ITOUCH-X25-MIB: View SNMP OID List / Download MIB

VENDOR: MRV COMMUNICATIONS


 Home MIB: ITOUCH-X25-MIB
Download as:   
SNMPv2-CONF, ITOUCH-MIB, SNMPv2-SMI, RFC1382-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 xX25 1.3.6.1.4.1.33.20
       xX25ChannelTable 1.3.6.1.4.1.33.20.4 no-access
Entries of xX25Channel Table.
           xX25ChannelEntry 1.3.6.1.4.1.33.20.4.1 no-access
Entries of xX25ChannelTable.
               xX25ChannelIndex 1.3.6.1.4.1.33.20.4.1.1 integer read-only
The ifIndex value for the X.25 physical link.
               xX25ChannelLowPVC 1.3.6.1.4.1.33.20.4.1.2 integer read-write
Lowest PVC channel. Setting it to zero indicates 'none', and will also set the xX25ChannelHighPVC to zero. If set to a non-zero value and xX25ChannelHighPVC is zero, xX25ChannelHighPVC will be set to the same value. Otherwise, xX25ChannelLowPVC must be less than or equal to xX25ChannelHighPVC.
               xX25ChannelHighPVC 1.3.6.1.4.1.33.20.4.1.3 integer read-write
Highest PVC channel. Setting it to 0 indicates none, and will also set the xX25ChannelLowPVC to 0. If set to a non-zero value and xX25ChannelLowPVC is zero, xX25ChannelLowPVC will be set to the same value. Otherwise, xX25ChannelHighPVC must be less than or equal to xX25ChannelLowPVC.
               xX25ChannelNetwork 1.3.6.1.4.1.33.20.4.1.4 integer read-write
The type of network being run. Enumeration: 'ccitt': 1, 'ddnStandard': 2.
               xX25ChannelMaxPrecedence 1.3.6.1.4.1.33.20.4.1.5 integer read-write
The maximum level of IP precedence supported.
               xX25ChannelStdVersion 1.3.6.1.4.1.33.20.4.1.6 integer read-write
The standard year supported by x25. Values are usually 1980 or 1984 (the default).
       xX25VcCfgTable 1.3.6.1.4.1.33.20.6 no-access
These objects contain information about the virtual circuit configuration in an X.25 PLE. These values are the configured values for circuits that may or may not be connected. Unconfigured calls may be added to this table as calls are accepted.
           xX25VcCfgEntry 1.3.6.1.4.1.33.20.6.1 no-access
Entries of the xX25VcCfgTable.
               xX25VcCfgIndex 1.3.6.1.4.1.33.20.6.1.1 integer read-only
An arbitrary index value for the virtual circuit.
               xX25VcCfgPartnerAddr 1.3.6.1.4.1.33.20.6.1.2 x121address read-write
Partner's X.121 Address.
               xX25VcCfgInterfaceIndex 1.3.6.1.4.1.33.20.6.1.3 integer read-write
ifIndex of ITouch logical interface associated with this VC.
               xX25VcCfgLinkIndex 1.3.6.1.4.1.33.20.6.1.4 integer read-write
ifIndex of physical link on which this VC resides.
               xX25VcCfgProtocol 1.3.6.1.4.1.33.20.6.1.5 integer read-write
Protocol which is being encapsulated by this VC. Enumeration: 'ip': 4, 'multiProtocol': 6, 'osi': 7, 'appleTalk': 1, 'bridged': 2, 'decnet': 3, 'ipx': 5.
               xX25VcCfgEncapsulation 1.3.6.1.4.1.33.20.6.1.6 integer read-write
Encapsulation method used by this VC. Enumeration: 'snap': 3, 'dedicated': 2, 'null': 1.
               xX25VcCfgPvc 1.3.6.1.4.1.33.20.6.1.7 integer read-write
Channel number if VC is a PVC, else 0. The value must be in the range of xX25ChannelLowPVC to xX25ChannelHighPVC
               xX25VcCfgPartnerIpAddress 1.3.6.1.4.1.33.20.6.1.8 ipaddress read-write
IP address of the partner over this VC. This must be configured if IP packets will not be MAC-encapsulated.
               xX25VcCfgClearFacilities 1.3.6.1.4.1.33.20.6.1.9 integer read-write
Control to clear the VC call facilities string. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the string to be cleared. Enumeration: 'ready': 1, 'execute': 2.
               xX25VcCfgStatus 1.3.6.1.4.1.33.20.6.1.10 integer read-write
Setting to 'invalid' removes this VC from the table. If 'valid', setting to 'valid' has no effect, otherwise it creates an entry. Enumeration: 'valid': 2, 'invalid': 1.
       xX25LinkTable 1.3.6.1.4.1.33.20.7 no-access
These objects contain information about the configuration of the X.25 physical links necessary for the ITouch Bridge/Router. Unless otherwise noted, changes to these objects require that the X.25 physical link be restarted in order for the changes to take effect.
           xX25LinkEntry 1.3.6.1.4.1.33.20.7.1 no-access
Entries of the xX25LinkTable.
               xX25LinkIndex 1.3.6.1.4.1.33.20.7.1.1 integer read-only
The ifIndex value for a ITouch physical link.
               xX25LinkRRDelay 1.3.6.1.4.1.33.20.7.1.2 integer read-write
Number of packets received before an RR will be sent. The value must be less than the xX25CallParmInWindowSize. Modifying this object does not require the X.25 physical link to be restarted. 0 indicates that RR will not be sent.
               xX25LinkIdleTimeout 1.3.6.1.4.1.33.20.7.1.3 integer read-write
Length of time in minutes that a virtual circuit may be idle before the circuit will be cleared. Modifying this object does not require the X.25 physical link to be restarted.
               xX25LinkHoldDownTimer 1.3.6.1.4.1.33.20.7.1.4 integer read-write
Length of time in minutes after a virtual circuit has been cleared before it may make a call again. Modifying this object does not require the X.25 physical link to be restarted.
               xX25LinkAccUncfgCalls 1.3.6.1.4.1.33.20.7.1.5 integer read-write
Indicates whether unconfigured, non-reverse charged calls will be accepted. Modifying this object does not require the X.25 physical link to be restarted. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkDefWindSize 1.3.6.1.4.1.33.20.7.1.6 integer read-write
Default packet level window size for this link.
               xX25LinkMaxWindSize 1.3.6.1.4.1.33.20.7.1.7 integer read-write
Maximum packet level window size for this link.
               xX25LinkDefPktSize 1.3.6.1.4.1.33.20.7.1.8 integer read-write
Default packet size for this link. Enumeration: 'bytes512': 512, 'bytes32': 32, 'bytes2048': 2048, 'bytes16': 16, 'bytes128': 128, 'bytes1024': 1024, 'bytes64': 64, 'bytes4096': 4096, 'bytes256': 256.
               xX25LinkDefThrptClassIn 1.3.6.1.4.1.33.20.7.1.9 integer read-write
Default input throughput class for this link. Enumeration: 'bps300': 300, 'bps48000': 48000, 'bps2400': 2400, 'bps19200': 19200, 'bps600': 600, 'bps150': 150, 'bps4800': 4800, 'bps1200': 1200, 'bps9600': 9600, 'bps75': 75.
               xX25LinkDefThrptClassOut 1.3.6.1.4.1.33.20.7.1.10 integer read-write
Default output throughput class for this link. Enumeration: 'bps300': 300, 'bps48000': 48000, 'bps2400': 2400, 'bps19200': 19200, 'bps600': 600, 'bps150': 150, 'bps4800': 4800, 'bps1200': 1200, 'bps9600': 9600, 'bps75': 75.
               xX25LinkDefThrptClassInMsk 1.3.6.1.4.1.33.20.7.1.11 integer read-write
Default incoming throughput class mask for this link. Enumeration: 'bps300': 300, 'bps48000': 48000, 'bps2400': 2400, 'bps19200': 19200, 'bps600': 600, 'bps150': 150, 'bps4800': 4800, 'bps1200': 1200, 'bps9600': 9600, 'bps75': 75.
               xX25LinkDefThrptClassOutMsk 1.3.6.1.4.1.33.20.7.1.12 integer read-write
Default outgoing throughput class mask for this link. Enumeration: 'bps300': 300, 'bps48000': 48000, 'bps2400': 2400, 'bps19200': 19200, 'bps600': 600, 'bps150': 150, 'bps4800': 4800, 'bps1200': 1200, 'bps9600': 9600, 'bps75': 75.
               xX25LinkFlowCtrlNeg 1.3.6.1.4.1.33.20.7.1.13 integer read-write
Indicates whether flow control negotiation will be performed on this link. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkThrptClassNeg 1.3.6.1.4.1.33.20.7.1.14 integer read-write
Indicates whether throughput class negotiation will be performed on this link. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkICallBarred 1.3.6.1.4.1.33.20.7.1.15 integer read-write
Indicates whether incoming calls are barred on this link. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkOCallBarred 1.3.6.1.4.1.33.20.7.1.16 integer read-write
Indicates whether outgoing calls are barred on this link. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkOneOut 1.3.6.1.4.1.33.20.7.1.17 integer read-write
Indicates whether the link supports one way outgoing channels. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkOneIn 1.3.6.1.4.1.33.20.7.1.18 integer read-write
Indicates whether the link supports one way incoming channels. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkRevChargeAcc 1.3.6.1.4.1.33.20.7.1.19 integer read-write
Indicates whether reverse charge acceptance may be configured on this link. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkLocalChargePrevent 1.3.6.1.4.1.33.20.7.1.20 integer read-write
Indicates whether local charge prevention may be configured on the link. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkRpoa 1.3.6.1.4.1.33.20.7.1.21 integer read-write
Indicates whether RPOA may be configured on the link. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkNui 1.3.6.1.4.1.33.20.7.1.22 integer read-write
Indicates whether NUI may be configured on the link. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkMaxPacketSize 1.3.6.1.4.1.33.20.7.1.23 integer read-write
Maximum size of packets on the link. Enumeration: 'bytes512': 512, 'bytes32': 32, 'bytes16': 16, 'bytes128': 128, 'bytes1024': 1024, 'bytes64': 64, 'bytes256': 256.
               xX25LinkInsertCallingAddr 1.3.6.1.4.1.33.20.7.1.24 integer read-write
Indicates whether the caller's X.121 address should be inserted into the the call request packet. Enumeration: 'disabled': 2, 'enabled': 1.
               xX25LinkDefaultInterface 1.3.6.1.4.1.33.20.7.1.25 integer read-write
The ITouch logical ifIndex to which new SVCs should be attached, when 'accept unconfigured calls' is enabled. A value of zero means 'create a new interface'.