IPV4-MIB: View SNMP OID List / Download MIB

VENDOR: ARROWPOINT COMMUNICATIONS INC.


 Home MIB: IPV4-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, APENT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 apIpv4Mib 1.3.6.1.4.1.2467.1.9.1.1
This MIB module describes the ArrowPoint enterprise MIB support for IPv4 Global Information
 apIpv4SourceRoute 1.3.6.1.4.1.2467.1.9.1.2 integer read-write
If enabled, IP packets with a source route option will be processed. If disabled, they are dropped. Enumeration: 'enable': 1, 'disable': 2.
 apIpv4RecordRoute 1.3.6.1.4.1.2467.1.9.1.3 integer read-write
If enabled, IP packets with a record route option will be processed. If disabled, they are dropped. Enumeration: 'enable': 1, 'disable': 2.
 apIpv4SubnetBcast 1.3.6.1.4.1.2467.1.9.1.4 integer read-write
If enabled, IP packets addressed to a broadcast address of a local subnet will be forwarded. If disabled, they are dropped. Enumeration: 'enable': 1, 'disable': 2.
 apIpv4EcmpMethod 1.3.6.1.4.1.2467.1.9.1.5 integer read-write
Defines the algorithm to use when multiple equal-cost paths are available to the same destination. 'address' uses the IP addresses to assign a path. 'round' does a simple round-robin. Enumeration: 'round': 2, 'address': 1.
 apIpv4OrphanTimer 1.3.6.1.4.1.2467.1.9.1.6 integer read-write
The amount of time, in seconds, that a route will be kept after an SCM recovery. Default is 3 minutes.
 apIpv4LogRouteChanges 1.3.6.1.4.1.2467.1.9.1.7 integer read-write
If enabled, IP route changes will be displayed in the system log. Enumeration: 'enable': 1, 'disable': 2.
 apIpv4ReachRoutes 1.3.6.1.4.1.2467.1.9.1.8 gauge32 read-only
Current number of reachable routes.
 apIpv4ReachRoutesMem 1.3.6.1.4.1.2467.1.9.1.9 gauge32 read-only
Amount of memory used to maintain reachable routes.
 apIpv4TotalRoutes 1.3.6.1.4.1.2467.1.9.1.10 gauge32 read-only
Current number of routes maintainted, both reachable and unreachable.
 apIpv4TotalRoutesMem 1.3.6.1.4.1.2467.1.9.1.11 gauge32 read-only
Amount of memory used to maintain all routes.
 apIpv4ReachHosts 1.3.6.1.4.1.2467.1.9.1.12 gauge32 read-only
Current number of reachable host entries.
 apIpv4ReachHostsMem 1.3.6.1.4.1.2467.1.9.1.13 gauge32 read-only
Amount of memory used to maintain reachable host entries.
 apIpv4TotalHosts 1.3.6.1.4.1.2467.1.9.1.14 gauge32 read-only
Current number of host entries maintainted, both reachable and unreachable.
 apIpv4TotalHostsMem 1.3.6.1.4.1.2467.1.9.1.15 gauge32 read-only
Amount of memory used to maintain all host entries.
 apIpv4PoolMem 1.3.6.1.4.1.2467.1.9.1.16 gauge32 read-only
Amount of memory held in IP routing table pool.
 apIpv4B2BRedundancy 1.3.6.1.4.1.2467.1.9.1.17 truthvalue read-write
Indicates whether box-to-box redundancy is configured on this box.
 apIpv4Opportunistic 1.3.6.1.4.1.2467.1.9.1.18 integer read-write
Indicates the operating mode for layer-3 opportunistic forwarding. In 'local' mode (the default), packets whose IP address equals a resolved node attached to a local subnet will be forwarded to that node regardless of the destination MAC address of the packet. In 'all' mode, packets whose IP address matches any reachable IP routing entry will be forwarded according to the routing entry regardless of the destination MAC address of the packet. In 'disable' mode, only packets whose destination MAC address equal this node's MAC address will be forwarded using an IP route entry. Enumeration: 'all': 2, 'disable': 3, 'local': 1.
 apIpv4RedundancyState 1.3.6.1.4.1.2467.1.9.1.19 integer read-only
The current redundancy state Enumeration: 'master': 3, 'init': 1, 'backup': 2.
 apIpv4RedundancyIf 1.3.6.1.4.1.2467.1.9.1.20 ipaddress read-only
The IP address of the redundant link
 apIpv4RedundancyMaster 1.3.6.1.4.1.2467.1.9.1.21 ipaddress read-only
The IP address of the redundant Master
 apIpv4RedundancyMasterMode 1.3.6.1.4.1.2467.1.9.1.22 truthvalue read-write
Indicates whether box-to-box redundancy is configured to always be the master.
 apIpv4EcmpSticky 1.3.6.1.4.1.2467.1.9.1.23 integer read-write
This object specifies whether when making an ECMP decision on the return port, should the ingress port be the preferred path. Enumeration: 'disabled': 0, 'enabled': 1.
 apIpv4ImplicitService 1.3.6.1.4.1.2467.1.9.1.24 integer read-write
This object specifies whether when configuring a static route, if an implicit service should be started for the next hop address. Enumeration: 'disabled': 0, 'enabled': 1.
 apIpv4RedundancyLinkFailTable 1.3.6.1.4.1.2467.1.9.1.25 no-access
The IP redundancy Interface failure monitor table.
       apIpv4RedundancyLinkFailEntry 1.3.6.1.4.1.2467.1.9.1.25.1 no-access
An entry in the IP redundancy Interface failure monitor table.
           apIpv4RedundancyLinkFailIfIndex 1.3.6.1.4.1.2467.1.9.1.25.1.1 integer read-only
Interface Index used to uniquely identify ethernet interface
           apIpv4RedundancyLinkStatus 1.3.6.1.4.1.2467.1.9.1.25.1.2 rowstatus read-only
Monitor this interface for physical link failure if true
 apIpv4RedundancyFailReason 1.3.6.1.4.1.2467.1.9.1.26 integer read-only
The redundancy state change reason Enumeration: 'phylinkFail': 1, 'noFailure': 0, 'uplinkFailure': 2, 'otherSwitchAssertMaster': 3.
 apIpv4VrrpVRID 1.3.6.1.4.1.2467.1.9.1.27 integer read-only
This object tells virtual router ID in vrrp protocol.
 apIpv4VrrpPriority 1.3.6.1.4.1.2467.1.9.1.28 integer read-only
This object tells virtual router priority in vrrp.
 apIpv4numUplinkServices 1.3.6.1.4.1.2467.1.9.1.29 integer read-only
This object tells number of uplink services enabled.
 apIpv4numViableUplinks 1.3.6.1.4.1.2467.1.9.1.30 integer read-only
This object tells number of uplink services alive.
 apIpv4numPhylinkMarked 1.3.6.1.4.1.2467.1.9.1.31 integer read-only
This object tells number of redundant-physical links monitored.
 apIpv4toMasterStateCnt 1.3.6.1.4.1.2467.1.9.1.32 integer read-only
This object tells number of times the box become master.
 apIpv4toBackupStateCnt 1.3.6.1.4.1.2467.1.9.1.33 integer read-only
This object tells number of times the box become backup.
   apIpv4RedundancyTrap 1.3.6.1.4.1.2467.1.9.10.1
This trap is generated when the state of Redundancy changes.