 1.3.6.1.4.1.33.6.2
                           dumpService 1.3.6.1.4.1.33.6.2.1
Control for allowing dump service for any client. Corresponds directly to DUMP and the value labeled Dump: in the MANAGER CHARACTERISTICS display.
                           dumpDrive 1.3.6.1.4.1.33.6.2.2
Identification number of the disk drive where dumps are stored. Corresponds directly to DUMP DRIVE and the value labeled Dump Drive: in the MANAGER CHARACTERISTICS display.
                           dumpMerit 1.3.6.1.4.1.33.6.2.3
Relative preference for this dump server over others. Corresponds directly to DUMP MERIT and the value labeled Dump Merit: in the MANAGER CHARACTERISTICS display.
                           dumpSize 1.3.6.1.4.1.33.6.2.4
Type of dump file to keep. Corresponds directly to DUMP SIZE and the value labeled Dump Size: in the MANAGER CHARACTERISTICS display.
                           dumpCompleted 1.3.6.1.4.1.33.6.2.5
The number of dumps completed since system initialization. Corresponds directly to the value labeled Dump Operations Completed: in the MANAGER STATUS display.
                           dumpActive 1.3.6.1.4.1.33.6.2.6
The number of dumps in progress. Corresponds directly to the value labeled Currently Dumping: in the MANAGER STATUS display.
                           dumpFileNumber 1.3.6.1.4.1.33.6.2.7
The number of dump files currently stored. Corresponds directly to the value labeled Network dump files and files in the MANAGER FILES display.
                           dumpFileTable 1.3.6.1.4.1.33.6.2.8
A list of dump file entries. The number of entries is given by dumpFileNumber.
                               dumpFileEntry 1.3.6.1.4.1.33.6.2.8.1
Parameter values for a dump file entry.
                                   dumpFileIdentificationType 1.3.6.1.4.1.33.6.2.8.1.1
The type of identification value in dumpFileIdentification. Corresponds indirectly to a file name part in the section labeled Network dump files in the MANAGER FILES display.
                                   dumpFileIdentification 1.3.6.1.4.1.33.6.2.8.1.2
Identification of the dump file, an Ethernet address, as indicated by dumpFileIdentificationType. Corresponds indirectly to a file name part in the section labeled Network dump files in the MANAGER FILES display.
                                   dumpFileEntryStatus 1.3.6.1.4.1.33.6.2.8.1.3
The status of the entry. Set to invalid to remove the entry, which corresponds indirectly to the PURGE MANAGER DUMP FILES command. Actual removal of the entry is implementation specific.
                                   dumpFileCreation 1.3.6.1.4.1.33.6.2.8.1.4
The time the dump file was created. Corresponds directly to a date and time in the section labeled Network dump files in the MANAGER FILES display.
                                   dumpFileSize 1.3.6.1.4.1.33.6.2.8.1.5
The number of bytes stored in the dump file. Corresponds directly to the value labeled bytes in the section labeled Network dump files in the MANAGER FILES display.
                       xLoad 1.3.6.1.4.1.33.6.3
                           loadService 1.3.6.1.4.1.33.6.3.1
Control for allowing load service for any client. Corresponds directly to LOAD and the value labeled Load: in the MANAGER CHARACTERISTICS display.
                           loadMerit 1.3.6.1.4.1.33.6.3.2
Relative preference for this load server over others. Corresponds directly to LOAD MERIT and the value labeled Load Merit: in the MANAGER CHARACTERISTICS display.
                           loadCompleted 1.3.6.1.4.1.33.6.3.3
The number of loads completed since system initialization. Corresponds directly to the value labeled Load Operations Completed: in the MANAGER STATUS display.
                           loadActive 1.3.6.1.4.1.33.6.3.4
The number of loads in progress. Corresponds directly to the value labeled Currently Loading: in the MANAGER STATUS display.
                           loadFileNumber 1.3.6.1.4.1.33.6.3.5
The number of load files currently stored. Corresponds directly to the value labeled Load image files and files in the MANAGER FILES display.
                           loadFileTable 1.3.6.1.4.1.33.6.3.6
A list of load file entries. The number of entries is given by loadFileNumber.
                               loadFileEntry 1.3.6.1.4.1.33.6.3.6.1
Parameter values for a load file entry.
                                   loadFileName 1.3.6.1.4.1.33.6.3.6.1.1
The name of a load file. Corresponds directly to a file name part in the section labeled Load image files in the MANAGER FILES display.
                                   loadFileCreation 1.3.6.1.4.1.33.6.3.6.1.2
The time the load file was created. Corresponds directly to a date and time in the section labeled Load image files in the MANAGER FILES display.
                                   loadFileSize 1.3.6.1.4.1.33.6.3.6.1.3
The number of bytes stored in the load file. Corresponds directly to the value labeled bytes in the section labeled Load image files in the MANAGER FILES display.
                                   loadFileSoftwareVersionType 1.3.6.1.4.1.33.6.3.6.1.4
The software version type of the image in the load file. Corresponds directly to a software version in the section labeled Load image files in the MANAGER FILES display. alpha A: alpha test beta B: beta test production null: normal, production software special S: special, custom software
                                   loadFileSoftwareVersion 1.3.6.1.4.1.33.6.3.6.1.5
The software version of the image in the load file. Corresponds directly to a software version in the section labeled Load image files in the MANAGER FILES display. For example, the version display for loadFileSoftwareVersionType production and loadFileSoftwareVersion 2.2.0.0 is V2.2. The version display for loadFileSoftwareVersionType beta and loadFileSoftwareVersion 3.1.0.4 is V3.1B4.
                       xParam 1.3.6.1.4.1.33.6.4
                           paramService 1.3.6.1.4.1.33.6.4.1
Control for allowing parameter storage service for any client. Corresponds directly to PARAMETER SERVICE and the value labeled Parameter Service: in the MANAGER CHARACTERISTICS display.
                           paramDefaultService 1.3.6.1.4.1.33.6.4.2
Control for allowing default parameter loading service for any client. Corresponds directly to PARAMETER DEFAULT SERVICE and the value labeled Parameter Default Service: in the MANAGER CHARACTERISTICS display.
                           paramDrive 1.3.6.1.4.1.33.6.4.3
Identification number of the disk drive where parameters are stored. Corresponds directly to PARAMETER DRIVE and the value labeled Parameter Drive: in the MANAGER CHARACTERISTICS display.
                           paramActive 1.3.6.1.4.1.33.6.4.4
The number of params in progress. Corresponds directly to the value labeled Currently Paraming: in the MANAGER STATUS display.
                           paramStorageActive 1.3.6.1.4.1.33.6.4.5
The number of parameter storage operations in progress. Corresponds directly to the value labeled Currently saving parameters: in the MANAGER STATUS display.
                           paramFileNumber 1.3.6.1.4.1.33.6.4.6
The number of parameter files currently stored. Corresponds directly to the value labeled Parameter files and files in the MANAGER FILES display.
                           paramFileTable 1.3.6.1.4.1.33.6.4.7
A list of param file entries. The number of entries is given by paramFileNumber.
                               paramFileEntry 1.3.6.1.4.1.33.6.4.7.1
Parameter values for a param file entry.
                                   paramFileIdentificationType 1.3.6.1.4.1.33.6.4.7.1.1
The type of identification value in paramFileIdentification. Corresponds indirectly to a file name part in the section labeled Parameter files in the MANAGER FILES display.
                                   paramFileIdentification 1.3.6.1.4.1.33.6.4.7.1.2
Identification of the param file, an Ethernet address, as indicated by paramFileIdentificationType. Corresponds indirectly to a file name part in the section labeled Parameter files in the MANAGER FILES display.
                                   paramFileEntryStatus 1.3.6.1.4.1.33.6.4.7.1.3
The status of the entry. Set to invalid to remove the entry, which corresponds indirectly to the PURGE MANAGER PARAMETER FILES command. Actual removal of the entry is implementation specific.
                                   paramFileWrite 1.3.6.1.4.1.33.6.4.7.1.4
The time the parameter file was last written. Corresponds directly to a date and time in the section labeled Parameter files in the MANAGER FILES display.
                                   paramFileSize 1.3.6.1.4.1.33.6.4.7.1.5
The number of bytes stored in the param file. Corresponds directly to the value labeled bytes in the section labeled Parameter files in the MANAGER FILES display.
                                   paramFileParameterVersion 1.3.6.1.4.1.33.6.4.7.1.6
The version number of the parameter data in the file. Corresponds directly to the value labeled ver in the section labeled Parameter files in the MANAGER FILES display.
                   xParamClient 1.3.6.1.4.1.33.7
                       paramClientLoaderName 1.3.6.1.4.1.33.7.1
The name of the system that most recently provided this systems stored parameters. Corresponds directly to the name value labeled Loaded From: in the PARAMETER SERVER display.
                       paramClientLoaderAddressType 1.3.6.1.4.1.33.7.2
The type of network address contained in paramClientLoaderAddress. unknown means no address has been defined. other means no other type value applies. local means there is no address and parameters were loaded from local storage. ip is an Internet IP address. ethernet is an 802.3 MAC address. Corresponds indirectly to the address value labeled Loaded From: in the PARAMETER SERVER display.
                       paramClientLoaderAddress 1.3.6.1.4.1.33.7.3
The network address of the system that most recently provided this systems stored parameters. Corresponds directly to the address value labeled Loaded From: in the PARAMETER SERVER display.
                       paramClientParameterVersion 1.3.6.1.4.1.33.7.4
The version number of the parameters as stored in this systems local memory. Corresponds directly to SERVER PARAMETER VERSION and the value labeled Last Update Version: in the PARAMETER SERVER display.
                       paramClientUpdateTime 1.3.6.1.4.1.33.7.5
This systems local date and time when it last attempted to store parameters with a parameter server. Corresponds directly to the values labeled Last Update Date: and Last Update Time: in the PARAMETER SERVER display.
                       paramClientServerCheck 1.3.6.1.4.1.33.7.6
Control over whether or not this system is allowed to check for additional parameter servers. enabled allows checking. Corresponds directly to PARAMETER SERVER CHECK and the presence of PARAMETER POLLING under the label Enabled Characteristics in the SERVER CHARACTERISTICS display.
                       paramClientCheckInterval 1.3.6.1.4.1.33.7.7
The number of minutes between checks for additional parameter servers. Corresponds directly to PARAMETER SERVER CHECK TIMER and the value labeled Check Timer: in the PARAMETER SERVER display.
                       paramClientCheckNow 1.3.6.1.4.1.33.7.8
Control to cause this system to immediately check for additional parameter servers. The agent always returns ready for this value. Setting the value to ready has no effect. Setting it to execute causes a check to be started. Corresponds to the CHECK PARAMETER SERVER command.
                       paramClientServerLimit 1.3.6.1.4.1.33.7.9
The maximum number of parameter servers this system is allowed to remember at the same time. Corresponds directly to PARAMETER SERVER LIMIT and the value labeled Parameter Server Limit: in the PARAMETER SERVER display.
                       paramClientRetransmitInterval 1.3.6.1.4.1.33.7.10
The number of minutes between this systems attempts to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to PARAMETER SERVER RETRANSMIT TIMER and the value labeled Retransmit Timer: in the PARAMETER SERVER display.
                       paramClientRetransmitLimit 1.3.6.1.4.1.33.7.11
The maximum number of attempts by this system to store new parameters with a server that has not acknowledged previous attempts. Corresponds directly to PARAMETER SERVER RETRANSMIT LIMIT and the value labeled Retransmit Limit: in the PARAMETER SERVER display.
                       paramClientState 1.3.6.1.4.1.33.7.12
This systems state with regard to update attempts. The value meanings are: other none of the following idle no update in progress internal internal state of no meaning to manager hold holding to keep from updating too often retry waiting to retry after failure Corresponds directly to the value labeled Storage State: in the PARAMETER SERVER display.
                       paramClientProtocolErrors 1.3.6.1.4.1.33.7.13
The number of invalid parameter service protocol messages received by this system. Corresponds directly to the value labeled Bad Parameter Messages: in the PARAMETER SERVER display.
                       paramClientServerRejects 1.3.6.1.4.1.33.7.14
The number of parameter servers this system rejected due to exceeding paramClientServerLimit. Corresponds directly to the value labeled Rejected Servers: in the PARAMETER SERVER display.
                       paramClientServerNumber 1.3.6.1.4.1.33.7.15
The number of parameter servers known to this system, indicating the number of entries in serverTable. Corresponds directly to the value labeled Parameter Servers: in the PARAMETER SERVER display.
                       paramServerTable 1.3.6.1.4.1.33.7.16
A list of parameter server entries. The number of entries is given by the value of paramClientServerNumber.
                             paramServerEntry 1.3.6.1.4.1.33.7.16.1
Status and parameter values for a parameter server.
                                 paramServerName 1.3.6.1.4.1.33.7.16.1.1
The servers name, unique within this system. Always 16 characters, null padded on the end. Corresponds directly to the name used to create the entry and the value labeled Name in the PARAMETER SERVER display.
                                 paramServerEntryStatus 1.3.6.1.4.1.33.7.16.1.2
The status of the entry. Set to invalid to remove the entry, which corresponds directly to the CLEAR/PURGE PARAMETER SERVER command. Actual removal of the entry is implementation specific.
                                 paramServerAddressType 1.3.6.1.4.1.33.7.16.1.3
The type of network address contained in paramServerAddress. unknown means no address has been defined. other means no other type value applies. local means there is no address and parameters were loaded from local storage. ip is an Internet IP address. ethernet is an 802.3 MAC address. Corresponds indirectly to the value labeled Address in the PARAMETER SERVER display.
                                 paramServerAddress 1.3.6.1.4.1.33.7.16.1.4
The servers network address. Corresponds directly to the value labeled Address in the PARAMETER SERVER display.
                                 paramServerStoredVersion 1.3.6.1.4.1.33.7.16.1.5
Parameter version number currently stored at the server. Corresponds directly to the value labeled Version in the PARAMETER SERVER display.
                                 paramServerStoredTime 1.3.6.1.4.1.33.7.16.1.6
The servers date and time when it stored the parameters of version paramServerStoredVersion. Corresponds directly to the value labeled Date in the PARAMETER SERVER display.
                                 paramServerStoredStatus 1.3.6.1.4.1.33.7.16.1.7
Status of this systems parameters with respect to the server. Corresponds directly to the value labeled Status in the PARAMETER SERVER display. The value meanings are: ahead server version newer than systems behind server version older than systems current up to date failed system no longer attempting update failing system trying to update but failing query attempting to determine version noMemCard no memory card in card drive unknown version not known
                                 paramServerStoredFailure 1.3.6.1.4.1.33.7.16.1.8
When paramServerStoredStatus is failed or failing, the reason for the most recent failure. Corresponds directly to the value labeled Reason in the PARAMETER SERVER display. The value meanings are: other none of the following none no failure protocolOut invalid protocol message to server open file open error at server read file read error at server write file write error at server resource resource lack at server (e.g. disk) protocolIn invalid protocol message from server response no response from server close file close error at server delete file delete error at server rename file rename error at server fileData bad parameter data stored at server
                       paramClientPath 1.3.6.1.4.1.33.7.17
The directory path to the parameter file on all servers. Corresponds directly to PARAMETER SERVER PATH and the value labeled Path: in the PARAMETER SERVER display.
                       paramClientChassisStorageState 1.3.6.1.4.1.33.7.18
The status of the current attempt to update parameters in local chassis storage. Corresponds directly to the value labeled Chassis Configuration:.
                       paramClientTftpBroadcast 1.3.6.1.4.1.33.7.20
Control over whether or not this system is allowed to send out a TFTP read broadcast after sending a BOOTP broadcast during the Parameter Check Function. enabled allows TFTP broadcast. Corresponds directly to the presence of PARAMETER TFTP BROADCAST under the label Enabled Characteristics in the SERVER CHARACTERISTICS display.
                       paramClientWriteNow 1.3.6.1.4.1.33.7.21
Control to start saving parameters immediately in response to an execute. Corresponds directly to the WRITE PARAMETERS command. In response to a get-request or get-next-request, the agent always returns ready for this value.
                   agent 1.3.6.1.4.1.33.8
                       terminalServer 1.3.6.1.4.1.33.8.1
                       bridge 1.3.6.1.4.1.33.8.3
                       repeater 1.3.6.1.4.1.33.8.4
                       bridgeRouter 1.3.6.1.4.1.33.8.5
                       bridgeRouterRepeater 1.3.6.1.4.1.33.8.7
                       switch 1.3.6.1.4.1.33.8.8
                       oem 1.3.6.1.4.1.33.8.9
                       nbase 1.3.6.1.4.1.33.8.10
                             nbaseSwitch 1.3.6.1.4.1.33.8.10.1
                                 nbaseSwitchN9 1.3.6.1.4.1.33.8.10.1.1
                   hubDeprecated 1.3.6.1.4.1.33.9
                   xInternet 1.3.6.1.4.1.33.10
                         xIp 1.3.6.1.4.1.33.10.1
                             ipGatewayAddress1 1.3.6.1.4.1.33.10.1.1
The internet address of the systems primary (first choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY GATEWAY ADDRESS and the value labeled Primary Gateway Address: in the SERVER INTERNET CHARACTERISTICS display.
                             ipGatewayAddress2 1.3.6.1.4.1.33.10.1.2
The internet address of the systems secondary (second choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECONDARY GATEWAY ADDRESS and the value labeled Secondary Gateway Address: in the SERVER INTERNET CHARACTERISTICS display.
                             ipAutoSubnetMask 1.3.6.1.4.1.33.10.1.3
A control for automatic determination of subnet mask. disabled indicates the system must use the mask as configured by the network manager. enabled indicates that the system is to automatically change the subnet mask when the systems Internet address is changed. Corresponds directly to SERVER INTERNET SUBNET MASK AUTOCONFIGURE and the value labeled Subnet Mask Autoconfigure: in the SERVER INTERNET CHARACTERISTICS display.
                             ipReassembly 1.3.6.1.4.1.33.10.1.4
A control for reassembly of IP fragments. Corresponds directly to SERVER INTERNET REASSEMBLY and the value labeled Reassembly: in the SERVER INTERNET CHARACTERISTICS display.
                             ipFragmentsQueuedHigh 1.3.6.1.4.1.33.10.1.5
Highest number of IP fragments queued.
                             ipFragmentsQueuedCurrent 1.3.6.1.4.1.33.10.1.6
Current number of IP fragments queued.
                             ipGenAdExtTable 1.3.6.1.4.1.33.10.1.7
Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the MIB-II ipAddrTable is created or deleted. Although MIB-II specifies the ipAddrTable as read-only, iTouch implementations typically implement it as read-write to support modification of local IP addresses, network masks, and such.
                                 ipGenAdExtEntry 1.3.6.1.4.1.33.10.1.7.1
A particular entry.
                                     ipGenAdEntExtType 1.3.6.1.4.1.33.10.1.7.1.1
The way this local IP address is used, which may imply alternate, more intuitive ways to set it. primary general purpose for ordinary use rotary identificaton for rotary selection slip use for SLIP connection ppp use for PPP connection
                                     ipGenAdEntExtBroadcast 1.3.6.1.4.1.33.10.1.7.1.2
Outgoing IP broadcast address associated with this local address. Value may be confined to logical compatibility with associated network mask.
                             ipARPTimeout 1.3.6.1.4.1.33.10.1.8
A control to set the length of time in minutes before an unused ARP entry is purged from the ARP table. The default is 60 minutes. Corresponds directly to the value labeled Translation Table TTL in the SERVER INTERNET CHARACTERISTICS display.
                             ipGatewayPingInterval 1.3.6.1.4.1.33.10.1.9
A control to set the interval of time in seconds between successive pings to the primary gateway so as to determine its status. The default is 60 seconds. Corresponds directly to the value labeled Gateway Timeout in the SERVER INTERNET CHARACTERISTICS display.
                             ipConfigureBootp 1.3.6.1.4.1.33.10.1.11
Control to use the BOOTP protocol upon startup to learn the units own internet address, subnet mask, primary and secondary gateway servers, domain name servers, time server and domain name.
                         xTcp 1.3.6.1.4.1.33.10.2
                             tcpPortTable 1.3.6.1.4.1.33.10.2.1
A list of TCP character port entries.
                                 tcpPortEntry 1.3.6.1.4.1.33.10.2.1.1
TCP parameter values for a character port.
                                     tcpPortIndex 1.3.6.1.4.1.33.10.2.1.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                                     tcpPortConnectByAddress 1.3.6.1.4.1.33.10.2.1.1.2
A control for requesting outgoing connection by internet address. disabled indicates outgoing connections must be by Domain name. enabled indicates that outgoing connections may be requested by internet address. Corresponds directly to PORT INTERNET CONNECTIONS and the presence of the label Internet Connections following the label Enabled Characteristics: in the PORT CHARACTERISTICS display.
                                     tcpPortWindowSize 1.3.6.1.4.1.33.10.2.1.1.3
Size of the TCP window for TCP connections on the port. Corresponds directly to PORT INTERNET TCP WINDOW SIZE and the value labeled TCP Window Size: in the PORT ALTERNATE CHARACTERISTICS display.
                                     tcpPortKeepAliveLimit 1.3.6.1.4.1.33.10.2.1.1.4
Number of minutes to maintain a TCP connection without response to keep-alive communication. A value of zero indicates no limit.
                             tcpResequencing 1.3.6.1.4.1.33.10.2.2
A control for keeping TCP messages received out-of-order to resequence them before using them. Corresponds directly to SERVER INTERNET TCP RESEQUENCING and the value labeled Resequencing: in the SERVER INTERNET CHARACTERISTICS display.
                             tcpQueuedSegs 1.3.6.1.4.1.33.10.2.3
Number of TCP segments in the TCP receive queues. Corresponds directly to the value labeled TCP Packets Queued: in the SERVER INTERNET COUNTERS display.
                             tcpDiscardSegs 1.3.6.1.4.1.33.10.2.4
Number of TCP segments discarded due to exceeding the TCP receive queue limit. Corresponds directly to the value labeled TCP Packets Discarded: in the SERVER INTERNET COUNTERS display.
                             tcpConnectTimer 1.3.6.1.4.1.33.10.2.5
Number of seconds to attempt a TCP connection without a response from the other side. The default value is 32 seconds. Corresponds directly to the SERVER INTERNET TCP CONNECT TIMER and the value labeled TCP Connect Timer in the SERVER INTERNET CHARACTERISTICS display
                             tcpLocalPortBase 1.3.6.1.4.1.33.10.2.6
The value for port 0s tcp source port number.
                             tcpLocalPortIncrement 1.3.6.1.4.1.33.10.2.7
The value by which the tcp source port number increases for each port greater than port 0.
                             tcpRoutingTblSz 1.3.6.1.4.1.33.10.2.8
A control to set the size of the working routing table. The default is the current size of the table (64).
                             tcpDataSendDelay 1.3.6.1.4.1.33.10.2.9
A control to delay for the specified number of 10 millisecond ticks before sending the userdata string over the telnet connection.
                             tcpAckDelay 1.3.6.1.4.1.33.10.2.10
A Control to prevent sending a TCP ACK when we we change TCP window size.
                             tcpRetransmitMin 1.3.6.1.4.1.33.10.2.11
Number of milliseconds for the initial TCP Retransmit timer. This is the time at which a TCP session will initially retransmit unacknowledged packets.
                         xSnmpAgent 1.3.6.1.4.1.33.10.3
                             snmpAgentGetCommunity 1.3.6.1.4.1.33.10.3.1
The SNMP community name allowed to perform get-requests or get-next requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the community name for these operations. Corresponds directly to SERVER INTERNET SNMP GET COMMUNITY and the value labeled Get Community: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                             snmpAgentSetCommunity 1.3.6.1.4.1.33.10.3.2
The SNMP community name allowed to perform set-requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the community name for these operations. Corresponds directly to SERVER INTERNET SNMP SET COMMUNITY and the value labeled Set Community: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                             snmpAgentTrapCommunity 1.3.6.1.4.1.33.10.3.3
The SNMP community name sent in traps from this agent. Use of this value preserves case. Corresponds directly to SERVER INTERNET SNMP TRAP COMMUNITY and the value labeled Trap Community: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                             snmpAgentGetClientNumber 1.3.6.1.4.1.33.10.3.4
The number of client source addresses allowed to perform get-requests or get-next requests to this agent. If the value is 0, the agent does not check source address for these operations. Corresponds indirectly to the values labeled Get Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                             snmpAgentSetClientNumber 1.3.6.1.4.1.33.10.3.5
The number of client source addresses allowed to perform set-requests to this agent. If the value is 0, the agent does not check source address for these operations. Corresponds indirectly to the values labeled Set Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                             snmpAgentTrapClientNumber 1.3.6.1.4.1.33.10.3.6
The number of client source addresses to which this agent sends traps. If the value is 0, the agent does not perform this operation. Corresponds indirectly to the values labeled Trap Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                             getClientTable 1.3.6.1.4.1.33.10.3.7
A list of get client entries. The number of entries is given by the value of snmpAgentGetClientNumber.
                                 getClientEntry 1.3.6.1.4.1.33.10.3.7.1
Parameter values for a get client.
                                     getClientIndex 1.3.6.1.4.1.33.10.3.7.1.1
Identification of a get client entry. Corresponds directly to the number in the label Get Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                                     getClientEntryStatus 1.3.6.1.4.1.33.10.3.7.1.2
Status of this entry. Setting the value to invalid invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
                                     getClientAddressType 1.3.6.1.4.1.33.10.3.7.1.3
The type of network address contained in getClientAddress. unknown means no address has been defined. other means no other type value applies. ip is an Internet IP address. ethernet is an 802.3 MAC address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is ip. Corresponds indirectly to the address value labeled Get Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                                     getClientAddress 1.3.6.1.4.1.33.10.3.7.1.4
The clients network address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is ip. Corresponds directly to the address value labeled Get Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                             setClientTable 1.3.6.1.4.1.33.10.3.8
A list of set client entries. The number of entries is given by the value of snmpAgentSetClientNumber.
                                 setClientEntry 1.3.6.1.4.1.33.10.3.8.1
Parameter values for a set client.
                                     setClientIndex 1.3.6.1.4.1.33.10.3.8.1.1
Identification of a set client entry. Corresponds directly to the number in the label Set Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                                     setClientEntryStatus 1.3.6.1.4.1.33.10.3.8.1.2
Status of this entry. Setting the value to invalid invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
                                     setClientAddressType 1.3.6.1.4.1.33.10.3.8.1.3
The type of network address contained in setClientAddress. unknown means no address has been defined. other means no other type value applies. ip is an Internet IP address. ethernet is an 802.3 MAC address. If setClientAddressType does not accompany setClientAddress in a set request, the default type is ip. Corresponds indirectly to the address value labeled Set Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                                     setClientAddress 1.3.6.1.4.1.33.10.3.8.1.4
The clients network address. When setting this value, the requester must supply setClientAddressType. If setClientAddressType does not accompany setClientAddress in a set request, the default type is ip. Corresponds directly to the address value labeled Set Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                             trapClientTable 1.3.6.1.4.1.33.10.3.9
A list of trap client entries. The number of entries is given by the value of snmpAgentTrapClientNumber.
                                 trapClientEntry 1.3.6.1.4.1.33.10.3.9.1
Parameter values for a trap client.
                                     trapClientIndex 1.3.6.1.4.1.33.10.3.9.1.1
Identification of a trap client entry. Corresponds directly to the number in the label Trap Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                                     trapClientEntryStatus 1.3.6.1.4.1.33.10.3.9.1.2
Status of this entry. Setting the value to invalid invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
                                     trapClientAddressType 1.3.6.1.4.1.33.10.3.9.1.3
The type of network address contained in trapClientAddress. unknown means no address has been defined. other means no other type value applies. ip is an Internet IP address. ethernet is an 802.3 MAC address. If trapClientAddressType does not accompany trapClientAddress in a set request, the default type is ip. Corresponds indirectly to the address value labeled Trap Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                                     trapClientAddress 1.3.6.1.4.1.33.10.3.9.1.4
The clients network address. When setting this value, the requester must supply trapClientAddressType. If trapClientAddressType does not accompany trapClientAddress in a set request, the default type is ip. Corresponds directly to the address value labeled Trap Client n: in the SERVER INTERNET SNMP CHARACTERISTICS display.
                             snmpAgentAuthFailureAddress 1.3.6.1.4.1.33.10.3.10
The address of the client to most recently fail SNMP authorization.
                             snmpAgentCommunityAuthenticationAlways 1.3.6.1.4.1.33.10.3.14
When enabled, indicates that community string authentication is done always for Gets, Sets, and GetNexts. When disabled, community string authentication is done once; but bypassed on subsequent Gets, Sets or GetNexts from the same address.
                         xDomainResolver 1.3.6.1.4.1.33.10.4
                             domainResolverSuffix 1.3.6.1.4.1.33.10.4.1
A partial domain name for the server to append to the end of an incomplete domain name provided by the user. Corresponds directly to SERVER INTERNET DEFAULT DOMAIN SUFFIX and the value labeled Domain Suffix: in the SERVER INTERNET CHARACTERISTICS display.
                             domainResolverAddress1 1.3.6.1.4.1.33.10.4.2
The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY DOMAIN ADDRESS and the value labeled Primary Domain Address: in the SERVER INTERNET CHARACTERISTICS display.
                             domainResolverAddress2 1.3.6.1.4.1.33.10.4.3
The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECONDARY DOMAIN ADDRESS and the value labeled Secondary Domain Address: in the SERVER INTERNET CHARACTERISTICS display.
                             domainResolverTtl 1.3.6.1.4.1.33.10.4.4
The number of hours to keep received Domain information. Corresponds directly to SERVER INTERNET DOMAIN TTL and the value labeled Domain TTL: in the SERVER INTERNET CHARACTERISTICS display.
                             domainResolverNameNumber 1.3.6.1.4.1.33.10.4.5
The number of Domain name mappings in this systems name cache.
                             nameTable 1.3.6.1.4.1.33.10.4.6
A list of Domain name entries. The number of entries is given by the value of domainResolverNameNumber.
                                 nameEntry 1.3.6.1.4.1.33.10.4.6.1
Parameter values for a Domain name.
                                     nameName 1.3.6.1.4.1.33.10.4.6.1.1
A fully qualified domain name. Corresponds directly to the value labeled Domain Name in the DOMAIN display.
                                     nameAddress 1.3.6.1.4.1.33.10.4.6.1.2
An Internet address corresponding to the Domain name. Corresponds directly to the value labeled Internet Address in the DOMAIN display.
                                     nameStatus 1.3.6.1.4.1.33.10.4.6.1.3
The status of the entry. Set to invalid to remove the entry, which corresponds directly to the PURGE DOMAIN command. Actual removal of the entry is implementation specific.
                                     nameSource 1.3.6.1.4.1.33.10.4.6.1.4
Source of this entry. The value meanings are: local defined by manager (LOCAL) primary obtained from a primary name server secondary obtained from a secondary name server rwho obtained from rwho Corresponds directly to the value labeled Source in the DOMAIN display.
                                     nameTtl 1.3.6.1.4.1.33.10.4.6.1.5
The number of minutes remaining in the entrys time to live. Corresponds directly to the value labeled TTL in the DOMAIN display.
                             domainResolverPpp 1.3.6.1.4.1.33.10.4.7
                                 domainResolverPppPrimaryServer 1.3.6.1.4.1.33.10.4.7.1
The internet address of the primary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the value labeled Primary WINS Address: in the SERVER INTERNET CHARACTERISTICS display.
                                 domainResolverPppSecondaryServer 1.3.6.1.4.1.33.10.4.7.2
The internet address of the secondary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the value labeled Secondary WINS Address: in the SERVER INTERNET CHARACTERISTICS display.
                         xSlip 1.3.6.1.4.1.33.10.5
                             slipTable 1.3.6.1.4.1.33.10.5.1
A list of SLIP character port entries.
                                 slipEntry 1.3.6.1.4.1.33.10.5.1.1
Parameter values for a SLIP port.
                                     slipIndex 1.3.6.1.4.1.33.10.5.1.1.1
An index value that uniquely identifies a port that can run SLIP. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                                     slipState 1.3.6.1.4.1.33.10.5.1.1.2
A control indicating whether SLIP is in operation on the port. Corresponds directly to PORT INTERNET SLIP and the value labeled SLIP in the PORT CHARACTERISTICS display.
                                     slipLocalAddress 1.3.6.1.4.1.33.10.5.1.1.3
The IP address assigned to the port. Corresponds directly to PORT SLIP ADDRESS and the value labeled SLIP Address: in the PORT ALTERNATE CHARACTERISTICS display.
                                     slipRemoteAddress 1.3.6.1.4.1.33.10.5.1.1.4
The IP address of the remote system attached to the port. Corresponds directly to PORT SLIP REMOTE and the value labeled Remote SLIP Address: in the PORT ALTERNATE CHARACTERISTICS display.
                                     slipMask 1.3.6.1.4.1.33.10.5.1.1.5
The subnet mask to use for SLIP operation on the port. Corresponds directly to PORT SLIP MASK and the value labeled SLIP Mask: in the PORT ALTERNATE CHARACTERISTICS display.
                                     slipPortPacketsReceived 1.3.6.1.4.1.33.10.5.1.1.6
The number of SLIP packets received from the port. Corresponds directly to the value labeled Serial Packets Received: in the PORT COUNTERS display.
                                     slipPortPacketsSent 1.3.6.1.4.1.33.10.5.1.1.7
The number of SLIP packets sent to the port. Corresponds directly to the value labeled Serial Packets Sent: in the PORT COUNTERS display.
                                     slipPortPacketsDiscarded 1.3.6.1.4.1.33.10.5.1.1.8
The number of SLIP packets received from the port and discarded. Corresponds directly to the value labeled Serial Packets Discarded: in the PORT COUNTERS display.
                                     slipPortPacketLengthErrors 1.3.6.1.4.1.33.10.5.1.1.9
The number of SLIP packets received from the port with an incorrect number of bytes. Corresponds directly to the value labeled Serial Packet Length Errors: in the PORT COUNTERS display.
                                     slipPortPacketChecksumErrors 1.3.6.1.4.1.33.10.5.1.1.10
The number of SLIP packets received from the port with an invalid checksum. Corresponds directly to the value labeled Serial Packet Checksum Errors: in the PORT COUNTERS display.
                                     slipNetworkPacketsReceived 1.3.6.1.4.1.33.10.5.1.1.11
The number of SLIP packets received from the network for this port. Corresponds directly to the value labeled Network Packets Received: in the PORT COUNTERS display.
                                     slipNetworkPacketsSent 1.3.6.1.4.1.33.10.5.1.1.12
The number of SLIP packets sent to the network from this port. Corresponds directly to the value labeled Network Packets Sent: in the PORT COUNTERS display.
                                     slipNetworkPacketsDiscarded 1.3.6.1.4.1.33.10.5.1.1.13
The number of SLIP packets received from the network for this port and discarded. Corresponds directly to the value labeled Network Packets Discarded: in the PORT COUNTERS display.
                         xTelnet 1.3.6.1.4.1.33.10.6
                             telnetPortTable 1.3.6.1.4.1.33.10.6.1
A list of Telnet character port entries.
                                 telnetPortEntry 1.3.6.1.4.1.33.10.6.1.1
Telnet parameter values for a character port.
                                     telnetPortIndex 1.3.6.1.4.1.33.10.6.1.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                                     telnetPortIncomingTcpPort 1.3.6.1.4.1.33.10.6.1.1.2
The TCP port number offered for incoming connections to this character port. Corresponds directly to PORT TELNET REMOTE PORT and the value labeled Remote Port: in the PORT TELNET CHARACTERISTICS display.
                                     telnetPortOutgoingTcpPort 1.3.6.1.4.1.33.10.6.1.1.3
The TCP port number used by default for outgoing connections from this character port. Corresponds directly to PORT TELNET DEFAULT PORT and the value labeled Default Port: in the PORT TELNET CHARACTERISTICS display.
                                     telnetPortNewlineTranslation 1.3.6.1.4.1.33.10.6.1.1.4
Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network, before sending the newline to the character port. The value indicates the sequence sent to the character port, with none meaning no translation. The lfToCrLf value converts the newline character LF received from the network to a CR/LF. Corresponds directly to PORT TELNET NEWLINE FILTERING and the value labeled Newline Filtering: in the PORT TELNET CHARACTERISTICS display.
                                     telnetPortTerminalType 1.3.6.1.4.1.33.10.6.1.1.5
The terminal type character string for Telnet negotiations. Corresponds directly to PORT TELNET TERMINALTYPE and the value labeled TerminalType: in the PORT TELNET CHARACTERISTICS display.
                                     telnetPortEorReflection 1.3.6.1.4.1.33.10.6.1.1.6
Control for end-of-record handshake. Corresponds directly to PORT TELNET EOR REFLECTION and the value labeled EOR Reflection: in the PORT TELNET CHARACTERISTICS display.
                                     telnetPortBinaryMode 1.3.6.1.4.1.33.10.6.1.1.7
Control for operation of Telnet binary mode. The value meanings are: disabled refuse binary mode negotiation (INTERACTIVE) flowControl pass all but XON and XOFF (PASTHRU) complete pass all characters (PASSALL) Corresponds directly to PORT TELNET BINARY SESSION MODE and the value labeled Binary Session Mode: in the PORT TELNET CHARACTERISTICS display.
                                     telnetPortSendLocation 1.3.6.1.4.1.33.10.6.1.1.8
A control indicating whether a Telnet session will initiate negotiation of the Send Location option. Corresponds directly to the PORT TELNET LOCATION and the value labeled Location in the PORT TELNET CHARACTERISTICS display.
                                     telnetPortClientLocation 1.3.6.1.4.1.33.10.6.1.1.9
The location of the Telnet client port. Corresponds directly to the value labeled Telnet Client Location in the SESSION display.
                                     telnetPortPassiveSendLocation 1.3.6.1.4.1.33.10.6.1.1.10
A control indicating whether a Telnet session will passively respond to negotiation of the Send Location option. When disabled and telnetPortSendLocation is disabled, we will refuse to negotiate this option. When telnetPortSendLocation is enabled, it takes precedence. Corresponds directly to the value labeled Passive Location in the PORT TELNET CHARACTERISTICS display.
                             telnetSerialPortTable 1.3.6.1.4.1.33.10.6.2
A list of Telnet character port entries.
                                 telnetSerialPortEntry 1.3.6.1.4.1.33.10.6.2.1
Telnet parameter values for a character port.
                                     telnetSerialPortIndex 1.3.6.1.4.1.33.10.6.2.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                                     telnetSerialPortOptionDisplay 1.3.6.1.4.1.33.10.6.2.1.2
Control for display of Telnet option negotiations. Corresponds directly to PORT TELNET OPTION DISPLAY and the value labeled Option Display: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortCsiEscape 1.3.6.1.4.1.33.10.6.2.1.3
Control for translation of 8-bit escape sequences received from the character port to 7-bit equivalents before transmission to the remote partner. Corresponds directly to PORT TELNET CSI ESCAPE and the value labeled CSI Escape: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortEchoMode 1.3.6.1.4.1.33.10.6.2.1.4
Control for who echoes characters that come from the character port. The value meanings are: local terminal server echoes locally remote remote system echoes disabled dont default to local echo passive dont initiate negotiating of echo character initiate remote echo and suppress go ahead line reject remote echo and reject suppress go ahead noecho will not initiate echo, but will negotiate it Corresponds directly to PORT TELNET ECHO MODE and the value labeled Echo Mode: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortNewlineMode 1.3.6.1.4.1.33.10.6.2.1.5
Translation to apply to newline (carriage return) received from the character port, before sending the newline to the remote partner. The correspondence to command keywords is crNull to NULL, crLF to LINEFEED, and verbatim to NOTHING (that is, no translation). Corresponds directly to PORT TELNET NEWLINE and the value labeled Newline: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortTransmitMode 1.3.6.1.4.1.33.10.6.2.1.6
Criterion for deciding to send to the remote partner characters received from the character port. Corresponds directly to PORT TELNET TRANSMIT and the value labeled Transmit: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortTransmitCharacterTimes 1.3.6.1.4.1.33.10.6.2.1.7
Number of character times to wait before transmitting when telnetSerialPortTransmitMode value is timed. Corresponds directly to PORT TELNET TRANSMIT IDLETIME and the value labeled Transmit: Idle Time - in the PORT TELNET CHARACTERISTICS display. This object may only be set to values 1..255. A value of 0 may be read if telnetSerialPortTransmitMode has a value of immediate or buffered
                                     telnetSerialPortAbortOutputCharacter 1.3.6.1.4.1.33.10.6.2.1.8
Character input from the character port to cause aborting output. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ABORT OUTPUT and the value labeled Abort Output Character: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortAttentionCharacter 1.3.6.1.4.1.33.10.6.2.1.9
Character input from the character port to cause an attention notification to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ATTENTION and the value labeled Attention Character: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortEraseKeyCharacter 1.3.6.1.4.1.33.10.6.2.1.10
Character input from the character port to cause erasure of the previous input character. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ERASE CHARACTER and the value labeled Erase Keystroke Character: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortEraseLineCharacter 1.3.6.1.4.1.33.10.6.2.1.11
Character input from the character port to cause erasure of the previous line of input. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ERASE LINE and the value labeled Erase Line Character: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortInterruptCharacter 1.3.6.1.4.1.33.10.6.2.1.12
Character input from the character port to cause sending an interrupt notification to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET INTERRUPT and the value labeled Interrupt Character: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortQueryCharacter 1.3.6.1.4.1.33.10.6.2.1.13
Character input from the character port to cause sending a status query to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET QUERY and the value labeled Query Character: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortSynchronizeCharacter 1.3.6.1.4.1.33.10.6.2.1.14
Character input from the character port to cause sending a synchronization attempt to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET SYNCHRONIZE and the value labeled Synchronize Character: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortUrgentBreak 1.3.6.1.4.1.33.10.6.2.1.15
Control for encoding breaks as Telnet urgent data. Corresponds directly to PORT TELNET URGENT BREAK and the value labeled Urgent Break: in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortRs491 1.3.6.1.4.1.33.10.6.2.1.16
A control to enable RS491 protocol processing on a port.
                                     telnetSerialPortTransmitBufferedTime 1.3.6.1.4.1.33.10.6.2.1.17
Number of milliseconds to wait before transmitting when telnetSerialPortTransmitMode value is timed. Corresponds directly to PORT TELNET TRANSMIT BUFFERED and the value labeled Transmit: Buff Time - in the PORT TELNET CHARACTERISTICS display. This object may only be set to values 30..1500. A value of 0 may be read if telnetSerialPortTransmitMode has a value of immediate, idletime or controlchar
                                     telnetSerialPortInterpretInterruptAsBreak 1.3.6.1.4.1.33.10.6.2.1.18
Control to interpret a Telnet Interrupt Character coming from the network as a Telnet Break Character, and to send a break out the serial port. This control is necessary for those devices which can send Telnet Interrupt but not Telnet Break. Corresponds directly to the presence of Telnet Interrupts Interpreted as Break under the label Enabled Characteristics in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortPass8d 1.3.6.1.4.1.33.10.6.2.1.19
Control to pass unaltered the hexadecimal character 8D. This control is added to ensure that this character will pass through directly in a session with 8-bit characters and parity odd or even. Corresponds directly to the presence of Telnet Pass 8D under the label Enabled Characteristics in the PORT TELNET CHARACTERISTICS display.
                                     telnetSerialPortComControlClient 1.3.6.1.4.1.33.10.6.2.1.20
Control to begin Telnet comport control option negotiations as a client when a Telnet session is initiated. The comport control option enables a port to do outbound modem dialing on a Telnet connection. Corresponds to the value labeled Client: in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.
                                     telnetSerialPortComControlServer 1.3.6.1.4.1.33.10.6.2.1.21
Control to begin Telnet comport control option negotiations as a server when a Telnet session is initiated. Corresponds to the value labeled Server: in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.
                                     telnetSerialPortComControlServerRaisesDtr 1.3.6.1.4.1.33.10.6.2.1.22
Control for the client to request that the server raises its DTR signal on the port at the begining of the Telnet connection. Corresponds to the value labeled Server Raises DTR: in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.
                                     telnetSerialPortComControlClientTogglesDtr 1.3.6.1.4.1.33.10.6.2.1.23
Control to respond to the servers notification that its DCD has come high (or low) by raising (or lowering) DTR accordingly on the local port. Corresponds to the value labeled Client Toggles DTR: in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display.
                         xTn3270 1.3.6.1.4.1.33.10.7
                             tn3270DeviceNumber 1.3.6.1.4.1.33.10.7.1
The number of entries in the tn3270 Device table.
                             tn3270LanguageNumber 1.3.6.1.4.1.33.10.7.2
The number of entries in the tn3270 Language table.
                             tn3270PortKeymapStatus 1.3.6.1.4.1.33.10.7.3
Control for individual ports to create their own keymaps. Corresponds directly to SERVER TN3270 PORT KEYMAPS and the value labeled Port Keymaps: in the SERVER TN3270 display.
                             tn3270DeviceTable 1.3.6.1.4.1.33.10.7.4
A list of tn3270 terminal device entries.
                                 tn3270DeviceEntry 1.3.6.1.4.1.33.10.7.4.1
Tn3270 parameter values for a terminal device entry.
                                     tn3270DeviceName 1.3.6.1.4.1.33.10.7.4.1.1
The name of a generic terminal device. Corresponds directly to SERVER TN3270 DEVICE and the value labeled Device Name: in the SERVER TN3270 DEVICE display.
                                     tn3270DeviceStatus 1.3.6.1.4.1.33.10.7.4.1.2
Status of this entry. Setting the value to invalid invalidates the entry, corresponding directly to the PURGE SERVER TN3270 DEVICE command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. If a new device table entry is added to the table, the agent will copy the VT100 table as a default. If one plans to add a new table entry, one should not remove the VT100 entry.
                                     tn3270DeviceType 1.3.6.1.4.1.33.10.7.4.1.3
The terminal type character string for use when tn3270DeviceTn3270Type is insufficient. Corresponds directly to SERVER TN3270 DEVICE TERMINALTYPE and the value labeled TerminalType: in the SERVER TN3270 DEVICE display.
                                     tn3270Device3278Model 1.3.6.1.4.1.33.10.7.4.1.4
The 3278 model for the device. Corresponds directly to SERVER TN3270 DEVICE 3278Model and the value labeled 3278Model: in the SERVER TN3270 DEVICE display.
                                     tn3270DeviceKeyNumber 1.3.6.1.4.1.33.10.7.4.1.5
The number of Key table entries for this device.
                                     tn3270DeviceScreenNumber 1.3.6.1.4.1.33.10.7.4.1.6
The number of Screen table entries for this device.
                             tn3270KeyTable 1.3.6.1.4.1.33.10.7.5
A list of tn3270 key entries by device.
                                 tn3270KeyEntry 1.3.6.1.4.1.33.10.7.5.1
Tn3270 parameter values for a key entry for a device.
                                     tn3270KeyDeviceName 1.3.6.1.4.1.33.10.7.5.1.1
The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled Device Name: in the SERVER TN3270 DEVICE display.
                                     tn3270KeyName 1.3.6.1.4.1.33.10.7.5.1.2
The key name to which this entry applies. Corresponds directly to the key portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 3270-key in the Keymap: section of the SERVER TN3270 DEVICE display.
                                     tn3270KeyStatus 1.3.6.1.4.1.33.10.7.5.1.3
Status of this entry. Setting the value to invalid invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
                                     tn3270KeyCharacterSequence 1.3.6.1.4.1.33.10.7.5.1.4
The ASCII character sequence for the key. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE KEYMAP and the value labeled KeyCode in the Keymap: section of the SERVER TN3270 DEVICE display.
                                     tn3270KeyDescription 1.3.6.1.4.1.33.10.7.5.1.5
Descriptive text for the key. Corresponds directly to the description portion of SERVER TN3270 DEVICE KEYMAP and the value labeled Description in the SERVER TN3270 DEVICE display.
                             tn3270ScreenTable 1.3.6.1.4.1.33.10.7.6
A list of tn3270 screen action entries by device.
                                 tn3270ScreenEntry 1.3.6.1.4.1.33.10.7.6.1
Tn3270 parameter values for a screen action entry for a device.
                                     tn3270ScreenDeviceName 1.3.6.1.4.1.33.10.7.6.1.1
The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled Device Name: in the SERVER TN3270 DEVICE display.
                                     tn3270ScreenActionName 1.3.6.1.4.1.33.10.7.6.1.2
The screen action to which this entry applies. Corresponds directly to the action portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled Terminal Function in the Screenmap: section of the SERVER TN3270 DEVICE display.
                                     tn3270ScreenStatus 1.3.6.1.4.1.33.10.7.6.1.3
Status of this entry. Setting the value to invalid invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
                                     tn3270ScreenCharacterSequence 1.3.6.1.4.1.33.10.7.6.1.4
The ASCII character sequence for the screen action. Some actions may have a lesser length limit. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled HexCode in the Screenmap: section of the SERVER TN3270 DEVICE display.
                             tn3270LanguageTable 1.3.6.1.4.1.33.10.7.7
A list of tn3270 language entries.
                                 tn3270LanguageEntry 1.3.6.1.4.1.33.10.7.7.1
Tn3270 parameter values for a language entry.
                                     tn3270LanguageName 1.3.6.1.4.1.33.10.7.7.1.1
The name of language for character translation tables. Corresponds directly to SERVER TN3270 LANGUAGE and the value labeled Language Name: in the SERVER LANGUAGE display.
                                     tn3270LanguageStatus 1.3.6.1.4.1.33.10.7.7.1.2
Status of this entry. Setting the value to invalid invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. If a new device table entry is added to the table, the agent will copy the USENGLSH table as the default.
                             eToALanguageTable 1.3.6.1.4.1.33.10.7.8
A list of language EBCDIC to ASCII conversion entries.
                                 eToALanguageEntry 1.3.6.1.4.1.33.10.7.8.1
EBCDIC to ASCII parameter values for a language entry.
                                     eToALanguageName 1.3.6.1.4.1.33.10.7.8.1.1
The name of language from the language table.
                                     eToAOffset 1.3.6.1.4.1.33.10.7.8.1.2
EBCDIC character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LANGUAGE and the hexadecimal labels around the conversion table labeled EBCDIC to ASCII in the SERVER LANGUAGE display.
                                     eToAValue 1.3.6.1.4.1.33.10.7.8.1.3
ASCII character value for the EBCDIC offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled EBCDIC to ASCII in the SERVER LANGUAGE display.
                             aToELanguageTable 1.3.6.1.4.1.33.10.7.9
A list of language ASCII to EBCDIC conversion entries.
                                 aToELanguageEntry 1.3.6.1.4.1.33.10.7.9.1
ASCII to EBCDIC parameter values for a language entry.
                                     aToELanguageName 1.3.6.1.4.1.33.10.7.9.1.1
The name of language from the language table.
                                     aToEOffset 1.3.6.1.4.1.33.10.7.9.1.2
ASCII character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LANGUAGE and the hexadecimal labels around the conversion table labeled ASCII to EBCDIC in the SERVER LANGUAGE display.
                                     aToEValue 1.3.6.1.4.1.33.10.7.9.1.3
EBCDIC character value for the ASCII offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled ASCII to EBCDIC in the SERVER LANGUAGE display.
                             tn3270PortTable 1.3.6.1.4.1.33.10.7.10
A list of tn3270 character port entries.
                                   tn3270PortEntry 1.3.6.1.4.1.33.10.7.10.1
Parameter values for a tn3270 port.
                                       tn3270PortIndex 1.3.6.1.4.1.33.10.7.10.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                                       tn3270PortDeviceName 1.3.6.1.4.1.33.10.7.10.1.2
The name of a generic terminal device from the tn3270 device table. Corresponds directly to PORT TELNET TN3270 DEVICE and the value labeled Tn3270 Device: in the PORT TELNET display.
                                       tn3270PortLanguageName 1.3.6.1.4.1.33.10.7.10.1.3
The name of language from the tn3270 language table. Corresponds directly to PORT TELNET TN3270 LANGUAGE and the value labeled Tn3270 Language: in the PORT TELNET display.
                                       tn3270PortExtendedAttributes 1.3.6.1.4.1.33.10.7.10.1.4
A control indicating that certain 3270 extended attributes are supported on the port. Corresponds directly to PORT TELNET TN3270 XTDATTRS and the label Tn3270 XtdAttrs following the label Enabled Characteristics in the PORT TELNET display.
                                       tn3270PortEorNegotiation 1.3.6.1.4.1.33.10.7.10.1.5
A control for negotiation of the Telnet EOR option when establishing a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 EOR and the label Tn3270 EOR following the label Enabled Characteristics in the PORT TELNET display.
                                       tn3270PortErrorLock 1.3.6.1.4.1.33.10.7.10.1.6
A control for requiring use the RESET key when the host reports an error during a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 ERRORLOCK and the label Tn3270 ErrorLock following the label Enabled Characteristics in the PORT TELNET display.
                                       tn3270PortPrinterPort 1.3.6.1.4.1.33.10.7.10.1.7
The port number of the tn3270 printer. Corresponds directly to PORT TELNET TN3270 PRINTER and the value labeled Tn3270 Printer: in the PORT TELNET display.
                                       tn3270PortOutgoingTcpPort 1.3.6.1.4.1.33.10.7.10.1.8
The TCP port which is used for a TN3270 session when connecting to a remote host from this serial port. Corresponds directly to the value labeled Tn3270 Default Port: in the PORT TELNET CHARACTERISTICS display.
                                       tn3270PortSpaceInsert 1.3.6.1.4.1.33.10.7.10.1.9
Control to allow insert mode within a space filled field, and write characters over EBCDIC spaces. Corresponds directly to the presence of Tn3270 Space_Insert under the label Enabled Characteristics in the PORT TELNET CHARACTERISTICS display.
                                       tn3270PortTypeAhead 1.3.6.1.4.1.33.10.7.10.1.10
Control to permit typing ahead in a tn3270 session prior to receiving a response from the host for the previous command entered. Corresponds directly to the presence of Tn3270 TypeAhead under the label Enabled Characteristics in the PORT TELNET CHARACTERISTICS display.
                                       tn3270PrefixKeyMap 1.3.6.1.4.1.33.10.7.10.1.11
Control to prepend a prefix function to another function key. When the operator hits the key the prepended function(s) and then the main function for the key are transmitted to the host. Corresponds directly to the presence of Tn3270 PrefixKeyMap under the label Enabled Characteristics in the PORT TELNET CHARACTERISTICS display.
                                       tn3270PortScanner 1.3.6.1.4.1.33.10.7.10.1.12
Indicates that this is a tn3270 scanner port. Corresponds directly to the presence of Tn3270 SCANNER under the label Enabled Characteristics in the PORT TELNET CHARACTERISTICS display.
                         xKerberos 1.3.6.1.4.1.33.10.8
                             kerbStatus 1.3.6.1.4.1.33.10.8.1
A control indicating the level of Kerberos operation on the system. Corresponds directly to SERVER KERBEROS STATUS and the value labeled Kerberos Security: in the SERVER KERBEROS display.
                             kerbRealm 1.3.6.1.4.1.33.10.8.2
The Kerberos realm with which the kerbServerName1 and kerbServerName2 are associated. Corresponds directly to SERVER KERBEROS REALM and the value labeled Kerberos Realm: in the SERVER KERBEROS display.
                             kerbQueryLimit 1.3.6.1.4.1.33.10.8.3
The maximum number of attempts the system can make when trying to verify a Kerberos ID. Corresponds directly to SERVER KERBEROS QUERY LIMIT and the value labeled Kerberos Query Limit: in the SERVER KERBEROS display.
                             kerbMasterName 1.3.6.1.4.1.33.10.8.4
The Domain name of the Kerberos master host system, which holds the Kerberos database. Corresponds directly to SERVER KERBEROS MASTER and the value labeled Kerberos Master: in the SERVER KERBEROS display.
                             kerbServerName1 1.3.6.1.4.1.33.10.8.5
The Domain name of the first Kerberos server to try when the system verifys a Kerberos ID. Corresponds directly to SERVER KERBEROS PRIMARY SERVER and the value labeled Kerberos Primary Server: in the SERVER KERBEROS display.
                             kerbServerName2 1.3.6.1.4.1.33.10.8.6
The Domain name of the Kerberos server to try when the system verifys a Kerberos ID and cannot reach the Kerberos primary server. Corresponds directly to SERVER KERBEROS SECONDARY SERVER and the value labeled Kerberos Secondary Server: in the SERVER KERBEROS display.
                             kerbInsecureLogins 1.3.6.1.4.1.33.10.8.7
The number of user logins on ports for which Kerberos user verification is not enabled. Corresponds directly to the value labeled Logins without Kerberos: in the SERVER KERBEROS display.
                             kerbSecureLogins 1.3.6.1.4.1.33.10.8.8
The number of successful user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled Successful Logins: in the SERVER KERBEROS display.
                             kerbSecureLoginsFailed 1.3.6.1.4.1.33.10.8.9
The number of verification failures due to incorrect ID or password for attempted user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled Unsuccessful Logins: in the SERVER KERBEROS display.
                             kerbPasswordChangeFailed 1.3.6.1.4.1.33.10.8.10
The number of user failures to change their Kerberos password due to invalid old password or new password verification. Corresponds directly to the value labeled Password Change Failures: in the SERVER KERBEROS display.
                             kerbError 1.3.6.1.4.1.33.10.8.11
The error number of the most recent Kerberos-related failure. Corresponds directly to the value labeled Last Kerberos Error: in the SERVER KERBEROS display. For a list of error numbers and their meanings, consult relevant iTouch or Kerberos documentation.
                             kerbErrorTime 1.3.6.1.4.1.33.10.8.12
The date and time that kerbError was last updated. Corresponds directly to the value labeled Occurred: in the SERVER KERBEROS display.
                             kerbMasterAccess 1.3.6.1.4.1.33.10.8.13
The number of times the system successfully accessed the Kerberos master host. Corresponds directly to the value labeled Attempts to access:, Master, and Successful: in the SERVER KERBEROS display.
                             kerbMasterAccessFailed 1.3.6.1.4.1.33.10.8.14
The number of times the system failed access to the Kerberos master host. Corresponds directly to the value labeled Attempts to access:, Master, and Unsuccessful: in the SERVER KERBEROS display.
                             kerbServerAccess1 1.3.6.1.4.1.33.10.8.15
The number of times the system successfully accessed the Kerberos primary server. Corresponds directly to the value labeled Attempts to access:, Server1, and Successful: in the SERVER KERBEROS display.
                             kerbServerAccessFailed1 1.3.6.1.4.1.33.10.8.16
The number of times the system failed access to the Kerberos primary server. Corresponds directly to the value labeled Attempts to access:, Server1, and Unsuccessful: in the SERVER KERBEROS display.
                             kerbServerAccess2 1.3.6.1.4.1.33.10.8.17
The number of times the system successfully accessed the Kerberos secondary server. Corresponds directly to the value labeled Attempts to access:, Server2, and Successful: in the SERVER KERBEROS display.
                             kerbServerAccessFailed2 1.3.6.1.4.1.33.10.8.18
The number of times the system failed access to the Kerberos secondary server. Corresponds directly to the value labeled Attempts to access:, Server2, and Unsuccessful: in the SERVER KERBEROS display.
                             kerbPortTable 1.3.6.1.4.1.33.10.8.19
A list of Kerberos character port entries.
                                   kerbPortEntry 1.3.6.1.4.1.33.10.8.19.1
Parameter values for a Kerberos port.
                                       kerbPortIndex 1.3.6.1.4.1.33.10.8.19.1.1
An index value that uniquely identifies a port could relate to Kerberos. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                                       kerbPortStatus 1.3.6.1.4.1.33.10.8.19.1.2
A control indicating the level of Kerberos operation on the port. Corresponds directly to PORT KERBEROS and the value Kerberos following the label Enabled Characteristics in the PORT CHARACTERISTICS display.
                             kerbServerPort 1.3.6.1.4.1.33.10.8.20
The UDP port number on the Kerberos server where Kerberos messages are sent.
                         xPortSecurity 1.3.6.1.4.1.33.10.9
                             psEntryNumber 1.3.6.1.4.1.33.10.9.1
The number of security entries in this systems port security table with psEntryStatus of valid.
                             psEntryNumberLimit 1.3.6.1.4.1.33.10.9.2
The maximum number of security entries in this systems port security table.
                             psEntryInvalidIndex 1.3.6.1.4.1.33.10.9.3
A value of psEntryIndex for an entry that has psEntryStatus of invalid. A management station may choose this value when adding a new entry. Collisions between independent management stations simultaneously using the same number are beyond the scope of this document.
                             psPortTable 1.3.6.1.4.1.33.10.9.4
A list of port security character port entries.
                                 psPortEntry 1.3.6.1.4.1.33.10.9.4.1
Port security parameter values for a port.
                                     psPortIndex 1.3.6.1.4.1.33.10.9.4.1.1
An index value that uniquely identifies a port for security purposes. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                                     psPortDefaultInboundAccess 1.3.6.1.4.1.33.10.9.4.1.2
The default access to the port for incoming TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT INBOUND and the value labeled Inbound Default: in the PORT INTERNET SECURITY display.
                                     psPortDefaultOutboundAccess 1.3.6.1.4.1.33.10.9.4.1.3
The default access to the port for outgoing TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT OUTBOUND and the value labeled Outbound Default: in the PORT INTERNET SECURITY display.
                                     psClrInternetSecurity 1.3.6.1.4.1.33.10.9.4.1.4
A control for if the internet security entries for this port will be cleared upon port logout. The default is disabled.
                             psTable 1.3.6.1.4.1.33.10.9.5
A list of port security entries.
                                 psEntry 1.3.6.1.4.1.33.10.9.5.1
Port security parameter values for an entry for a port.
                                     psEntryIndex 1.3.6.1.4.1.33.10.9.5.1.1
A small, numeric distinguisher for port security entries. When adding a new entry, the client should specify an unused value, such as psEntryInvalidIndex. Corresponds directly to the value labeled Entry in the SERVER INTERNET SECURITY display.
                                     psEntryStatus 1.3.6.1.4.1.33.10.9.5.1.2
Status of this entry. Setting the value to invalid invalidates the entry, corresponding directly to the CLEAR INTERNET SECURITY command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Setting this object to valid has no effect. When creating a new instance, one must set psEntryAddress, psEntryMask, psEntryAccess, psEntryDirection and psEntryPortList for the new instance in the same physical set request. Furthermore, if one wishes to change an entry, one must first delete it and then add it with its new values.
                                     psEntryAddress 1.3.6.1.4.1.33.10.9.5.1.3
The IP address to which the entry pertains. Corresponds directly to the PORT INTERNET SECURITY internet address and the value labeled Internet Address in the SERVER INTERNET SECURITY display.
                                     psEntryMask 1.3.6.1.4.1.33.10.9.5.1.4
The mask applied to psEntryAddress when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY MASK and the value labeled Security Mask in the SERVER INTERNET SECURITY display.
                                     psEntryAccess 1.3.6.1.4.1.33.10.9.5.1.5
The access to the port for TCP connections when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY ALLOW or DENY and the value labeled Access in the SERVER INTERNET SECURITY display.
                                     psEntryDirection 1.3.6.1.4.1.33.10.9.5.1.6
The direction of TCP connections to which this entry applies. Corresponds directly to PORT INTERNET SECURITY INBOUND or OUTBOUND and the value labeled Direction in the SERVER INTERNET SECURITY display.
                                     psEntryPortMap 1.3.6.1.4.1.33.10.9.5.1.7
The list of character ports to which this entry applies. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Proposed Standard Internet Character MIB. Corresponding bit numbers start with 1 as the high-order bit of the first octet. Corresponds directly to PORT INTERNET SECURITY and the value labeled Ports in the SERVER INTERNET SECURITY display.
                         xXremote 1.3.6.1.4.1.33.10.10
                               xremoteServerName1 1.3.6.1.4.1.33.10.10.1
The Domain name of the first XREMOTE font server to try for downloading fonts. Corresponds directly to SERVER XREMOTE PRIMARY SERVER and the value labeled Xremote Primary Font Server: in the SERVER XREMOTE display.
                               xremoteServerName2 1.3.6.1.4.1.33.10.10.2
The Domain name of the XREMOTE font server to try for downloading fonts and the primary font server does not respond. Corresponds directly to SERVER XREMOTE SECONDARY SERVER and the value labeled Xremote Secondary Font Server: in the SERVER XREMOTE display.
                               xremoteServerAccess1 1.3.6.1.4.1.33.10.10.3
The number of times the system successfully accessed the XREMOTE primary font server. Corresponds directly to the value labeled Attempts to access:, Server1, and Successful: in the SERVER XREMOTE display.
                               xremoteServerAccessFailed1 1.3.6.1.4.1.33.10.10.4
The number of times the system failed access to the XREMOTE primary font server. Corresponds directly to the value labeled Attempts to access:, Server1, and Unsuccessful: in the SERVER XREMOTE display.
                               xremoteServerAccess2 1.3.6.1.4.1.33.10.10.5
The number of times the system successfully accessed the XREMOTE secondary font server. Corresponds directly to the value labeled Attempts to access:, Server2, and Successful: in the SERVER XREMOTE display.
                               xremoteServerAccessFailed2 1.3.6.1.4.1.33.10.10.6
The number of times the system failed access to the XREMOTE secondary font server. Corresponds directly to the value labeled Attempts to access:, Server2, and Unsuccessful: in the SERVER XREMOTE display.
                               xremoteSessions 1.3.6.1.4.1.33.10.10.7
The number of connected XREMOTE sessions. Corresponds directly to the value labeled Current Number of Xremote Sessions: in the SERVER XREMOTE display.
                               xremotePortTable 1.3.6.1.4.1.33.10.10.8
A list of XREMOTE character port entries.
                                   xremotePortEntry 1.3.6.1.4.1.33.10.10.8.1
XREMOTE parameter values for a port.
                                       xremotePortIndex 1.3.6.1.4.1.33.10.10.8.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                                       xremotePortXremote 1.3.6.1.4.1.33.10.10.8.1.2
Control for use of XREMOTE on the port. Corresponds directly to PORT XREMOTE and the presence of the label Xremote following the label Enabled Characteristics: in the PORT CHARACTERISTICS display.
                                       xremotePortXdmQuery 1.3.6.1.4.1.33.10.10.8.1.3
The type of query message issued by a port when searching for an X Display Manager (XDM). Corresponds directly to the PORT XDM QUERY and the XDM Query: in the PORT ALTERNATE CHARACTERISTICS display
                                       xremotePortXdmHost 1.3.6.1.4.1.33.10.10.8.1.4
The Domain name or Internet address of the X Display Manager (XDM) for a port. Corresponds directly to the PORT XDM HOST and the XDM Host: in the PORT ALTERNATE CHARACTERISTICS display
                               xremoteServerClients 1.3.6.1.4.1.33.10.10.9
The number of active X clients. Corresponds directly to the value labeled Current Number of XClients: in the SERVER XREMOTE display.
                         xRotary 1.3.6.1.4.1.33.10.11
                               rotaryNumber 1.3.6.1.4.1.33.10.11.1
The number of entries in the Rotary table.
                               rotaryTable 1.3.6.1.4.1.33.10.11.2
A list of rotary entries.
                                   rotaryEntry 1.3.6.1.4.1.33.10.11.2.1
Parameter values for a rotary.
                                       rotaryAddress 1.3.6.1.4.1.33.10.11.2.1.1
The internet address to be recognized as a rotary. Corresponds directly to the ip-address portion of SERVER INTERNET ROTARY and the value labeled Internet Address in the SERVER INTERNET ROTARY display.
                                       rotaryStatus 1.3.6.1.4.1.33.10.11.2.1.2
Status of this entry. Setting the value to invalid invalidates the entry, corresponding directly to the CLEAR SERVER INTERNET ROTARY command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Setting the value to valid in conjunction with a new rotaryAddress will add a new entry to the table. When adding a new entry, one should also specify a rotaryPortMap as the DEFVAL of 0..0 for rotaryPortMap is meaningless.
                                       rotaryPortMap 1.3.6.1.4.1.33.10.11.2.1.3
The list of character ports that compose the rotary. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Proposed Standard Internet Character MIB. Corresponding bit numbers start with 1 as the high-order bit of the first octet. Corresponds directly to port-list portion of SERVER INTERNET ROTARY and the value labeled Ports in the SERVER INTERNET ROTARY display.
                         xEgp 1.3.6.1.4.1.33.10.12
                               egpRouting 1.3.6.1.4.1.33.10.12.1
Control for EGP routing services.
                               egpStatus 1.3.6.1.4.1.33.10.12.2
Status of the EGP routing services indicating why it is not running.
                               egpNbrTable 1.3.6.1.4.1.33.10.12.3
The EGP neighbor table.
                                   egpNbrEntry 1.3.6.1.4.1.33.10.12.3.1
Information about this entitys relationship with a particular EGP neighbor.
                                       egpNbrAddr 1.3.6.1.4.1.33.10.12.3.1.1
The IP address of this entrys EGP neighbor.
                                       egpNbrIntervalDead 1.3.6.1.4.1.33.10.12.3.1.2
The interval upon entering the cease or idle state before automatically assuming a Start Event has occured. If a neighbor does not respond within 5 minutes, a Stop Event will automatically occur. The interval is in hundredths of seconds.
                                       egpNbrStatus 1.3.6.1.4.1.33.10.12.3.1.3
The status of the entry for this neighbor. Set to invalid to remove the entry.
                         xOspf 1.3.6.1.4.1.33.10.13
                               ospfAutoConfigure 1.3.6.1.4.1.33.10.13.1
Control whether OSPF will automatically configure itself.
                               ospfStatus 1.3.6.1.4.1.33.10.13.2
Status of the OSPF routing services indicating why it is not running.
                               ospfIfMtrcTable 1.3.6.1.4.1.33.10.13.3
The TOS metrics for a non-virtual interface identified by the interface index.
                                   ospfIfMtrcEntry 1.3.6.1.4.1.33.10.13.3.1
A particular TOS metric for a non-virtual interface identified by the interface index.
                                       ospfIfMtrcIpAddress 1.3.6.1.4.1.33.10.13.3.1.1
Same as ospfIfMetricIpAddress in OSPF MIB, the IP address of this OSPF interface.
                                       ospfIfMtrcAddressLessIf 1.3.6.1.4.1.33.10.13.3.1.2
Same as ospfIfMetricAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for interfaces having no IP Address.
                                       ospfIfMtrcTos 1.3.6.1.4.1.33.10.13.3.1.3
Same as ospfIfMetricTOS in OSPF MIB, the type of service metric being referenced.
                                       ospfIfMtrcCostActual 1.3.6.1.4.1.33.10.13.3.1.4
The actual cost of the metric in case it was set to auto.
                               ospfXIfTable 1.3.6.1.4.1.33.10.13.4
The TOS metrics for a non-virtual interface identified by the interface index.
                                   ospfXIfEntry 1.3.6.1.4.1.33.10.13.4.1
Interface parameters for OSPF.
                                       ospfXIfIpAddress 1.3.6.1.4.1.33.10.13.4.1.1
Same as ospfIfIpAddress in OSPF MIB, the IP address of this OSPF interface.
                                       ospfXIfAddressLessIf 1.3.6.1.4.1.33.10.13.4.1.2
Same as ospfIfAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for interfaces having no IP Address.
                                       ospfXIfTypeActual 1.3.6.1.4.1.33.10.13.4.1.3
The interface type.
                                       ospfXIfStatus 1.3.6.1.4.1.33.10.13.4.1.4
The status of the interface entry, including the entry in the standard OSPF MIB. Set to invalid to remove the entry.
                               ospfXAreaTable 1.3.6.1.4.1.33.10.13.5
Parameters for an OSPF area.
                                   ospfXAreaEntry 1.3.6.1.4.1.33.10.13.5.1
An area entry.
                                       ospfXAreaId 1.3.6.1.4.1.33.10.13.5.1.1
Same as ospfAreaId in OSPF MIB, the ID of the area.
                                       ospfXAreaStatus 1.3.6.1.4.1.33.10.13.5.1.2
The status of the area entry, including the entry in the standard OSPF MIB. Set to invalid to remove the entry.
                         xRouterIp 1.3.6.1.4.1.33.10.14
                               ipAdExtTable 1.3.6.1.4.1.33.10.14.1
Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the ipAddrTable is created or deleted.
                                   ipAdExtEntry 1.3.6.1.4.1.33.10.14.1.1
A particular entry.
                                       ipAdEntExtAddress 1.3.6.1.4.1.33.10.14.1.1.1
Same as ipAdEntAddr, a local address representing a network connection.
                                       ipAdEntExtProxyArp 1.3.6.1.4.1.33.10.14.1.1.2
Controls whether proxy ARP is active for this local address.
                                       ipAdEntExtRip 1.3.6.1.4.1.33.10.14.1.1.3
Controls whether RIP as a router discovery protocol is active for this local address.
                               ipRouterIfTable 1.3.6.1.4.1.33.10.14.2
Table of IP router values indexed by interface.
                                   ipRouterIfEntry 1.3.6.1.4.1.33.10.14.2.1
A particular entry.
                                       ipRouterIfIndex 1.3.6.1.4.1.33.10.14.2.1.1
The index of the interface; same as IfIndex.
                                       ipRouterIfProtocolPriority 1.3.6.1.4.1.33.10.14.2.1.2
The priority at which all Internet routed packets will be placed on the WAN output queue.
                                       ipRouterIfMTU 1.3.6.1.4.1.33.10.14.2.1.3
The size of the largest datagram that IP can transmit on this interface. The default value is actually hardware dependent.
                                       ipRouterIfRDP 1.3.6.1.4.1.33.10.14.2.1.4
Control for whether the router side of the Router Discovery Protocol is running on this interface.
                                       ipRouterIfArpPacketsIn 1.3.6.1.4.1.33.10.14.2.1.5
The number of ARP packets received on this interface.
                                       ipRouterIfArpPacketsOut 1.3.6.1.4.1.33.10.14.2.1.6
The number of ARP packets sent on this interface.
                                       ipRouterIfPacketsIn 1.3.6.1.4.1.33.10.14.2.1.7
The number of IP packets received on this interface.
                                       ipRouterIfPacketsOut 1.3.6.1.4.1.33.10.14.2.1.8
The number of IP packets sent on this interface.
                                       ipRouterIfForwardsIn 1.3.6.1.4.1.33.10.14.2.1.9
The number of IP packets received on this interface that were forwarded.
                                       ipRouterIfForwardsOut 1.3.6.1.4.1.33.10.14.2.1.10
The number of IP packets sent on this interface that were forwarded.
                               xIpTraffic 1.3.6.1.4.1.33.10.14.3
                                   ipTrafficSort 1.3.6.1.4.1.33.10.14.3.1
Setting to execute causes the most recent traffic information to be sorted into the ipTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to ready has no effect.
                                   ipTrafficTable 1.3.6.1.4.1.33.10.14.3.2
A list of traffic entries, sorted in the order specified by ipTrafficSort.
                                       ipTrafficEntry 1.3.6.1.4.1.33.10.14.3.2.1
A traffic entry.
                                           ipTrafficIndex 1.3.6.1.4.1.33.10.14.3.2.1.1
Identification of this traffic entry.
                                           ipTrafficPercent 1.3.6.1.4.1.33.10.14.3.2.1.2
The percentage of total traffic that this traffic entry represents, in tenths of a percent.
                                           ipTrafficDstAddr 1.3.6.1.4.1.33.10.14.3.2.1.3
The destination IP address of the traffic entry.
                                           ipTrafficSrcAddr 1.3.6.1.4.1.33.10.14.3.2.1.4
The source IP address of the traffic entry.
                                           ipTrafficProtocol 1.3.6.1.4.1.33.10.14.3.2.1.5
The IP protocol type of the traffic entry.
                                           ipTrafficDstPort 1.3.6.1.4.1.33.10.14.3.2.1.6
The destination TCP/UDP port of the traffic entry.
                                           ipTrafficSrcPort 1.3.6.1.4.1.33.10.14.3.2.1.7
The source TCP/UDP port of the traffic entry.
                                           ipTrafficIf 1.3.6.1.4.1.33.10.14.3.2.1.8
The inbound interface to which the traffic entry applies. This value is the same as IfIndex.
                                   ipTrafficMonitoring 1.3.6.1.4.1.33.10.14.3.3
Control for whether the router side of the Router Discovery Protocol is running on this interface.
                               xIpNetToMediaTable 1.3.6.1.4.1.33.10.14.4
iTouch extensions to the IP Address Translation Table.
                                   xIpNetToMediaEntry 1.3.6.1.4.1.33.10.14.4.1
Entry parameters.
                                       xIpNetToMediaCircuit 1.3.6.1.4.1.33.10.14.4.1.1
An additional identifier for the circuit (i.e. Frame Relay DLCI or X.25 VC) which the entry extends.
                                       xIpNetToMediaReverseArp 1.3.6.1.4.1.33.10.14.4.1.2
Whether reverse ARP is supported on this entry.
                         xRouterUdp 1.3.6.1.4.1.33.10.15
                               udpBcstServerTable 1.3.6.1.4.1.33.10.15.1
Table of servers to whom UDP broadcast messages will be forwarded.
                                   udpBcstServerEntry 1.3.6.1.4.1.33.10.15.1.1
A particular entry.
                                       udpBcstServerAddress 1.3.6.1.4.1.33.10.15.1.1.1
Internet address of the server.
                                       udpBcstServerStatus 1.3.6.1.4.1.33.10.15.1.1.2
The status of the server. Set to invalid to remove the entry.
                               udpBcstPortTable 1.3.6.1.4.1.33.10.15.2
Table of incoming UDP destination port numbers for which UDP broadcasts will be forwarded.
                                   udpBcstPortEntry 1.3.6.1.4.1.33.10.15.2.1
A particular entry.
                                       udpBcstPort 1.3.6.1.4.1.33.10.15.2.1.1
The incoming destination UDP port number.
                                       udpBcstPortStatus 1.3.6.1.4.1.33.10.15.2.1.2
The status of broadcast forwarding for the port. Set to invalid to remove the entry.
                               udpBcstRouting 1.3.6.1.4.1.33.10.15.3
The indication of whether this entity forwards UDP broadcasts.
                         xRouterPolicy 1.3.6.1.4.1.33.10.16
                               xImport 1.3.6.1.4.1.33.10.16.1
                                   impEgpRuleTable 1.3.6.1.4.1.33.10.16.1.1
The EGP import table.
                                       impEgpRuleEntry 1.3.6.1.4.1.33.10.16.1.1.1
An EGP import rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the route learned from the neighbor. The AS can be set to a wild card as can the IP network. When a route is learned from a neighbor, the most specific import rule is applied to the route. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the AS and IP network is the most exact rule. An exact match on the AS and a wild card match on the IP network is the 2nd most exact rule. A wild card match on the AS and an exact match on the IP network is the 3rd most exact match. Finally, a total wild card match is the least exact rule.
                                           impEgpRuleAs 1.3.6.1.4.1.33.10.16.1.1.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                                           impEgpRuleNetwork 1.3.6.1.4.1.33.10.16.1.1.1.2
The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.
                                           impEgpRuleAction 1.3.6.1.4.1.33.10.16.1.1.1.3
Control whether the route is learned or discarded.
                                           impEgpRulePreference 1.3.6.1.4.1.33.10.16.1.1.1.4
Preference to be stored with the route. The lower preference is preferred.
                                           impEgpRuleType 1.3.6.1.4.1.33.10.16.1.1.1.5
Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.
                                           impEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.1.1.1.6
How to apply the impEgpRuleMetric field to the metric learned with the route before storing it in the routing table.
                                           impEgpRuleMetric 1.3.6.1.4.1.33.10.16.1.1.1.7
Metric value to be applied to the metric learned learned with the route before storing it in the routing table.
                                           impEgpRuleStatus 1.3.6.1.4.1.33.10.16.1.1.1.8
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   impOspfRuleTable 1.3.6.1.4.1.33.10.16.1.2
The OSPF import table.
                                       impOspfRuleEntry 1.3.6.1.4.1.33.10.16.1.2.1
An OSPF import rule. Each rule is keyed by the IP network of the route and the AS from which it was learned. The Ip network and the AS can both be set to a wild card. When an OSPF route is added to the routing table, the most specific import rule is applied to set the preference of the route. An exact match on the Ip network and on the AS is the most exact rule. An exact match on the IP network and a wild card match on the AS is the 2nd most exact rule. A wild card match on both the on the AS and IP network is the next and least exact rule.
                                           impOspfRuleNetwork 1.3.6.1.4.1.33.10.16.1.2.1.1
The IP network of the route. The value 255.255.255.255 is a wild card matching any network.
                                           impOspfRulePreference 1.3.6.1.4.1.33.10.16.1.2.1.2
Preference to be stored with the route. The lower preference is preferred.
                                           impOspfRuleStatus 1.3.6.1.4.1.33.10.16.1.2.1.3
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   impRipRuleTable 1.3.6.1.4.1.33.10.16.1.3
The RIP import table.
                                       impRipRuleEntry 1.3.6.1.4.1.33.10.16.1.3.1
A RIP import rule. Each rule is keyed by the interface and the IP network of the route learned from the neighbor. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the IP network is the rule that will be applied. If an exact match does not exist, the rule with the wild card IP network is used.
                                           impRipRuleFromIf 1.3.6.1.4.1.33.10.16.1.3.1.1
The interface index of the interface where the rule applies, same as ifIndex.
                                           impRipRuleNetwork 1.3.6.1.4.1.33.10.16.1.3.1.2
The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.
                                           impRipRuleAction 1.3.6.1.4.1.33.10.16.1.3.1.3
Control whether the route is learned or discarded.
                                           impRipRulePreference 1.3.6.1.4.1.33.10.16.1.3.1.4
Preference to be stored with the route. The lower preference are preferred.
                                           impRipRuleType 1.3.6.1.4.1.33.10.16.1.3.1.5
Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.
                                           impRipRuleMetricAction 1.3.6.1.4.1.33.10.16.1.3.1.6
How to apply the impRipRuleMetric field to the metric learned with the route before storing it in the routing table.
                                           impRipRuleMetric 1.3.6.1.4.1.33.10.16.1.3.1.7
Metric value to be applied to the metric learned learned with the route before storing it in the routing table.
                                           impRipRuleStatus 1.3.6.1.4.1.33.10.16.1.3.1.8
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   impIsisRuleTable 1.3.6.1.4.1.33.10.16.1.4
The Isis import table.
                                       impIsisRuleEntry 1.3.6.1.4.1.33.10.16.1.4.1
An Isis import rule. Each rule is keyed by the IP network of the route learned from the neighbor. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the IP network is the rule that will be applied. If an exact match does not exist, the rule with the wild card IP network is used.
                                           impIsisRuleNetwork 1.3.6.1.4.1.33.10.16.1.4.1.1
The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.
                                           impIsisRuleAction 1.3.6.1.4.1.33.10.16.1.4.1.2
Control whether the route is learned or discarded.
                                           impIsisRulePreference 1.3.6.1.4.1.33.10.16.1.4.1.3
Preference to be stored with the route. The lower preference are preferred.
                                           impIsisRuleType 1.3.6.1.4.1.33.10.16.1.4.1.4
Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.
                                           impIsisRuleMetricAction 1.3.6.1.4.1.33.10.16.1.4.1.5
How to apply the impIsisRuleMetric field to the metric learned with the route before storing it in the routing table.
                                           impIsisRuleMetric 1.3.6.1.4.1.33.10.16.1.4.1.6
Metric value to be applied to the metric learned learned with the route before storing it in the routing table.
                                           impIsisRuleStatus 1.3.6.1.4.1.33.10.16.1.4.1.7
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                               xExport 1.3.6.1.4.1.33.10.16.2
                                   expEgpToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.1
The EGP to EGP export table.
                                       expEgpToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.1.1
An EGP to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The neighbor (to) AS can be set to a wild card as can the IP network and the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network From AS Rank exact exact exact 1st exact exact wild card 2nd exact wild card exact 3rd exact wild card wild card 4th wild card exact exact 5th wild card exact wild card 6th wild card wild card exact 7th wild card wild card wild card 8th
                                           expEgpToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.1.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                                           expEgpToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.1.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                           expEgpToEgpRuleFromAs 1.3.6.1.4.1.33.10.16.2.1.1.3
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
                                           expEgpToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.1.1.4
Control whether the route is advertised or not.
                                           expEgpToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.1.1.5
How to apply the expEgpToEgpRuleMetric field to the metric in the route table entry before the route is advertised.
                                           expEgpToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.1.1.6
Metric value to be applied to the metric in the route table entry before the route is advertised.
                                           expEgpToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.1.1.7
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expOspfToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.2
The OSPF to EGP export table.
                                       expOspfToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.2.1
An OSPF to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the OSPF route in the routing table, and the Autonomous System from which the route was learned. The neighbor (to) AS can be set to a wild card as can the IP network and the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network From AS Rank exact exact exact 1st exact exact wild card 2nd exact wild card exact 3rd exact wild card wild card 4th wild card exact exact 5th wild card exact wild card 6th wild card wild card exact 7th wild card wild card wild card 8th
                                           expOspfToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.2.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                                           expOspfToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.2.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                           expOspfToEgpRuleFromAs 1.3.6.1.4.1.33.10.16.2.2.1.3
The Autonomous System of the route in the route table. Local indicates that the route was not an external OSPF route. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.
                                           expOspfToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.2.1.4
Control whether the route is advertised or not.
                                           expOspfToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.2.1.5
How to apply the expOspfToEgpRuleMetric field to the metric in the route table entry before the route is advertised.
                                           expOspfToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.2.1.6
Metric value to be applied to the metric in the route table entry before the route is advertised.
                                           expOspfToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.2.1.7
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expStaticToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.3
The Static to EGP export table.
                                       expStaticToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.3.1
An Static to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Static route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
                                           expStaticToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.3.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                                           expStaticToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.3.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                           expStaticToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.3.1.3
Control whether the route is advertised or not.
                                           expStaticToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.3.1.4
How to apply the expStaticToEgpRuleMetric field to the metric in the route table entry before the route is advertised.
                                           expStaticToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.3.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
                                           expStaticToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.3.1.6
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expEgpToOspfRuleTable 1.3.6.1.4.1.33.10.16.2.4
The EGP to OSPF export table.
                                       expEgpToOspfRuleEntry 1.3.6.1.4.1.33.10.16.2.4.1
An EGP to OSPF export rule. Each rule is keyed by the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The Ip network can be set to a wild card as can the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
                                           expEgpToOspfRuleNetwork 1.3.6.1.4.1.33.10.16.2.4.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                           expEgpToOspfRuleFromAs 1.3.6.1.4.1.33.10.16.2.4.1.2
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
                                           expEgpToOspfRuleAction 1.3.6.1.4.1.33.10.16.2.4.1.3
Control whether the route is advertised or not.
                                           expEgpToOspfRuleStatus 1.3.6.1.4.1.33.10.16.2.4.1.4
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expRipToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.5
The Rip to EGP export table.
                                       expRipToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.5.1
An Rip to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Rip route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
                                           expRipToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.5.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                                           expRipToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.5.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                           expRipToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.5.1.3
Control whether the route is advertised or not.
                                           expRipToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.5.1.4
How to apply the expRipToEgpRuleMetric field to the metric in the route table entry before the route is advertised.
                                           expRipToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.5.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
                                           expRipToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.5.1.6
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expRipToOspfRuleTable 1.3.6.1.4.1.33.10.16.2.6
The RIP to OSPF export table.
                                       expRipToOspfRuleEntry 1.3.6.1.4.1.33.10.16.2.6.1
A RIP to OSPF export rule. Each rule is keyed by the IP network of the RIP route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd
                                           expRipToOspfRuleNetwork 1.3.6.1.4.1.33.10.16.2.6.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                           expRipToOspfRuleAction 1.3.6.1.4.1.33.10.16.2.6.1.2
Control whether the route is advertised or not.
                                           expRipToOspfRuleStatus 1.3.6.1.4.1.33.10.16.2.6.1.3
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expEgpToRipRuleTable 1.3.6.1.4.1.33.10.16.2.7
The EGP to RIP export table.
                                       expEgpToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.7.1
An EGP to RIP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
                                           expEgpToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.7.1.1
The IP address of the RIP interface to which the rule applies.
                                           expEgpToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.7.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                           expEgpToRipRuleFromAs 1.3.6.1.4.1.33.10.16.2.7.1.3
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
                                           expEgpToRipRuleAction 1.3.6.1.4.1.33.10.16.2.7.1.4
Control whether the route is advertised or not.
                                           expEgpToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.7.1.5
How to apply the expEgpToRipRuleMetric field to the metric in the route table entry before the route is advertised.
                                           expEgpToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.7.1.6
Metric value to be applied to the metric in the route table entry before the route is advertised.
                                           expEgpToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.7.1.7
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expOspfToRipRuleTable 1.3.6.1.4.1.33.10.16.2.8
The OSPF to RIP export table.
                                       expOspfToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.8.1
An Ospf to RIP export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
                                           expOspfToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.8.1.1
The IP address of the RIP interface to which the rule applies.
                                           expOspfToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.8.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                           expOspfToRipRuleFromAs 1.3.6.1.4.1.33.10.16.2.8.1.3
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.
                                           expOspfToRipRuleAction 1.3.6.1.4.1.33.10.16.2.8.1.4
Control whether the route is advertised or not.
                                           expOspfToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.8.1.5
How to apply the expOspfToRipRuleMetric field to the metric in the route table entry before the route is advertised.
                                           expOspfToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.8.1.6
Metric value to be applied to the metric in the route table entry before the route is advertised.
                                           expOspfToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.8.1.7
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is true for the all wild cards where the AS is set to local
                                   expRipToRipRuleTable 1.3.6.1.4.1.33.10.16.2.9
The Rip to Rip export table.
                                       expRipToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.9.1
An Rip to Rip export rule. Each rule is keyed by the IP network of the Rip route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd
                                           expRipToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.9.1.1
The IP address of the RIP interface to which the rule applies.
                                           expRipToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.9.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                           expRipToRipRuleAction 1.3.6.1.4.1.33.10.16.2.9.1.3
Control whether the route is advertised or not.
                                           expRipToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.9.1.4
How to apply the expRipToRipRuleMetric field to the metric in the route table entry before the route is advertised.
                                           expRipToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.9.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
                                           expRipToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.9.1.6
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expStaticToRipRuleTable 1.3.6.1.4.1.33.10.16.2.10
The Static to Rip export table.
                                         expStaticToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.10.1
An Static to Rip export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd
                                             expStaticToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.10.1.1
The IP address of the RIP interface to which the rule applies.
                                             expStaticToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.10.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                             expStaticToRipRuleAction 1.3.6.1.4.1.33.10.16.2.10.1.3
Control whether the route is advertised or not.
                                             expStaticToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.10.1.4
How to apply the expStaticToRipRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expStaticToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.10.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expStaticToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.10.1.6
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expIsisToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.11
The Isis to EGP export table.
                                         expIsisToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.11.1
An Isis to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Isis route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .
                                             expIsisToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.11.1.1
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                                             expIsisToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.11.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                             expIsisToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.11.1.3
Control whether the route is advertised or not.
                                             expIsisToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.11.1.4
How to apply the expIsisToEgpRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expIsisToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.11.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expIsisToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.11.1.6
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expIsisToOspfRuleTable 1.3.6.1.4.1.33.10.16.2.12
The Isis to Ospf export table.
                                         expIsisToOspfRuleEntry 1.3.6.1.4.1.33.10.16.2.12.1
An Isis to Ospf export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
                                             expIsisToOspfRuleNetwork 1.3.6.1.4.1.33.10.16.2.12.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                             expIsisToOspfRuleAction 1.3.6.1.4.1.33.10.16.2.12.1.2
Control whether the route is advertised or not.
                                             expIsisToOspfRuleStatus 1.3.6.1.4.1.33.10.16.2.12.1.3
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expIsisToRipRuleTable 1.3.6.1.4.1.33.10.16.2.13
The Isis to Rip export table.
                                         expIsisToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.13.1
An Isis to Rip export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
                                             expIsisToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.13.1.1
The IP address of the RIP interface to which the rule applies.
                                             expIsisToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.13.1.2
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                             expIsisToRipRuleAction 1.3.6.1.4.1.33.10.16.2.13.1.3
Control whether the route is advertised or not.
                                             expIsisToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.13.1.4
How to apply the expIsisToRipRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expIsisToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.13.1.5
Metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expIsisToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.13.1.6
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expEgpToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.14
The EGP to Isis export table.
                                         expEgpToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.14.1
An EGP to Isis export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .
                                             expEgpToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.14.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                             expEgpToIsisRuleFromAs 1.3.6.1.4.1.33.10.16.2.14.1.2
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
                                             expEgpToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.14.1.3
Control whether the route is advertised or not.
                                             expEgpToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.14.1.4
Whether to advertise the metric as Internal or External.
                                             expEgpToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.5
How to apply the expEgpToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expEgpToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.14.1.6
Default metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expEgpToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.7
How to apply the expEgpToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expEgpToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.14.1.8
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expEgpToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.9
How to apply the expEgpToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expEgpToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.14.1.10
Error metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expEgpToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.11
How to apply the expEgpToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expEgpToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.14.1.12
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expEgpToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.14.1.13
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expOspfToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.15
The Ospf to Isis export table.
                                         expOspfToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.15.1
An Ospf to Isis export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .
                                             expOspfToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.15.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                             expOspfToIsisRuleFromAs 1.3.6.1.4.1.33.10.16.2.15.1.2
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.
                                             expOspfToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.15.1.3
Control whether the route is advertised or not.
                                             expOspfToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.15.1.4
Whether to advertise the metric as Internal or External.
                                             expOspfToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.5
How to apply the expOspfToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expOspfToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.15.1.6
Default metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expOspfToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.7
How to apply the expOspfToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expOspfToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.15.1.8
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expOspfToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.9
How to apply the expOspfToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expOspfToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.15.1.10
Error metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expOspfToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.11
How to apply the expOspfToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expOspfToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.15.1.12
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expOspfToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.15.1.13
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is true for the all wild cards where the AS is set to local
                                   expRipToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.16
The Isis to Isis export table.
                                         expRipToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.16.1
An Isis to Isis export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
                                             expRipToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.16.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                             expRipToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.16.1.2
Control whether the route is advertised or not.
                                             expRipToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.16.1.3
Whether to advertise the metric as Internal or External.
                                             expRipToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.4
How to apply the expRipToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expRipToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.16.1.5
Default metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expRipToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.6
How to apply the expRipToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expRipToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.16.1.7
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expRipToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.8
How to apply the expRipToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expRipToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.16.1.9
Error metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expRipToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.10
How to apply the expRipToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expRipToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.16.1.11
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expRipToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.16.1.12
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                                   expStaticToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.17
The Static to Isis export table.
                                         expStaticToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.17.1
An Static to Isis export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
                                             expStaticToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.17.1.1
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                                             expStaticToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.17.1.2
Control whether the route is advertised or not.
                                             expStaticToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.17.1.3
Whether to advertise the metric as Internal or External.
                                             expStaticToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.4
How to apply the expStaticToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expStaticToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.17.1.5
Default metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expStaticToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.6
How to apply the expStaticToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expStaticToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.17.1.7
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expStaticToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.8
How to apply the expStaticToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expStaticToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.17.1.9
Error metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expStaticToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.10
How to apply the expStaticToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised.
                                             expStaticToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.17.1.11
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
                                             expStaticToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.17.1.12
The status of the rule. Set to invalid to remove the rule. If the all wild card rule is removed, it is automatically readded with default values.
                               xFilter 1.3.6.1.4.1.33.10.16.3
                                   ipIfFilterTable 1.3.6.1.4.1.33.10.16.3.1
Table of filter entries.
                                       ipIfFilterEntry 1.3.6.1.4.1.33.10.16.3.1.1
A particular entry.
                                           ipIfFilterIndex 1.3.6.1.4.1.33.10.16.3.1.1.1
The interface index with which this entry is associated. This value is the same as IfIndex.
                                           ipIfFilterDstAddr 1.3.6.1.4.1.33.10.16.3.1.1.2
The destination IP address to use in the filter match.
                                           ipIfFilterDstMask 1.3.6.1.4.1.33.10.16.3.1.1.3
The destination IP mask to use in the filter match.
                                           ipIfFilterSrcAddr 1.3.6.1.4.1.33.10.16.3.1.1.4
The source IP address to use in the filter match.
                                           ipIfFilterSrcMask 1.3.6.1.4.1.33.10.16.3.1.1.5
The source IP mask to use in the filter match.
                                           ipIfFilterProtocol 1.3.6.1.4.1.33.10.16.3.1.1.6
The protocol to use in the filter match. The value 256 indicates any protocol.
                                           ipIfFilterDstPort 1.3.6.1.4.1.33.10.16.3.1.1.7
The destination port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any destination port.
                                           ipIfFilterSrcPort 1.3.6.1.4.1.33.10.16.3.1.1.8
The source port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any source port.
                                           ipIfFilterAction 1.3.6.1.4.1.33.10.16.3.1.1.9
Control whether the packet for which this filter is the best match should be forwarded or discarded.
                                           ipIfFilterStatus 1.3.6.1.4.1.33.10.16.3.1.1.10
The status of the filter entry. Set to invalid to remove the entry.
                                   ipFilterState 1.3.6.1.4.1.33.10.16.3.2
The indication of whether this system does IP filtering.
                                   ipIfFilter2Table 1.3.6.1.4.1.33.10.16.3.3
Table of filter entries.
                                       ipIfFilter2Entry 1.3.6.1.4.1.33.10.16.3.3.1
A particular entry.
                                           ipIfFilter2Index 1.3.6.1.4.1.33.10.16.3.3.1.1
The interface index with which this entry is associated. This value is the same as IfIndex.
                                           ipIfFilter2DstAddr 1.3.6.1.4.1.33.10.16.3.3.1.2
The destination IP address to use in the filter match.
                                           ipIfFilter2DstMask 1.3.6.1.4.1.33.10.16.3.3.1.3
The destination IP mask to use in the filter match.
                                           ipIfFilter2SrcAddr 1.3.6.1.4.1.33.10.16.3.3.1.4
The source IP address to use in the filter match.
                                           ipIfFilter2SrcMask 1.3.6.1.4.1.33.10.16.3.3.1.5
The source IP mask to use in the filter match.
                                           ipIfFilter2Protocol 1.3.6.1.4.1.33.10.16.3.3.1.6
The protocol to use in the filter match. The value 256 indicates any protocol.
                                           ipIfFilter2DstPortStart 1.3.6.1.4.1.33.10.16.3.3.1.7
The starting destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets.
                                           ipIfFilter2SrcPortStart 1.3.6.1.4.1.33.10.16.3.3.1.8
The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets.
                                           ipIfFilter2Action 1.3.6.1.4.1.33.10.16.3.3.1.9
Control whether the packet for which this filter is the best match should be forwarded or discarded.
                                           ipIfFilter2Status 1.3.6.1.4.1.33.10.16.3.3.1.10
The status of the filter entry. Set to invalid to remove the entry.
                                           ipIfFilter2DstPortEnd 1.3.6.1.4.1.33.10.16.3.3.1.11
The ending destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed must also be greater or equal to the ipIfFilter2DstPortStart field.
                                           ipIfFilter2SrcPortEnd 1.3.6.1.4.1.33.10.16.3.3.1.12
The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed must also be greater or equal to the ipIfFilter2SrcPortStart field.
                                           ipIfFilter2TcpSyn 1.3.6.1.4.1.33.10.16.3.3.1.13
The value of the TCP SYN and ACK bit to ues in the filter match. This field only applies to TCP packets. On indicates that the SYN bit is on and the ACK bit is off. Off is any other combination.
                                           ipIfFilter2ProtocolPriority 1.3.6.1.4.1.33.10.16.3.3.1.14
Control the priority at which the packet for which this filter is the best match should be placed on the WAN output queue. None indicates that the sending interfaces protocol priority should be used.
                         xRip 1.3.6.1.4.1.33.10.18
                               ripState 1.3.6.1.4.1.33.10.18.1
The indication of whether this system participates in RIP.
                               ripStatus 1.3.6.1.4.1.33.10.18.2
The status of the RIP software.
                               ripNetTable 1.3.6.1.4.1.33.10.18.3
Table of RIP entries.
                                   ripNetEntry 1.3.6.1.4.1.33.10.18.3.1
A particular entry.
                                       ripNetNet 1.3.6.1.4.1.33.10.18.3.1.1
The IP Network to which this entry applies.
                                       ripNetState 1.3.6.1.4.1.33.10.18.3.1.2
This value controls the RIP protocol on this network.
                                       ripNetRipsIn 1.3.6.1.4.1.33.10.18.3.1.3
The number of RIP packets received from routers on this IP network.
                                       ripNetRipsOut 1.3.6.1.4.1.33.10.18.3.1.4
The number of RIP packets sent to routers on this IP network.
                                       ripNetAlgorithm 1.3.6.1.4.1.33.10.18.3.1.5
This value controls the RIP algorithm on this network.
                         xlpd 1.3.6.1.4.1.33.10.19
                               lpdQueueTable 1.3.6.1.4.1.33.10.19.1
A list of lpd queues on the server.
                                   lpdQueueEntry 1.3.6.1.4.1.33.10.19.1.1
Lpd parameter values plus counters for an individual lpd queue.
                                       lpdQueueStatus 1.3.6.1.4.1.33.10.19.1.1.1
Status of this entry. Setting the value to invalid invalidates the entry, corresponding directly to the CLEAR/PURGE SERVER LPD QUEUE command. Setting the value to valid validates (creates) the entry, corresonding directly to the DEF/SET SERVER LPD QUEUE and lpd create commands.
                                       lpdQueueName 1.3.6.1.4.1.33.10.19.1.1.2
Name of the LPD queue, case sensitive.
                                       lpdQueuePorts 1.3.6.1.4.1.33.10.19.1.1.3
List of ports assigned to the queue. An lpd queue can be associated with more than 1 port. This object corresponds to the port-list in the DEF/SET SERVER LPD QUEUE and lpc/create commands. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Character MIB [11]. Corresponding bit numbers start with 1 as the high-order bit of the first octet.
                                       lpdQueueEnabled 1.3.6.1.4.1.33.10.19.1.1.4
Flag indicates if the queue is enabled. A disabled queue will reject print requests from remote systems. A enabled queue accepts requests for printing.
                                       lpdQueueLfConversion 1.3.6.1.4.1.33.10.19.1.1.5
Flag indicates if the queue is converting linefeeds to linefeeds, carriagereturns. lfcr does the converion, lf does not.
                                       lpdQueueTotalJobs 1.3.6.1.4.1.33.10.19.1.1.6
The total number of jobs on the queue. This number should be equal to the number of active and waiting jobs. (lpdQueueActive + lpdQueueWaiting)
                                       lpdQueueActiveJobs 1.3.6.1.4.1.33.10.19.1.1.7
The number of active jobs on the queue. An active job is a job that has been assigned a port is in the process of receiving data from a remote host and sending it out the port.
                                       lpdQueueWaitingJobs 1.3.6.1.4.1.33.10.19.1.1.8
The number of waiting jobs on the queue. A waiting job is a job that needs a port to send its data to. This implies that the ports associated with this queue are busy.
                                       lpdQueueProcessedJobs 1.3.6.1.4.1.33.10.19.1.1.9
The total number of jobs processed by this queue since server boot.
                                       lpdQueueFormFeed 1.3.6.1.4.1.33.10.19.1.1.10
A control to determine how we will send out a formfeed when printing a lpd job. formfeedafter: Send after job, formfeedbefore: Send before job, formfeednone: Send no formfeed.
                                       lpdQueueBypass 1.3.6.1.4.1.33.10.19.1.1.11
Control for a queue to bypass a LPD port which has output inhibited via flow control. Corresponds directly to the value labeled Bypass in the SERVER LPD QUEUE display.
                               lpdJobTable 1.3.6.1.4.1.33.10.19.2
A list of lpd jobs.
                                   lpdJobEntry 1.3.6.1.4.1.33.10.19.2.1
A single lpd Job.
                                       lpdJobStatus 1.3.6.1.4.1.33.10.19.2.1.1
Status of this entry. Setting this object to invalid will remove the job from the queue. Setting this object ot valid has no effect since the only way to create an lpd job is with the lpd protocol.
                                       lpdJobNumber 1.3.6.1.4.1.33.10.19.2.1.2
The queue relative job number for this lpd job. Job numbers are assigned as jobs are accepted onto the queue. Job numbers are reset to 1 when they reach a value greater than 1000 and the queue goes empty.
                                       lpdJobAssignedPort 1.3.6.1.4.1.33.10.19.2.1.3
The number of the port assigned to the lpd job.
                                       lpdJobFileSize 1.3.6.1.4.1.33.10.19.2.1.4
The size of the file being sent from the remote system.
                                       lpdJobHostName 1.3.6.1.4.1.33.10.19.2.1.5
The name of the host sending the job.
                                       lpdJobFileName 1.3.6.1.4.1.33.10.19.2.1.6
The name of the file being sent.
                                       lpdJobState 1.3.6.1.4.1.33.10.19.2.1.7
completed.
                         xSecurID 1.3.6.1.4.1.33.10.20
                               securIDServerName0 1.3.6.1.4.1.33.10.20.1
The Domain name of the first SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER0 and the value labeled SecurID Server0: in the SERVER SECURID display.
                               securIDServerName1 1.3.6.1.4.1.33.10.20.2
The Domain name of the second SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER1 and the value labeled SecurID Server1: in the SERVER SECURID display.
                               securIDServerName2 1.3.6.1.4.1.33.10.20.3
The Domain name of the third SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER2 and the value labeled SecurID Server2: in the SERVER SECURID display.
                               securIDServerName3 1.3.6.1.4.1.33.10.20.4
The Domain name of the fourth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER3 and the value labeled SecurID Server3: in the SERVER SECURID display.
                               securIDServerName4 1.3.6.1.4.1.33.10.20.5
The Domain name of the fifth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER4 and the value labeled SecurID Server4: in the SERVER SECURID display.
                               securIDMaxRetries 1.3.6.1.4.1.33.10.20.6
The maximum number of times the server will try any single SecurID server to validate a PASSCODE. Corresponds directly to SERVER SECURID ACMMAXRETRIES and the value labeled SecurID ACMMAXRETRIES: in the SERVER SECURID display.
                               securIDBaseTimeout 1.3.6.1.4.1.33.10.20.7
The initial timeout value to be used between prompts for a SecurID PASSCODE. Corresponds directly to SERVER SECURID ACMBASETIMEOUT and the value labeled SecurID ACMBASETIMEOUT: in the SERVER SECURID display.
                               securIDPort 1.3.6.1.4.1.33.10.20.8
The UDP port number to be used when communicating with the SecurID servers. Corresponds directly to SERVER SECURID ACM_PORT and the value labeled SecurID ACM_PORT: in the SERVER SECURID display.
                               securIDQueryLimit 1.3.6.1.4.1.33.10.20.9
The maximum number of times a user will be queried for a SecurID PASSCODE before being logged out. Corresponds directly to SERVER SECURID QUERY LIMIT and the value labeled SecurID Query Limit: in the SERVER SECURID display.
                               securIDEncryptionMode 1.3.6.1.4.1.33.10.20.10
The type of encryption to use in SecurID validation. Corresponds directly to the value labeled Encryption Mode in the SERVER SECURID display.
                               securIDInsecureLogins 1.3.6.1.4.1.33.10.20.11
The number of user logins on ports for which SecurID user verification is not enabled. Corresponds directly to the value labeled Logins without SecurID: in the SERVER SECURID display.
                               securIDSecureLogins 1.3.6.1.4.1.33.10.20.12
The number of successful user logins on ports for which SecurID user verification is enabled. Corresponds directly to the value labeled Successful Logins: in the SERVER SECURID display.
                               securIDSecureLoginsFailed 1.3.6.1.4.1.33.10.20.13
The number of verification failures due to incorrect PASSCODE for attempted user logins on ports for which SecurID user verification is enabled. Corresponds directly to the value labeled Unsuccessful Logins: in the SERVER SECURID display.
                               securIDServerAccess0 1.3.6.1.4.1.33.10.20.14
The number of times the system successfully accessed the SecurID server0. Corresponds directly to the value labeled Attempts to access:, Server0, and Successful: in the SERVER SECURID display.
                               securIDServerAccessFailed0 1.3.6.1.4.1.33.10.20.15
The number of times the system unsuccessfully accessed the SecurID server0. Corresponds directly to the value labeled Attempts to access:, Server0, and UnSuccessful: in the SERVER SECURID display.
                               securIDServerAccess1 1.3.6.1.4.1.33.10.20.16
The number of times the system successfully accessed the SecurID server1. Corresponds directly to the value labeled Attempts to access:, Server1, and Successful: in the SERVER SECURID display.
                               securIDServerAccessFailed1 1.3.6.1.4.1.33.10.20.17
The number of times the system unsuccessfully accessed the SecurID server1. Corresponds directly to the value labeled Attempts to access:, Server1, and UnSuccessful: in the SERVER SECURID display.
                               securIDServerAccess2 1.3.6.1.4.1.33.10.20.18
The number of times the system successfully accessed the SecurID server2. Corresponds directly to the value labeled Attempts to access:, Server2, and Successful: in the SERVER SECURID display.
                               securIDServerAccessFailed2 1.3.6.1.4.1.33.10.20.19
The number of times the system unsuccessfully accessed the SecurID server2. Corresponds directly to the value labeled Attempts to access:, Server2, and UnSuccessful: in the SERVER SECURID display.
                               securIDServerAccess3 1.3.6.1.4.1.33.10.20.20
The number of times the system successfully accessed the SecurID server3. Corresponds directly to the value labeled Attempts to access:, Server3, and Successful: in the SERVER SECURID display.
                               securIDServerAccessFailed3 1.3.6.1.4.1.33.10.20.21
The number of times the system unsuccessfully accessed the SecurID server3. Corresponds directly to the value labeled Attempts to access:, Server3, and UnSuccessful: in the SERVER SECURID display.
                               securIDServerAccess4 1.3.6.1.4.1.33.10.20.22
The number of times the system successfully accessed the SecurID server4. Corresponds directly to the value labeled Attempts to access:, Server4, and Successful: in the SERVER SECURID display.
                               securIDServerAccessFailed4 1.3.6.1.4.1.33.10.20.23
The number of times the system unsuccessfully accessed the SecurID server4. Corresponds directly to the value labeled Attempts to access:, Server4, and UnSuccessful: in the SERVER SECURID display.
                               securIDErrorPortIndex 1.3.6.1.4.1.33.10.20.24
The index of the most recent port on which a SecurID access violation occurred. Corresponds directly to the value labeled Last Unsuccessful Login: in the SERVER SECURID display.
                               securIDError 1.3.6.1.4.1.33.10.20.25
The error number of the most recent SecurID-related error. Corresponds directly to the value labeled Reason: in the SERVER SECURID display. See iTouch documentation for a complete list of error numbers and their meaning.
                               securIDErrorUsername 1.3.6.1.4.1.33.10.20.26
The username associated with the most recent SecurID-related error. Corresponds directly to the value labeled Username: in the SERVER SECURID display.
                               securIDPortTable 1.3.6.1.4.1.33.10.20.27
A list of SecurID character port entries.
                                     securIDPortEntry 1.3.6.1.4.1.33.10.20.27.1
Parameter values for a SecurID port.
                                         securIDPortIndex 1.3.6.1.4.1.33.10.20.27.1.1
An index value that uniquely identifies a port could relate to SecurID. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                                         securIDPortStatus 1.3.6.1.4.1.33.10.20.27.1.2
A control indicating the level of SecurID operation on the port. Corresponds directly to PORT SECURID and the value SecurID following the label Enabled Characteristics in the PORT CHARACTERISTICS display.
                         xSsh 1.3.6.1.4.1.33.10.23
                               sshPortTable 1.3.6.1.4.1.33.10.23.1
A list of SSH port entries
                                   sshPortEntry 1.3.6.1.4.1.33.10.23.1.1
Parameter values for an SSH port.
                                       sshPortIndex 1.3.6.1.4.1.33.10.23.1.1.1
An index value that uniquely identifies an SSH port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the proposed standard Internet Character MIB.
                                       sshPortIncomingTcpPort 1.3.6.1.4.1.33.10.23.1.1.2
Specifies the TCP port number used to identify the port when a SSH connection request arrives at the server. The default for a physical port is 2022 + 100 * ports physical port number. The default is 22 for virtual ports. Corresponds directly to the value labeled Remote Port: in the PORT SSH CHARACTERISTICS display.
                                       sshPortNewlineFiltering 1.3.6.1.4.1.33.10.23.1.1.3
Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network during a SSH session, before sending the newline to the character port. The value indicates which input sequence is converted to which output sequence and sent to the character port, with none meaning no translation. Corresponds directly to the value labeled Newline Filtering: in the PORT SSH CHARACTERISTICS display.
                                       sshPortNewline 1.3.6.1.4.1.33.10.23.1.1.4
Translation to apply to newline (carriage return) received from the character port during an SSH session, before sending the newline to the remote partner. Corresponds directly to the value labeled Newline: in the PORT SSH CHARACTERISTICS display.
                                       sshPortTransmitBufferedTime 1.3.6.1.4.1.33.10.23.1.1.5
Number of milliseconds to wait before transmitting data received from a character port during an interactive SSH session. Corresponds directly to the value labeled Transmit Buffered Time: in the PORT SSH CHARACTERISTICS display.
                                       sshPortRemoteProtocol 1.3.6.1.4.1.33.10.23.1.1.6
Indicates which remote protocols will be accepted at this port. Corresponds indirectly to the presence of Telnet or SSH under the label Enabled Characteristics: in the PORT SSH CHARACTERISTICS display. If both protocols are accepted at the port, the choice of protocol is determined by which features are enabled on the server with SSH taking precedence over Telnet.
                               sshCipherMask 1.3.6.1.4.1.33.10.23.2
This is a list of the encryption methods supported. The OCTET STRING contains a bitmap, with one bit for each cipher type. Corresponding bit numbers start with 0 as the low-order bit of the second octet. The following bit positions are defined: none(0), des(2), tripleDes(3), and blowfish(6). Corresponds directly to the value labeled SSH Cipher Enabled: in the SERVER SSH CHARACTERISTICS display.
                               sshAuthenticationTimeout 1.3.6.1.4.1.33.10.23.3
The timeout in minutes before disconnecting if no successful authentication of SSH parties has been made. Corresponds directly to the value labeled Authentication Timeout: in the SERVER SSH CHARACTERISTICS display.
                               sshHostKeyLength 1.3.6.1.4.1.33.10.23.4
The bit length of the SSH host encryption key. When modified, the desired change does not occur until the next system initialization. Corresponds directly to the value labeled Host Key Length: in the SERVER SSH CHARACTERISTICS display.
                               sshHostKeyGenerate 1.3.6.1.4.1.33.10.23.5
For a set-request with a value of generate or update, a new host key will be generated in the background. When modified with generate, the desired change does not occur until the next system initialization whereas when modified with update the change goes into effect upon completion of the new key. In response to a get-request or a get-next-request the agent will respond ready except when a host key is being created in which case the agent responds generate.
                               sshServerKeyLength 1.3.6.1.4.1.33.10.23.6
The bit length of the SSH server encryption key. The difference between the server and host key lengths should be greater than 128 bits. Corresponds directly to the value labeled Server Key Length: in the SERVER SSH CHARACTERISTICS display.
                               sshServerKeyTtl 1.3.6.1.4.1.33.10.23.7
The time in minutes that the server key remains valid. After this time the server key is automatically re-generated. Corresponds directly to the value labeled Server Key Timeout: in the SERVER SSH CHARACTERISTICS display.
                               sshServerMaxBufferSize 1.3.6.1.4.1.33.10.23.8
The size of the four buffers used by SSH for input and output. These buffers are used for data coming from the console, going to the network, coming from the network and going to the console.
                   xEthernet 1.3.6.1.4.1.33.11
                         etherTable 1.3.6.1.4.1.33.11.1
A list of generic entries.
                             etherEntry 1.3.6.1.4.1.33.11.1.1
Generic status and parameter values for an Ethernet interface.
                                 etherIndex 1.3.6.1.4.1.33.11.1.1.1
An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                 etherAlignmentErrors 1.3.6.1.4.1.33.11.1.1.2
A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check.
                                 etherFCSErrors 1.3.6.1.4.1.33.11.1.1.3
A count of frames received on a particular interface that are an integral number of octets in length that do not pass the FCS check.
                         etherTxTable 1.3.6.1.4.1.33.11.2
A list of Ethernet transmit entries.
                             etherTxEntry 1.3.6.1.4.1.33.11.2.1
Transmit status and parameter values for an Ethernet interface.
                                 etherTxIndex 1.3.6.1.4.1.33.11.2.1.1
An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                 etherTxSingleCollisionFrames 1.3.6.1.4.1.33.11.2.1.2
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the etherTxMultipleCollisionFrames object.
                                 etherTxMultipleCollisionFrames 1.3.6.1.4.1.33.11.2.1.3
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts or ifOutNUcastPkts object and is not counted by the corresponding instance of the etherTxSingleCollisionFrames object.
                         etherMulticastTable 1.3.6.1.4.1.33.11.3
A list of etherMulticast entries.
                             etherMulticastEntry 1.3.6.1.4.1.33.11.3.1
EtherMulticast status and parameter values for an Ethernet interface.
                                 etherMulticastIndex 1.3.6.1.4.1.33.11.3.1.1
An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                 etherMulticastBytesIn 1.3.6.1.4.1.33.11.3.1.2
A count of frames successfully received on a particular interface and for which the destination address multicast bit was set. Bytes that are counted by an instance of this object are also counted by the corresponding instance of the ifInOctets object.
                                 etherMulticastBytesOut 1.3.6.1.4.1.33.11.3.1.3
A count of successfully frames successfully transmitted on a particular interface and for which the destination address multicast bit was set. Bytes that are counted by an instance of this object are also counted by the corresponding instance of the ifOutOctets object.
                         etherXTxTable 1.3.6.1.4.1.33.11.4
A list of Ethernet extended transmit entries.
                             etherXTxEntry 1.3.6.1.4.1.33.11.4.1
Extended transmit status and parameter values for an Ethernet interface.
                                 etherXTxIndex 1.3.6.1.4.1.33.11.4.1.1
An index value that uniquely identifies an Ethernet interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                 etherXTxExcessiveCollisions 1.3.6.1.4.1.33.11.4.1.2
A count of frames for which transmission on a particular interface fails due to excessive collisions.
                   xDecnet 1.3.6.1.4.1.33.14
                         xRcp 1.3.6.1.4.1.33.14.1
                             rcpRemoteAddress 1.3.6.1.4.1.33.14.1.1
If a remote console session exists, the Ethernet address of the remote partner, otherwise zero length.
                         xPhiv 1.3.6.1.4.1.33.14.2
                             xPhivRoute 1.3.6.1.4.1.33.14.2.1
                                 phivPathSelection 1.3.6.1.4.1.33.14.2.1.1
The algorithm used to balance traffic between equal next hop paths. roundRobin selects the next hop using a round robin algorithm for each hop. samePath selects the next hop guaranteeing that all packets with the same source/destination pair will always use the same next hop.
                                 phivMaxPaths 1.3.6.1.4.1.33.14.2.1.2
The maximum number of equal cost next hops that the router can remember and successfully load balance between.
                                 phivStatus 1.3.6.1.4.1.33.14.2.1.3
The status of the DECnet routing software.
                             xPhivCircuit 1.3.6.1.4.1.33.14.2.2
                                 phivCircuitTable 1.3.6.1.4.1.33.14.2.2.1
A list of DECnet circuit entries.
                                     phivCircuitEntry 1.3.6.1.4.1.33.14.2.2.1.1
Parameter values for a DECnet circuit.
                                         xPhivCircuitIndex 1.3.6.1.4.1.33.14.2.2.1.1.1
Identification of a circuit entry. Same as an interface index (ifIndex).
                                         phivCircuitRoutingTimer 1.3.6.1.4.1.33.14.2.2.1.1.2
The maximum time in seconds allowed between Routing updates on the circuit. Different values for LANs vs. WANs.
                                         phivCircuitOperCost 1.3.6.1.4.1.33.14.2.2.1.1.3
The actual cost associated with the circuit.
                                         phivCircuitErrors 1.3.6.1.4.1.33.14.2.2.1.1.4
The number of routed DECnet packets received in error on this circuit.
                                         phivCircuitLastError 1.3.6.1.4.1.33.14.2.2.1.1.5
The error of the last routed DECnet packet received in error on this circuit.
                                         phivCircuitLastErrorTime 1.3.6.1.4.1.33.14.2.2.1.1.6
The date and time that the last routed DECnet packet was received in error on this circuit.
                                         phivCircuitLastErrorData 1.3.6.1.4.1.33.14.2.2.1.1.7
The first 22 bytes of the last routed DECnet packet received in error on this circuit.
                                         phivCircuitProtocolPriority 1.3.6.1.4.1.33.14.2.2.1.1.8
The priority at which all DECnet routed packets will be placed on the WAN output queue.
                                         phivCircuitRoutingPriority 1.3.6.1.4.1.33.14.2.2.1.1.9
Routers priority to be designated router on this circuit.
                             xPhivImport 1.3.6.1.4.1.33.14.2.3
                                 phivCircuitImportTable 1.3.6.1.4.1.33.14.2.3.1
A list of circuit import filter entries.
                                     phivCircuitImportEntry 1.3.6.1.4.1.33.14.2.3.1.1
Parameter values for an import filter.
                                         phivCircuitImportIf 1.3.6.1.4.1.33.14.2.3.1.1.1
The interface associated with the import routing filter.
                                         phivCircuitImportAddr 1.3.6.1.4.1.33.14.2.3.1.1.2
The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database.
                                         phivCircuitImportMask 1.3.6.1.4.1.33.14.2.3.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
                                         phivCircuitImportAction 1.3.6.1.4.1.33.14.2.3.1.1.4
The action to take if the address field along with the mask field matches the route entry.
                                         phivCircuitImportStatus 1.3.6.1.4.1.33.14.2.3.1.1.5
Setting to invalid removes this import filter from the table. Setting to valid has no effect.
                             xPhivImportArea 1.3.6.1.4.1.33.14.2.4
                                 phivCircuitImportAreaTable 1.3.6.1.4.1.33.14.2.4.1
A list of circuit import area filter entries.
                                     phivCircuitImportAreaEntry 1.3.6.1.4.1.33.14.2.4.1.1
Parameter values for an import area filter.
                                         phivCircuitImportAreaIf 1.3.6.1.4.1.33.14.2.4.1.1.1
The interface associated with the import area routing filter.
                                         phivCircuitImportAreaAddr 1.3.6.1.4.1.33.14.2.4.1.1.2
The address (node or area) to match against learned route entries to decide whether to import the entry to the routing database.
                                         phivCircuitImportAreaMask 1.3.6.1.4.1.33.14.2.4.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
                                         phivCircuitImportAreaAction 1.3.6.1.4.1.33.14.2.4.1.1.4
The action to take if the address field along with the mask field matches the route entry.
                                         phivCircuitImportAreaStatus 1.3.6.1.4.1.33.14.2.4.1.1.5
Setting to invalid removes this import area filter from the table. Setting to valid has no effect.
                             xPhivExport 1.3.6.1.4.1.33.14.2.5
                                 phivCircuitExportTable 1.3.6.1.4.1.33.14.2.5.1
A list of circuit export filter entries.
                                     phivCircuitExportEntry 1.3.6.1.4.1.33.14.2.5.1.1
Parameter values for an export filter.
                                         phivCircuitExportIf 1.3.6.1.4.1.33.14.2.5.1.1.1
The interface associated with the export routing filter.
                                         phivCircuitExportAddr 1.3.6.1.4.1.33.14.2.5.1.1.2
The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database.
                                         phivCircuitExportMask 1.3.6.1.4.1.33.14.2.5.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
                                         phivCircuitExportAction 1.3.6.1.4.1.33.14.2.5.1.1.4
The action to take if the address field along with the mask field matches the route entry.
                                         phivCircuitExportStatus 1.3.6.1.4.1.33.14.2.5.1.1.5
Setting to invalid removes this export filter from the table. Setting to valid has no effect.
                             xPhivExportArea 1.3.6.1.4.1.33.14.2.6
                                 phivCircuitExportAreaTable 1.3.6.1.4.1.33.14.2.6.1
A list of circuit export area filter entries.
                                     phivCircuitExportAreaEntry 1.3.6.1.4.1.33.14.2.6.1.1
Parameter values for an export area filter.
                                         phivCircuitExportAreaIf 1.3.6.1.4.1.33.14.2.6.1.1.1
The interface associated with the export area routing filter.
                                         phivCircuitExportAreaAddr 1.3.6.1.4.1.33.14.2.6.1.1.2
The address (node or area) to match against learned route entries to decide whether to export the entry to the routing database.
                                         phivCircuitExportAreaMask 1.3.6.1.4.1.33.14.2.6.1.1.3
The mask which is ANDed with the address field as well as the route entries address to determine whether the address matches the route entry.
                                         phivCircuitExportAreaAction 1.3.6.1.4.1.33.14.2.6.1.1.4
The action to take if the address field along with the mask field matches the route entry.
                                         phivCircuitExportAreaStatus 1.3.6.1.4.1.33.14.2.6.1.1.5
Setting to invalid removes this export area filter from the table. Setting to valid has no effect.
                             xPhivFilter 1.3.6.1.4.1.33.14.2.7
                                 phivCircuitFilterTable 1.3.6.1.4.1.33.14.2.7.1
A list of circuit filter entries.
                                     phivCircuitFilterEntry 1.3.6.1.4.1.33.14.2.7.1.1
Parameter values for a filter.
                                         phivCircuitFilterIf 1.3.6.1.4.1.33.14.2.7.1.1.1
The interface associated with the filter entry.
                                         phivCircuitFilterDstAddr 1.3.6.1.4.1.33.14.2.7.1.1.2
The address (node or area) to match against the destination address of the packet to decide whether to forward the packet.
                                         phivCircuitFilterDstMask 1.3.6.1.4.1.33.14.2.7.1.1.3
The mask which is ANDed with the destination address field and the packets destination address to determine whether the address matches the packets address.
                                         phivCircuitFilterSrcAddr 1.3.6.1.4.1.33.14.2.7.1.1.4
The address (node or area) to match against the source address of the packet to decide whether to forward the packet.
                                         phivCircuitFilterSrcMask 1.3.6.1.4.1.33.14.2.7.1.1.5
The mask which is ANDed with the source address field and the packets source address to determine whether the address matches the packets address.
                                         phivCircuitFilterAction 1.3.6.1.4.1.33.14.2.7.1.1.6
The action to take if the address fields along with the mask fields match the packet.
                                         phivCircuitFilterStatus 1.3.6.1.4.1.33.14.2.7.1.1.7
Setting to invalid removes this Filter filter from the table. Setting to valid has no effect.
                             xPhivTraffic 1.3.6.1.4.1.33.14.2.8
                                 phivTrafficSort 1.3.6.1.4.1.33.14.2.8.1
Setting to execute causes the most recent traffic information to be sorted into the phivTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to ready has no effect.
                                 phivTrafficTable 1.3.6.1.4.1.33.14.2.8.2
A list of traffic entries, sorted in the order specified by phivTrafficSort.
                                     phivTrafficEntry 1.3.6.1.4.1.33.14.2.8.2.1
A traffic entry.
                                         phivTrafficIndex 1.3.6.1.4.1.33.14.2.8.2.1.1
Identification of this traffic entry.
                                         phivTrafficPercent 1.3.6.1.4.1.33.14.2.8.2.1.2
The percentage of total traffic that this traffic entry represents, in tenths of a percent.
                                         phivTrafficDst 1.3.6.1.4.1.33.14.2.8.2.1.3
The destination to which the traffic entry applies.
                                         phivTrafficSrc 1.3.6.1.4.1.33.14.2.8.2.1.4
The source to which the traffic entry applies.
                                         phivTrafficIf 1.3.6.1.4.1.33.14.2.8.2.1.5
The inbound interface to which the traffic entry applies. This value is the same as IfIndex.
                   xIpx 1.3.6.1.4.1.33.15
                         xIpxSystem 1.3.6.1.4.1.33.15.1
                             ipxRouting 1.3.6.1.4.1.33.15.1.1
Control for IPX routing services.
                             ipxInternalNetwork 1.3.6.1.4.1.33.15.1.2
The IPX Internal Network to use on the the IPX Router.
                         xIpxIf 1.3.6.1.4.1.33.15.2
                             ipxIfTable 1.3.6.1.4.1.33.15.2.1
A list of IPX interface entries.
                                 ipxIfEntry 1.3.6.1.4.1.33.15.2.1.1
IPX interface parameters and counters.
                                     ipxIfIndex 1.3.6.1.4.1.33.15.2.1.1.1
An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                     ipxIfState 1.3.6.1.4.1.33.15.2.1.1.2
Control for IPX routing services for this interface.
                                     ipxIfNetwork 1.3.6.1.4.1.33.15.2.1.1.3
The IPX network number of the network to which this interface is attached.
                                     ipxIfFrameStyle 1.3.6.1.4.1.33.15.2.1.1.4
Control for the CSMA/CD frame style to use on this interface.
                                     ipxIfFramesIn 1.3.6.1.4.1.33.15.2.1.1.5
The number of IPX frames received on this interface.
                                     ipxIfFramesOut 1.3.6.1.4.1.33.15.2.1.1.6
The number of IPX frames sent on this interface.
                                     ipxIfErrors 1.3.6.1.4.1.33.15.2.1.1.7
The number of IPX errors seen on this interface.
                                     ipxIfTransitDelay 1.3.6.1.4.1.33.15.2.1.1.8
The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface. A value of 0 means that the system will calculate this value based on the measured speed of the interface.
                                     ipxIfTransitDelayActual 1.3.6.1.4.1.33.15.2.1.1.9
The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface.
                                     ipxIfProtocolPriority 1.3.6.1.4.1.33.15.2.1.1.10
This value defines the priority at which all Internet Routed packets will be placed on the WAN output queue.
                                     ipxIfWatchdogSpoof 1.3.6.1.4.1.33.15.2.1.1.11
Control for whether or not this router responds to IPX watchog requests on this interface.
                                     ipxIfStatusNetwork 1.3.6.1.4.1.33.15.2.1.1.12
The IPX network number that is actually in use on the attached interface. This value may have been learned via listening to the attached network.
                         xIpxNetbios 1.3.6.1.4.1.33.15.3
                             ipxNetbiosHopLimit 1.3.6.1.4.1.33.15.3.1
Maximum number of hops that an IPX Netbios packet may make.
                             ipxNetbiosIfTable 1.3.6.1.4.1.33.15.3.2
A list of IPX interface entries.
                                 ipxNetbiosIfEntry 1.3.6.1.4.1.33.15.3.2.1
IPX interface parameters and counters.
                                     ipxNetbiosIfIndex 1.3.6.1.4.1.33.15.3.2.1.1
An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                     ipxIfNetbiosForwarding 1.3.6.1.4.1.33.15.3.2.1.2
Control whether Netbios packet will be forwarded in or out on this interface.
                                     ipxIfNetbiosIn 1.3.6.1.4.1.33.15.3.2.1.3
The number of IPX Netbios frames received on this interface.
                                     ipxIfNetbiosOut 1.3.6.1.4.1.33.15.3.2.1.4
The number of IPX Netbios frames sent on this interface.
                         xIpxRip 1.3.6.1.4.1.33.15.4
                             ipxRipIfTable 1.3.6.1.4.1.33.15.4.1
A list of IPX interface entries.
                                 ipxRipIfEntry 1.3.6.1.4.1.33.15.4.1.1
IPX interface parameters and counters.
                                     ipxRipIfIndex 1.3.6.1.4.1.33.15.4.1.1.1
An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                     ipxIfRipBcst 1.3.6.1.4.1.33.15.4.1.1.2
Control whether RIP packets will be broadcasted out this interface.
                                     ipxIfRipBcstDiscardTimeout 1.3.6.1.4.1.33.15.4.1.1.3
The number of seconds to wait before discarding information learned from a RIP broadcast.
                                     ipxIfRipBcstTimer 1.3.6.1.4.1.33.15.4.1.1.4
The number of seconds to wait between sending out RIP broadcasts.
                                     ipxIfRipIn 1.3.6.1.4.1.33.15.4.1.1.5
The number of RIP broadcasts received on this interface.
                                     ipxIfRipOut 1.3.6.1.4.1.33.15.4.1.1.6
The number of RIP broadcasts sent on this interface.
                                     ipxIfRipAgedOut 1.3.6.1.4.1.33.15.4.1.1.7
The number of entries timed out and discarded on this interface.
                             ipxRipTable 1.3.6.1.4.1.33.15.4.2
A list of RIP entries.
                                 ipxRipEntry 1.3.6.1.4.1.33.15.4.2.1
IPX interface parameters and counters.
                                     ipxRipNetwork 1.3.6.1.4.1.33.15.4.2.1.1
An IPX network number to which this router knows a path.
                                     ipxRipRouter 1.3.6.1.4.1.33.15.4.2.1.2
The Ethernet address of an IPX router on this network.
                                     ipxRipInterface 1.3.6.1.4.1.33.15.4.2.1.3
The interface to reach the router. A value of ifIndex.
                                     ipxRipHops 1.3.6.1.4.1.33.15.4.2.1.4
The number of hops to reach the router.
                                     ipxRipTransTime 1.3.6.1.4.1.33.15.4.2.1.5
The number of 55 millisecond ticks it takes for a packet to travel to the router.
                                     ipxRipAge 1.3.6.1.4.1.33.15.4.2.1.6
The age of the RIP entry in seconds.
                             ipxRipRtTable 1.3.6.1.4.1.33.15.4.3
A list of RIP Routing entries.
                                 ipxRipRtEntry 1.3.6.1.4.1.33.15.4.3.1
IPX Routing Entry information
                                     ipxRipRtNetwork 1.3.6.1.4.1.33.15.4.3.1.1
An IPX network number to which this router knows a path.
                                     ipxRipRtRouter 1.3.6.1.4.1.33.15.4.3.1.2
The Ethernet address of an IPX router on this network.
                                     ipxRipRtInterface 1.3.6.1.4.1.33.15.4.3.1.3
The interface to reach the router. A value of ifIndex.
                                     ipxRipRtHops 1.3.6.1.4.1.33.15.4.3.1.4
The number of hops to reach the router.
                                     ipxRipRtTransTime 1.3.6.1.4.1.33.15.4.3.1.5
The number of 55 millisecond ticks it takes for a packet to travel to the router.
                                     ipxRipRtOrigin 1.3.6.1.4.1.33.15.4.3.1.6
The source of the RIP entry, either Learned via RIP or Static.
                                     ipxRipRtRowStatus 1.3.6.1.4.1.33.15.4.3.1.7
Create or Delete RIP routing table entries.
                         xIpxSap 1.3.6.1.4.1.33.15.5
                             ipxSapIfTable 1.3.6.1.4.1.33.15.5.1
A list of IPX interface entries.
                                 ipxSapIfEntry 1.3.6.1.4.1.33.15.5.1.1
IPX interface parameters and counters.
                                     ipxSapIfIndex 1.3.6.1.4.1.33.15.5.1.1.1
An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                     ipxIfSapBcst 1.3.6.1.4.1.33.15.5.1.1.2
Control whether SAP packets will be broadcasted out this interface.
                                     ipxIfSapBcstDiscardTimeout 1.3.6.1.4.1.33.15.5.1.1.3
The number of seconds to wait before discarding information learned from a SAP broadcast.
                                     ipxIfSapBcstTimer 1.3.6.1.4.1.33.15.5.1.1.4
The number of seconds to wait between sending out SAP broadcasts.
                                     ipxIfSapIn 1.3.6.1.4.1.33.15.5.1.1.5
The number SAP broadcasts received on this interface.
                                     ipxIfSapOut 1.3.6.1.4.1.33.15.5.1.1.6
The number SAP broadcasts sent on this interface.
                                     ipxIfSapAgedOut 1.3.6.1.4.1.33.15.5.1.1.7
The number entries for this interface discarded due to aging timeout.
                             ipxSapTable 1.3.6.1.4.1.33.15.5.2
A list of SAP entries.
                                 ipxSapEntry 1.3.6.1.4.1.33.15.5.2.1
IPX interface parameters and counters.
                                     ipxSapName 1.3.6.1.4.1.33.15.5.2.1.1
The name of the service, null filled.
                                     ipxSapNetwork 1.3.6.1.4.1.33.15.5.2.1.2
The IPX network number on which the services host resides.
                                     ipxSapHost 1.3.6.1.4.1.33.15.5.2.1.3
The Ethernet address of the IPX host of the service.
                                     ipxSapSocket 1.3.6.1.4.1.33.15.5.2.1.4
The socket number of the service on the host.
                                     ipxSapInterface 1.3.6.1.4.1.33.15.5.2.1.5
The interface of the router in the direction of the service. A value of ifIndex.
                                     ipxSapType 1.3.6.1.4.1.33.15.5.2.1.6
The type of the service. The enumeration is an incomplete set of all possible values.
                                     ipxSapAge 1.3.6.1.4.1.33.15.5.2.1.7
The age of the Sap entry in seconds.
                             ipxSapSvTable 1.3.6.1.4.1.33.15.5.3
A list of SAP entries.
                                 ipxSapSvEntry 1.3.6.1.4.1.33.15.5.3.1
IPX interface parameters and counters.
                                     ipxSapSvName 1.3.6.1.4.1.33.15.5.3.1.1
The name of the service.
                                     ipxSapSvNetwork 1.3.6.1.4.1.33.15.5.3.1.2
The IPX network number on which the services host resides.
                                     ipxSapSvHost 1.3.6.1.4.1.33.15.5.3.1.3
The Ethernet address of the IPX host of the service.
                                     ipxSapSvSocket 1.3.6.1.4.1.33.15.5.3.1.4
The socket number of the service on the host.
                                     ipxSapSvInterface 1.3.6.1.4.1.33.15.5.3.1.5
The interface of the router in the direction of the service. A value of ifIndex.
                                     ipxSapSvOrigin 1.3.6.1.4.1.33.15.5.3.1.6
The source of the RIP entry, either Learned via RIP or Static.
                                     ipxSapSvType 1.3.6.1.4.1.33.15.5.3.1.7
The type of the service. The enumeration is an incomplete set of all possible values.
                                     ipxSapSvHops 1.3.6.1.4.1.33.15.5.3.1.8
The number of hops to the Service.
                                     ipxSapSvRowStatus 1.3.6.1.4.1.33.15.5.3.1.9
Create or Delete SAP Service table entries.
                                     ipxSapSvAge 1.3.6.1.4.1.33.15.5.3.1.10
The age of the Sap entry in seconds.
                         xIpxFilter 1.3.6.1.4.1.33.15.6
                             ipxIfFilterTable 1.3.6.1.4.1.33.15.6.1
A list of IPX interface Source and Destination address Filter entries.
                                 ipxIfFilterEntry 1.3.6.1.4.1.33.15.6.1.1
IPX Source and Destination interface Filters.
                                     ipxIfFilterIndex 1.3.6.1.4.1.33.15.6.1.1.1
The interface to which this IPX Address filter applies. A value of ifIndex.
                                     ipxIfFilterDestNetwork 1.3.6.1.4.1.33.15.6.1.1.2
The destination IPX network to be filtered.
                                     ipxIfFilterDestNode 1.3.6.1.4.1.33.15.6.1.1.3
The destination IPX node to be filtered.
                                     ipxIfFilterSourceNetwork 1.3.6.1.4.1.33.15.6.1.1.4
The destination IPX network to be filtered.
                                     ipxIfFilterSourceNode 1.3.6.1.4.1.33.15.6.1.1.5
The destination IPX node to be filtered.
                                     ipxIfFilterPacketType 1.3.6.1.4.1.33.15.6.1.1.6
The IPX packet type to be filtered.
                                     ipxIfFilterAction 1.3.6.1.4.1.33.15.6.1.1.7
The IPX filter action to be taken, either Forward or Discard.
                                     ipxIfFilterRowStatus 1.3.6.1.4.1.33.15.6.1.1.8
The IPX Filter create or delete function.
                                     ipxIfFilterStatusDestNetworkAll 1.3.6.1.4.1.33.15.6.1.1.9
The IPX Filter flag meaning ALL destination networks.
                                     ipxIfFilterStatusDestNodeAll 1.3.6.1.4.1.33.15.6.1.1.10
The IPX Filter flag meaning ALL destination nodes.
                                     ipxIfFilterStatusSourceNetworkAll 1.3.6.1.4.1.33.15.6.1.1.11
The IPX Filter flag meaning ALL source networks.
                                     ipxIfFilterStatusSourceNodeAll 1.3.6.1.4.1.33.15.6.1.1.12
The IPX Filter flag meaning ALL source nodes.
                                     ipxIfFilterStatusPacketTypeAll 1.3.6.1.4.1.33.15.6.1.1.13
The IPX Filter flag meaning ALL packet types.
                             ipxIfRipFilterTable 1.3.6.1.4.1.33.15.6.2
A list of IPX interface RIP Filter entries.
                                 ipxIfRipFilterEntry 1.3.6.1.4.1.33.15.6.2.1
IPX RIP interface Filters.
                                     ipxIfRipFilterNetwork 1.3.6.1.4.1.33.15.6.2.1.1
The IPX RIP network to be filtered.
                                     ipxIfRipFilterType 1.3.6.1.4.1.33.15.6.2.1.2
The IPX RIP filter type, either IMPORT or EXPORT.
                                     ipxIfRipFilterAction 1.3.6.1.4.1.33.15.6.2.1.3
The IPX RIP filter action to be taken, either ALLOW or DENY.
                                     ipxIfRipFilterRowStatus 1.3.6.1.4.1.33.15.6.2.1.4
The IPX RIP Filter create or delete function.
                                     ipxIfRipFilterNetworkAll 1.3.6.1.4.1.33.15.6.2.1.5
The IPX RIP Filter flag meaning filter ALL networks.
                                     ipxIfRipFilterHost 1.3.6.1.4.1.33.15.6.2.1.6
The RIP Filter IPX Host Address from which RIP will ALLOW/DENY IMPORT of routes.
                             ipxIfSapFilterTable 1.3.6.1.4.1.33.15.6.3
A list of IPX interface SAP Filter entries.
                                 ipxIfSapFilterEntry 1.3.6.1.4.1.33.15.6.3.1
IPX SAP interface Filters.
                                     ipxIfSapFilterNetwork 1.3.6.1.4.1.33.15.6.3.1.1
The IPX SAP network to be filtered.
                                     ipxIfSapFilterType 1.3.6.1.4.1.33.15.6.3.1.2
The IPX SAP filter type, either IMPORT or EXPORT.
                                     ipxIfSapFilterServiceType 1.3.6.1.4.1.33.15.6.3.1.3
The IPX SAP service type to which this filter applies.
                                     ipxIfSapFilterAction 1.3.6.1.4.1.33.15.6.3.1.4
The IPX SAP filter action to be taken, either ALLOW or DENY.
                                     ipxIfSapFilterRowStatus 1.3.6.1.4.1.33.15.6.3.1.5
The IPX SAP Filter create or delete function.
                                     ipxIfSapFilterNetworkAll 1.3.6.1.4.1.33.15.6.3.1.6
The IPX SAP Filter flag meaning filter ALL networks.
                                     ipxIfSapFilterServiceTypeAll 1.3.6.1.4.1.33.15.6.3.1.7
The IPX SAP Filter flag meaning filter ALL service types.
                                     ipxIfSapFilterName 1.3.6.1.4.1.33.15.6.3.1.8
The name of the service to be filtered.
                                     ipxIfSapFilterHost 1.3.6.1.4.1.33.15.6.3.1.9
The IPX Host address from which SAP will ALLOW/DENY IMPORT of services .
                         xIpxPrinter 1.3.6.1.4.1.33.15.8
                             ipxPrinterPortTable 1.3.6.1.4.1.33.15.8.1
A list of IPX printer character port entries.
                                 ipxPrinterPortEntry 1.3.6.1.4.1.33.15.8.1.1
IPX printer parameter values for a character port.
                                     ipxPrinterPortIndex 1.3.6.1.4.1.33.15.8.1.1.1
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                                     ipxPrinterPortStatus 1.3.6.1.4.1.33.15.8.1.1.2
Status of this entry. Setting the value to invalid invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
                                     ipxPrinterPortServer 1.3.6.1.4.1.33.15.8.1.1.3
The name of an active print server on the network.
                                     ipxPrinterPortPrinter 1.3.6.1.4.1.33.15.8.1.1.4
An available remote printer on ixpPrinterPortServer.
                                     ipxTimeout 1.3.6.1.4.1.33.15.8.1.1.5
A control to set the the time at which a print job from a print server will be timed out and the port freed.
                             ipxPrinterEthernet 1.3.6.1.4.1.33.15.8.2
Control for use of Ethernet-style message framing, with the IPX protocol type. Mutually exclusive with ipxPrinterMac, ipxPrinterMac802_2_Snap, and ipxPrinterMac802_2.
                             ipxPrinterMac 1.3.6.1.4.1.33.15.8.3
Control for use of MAC-only message framing, with no protocol type. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac802_2_Snap, and ipxPrinterMac802_2.
                             ipxPrinterMac802-2 1.3.6.1.4.1.33.15.8.4
Control for use of MAC message framing with 802.2 framing. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac, and ipxPrinterMac802_2_Snap.
                             ipxPrinterMac802-2-Snap 1.3.6.1.4.1.33.15.8.5
Control for use of MAC-only message framing with 802 Snap framing. Mutually exclusive with ipxPrinterEthernet, ipxPrinterMac, and ipxPrinterMac802_2.
                   xChassis 1.3.6.1.4.1.33.16
                         xChassisBasic 1.3.6.1.4.1.33.16.1
                             basicBase802Address 1.3.6.1.4.1.33.16.1.1
Base IEEE 802 global address for the chassis.
                             basicSlot 1.3.6.1.4.1.33.16.1.2
Chassis slot number (slotIndex) of the system whose agent is supplying this MIB.
                             basicSlotNumber 1.3.6.1.4.1.33.16.1.3
Number of slots in the chassis.
                             basicNewBase802Address 1.3.6.1.4.1.33.16.1.4
New base IEEE 802 global address for the chassis. Must be set in conjunction with featType changeEthernetAddress and featKey from the ITouch System MIB.
                         xSegment 1.3.6.1.4.1.33.16.2
                             segmentTable 1.3.6.1.4.1.33.16.2.1
A list of segment entries, one for each segment of each type on the chassis.
                                 segmentEntry 1.3.6.1.4.1.33.16.2.1.1
Values for a chassis segment.
                                     segmentType 1.3.6.1.4.1.33.16.2.1.1.1
The segment type.
                                     segmentIndex 1.3.6.1.4.1.33.16.2.1.1.2
An index value that uniquely identifies a segment.
                         xPort 1.3.6.1.4.1.33.16.3
                             portIOCardType 1.3.6.1.4.1.33.16.3.1
The hardware type of the I/O card in this slot.
                             portIOCardSerialNumber 1.3.6.1.4.1.33.16.3.2
The ITouch serial number of the I/O card in this slot.
                             portIOCardOperStatus 1.3.6.1.4.1.33.16.3.3
Status of the I/O card relative to the function card in this slot.
                             portTable 1.3.6.1.4.1.33.16.3.4
A list of port entries, one for each port of each type on the slots I/O card.
                                 portEntry 1.3.6.1.4.1.33.16.3.4.1
Values for an I/O card port.
                                     portType 1.3.6.1.4.1.33.16.3.4.1.1
The port type.
                                     portIndex 1.3.6.1.4.1.33.16.3.4.1.2
An index value that uniquely identifies a port.
                         xController 1.3.6.1.4.1.33.16.4
                             controllerTable 1.3.6.1.4.1.33.16.4.1
A list of controller entries, one for each controller of each type on the local system.
                                 controllerEntry 1.3.6.1.4.1.33.16.4.1.1
Values for a controller.
                                     controllerType 1.3.6.1.4.1.33.16.4.1.1.1
The controller type.
                                     controllerIndex 1.3.6.1.4.1.33.16.4.1.1.2
An index value that uniquely identifies a controller.
                                     controllerNetwork 1.3.6.1.4.1.33.16.4.1.1.3
The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this controller is to use, that is, segmentType, portType or controllerType.
                         xInterface 1.3.6.1.4.1.33.16.5
                             interfaceTable 1.3.6.1.4.1.33.16.5.1
A list of interface entries, corresponding to the MIB II Interface group. These are directly equivalent to hardware network controllers, and must be the lowest numbered interfaces on the system.
                                 interfaceEntry 1.3.6.1.4.1.33.16.5.1.1
Values for an interface.
                                     interfaceIndex 1.3.6.1.4.1.33.16.5.1.1.1
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                     interfaceNetwork 1.3.6.1.4.1.33.16.5.1.1.2
The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this interface is to use, that is, segmentType, portType, or controllerType.
                         xSlotBootControl 1.3.6.1.4.1.33.16.6
                             slotBootControlTable 1.3.6.1.4.1.33.16.6.1
A list of slot boot control entries.
                                 slotBootControlEntry 1.3.6.1.4.1.33.16.6.1.1
Values for a chassis slot.
                                     slotBootControlSlot 1.3.6.1.4.1.33.16.6.1.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
                                     slotBootControlIndex 1.3.6.1.4.1.33.16.6.1.1.2
An index value that uniquely identifies a boot control entry, from 1 to the number of entries for the slot.
                                     slotBootControlStatus 1.3.6.1.4.1.33.16.6.1.1.3
The status of the entry. Set to disabled to disable the entry.
                                     slotBootControlMopFile 1.3.6.1.4.1.33.16.6.1.1.6
The software file name to request for down-line load of the server via MOP or XMOP.
                                     slotBootControlInternetFile 1.3.6.1.4.1.33.16.6.1.1.7
The filename to request when loading an image via TFTP.
                                     slotBootControlInternetAddress 1.3.6.1.4.1.33.16.6.1.1.8
The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action.
                                     slotBootControlInternetServer 1.3.6.1.4.1.33.16.6.1.1.9
The internet address of the server to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.
                                     slotBootControlInternetGateway 1.3.6.1.4.1.33.16.6.1.1.10
The internet address of the gateway to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.
                                     slotBootControlInternetDelimiter 1.3.6.1.4.1.33.16.6.1.1.11
The character separating the load file directory name from the file name.
                             slotBootControlFlagTable 1.3.6.1.4.1.33.16.6.2
A list of slot boot control source flag entries.
                                 slotBootControlFlagEntry 1.3.6.1.4.1.33.16.6.2.1
Values for a boot control flag.
                                     slotBootControlFlagLoadBootpTftp 1.3.6.1.4.1.33.16.6.2.1.1
Control for performing load over BOOTP/TFTP.
                                     slotBootControlFlagParamBootpTftp 1.3.6.1.4.1.33.16.6.2.1.2
Control for performing parameter load over BOOTP/TFTP.
                                     slotBootControlFlagDumpBootpTftp 1.3.6.1.4.1.33.16.6.2.1.3
Control for performing dump over BOOTP/TFTP.
                                     slotBootControlFlagLoadTftpDirect 1.3.6.1.4.1.33.16.6.2.1.4
Control for performing load over direct TFTP.
                                     slotBootControlFlagParamTftpDirect 1.3.6.1.4.1.33.16.6.2.1.5
Control for performing parameter load over direct TFTP.
                                     slotBootControlFlagDumpTftpDirect 1.3.6.1.4.1.33.16.6.2.1.6
Control for performing dump over direct TFTP.
                                     slotBootControlFlagLoadLocal 1.3.6.1.4.1.33.16.6.2.1.7
Control for performing load from a local device.
                                     slotBootControlFlagParamLocal 1.3.6.1.4.1.33.16.6.2.1.8
Control for performing parameter load from a local device.
                                     slotBootControlFlagDumpLocal 1.3.6.1.4.1.33.16.6.2.1.9
Control for performing dump from a local device.
                                     slotBootControlFlagLoadMop 1.3.6.1.4.1.33.16.6.2.1.10
Control for performing load over Digitals MOP.
                                     slotBootControlFlagParamMop 1.3.6.1.4.1.33.16.6.2.1.11
Control for performing parameter load over Digitals MOP.
                                     slotBootControlFlagDumpMop 1.3.6.1.4.1.33.16.6.2.1.12
Control for performing dump over Digitals MOP.
                                     slotBootControlFlagLoadXmop 1.3.6.1.4.1.33.16.6.2.1.13
Control for performing load over ITouch extended MOP.
                                     slotBootControlFlagParamXmop 1.3.6.1.4.1.33.16.6.2.1.14
Control for performing parameter load over ITouch extended MOP.
                                     slotBootControlFlagDumpXmop 1.3.6.1.4.1.33.16.6.2.1.15
Control for performing dump over ITouch extended MOP.
                                     slotBootControlFlagLoadRarpTftp 1.3.6.1.4.1.33.16.6.2.1.16
Control for performing load over RARP/TFTP.
                                     slotBootControlFlagParamRarpTftp 1.3.6.1.4.1.33.16.6.2.1.17
Control for performing parameter load over RARP/TFTP.
                                     slotBootControlFlagDumpRarpTftp 1.3.6.1.4.1.33.16.6.2.1.18
Control for performing dump over RARP/TFTP.
                             slotBootControlStorageTable 1.3.6.1.4.1.33.16.6.3
A list of slot boot control Storage entries.
                                 slotBootControlStorageEntry 1.3.6.1.4.1.33.16.6.3.1
Values for a chassis slot.
                                     slotBootControlStorageClientSlot 1.3.6.1.4.1.33.16.6.3.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
                                     slotBootControlStorageServerSlot 1.3.6.1.4.1.33.16.6.3.1.2
An index value that uniquely identifies the slot in which the Storage record resides, with the same values as slotIndex.
                                     slotBootControlStorageStatus 1.3.6.1.4.1.33.16.6.3.1.3
The status of the entry.
                                     slotBootControlStorageFailures 1.3.6.1.4.1.33.16.6.3.1.4
The number of times a read from or write to a given Storage location failed
                         xSlot 1.3.6.1.4.1.33.16.7
                             slotTable 1.3.6.1.4.1.33.16.7.1
A list of slot entries.
                                 slotEntry 1.3.6.1.4.1.33.16.7.1.1
Values for a chassis slot.
                                     slotIndex 1.3.6.1.4.1.33.16.7.1.1.1
An index value that uniquely identifies a slot, in the range 0 to basicSlotNumber, where the value 0 indicates the same slot as basicSlot. As the objects found at instance zero are duplicates, that instance does not appear in responses a get-next, that is, the lowest numbered slotIndex returned by get-next is 1.
                                     slotAdminAction 1.3.6.1.4.1.33.16.7.1.1.2
Control to cause reset of the system in a slot. When read, the value is always ready. Setting to reset or resetHold causes a single attempt to take that action, but does not ensure transition to any particular value of slotOperStatus.
                                     slotOperStatus 1.3.6.1.4.1.33.16.7.1.1.3
Relative to the chassis, the current operating status of the system in the slot.
                                     slotSecondsSinceReset 1.3.6.1.4.1.33.16.7.1.1.4
The number of seconds since the system in the slot was last reset by hardware or software.
                                     slotHardwareType 1.3.6.1.4.1.33.16.7.1.1.5
The type of hardware in the slot.
                                     slotHardwareSerialNumber 1.3.6.1.4.1.33.16.7.1.1.6
The ITouch serial number of the function card hardware in this slot.
                                     slotHardwareRevision 1.3.6.1.4.1.33.16.7.1.1.7
This revision level of the function card hardware in the slot.
                                     slotIOCardType 1.3.6.1.4.1.33.16.7.1.1.8
The hardware type of the I/O card in this slot.
                                     slotIOCardSerialNumber 1.3.6.1.4.1.33.16.7.1.1.9
The ITouch serial number of the I/O card in this slot.
                                     slotIOCardOperStatus 1.3.6.1.4.1.33.16.7.1.1.10
Status of the I/O card relative to the function card in this slot.
                                     slotBootstrapFirmwareRevision 1.3.6.1.4.1.33.16.7.1.1.11
The firmware revision level of the bootstrap ROM installed in the system in the slot.
                                     slotElementalFirmwareRevision 1.3.6.1.4.1.33.16.7.1.1.12
The firmware revision level of the minimal function ROM (management bus microprocessor) installed in the system in the slot.
                                     slotMemorySize 1.3.6.1.4.1.33.16.7.1.1.13
The number of bytes of memory installed in the system in the slot.
                                     slotLedNumber 1.3.6.1.4.1.33.16.7.1.1.14
The number of LEDs on the system in the slot. A value of 0 indicates none, unknown, or status not readable.
                                     slotLedStatus 1.3.6.1.4.1.33.16.7.1.1.15
The status of the LEDs displayed on the front and back of the system in the slot. The first bit is the high-order bit of the first byte of the value, proceeding to the low-order bit, then to then next byte. On the system hardware, the first LED is at the top, left, front, proceeding left to right, top to bottom, and front to back.
                                     slotBase802Address 1.3.6.1.4.1.33.16.7.1.1.16
Base IEEE 802 global address for the slot.
                                     slotIpAddress 1.3.6.1.4.1.33.16.7.1.1.17
An internet address to which the system in this slot might respond. May be one of many.
                                     slotPlus5Status 1.3.6.1.4.1.33.16.7.1.1.18
Status of the +5 volt power to the slot.
                                     slotPlus12Status 1.3.6.1.4.1.33.16.7.1.1.19
Status of the +12 volt power to the slot.
                                     slotMinus12Status 1.3.6.1.4.1.33.16.7.1.1.20
Status of the -12 volt power to the slot.
                                     slotPlus5Watts 1.3.6.1.4.1.33.16.7.1.1.21
Tenths of watts of +5 volt power currently drawn by the slot.
                                     slotPlus12Watts 1.3.6.1.4.1.33.16.7.1.1.22
Tenths of watts of +12 volt power currently drawn by the slot.
                                     slotMinus12Watts 1.3.6.1.4.1.33.16.7.1.1.23
Tenths of watts of -12 volt power currently drawn by the slot.
                                     slotIOCardHardwareVersion 1.3.6.1.4.1.33.16.7.1.1.24
Version number of I/O card in the slot.
                                     slotRestoreNVS 1.3.6.1.4.1.33.16.7.1.1.25
Setting to execute causes the non-volatile parameter storage to be restored from an installed memory card. Setting to ready has no effect.
                                     slotDefaultNVS 1.3.6.1.4.1.33.16.7.1.1.26
Setting to execute causes non-volatile stored parameters to be reset to factory defaults. Setting to ready has no effect.
                             slotBootTable 1.3.6.1.4.1.33.16.7.2
A list of slot bootstrap status entries. A given slot has an entry in this table only when slotOperStatus is one of: loadRequested, loading, dumpRequested, dumping, paramRequested, paramLoading
                                 slotBootEntry 1.3.6.1.4.1.33.16.7.2.1
Bootstrap status values for a chassis slot.
                                     slotBootIndex 1.3.6.1.4.1.33.16.7.2.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
                                     slotBootIfIndex 1.3.6.1.4.1.33.16.7.2.1.2
An index value that uniquely identifies the interface in use for bootstrap functions. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                     slotBootNetwork 1.3.6.1.4.1.33.16.7.2.1.3
The instance identifier of the first object in the conceptual row entry for the segment or port this interface is using, that is, segmentType or portType.
                                     slotBootProtocol 1.3.6.1.4.1.33.16.7.2.1.4
The protocol in use for bootstrap operation.
                                     slotBoot802Address 1.3.6.1.4.1.33.16.7.2.1.5
IEEE 802 global address in use for bootstrap operation.
                                     slotBootAddressType 1.3.6.1.4.1.33.16.7.2.1.6
The type of network address contained in slotBootAddress.
                                     slotBootAddress 1.3.6.1.4.1.33.16.7.2.1.7
The network address the system in the slot is using to identify itself for bootstrap operation.
                                     slotBootServerAddressType 1.3.6.1.4.1.33.16.7.2.1.8
The type of network address contained in slotBootServerAddress.
                                     slotBootServerAddress 1.3.6.1.4.1.33.16.7.2.1.9
The network address of the system supplying bootstrap services to the system in the slot.
                                     slotBootGatewayAddress 1.3.6.1.4.1.33.16.7.2.1.10
The internet address of the router in use for bootstrap operation.
                                     slotBootFileName 1.3.6.1.4.1.33.16.7.2.1.11
The full name of the file in use for bootstrap operation.
                                     slotBootBlockNumber 1.3.6.1.4.1.33.16.7.2.1.12
The current block number being transferred for bootstrap operation, zero if unknown or not applicable.
                                     slotBootCrashCode 1.3.6.1.4.1.33.16.7.2.1.13
If slotOperStatus is dumpRequested or dumping, a code number to identify the crash reason; otherwise zero length.
                             slotControllerTable 1.3.6.1.4.1.33.16.7.3
A list of controller entries, one for each controller of each type in each slot.
                                 slotControllerEntry 1.3.6.1.4.1.33.16.7.3.1
Values for a controller.
                                     slotControllerType 1.3.6.1.4.1.33.16.7.3.1.1
The controller type.
                                     slotControllerIndex 1.3.6.1.4.1.33.16.7.3.1.2
An index value that uniquely identifies a controller.
                                     slotControllerNetwork 1.3.6.1.4.1.33.16.7.3.1.3
The instance identifier of the first object in the conceptual row entry for the segment or port this controller is to use, that is, segmentType or portType.
                         xPowerSupply 1.3.6.1.4.1.33.16.8
                             powerSupplyTable 1.3.6.1.4.1.33.16.8.1
A list of power supply entries.
                                 powerSupplyEntry 1.3.6.1.4.1.33.16.8.1.1
Values for a chassis power supply.
                                     powerSupplyIndex 1.3.6.1.4.1.33.16.8.1.1.1
An index value that uniquely identifies a power supply, in the range 1 to the number of power supply slots in the chassis.
                                     powerSupplyAdminAction 1.3.6.1.4.1.33.16.8.1.1.2
Control to cause reset of the power supply. When read, the value is always ready. Setting to reset or resetHold causes a single attempt to take that action, but does not ensure transition to any particular value of powerSupplyRedundancyStatus.
                                     powerSupplyFirmwareVersion 1.3.6.1.4.1.33.16.8.1.1.3
Version number of power supply firmware.
                                     powerSupplyRedundancyStatus 1.3.6.1.4.1.33.16.8.1.1.4
The current redundancy status of the power supply.
                                     powerSupplyPlus5Status 1.3.6.1.4.1.33.16.8.1.1.5
Status of the +5 volt power from the power supply.
                                     powerSupplyPlus12Status 1.3.6.1.4.1.33.16.8.1.1.6
Status of the +12 volt power from the power supply.
                                     powerSupplyMinus12Status 1.3.6.1.4.1.33.16.8.1.1.7
Status of the -12 volt power from the power supply.
                                     powerSupplyThermalWarningStatus 1.3.6.1.4.1.33.16.8.1.1.8
The current thermal warning status of the power supply.
                                     powerSupplyThermalShutdownStatus 1.3.6.1.4.1.33.16.8.1.1.9
The current thermal shutdown status of the power supply.
                                     powerSupplyFanStatus 1.3.6.1.4.1.33.16.8.1.1.10
The current status of the power supplys fan.
                                     powerSupplyHardwareInhibitStatus 1.3.6.1.4.1.33.16.8.1.1.11
The current status of the power supplys hardware inhibit.
                                     powerSupplyPlus5History 1.3.6.1.4.1.33.16.8.1.1.12
History of the +5 volt power from the power supply.
                                     powerSupplyPlus12History 1.3.6.1.4.1.33.16.8.1.1.13
History of the +12 volt power from the power supply.
                                     powerSupplyMinus12History 1.3.6.1.4.1.33.16.8.1.1.14
History of the -12 volt power from the power supply.
                                     powerSupplyThermalWarningHistory 1.3.6.1.4.1.33.16.8.1.1.15
The thermal warning history of the power supply.
                                     powerSupplyThermalShutdownHistory 1.3.6.1.4.1.33.16.8.1.1.16
The thermal shutdown history of the power supply.
                                     powerSupplyFanHistory 1.3.6.1.4.1.33.16.8.1.1.17
The status history of the power supplys fan.
                                     powerSupplyHardwareInhibitHistory 1.3.6.1.4.1.33.16.8.1.1.18
The status history of the power supplys hardware inhibit.
                                     powerSupplyPlus5Volts 1.3.6.1.4.1.33.16.8.1.1.19
In hundredths, volts of +5 volt power currently provided by the power supply. A value of 0 indicates unknown.
                                     powerSupplyPlus12Volts 1.3.6.1.4.1.33.16.8.1.1.20
In hundredths, volts of +12 volt power currently provided by the power supply. A value of 0 indicates unknown.
                                     powerSupplyMinus12Volts 1.3.6.1.4.1.33.16.8.1.1.21
In hundredths, volts of -12 volt power currently provided by the power supply. A value of 0 indicates unknown.
                                     powerSupplyWatts 1.3.6.1.4.1.33.16.8.1.1.22
Watts of power currently drawn from this power supply. A value of 0 indicates unknown.
                                     powerSupplyWattsMax 1.3.6.1.4.1.33.16.8.1.1.23
Maximum watts of power available from this power supply. A value of 0 indicates unknown.
                                     powerSupplyChassisWatts 1.3.6.1.4.1.33.16.8.1.1.24
Total watts of power currently drawn by the entire chassis. A value of 0 indicates unknown.
                                     powerSupplyChassisWattsMax 1.3.6.1.4.1.33.16.8.1.1.25
Total maximum watts of power available from all the power supplies in the chassis. A value of 0 indicates unknown.
                                     powerSupplyHardwareType 1.3.6.1.4.1.33.16.8.1.1.26
The type of power supply.
                         xFirmwareUpdate 1.3.6.1.4.1.33.16.9
                             firmwareUpdateTable 1.3.6.1.4.1.33.16.9.1
Table of descriptive and status information concerning the writing of firmware to a target I/O card.
                                 firmwareUpdateEntry 1.3.6.1.4.1.33.16.9.1.1
An entry in the table concerning the writing of firmware to a target I/O card.
                                     firmwareUpdateSlotIndex 1.3.6.1.4.1.33.16.9.1.1.1
This variable identifies the slot to which is to be the target of the firmware update.
                                     firmwareUpdateDefaultFileName 1.3.6.1.4.1.33.16.9.1.1.2
This variable when read will obtain the default file name from the target.
                                     firmwareUpdateFileName 1.3.6.1.4.1.33.16.9.1.1.3
This variable contains the name of the file to be read from the flash memory card and written to the target.
                                     firmwareUpdateStatus 1.3.6.1.4.1.33.16.9.1.1.4
This variable is used to start the update process. The agent always ready for this value. Setting this value to execute causes the agent to write the file specified by firmwareUpdateFileName to be written to the taget. Setting this value to execute when firmwareUpdateFileName has not been written or when firmwareUpdateState is writing causes bad value to be returned.
                                     firmwareUpdateState 1.3.6.1.4.1.33.16.9.1.1.5
This variable indicates the current state of firmware update, idle indicates that firmware update may be initiated, and writing indicates that an update is in process.
                                     firmwareUpdateCompletionStatus 1.3.6.1.4.1.33.16.9.1.1.6
This variable indicates the completion status of the the last firmware update attempt. none indicates that no firmware update has yet been attempted.
                                     firmwareUpdateMethod 1.3.6.1.4.1.33.16.9.1.1.7
This variable indicates the method of update of the firmware update attempt.
                   xRepeater 1.3.6.1.4.1.33.17
                         xRepeaterInfo 1.3.6.1.4.1.33.17.1
                             repeaterAccessViolation 1.3.6.1.4.1.33.17.1.1
Controls action to take when an access violation occurs.
                             repeaterMyGroup 1.3.6.1.4.1.33.17.1.2
The index value of the group that is directly associated with the agent. The snmp support for the group associated with the agent is a superset of the support for other groups.
                             repeaterFifoOverflows 1.3.6.1.4.1.33.17.1.3
Deprecated, use repeaterRepeaterFifoOverflows in the repeaterRepeater group for the desired repeater.
                             repeaterLEDDisplay 1.3.6.1.4.1.33.17.1.4
Controls reason for flashing front panel LEDs.
                             repeaterReports 1.3.6.1.4.1.33.17.1.5
Deprecated, use repeaterRepeaterReports in the repeaterRepeater group for the desired repeater on which report generation is to be controlled.
                             repeaterHealthTrap 1.3.6.1.4.1.33.17.1.6
Controls the generation of the repeater health trap.
                             repeaterStatusChangeTrap 1.3.6.1.4.1.33.17.1.7
Controls the generation of the repeater status change trap.
                             repeaterAccessViolationTrap 1.3.6.1.4.1.33.17.1.8
Controls the generation of the repeater access violation trap.
                             repeaterIntegrityLossTrap 1.3.6.1.4.1.33.17.1.9
Controls the generation of the repeater integrity loss trap.
                             repeaterRedundancyPathChangeTrap 1.3.6.1.4.1.33.17.1.10
Controls the generation of the repeater redundancy path change trap.
                         xRepeaterGroupInfo 1.3.6.1.4.1.33.17.2
                             repeaterGroupTable 1.3.6.1.4.1.33.17.2.1
Table of descriptive and status information about the groups.
                                 repeaterGroupEntry 1.3.6.1.4.1.33.17.2.1.1
An entry in the table, containing information about a group.
                                     repeaterGroupIndex 1.3.6.1.4.1.33.17.2.1.1.1
This variable identifies the group within the repeater for which this entry contains information. This value is the same as rptrGroupIndex.
                                     repeaterGroupSQE 1.3.6.1.4.1.33.17.2.1.1.2
Deprecated, use repeaterRepeaterSQE in the repeaterRepeaterGroup for the SQE count on the desired repeater. This object will always return the count for repeater #1.
                                     repeaterGroupJabbers 1.3.6.1.4.1.33.17.2.1.1.3
Deprecated, use repeaterRepeaterJabbers in the repeaterRepeaterGroup for the Jabber count on the desired repeater. This object will always return the count for repeater #1.
                                     repeaterGroupSegment 1.3.6.1.4.1.33.17.2.1.1.4
Deprecated, use repeaterRepeaterSegment in the repeaterRepeaterGroup to control the segment mapping for the desired repeater. This object will always control the mapping for repeater #1.
                                     repeaterGroupSecurityLock 1.3.6.1.4.1.33.17.2.1.1.5
This variable indicates the state of security lockdown on an unmanaged repeater. The only writable value is unlocked.
                                     repeaterGroupIOCardType 1.3.6.1.4.1.33.17.2.1.1.6
The hardware type of the I/O card, as defined in ITouch Assigned Numbers.
                                     repeaterGroupIOCardFirmwareVersion 1.3.6.1.4.1.33.17.2.1.1.7
The firmware revision level of the I/O card ROM.
                                     repeaterGroupIOCardOperStatus 1.3.6.1.4.1.33.17.2.1.1.8
Relative to the chassis, the current operating status of the I/O card.
                                     repeaterGroupManagement 1.3.6.1.4.1.33.17.2.1.1.9
This variable indicates the level of management control and observation available.
                                     repeaterGroupRepeaterNumber 1.3.6.1.4.1.33.17.2.1.1.10
The number of logical repeaters visible via this repeater.
                                     repeaterGroupRepeaterHardwareVersion 1.3.6.1.4.1.33.17.2.1.1.11
The repeater chip set hardware revision level.
                                     repeaterGroupManagerRepeater 1.3.6.1.4.1.33.17.2.1.1.12
The logical repeater to which the manager card, if present, is attached.
                                     repeaterGroupFifoErrors 1.3.6.1.4.1.33.17.2.1.1.13
This variable will reflect the number of times that the report FIFO has gone out of synchronization.
                                     repeaterGroupCpuUtilization 1.3.6.1.4.1.33.17.2.1.1.14
The average CPU utilization for the processor which maintains statistics and implements monitoring for the group, expressed as percentage times 100.
                                     repeaterGroupMemoryUtilization 1.3.6.1.4.1.33.17.2.1.1.15
The current memory utilization for the processor which maintains statistics and implements monitoring for the group, expressed as percentage used times 100.
                                     repeaterGroupAlarmCount 1.3.6.1.4.1.33.17.2.1.1.16
The number of alarms currently being monitored by the processor for comparison with RMON thresholds.
                         xRepeaterPortInfo 1.3.6.1.4.1.33.17.3
                             repeaterPortTable 1.3.6.1.4.1.33.17.3.1
Table of descriptive and status information about the ports.
                                 repeaterPortEntry 1.3.6.1.4.1.33.17.3.1.1
An entry in the table, containing information about a port.
                                     repeaterPortGroupIndex 1.3.6.1.4.1.33.17.3.1.1.1
This variable identifies the group containing the port for which this entry contains infromation.
                                     repeaterPortIndex 1.3.6.1.4.1.33.17.3.1.1.2
This variable identifies the port within the group within the repeater for which this entry contains management information. This value can never be greater than rptrGroupPortCapacity for the associated group.
                                     repeaterPortName 1.3.6.1.4.1.33.17.3.1.1.3
The ports display name.
                                     repeaterPortAutoPolarity 1.3.6.1.4.1.33.17.3.1.1.4
Controls whether the port will automatically determine its polarity.
                                     repeaterPortPolarityDirection 1.3.6.1.4.1.33.17.3.1.1.5
If repeaterPortAutoPolarity is enabled, this is the current polarity of the port.
                                     repeaterPortPulse 1.3.6.1.4.1.33.17.3.1.1.6
Controls whether the port will periodically generate a test pulse to determine the status of the port.
                                     repeaterPortPulseStatus 1.3.6.1.4.1.33.17.3.1.1.7
If repeaterPortPulse is enabled, this is indicates whether the test pulse response is being detected.
                                     repeaterPortPulseLosses 1.3.6.1.4.1.33.17.3.1.1.8
The number of times that a test pulse has been sent and a response was not received.
                                     repeaterPortDistance 1.3.6.1.4.1.33.17.3.1.1.9
Controls whether the port will support extended distances on the port.
                                     repeaterPortSofMissing 1.3.6.1.4.1.33.17.3.1.1.10
The number of times that alternating zero/one bits were seen after an inter-packet gap and were not followed by two one bits.
                                     repeaterPortMCVs 1.3.6.1.4.1.33.17.3.1.1.11
The number of manchester violation errors detected on this port.
                                     repeaterPortZero 1.3.6.1.4.1.33.17.3.1.1.12
Control to zero the hub ports counters. The agent always returns ready for this value. Setting the value to ready has no effect.
                                     repeaterPortSinceZero 1.3.6.1.4.1.33.17.3.1.1.13
Number of time ticks since the ports counters were zeroed.
                                     repeaterPortAccessAction 1.3.6.1.4.1.33.17.3.1.1.14
Control whether packets will be accepted or discarded if they are in the access list. The inverse action is applied to packets from all addresses not in the list.
                                     repeaterPortAccessState 1.3.6.1.4.1.33.17.3.1.1.15
Indicates whether the port was disabled due to receiving a frame from an invalid source address.
                                     repeaterPortAccessType 1.3.6.1.4.1.33.17.3.1.1.16
Indicates the type of the port.
                                     repeaterPortAccessAllStatus 1.3.6.1.4.1.33.17.3.1.1.17
Setting this field to invalid will delete all access addresses associated with this port. Setting this field to valid has no effect.
                                     repeaterPortPortLastViolationAddress 1.3.6.1.4.1.33.17.3.1.1.18
Address that last caused an access violation.
                                     repeaterPortPortAddressViolations 1.3.6.1.4.1.33.17.3.1.1.19
Number of access violations.
                                     repeaterPortSegment 1.3.6.1.4.1.33.17.3.1.1.20
Returns the indirect mapping of the ethernet repeater to which this port is connected.
                                     repeaterPortAccessLearn 1.3.6.1.4.1.33.17.3.1.1.21
Controls how the port will learn the source addresses that can come in on the port.
                                     repeaterPortEthernetRepeater 1.3.6.1.4.1.33.17.3.1.1.22
For repeaters that implement non-proxy management of logical repeaters, this variable selects the logical Ethernet repeater to which the port is attached.
                                     repeaterPortRepeatersAllowed 1.3.6.1.4.1.33.17.3.1.1.23
The list of repeaters to which this port can be attached. The OCTET STRING contains a bitmap, with a bit for none and one bit for each repeater, and enough octets for all the repeaters on the device. The high order bit of the first octet corresponds to none, the following bits correspond to the repeaters, in order, beginning with 1.
                                     repeaterPortGlobalSecurityAddress 1.3.6.1.4.1.33.17.3.1.1.24
This variable represents the global address which is currently applied to the port.
                                     repeaterPortGlobalAddressChanges 1.3.6.1.4.1.33.17.3.1.1.25
This variable represents the number of times since counters have been zeroed, that a global address change occured on the port.
                                     repeaterPortPercentUtilization 1.3.6.1.4.1.33.17.3.1.1.26
This variable will reflect the percentage of a full ethernet load that this port has received since last zeroed. The value is calculated as (8(bytesReceived + (20*framesReceived))) /107(time).
                             repeaterPortAccessTable 1.3.6.1.4.1.33.17.3.2
Table of access control for the ports.
                                 repeaterPortAccessEntry 1.3.6.1.4.1.33.17.3.2.1
An entry in the table, containing access information about a port.
                                     repeaterPortAccessGroupIndex 1.3.6.1.4.1.33.17.3.2.1.1
This variable identifies the group containing the access entry for which this entry contains information. The group ID may only be that of the target agent. Specifying a group ID of an agent in a different slot will result in `badValue` being returned.
                                     repeaterPortAccessPortIndex 1.3.6.1.4.1.33.17.3.2.1.2
This variable identifies the port containing the access entry for which this entry contains information.
                                     repeaterPortAccessAddress 1.3.6.1.4.1.33.17.3.2.1.3
This value will be compared to the source address of all packets received on the port in applying the access action
                                     repeaterPortAccessStatus 1.3.6.1.4.1.33.17.3.2.1.4
The status of the entry. Set to invalid to remove the rule.
                             repeaterPortAccessGroupIndexShadow 1.3.6.1.4.1.33.17.3.3
This variable identifies the group which contains a port to which an access address is to be assigned. The group ID may only be that of the target agent. Specifying a group ID of an agent in a different slot will result in `badValue` being returned.
                             repeaterPortAccessPortIndexShadow 1.3.6.1.4.1.33.17.3.4
This variable identifies the port of a group to which an access address is to be assigned.
                             repeaterPortAccessAddressShadow 1.3.6.1.4.1.33.17.3.5
This value contains the ethernet address which is to be added to the access address table for the port specified by repeaterPortAccessGroupIndexShadow and repeaterPortAccessPortIndexShadow.
                             repeaterPortAccessStatusShadow 1.3.6.1.4.1.33.17.3.6
When read, this variable will always return ready. When this variable is set to execute the address specified by repeaterPortAccessAddressShadow will be added to the access address table for the port specified by repeaterPortAccessGroupIndexShadow and repeaterPortAccessPortIndexShadow. If any of the above variables are zero when this object is set to execute, bad value will be returned.
                             repeaterPort2Table 1.3.6.1.4.1.33.17.3.7
Table of more descriptive and status information about the ports.
                                 repeaterPort2Entry 1.3.6.1.4.1.33.17.3.7.1
An entry in the table, containing information about a port. Index is identical to repeaterPortTable.
                                     repeaterPort2RmonOctets 1.3.6.1.4.1.33.17.3.7.1.1
The total number of octets of data (including those in bad packets) received on the port (excluding framing bits but including FCS octets).
                                     repeaterPort2RmonPkts 1.3.6.1.4.1.33.17.3.7.1.2
The total number of packets (including error packets) received on the port.
                                     repeaterPort2RmonBroadcastPkts 1.3.6.1.4.1.33.17.3.7.1.3
The total number of good packets received on the port that were directed to the broadcast address.
                                     repeaterPort2RmonMulticastPkts 1.3.6.1.4.1.33.17.3.7.1.4
The total number of good packets received on the port that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
                                     repeaterPort2RmonCRCAlignErrors 1.3.6.1.4.1.33.17.3.7.1.5
The total number of packets received on the port that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but were not an integral number of octets in length or had a bad Frame Check Sequence (FCS).
                                     repeaterPort2RmonPkts64Octets 1.3.6.1.4.1.33.17.3.7.1.6
The total number of packets (including error packets) received on the port that were 64 octets in length (excluding framing bits but including FCS octets).
                                     repeaterPort2RmonPkts65to127Octets 1.3.6.1.4.1.33.17.3.7.1.7
The total number of packets (including error packets) received on the port that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                                     repeaterPort2RmonPkts128to255Octets 1.3.6.1.4.1.33.17.3.7.1.8
The total number of packets (including error packets) received on the port that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                                     repeaterPort2RmonPkts256to511Octets 1.3.6.1.4.1.33.17.3.7.1.9
The total number of packets (including error packets) received on the port that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                                     repeaterPort2RmonPkts512to1023Octets 1.3.6.1.4.1.33.17.3.7.1.10
The total number of packets (including error packets) received on the port that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                                     repeaterPort2RmonPkts1024to1518Octets 1.3.6.1.4.1.33.17.3.7.1.11
The total number of packets (including error packets) received on the port that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                                     repeaterPort2TrafficRatio 1.3.6.1.4.1.33.17.3.7.1.12
The portion of segment bandwidth used by the port over a 5 second interval, expressed as percentage times 100.
                                     repeaterPort2CollisionRatio 1.3.6.1.4.1.33.17.3.7.1.13
The ratio of collisions the port participated in to total packets over a 5 second interval, expressed as percentage times 100.
                                     repeaterPort2ErrorRatio 1.3.6.1.4.1.33.17.3.7.1.14
The ratio of total number of error frames on the port to total packets over a 5 second interval, expressed as percentage times 100.
                                     repeaterPort2BroadcastRatio 1.3.6.1.4.1.33.17.3.7.1.15
The ratio of good packets directed by the port to the broadcast address to total packets over a 5 second interval, expressed as percentage times 100.
                                     repeaterPort2MulticastRatio 1.3.6.1.4.1.33.17.3.7.1.16
The ratio of good packets directed by the port to any multicast address (but not the broadcast address) to total packets over a 5 second interval, expressed as percentage times 100.
                                     repeaterPort2UnicastRatio 1.3.6.1.4.1.33.17.3.7.1.17
The ratio of good packets directed by the port to any address other than a multicast or broadcast address to total packets over a 5 second interval, expressed as percentage times 100.
                         xRepeaterSlotInfo 1.3.6.1.4.1.33.17.4
                             repeaterSlotSegmentTable 1.3.6.1.4.1.33.17.4.1
Deprecated, no replacement.
                                 repeaterSlotSegmentEntry 1.3.6.1.4.1.33.17.4.1.1
Deprecated, no replacement.
                                     repeaterSlotIndex 1.3.6.1.4.1.33.17.4.1.1.1
Deprecated, no replacement.
                                     repeaterSlotSegment 1.3.6.1.4.1.33.17.4.1.1.2
Deprecated, no replacement.
                                     repeaterSlotSegmentStatus 1.3.6.1.4.1.33.17.4.1.1.3
Deprecated, no replacement.
                         xRepeaterSecurity 1.3.6.1.4.1.33.17.5
                             repeaterSecurityState 1.3.6.1.4.1.33.17.5.1
Controls whether security operation will be applied to all ports on the repeater. If security is not supported by the device, badValue will be returned if the variable is set to enabled.
                             repeaterSecurityPortTable 1.3.6.1.4.1.33.17.5.2
Table of descriptive and status information about the ports.
                                 repeaterSecurityPortEntry 1.3.6.1.4.1.33.17.5.2.1
An entry in the table, containing information about a port.
                                     repeaterSecurityPortUnicast 1.3.6.1.4.1.33.17.5.2.1.1
The action to take when the destination address is unicast and does not have an entry in repeaterSecurityTable. If repeaterPortGroupIndex is equal to the group number of the agent, this object is read-write, otherwise it is read-only.
                                     repeaterSecurityPortMulticast 1.3.6.1.4.1.33.17.5.2.1.2
The action to take when the destination address is multicast and does not have an entry in repeaterSecurityTable. If repeaterPortGroupIndex is equal to the group number of the agent, this object is read-write, otherwise it is read-only
                                     repeaterSecurityPortAllStatus 1.3.6.1.4.1.33.17.5.2.1.3
Setting this field to invalid will delete all security addresses associated with this port. Setting this field to valid has no effect. If repeaterPortGroupIndex is equal to the group number of the agent, this object is read-write, otherwise it is read-only
                                     repeaterSecurityPortSecurityLearn 1.3.6.1.4.1.33.17.5.2.1.4
Controls how the port will learn the destination addresses that can be sent to the port. If repeaterPortGroupIndex is equal to the group number of the agent, this object is read-write, otherwise it is read-only
                             repeaterSecurityTable 1.3.6.1.4.1.33.17.5.3
Table of security control for the ports.
                                 repeaterSecurityEntry 1.3.6.1.4.1.33.17.5.3.1
An entry in the table, containing security information about a port.
                                     repeaterSecurityGroupIndex 1.3.6.1.4.1.33.17.5.3.1.1
This variable identifies the group containing the security entry for which this entry contains information. The group ID may only be that of the target agent. Specifying a group ID of an agent in a different slot will result in `badValue` being returned.
                                     repeaterSecurityPortIndex 1.3.6.1.4.1.33.17.5.3.1.2
This variable identifies the port containing the security entry for which this entry contains infromation.
                                     repeaterSecurityAddress 1.3.6.1.4.1.33.17.5.3.1.3
This value will be compared to the destination address of all packets received on the port in applying the security action.
                                     repeaterSecurityStatus 1.3.6.1.4.1.33.17.5.3.1.4
The status of the entry. Set to invalid to remove the rule.
                                     repeaterSecurityAction 1.3.6.1.4.1.33.17.5.3.1.5
The action to take when the destination address matches.
                             repeaterSecurityGroupIndexShadow 1.3.6.1.4.1.33.17.5.4
This variable identifies the group containing a port to which a security address is to be assigned. The group ID may only be that of the target agent. Specifying a group ID of an agent in a different slot will result in `badValue` being returned.
                             repeaterSecurityPortIndexShadow 1.3.6.1.4.1.33.17.5.5
This variable identifies the port of a group to which a security address is to be assigned.
                             repeaterSecurityAddressShadow 1.3.6.1.4.1.33.17.5.6
This value contains the ethernet address which is to be added to the security address table for the port specified by repeaterSecurityGroupIndexShadow and repeaterSecurityPortIndexShadow.
                             repeaterSecurityStatusShadow 1.3.6.1.4.1.33.17.5.7
When read, this variable will always return ready. When this variable is set to execute the address specified by repeaterSecurityAddressShadow will be added to the security address table for the port specified by repeaterSecurityGroupIndexShadow and repeaterSecurityPortIndexShadow. If any of the above variables are zero when this object is set to execute, bad value will be returned.
                             repeaterSecurityGlobalAddressTable 1.3.6.1.4.1.33.17.5.8
Table of ethernet addresses which are applied globally (intra Network 9000 chassis) to ports.
                                 repeaterSecurityGlobalAddressEntry 1.3.6.1.4.1.33.17.5.8.1
An entry in the table containing information about a specific address.
                                     repeaterSecurityGlobalAddress 1.3.6.1.4.1.33.17.5.8.1.1
This variable identifies the address.
                                     repeaterSecurityGlobalAddressStatus 1.3.6.1.4.1.33.17.5.8.1.2
This variable represents the status of the entry. Setting this object (or any other writable object) to valid will cause the row in the table to be created. Setting this object to invalid will cause the row to be removed.
                                     repeaterSecurityGlobalAddressAction 1.3.6.1.4.1.33.17.5.8.1.3
This variable determines the action which is applied to the packet in the event of an address match. The packet is either passed untouched when set to pass, or it is forced to an alternating pattern of ones and zeros if set to jam.
                             repeaterSecurityGlobalDBID 1.3.6.1.4.1.33.17.5.9
This variable contains the current version number of the global security database.
                             repeaterSecurityGlobalSecurityAdminState 1.3.6.1.4.1.33.17.5.10
This variable controls whether global security is enabled or disabled. Global security will not function unless repeaterSecurityState and this variable are both set to `enabled`.
                             repeaterSecurityGlobalSecurityOperState 1.3.6.1.4.1.33.17.5.11
This variable indicates the operational state of global security. If repeaterSecurityState is set to enabled this variable will reflect the value of repeaterSecurityGlobalSecurityAdminState. if repeaterSecurityState is set to disabled, this variable will return securityDisabled.
                         xRepeaterRepeater 1.3.6.1.4.1.33.17.6
                             repeaterRepeaterTable 1.3.6.1.4.1.33.17.6.1
For repeaters that implement non-proxy management of logical repeaters, a table of descriptive and status information about a logical Ethernet repeater.
                                 repeaterRepeaterEntry 1.3.6.1.4.1.33.17.6.1.1
An entry for a logical Ethernet repeater.
                                     repeaterRepeaterGroupIndex 1.3.6.1.4.1.33.17.6.1.1.1
The slot of the chassis.
                                     repeaterRepeaterIndex 1.3.6.1.4.1.33.17.6.1.1.2
The logical Ethernet repeater within the group.
                                     repeaterRepeaterSegment 1.3.6.1.4.1.33.17.6.1.1.3
The Network 9000 Ethernet network segment to which the logical repeater is attached.
                                     repeaterRepeaterReports 1.3.6.1.4.1.33.17.6.1.1.4
Control for whether statistical reports will be collected for this logical repeater.
                                     repeaterRepeaterCollisions 1.3.6.1.4.1.33.17.6.1.1.5
The number of packet collisions detected on the Ethernet network segment to which this logical repeater is attached.
                                     repeaterRepeaterJabbers 1.3.6.1.4.1.33.17.6.1.1.6
The number of Jabber events detected for this logical repeater.
                                     repeaterRepeaterSQE 1.3.6.1.4.1.33.17.6.1.1.7
The number of SQE failure events detected for this logical repeater.
                                     repeaterRepeaterFifoOverflows 1.3.6.1.4.1.33.17.6.1.1.8
The number of times the report FIFO was full when this logical repeater attemped to write a packet report.
                                     repeaterRepeaterZero 1.3.6.1.4.1.33.17.6.1.1.9
Control for zeroing the logical repeaters counters. The agent always returns ready for this value. Setting the value to ready has no effect. Setting the value to execute will zero the counters for the logical repeater.
                                     repeaterRepeaterSinceZero 1.3.6.1.4.1.33.17.6.1.1.10
The number of hundredths of a second since the counters for this logical repeater were last zeroed. This variable is set to zero when repeaterRepeaterZero is written with the value execute.
                                     repeaterRepeaterSegmentsAllowed 1.3.6.1.4.1.33.17.6.1.1.11
The list of segments to which this repeater can be attached. The OCTET STRING contains a bitmap, with a bit for none and one bit for each segment, and enough octets for all the Ethernet segments in the chassis. The high order bit of the first octet corresponds to none, the following bits correspond to the segments, in order, beginning with A.
                                     repeaterRepeaterTotalOctets 1.3.6.1.4.1.33.17.6.1.1.12
This variable will reflect the total number of bytes that the repeater both received from and sent to the segment. Bytes in both good and error frames are counted.
                                     repeaterRepeaterTotalFrames 1.3.6.1.4.1.33.17.6.1.1.13
This variable will reflect the total number of frames that the repeater both received from and sent to the segment. Both good and error frames are counted.
                                     repeaterRepeaterPercentUtilization 1.3.6.1.4.1.33.17.6.1.1.14
This variable will reflect the percentage of a full ethernet load that this repeater has handled since last zeroed. The value is calculated as `(8(totalBytes + (20*totalFrames)))/10 7(time)`.
                         xRepeaterRedundancy 1.3.6.1.4.1.33.17.7
                             repeaterRedundancyState 1.3.6.1.4.1.33.17.7.1
This variable controls whether hub redundancy is enabled
                             repeaterRedundancyGroupTable 1.3.6.1.4.1.33.17.7.2
Table of descriptive and status information concerning hub redundancy groups.
                                 repeaterRedundancyGroupEntry 1.3.6.1.4.1.33.17.7.2.1
An entry in the table containing information about a specific hub redundancy group.
                                     repeaterRedundancyGroupGroupIndex 1.3.6.1.4.1.33.17.7.2.1.1
This variable identifies the group.
                                     repeaterRedundancyGroupStatus 1.3.6.1.4.1.33.17.7.2.1.2
This variable represents the status of the entry. Setting this object (or any other writable object) to valid will cause the row in the table to be created. Setting this object to invalid will cause the row to be removed. If a row is removed from the group table, all related rows in the path table and address table are also removed.
                                     repeaterRedundancyGroupName 1.3.6.1.4.1.33.17.7.2.1.3
This variable represents the definable name of the group. Prior to being set, this object will return the default name Groupn where n is the value of repeaterRedundancyGroupIndex. Setting this object to a zero length string will cause the default name to be assumed.
                                     repeaterRedundancyGroupAdminState 1.3.6.1.4.1.33.17.7.2.1.4
This variable represents the desired state of the group. When this variable is set to enabled, the group will be activly monitored for integrity, and back- up paths will be brought up as higher priority paths disappear. When set to disabled, the path will not be tested for integrity.
                                     repeaterRedundancyGroupTestInterval 1.3.6.1.4.1.33.17.7.2.1.5
This variable determines the rate at which testing is performed on the path which is currently active (repeaterRedundancyGroupOperPath) in order to determine integrity. The value is in milliseconds.
                                     repeaterRedundancyGroupRollbackAdminState 1.3.6.1.4.1.33.17.7.2.1.6
This variable represents the desired state of path rollback. Path rollback is defined as the automatic testing and reactivation of higher priority paths. It should be noted that in order to test higher priority paths, the currently enabled path will be interrupted. Setting this variable to enabled will cause rollback testing to occur every repeaterRedundancyGroupRollbackInterval number of milliseconds. Setting this variable to disabled will force the group to remain on lower priority paths, until they themselves fail.
                                     repeaterRedundancyGroupRollbackInterval 1.3.6.1.4.1.33.17.7.2.1.7
This variable determines the rate at which rollback testing is performed. The value is in milliseconds.
                                     repeaterRedundancyGroupOperPath 1.3.6.1.4.1.33.17.7.2.1.8
This variable represents the index of the path which is currently being used as the active path. This value may be used as the value for repeaterRedundancyPathIndex to index the path table.
                                     repeaterRedundancyGroupPathChanges 1.3.6.1.4.1.33.17.7.2.1.9
The value of this variable represents the number of times that this group has changed paths.
                                     repeaterRedundancyGroupRollbackAttempts 1.3.6.1.4.1.33.17.7.2.1.10
The value of this variable represents the number of times that the current path has been interrupted in interest of testing a higher priority path.
                                     repeaterRedundancyGroupZero 1.3.6.1.4.1.33.17.7.2.1.11
This variable is used to zero all counters associated with a group. This variable when read will always read ready. When set to execute, all counters associated with the group (group counters and path counters) will be set to zero.
                                     repeaterRedundancyGroupSinceZero 1.3.6.1.4.1.33.17.7.2.1.12
The value of this variable represents the number of seconds which have elapsed since the counters associated with the group have been zeroed.
                                     repeaterRedundancyGroupConfigStatus 1.3.6.1.4.1.33.17.7.2.1.13
In order for a particular redundancy group to be used by the system, it must have at least one redundancy path defined. This variable indicates whether a redundancy group has been completely configured, and can therefore become active.
                             repeaterRedundancyPathTable 1.3.6.1.4.1.33.17.7.3
Table of descriptive and status information concerning hub redundancy paths.
                                 repeaterRedundancyPathEntry 1.3.6.1.4.1.33.17.7.3.1
An entry in the table containing information about a specific hub redundancy path.
                                     repeaterRedundancyPathGroupIndex 1.3.6.1.4.1.33.17.7.3.1.1
This variable identifies the group.
                                     repeaterRedundancyPathPathIndex 1.3.6.1.4.1.33.17.7.3.1.2
This variable identifies the path of the group.
                                     repeaterRedundancyPathStatus 1.3.6.1.4.1.33.17.7.3.1.3
This variable represents the status of the entry. Setting this object (or any other writable object) to valid will cause the row in the table to be created. Setting this object to invalid will cause the row to be removed. If a row is removed from the path table, all related rows in the address table are also removed.
                                     repeaterRedundancyPathSlot 1.3.6.1.4.1.33.17.7.3.1.4
This variable represents the slot of the Network 9000 chassis which contains the repeater on which the path interface resides.
                                     repeaterRedundancyPathPort 1.3.6.1.4.1.33.17.7.3.1.5
This variable represents the port of the repeater to which the path is connected.
                                     repeaterRedundancyPathPriority 1.3.6.1.4.1.33.17.7.3.1.6
This variable represents the order of preferred priority for the path. Lower numbed paths are preferred over higher numbered paths.
                                     repeaterRedundancyPathActivate 1.3.6.1.4.1.33.17.7.3.1.7
This variable is used to immediately make a specific path active. This variable when read will always read ready. When set to execute, the selected path will become the active path for the group. Note that if rollback is enabled and this path is lower in priority, the system will attempt to restore the higher priority path.
                                     repeaterRedundancyPathTimeout 1.3.6.1.4.1.33.17.7.3.1.8
This variable represents the amount of time in milliseconds that the syatem will wait for test responses from targets on the path.
                                     repeaterRedundancyPathRetryCount 1.3.6.1.4.1.33.17.7.3.1.9
This variable represents the number of times a test is retried on the path in the event of a timeout before the path is considered useless.
                                     repeaterRedundancyPathTestAttempts 1.3.6.1.4.1.33.17.7.3.1.10
The value of this variable represents the number of times that an integrity test was performed on the path.
                                     repeaterRedundancyPathLastTestStatus 1.3.6.1.4.1.33.17.7.3.1.11
This variable indicates the result of the last test of the path. notTested indicates that the path has yet to be tested. responded indicates that a target on the path path has responded to the last test, timeout indicates that no target on the path responded to the last test. integrity indicates that a test was not performed on the path due to an abscense of port integrity.
                                     repeaterRedundancyPathDisposition 1.3.6.1.4.1.33.17.7.3.1.12
This variable controls the action that will be taken when a path is considered bad. disable indicates that the path is to be disabled prior to switching to an alternate path. null indicates that the failed path is to be left in its current state prior to switching to an alternate path.
                                     repeaterRedundancyPathConfigStatus 1.3.6.1.4.1.33.17.7.3.1.13
In order for a particular redundancy path to be used by the system, it must have at least one target address and the slot and the port on which it originates defined. This variable indicates whether a redundancy path has been completely configured, and can therefore become active.
                                     repeaterRedundancyPathAdminState 1.3.6.1.4.1.33.17.7.3.1.14
This variable represents the desired state of the path. When this variable is set to disabled the path will not be used by the group. When set to enabled, the path is available as an alternate or primary path.
                             repeaterRedundancyAddressTable 1.3.6.1.4.1.33.17.7.4
Table of descriptive and status information concerning hub redundancy target addresses.
                                 repeaterRedundancyAddressEntry 1.3.6.1.4.1.33.17.7.4.1
An entry in the table containing information about a specific target address associated with a hub redundancy path.
                                     repeaterRedundancyAddressGroupIndex 1.3.6.1.4.1.33.17.7.4.1.1
This variable identifies the group.
                                     repeaterRedundancyAddressPathIndex 1.3.6.1.4.1.33.17.7.4.1.2
This variable identifies the path of the group.
                                     repeaterRedundancyAddressAddress 1.3.6.1.4.1.33.17.7.4.1.3
This variable identifies the specific target address.
                                     repeaterRedundancyAddressStatus 1.3.6.1.4.1.33.17.7.4.1.4
This variable represents the status of the entry. Setting this object (or any other writable object) to valid will cause the row in the table to be created. Setting this object to invalid will cause the row to be removed.
                                     repeaterRedundancyAddressResponses 1.3.6.1.4.1.33.17.7.4.1.5
This value of this variable represents the number of times this specific address has responded to a test attempt.
                                     repeaterRedundancyAddressLastTestStatus 1.3.6.1.4.1.33.17.7.4.1.6
This variable indicates whether this particular address responded to the last test of the path. notTested indicates that the path has yet to be tested. responded indicates that the target responded to the last test, timeout indicates that the target responded to the last test.
                   xBridge 1.3.6.1.4.1.33.19
                         xBridgeSystem 1.3.6.1.4.1.33.19.1
                             bridgeState 1.3.6.1.4.1.33.19.1.1
Controls whether the bridge will perform bridging.
                             bridgeEarlyLoopState 1.3.6.1.4.1.33.19.1.2
Controls whether the bridge will implement the early loop detection algorithm of restarting the Spanning Tree Protocol when a packet is received from a source on one interface when the source was learned on a different interface.
                             bridgeEarlyLoopCount 1.3.6.1.4.1.33.19.1.3
The number of times that an early loop was detected while the early loop state was enabled.
                             bridgeEarlyLoopAddress 1.3.6.1.4.1.33.19.1.4
The last address to cause an early loop to be detected while the early loop state was enabled.
                             bridgeSpanningTreeState 1.3.6.1.4.1.33.19.1.5
Controls whether the bridge will run the Spanning Tree Protocol.
                             bridgeFilterDiscardTimeout 1.3.6.1.4.1.33.19.1.6
The number of seconds before an inactive filter is deleted. Learned filters become inactive when the use timeout (dot1dTpAgingTime) has been exceeded.
                             bridgeTopologyState 1.3.6.1.4.1.33.19.1.7
Indicates whether the Spanning Tree Protocols topology is stable or changing.
                             bridgeTopologyChangeAddr 1.3.6.1.4.1.33.19.1.8
The ethernet address of the last bridge from which a Topology Change Notification packet was received.
                         xBridgeProtocol 1.3.6.1.4.1.33.19.3
                             bridgeProtocolFilterState 1.3.6.1.4.1.33.19.3.1
Controls whether protocol filtering is active.
                             bridgeProtocolDefaultPriority 1.3.6.1.4.1.33.19.3.2
Controls the default priority if no entry exists for the protocol.
                             bridgeProtocolTable 1.3.6.1.4.1.33.19.3.3
A list of bridge protocol filters.
                                 bridgeProtocolEntry 1.3.6.1.4.1.33.19.3.3.1
Bridge protocol filter entry.
                                     bridgeProtocolProtocol 1.3.6.1.4.1.33.19.3.3.1.1
The protocol type associated with the entry. The value 65536 is for all 802.3 MAC frames.
                                     bridgeProtocolName 1.3.6.1.4.1.33.19.3.3.1.2
The name associated with the protocol.
                                     bridgeProtocolPriority 1.3.6.1.4.1.33.19.3.3.1.3
The priority or action to take with the protocol.
                                     bridgeProtocolUses 1.3.6.1.4.1.33.19.3.3.1.4
The number of times the filter has been used.
                                     bridgeProtocolStatus 1.3.6.1.4.1.33.19.3.3.1.5
The status of the protocol entry. Set to invalid to remove the entry.
                         xBridgeFilter 1.3.6.1.4.1.33.19.4
                             bridgeFilterTable 1.3.6.1.4.1.33.19.4.1
A list of bridge filters.
                                 bridgeFilterEntry 1.3.6.1.4.1.33.19.4.1.1
Bridge filter entry.
                                     bridgeFilterForwardSubPort 1.3.6.1.4.1.33.19.4.1.1.1
The unique identifier from which the address has been seen within the port. It is the DLCI for frame relay or VC for X25.
                                     bridgeFilterUses 1.3.6.1.4.1.33.19.4.1.1.2
The number of times the filter has been used for forwarding packets.
                                     bridgeFilterAge 1.3.6.1.4.1.33.19.4.1.1.3
The number of seconds that a learned filter has been active or inactive. This value has no meaning for non-learned filters.
                             bridgeFilterLinkTable 1.3.6.1.4.1.33.19.4.2
Bridge filtering characteristics of all links.
                                 bridgeFilterLinkEntry 1.3.6.1.4.1.33.19.4.2.1
Bridge filtering characteristics of a specific link.
                                     bridgeFilterLinkOverflowCam 1.3.6.1.4.1.33.19.4.2.1.1
Identifies the number of extra entries in a hardware assist filter CAM that the user wants to have available to cover CAM entry overflow conditions. If filtering hardware is present, this field defaults to 400. Otherwise, it is zero.
                   xX25 1.3.6.1.4.1.33.20
                         xX25ChannelTable 1.3.6.1.4.1.33.20.4
Entries of xX25Channel Table.
                             xX25ChannelEntry 1.3.6.1.4.1.33.20.4.1
Entries of xX25ChannelTable.
                                 xX25ChannelIndex 1.3.6.1.4.1.33.20.4.1.1
The ifIndex value for the X.25 physical link.
                                 xX25ChannelLowPVC 1.3.6.1.4.1.33.20.4.1.2
Lowest PVC channel. Setting it to zero indicates none, and will also set the xX25ChannelHighPVC to zero. If set to a non-zero value and xX25ChannelHighPVC is zero, xX25ChannelHighPVC will be set to the same value. Otherwise, xX25ChannelLowPVC must be less than or equal to xX25ChannelHighPVC.
                                 xX25ChannelHighPVC 1.3.6.1.4.1.33.20.4.1.3
Highest PVC channel. Setting it to 0 indicates none, and will also set the xX25ChannelLowPVC to 0. If set to a non-zero value and xX25ChannelLowPVC is zero, xX25ChannelLowPVC will be set to the same value. Otherwise, xX25ChannelHighPVC must be less than or equal to xX25ChannelLowPVC.
                                 xX25ChannelNetwork 1.3.6.1.4.1.33.20.4.1.4
The type of network being run.
                                 xX25ChannelMaxPrecedence 1.3.6.1.4.1.33.20.4.1.5
The maximum level of IP precedence supported.
                                 xX25ChannelStdVersion 1.3.6.1.4.1.33.20.4.1.6
The standard year supported by x25. Values are usually 1980 or 1984 (the default).
                         xX25VcCfgTable 1.3.6.1.4.1.33.20.6
These objects contain information about the virtual circuit configuration in an X.25 PLE. These values are the configured values for circuits that may or may not be connected. Unconfigured calls may be added to this table as calls are accepted.
                             xX25VcCfgEntry 1.3.6.1.4.1.33.20.6.1
Entries of the xX25VcCfgTable.
                                 xX25VcCfgIndex 1.3.6.1.4.1.33.20.6.1.1
An arbitrary index value for the virtual circuit.
                                 xX25VcCfgPartnerAddr 1.3.6.1.4.1.33.20.6.1.2
Partners X.121 Address.
                                 xX25VcCfgInterfaceIndex 1.3.6.1.4.1.33.20.6.1.3
ifIndex of ITouch logical interface associated with this VC.
                                 xX25VcCfgLinkIndex 1.3.6.1.4.1.33.20.6.1.4
ifIndex of physical link on which this VC resides.
                                 xX25VcCfgProtocol 1.3.6.1.4.1.33.20.6.1.5
Protocol which is being encapsulated by this VC.
                                 xX25VcCfgEncapsulation 1.3.6.1.4.1.33.20.6.1.6
Encapsulation method used by this VC.
                                 xX25VcCfgPvc 1.3.6.1.4.1.33.20.6.1.7
Channel number if VC is a PVC, else 0. The value must be in the range of xX25ChannelLowPVC to xX25ChannelHighPVC
                                 xX25VcCfgPartnerIpAddress 1.3.6.1.4.1.33.20.6.1.8
IP address of the partner over this VC. This must be configured if IP packets will not be MAC-encapsulated.
                                 xX25VcCfgClearFacilities 1.3.6.1.4.1.33.20.6.1.9
Control to clear the VC call facilities string. In response to a get-request or get-next-request, the agent always returns ready for this value. Setting the value to ready has no effect. Setting it to execute causes the string to be cleared.
                                 xX25VcCfgStatus 1.3.6.1.4.1.33.20.6.1.10
Setting to invalid removes this VC from the table. If valid, setting to valid has no effect, otherwise it creates an entry.
                         xX25LinkTable 1.3.6.1.4.1.33.20.7
These objects contain information about the configuration of the X.25 physical links necessary for the ITouch Bridge/Router. Unless otherwise noted, changes to these objects require that the X.25 physical link be restarted in order for the changes to take effect.
                             xX25LinkEntry 1.3.6.1.4.1.33.20.7.1
Entries of the xX25LinkTable.
                                 xX25LinkIndex 1.3.6.1.4.1.33.20.7.1.1
The ifIndex value for a ITouch physical link.
                                 xX25LinkRRDelay 1.3.6.1.4.1.33.20.7.1.2
Number of packets received before an RR will be sent. The value must be less than the xX25CallParmInWindowSize. Modifying this object does not require the X.25 physical link to be restarted. 0 indicates that RR will not be sent.
                                 xX25LinkIdleTimeout 1.3.6.1.4.1.33.20.7.1.3
Length of time in minutes that a virtual circuit may be idle before the circuit will be cleared. Modifying this object does not require the X.25 physical link to be restarted.
                                 xX25LinkHoldDownTimer 1.3.6.1.4.1.33.20.7.1.4
Length of time in minutes after a virtual circuit has been cleared before it may make a call again. Modifying this object does not require the X.25 physical link to be restarted.
                                 xX25LinkAccUncfgCalls 1.3.6.1.4.1.33.20.7.1.5
Indicates whether unconfigured, non-reverse charged calls will be accepted. Modifying this object does not require the X.25 physical link to be restarted.
                                 xX25LinkDefWindSize 1.3.6.1.4.1.33.20.7.1.6
Default packet level window size for this link.
                                 xX25LinkMaxWindSize 1.3.6.1.4.1.33.20.7.1.7
Maximum packet level window size for this link.
                                 xX25LinkDefPktSize 1.3.6.1.4.1.33.20.7.1.8
Default packet size for this link.
                                 xX25LinkDefThrptClassIn 1.3.6.1.4.1.33.20.7.1.9
Default input throughput class for this link.
                                 xX25LinkDefThrptClassOut 1.3.6.1.4.1.33.20.7.1.10
Default output throughput class for this link.
                                 xX25LinkDefThrptClassInMsk 1.3.6.1.4.1.33.20.7.1.11
Default incoming throughput class mask for this link.
                                 xX25LinkDefThrptClassOutMsk 1.3.6.1.4.1.33.20.7.1.12
Default outgoing throughput class mask for this link.
                                 xX25LinkFlowCtrlNeg 1.3.6.1.4.1.33.20.7.1.13
Indicates whether flow control negotiation will be performed on this link.
                                 xX25LinkThrptClassNeg 1.3.6.1.4.1.33.20.7.1.14
Indicates whether throughput class negotiation will be performed on this link.
                                 xX25LinkICallBarred 1.3.6.1.4.1.33.20.7.1.15
Indicates whether incoming calls are barred on this link.
                                 xX25LinkOCallBarred 1.3.6.1.4.1.33.20.7.1.16
Indicates whether outgoing calls are barred on this link.
                                 xX25LinkOneOut 1.3.6.1.4.1.33.20.7.1.17
Indicates whether the link supports one way outgoing channels.
                                 xX25LinkOneIn 1.3.6.1.4.1.33.20.7.1.18
Indicates whether the link supports one way incoming channels.
                                 xX25LinkRevChargeAcc 1.3.6.1.4.1.33.20.7.1.19
Indicates whether reverse charge acceptance may be configured on this link.
                                 xX25LinkLocalChargePrevent 1.3.6.1.4.1.33.20.7.1.20
Indicates whether local charge prevention may be configured on the link.
                                 xX25LinkRpoa 1.3.6.1.4.1.33.20.7.1.21
Indicates whether RPOA may be configured on the link.
                                 xX25LinkNui 1.3.6.1.4.1.33.20.7.1.22
Indicates whether NUI may be configured on the link.
                                 xX25LinkMaxPacketSize 1.3.6.1.4.1.33.20.7.1.23
Maximum size of packets on the link.
                                 xX25LinkInsertCallingAddr 1.3.6.1.4.1.33.20.7.1.24
Indicates whether the callers X.121 address should be inserted into the the call request packet.
                                 xX25LinkDefaultInterface 1.3.6.1.4.1.33.20.7.1.25
The ITouch logical ifIndex to which new SVCs should be attached, when accept unconfigured calls is enabled. A value of zero means create a new interface.
                   xApple 1.3.6.1.4.1.33.21
                         xAppleSystem 1.3.6.1.4.1.33.21.1
                             appleState 1.3.6.1.4.1.33.21.1.1
Controls whether the router will perform AppleTalk routing.
                             appleStatus 1.3.6.1.4.1.33.21.1.2
Indicates whether the router is performing AppleTalk routing.
                             appleStatusIf 1.3.6.1.4.1.33.21.1.3
The ifIndex of the bad interface if appleStatus is badConfig.
                         xApplePort 1.3.6.1.4.1.33.21.2
                             applePortTable 1.3.6.1.4.1.33.21.2.1
Table of fields indexed by interface.
                                 applePortEntry 1.3.6.1.4.1.33.21.2.1.1
A particular entry.
                                     applePortIndex 1.3.6.1.4.1.33.21.2.1.1.1
The index of the interface; same as IfIndex.
                                     applePortProtocolPriority 1.3.6.1.4.1.33.21.2.1.1.2
This value defines the priority at which all Apple routed packets will be placed on the WAN output queue.
                                     applePortArpInterval 1.3.6.1.4.1.33.21.2.1.1.3
The interval at which ARP messages should be sent during the process of selecting a network address.
                                     applePortArpRetransmitCount 1.3.6.1.4.1.33.21.2.1.1.4
The number of ARP messages that should be sent during the process of selecting a network address.
                                     applePortChecksum 1.3.6.1.4.1.33.21.2.1.1.5
Controls whether checksums are generated on all DDP packets sent out the interface.
                                     applePortPacketsIn 1.3.6.1.4.1.33.21.2.1.1.6
The number of AppleTalk packets received on this interface.
                                     applePortPacketsOut 1.3.6.1.4.1.33.21.2.1.1.7
The number of AppleTalk packets transmitted on this interface.
                                     applePortForwardsIn 1.3.6.1.4.1.33.21.2.1.1.8
The number of AppleTalk packets received on this interface which were not addressed to this router.
                                     applePortForwardsOut 1.3.6.1.4.1.33.21.2.1.1.9
The number of AppleTalk packets transmitted on this interface which were not originated by this router.
                                     applePortNetAddress 1.3.6.1.4.1.33.21.2.1.1.10
The actual address used by this port.
                                     applePortNetStart 1.3.6.1.4.1.33.21.2.1.1.11
The start of the actual network range used by this port.
                                     applePortNetEnd 1.3.6.1.4.1.33.21.2.1.1.12
The end of the actual network range used by this port.
                                     applePortErrors 1.3.6.1.4.1.33.21.2.1.1.13
The number of AppleTalk packets received in error.
                                     applePortLastError 1.3.6.1.4.1.33.21.2.1.1.14
The type of the most recent error counted in applePortErrors. A value of zero means no error.
                                     applePortLastErrorTime 1.3.6.1.4.1.33.21.2.1.1.15
The value of sysUptime when applePortLastError last occured.
                                     applePortLastErrorData 1.3.6.1.4.1.33.21.2.1.1.16
The first 22 bytes of the packet from applePortLastError.
                                     applePortBringBackTime 1.3.6.1.4.1.33.21.2.1.1.17
The number of seconds to shut down an interface while waiting for a manager-initiated configuration change to propagate.
                                     applePortUseNeighborNotify 1.3.6.1.4.1.33.21.2.1.1.18
Controls generation of neighbor notify messages when an interface is disabled or system is shut down.
                                     applePortRouterType 1.3.6.1.4.1.33.21.2.1.1.19
Type of router operation over this port.
                             applePortZoneTable 1.3.6.1.4.1.33.21.2.2
Table of fields indexed by interface and zone.
                                 applePortZoneEntry 1.3.6.1.4.1.33.21.2.2.1
A particular entry.
                                     applePortZoneIndex 1.3.6.1.4.1.33.21.2.2.1.1
The index of the interface; same as IfIndex.
                                     applePortZoneName 1.3.6.1.4.1.33.21.2.2.1.2
The name of the zone.
                                     applePortZoneStatus 1.3.6.1.4.1.33.21.2.2.1.3
The status of the entry. Set to invalid to remove the entry.
                         xApplePolicy 1.3.6.1.4.1.33.21.3
                             applePortExportTable 1.3.6.1.4.1.33.21.3.1
Table of fields indexed by interface and zone.
                                 applePortExportEntry 1.3.6.1.4.1.33.21.3.1.1
A particular entry.
                                     applePortExportIndex 1.3.6.1.4.1.33.21.3.1.1.1
The index of the interface; same as IfIndex.
                                     applePortExportZone 1.3.6.1.4.1.33.21.3.1.1.2
The name of the zone.
                                     applePortExportName 1.3.6.1.4.1.33.21.3.1.1.3
The name of the name.
                                     applePortExportType 1.3.6.1.4.1.33.21.3.1.1.4
The name of the type.
                                     applePortExportAction 1.3.6.1.4.1.33.21.3.1.1.5
Control whether the data will be hidden or advertised.
                                     applePortExportStatus 1.3.6.1.4.1.33.21.3.1.1.6
The status of the entry. Set to invalid to remove the entry.
                             applePortImportTable 1.3.6.1.4.1.33.21.3.2
Table of fields indexed by interface and zone.
                                 applePortImportEntry 1.3.6.1.4.1.33.21.3.2.1
A particular entry.
                                     applePortImportIndex 1.3.6.1.4.1.33.21.3.2.1.1
The index of the interface; same as IfIndex.
                                     applePortImportZone 1.3.6.1.4.1.33.21.3.2.1.2
The name of the zone.
                                     applePortImportName 1.3.6.1.4.1.33.21.3.2.1.3
The name of the name.
                                     applePortImportType 1.3.6.1.4.1.33.21.3.2.1.4
The name of the type.
                                     applePortImportAction 1.3.6.1.4.1.33.21.3.2.1.5
Control whether the data will be discarded or accepted.
                                     applePortImportStatus 1.3.6.1.4.1.33.21.3.2.1.6
The status of the entry. Set to invalid to remove the entry.
                         xAppleNbp 1.3.6.1.4.1.33.21.4
                             appleNbpTable 1.3.6.1.4.1.33.21.4.1
Table of fields indexed by interface and zone.
                                 appleNbpEntry 1.3.6.1.4.1.33.21.4.1.1
A particular entry.
                                     appleNbpZone 1.3.6.1.4.1.33.21.4.1.1.1
The name of the zone.
                                     appleNbpName 1.3.6.1.4.1.33.21.4.1.1.2
The name of the name.
                                     appleNbpType 1.3.6.1.4.1.33.21.4.1.1.3
The name of the type.
                                     appleNbpNode 1.3.6.1.4.1.33.21.4.1.1.4
The address of the node who offers the service associated with this entry.
                                     appleNbpSocket 1.3.6.1.4.1.33.21.4.1.1.5
The socket of the service associated with this entry. The value 0 means no socket.
                         xAppleTraffic 1.3.6.1.4.1.33.21.5
                             appleTrafficSort 1.3.6.1.4.1.33.21.5.1
Setting to EXECUTE causes the most recent traffic information to be sorted into the appleTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to READY has no effect.
                             appleTrafficTable 1.3.6.1.4.1.33.21.5.2
A list of traffic entries, sorted in the order specified by appleTrafficSort.
                                 appleTrafficEntry 1.3.6.1.4.1.33.21.5.2.1
Parameter values for an Filter filter.
                                     appleTrafficIndex 1.3.6.1.4.1.33.21.5.2.1.1
Identification of a traffic entry.
                                     appleTrafficPercent 1.3.6.1.4.1.33.21.5.2.1.2
The percent of total traffic that this traffic entryrepresents, in tenths of a percent.
                                     appleTrafficDst 1.3.6.1.4.1.33.21.5.2.1.3
The destination to which the traffic entry applies.
                                     appleTrafficSrc 1.3.6.1.4.1.33.21.5.2.1.4
The source to which the traffic entry applies.
                                     appleTrafficIntf 1.3.6.1.4.1.33.21.5.2.1.5
The inbound interface to which the traffic entry applies.
                             appleTrafficMonitoring 1.3.6.1.4.1.33.21.5.3
Controls whether internet traffic information will be recorded.
                         xAppleRemoteAccess 1.3.6.1.4.1.33.21.6
                             arapPassword 1.3.6.1.4.1.33.21.6.1
The servers ARAP password. To increase security, Gets of this object return the NULL string.
                             arapDefaultZoneName 1.3.6.1.4.1.33.21.6.2
The name of the AppleTalk zone that the server should try to choose at boot time.
                             arapPortTable 1.3.6.1.4.1.33.21.6.3
A list of ARAP port entries.
                                 arapPortEntry 1.3.6.1.4.1.33.21.6.3.1
ARAP parameter values for a port.
                                     arapPortEnabled 1.3.6.1.4.1.33.21.6.3.1.1
Indicates if ARAP connections are allowed on this port.
                                     arapPortZoneAccess 1.3.6.1.4.1.33.21.6.3.1.2
Indicates the AppleTalk zones that ARAP connections on this port may access: none, local, all, or named zone.
                                     arapPortZoneName 1.3.6.1.4.1.33.21.6.3.1.3
If this ports arapPortZoneAccess field indicates a named zone, this field contains the zone name.
                                     arapPortMaxConnectTime 1.3.6.1.4.1.33.21.6.3.1.4
Maximum number of minutes a single ARAP connection may exist on the port before a server initiated disconnect. To set no limit on the amount of time that an ARAP user may be connected, set this object to -1.
                                     arapPortGuestLoginsOk 1.3.6.1.4.1.33.21.6.3.1.5
Indicates if Guest logins (with no password) are allowed on the port.
                                     arapPortTimeConnected 1.3.6.1.4.1.33.21.6.3.1.6
Indicates the number of minutes the current ARAP connection has been established on the port, rounded up to the nearest minute. Gets return -1 if no ARAP user is currently connected on the port or if ARAP is not enabled on the port.
                                     arapPortTimeRemaining 1.3.6.1.4.1.33.21.6.3.1.7
Indicates the number of minutes the current ARAP connection may remain on the port before a server initiated disconnect will occur, rounded up to the nearest minute. To set no limit on the amount of time that the current ARAP user may continue to be connected, set this object to the maximum value in the range. Gets return -1 if no ARAP user is currently connected on the port or if ARAP is not enabled on the port. Gets also return -1 if there is a user connected and there is no limit on the amount of time that the current user may be connected.
                   xFrameRelay 1.3.6.1.4.1.33.23
                         xFrCircuitTable 1.3.6.1.4.1.33.23.1
A table containing iTouch extensions to the standard Frame Relay Circuit table.
                             xFrCircuitEntry 1.3.6.1.4.1.33.23.1.1
Entry parameters.
                                 xFrCircuitIf 1.3.6.1.4.1.33.23.1.1.1
The ifIndex value of the corresponding ifEntry, that is, the interface to which the DLCI is attached.
                   xLink 1.3.6.1.4.1.33.24
                         xLinkBasic 1.3.6.1.4.1.33.24.1
                             linkTable 1.3.6.1.4.1.33.24.1.1
A list of links.
                                 linkEntry 1.3.6.1.4.1.33.24.1.1.1
Link entry.
                                     linkNoBuffers 1.3.6.1.4.1.33.24.1.1.1.1
The number of packets discarded because of lack of buffers.
                                     linkDelayExceeded 1.3.6.1.4.1.33.24.1.1.1.2
The number of packets discarded because they were held to long.
                                     linkOutputQFull 1.3.6.1.4.1.33.24.1.1.1.3
The number of packets discarded because the output queue was full.
                                     linkDownTime 1.3.6.1.4.1.33.24.1.1.1.4
Total number of seconds that the link has been down.
                                     linkDownCount 1.3.6.1.4.1.33.24.1.1.1.5
Number of times that the link has been down.
                                     linkDownLastStart 1.3.6.1.4.1.33.24.1.1.1.6
Value of sysUpTime when the link last went down. If the link is up the value is 0.
                                     linkStatus 1.3.6.1.4.1.33.24.1.1.1.7
The status of the link
                                     linkLostBuffers 1.3.6.1.4.1.33.24.1.1.1.8
Number of packets discarded because of lost buffers
                             linkResourceTable 1.3.6.1.4.1.33.24.1.2
A list of link resources.
                                 linkResourceEntry 1.3.6.1.4.1.33.24.1.2.1
link entry.
                                     linkResourceType 1.3.6.1.4.1.33.24.1.2.1.1
The resource type.
                                     linkResourceCurrent 1.3.6.1.4.1.33.24.1.2.1.2
The current percent of the resource used.
                                     linkResourceHigh 1.3.6.1.4.1.33.24.1.2.1.3
The highest percent of the resource used.
                                     linkResourceAverage 1.3.6.1.4.1.33.24.1.2.1.4
The average percent of the resource used.
                         xWan 1.3.6.1.4.1.33.24.3
                             wanTable 1.3.6.1.4.1.33.24.3.1
A list of WANs.
                                 wanEntry 1.3.6.1.4.1.33.24.3.1.1
WAN entry.
                                     wanProtocol 1.3.6.1.4.1.33.24.3.1.1.1
Controls the protocol run on the link, changes ifType, typically to other.
                                     wanCompressionAdminStatus 1.3.6.1.4.1.33.24.3.1.1.2
Controls whether link compression will be run if the link is running the xyplex protocol. Auto will enable compression for links slower than 67000.
                                     wanMaxForwardDelay 1.3.6.1.4.1.33.24.3.1.1.3
The number of milliseconds that a packet may be held on the Wan link before it will be discarded. The value 0 indicates no limit.
                                     wanMaxMultiForwardDelay 1.3.6.1.4.1.33.24.3.1.1.4
The number of milliseconds that a multicast packet may be held on the Wan link before it will be discarded. The value 0 indicates no delay.
                                     wanAdminSpeed 1.3.6.1.4.1.33.24.3.1.1.5
The speed that the software should use for the wan link. The value 0 indicates that the measured speed should be used.
                                     wanCompressionOperStatus 1.3.6.1.4.1.33.24.3.1.1.6
If the link is running the Xyplex protocol, indicates whether link compression is running.
                   xConcentrator 1.3.6.1.4.1.33.25
                         concentratorMode 1.3.6.1.4.1.33.25.1
This variable controls the ring mode of the chassis.
                         concentratorManagement 1.3.6.1.4.1.33.25.2
This variable controls the ability to manage token ring concentrators.
                         concentratorBuildTopology 1.3.6.1.4.1.33.25.3
This variable causes the chassis token ring topology database to be constructed.
                         concentratorTopologyLastBuild 1.3.6.1.4.1.33.25.4
This variable contains the value of sysUpTime at the time the chassis token ring topology database was last constructed.
                         concentratorChassisRingDefaults 1.3.6.1.4.1.33.25.5
This variable causes the chassis ring area of NVS to be set to defaults.
                         concentratorSlotTable 1.3.6.1.4.1.33.25.6
Table of descriptive and status information about a Token Ring Concentrator.
                             concentratorSlotEntry 1.3.6.1.4.1.33.25.6.1
An entry in the table containing information about a specific concentrator.
                                 concentratorSlotIndex 1.3.6.1.4.1.33.25.6.1.1
This variable identifies the slot of the chassis.
                                 concentratorSlotIOType 1.3.6.1.4.1.33.25.6.1.2
This variable represents the type of the I/O card.
                                 concentratorSlotIOFirmwareVersion 1.3.6.1.4.1.33.25.6.1.3
This variable represents the revision level of the firmware on the I/O card.
                                 concentratorSlotIOOperStatus 1.3.6.1.4.1.33.25.6.1.4
This variable represents the current operating status of the I/O card.
                                 concentratorSlotUptime 1.3.6.1.4.1.33.25.6.1.5
This variable contains the value of sysUpTime at the time the concentrator was last reset.
                                 concentratorSlotNumPorts 1.3.6.1.4.1.33.25.6.1.6
This variable represents the number of Token Ring ports supported by the concentrator.
                         concentratorSlotRingTable 1.3.6.1.4.1.33.25.7
Table of descriptive and status information about the rings of a controller.
                             concentratorSlotRingEntry 1.3.6.1.4.1.33.25.7.1
An entry in the table containing information about a specific ring.
                                 concentratorSlotSlotIndex 1.3.6.1.4.1.33.25.7.1.1
This variable identifies the slot of the chassis.
                                 concentratorSlotRingIndex 1.3.6.1.4.1.33.25.7.1.2
This variable identifies the ring within the slot.
                                 concentratorSlotRingAdminName 1.3.6.1.4.1.33.25.7.1.3
This variable represents the user defined name of the ring.
                                 concentratorSlotRingAdminSpeed 1.3.6.1.4.1.33.25.7.1.4
This variable represents the user defined speed of the ring.
                                 concentratorSlotRingAdminState 1.3.6.1.4.1.33.25.7.1.5
This variable defines whether the slot ring is to be inserted into the defined chassis ring or is to be isolated.
                                 concentratorSlotRingZero 1.3.6.1.4.1.33.25.7.1.6
This variable is used to control the slot rings counters. The agent always returns ready for this value. Setting the value to ready has no effect.
                                 concentratorSlotRingSinceZero 1.3.6.1.4.1.33.25.7.1.7
This variable reflects the number of time ticks since the counters were last zeroed. This variable is set to zero when concentratoSlotRingZero is written with the value 2
                                 concentratorSlotRingChassisRing 1.3.6.1.4.1.33.25.7.1.8
This variable represents the chassis ring into which the slot ring is to be inserted if it is to be inserted.
                                 concentratorSlotRingOperName 1.3.6.1.4.1.33.25.7.1.9
This variable represents the name currently being used to identify the slot ring. If inserted, this name will be the user defined name of the chassis ring into which it is inserted. If isolated, this name will be the user defined name of the slot ring.
                                 concentratorSlotRingOperSpeed 1.3.6.1.4.1.33.25.7.1.10
This variable represents the current speed of the slot ring. If inserted, this speed will be the user defined speed of the chassis ring into which it is inserted. If isolated, this speed will be the user defined speed of the slot ring.
                                 concentratorSlotRingOperState 1.3.6.1.4.1.33.25.7.1.11
This variable indicates whether the slot ring is inserted into the defined chassis ring or is isolated.
                                 concentratorSlotRingChassisRingsAllowed 1.3.6.1.4.1.33.25.7.1.12
The list of chassis rings into which this slot ring may be inserted. The OCTET STRING contains a bit map, with a bit for none (indicating it may be isolated) and one bit for each chassis ring, and enough octets for all chassis rings. The high order bit of the first octet corresponds to none and each subsequent bit in ascending order corresponds to the chassis rings in order beginning with A.
                         concentratorChassisRingTable 1.3.6.1.4.1.33.25.8
Table of descriptive and status information about the rings of a the chassis.
                             concentratorChassisRingEntry 1.3.6.1.4.1.33.25.8.1
An entry in the table containing information about a specific ring.
                                 concentratorChassisRingIndex 1.3.6.1.4.1.33.25.8.1.1
This variable identifies the ring of the chassis.
                                 concentratorChassisRingName 1.3.6.1.4.1.33.25.8.1.2
This variable represents the name of the ring. All segments of a given chassis ring will have the same base name, All segment of that ring will appear as baseNamex where x is the identified segment
                                 concentratorChassisRingSpeed 1.3.6.1.4.1.33.25.8.1.3
This variable indicates the speed of the ring segment. All segments of a given chassis ring are at the same speed.
                                 concentratorChassisRingTopologyChanges 1.3.6.1.4.1.33.25.8.1.4
This variable reflects the number of times the topology has changed for this ring. This variable is set to zero when concentratorChassisRingZero is written with the value 2.
                                 concentratorChassisRingZero 1.3.6.1.4.1.33.25.8.1.5
This variable is used to control the rings counters. The agent always returns ready for this value. Setting the value to ready has no effect.
                                 concentratorChassisRingSinceZero 1.3.6.1.4.1.33.25.8.1.6
This variable reflects the number of time ticks since the counters were last zeroed. This variable is set to zero when concentratoChassisRingZero is written with the value 2
                         concentratorChassisRingTopologyTable 1.3.6.1.4.1.33.25.9
Table of descriptive and status information about the segments of the chassis rings.
                             concentratorChassisRingTopologyEntry 1.3.6.1.4.1.33.25.9.1
An entry in the table containing information about a specific ring segment.
                                 concentratorChassisRingTopologySlotIndex 1.3.6.1.4.1.33.25.9.1.1
This variable identifies a slot number that is included in the ring segment.
                                 concentratorChassisRingTopologyRingIndex 1.3.6.1.4.1.33.25.9.1.2
This variable identifies the ring of the chassis.
                                 concentratorChassisRingTopologyWrapUp 1.3.6.1.4.1.33.25.9.1.3
This variable represents the upper wrap state for the chassis ring which passes through this slot. By setting this variable to Wrap, the user can create a segment which would contain this slot, and all slots above this one which are on the same segment.
                                 concentratorChassisRingTopologyWrapDown 1.3.6.1.4.1.33.25.9.1.4
This variable represents the lower wrap state for the chassis ring which passes through this slot. By setting this variable to Wrap, the user can create a segment which would contain this slot, and all slots below this one which are on the same segment.
                                 concentratorChassisRingTopologyUpState 1.3.6.1.4.1.33.25.9.1.5
This variable represents the type of upper wrap for the chassis ring which passes through this slot.
                                 concentratorChassisRingTopologyDownState 1.3.6.1.4.1.33.25.9.1.6
This variable represents the type of lower wrap for the chassis ring which passes through this slot.
                                 concentratorChassisRingTopologySegment 1.3.6.1.4.1.33.25.9.1.7
This variable represents the segment number for the chassis ring which passes through this slot.
                                 concentratorChassisRingTopologyName 1.3.6.1.4.1.33.25.9.1.8
This variable represents the name of the ring segment. The ring segment name is the base ring name with -segment number appended to the end.
                                 concentratorChassisRingTopologySpeed 1.3.6.1.4.1.33.25.9.1.9
This variable indicates the speed of the ring segment. All segments of a given chassis ring are at the same speed as the parent ring.
                                 concentratorChassisRingTopologyCardType 1.3.6.1.4.1.33.25.9.1.10
This variable represents the type of the I/O card.
                                 concentratorChassisRingTopologyAutoUpChanges 1.3.6.1.4.1.33.25.9.1.11
This variable reflects the number of times the topology has changed for this ring due to a dynamic wrap up. This variable is set to zero when concentratorSlotRingZero is written with the value 2.
                                 concentratorChassisRingTopologyAutoDownChanges 1.3.6.1.4.1.33.25.9.1.12
This variable reflects the number of times the topology has changed for this ring due to a dynamic wrap down. This variable is set to zero when concentratorSlotRingZero is written with the value 2.
                         concentratorPortTable 1.3.6.1.4.1.33.25.10
Table of information and status concerning the ports of a concentrator.
                               concentratorPortEntry 1.3.6.1.4.1.33.25.10.1
An entry in the table containing control and status information for a port.
                                   concentratorPortSlotIndex 1.3.6.1.4.1.33.25.10.1.1
This variable identifies the slot of the chassis.
                                   concentratorPortIndex 1.3.6.1.4.1.33.25.10.1.2
This variable identifies target port.
                                   concentratorPortName 1.3.6.1.4.1.33.25.10.1.3
This variable represents the user defined name of the port.
                                   concentratorPortType 1.3.6.1.4.1.33.25.10.1.4
This variable represents the type of connector provided for the port.
                                   concentratorPortZero 1.3.6.1.4.1.33.25.10.1.5
This variable is used to control the ports counters. The agent always returns ready for this value. Setting the value to ready has no effect.
                                   concentratorPortSinceZero 1.3.6.1.4.1.33.25.10.1.6
This variable reflects the number of time ticks since the counters were las zeroed. This variable is set to zero when concentratorPortZero is written with the value 2
                                   concentratorPortAdminState 1.3.6.1.4.1.33.25.10.1.7
This variable reflects the enable/disable state of the port.
                                   concentratorPortOperState 1.3.6.1.4.1.33.25.10.1.8
This variable reflects the enable/disable state of the port.
                                   concentratorPortInsertions 1.3.6.1.4.1.33.25.10.1.9
This variable reflects the number of times the port was inserted into the ring.
                                   concentratorPortInsertFailures 1.3.6.1.4.1.33.25.10.1.10
This variable reflects the number of times the port was not inserted due to a data rate mismatch.
                                   concentratorPortAdminInsert 1.3.6.1.4.1.33.25.10.1.11
This variable reflects the desired insertion of the port. Auto indicates to insert the port into the first slot ring with a matching data rate beginning with 1.
                                   concentratorPortOperInsert 1.3.6.1.4.1.33.25.10.1.12
This variable reflects the slot ring to which the port is attached.
                                   concentratorPortSpeed 1.3.6.1.4.1.33.25.10.1.13
This variable reflects the measured speed of the port.
                                   concentratorPortAdminLoopback 1.3.6.1.4.1.33.25.10.1.14
This variable reflects the whether this port will be inserted into a ring or the data loop backed.
                                   concentratorPortStationType 1.3.6.1.4.1.33.25.10.1.15
This variable reflects the concentrator port type.
                                   concentratorPortAdminTrunkInsert 1.3.6.1.4.1.33.25.10.1.16
This variable is used to control the insertion of trunk ports. When set to execute the trunk port will be inserted into the ring immediately and not wait for the trunk timer to expire. The agent always returns ready for this value. Setting the value to ready has no effect.
                                   concentratorPortSlotRingsAllowed 1.3.6.1.4.1.33.25.10.1.17
The list of slot rings into which this port may be inserted. The OCTET STRING contains a bit map, with a bit for none (indicating it may be isolated) and one bit for each slot ring, and enough octets for all slot rings. The high order bit of the first octet corresponds to none and each subsequent bit in ascending order corresponds to the slot rings in order beginning with 1.
                   xIsis 1.3.6.1.4.1.33.26
                         xIsisSystem 1.3.6.1.4.1.33.26.1
                             xIsisSysTable 1.3.6.1.4.1.33.26.1.1
The set of instances of the Integrated IS-IS protocol existing on the system.
                                 xIsisSysEntry 1.3.6.1.4.1.33.26.1.1.1
Each row defines information specific to a single instance of the protocol existing on the system.
                                     xIsisSysInstance 1.3.6.1.4.1.33.26.1.1.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                                     xIsisSysExistState 1.3.6.1.4.1.33.26.1.1.1.2
The validity of this instance of the Integrated IS-IS protocol. This object follows the existenceState behaviour.
                                     xIsisSysVersion 1.3.6.1.4.1.33.26.1.1.1.3
The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid.
                                     xIsisSysType 1.3.6.1.4.1.33.26.1.1.1.4
The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour.
                                     xIsisSysNET 1.3.6.1.4.1.33.26.1.1.1.5
The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instances area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write access, others may require the value to be set manually.
                                     xIsisSysMaxPathSplits 1.3.6.1.4.1.33.26.1.1.1.6
Maximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour.
                                     xIsisSysMinLSPTransInt 1.3.6.1.4.1.33.26.1.1.1.7
Minimum interval, in seconds, between re-transmission of an LSP. This object follows the resettingTimer behaviour.
                                     xIsisSysMaxLSPGenInt 1.3.6.1.4.1.33.26.1.1.1.8
Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour.
                                     xIsisSysMinBroadLSPTransInt 1.3.6.1.4.1.33.26.1.1.1.9
Minimum interval, in milliseconds, between transmission of LSPs on a broadcast circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds.
                                     xIsisSysCompSNPInt 1.3.6.1.4.1.33.26.1.1.1.10
Interval, in seconds, between generation of Complete Sequence Numbers PDUs by a designated Intermediate System on a broadcast circuit. This object follows the resettingTimer behaviour.
                                     xIsisSysOrigL1LSPBuffSize 1.3.6.1.4.1.33.26.1.1.1.11
The maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour.
                                     xIsisSysMaxAreaAddr 1.3.6.1.4.1.33.26.1.1.1.12
The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.
                                     xIsisSysMinLSPGenInt 1.3.6.1.4.1.33.26.1.1.1.13
Minimum interval, in seconds, between successive generation of LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
                                     xIsisSysPollESHelloRate 1.3.6.1.4.1.33.26.1.1.1.14
The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.
                                     xIsisSysPartSNPInt 1.3.6.1.4.1.33.26.1.1.1.15
Minimum interval between sending Partial Sequence Number PDUs. This object follows the resettingTimer behaviour.
                                     xIsisSysWaitTime 1.3.6.1.4.1.33.26.1.1.1.16
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour.
                                     xIsisSysDRISISHelloTimer 1.3.6.1.4.1.33.26.1.1.1.17
The interval, in seconds, between the generation of IIH PDUs by the designated IS on a LAN. This object follows the resettingTimer behaviour.
                                     xIsisSysOperState 1.3.6.1.4.1.33.26.1.1.1.18
The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol.
                                     xIsisSysL1State 1.3.6.1.4.1.33.26.1.1.1.19
The state of the Level 1 database.
                                     xIsisSysCorrLSPs 1.3.6.1.4.1.33.26.1.1.1.20
Number of corrupted LSPs detected.
                                     xIsisSysL1LSPDbaseOloads 1.3.6.1.4.1.33.26.1.1.1.21
Number of times the LSP L1 database has become overloaded.
                                     xIsisSysManAddrsDropFromArea 1.3.6.1.4.1.33.26.1.1.1.22
Number of times a manual address has been dropped from the area.
                                     xIsisSysAttmptsToExMaxSeqNum 1.3.6.1.4.1.33.26.1.1.1.23
Number of times the IS has attempted to exceed the maximum sequence number.
                                     xIsisSysSeqNumSkips 1.3.6.1.4.1.33.26.1.1.1.24
Number of times a sequence number skip has occurred.
                                     xIsisSysOwnLSPPurges 1.3.6.1.4.1.33.26.1.1.1.25
Number of times a zero-aged copy of the systems own LSP is received from some other node.
                                     xIsisSysIDFieldLenMismatches 1.3.6.1.4.1.33.26.1.1.1.26
Number of times a PDU is received with a different value for ID field length to that of the receiving system.
                                     xIsisSysMaxAreaMis 1.3.6.1.4.1.33.26.1.1.1.27
Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.
                                     xIsisSysOrigL2LSPBuffSize 1.3.6.1.4.1.33.26.1.1.1.28
The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.
                                     xIsisSysL2State 1.3.6.1.4.1.33.26.1.1.1.29
The state of the Level 2 database.
                                     xIsisSysL2LSPDbaseOloads 1.3.6.1.4.1.33.26.1.1.1.30
Number of times the Level 2 LSP database has become overloaded.
                                     xIsisSysMaxAreaCheck 1.3.6.1.4.1.33.26.1.1.1.31
When on, enables checking of maximum area addresses per IS version of ISO10589.
                             xIsisManAreaAddrTable 1.3.6.1.4.1.33.26.1.2
The set of manual area addresses configured on this Intermediate System.
                                 xIsisManAreaAddrEntry 1.3.6.1.4.1.33.26.1.2.1
Each entry contains one area address manually configured on this system
                                     xIsisManAreaAddrSysInstance 1.3.6.1.4.1.33.26.1.2.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                                     xIsisManAreaAddr 1.3.6.1.4.1.33.26.1.2.1.2
A manually configured area address for this system. This object follows the index behaviour.
                                     xIsisManAreaAddrExistState 1.3.6.1.4.1.33.26.1.2.1.3
The state of the xIsisManAreaAddrEntry. This object follows the ExistenceState behaviour. If an attempt is made to set this object to the value off when the corresponding xIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding ISIS instance has xIsisSysOperState set to On then the attempt is rejected.
                             xIsisAreaAddrTable 1.3.6.1.4.1.33.26.1.3
The union of the sets of area addresses reported in all Level 1 LSPs received by this instance of the protocol.
                                 xIsisAreaAddrEntry 1.3.6.1.4.1.33.26.1.3.1
Each entry contains one area address reported in a Level 1 LSP received by this instance of the protocol.
                                     xIsisAreaAddrSysInstance 1.3.6.1.4.1.33.26.1.3.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
                                     xIsisAreaAddr 1.3.6.1.4.1.33.26.1.3.1.2
An area address reported in a Level 1 LSP received by this instance of the protocol.
                             xIsisSysProtSuppTable 1.3.6.1.4.1.33.26.1.4
This table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol.
                                 xIsisSysProtSuppEntry 1.3.6.1.4.1.33.26.1.4.1
Each entry contains one protocol supported by an instance of the Integrated ISIS protocol.
                                     xIsisSysProtSuppSysInstance 1.3.6.1.4.1.33.26.1.4.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                                     xIsisSysProtSuppProtocol 1.3.6.1.4.1.33.26.1.4.1.2
One supported protocol. This object follows the index behaviour.
                                     xIsisSysProtSuppExistState 1.3.6.1.4.1.33.26.1.4.1.3
The state of the xIsisSysProtSuppEntry. This object follows the ExistenceState and ReplaceOnlyWhileInstanceDisabled behaviours.
                         xIsisCirc 1.3.6.1.4.1.33.26.2
                             xIsisCircTable 1.3.6.1.4.1.33.26.2.1
The table of circuits used by each instance of Integrated IS-IS on this system.
                                 xIsisCircEntry 1.3.6.1.4.1.33.26.2.1.1
An xIsisCircEntry exists for each circuit used by Integrated IS-IS on this system.
                                     xIsisCircSysInstance 1.3.6.1.4.1.33.26.2.1.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
                                     xIsisCircIndex 1.3.6.1.4.1.33.26.2.1.1.2
The identifier of this circuit, unique within the instance of the protocol. This object follows the index behaviour.
                                     xIsisCircIfIndex 1.3.6.1.4.1.33.26.2.1.1.3
The value of ifIndex for the interface to which this circuit corresponds. This object follows the replaceOnlyWhileDisabled behaviour.
                                     xIsisCircOperState 1.3.6.1.4.1.33.26.2.1.1.4
The operational state of the circuit. This object follows the operationalState behaviour.
                                     xIsisCircExistState 1.3.6.1.4.1.33.26.2.1.1.5
The existence state of this circuit. This object follows the ExistenceState behaviour.
                                     xIsisCircType 1.3.6.1.4.1.33.26.2.1.1.6
The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of xIsisCircIfIndex.
                                     xIsisCircHelloTimer 1.3.6.1.4.1.33.26.2.1.1.7
The period, in seconds, between IIH PDUs. It is also used as the period between ISH PDUs when polling the ES configuration. This object follows the resettingTimer behaviour.
                                     xIsisCircL1DefaultMetric 1.3.6.1.4.1.33.26.2.1.1.8
The default metric value of this circuit for Level 1 traffic. 0 means the IS will automatically generate Level 1 default metric for the circuit.
                                     xIsisCircL1DelayMetric 1.3.6.1.4.1.33.26.2.1.1.9
The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
                                     xIsisCircL1ExpenseMetric 1.3.6.1.4.1.33.26.2.1.1.10
The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
                                     xIsisCircL1ErrorMetric 1.3.6.1.4.1.33.26.2.1.1.11
The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
                                     xIsisCircExtDomain 1.3.6.1.4.1.33.26.2.1.1.12
If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit.
                                     xIsisCircAdjChanges 1.3.6.1.4.1.33.26.2.1.1.13
The number of times an adjacency state change has occurred on this circuit.
                                     xIsisCircInitFails 1.3.6.1.4.1.33.26.2.1.1.14
The number of times initialization of this circuit has failed.
                                     xIsisCircRejAdjs 1.3.6.1.4.1.33.26.2.1.1.15
The number of times an adjacency has been rejected on this circuit.
                                     xIsisCircOutCtrlPDUs 1.3.6.1.4.1.33.26.2.1.1.16
The number of IS-IS control PDUs sent on this circuit.
                                     xIsisCircInCtrlPDUs 1.3.6.1.4.1.33.26.2.1.1.17
The number of IS-IS control PDUs received on this circuit.
                                     xIsisCircIDFieldLenMismatches 1.3.6.1.4.1.33.26.2.1.1.18
The number of times an IS-IS control PDU with an ID field length different to that for this system has been received.
                                     xIsisCircL2DefaultMetric 1.3.6.1.4.1.33.26.2.1.1.20
The default metric value of this circuit for level 2 traffic. 0 means the IS will automatically generate the Level 2 default metric for this circuit.
                                     xIsisCircL2DelayMetric 1.3.6.1.4.1.33.26.2.1.1.21
The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
                                     xIsisCircL2ExpenseMetric 1.3.6.1.4.1.33.26.2.1.1.22
The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
                                     xIsisCircL2ErrorMetric 1.3.6.1.4.1.33.26.2.1.1.23
The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
                                     xIsisCircManL2Only 1.3.6.1.4.1.33.26.2.1.1.24
When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour.
                                     xIsisCircL1ISPriority 1.3.6.1.4.1.33.26.2.1.1.25
The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit.
                                     xIsisCircL1CircID 1.3.6.1.4.1.33.26.2.1.1.26
The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
                                     xIsisCircL1DesIS 1.3.6.1.4.1.33.26.2.1.1.27
The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
                                     xIsisCircLANL1DesISChanges 1.3.6.1.4.1.33.26.2.1.1.28
The number of times the LAN Level 1 Designated Intermediate System has changed.
                                     xIsisCircL2ISPriority 1.3.6.1.4.1.33.26.2.1.1.29
The priority for becoming LAN level 2 Designated Intermediate System.
                                     xIsisCircL2CircID 1.3.6.1.4.1.33.26.2.1.1.30
The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.
                                     xIsisCircL2DesIS 1.3.6.1.4.1.33.26.2.1.1.31
The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.
                                     xIsisCircLANL2DesISChanges 1.3.6.1.4.1.33.26.2.1.1.32
The number of times the LAN Level 2 Designated Intermediate System has changed.
                             xIsisCircISTable 1.3.6.1.4.1.33.26.2.2
The set of objects controlling the operation of the IS functions of the ES-IS protocol (ISO 9542) on each circuit over which ISIS is run.
                                 xIsisCircISEntry 1.3.6.1.4.1.33.26.2.2.1
Each entry contains objects controlling the operation of the IS functions of the ES-IS protocol (ISO 9542) on one circuit.
                                     xIsisCircISSysInstance 1.3.6.1.4.1.33.26.2.2.1.1
The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.
                                     xIsisCircISIndex 1.3.6.1.4.1.33.26.2.2.1.2
The unique identifier of this row. This value is the same as the value of the ifIndex object which identifies the interface which corresponds to this circuit. This object follows the index behaviour.
                                     xIsisCircISExistState 1.3.6.1.4.1.33.26.2.2.1.3
The existence state of this row. This object follows the ExistenceState behaviour.
                                     xIsisCircISOperState 1.3.6.1.4.1.33.26.2.2.1.4
The operational state of the row. This object follows the operationalState behaviour.
                                     xIsisCircISHoldTimerMult 1.3.6.1.4.1.33.26.2.2.1.5
The factor to derive holding timer from configuration timer. This value when multipled by a configuration timer yields the value of the holding timer parameter issued with configuration information. The semantics of this parameter are such that it is permissible to add a delta value to the result to compensate for possible delays and imprecision of timers. The result of the calculation is truncated, upon overflow, to the maximum value for the parameter permitted by the protocol (65535).
                                     xIsisCircISConfTimer 1.3.6.1.4.1.33.26.2.2.1.6
Value in seconds for the ISO 9542 IS configuration timer. It is used to determine how often an IS reports configuration information to ESs. This object follows the resettingTimer behaviour.
                                     xIsisCircISSuggESConfTimer 1.3.6.1.4.1.33.26.2.2.1.7
Value to be used for the ISO 9542 suggested ES configuration timer value (in seconds), advertised in IS Hellos generated by the system on this circuit. This object follows the resettingTimer behaviour.
                                     xIsisCircISRedHoldTime 1.3.6.1.4.1.33.26.2.2.1.8
The holding time (in seconds) to be specified in Redirect PDUs generated by the system on this circuit.
                                     xIsisCircISESReachChgs 1.3.6.1.4.1.33.26.2.2.1.9
Count of the number of changes in reachability of End Systems from this circuit.
                                     xIsisCircISInv9542PDUs 1.3.6.1.4.1.33.26.2.2.1.10
Counter of invalid 9542 PDUs received. This is the number of ISO 9452 PDUs received which are discarded as a result of the PDU Header Error Detection or Protocol Error Processing Functions specified in ISO 9542.
                             xIsisCircClnsTable 1.3.6.1.4.1.33.26.2.3
The set of objects controlling the operation of the CLNS protocol (ISO 8473) on each circuit over which ISIS is run.
                                 xIsisCircClnsEntry 1.3.6.1.4.1.33.26.2.3.1
Each entry contains objects controlling the operation of the CLNS protocol (ISO 8473) on one circuit.
                                     xIsisCircClnsSysInstance 1.3.6.1.4.1.33.26.2.3.1.1
The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.
                                     xIsisCircClnsIndex 1.3.6.1.4.1.33.26.2.3.1.2
The unique identifier of this row. This value is the same as the value of the ifIndex object which identifies the interface which corresponds to this circuit. This object follows the index behaviour.
                                     xIsisCircClnsExistState 1.3.6.1.4.1.33.26.2.3.1.3
The existence state of this row. This object follows the ExistenceState behaviour.
                                     xIsisCircClnsOperState 1.3.6.1.4.1.33.26.2.3.1.4
The operational state of the row. This object follows the operationalState behaviour.
                                     xIsisCircClnsRxPDUs 1.3.6.1.4.1.33.26.2.3.1.5
Counter of number of CLNS PDUs received on this circuit.
                                     xIsisCircClnsTxPDUs 1.3.6.1.4.1.33.26.2.3.1.6
Counter of number of CLNS PDUs transmitted on this circuit.
                         xIsisISAdj 1.3.6.1.4.1.33.26.3
                             xIsisISAdjTable 1.3.6.1.4.1.33.26.3.1
The table of adjacencies to Intermediate Systems.
                                 xIsisISAdjEntry 1.3.6.1.4.1.33.26.3.1.1
Each entry corresponds to one adjacency to an Intermediate System on this system.
                                     xIsisISAdjSysInstance 1.3.6.1.4.1.33.26.3.1.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
                                     xIsisISAdjCircIndex 1.3.6.1.4.1.33.26.3.1.1.2
The identifier of the Circuit which is the parent of the IS adjacency.
                                     xIsisISAdjIndex 1.3.6.1.4.1.33.26.3.1.1.3
A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is assigned by the system when the adjacency is created automatically.
                                     xIsisISAdjState 1.3.6.1.4.1.33.26.3.1.1.4
The state of the adjacency
                                     xIsisISAdjNeighSNPAAddress 1.3.6.1.4.1.33.26.3.1.1.5
The SNPA address of the neighboring system.
                                     xIsisISAdjNeighSysType 1.3.6.1.4.1.33.26.3.1.1.6
The type of the neighboring system.
                                     xIsisISAdjNeighSysID 1.3.6.1.4.1.33.26.3.1.1.7
The system ID of the neighboring Intermediate System set from the source ID field of the neighbors IIH PDUs.
                                     xIsisISAdjUsage 1.3.6.1.4.1.33.26.3.1.1.8
The usage of the adjacency. An adjacency of type level1 will be used for level 1 traffic only. An adjacency of type level2 will be used for level 2 traffic only. An adjacency of type level1and2 will be used for both level 1 and level 2 traffic. There may be two adjacencies (of types level1 and level2) between the same pair of Intermediate Systems.
                                     xIsisISAdjHoldTimer 1.3.6.1.4.1.33.26.3.1.1.9
The holding time for this adjacency updated from received IIH PDUs.
                                     xIsisISAdjNeighPriority 1.3.6.1.4.1.33.26.3.1.1.10
Priority of the neighboring Intermediate System for becoming the LAN Level 1 Designated Intermediate System if the value of xIsisISAdjNeighSysType is L1IntermediateSystem or LAN Level 2 Designated Intermediate System if the value of xIsisISAdjNeighSysType is L2IntermediateSystem.
                             xIsisISAdjAreaAddrTable 1.3.6.1.4.1.33.26.3.2
This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.
                                 xIsisISAdjAreaAddrEntry 1.3.6.1.4.1.33.26.3.2.1
Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs.
                                     xIsisISAdjAreaAddrSysInstance 1.3.6.1.4.1.33.26.3.2.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
                                     xIsisISAdjAreaAddrCircIndex 1.3.6.1.4.1.33.26.3.2.1.2
The identifier of the Circuit which is the parent of the IS adjacency to which this Area Address entry corresponds.
                                     xIsisISAdjAreaAddrAdjIndex 1.3.6.1.4.1.33.26.3.2.1.3
The identifier of the IS adjacency to which this entry belongs.
                                     xIsisISAdjAreaAddress 1.3.6.1.4.1.33.26.3.2.1.4
One Area Address as reported in IIH PDUs received from the neighbor.
                             xIsisISAdjIPAddrTable 1.3.6.1.4.1.33.26.3.3
This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.
                                 xIsisISAdjIPAddrEntry 1.3.6.1.4.1.33.26.3.3.1
Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs.
                                     xIsisISAdjIPAddrSysInstance 1.3.6.1.4.1.33.26.3.3.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
                                     xIsisISAdjIPAddrCircIndex 1.3.6.1.4.1.33.26.3.3.1.2
The identifier of the Circuit which is the parent of the IS adjacency to which this IP Address entry corresponds.
                                     xIsisISAdjIPAddrAdjIndex 1.3.6.1.4.1.33.26.3.3.1.3
The identifier of the IS adjacency to which this entry belongs.
                                     xIsisISAdjIPAddress 1.3.6.1.4.1.33.26.3.3.1.4
One IP Address as reported in IIH PDUs received from the neighbor.
                             xIsisISAdjProtSuppTable 1.3.6.1.4.1.33.26.3.4
This table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs.
                                 xIsisISAdjProtSuppEntry 1.3.6.1.4.1.33.26.3.4.1
Each entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs.
                                     xIsisISAdjProtSuppSysInstance 1.3.6.1.4.1.33.26.3.4.1.1
The unique identifier of the Integrated IS-IS instance to which this row corresponds.
                                     xIsisISAdjProtSuppCircIndex 1.3.6.1.4.1.33.26.3.4.1.2
The identifier of the Circuit which is the parent of the IS adjacency to which this supported protocol entry corresponds.
                                     xIsisISAdjProtSuppAdjIndex 1.3.6.1.4.1.33.26.3.4.1.3
The identifier the IS adjacency to which this entry corresponds.
                                     xIsisISAdjProtSuppProtocol 1.3.6.1.4.1.33.26.3.4.1.4
One supported protocol as reported in IIH PDUs received from the neighbor.
                         xIsisESAdj 1.3.6.1.4.1.33.26.4
                             xIsisESAdjTable 1.3.6.1.4.1.33.26.4.1
The table of End System IDs of neighboring End Systems as reported in their ESH PDUs or as configured manually
                                 xIsisESAdjEntry 1.3.6.1.4.1.33.26.4.1.1
Each entry contains one End System ID of a neighboring End System as reported in an ESH PDU or as configured manually.
                                     xIsisESAdjSysInstance 1.3.6.1.4.1.33.26.4.1.1.1
The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.
                                     xIsisESAdjCircIndex 1.3.6.1.4.1.33.26.4.1.1.2
The identifier of the Circuit which is the parent of the ES adjacency to which this End System ID entry corresponds. This object follows the index and manualOrAutomatic behaviours.
                                     xIsisESAdjIndex 1.3.6.1.4.1.33.26.4.1.1.3
The identifier of the ES adjacency to which this entry belongs. This object follows the index and manualOrAutomatic behaviours.
                                     xIsisESAdjType 1.3.6.1.4.1.33.26.4.1.1.4
The indication of whether this adjacency was created manually by management action or automatically by the implementation.
                                     xIsisESAdjState 1.3.6.1.4.1.33.26.4.1.1.5
The state of the adjacency. Adjacencies created manually always have this value set to up.
                                     xIsisESAdjNeighSNPAAddress 1.3.6.1.4.1.33.26.4.1.1.6
The SNPA address of the neighboring system. This object follows the manualOrAutomatic behaviour.
                                     xIsisESAdjExistState 1.3.6.1.4.1.33.26.4.1.1.7
The existence state of this ES Adjacency. This object follows the ExistenceState behaviour. This object follows the manualOrAutomatic behaviour.
                                     xIsisESAdjESID 1.3.6.1.4.1.33.26.4.1.1.8
An End System ID of a neighboring End System. This object follows the index and manualOrAutomatic behaviour.
                         xIsisReachAddr 1.3.6.1.4.1.33.26.5
                             xIsisRATable 1.3.6.1.4.1.33.26.5.1
The table of Reachable Addresses to NSAPs or Address Prefixes.
                                 xIsisRAEntry 1.3.6.1.4.1.33.26.5.1.1
Each entry defines a Reachable Address to a NSAP or Address Prefix.
                                     xIsisRASysInstance 1.3.6.1.4.1.33.26.5.1.1.1
The identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index and manualOrAutomatic behaviours.
                                     xIsisRACircIndex 1.3.6.1.4.1.33.26.5.1.1.2
The identifier of the Circuit over which this destination is reachable. This object follows the index and manualOrAutomatic behaviours.
                                     xIsisRAIndex 1.3.6.1.4.1.33.26.5.1.1.3
The identifier for this xIsisRAEntry. This value must be unique amongst all Reachable Addresses on the same parent Circuit. This object follows the index and manualOrAutomatic behaviours.
                                     xIsisRAExistState 1.3.6.1.4.1.33.26.5.1.1.4
The existence state of this Reachable Address. This object follows the ExistenceState and manualOrAutomatic behaviours.
                                     xIsisRAOperState 1.3.6.1.4.1.33.26.5.1.1.5
The operational state of the Reachable Address. This object follows the operationalState and manualOrAutomatic behaviours.
                                     xIsisRAAddrPrefix 1.3.6.1.4.1.33.26.5.1.1.6
The destination of this Reachable Address. This is an Address Prefix. This object follows the replaceOnlyWhileDisabled and manualOrAutomatic behaviours.
                                     xIsisRAMapType 1.3.6.1.4.1.33.26.5.1.1.7
The type of mapping to be employed to ascertain the SNPA Address which should be used in forwarding PDUs for this Reachable Address prefix. This object follows the manualOrAutomatic behaviour. The following values of mapping type are defined: none: The mapping is null because the neighbor SNPA is implicit by nature of the subnetwork (e.g. a point-to-point linkage). explicit: The subnetwork addresses in the object xIsisRASNPAAddress is to be used. extractIDI: The SNPA is embedded in the IDI of the destination NSAP Address. The mapping algorithm extracts the SNPA to be used according to the format and encoding rules of ISO8473/Add2. This SNPA extraction algorithm can be used in conjunction with Reachable Address prefixes from the X.121, F.69, E.163 and E.164 addressing subdomains. extractDSP: All, or a suffix, of the SNPA is embedded in the DSP of the destination address. This SNPA extraction algorithm extracts the embedded subnetwork addressing information by performing a logical AND of the xIsisRASNPAMask object value with the destination address. The part of the SNPA extracted from the destination NSAP is appended to the xIsisRASNPAPrefix object value to form the next hop subnetwork addressing information.
                                     xIsisRADefMetric 1.3.6.1.4.1.33.26.5.1.1.8
The default metric value for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour.
                                     xIsisRADelMetric 1.3.6.1.4.1.33.26.5.1.1.9
The delay metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indicate that this metric is not supported.
                                     xIsisRAExpMetric 1.3.6.1.4.1.33.26.5.1.1.10
The expense metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indicate that this metric is not supported.
                                     xIsisRAErrMetric 1.3.6.1.4.1.33.26.5.1.1.11
The error metric for reaching the specified prefix over this circuit. This object follows the manualOrAutomatic behaviour. The value zero is reserved to indicate that this metric is not supported.
                                     xIsisRADefMetricType 1.3.6.1.4.1.33.26.5.1.1.12
Indicates whether the default metric is internal or external. This object follows the manualOrAutomatic behaviour.
                                     xIsisRADelMetricType 1.3.6.1.4.1.33.26.5.1.1.13
Indicates whether the delay metric is internal or external. This object follows the manualOrAutomatic behaviour.
                                     xIsisRAExpMetricType 1.3.6.1.4.1.33.26.5.1.1.14
Indicates whether the expense metric is internal or external. This object follows the manualOrAutomatic behaviour.
                                     xIsisRAErrMetricType 1.3.6.1.4.1.33.26.5.1.1.15
Indicates whether the error metric is internal or external. This object follows the manualOrAutomatic behaviour.
                                     xIsisRASNPAAddress 1.3.6.1.4.1.33.26.5.1.1.16
The SNPA Address to which a PDU may be forwarded in order to reach a destination which matches the address prefix of the Reachable Address. This object follows the manualOrAutomatic behaviour.
                                     xIsisRASNPAMask 1.3.6.1.4.1.33.26.5.1.1.17
A bit mask with 1 bits indicating the positions in the effective destination address from which embedded SNPA information is to be extracted. For the extraction the first octet of the xIsisRASNPAMask object value is aligned with the first octet (AFI) of the NSAP Address. If the xIsisRASNPAMask object value and NSAP Address are of different lengths, the shorter of the two is logically padded with zeros before performing the extraction. This object follows the manualOrAutomatic behaviour.
                                     xIsisRASNPAPrefix 1.3.6.1.4.1.33.26.5.1.1.18
A fixed SNPA prefix for use when the xIsisRAMapType is extractDSP. The SNPA Address to use is formed by concatenating the fixed SNPA prefix with a variable SNPA part that is extracted from the effective destination address. For Reachable Address prefixes in which the entire SNPA is embedded in the DSP the SNPA Prefix shall be null. This object follows the manualOrAutomatic behaviour.
                                     xIsisRAType 1.3.6.1.4.1.33.26.5.1.1.20
The type of Reachable address. Those of type manual are created by the network manager. Those of type automatic are created through propogation of routing information from another routing protocol (eg. IDRP).
                         xIsisCLNPDest 1.3.6.1.4.1.33.26.7
                             xIsisL1CLNPDestTable 1.3.6.1.4.1.33.26.7.1
The Level 1 CLNP Destination Table records information about each end system ID destination known to the Intermediate System.
                                 xIsisL1CLNPDestEntry 1.3.6.1.4.1.33.26.7.1.1
Each entry records information about one CLNP end system ID destination known to the Intermediate System.
                                     xIsisL1CLNPSysInstance 1.3.6.1.4.1.33.26.7.1.1.1
If the value of xIsisL1CLNPRouteSource is manual or level1 then this is the identifier of the Integrated IS-IS Level 1 instance from which this reachability information was learned, otherwise this value is zero.
                                     xIsisL1CLNPRouteDest 1.3.6.1.4.1.33.26.7.1.1.2
The destination end system ID.
                                     xIsisL1CLNPRouteMetricQOS 1.3.6.1.4.1.33.26.7.1.1.3
The QOS metric for this destination.
                                     xIsisL1CLNPRouteMetricType 1.3.6.1.4.1.33.26.7.1.1.4
Indicates whether the metric has an external component or not
                                     xIsisL1CLNPRouteMetricValue 1.3.6.1.4.1.33.26.7.1.1.5
The path metric value for this destination.
                                     xIsisL1CLNPRouteForw 1.3.6.1.4.1.33.26.7.1.1.6
The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an OBJECT IDENTIFIER for an instance of the object: xIsisESAdjSysInstance or xIsisISAdjSysInstance.
                                     xIsisL1CLNPRouteSource 1.3.6.1.4.1.33.26.7.1.1.7
The source of the destination. Manual is used if the source is manually configured information on the system. Level1 is used if the source is Level 1 LSPs. Esis is used if the source is ES Hellos
                             xIsisL2CLNPDestTable 1.3.6.1.4.1.33.26.7.2
The Level 2 CLNP Destination Table records information about each NSAP Address Prefix known to the Intermediate System.
                                 xIsisL2CLNPDestEntry 1.3.6.1.4.1.33.26.7.2.1
Each entry records information about one NSAP Address Prefix known to the Intermediate System.
                                     xIsisL2CLNPSysInstance 1.3.6.1.4.1.33.26.7.2.1.1
The identifier of the Integrated IS-IS Level 2 instance from which this reachability information was learned.
                                     xIsisL2CLNPRouteDest 1.3.6.1.4.1.33.26.7.2.1.2
The destination address prefix.
                                     xIsisL2CLNPRouteMetricQOS 1.3.6.1.4.1.33.26.7.2.1.3
The QOS metric for this destination.
                                     xIsisL2CLNPRouteMetricType 1.3.6.1.4.1.33.26.7.2.1.4
Indicates whether the metric has an external component or not
                                     xIsisL2CLNPRouteMetricValue 1.3.6.1.4.1.33.26.7.2.1.5
The path metric value for this destination.
                                     xIsisL2CLNPRouteForw 1.3.6.1.4.1.33.26.7.2.1.6
The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an OBJECT IDENTIFIER for an instance of one of the following objects: isisVirtSysInstance, xIsisISAdjSysInstance, xIsisRASysInstance.
                                     xIsisL2CLNPRouteSource 1.3.6.1.4.1.33.26.7.2.1.7
The source of the destination. Manual is used if the source is manually configured information on the system. Level2 is used if the source is Level 2 LSPs.
                             xIsisL3CLNPDestTable 1.3.6.1.4.1.33.26.7.3
The Level 3 CLNP Destination Table records information about each Reachable Address Prefix known to the Intermediate System.
                                 xIsisL3CLNPDestEntry 1.3.6.1.4.1.33.26.7.3.1
Each entry records information about one Address Prefix known to the Intermediate System.
                                     xIsisL3CLNPSysInstance 1.3.6.1.4.1.33.26.7.3.1.1
The identifier of the Integrated IS-IS Level 3 instance from which this reachability information was learned.
                                     xIsisL3CLNPRouteDest 1.3.6.1.4.1.33.26.7.3.1.2
The destination address prefix.
                                     xIsisL3CLNPRouteMetricQOS 1.3.6.1.4.1.33.26.7.3.1.3
The QOS metric for this destination.
                                     xIsisL3CLNPRouteMetricType 1.3.6.1.4.1.33.26.7.3.1.4
Indicates whether the metric has an external component or not
                                     xIsisL3CLNPRouteMetricValue 1.3.6.1.4.1.33.26.7.3.1.5
The path metric value for this destination.
                                     xIsisL3CLNPRouteForw 1.3.6.1.4.1.33.26.7.3.1.6
The OBJECT IDENTIFIER for the first object in the table entry which corresponds to the entry used for forwarding packets to this destination. This value is an OBJECT IDENTIFIER for an instance of one of the following objects: isisVirtSysInstance, xIsisISAdjSysInstance, xIsisRASysInstance.
                                     xIsisL3CLNPRouteSource 1.3.6.1.4.1.33.26.7.3.1.7
The source of the destination. Manual is used if the source is manually configured information on the system. Level3 is used if the source is Level 3 LSPs.
                   xRmon 1.3.6.1.4.1.33.31
                         xRmonMonitor 1.3.6.1.4.1.33.31.1
                             xRmonMonitorRemote 1.3.6.1.4.1.33.31.1.1
Once an alarm is completed, monitoring for that variable may be distributed within an enclosure to another processor. Factors affecting this decision include variable type, slot number, and processor type. Furthermore, alarms which have identical parameters (variable, interval, thresholds, etc.) are viewed by the monitoring processor as a single object to monitor. Alarm variables falling into this category are a subset of the repeater MIB and iTouch repeater MIB objects. This field represents the number of objects this system CPU is monitoring on behalf of alarms which were distributed to it by a management processor.
                             xRmonMonitorLocal 1.3.6.1.4.1.33.31.1.2
Once an alarm is completed, monitoring for that variable may be distributed within an enclosure to another processor. Factors affecting this decision include variable type, slot number, and processor type. Furthermore, alarms which have identical parameters (variable, interval, thresholds, etc.) are viewed by the monitoring processor as a single object to monitor. Alarm variables falling into this category are a subset of the repeater MIB and iTouch repeater MIB objects. This field represents the number of objects this system CPU is monitoring, objects it did not distribute to another processor.
                             xRmonLogClear 1.3.6.1.4.1.33.31.1.3
Set this field to execute to delete all RMON log table entries. Setting to ready has no effect.
                             xRmonLogTotal 1.3.6.1.4.1.33.31.1.4
This field reports the total number of RMON log entries created since the system was initialized. Clearing the log table does not change this value.
                             xRmonLogLastDateTime 1.3.6.1.4.1.33.31.1.5
The local date and time of the system at the time an RMON log entry was last created.
                             xRmonTrapType 1.3.6.1.4.1.33.31.1.6
Use this field to specify the type of SNMP trap to generate when an alarm event occurs. The value standardFormat formats the trap as a standard, RMON-compliant rising and falling event trap. The value iTouchFormat formats the trap as a DisplayString containing a human-readable summary of the event. The text of the string is very similar to that of the log descriptions.
                             xRmonRepeaterManagement 1.3.6.1.4.1.33.31.1.7
This field enables and disables RMON monitoring of certain repeater related variables in the chassis. Set this field to enabled to allow this slot to activate alarms and report traps for variables from the standard repeater MIB (snmpDot3RptrMgt 1.3.6.1.2.1.22) and the iTouch repeater MIB (xRepeater 1.3.6.1.4.1.33.17). When you set this field to disabled, alarms may still be created for these repeater variables, but no monitoring will take place for them. The alarm state will be held during this time. Only one slot in a chassis may have this field set to enabled at any given time. Setting enabled in any one slot automatically sets it to disabled in every other slot. Repeater variable monitoring in those slots will cease and the corresponding alarm states will be held.
                             xRmonAlarmActivate 1.3.6.1.4.1.33.31.1.8
Use this field to change the states of all completed alarms to active or inactive. Select activateAll to make all completed alarms not in the active state become active again. This is useful for alarms whose error states are not automatically cleared by the system. Alarms whose error conditions have not cleared will remain in their current states. Select deactivateAll to make all completed alarms that are in the active state become inactive. This is a convenient way to suppress alarm activity while making other configuration changes without actually deleting the alarms. Alarms which are incomplete (e.g., creating state) are not affected by these actions. If you want to alter the state of a single alarm, modify the table entry for that alarm. Selecting noAction has no effect.
                             xRmonAlarmClear 1.3.6.1.4.1.33.31.1.9
Set this field to deleteAll to delete all alarm table entries and their associated event entries. Setting to noAction has no effect.
                             xRmonAlarmCount 1.3.6.1.4.1.33.31.1.10
                                   xRmonAlarmsIncomplete 1.3.6.1.4.1.33.31.1.10.1
This value represents the number of alarms that are not completed. Completing these alarms will make them active.
                                   xRmonAlarmsActive 1.3.6.1.4.1.33.31.1.10.2
This value represents the number of alarms whose state is active. These are completed alarms which are actively monitored.
                                   xRmonAlarmsHeld 1.3.6.1.4.1.33.31.1.10.3
This value represents the number of alarms whose state is held. These are completed alarms which will not be actively monitored because the Repeater Management feature for this processor is currently disabled. Enabling the feature will activate all alarms in this state.
                                   xRmonAlarmsOther 1.3.6.1.4.1.33.31.1.10.4
This value represents the number of completed alarms that are not active and not held. Monitoring is not active for these alarms.
                             xRmonAlarmInitAction 1.3.6.1.4.1.33.31.1.11
Use this field to specify whether all alarms read from the parameter file should be placed in the active state or the inactive state upon system initialization. Selecting activateUponInit (the default) will activate all alarms read from the parameter file when the system initializes. Selecting inactiveUponInit will place all alarms in the inactive state when the system initializes. Modifying this value does not affect the present state of any alarm.
                         xRmonMB 1.3.6.1.4.1.33.31.2
                             xRmonMBConfig 1.3.6.1.4.1.33.31.2.1
                                 mbAlarmIndex 1.3.6.1.4.1.33.31.2.1.1
This field can be either the index of an existing alarm (as seen in the alarm summary view) or a new number to create a new alarm. Specify the index of an existing alarm to fill the remaining fields with the corresponding settings from that alarm. To modify the settings of a completed alarm, set its status to underCreation. Specify an index which does not exist to create a new alarm. The initial settings of the remaining fields are taken from the alarm you were previously viewing, if any. This makes it easier to copy an alarm definition when you want to change only a few of the settings, such as the alarm variable or keys. Specify a value of 0 to clear the remaining fields.
                                 mbAlarmInterval 1.3.6.1.4.1.33.31.2.1.2
The interval in seconds over which the variable is sampled and compared with the rising and falling thresholds. If the monitored variable exceeds the limit 2^31-1 (4294967295), the alarm value field may roll over to 0 and cause or suppress the generation of an alarm event during that interval. You may not modify this field once the alarm is completed (see alarm status field).
                                 mbAlarmVariable 1.3.6.1.4.1.33.31.2.1.3
This value shows the SNMP object identifier of the variable being sampled. Only variables that have an SNMP SYNTAX of INTEGER, Counter, Gauge, or TimeTicks may be sampled. When you specify an object identifier in this field, the quick list, key prompt, and key value fields are filled for you with the appropriate values. If you specify an object not found in the quick list, that field is set to unlistedAlarmVariable. The key values will be set to zero in this case. If you specify an alarm variable and keys using the quick list and key fields, an SNMP object identifier is built for you and placed in this field. You may not modify this field at the same time that you modify the quick list field or either of the key values. You may not modify this field once the alarm is completed (see alarm status field).
                                 mbAlarmInterpretation 1.3.6.1.4.1.33.31.2.1.4
Use this field when you want to select an alarm variable without specifying its entire SNMP object identifier. First, modify this field by selecting a variable from the list. Then, read the key prompt fields. They will direct you to specify key values appropriate to the selected variable. The SNMP object identifier will be built for you when you are done. You may not modify this field at the same time that you modify the object identifier field. You may not modify this field once the alarm is completed (see alarm status field).
                                 mbAlarmKey1Meaning 1.3.6.1.4.1.33.31.2.1.5
This field describes how its adjacent key value field will be interpreted when building a complete SNMP object identifier for the alarm variable. The value of this field changes as you select different items from the quick list or specify different SNMP object identifiers. This object has the value not applicable if its key value is not necessary or the object is unknown.
                                 mbAlarmKey1 1.3.6.1.4.1.33.31.2.1.6
Specify a value here according the the instructions given in its adjacent prompt field. That prompt explains how this field will be used. You may still modify this field even though the prompt field indicates that it is not applicable to the selected variable. It will be ignored. You may not modify this field at the same time that you modify the object identifier field. You may not modify this field once the alarm is completed (see alarm status field).
                                 mbAlarmKey2Meaning 1.3.6.1.4.1.33.31.2.1.7
This field describes how its adjacent key value field will be interpreted when building a complete SNMP object identifier for the alarm variable. The value of this field changes as you select different items from the quick list or specify different SNMP object identifiers. This object has the value not applicable if its key value is not necessary or the object is unknown.
                                 mbAlarmKey2 1.3.6.1.4.1.33.31.2.1.8
Specify a value here according the the instructions given in its adjacent prompt field. That prompt explains how this field will be used. In some cases, the value zero has a special meaning. This often occurs when you are prompted to enter a port number. Zero indicates you want each port in the indicated slot to be monitored by this alarm. Only one alarm will exist, but it will generate an event each time any of the ports meets its criteria. You may still modify this field even though the prompt field indicates that it is not applicable to the selected variable. It will be ignored. You may not modify this field at the same time that you modify the object identifier field. You may not modify this field once the alarm is completed (see alarm status field).
                                 mbAlarmSampleType 1.3.6.1.4.1.33.31.2.1.9
Use this field to select the method of calculating the value to be compared against the thresholds. When you set this to absoluteValue, the variable you specified is compared directly with the alarm thresholds at the end of each monitoring interval. When you set this to changeInValue, the change in the value of the variable over the interval is compared with the thresholds. This is useful for detecting changes in rates of activity. You may not modify this field once the alarm is completed (see alarm status field).
                                 mbAlarmValue 1.3.6.1.4.1.33.31.2.1.10
This field shows the value of the alarm variable at the end of the most recent monitoring interval. If the alarm sample type is changeInValue, it instead shows the change in value over that interval. This field is zero any time the alarm is not active, or when the alarm is a wildcard (that is, a port or repeater number of 0 was specified for key 2 value). The value of this field has meaning after the alarm configuration is complete and monitoring begins.
                                 mbAlarmRisingThreshold 1.3.6.1.4.1.33.31.2.1.11
This is the rising threshold value for the alarm. When the current alarm value, specified by the alarm sample type, is greater than or equal to this threshold, and the value at the previous sampling interval was less than this threshold, a single rising alarm event will be generated. Another rising alarm event will not be generated until the sampled value falls below the falling threshold value. You may not modify this field once the alarm is completed (see alarm status field).
                                 mbAlarmFallingThreshold 1.3.6.1.4.1.33.31.2.1.12
This is the falling threshold value for the alarm. When the current alarm value, specified by the alarm sample type, is less than or equal to this threshold, and the value at the previous sampling interval was greater than this threshold, a single rising alarm event will be generated. Another rising alarm event will not be generated until the sampled value falls below the falling threshold value. You may not modify this field once the alarm is completed (see alarm status field).
                                 mbAlarmRisingEventType 1.3.6.1.4.1.33.31.2.1.13
Use this field to indicate the type of notification to make when the alarm variable exceeds its rising threshold. The default action is to generate both a log entry and a trap. Set this field to noAction to suppress notification of rising threshold events. Set this field to logOnly to generate an RMON alarm log entry. These log entries may be viewed through the RMON alarm log view. Set this field to trapOnly to generate an SNMP trap. Refer to the RMON alarm summary to specify whether traps are generated in standard RMON format or in iTouch format. Choosing logAndTrap invokes both these actions. You may not modify this field once the alarm is completed (see alarm status field).
                                 mbAlarmFallingEventType 1.3.6.1.4.1.33.31.2.1.14
Use this field to indicate the type of notification to make when the alarm variable exceeds its falling threshold. The default action is to generate both a log entry and a trap. Set this field to noAction to suppress notification of falling threshold events. Set this field to logOnly to generate an RMON alarm log entry. These log entries may be viewed through the RMON alarm log view. Set this field to trapOnly to generate an SNMP trap. Refer to the RMON alarm summary to specify whether traps are generated in standard RMON format or in iTouch format. Choosing logAndTrap invokes both these actions. You may not modify this field once the alarm is completed (see alarm status field).
                                 mbAlarmSummary 1.3.6.1.4.1.33.31.2.1.15
As you make changes to the to alarm settings, this field is filled with an easily readable summary of the alarm parameters. This is to make it easy for you to confirm that monitoring will behave as you expected once the alarm status is active.
                                 mbAlarmStatus 1.3.6.1.4.1.33.31.2.1.16
Describes the current operational state of the alarm and allows you to make limited changes in the state of the alarm for purposes of managing its state. You may set this field to one of: underCreation, active, inactive, and delete. All other values report current status. underCreation: Alarm configuration is incomplete. You may modify alarm parameters. No monitoring is taking place for the alarm. An alarm is saved in a parameter file after configuration complete. Select this state before changing a previously completed alarm. active: Alarm configuration is complete and active monitoring of the alarm variable is in progress. Select this state to complete an alarm or to begin active monitioring of the alarm variable. inactive: No monitoring of the alarm variable is actively taking place. Select this state when you want to temporarily suppress monitoring for the alarm. Select active to begin monitoring again. delete: Select this state when you want to delete this alarm and all log entries associated with it. held: Active monitoring of the alarm variable is not taking place because this system does not have RMON Repeater Management set to enabled. Once you do this, alarm monitoring begins automatically. noHubCard: The target slot does not contain a management card or repeater I/O card capable of monitoring. Monitoring will begin automatically once the target slot is loaded with a supported configuration. oldFirmware: The I/O card in the target slot does not contain monitoring firmware. Monitoring will begin automatically once that card has been loaded with current scm firmware. slotTimeout: The target slot did not respond to attempts to activate the alarm. May happen if the management card in the target slot does not contain monitoring software. Monitoring begins automatically once the target slot has been repaired or loaded with current software. slotFailed: Active monitoring of the alarm variable stopped because the target slot was not operating properly. Monitoring automatically resumes once the target slot has recovered. monitorStopped: Active monitoring of the alarm variable stopped due to some error. This can occur if the variable no longer exists because a related configuration change has made it invalid. Correct the condition and re-activate the alarm. unknownVariable: The alarm variable specified by the object ID is not recognized in the currently running system. Correct the entry. keysMissing: One or more required key values are not specified in the alarm variable object ID. Correct the entry. noResources: Not enough system resources exist to activate this alarm. Reduce the use of packet buffers or available memory and re-activate the alarm. loading: The alarm is being read from a parameter file and will soon be activated. This condition is transient. activating: Monitoring of the alarm variable will begin soon. This condition is transient. deactivating: Monitoring of the alarm variable will stop soon. This condition is transient. unsupported: Monitoring for the alarm variable is not supported by the target slot. Monitoring will begin once that card is loaded with current scm firmware or software. unknownAlarm: Monitoring stopped because the target slot reset. Monitoring will continue shortly. inconsistency: Internal system error. invalidFlags: Internal system error. invalidSlot: Alarm specified for a slot which does not exist in the chassis. Modify and re-activate. inaccessible: Monitoring of the alarm variable could not begin. This can occur if the key values are invalid for the variable. Correct and re-activate the alarm. otherError: An unspecified error has occurred.
                             mbAlarmTable 1.3.6.1.4.1.33.31.2.2
A list of RMON alarms. This table is indexed by alarmIndex to provide an intuitive mapping between alarms and descriptions.
                                 mbAlarmEntry 1.3.6.1.4.1.33.31.2.2.1
A description of an RMON alarm which summarizes the actual RMON alarm and event parameters corresponding to this entry.
                                     mbAlarmCondition 1.3.6.1.4.1.33.31.2.2.1.1
Describes the current operational state of the alarm and allows you to make limited changes in the state of the alarm for purposes of managing its state. You may set this field to one of: underCreation, active, inactive, and delete. All other values report current status. underCreation: Alarm configuration is incomplete. You may modify alarm parameters. No monitoring is taking place for the alarm. An alarm is saved in a parameter file after configuration complete. Select this state before changing a previously completed alarm. active: Alarm configuration is complete and active monitoring of the alarm variable is in progress. Select this state to complete an alarm or to begin active monitioring of the alarm variable. inactive: No monitoring of the alarm variable is actively taking place. Select this state when you want to temporarily suppress monitoring for the alarm. Select active to begin monitoring again. delete: Select this state when you want to delete this alarm and all log entries associated with it. held: Active monitoring of the alarm variable is not taking place because this system does not have RMON Repeater Management set to enabled. Once you do this, alarm monitoring begins automatically. noHubCard: The target slot does not contain a management card or repeater I/O card capable of monitoring. Monitoring will begin automatically once the target slot is loaded with a supported configuration. oldFirmware: The I/O card in the target slot does not contain monitoring firmware. Monitoring will begin automatically once that card has been loaded with current scm firmware. slotTimeout: The target slot did not respond to attempts to activate the alarm. May happen if the management card in the target slot does not contain monitoring software. Monitoring begins automatically once the target slot has been repaired or loaded with current software. slotFailed: Active monitoring of the alarm variable stopped because the target slot was not operating properly. Monitoring automatically resumes once the target slot has recovered. monitorStopped: Active monitoring of the alarm variable stopped due to some error. This can occur if the variable no longer exists because a related configuration change has made it invalid. Correct the condition and re-activate the alarm. unknownVariable: The alarm variable specified by the object ID is not recognized in the currently running system. Correct the entry. keysMissing: One or more required key values are not specified in the alarm variable object ID. Correct the entry. noResources: Not enough system resources exist to activate this alarm. Allocate more packet buffers or increase free memory and re-activate the alarm. loading: The alarm is being read from a parameter file and will soon be activated. This condition is transient. activating: Monitoring of the alarm variable will begin soon. This condition is transient. deactivating: Monitoring of the alarm variable will stop soon. This condition is transient. unsupported: Monitoring for the alarm variable is not supported by the target slot. Monitoring will begin once that card is loaded with current scm firmware or software. unknownAlarm: Monitoring stopped because the target slot reset. Monitoring will continue shortly. inconsistency: Internal system error. invalidFlags: Internal system error. invalidSlot: Alarm specified for a slot which does not exist in the chassis. Modify and re-activate. inaccessible: Monitoring of the alarm variable could not begin. This can occur if the key values are invalid for the variable. Correct and re-activate the alarm. otherError: An unspecified error has occurred.
                                     mbAlarmDescription 1.3.6.1.4.1.33.31.2.2.1.2
= or <= . is from: Do nothing, Create log record, Generate trap, Create log and trap, or Various actions, based on the alarm rising and falling event types. is one of value of or change in, according to the alarm sample type. , if recognized, describes the quick list selection. If unlisted, the object identifier is substituted. and appear only if is recognized and represent phrases like slot, port, and any port. and represent the rising and falling threshold values, respectively. The phrase describes the units per N seconds or the length of the sample interval in seconds.
                             mbLogTable 1.3.6.1.4.1.33.31.2.3
A list of RMON logTable entries.
                                 mbLogEntry 1.3.6.1.4.1.33.31.2.3.1
A human-readable description of an RMON event.
                                     mbLogIndex 1.3.6.1.4.1.33.31.2.3.1.1
An index uniquely identifying an entry in this log table. Each such entry describes, in human-readable format, an RMON event occurring for an alarm. All RMON log table entries are shown, ordered most recent first.
                                     mbLogDescription 1.3.6.1.4.1.33.31.2.3.1.2
= or <= where and represent the rising and falling threshold values, respectively. The phrase describes the units per N seconds or the length of the sample interval in seconds.
                             mbResourceTable 1.3.6.1.4.1.33.31.2.4
A list of RMON resource entries.
                                 mbResourceEntry 1.3.6.1.4.1.33.31.2.4.1
Values to control and monitor RMON resources.
                                     mbResourceType 1.3.6.1.4.1.33.31.2.4.1.1
Identification of an RMON resource type. Typically each type corresponds to an RMON table whose size is to be controlled and monitored.
                                     mbResourceCurrent 1.3.6.1.4.1.33.31.2.4.1.2
The number of entries currently allocated by RMON.
                                     mbResourceWorst 1.3.6.1.4.1.33.31.2.4.1.3
The highest number of entries ever allocated by RMON since system initialization.
                                     mbResourceMaximum 1.3.6.1.4.1.33.31.2.4.1.4
The desired maximum possible number of resources of this type RMON is permitted to use at any one time. Changes to alarm, event, and log entry resource settings take effect immediately. Changes to the statistics resource takes place after the system is initialized. For alarms and events, this value may not be set less than the current number of entries in use.
                                     mbResourceOperMaximum 1.3.6.1.4.1.33.31.2.4.1.5
The actual maximum number of resources of this type RMON will attempt to use at any one time. This is the limit in effect for the current system.
                         xRmonMapTable 1.3.6.1.4.1.33.31.3
A list of RMON map entries.
                             xRmonMapEntry 1.3.6.1.4.1.33.31.3.1
Values to create RMON statistics tables for repeater ports.
                                 xRmonMapSlot 1.3.6.1.4.1.33.31.3.1.1
The slot the statistics will come from.
                                 xRmonMapPort 1.3.6.1.4.1.33.31.3.1.2
The port the statistics will come from.
                                 xRmonMapIfIndex 1.3.6.1.4.1.33.31.3.1.3
The interface index (ifIndex) corresponding to this statistics table.
 sysObjectID 5.1.1.2
The vendors authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box is being managed. For example, if vendor `Flintstones, Inc. was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router.
                   rptrGroupObjectID 5.1.22.1.2.1.1.3
The vendors authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of group is being managed. For example, this object could take the value 1.3.6.1.4.1.4242.1.2.14 if vendor Flintstones, Inc. was assigned the subtree 1.3.6.1.4.1.4242, and had assigned the identifier 1.3.6.1.4.1.4242.1.2.14 to its Wilma Flintstone 6-Port FOIRL Plug-in Module.