IPADv2-MIB: View SNMP OID List / Download MIB

VENDOR: VERILINK CORP


 Home MIB: IPADv2-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, DS8200v2-TC-MIB, DS8200v2-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ipad 1.3.6.1.4.1.321.100.1
IPADv2.MIB updated for SNMPv2.
     ipadFrPort 1.3.6.1.4.1.321.100.1.1
         ipadFrPortTable 1.3.6.1.4.1.321.100.1.1.1 no-access
Table of frame relay port parameters.
             ipadFrPortTableEntry 1.3.6.1.4.1.321.100.1.1.1.1 no-access
An entry in the ipad frame relay port table.
                 ipadFrPortService 1.3.6.1.4.1.321.100.1.1.1.1.1 integer read-only
Index into the ipad frame relay port table; an entry in the ipad service table.
                 ipadFrPortActive 1.3.6.1.4.1.321.100.1.1.1.1.2 integer read-only
Specifies if the port is active. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadFrPortLMIType 1.3.6.1.4.1.321.100.1.1.1.1.3 integer read-only
Specifies the link management information type used on this port. Enumeration: 'ansi': 3, 'ccitt': 2, 'other': 1, 'none': 5, 'lmi': 4.
                 ipadFrPortLMIMode 1.3.6.1.4.1.321.100.1.1.1.1.4 integer read-only
Specifies the link management information mode used on this port. Enumeration: 'sourcing': 2, 'other': 1, 'monitoring': 3.
                 ipadFrPortRxInvAlmThreshold 1.3.6.1.4.1.321.100.1.1.1.1.5 integer read-write
Sets the rx invalid frames alarm threshold. Setting this field to 0 disables the alarm.
                 ipadFrPortRxInvAlmAlarm 1.3.6.1.4.1.321.100.1.1.1.1.6 integer read-only
Reports if the invalid frames threshold has been exceeded. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                 ipadFrPortTxAlmThreshold 1.3.6.1.4.1.321.100.1.1.1.1.7 integer read-write
Sets the tx throughput alarm threshold (in bits/second). Setting this field to 0 disables the alarm.
                 ipadFrPortTxAlmAlarm 1.3.6.1.4.1.321.100.1.1.1.1.8 integer read-only
Reports if the tx throughput threshold has been exceeded. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                 ipadFrPortRxAlmThreshold 1.3.6.1.4.1.321.100.1.1.1.1.9 integer read-write
Sets the rx throughput alarm threshold (in bits/second). Setting this field to 0 disables the alarm.
                 ipadFrPortRxAlmAlarm 1.3.6.1.4.1.321.100.1.1.1.1.10 integer read-only
Reports if the rx throughput threshold has been exceeded. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                 ipadFrPortAlarmReset 1.3.6.1.4.1.321.100.1.1.1.1.11 integer read-write
This is used to clear the current alarm counts. Enumeration: 'frPortAlarmResetClearStats': 3, 'frPortAlarmResetOther': 1, 'frPortAlarmResetClearAlarms': 2.
     ipadService 1.3.6.1.4.1.321.100.1.2
         ipadServiceTable 1.3.6.1.4.1.321.100.1.2.1 no-access
The ipad service table.
             ipadServiceTableEntry 1.3.6.1.4.1.321.100.1.2.1.1 no-access
An entry in the ipad service table.
                 ipadServiceIndex 1.3.6.1.4.1.321.100.1.2.1.1.1 integer read-only
The index for the ipad service table.
                 ipadServiceifIndex 1.3.6.1.4.1.321.100.1.2.1.1.2 integer read-write
The MIB-II ifIndex for this service. Enumeration: 'user2': 5, 'auxiliary': 7, 'user1': 4, 'atmCES': 9, 'virtual': 100, 'disabled': 0, 'ethernet': 6, 'supervisor': 1, 'modem': 10, 'network2': 3, 'network3': 8, 'network1': 2.
                 ipadServiceType 1.3.6.1.4.1.321.100.1.2.1.1.3 integer read-write
The type of this service. Enumeration: 'tty': 9, 'tdm': 2, 'parallelIO': 11, 'ip': 7, 'atm': 12, 'ppp': 3, 'frameRelay': 5, 'frameRelayMonitor': 6, 'atmCES': 14, 'pppMonitor': 4, 'serial': 8, 'modem': 15, 'other': 1, 'hdlcPPP': 13, 'scada': 10.
                 ipadServicePair 1.3.6.1.4.1.321.100.1.2.1.1.4 integer read-write
An entry in this table, which establishes a service pairing.
                 ipadServiceStatus 1.3.6.1.4.1.321.100.1.2.1.1.5 integer read-only
This parameter indicates the status of the service. idle - The service is not doing anything or has not been configured for use. down - The physical layer for the service is not ready. training - The physical layer is not ready but is attempting to come up. connecting - The physical layer is not ready but is attempting to come up. physicalUp - The physical layer is ready the service is not ready. protocolUp - The service is able to pass data. dead - The service is inactive because no resources are available to support it. changed - Service parameters were changed and require a save and restart to take effect. Enumeration: 'training': 8, 'protocolUp': 5, 'physicalUp': 4, 'changed': 7, 'dead': 6, 'down': 3, 'idle': 2, 'other': 1, 'connecting': 9.
         ipadServiceAddService 1.3.6.1.4.1.321.100.1.2.2 integer read-write
Adds a row to the Service Table. Enumeration: 'addService': 1.
         ipadServiceDeleteService 1.3.6.1.4.1.321.100.1.2.3 integer read-write
Identifies a Service to be deleted; an index into the Service Table.
     ipadChannel 1.3.6.1.4.1.321.100.1.3
         ipadChannelTable 1.3.6.1.4.1.321.100.1.3.1 no-access
The ipad channel table.
             ipadChannelTableEntry 1.3.6.1.4.1.321.100.1.3.1.1 no-access
An entry in the ipad channel table.
                 ipadChannelifIndex 1.3.6.1.4.1.321.100.1.3.1.1.1 integer read-only
Primary index into ipad channel table, MIB-II ifIndex.
                 ipadChannelIndex 1.3.6.1.4.1.321.100.1.3.1.1.2 integer read-only
Channel index for the physical interface.
                 ipadChannelService 1.3.6.1.4.1.321.100.1.3.1.1.3 integer read-write
Index into service table for this channel.
                 ipadChannelPair 1.3.6.1.4.1.321.100.1.3.1.1.4 integer read-write
Pair for this channel; an entry in the channel table. Use service pair in service table to determine which service contains this channel.
                 ipadChannelRate 1.3.6.1.4.1.321.100.1.3.1.1.5 integer read-write
Rate for this channel. Enumeration: 'other': 1, 'rate56': 2, 'rate64': 3, 'rate8': 4.
                 ipadChannelIdlePattern 1.3.6.1.4.1.321.100.1.3.1.1.6 integer read-only
Idle pattern for this channel.
     ipadDLCI 1.3.6.1.4.1.321.100.1.4
         ipadDLCITable 1.3.6.1.4.1.321.100.1.4.1 no-access
The ipad DLCI table.
             ipadDLCITableEntry 1.3.6.1.4.1.321.100.1.4.1.1 no-access
An entry in the ipad DLCI table.
                 ipadDLCIservice 1.3.6.1.4.1.321.100.1.4.1.1.1 integer read-only
An index into the ipad service table.
                 ipadDLCInumber 1.3.6.1.4.1.321.100.1.4.1.1.2 integer read-only
The DLCI number for this entry.
                 ipadDLCIactive 1.3.6.1.4.1.321.100.1.4.1.1.3 integer read-only
Specifies if the DLCI is active. Enumeration: 'yes': 3, 'other': 1, 'pending': 4, 'no': 2.
                 ipadDLCIcongestion 1.3.6.1.4.1.321.100.1.4.1.1.4 integer read-only
Specifies if the dlci is receiving frames with FECN or BECN bit set. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadDLCIremote 1.3.6.1.4.1.321.100.1.4.1.1.5 integer read-only
Remote DLCI number.
                 ipadDLCIremoteUnit 1.3.6.1.4.1.321.100.1.4.1.1.6 displaystring read-only
Name of the remote DLCI.
                 ipadDLCIremoteEquipActive 1.3.6.1.4.1.321.100.1.4.1.1.7 integer read-only
Reports if the equipment attached to the remote unit is active. Enumeration: 'inactive': 2, 'active': 3, 'sosAlarm': 4, 'other': 1.
                 ipadDLCIencapsulation 1.3.6.1.4.1.321.100.1.4.1.1.8 integer read-write
Type of protocol encapsulation used on this DLCI. Enumeration: 'rfc1490': 2, 'other': 1, 'proprietary': 3, 'rfc1490withEncryption': 4, 'rfc1490withCompression': 5.
                 ipadDLCIproprietary 1.3.6.1.4.1.321.100.1.4.1.1.9 integer read-write
When the encapsulation is proprietary, the traffic type must be configured to gather protocol specific statistics. Enumeration: 'ip': 2, 'ipx': 3, 'other': 1, 'none': 5, 'ethertype': 4.
                 ipadDLCIpropOffset 1.3.6.1.4.1.321.100.1.4.1.1.10 integer read-write
When the encapsulation is proprietary, this is the number of bytes after the frame relay header to look for the specified protocol decode.
                 ipadDLCIinBand 1.3.6.1.4.1.321.100.1.4.1.1.11 integer read-write
Determines if frames on this DLCI will be parsed to look for management frames destined for the unit itself. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadDLCICIR 1.3.6.1.4.1.321.100.1.4.1.1.12 integer read-write
Default committed information rate in bits per second.
                 ipadDLCIBe 1.3.6.1.4.1.321.100.1.4.1.1.13 integer read-write
Default excess burst rate in bits per second.
                 ipadDLCIminBC 1.3.6.1.4.1.321.100.1.4.1.1.14 integer read-write
If the corresponding interface is configured to enable congestion management, the minimum transfer rate at which the unit will throttle back offering data to the network.
                 ipadDLCIrxMon 1.3.6.1.4.1.321.100.1.4.1.1.15 integer read-write
Determines if the SLA parameters will be monitored for received frames. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadDLCIdEctrl 1.3.6.1.4.1.321.100.1.4.1.1.16 integer read-write
Determines if the Rx monitor will set the DE bit on all frames received in excess of the CIR before they are switched to their destination port. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadDLCIenableDelay 1.3.6.1.4.1.321.100.1.4.1.1.17 integer read-write
Enable or disable delay. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                 ipadDLCItxExCIRThreshold 1.3.6.1.4.1.321.100.1.4.1.1.18 integer read-write
Sets the Tx over CIR alarm threshold. This threshold is the number of bits per second in excess of CIR. Setting this field to 0 disables the alarm.
                 ipadDLCItxExCIRAlarm 1.3.6.1.4.1.321.100.1.4.1.1.19 integer read-only
Reports if the Tx over CIR threshold has been exceeded. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                 ipadDLCItxExBeThreshold 1.3.6.1.4.1.321.100.1.4.1.1.20 integer read-write
Sets the Tx over Be alarm threshold. This threshold is the number of bits per second in excess of Be. Setting this field to 0 disables the alarm.
                 ipadDLCItxExBeAlarm 1.3.6.1.4.1.321.100.1.4.1.1.21 integer read-only
Reports if the Tx over Be threshold has been exceeded. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                 ipadDLCIrxCongThreshold 1.3.6.1.4.1.321.100.1.4.1.1.22 integer read-write
Sets the Rx congestion alarm threshold. This threshold is the number of frames received with BECN/FECN. Setting this field to 0 disables the alarm.
                 ipadDLCIrxCongAlarm 1.3.6.1.4.1.321.100.1.4.1.1.23 integer read-only
Reports if the Rx congestion threshold has been exceeded. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                 ipadDLCIrxBECNinCIR 1.3.6.1.4.1.321.100.1.4.1.1.24 integer read-only
Reports if BECN has been received within CIR. Enumeration: 'noAlarm': 2, 'other': 1, 'alarmCondition': 3.
                 ipadDLCIUASThreshold 1.3.6.1.4.1.321.100.1.4.1.1.25 integer read-write
Sets the UAS (unavailable seconds) alarm threshold. This threshold is the number of seconds passed that the DLCI is unavailable. Setting this field to 0 disables the alarm.
                 ipadDLCIUASAlarm 1.3.6.1.4.1.321.100.1.4.1.1.26 integer read-only
Reports if the UAS threshold has been exceeded. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                 ipadDLCIAlarmReset 1.3.6.1.4.1.321.100.1.4.1.1.27 integer read-write
This is used to clear the current alarm counts. Enumeration: 'dlciAlarmResetClearAlarms': 2, 'dlciAlarmResetClearStats': 3, 'dlciAlarmResetOther': 1.
                 ipadDLCIRoundTripDelaySize 1.3.6.1.4.1.321.100.1.4.1.1.28 integer read-write
Specifies the packet size in octets used to calculate round trip delay.
                 ipadDLCIRoundTripDelayRate 1.3.6.1.4.1.321.100.1.4.1.1.29 integer read-write
Specifies the packet rate in seconds used to calculate round trip delay.
                 ipadDLCIRemoteFramesOfferedWithinCIR 1.3.6.1.4.1.321.100.1.4.1.1.30 integer read-only
Count of frames sent within CIR from the remote end of the DLCI.
                 ipadDLCIRemoteFramesOfferedWithinBE 1.3.6.1.4.1.321.100.1.4.1.1.31 integer read-only
Count of frames sent within BE, but over CIR, from the remote end of the DLCI.
                 ipadDLCIFramesReceived 1.3.6.1.4.1.321.100.1.4.1.1.32 integer read-only
Count of frames received by the local device on this DLCI.
                 ipadDLCIRemoteDataOfferedWithinCIR 1.3.6.1.4.1.321.100.1.4.1.1.33 integer read-only
Count of data octets sent within CIR from the remote end of the DLCI.
                 ipadDLCIRemoteDataOfferedWithinBE 1.3.6.1.4.1.321.100.1.4.1.1.34 integer read-only
Count of data octets sent within BE, but over CIR, from the remote end of the DLCI.
                 ipadDLCIDataReceived 1.3.6.1.4.1.321.100.1.4.1.1.35 integer read-only
Count of data octets received by the local device on this DLCI.
                 ipadDLCIRemoteIPAddress 1.3.6.1.4.1.321.100.1.4.1.1.36 ipaddress read-only
The IP Address of the device on the remote end of this DLCI. This information is only valid when the remote device supports Verilink's proprietary message exchange.
                 ipadDLCICompressionStatus 1.3.6.1.4.1.321.100.1.4.1.1.37 integer read-only
This is the current status of the compression engine for this DLCI. disabled(2) indicates that the compression engine is disabled. enabledAndNegotiated(3) indicates that compression is enabled, and has been successfully negotiated with the device at the other end. enabledButNotNegotiated(4) indicated that compression is enabled, but has not been successfully negotiated with the device at the other end. This may be due to the DLCI being down, the other device not having compression enabled or other factors which would inhibit communication. Enumeration: 'disabled': 2, 'other': 1, 'enabledButNotNegotiated': 4, 'enabledAndNegotiated': 3.
                 ipadDLCICompressionTxOctetsIn 1.3.6.1.4.1.321.100.1.4.1.1.38 integer read-only
This is a rolling counter of the number of octets given to the compression engine.
                 ipadDLCICompressionTxOctetsOut 1.3.6.1.4.1.321.100.1.4.1.1.39 integer read-only
This is a rolling counter of the number of octets output from the compression engine.
                 ipadDLCICompressionRxOctetsIn 1.3.6.1.4.1.321.100.1.4.1.1.40 integer read-only
This is a rolling counter of the number of octets given to the compression engine.
                 ipadDLCICompressionRxOctetsOut 1.3.6.1.4.1.321.100.1.4.1.1.41 integer read-only
This is a rolling counter of the number of octets given to the compression engine.
         ipadDLCILastChange 1.3.6.1.4.1.321.100.1.4.2 timeticks read-only
Time of the last change in the DLCI table.
     ipadEndpoint 1.3.6.1.4.1.321.100.1.5
         ipadEndpointTable 1.3.6.1.4.1.321.100.1.5.1 no-access
The ipad endpoint table.
             ipadEndpointTableEntry 1.3.6.1.4.1.321.100.1.5.1.1 no-access
An entry in the ipad endpoint table.
                 ipadEndpointIndex 1.3.6.1.4.1.321.100.1.5.1.1.1 integer read-only
The index into the ipad endpoint table.
                 ipadEndpointName 1.3.6.1.4.1.321.100.1.5.1.1.2 displaystring read-write
The name for the endpoint.
                 ipadEndpointService 1.3.6.1.4.1.321.100.1.5.1.1.3 integer read-write
An index into the ipad service table.
                 ipadEndpointDLCInumber 1.3.6.1.4.1.321.100.1.5.1.1.4 integer read-write
Data link connection identifier for this endpoint; The DLCI number for this entry.
                 ipadEndpointType 1.3.6.1.4.1.321.100.1.5.1.1.5 integer read-write
Endpoint type. Enumeration: 'ipRoute': 4, 'other': 1, 'frSwitched': 3, 'frLocal': 2.
                 ipadEndpointForward 1.3.6.1.4.1.321.100.1.5.1.1.6 integer read-write
Index into the endpoint names table. This is the endpoint on which data should be forwarded for switched endpoints.
                 ipadEndpointBackup 1.3.6.1.4.1.321.100.1.5.1.1.7 integer read-write
Index into the endpoint table. This is the endpoint on which data should be forwarded in the case where the endpoint becomes inactive.
                 ipadEndpointRefSLP 1.3.6.1.4.1.321.100.1.5.1.1.8 integer read-write
Index into the endpoint table. The service level parameters can be copied from another configured endpoint.
                 ipadEndpointRemoteIpAddr 1.3.6.1.4.1.321.100.1.5.1.1.9 ipaddress read-write
IP address for remote.
                 ipadEndpointRemoteIpMask 1.3.6.1.4.1.321.100.1.5.1.1.10 ipaddress read-write
IP address mask for remote.
         ipadEndpointAddEndpoint 1.3.6.1.4.1.321.100.1.5.2 displaystring read-write
Identifies an Endpoint to be added.
         ipadEndpointDeleteEndpoint 1.3.6.1.4.1.321.100.1.5.3 displaystring read-write
Identifies an Endpoint to be deleted.
         ipadEndpointLastChange 1.3.6.1.4.1.321.100.1.5.4 timeticks read-only
Time of the last change in the Endpoint table.
     ipadUser 1.3.6.1.4.1.321.100.1.6
         ipadUserTable 1.3.6.1.4.1.321.100.1.6.1 no-access
Table of user selected parameters.
             ipadUserTableEntry 1.3.6.1.4.1.321.100.1.6.1.1 no-access
An entry in the ipad user table.
                 ipadUserIndex 1.3.6.1.4.1.321.100.1.6.1.1.1 integer read-only
Index into the ipad user table.
                 ipadUserFilterByDLCI 1.3.6.1.4.1.321.100.1.6.1.1.2 integer read-write
Enables Service+DLCI filtering for this user statistic. Enumeration: 'disabled': 1, 'enabled': 2.
                 ipadUserService 1.3.6.1.4.1.321.100.1.6.1.1.3 integer read-write
Specifies the service for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserDLCI. Meaningful when ipadUserFilterByDLCI is enabled. Meaningless when collecting PPP statistics.
                 ipadUserDLCI 1.3.6.1.4.1.321.100.1.6.1.1.4 integer read-write
Specifies the DLCI for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserService. Meaningful when ipadUserFilterByDLCI is enabled. Meaningless when collecting PPP statistics.
                 ipadUserFilterByIPAddress 1.3.6.1.4.1.321.100.1.6.1.1.5 integer read-write
Enables IP address filtering for this user statistic. A packet is counted towards the user statistics if the result of a bitwise-and of an IP address in a transmitted packet with ipadUserIPMask equals ipadUserIPAddress. Enumeration: 'disabled': 1, 'enabled': 2.
                 ipadUserIPAddress 1.3.6.1.4.1.321.100.1.6.1.1.6 ipaddress read-write
Specifies the IP address for this user type.
                 ipadUserIPMask 1.3.6.1.4.1.321.100.1.6.1.1.7 ipaddress read-write
Specifies the IP address mask for this user type.
                 ipadUserFilterByIPPort 1.3.6.1.4.1.321.100.1.6.1.1.8 integer read-write
Enables IP Port filtering for this user statistic. Enumeration: 'disabled': 1, 'enabled': 2.
                 ipadUserIPPort 1.3.6.1.4.1.321.100.1.6.1.1.9 integer read-write
Specifies the IP port for this user type. Enumeration: 'domain': 53, 'atecho': 204, 'smtp': 25, 'gopher': 70, 'echo': 7, 'snmptrap': 162, 'netwareip': 396, 'sunrpc': 111, 'ipx': 213, 'atnbp': 202, 'systat': 11, 'ftp': 21, 'netbiosssn': 139, 'uucp': 540, 'ftpdata': 20, 'uucprlogin': 541, 'hostname': 101, 'snmp': 161, 'ipcserver': 600, 'send': 169, 'netwall': 533, 'finger': 79, 'snpp': 444, 'povray': 494, 'netbiosdgm': 138, 'cmipman': 163, 'irc': 194, 'nntp': 119, 'atzis': 206, 'rtelnet': 107, 'sqlnet': 66, 'http': 80, 'netbiosns': 137, 'kerberos': 88, 'telnet': 23, 'pop3': 110, 'pop2': 109, 'rje': 5, 'cmipagent': 164, 'auth': 113, 'npp': 92, 'msgauth': 31, 'qotd': 17, 'atrtmp': 201, 'netcp': 395, 'bgp': 179, 'sgmp': 153, 'kerberosadm': 749, 'time': 37, 'tftp': 69, 'nameserver': 42.
                 ipadUserTxAlmThreshold 1.3.6.1.4.1.321.100.1.6.1.1.10 integer read-write
Sets the tx throughput alarm threshold in bits per second. Setting this field to 0 disables the alarm.
                 ipadUserTxAlmAlarm 1.3.6.1.4.1.321.100.1.6.1.1.11 integer read-only
Reports if the tx throughput threshold has been exceeded. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                 ipadUserAlarmReset 1.3.6.1.4.1.321.100.1.6.1.1.12 integer read-write
This is used to clear the current alarm counts. Enumeration: 'userAlarmResetClearStats': 3, 'userAlarmResetOther': 1, 'userAlarmResetClearAlarms': 2.
                 ipadUserVpi 1.3.6.1.4.1.321.100.1.6.1.1.13 integer read-write
Specifies the Vpi for this user type; identifies a VC when combined with the ipadUserService and ipadUserVci objects. Meaningful when ipadUserFilterByVpiVci is enabled. Meaningless when collecting PPP or Frame Relay statistics.
                 ipadUserVci 1.3.6.1.4.1.321.100.1.6.1.1.14 integer read-write
Specifies the Vci for this user type; identifies a VC when combined with the ipadUserService and ipadUserVpi objects. Meaningful when ipadUserFilterByVpiVci is enabled. Meaningless when collecting PPP or Frame Relay statistics.
                 ipadUserFilterByVpiVci 1.3.6.1.4.1.321.100.1.6.1.1.15 integer read-write
Enables Vpi/Vci filtering for this user statistic. A packet is counted towards the user statistics if the packet is transmitted on the service/Vpi/Vci combindation specified by ipadUserService, ipadUserVpi, and ipadUserVci. Enumeration: 'disabled': 1, 'enabled': 2.
         ipadUserIPStatTimeRemaining 1.3.6.1.4.1.321.100.1.6.2 integer read-write
Specifies seconds until the next IP TopN report is generated.
         ipadUserIPStatTimeDuration 1.3.6.1.4.1.321.100.1.6.3 integer read-only
The value of TimeRemaining when TimeRemaining was last set. Indicates the number of seconds that the next IP TopN report will cover.
         ipadUserIPStatStartTime 1.3.6.1.4.1.321.100.1.6.4 timeticks read-only
The value of SysUpTime when TimeRemaining was last set.
         ipadUserIPStatRequestedReportSize 1.3.6.1.4.1.321.100.1.6.5 integer read-write
Determines the requested maximum number of entries in the topN report.
         ipadUserIPStatGrantedReportSize 1.3.6.1.4.1.321.100.1.6.6 integer read-only
Determines the granted number of entries in the topN report. This is by definition less than or equal to requested report size.
         ipadUserIPStatReportNumber 1.3.6.1.4.1.321.100.1.6.7 integer read-only
Specifies the number of reports that have been generated. This value resets to zero when the unit is restarted.
         ipadUserIPStatDiscardType 1.3.6.1.4.1.321.100.1.6.8 integer read-write
The internal table used to track TopN statistics is finite in size. On the condition when the internal table is full and a new IP address is encountered, an element already existing in the table must be removed. This variable determines the manner of selection. Writing byTime(1) will cause the entry with the least recent frame to be discarded. That is, all other entries in the table will have transmitted or received at least one packet more recently. Writing byFrames(2) will select the entry with the fewest transmitted or received frames. Writing byOctets(3) will select the entry with the fewest transmitted or received octets. The default is byTime(1). Enumeration: 'byTime': 1, 'byOctets': 3, 'byFrames': 2.
     ipadPPP 1.3.6.1.4.1.321.100.1.7
         ipadPPPCfgTable 1.3.6.1.4.1.321.100.1.7.1 no-access
The ipad PPP configuration table.
             ipadPPPCfgTableEntry 1.3.6.1.4.1.321.100.1.7.1.1 no-access
An entry in the ipad PPP configuration table.
                 ipadPPPCfgService 1.3.6.1.4.1.321.100.1.7.1.1.1 integer read-only
The index into the PPP configuration table; an entry in the ipad service table.
                 ipadPPPCfgDialMode 1.3.6.1.4.1.321.100.1.7.1.1.2 integer read-write
Determines the permancency of a communications connection. Enumeration: 'dialup': 3, 'other': 1, 'direct': 2, 'demanddial': 4.
                 ipadPPPCfgInactivityTimer 1.3.6.1.4.1.321.100.1.7.1.1.3 integer read-write
Determines when a dial-up or demand-dial connection will be disconnected due to inactivity in both directions. When this parameter is set to zero then the timer is disabled.
                 ipadPPPCfgNegotiationInit 1.3.6.1.4.1.321.100.1.7.1.1.4 integer read-write
Determines if the port waits for the other end to initiate parameter negotiations. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgMRU 1.3.6.1.4.1.321.100.1.7.1.1.5 integer read-write
The maximum receive unit the interface will accept. Valid values are in the range 128 - 4096, default is 1500.
                 ipadPPPCfgACCM 1.3.6.1.4.1.321.100.1.7.1.1.6 integer read-write
Sets the async control character map used when generating async HDLC frames. Setting a bit in the map causes the corresponding character to be mapped for transparency.
                 ipadPPPCfgNegMRU 1.3.6.1.4.1.321.100.1.7.1.1.7 integer read-write
Determines if MRU size is negotiated. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgNegACCM 1.3.6.1.4.1.321.100.1.7.1.1.8 integer read-write
Determines if ACCM is negotiated. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgNegMagic 1.3.6.1.4.1.321.100.1.7.1.1.9 integer read-write
Determines if the magic number is negotiated. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgNegCompression 1.3.6.1.4.1.321.100.1.7.1.1.10 integer read-write
Determines if the PPP protocol header compression is negotiated. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgNegAddress 1.3.6.1.4.1.321.100.1.7.1.1.11 integer read-write
Determines if the PPP HDLC header compression is negotiated. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgNegPAP 1.3.6.1.4.1.321.100.1.7.1.1.12 integer read-write
Determines if PAP is negotiated with the peer when a more secure authentication protocol is rejected. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgNegCHAP 1.3.6.1.4.1.321.100.1.7.1.1.13 integer read-write
Determines if CHAP is negotiated with the peer when a more secure authentication protocol is rejected. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgAllowPAP 1.3.6.1.4.1.321.100.1.7.1.1.14 integer read-write
Determines if PAP is allowed to be negotiated by the peer. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgAllowCHAP 1.3.6.1.4.1.321.100.1.7.1.1.15 integer read-write
Determines if CHAP is allowed to be negotiated by the peer. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgPAPUsername 1.3.6.1.4.1.321.100.1.7.1.1.16 displaystring read-write
Identification string to determine the user identity.
                 ipadPPPCfgPAPPassword 1.3.6.1.4.1.321.100.1.7.1.1.17 displaystring read-write
Password string to validate the user identity.
                 ipadPPPCfgCHAPUsername 1.3.6.1.4.1.321.100.1.7.1.1.18 displaystring read-write
Identification string to determine the user identity.
                 ipadPPPCfgCHAPSecret 1.3.6.1.4.1.321.100.1.7.1.1.19 displaystring read-write
Password string to validate the user identity.
                 ipadPPPCfgPortIpAddress 1.3.6.1.4.1.321.100.1.7.1.1.20 ipaddress read-write
Sets the IP address of the unit's port.
                 ipadPPPCfgPeerIpAddress 1.3.6.1.4.1.321.100.1.7.1.1.21 ipaddress read-write
Sets the IP address of the unit's peer.
                 ipadPPPCfgNegIpAddress 1.3.6.1.4.1.321.100.1.7.1.1.22 integer read-write
Determines if IP addresses are dynamically negotiated. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgNegIPCPCompression 1.3.6.1.4.1.321.100.1.7.1.1.23 integer read-write
Determines if Van Jacobson TCPIP header compression is negotiated. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgSubnetMask 1.3.6.1.4.1.321.100.1.7.1.1.24 ipaddress read-write
Specifies the subnet mask.
                 ipadPPPCfgAuthChallengeInterval 1.3.6.1.4.1.321.100.1.7.1.1.25 integer read-write
Specifies the authentication challenge interval.
                 ipadPPPCfgEndpoint 1.3.6.1.4.1.321.100.1.7.1.1.26 displaystring read-write
Endpoint name to run PPP over another protocol.
                 ipadPPPCfgNegIpMask 1.3.6.1.4.1.321.100.1.7.1.1.27 integer read-write
Determines if the subnet Mask is negotiated. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                 ipadPPPCfgNegDNSAddress 1.3.6.1.4.1.321.100.1.7.1.1.28 integer read-write
Determines if the DNS address is negotiated. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
         ipadPPPPAPTable 1.3.6.1.4.1.321.100.1.7.2 no-access
Table of PAP authentication parameters.
             ipadPPPPAPTableEntry 1.3.6.1.4.1.321.100.1.7.2.1 no-access
An entry in the ipad PPP PAP table.
                 ipadPPPPAPTableIndex 1.3.6.1.4.1.321.100.1.7.2.1.1 integer read-only
The index into the PPP PAP association table.
                 ipadPPPPAPTableUsername 1.3.6.1.4.1.321.100.1.7.2.1.2 displaystring read-write
Identification string to identify the user.
                 ipadPPPPAPTablePassword 1.3.6.1.4.1.321.100.1.7.2.1.3 displaystring read-write
Password string to validate the user identity.
         ipadPPPCHAPTable 1.3.6.1.4.1.321.100.1.7.3 no-access
Table of CHAP authentication parameters.
             ipadPPPCHAPTableEntry 1.3.6.1.4.1.321.100.1.7.3.1 no-access
An entry in the ipad PPP CHAP table.
                 ipadPPPCHAPTableIndex 1.3.6.1.4.1.321.100.1.7.3.1.1 integer read-only
The index into the PPP CHAP association table.
                 ipadPPPCHAPTableUsername 1.3.6.1.4.1.321.100.1.7.3.1.2 displaystring read-write
Identification string to identify the user.
                 ipadPPPCHAPTableSecret 1.3.6.1.4.1.321.100.1.7.3.1.3 displaystring read-write
Password string to validate the user identity.
     ipadModem 1.3.6.1.4.1.321.100.1.8
         ipadModemDialTable 1.3.6.1.4.1.321.100.1.8.1 no-access
Table of modem dialing parameters.
             ipadModemDialTableEntry 1.3.6.1.4.1.321.100.1.8.1.1 no-access
An entry in the ipad modem dialing parameters table.
                 ipadModemDialTableIndex 1.3.6.1.4.1.321.100.1.8.1.1.1 integer read-only
The index into the ipad modem dialing parameters table. Equivalent to MIB-II ifIndex.
                 ipadModemDialDataIndex 1.3.6.1.4.1.321.100.1.8.1.1.2 integer read-write
An index into the Modem Data Table, which selects a modem.
                 ipadModemDialNumber 1.3.6.1.4.1.321.100.1.8.1.1.3 displaystring read-write
Specifies the telephone number to dial.
                 ipadModemDialAbortTimer 1.3.6.1.4.1.321.100.1.8.1.1.4 integer read-write
Aborts a connection attempt if a dial-up connection has failed to connect within the specified number of seconds. Range is 1..255.
                 ipadModemDialRedialAttempts 1.3.6.1.4.1.321.100.1.8.1.1.5 integer read-write
Determines how many attempts to initiate a dial-up connection after the initial failure. Range is 0..10.
                 ipadModemDialDelayBeforeRedial 1.3.6.1.4.1.321.100.1.8.1.1.6 integer read-write
Specifies the number of seconds to wait before redialing. Range is 1..255.
                 ipadModemDialLoginScript 1.3.6.1.4.1.321.100.1.8.1.1.7 displaystring read-write
Script string interpreted after an originated dial-up connection is first established.
                 ipadModemDialUsername 1.3.6.1.4.1.321.100.1.8.1.1.8 displaystring read-write
Identification string to determine the user identity.
                 ipadModemDialPassword 1.3.6.1.4.1.321.100.1.8.1.1.9 displaystring read-write
Password string to validate the user identity.
                 ipadModemDialChallengeScript 1.3.6.1.4.1.321.100.1.8.1.1.10 displaystring read-write
Script string interpreted after an answered dial-up connection is first established.
                 ipadModemDialAnswerRings 1.3.6.1.4.1.321.100.1.8.1.1.11 integer read-write
Answers an incoming call on the given number of rings. A value of zero disables answering. Range is 0..255.
                 ipadModemDialCommand 1.3.6.1.4.1.321.100.1.8.1.1.12 integer read-write
The set values perform the following actions: setupNow - Execute the modem setup scripts dialNow - Initiate dialing procedures answerNow - Initiate answering procedures disconnectNow - Initiate disconnect procedures Enumeration: 'dialNow': 3, 'other': 1, 'setupNow': 2, 'disconnectNow': 5, 'answerNow': 4.
                 ipadModemDialStatus 1.3.6.1.4.1.321.100.1.8.1.1.13 integer read-only
This object reports the current activity of the modem control feature disabled - The feature is not enabled setup - The feature is configuring the modem error - The feature could not setup the modem idle - The feature is ready to operate dialing - The feature is placing a call dialWait - The feature is between call attempts ringing - The feature is waiting for an incoming call to connect or go away answering - The feature is answering a call negotiating - The feature is negotiating the login security online - The feature data path is connected disconnecting - The feature is disconnecting a call awaitingCallback - The feature is waiting for a security callback Enumeration: 'error': 9, 'ringing': 13, 'setup': 10, 'answering': 5, 'negotiating': 6, 'disabled': 2, 'idle': 3, 'other': 1, 'dialWait': 12, 'online': 7, 'dialing': 4, 'awaitingCallback': 11, 'disconnecting': 8.
                 ipadModemDialSecurity 1.3.6.1.4.1.321.100.1.8.1.1.14 integer read-write
disable - Dial-up security not enabled password - Challenge/Login password scripts used callback - Password security followed by answerer calling back callbackVerify - Callback and verify using the callback challenge/response scripts Enumeration: 'callback': 4, 'password': 3, 'other': 1, 'callbackVerify': 5, 'disable': 2.
                 ipadModemDialCallbackRedialDelay 1.3.6.1.4.1.321.100.1.8.1.1.15 integer read-write
Specifies the number of seconds to wait before redialing. Range is 1..255.
                 ipadModemDialCallbackTimeout 1.3.6.1.4.1.321.100.1.8.1.1.16 integer read-write
This object sets the number of seconds to wait for a security callback before failing the connection attempt.
                 ipadModemDialCallbackChalScript 1.3.6.1.4.1.321.100.1.8.1.1.17 displaystring read-write
Callback security challenge script interpreted after originating a callback dial-up connection.
                 ipadModemDialCallbackRspScript 1.3.6.1.4.1.321.100.1.8.1.1.18 displaystring read-write
Callback security challenge response script interpreted after answering a callback dial-up connection.
         ipadModemDataTable 1.3.6.1.4.1.321.100.1.8.2 no-access
Table of modem database parameters.
             ipadModemDataTableEntry 1.3.6.1.4.1.321.100.1.8.2.1 no-access
An entry in the ipad modem database parameters table.
                 ipadModemDataTableIndex 1.3.6.1.4.1.321.100.1.8.2.1.1 integer read-only
The index into the ipad modem database parameters table.
                 ipadModemDataModemName 1.3.6.1.4.1.321.100.1.8.2.1.2 displaystring read-write
Identification string for the modem database.
                 ipadModemDataSetupScript 1.3.6.1.4.1.321.100.1.8.2.1.3 displaystring read-write
First script interpreted when a modem port is initialized.
                 ipadModemDataDialingScript 1.3.6.1.4.1.321.100.1.8.2.1.4 displaystring read-write
Script interpreted when a dial-up connection is initiated.
                 ipadModemDataAnswerScript 1.3.6.1.4.1.321.100.1.8.2.1.5 displaystring read-write
Script interpreted when a modem port decides to answer an incoming call.
                 ipadModemDataHangupScript 1.3.6.1.4.1.321.100.1.8.2.1.6 displaystring read-write
Script interpreted when a dial-up connection is no longer needed.
                 ipadModemDataSyncScript 1.3.6.1.4.1.321.100.1.8.2.1.7 displaystring read-write
Script interpreted to configure the modem to pass synchronous data.
                 ipadModemDataSyncMethod 1.3.6.1.4.1.321.100.1.8.2.1.8 integer read-write
This object specifies how synchronous user data is passed to the modem. none - The modem does not support synchronous user data. sync - The modem directly supports synchronous user data. v80 - Synchronous user data is exchanged using ITU-T V.80 procedures without CRC. v80crc - Synchronous user data is exchanged using ITU-T V.80 procedures with CRC. rfc1662 - Synchronous user data is exchanged using the method described by RFC1662. Enumeration: 'rfc1662': 5, 'none': 2, 'sync': 3, 'v80crc': 6, 'other': 1, 'v80': 4.
                 ipadModemDataSetupScript2 1.3.6.1.4.1.321.100.1.8.2.1.9 displaystring read-write
Second script interpreted when a modem port is initialized.
                 ipadModemDataSetupScript3 1.3.6.1.4.1.321.100.1.8.2.1.10 displaystring read-write
Third script interpreted when a modem port is initialized.
                 ipadModemDataSetupScript4 1.3.6.1.4.1.321.100.1.8.2.1.11 displaystring read-write
Fourth script interpreted when a modem port is initialized.
                 ipadModemDataSetupScript5 1.3.6.1.4.1.321.100.1.8.2.1.12 displaystring read-write
Fifth script interpreted when a modem port is initialized.
         ipadDbuTable 1.3.6.1.4.1.321.100.1.8.3 no-access
The Dial Backup configuration table.
             ipadDbuTableEntry 1.3.6.1.4.1.321.100.1.8.3.1 no-access
An entry in the Dial Backup configuration table.
                 ipadDbuIndex 1.3.6.1.4.1.321.100.1.8.3.1.1 integer read-only
An index into the Dial Backup configuration table. Equivalent to MIB-II ifIndex.
                 ipadDbuOperation 1.3.6.1.4.1.321.100.1.8.3.1.2 integer read-write
This object specifes the basic operation of the Dial Backup feature. disable - Dial Backup is not to operate automatic - Dial Backup will start and end automatically automaticDaily - Dial Backup will operate automatically within the specified times in the Daily Dial Backup Table forceBackup - The unit will operate in backup mode unconditionally testOriginate - The unit will start backup procedures and hold the dial-up connection testAnswer - The unit will await a call, establish, and hold the dial-up connection Enumeration: 'automaticDaily': 4, 'testOriginate': 6, 'disable': 2, 'forceBackup': 5, 'other': 1, 'testAnswer': 7, 'automatic': 3.
                 ipadDbuMonitoredifIndex 1.3.6.1.4.1.321.100.1.8.3.1.7 integer read-write
Network MIB-II ifIndex monitored by Dial Backup.
                 ipadDbuActivator1 1.3.6.1.4.1.321.100.1.8.3.1.8 integer read-write
This object specifies what will trigger a dial backup activation. disable - No alarm will trigger any - Trigger on any active alarm listed here carrier - Trigger on LOS, OOF, or OOS alarms es - Trigger on the Errored Seconds alarm ses - Trigger on the Severely Errored Seconds alarm uas - Trigger on the Unavailable Seconds alarm los - Trigger on the Loss Of Signal alarm cs - Trigger on the Controlled Slip alarm bpv - Trigger on the Bipolar Violation alarm oof - Trigger on the Out Of Frame alarm ais - Trigger on the Alarm Indication Signal alarm ras - Trigger on the Remote Alarm Signal alarm oos - Trigger on the Out Of Service alarm Enumeration: 'oof': 11, 'ses': 6, 'uas': 7, 'bpv': 10, 'disable': 2, 'los': 8, 'other': 1, 'ais': 12, 'oos': 14, 'carrier': 4, 'cs': 9, 'any': 3, 'es': 5, 'ras': 13.
                 ipadDbuActivator2 1.3.6.1.4.1.321.100.1.8.3.1.9 integer read-write
This object specifies what will trigger a dial backup activation. disable - No alarm will trigger any - Trigger on any active alarm listed here carrier - Trigger on LOS, OOF, or OOS alarms es - Trigger on the Errored Seconds alarm ses - Trigger on the Severely Errored Seconds alarm uas - Trigger on the Unavailable Seconds alarm los - Trigger on the Loss Of Signal alarm cs - Trigger on the Controlled Slip alarm bpv - Trigger on the Bipolar Violation alarm oof - Trigger on the Out Of Frame alarm ais - Trigger on the Alarm Indication Signal alarm ras - Trigger on the Remote Alarm Signal alarm oos - Trigger on the Out Of Service alarm Enumeration: 'oof': 11, 'ses': 6, 'uas': 7, 'bpv': 10, 'disable': 2, 'los': 8, 'other': 1, 'ais': 12, 'oos': 14, 'carrier': 4, 'cs': 9, 'any': 3, 'es': 5, 'ras': 13.
                 ipadDbuRevertDelay 1.3.6.1.4.1.321.100.1.8.3.1.10 integer read-write
This object specifies the number of seconds the dial backup activators must be continuously gone before the normal connection is restored.
                 ipadDbuTrapDelay 1.3.6.1.4.1.321.100.1.8.3.1.11 integer read-write
This object specifies the number of seconds after entering the active state before sending the Dial Backup trap.
                 ipadDbuStatus 1.3.6.1.4.1.321.100.1.8.3.1.12 integer read-only
This object reports the current activity of the Dial Backup feature disabled - The feature is not enabled setup - The feature is configuring the modem error - The feature could not setup the modem standby - The feature is ready to operate disallowed - The Dial Backup Daily table prevents activation dialing - The feature is placing a call dialWait - The feature is between call attempts ringing - The feature is waiting for an incoming call to connect or go away answering - The feature is answering a call negotiating - The feature is negotiating the login security awaitingCallback - The feature is waiting for a security callback active - The feature backup path is connected disconnecting - The feature is disconnecting a call testWaiting - The feature is waiting for a link test call testPassed - The feature has successfully tested the backup link testFailed - The feature could not establish the backup link Enumeration: 'testWaiting': 11, 'awaitingCallback': 8, 'ringing': 17, 'standby': 3, 'setup': 15, 'answering': 6, 'negotiating': 7, 'disabled': 2, 'other': 1, 'dialWait': 16, 'testPassed': 12, 'error': 14, 'active': 9, 'testFailed': 13, 'dialing': 5, 'disallowed': 4, 'disconnecting': 10.
                 ipadDbuTrap 1.3.6.1.4.1.321.100.1.8.3.1.13 integer read-write
Enable or disable the Dial Backup trap. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
         ipadDbuDailyTable 1.3.6.1.4.1.321.100.1.8.4 no-access
The Daily Dial Backup Times Table.
             ipadDbuDailyTableEntry 1.3.6.1.4.1.321.100.1.8.4.1 no-access
An entry in the Daily Dial Backup Times Table.
                 ipadDbuDailyIndex 1.3.6.1.4.1.321.100.1.8.4.1.1 integer read-only
An index into the Daily Dial Backup Times Table. Equivalent to MIB-II ifIndex.
                 ipadDbuDailyDayOfWeek 1.3.6.1.4.1.321.100.1.8.4.1.2 integer read-only
This is the day of the week index into the Daily Dial Backup Times Table. Enumeration: 'monday': 2, 'tuesday': 3, 'friday': 6, 'wednesday': 4, 'thursday': 5, 'sunday': 1, 'saturday': 7.
                 ipadDbuDailyStart 1.3.6.1.4.1.321.100.1.8.4.1.3 integer read-write
This object is the beginning of a window for Dial Backup activation. Enumeration: 'hour22': 23, 'hour23': 24, 'hour20': 21, 'hour21': 22, 'hour13': 14, 'hour12': 13, 'hour11': 12, 'hour10': 11, 'hour17': 18, 'hour16': 17, 'hour15': 16, 'hour14': 15, 'hour19': 20, 'hour18': 19, 'hour04': 5, 'hour05': 6, 'hour06': 7, 'hour07': 8, 'hour00': 1, 'hour01': 2, 'hour02': 3, 'hour03': 4, 'hour08': 9, 'hour09': 10.
                 ipadDbuDailyLength 1.3.6.1.4.1.321.100.1.8.4.1.4 integer read-write
This object is the size of a window for Dial Backup activation. Enumeration: 'hour22': 23, 'hour23': 24, 'hour20': 21, 'hour21': 22, 'hour24': 25, 'hour13': 14, 'hour12': 13, 'hour11': 12, 'hour10': 11, 'hour17': 18, 'hour16': 17, 'hour15': 16, 'hour14': 15, 'hour19': 20, 'hour18': 19, 'disable': 1, 'hour04': 5, 'hour05': 6, 'hour06': 7, 'hour07': 8, 'hour01': 2, 'hour02': 3, 'hour03': 4, 'hour08': 9, 'hour09': 10.
     ipadSvcAware 1.3.6.1.4.1.321.100.1.9
         ipadFrPortStatsTable 1.3.6.1.4.1.321.100.1.9.1 no-access
Port statistics.
             ipadFrPortStatsEntry 1.3.6.1.4.1.321.100.1.9.1.1 no-access
An entry in the service aware ports statistics table.
                 ipadFrPortStatsService 1.3.6.1.4.1.321.100.1.9.1.1.1 integer read-only
Port index in the ipadFrPortStats table; an entry in the ipad service table.
                 ipadFrPortStatsPeriod 1.3.6.1.4.1.321.100.1.9.1.1.2 integer read-only
The index into the port stats 24-hour table. Enumeration: 'portStatsperiod68': 70, 'portStatsperiod69': 71, 'portStatsperiod62': 64, 'portStatsperiod63': 65, 'portStatsperiod60': 62, 'portStatsperiod61': 63, 'portStatsperiod66': 68, 'portStatsperiod67': 69, 'portStatsperiod64': 66, 'portStatsperiod65': 67, 'portStatsCurrent': 2, 'portStatsperiod59': 61, 'portStatsperiod58': 60, 'portStatsperiod57': 59, 'portStatsperiod56': 58, 'portStatsperiod55': 57, 'portStatsperiod54': 56, 'portStatsperiod53': 55, 'portStatsperiod52': 54, 'portStatsperiod51': 53, 'portStatsperiod50': 52, 'portStatsperiod9': 11, 'portStatsperiod8': 10, 'portStatsperiod7': 9, 'portStatsperiod6': 8, 'portStatsperiod5': 7, 'portStatsperiod4': 6, 'portStatsperiod3': 5, 'portStatsperiod2': 4, 'portStatsperiod1': 3, 'portStatsperiod40': 42, 'portStatsperiod41': 43, 'portStatsperiod42': 44, 'portStatsperiod43': 45, 'portStatsperiod44': 46, 'portStatsperiod45': 47, 'portStatsperiod46': 48, 'portStatsperiod47': 49, 'portStatsperiod48': 50, 'portStatsperiod49': 51, 'portStatsperiod35': 37, 'portStatsperiod34': 36, 'portStatsperiod37': 39, 'portStatsperiod36': 38, 'portStatsperiod31': 33, 'portStatsperiod30': 32, 'portStatsperiod33': 35, 'portStatsperiod32': 34, 'portStatsperiod39': 41, 'portStatsperiod38': 40, 'portStatsperiod26': 28, 'portStatsperiod27': 29, 'portStatsperiod24': 26, 'portStatsperiod25': 27, 'portStatsperiod22': 24, 'portStatsperiod23': 25, 'portStatsperiod20': 22, 'portStatsperiod21': 23, 'portStatsperiod28': 30, 'portStatsperiod29': 31, 'portStatsSummary': 1, 'portStatsperiod93': 95, 'portStatsperiod92': 94, 'portStatsperiod91': 93, 'portStatsperiod90': 92, 'portStatsperiod96': 98, 'portStatsperiod95': 97, 'portStatsperiod94': 96, 'portStatsperiod19': 21, 'portStatsperiod18': 20, 'portStatsperiod13': 15, 'portStatsperiod12': 14, 'portStatsperiod11': 13, 'portStatsperiod10': 12, 'portStatsperiod17': 19, 'portStatsperiod16': 18, 'portStatsperiod15': 17, 'portStatsperiod14': 16, 'portStatsperiod84': 86, 'portStatsperiod85': 87, 'portStatsperiod86': 88, 'portStatsperiod87': 89, 'portStatsperiod80': 82, 'portStatsperiod81': 83, 'portStatsperiod82': 84, 'portStatsperiod83': 85, 'portStatsperiod88': 90, 'portStatsperiod89': 91, 'portStatsperiod79': 81, 'portStatsperiod78': 80, 'portStatsperiod71': 73, 'portStatsperiod70': 72, 'portStatsperiod73': 75, 'portStatsperiod72': 74, 'portStatsperiod75': 77, 'portStatsperiod74': 76, 'portStatsperiod77': 79, 'portStatsperiod76': 78.
                 ipadFrPortStatsTxFrames 1.3.6.1.4.1.321.100.1.9.1.1.3 integer read-only
Number of transmitted frames for the period.
                 ipadFrPortStatsRxFrames 1.3.6.1.4.1.321.100.1.9.1.1.4 integer read-only
Number of received frames for the period.
                 ipadFrPortStatsTxOctets 1.3.6.1.4.1.321.100.1.9.1.1.5 integer read-only
Number of transmitted octets for the period.
                 ipadFrPortStatsRxOctets 1.3.6.1.4.1.321.100.1.9.1.1.6 integer read-only
Number of received octets for the period.
                 ipadFrPortStatsTxMgmtFrames 1.3.6.1.4.1.321.100.1.9.1.1.7 integer read-only
Number of transmitted management frames for the period.
                 ipadFrPortStatsRxMgmtFrames 1.3.6.1.4.1.321.100.1.9.1.1.8 integer read-only
Number of received management frames for the period.
                 ipadFrPortStatsTxMgmtOctets 1.3.6.1.4.1.321.100.1.9.1.1.9 integer read-only
Number of transmitted management octets for the period.
                 ipadFrPortStatsRxMgmtOctets 1.3.6.1.4.1.321.100.1.9.1.1.10 integer read-only
Number of received management octets for the period.
                 ipadFrPortStatsRxFECN 1.3.6.1.4.1.321.100.1.9.1.1.11 integer read-only
Number of received frames with FECN set for the period.
                 ipadFrPortStatsRxBECN 1.3.6.1.4.1.321.100.1.9.1.1.12 integer read-only
Number of received frames with BECN set for the period.
                 ipadFrPortStatsRxInvalid 1.3.6.1.4.1.321.100.1.9.1.1.13 integer read-only
Number of invalid received frames for the period.
                 ipadFrPortStatsTxStatInq 1.3.6.1.4.1.321.100.1.9.1.1.14 integer read-only
Number of transmitted status inquiry frames for the period.
                 ipadFrPortStatsRxStatInq 1.3.6.1.4.1.321.100.1.9.1.1.15 integer read-only
Number of received status inquiry frames for the period.
                 ipadFrPortStatsTxStatResp 1.3.6.1.4.1.321.100.1.9.1.1.16 integer read-only
Number of transmitted status response frames for the period.
                 ipadFrPortStatsRxStatResp 1.3.6.1.4.1.321.100.1.9.1.1.17 integer read-only
Number of received status response frames for the period.
                 ipadFrPortStatsRxInvLMI 1.3.6.1.4.1.321.100.1.9.1.1.18 integer read-only
Number of received frames with an invalid LMI for the period.
                 ipadFrPortStatsPeak 1.3.6.1.4.1.321.100.1.9.1.1.19 integer read-only
Peak throughput rate for the period (in bits/second).
                 ipadFrPortStatsAverage 1.3.6.1.4.1.321.100.1.9.1.1.20 integer read-only
Average throughput rate for the period (in bits/second).
                 ipadFrPortStatsTimeStamp 1.3.6.1.4.1.321.100.1.9.1.1.21 timeticks read-only
The value of sysUpTime the last time the statistics were updated.
                 ipadFrPortStatsTxAvgPercent 1.3.6.1.4.1.321.100.1.9.1.1.22 integer read-only
Average Tx throughput percent for the period.
                 ipadFrPortStatsTxMaxPercent 1.3.6.1.4.1.321.100.1.9.1.1.23 integer read-only
Maximum Tx throughput percent for the period.
                 ipadFrPortStatsTxInstantPercent 1.3.6.1.4.1.321.100.1.9.1.1.24 integer read-only
Instantaneous Tx throughput percent for the period.
                 ipadFrPortStatsTx20PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.25 integer read-only
Number of seconds Tx throughput was 0-20% of bandwidth.
                 ipadFrPortStatsTx40PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.26 integer read-only
Number of seconds Tx throughput was 21-40% of bandwidth.
                 ipadFrPortStatsTx60PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.27 integer read-only
Number of seconds Tx throughput was 41-60% of bandwidth.
                 ipadFrPortStatsTx80PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.28 integer read-only
Number of seconds Tx throughput was 61-80% of bandwidth.
                 ipadFrPortStatsTx100PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.29 integer read-only
Number of seconds Tx throughput was 81-100% of bandwidth.
                 ipadFrPortStatsRxAvgPercent 1.3.6.1.4.1.321.100.1.9.1.1.30 integer read-only
Average Rx throughput percent for the period.
                 ipadFrPortStatsRxMaxPercent 1.3.6.1.4.1.321.100.1.9.1.1.31 integer read-only
Maximum Rx throughput percent for the period.
                 ipadFrPortStatsRxInstantPercent 1.3.6.1.4.1.321.100.1.9.1.1.32 integer read-only
Instantaneous Rx throughput percent for the period.
                 ipadFrPortStatsRx20PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.33 integer read-only
Number of seconds Rx throughput was 0-20% of bandwidth.
                 ipadFrPortStatsRx40PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.34 integer read-only
Number of seconds Rx throughput was 21-40% of bandwidth.
                 ipadFrPortStatsRx60PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.35 integer read-only
Number of seconds Rx throughput was 41-60% of bandwidth.
                 ipadFrPortStatsRx80PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.36 integer read-only
Number of seconds Rx throughput was 61-80% of bandwidth.
                 ipadFrPortStatsRx100PercentSec 1.3.6.1.4.1.321.100.1.9.1.1.37 integer read-only
Number of seconds Rx throughput was 81-100% of bandwidth.
                 ipadFrPortStatsValidIntervals 1.3.6.1.4.1.321.100.1.9.1.1.38 integer read-only
Number of valid intervals in the table excluding the Summary and Current entries.
         ipadDLCIstatsTable 1.3.6.1.4.1.321.100.1.9.2 no-access
Port statistics.
             ipadDLCIstatsEntry 1.3.6.1.4.1.321.100.1.9.2.1 no-access
An entry in the service aware DLCI statistics table.
                 ipadDLCIstatsService 1.3.6.1.4.1.321.100.1.9.2.1.1 integer read-only
The service index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsDLCI.
                 ipadDLCIstatsDLCI 1.3.6.1.4.1.321.100.1.9.2.1.2 integer read-only
The DLCI index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsService.
                 ipadDLCIstatsPeriod 1.3.6.1.4.1.321.100.1.9.2.1.3 integer read-only
The index into the DLCI stats 24-hour table. Enumeration: 'dlciStatsperiod76': 78, 'dlciStatsperiod77': 79, 'dlciStatsperiod74': 76, 'dlciStatsperiod75': 77, 'dlciStatsperiod72': 74, 'dlciStatsperiod73': 75, 'dlciStatsperiod70': 72, 'dlciStatsperiod71': 73, 'dlciStatsperiod78': 80, 'dlciStatsperiod79': 81, 'dlciStatsCurrent': 2, 'dlciStatsperiod49': 51, 'dlciStatsperiod48': 50, 'dlciStatsperiod43': 45, 'dlciStatsperiod42': 44, 'dlciStatsperiod41': 43, 'dlciStatsperiod40': 42, 'dlciStatsperiod47': 49, 'dlciStatsperiod46': 48, 'dlciStatsperiod45': 47, 'dlciStatsperiod44': 46, 'dlciStatsperiod8': 10, 'dlciStatsperiod9': 11, 'dlciStatsperiod2': 4, 'dlciStatsperiod3': 5, 'dlciStatsperiod1': 3, 'dlciStatsperiod6': 8, 'dlciStatsperiod7': 9, 'dlciStatsperiod4': 6, 'dlciStatsperiod5': 7, 'dlciStatsperiod58': 60, 'dlciStatsperiod59': 61, 'dlciStatsperiod54': 56, 'dlciStatsperiod55': 57, 'dlciStatsperiod56': 58, 'dlciStatsperiod57': 59, 'dlciStatsperiod50': 52, 'dlciStatsperiod51': 53, 'dlciStatsperiod52': 54, 'dlciStatsperiod53': 55, 'dlciStatsperiod29': 31, 'dlciStatsperiod28': 30, 'dlciStatsperiod21': 23, 'dlciStatsperiod20': 22, 'dlciStatsperiod23': 25, 'dlciStatsperiod22': 24, 'dlciStatsperiod25': 27, 'dlciStatsperiod24': 26, 'dlciStatsperiod27': 29, 'dlciStatsperiod26': 28, 'dlciStatsperiod38': 40, 'dlciStatsperiod39': 41, 'dlciStatsperiod32': 34, 'dlciStatsperiod33': 35, 'dlciStatsperiod30': 32, 'dlciStatsperiod31': 33, 'dlciStatsperiod36': 38, 'dlciStatsperiod37': 39, 'dlciStatsperiod34': 36, 'dlciStatsperiod35': 37, 'dlciStatsperiod87': 89, 'dlciStatsperiod86': 88, 'dlciStatsperiod85': 87, 'dlciStatsperiod84': 86, 'dlciStatsperiod83': 85, 'dlciStatsperiod82': 84, 'dlciStatsperiod81': 83, 'dlciStatsperiod80': 82, 'dlciStatsperiod89': 91, 'dlciStatsperiod88': 90, 'dlciStatsperiod10': 12, 'dlciStatsperiod11': 13, 'dlciStatsperiod12': 14, 'dlciStatsperiod13': 15, 'dlciStatsperiod14': 16, 'dlciStatsperiod15': 17, 'dlciStatsperiod16': 18, 'dlciStatsperiod17': 19, 'dlciStatsperiod18': 20, 'dlciStatsperiod19': 21, 'dlciStatsperiod90': 92, 'dlciStatsperiod91': 93, 'dlciStatsperiod92': 94, 'dlciStatsperiod93': 95, 'dlciStatsperiod94': 96, 'dlciStatsperiod95': 97, 'dlciStatsperiod96': 98, 'dlciStatsSummary': 1, 'dlciStatsperiod65': 67, 'dlciStatsperiod64': 66, 'dlciStatsperiod67': 69, 'dlciStatsperiod66': 68, 'dlciStatsperiod61': 63, 'dlciStatsperiod60': 62, 'dlciStatsperiod63': 65, 'dlciStatsperiod62': 64, 'dlciStatsperiod69': 71, 'dlciStatsperiod68': 70.
                 ipadDLCIstatsTxFrames 1.3.6.1.4.1.321.100.1.9.2.1.4 integer read-only
The number of transmitted frames for the period.
                 ipadDLCIstatsRxFrames 1.3.6.1.4.1.321.100.1.9.2.1.5 integer read-only
The number of received frames for the period.
                 ipadDLCIstatsTxOctets 1.3.6.1.4.1.321.100.1.9.2.1.6 integer read-only
The number of transmitted octets for the period.
                 ipadDLCIstatsRxOctets 1.3.6.1.4.1.321.100.1.9.2.1.7 integer read-only
The number of received octets for the period.
                 ipadDLCIstatsRxFECN 1.3.6.1.4.1.321.100.1.9.2.1.8 integer read-only
The number of received frames with FECN set for the period.
                 ipadDLCIstatsRxBECN 1.3.6.1.4.1.321.100.1.9.2.1.9 integer read-only
The number of received frames with BECN set for the period.
                 ipadDLCIstatsRxDE 1.3.6.1.4.1.321.100.1.9.2.1.10 integer read-only
The number of received frames with DE bit set for the period.
                 ipadDLCIstatsTxExcessCIR 1.3.6.1.4.1.321.100.1.9.2.1.11 integer read-only
The number of transmitted octets in excess of CIR for the period.
                 ipadDLCIstatsTxExcessBe 1.3.6.1.4.1.321.100.1.9.2.1.12 integer read-only
The number of transmitted octets in excess of Be for the period.
                 ipadDLCIstatsTxMgmtFrames 1.3.6.1.4.1.321.100.1.9.2.1.13 integer read-only
The number of transmitted management frames for the period.
                 ipadDLCIstatsRxMgmtFrames 1.3.6.1.4.1.321.100.1.9.2.1.14 integer read-only
The number of received management frames for the period.
                 ipadDLCIstatsTxMgmtOctets 1.3.6.1.4.1.321.100.1.9.2.1.15 integer read-only
The number of transmitted management octets for the period.
                 ipadDLCIstatsRxMgmtOctets 1.3.6.1.4.1.321.100.1.9.2.1.16 integer read-only
The number of received management octets for the period.
                 ipadDLCIstatsPeak 1.3.6.1.4.1.321.100.1.9.2.1.17 integer read-only
Peak throughput rate for the period (in bits/second).
                 ipadDLCIstatsAverage 1.3.6.1.4.1.321.100.1.9.2.1.18 integer read-only
Average throughput rate for the period (in bits/second).
                 ipadDLCIstatsDelayPeak 1.3.6.1.4.1.321.100.1.9.2.1.19 integer read-only
Peak roundtrip delay for the period.
                 ipadDLCIstatsDelayAverage 1.3.6.1.4.1.321.100.1.9.2.1.20 integer read-only
Average roundtrip delay for the period.
                 ipadDLCIstatsRoundTripTimeouts 1.3.6.1.4.1.321.100.1.9.2.1.21 integer read-only
Number of timeouts on roundtrip delay for the period.
                 ipadDLCIstatsUAS 1.3.6.1.4.1.321.100.1.9.2.1.22 integer read-only
Number of seconds the DLCI is unavailable.
                 ipadDLCIstatsFdrCir 1.3.6.1.4.1.321.100.1.9.2.1.23 integer read-only
                 ipadDLCIstatsDdrCir 1.3.6.1.4.1.321.100.1.9.2.1.24 integer read-only
                 ipadDLCIstatsFdrBe 1.3.6.1.4.1.321.100.1.9.2.1.25 integer read-only
                 ipadDLCIstatsDdrBe 1.3.6.1.4.1.321.100.1.9.2.1.26 integer read-only
                 ipadDLCIstatsTimeStamp 1.3.6.1.4.1.321.100.1.9.2.1.27 timeticks read-only
The value of sysUpTime the last time the statistics were updated.
                 ipadDLCIstatsRemoteFramesOfferedWithinCIR 1.3.6.1.4.1.321.100.1.9.2.1.28 integer read-only
Count of frames sent within CIR from the remote end of the DLCI.
                 ipadDLCIstatsRemoteFramesOfferedWithinBE 1.3.6.1.4.1.321.100.1.9.2.1.29 integer read-only
Count of frames sent within BE, but over CIR, from the remote end of the DLCI.
                 ipadDLCIstatsFramesReceived 1.3.6.1.4.1.321.100.1.9.2.1.30 integer read-only
Count of frames received by the local device on this DLCI.
                 ipadDLCIstatsFDRCIR 1.3.6.1.4.1.321.100.1.9.2.1.31 displaystring read-only
Frame Delivery Ratio calculated within CIR.
                 ipadDLCIstatsFDRBE 1.3.6.1.4.1.321.100.1.9.2.1.32 displaystring read-only
Frame Delivery Ratio caclulated within BE.
                 ipadDLCIstatsRemoteDataOfferedWithinCIR 1.3.6.1.4.1.321.100.1.9.2.1.33 integer read-only
Count of data octets sent within CIR from the remote end of the DLCI.
                 ipadDLCIstatsRemoteDataOfferedWithinBE 1.3.6.1.4.1.321.100.1.9.2.1.34 integer read-only
Count of data octets sent within BE, but over CIR, from the remote end of the DLCI.
                 ipadDLCIstatsDataReceived 1.3.6.1.4.1.321.100.1.9.2.1.35 integer read-only
Count of data octets received by the local device on this DLCI.
                 ipadDLCIstatsDDRCIR 1.3.6.1.4.1.321.100.1.9.2.1.36 displaystring read-only
Data Delivery Ratio calculated within CIR.
                 ipadDLCIstatsDDRBE 1.3.6.1.4.1.321.100.1.9.2.1.37 displaystring read-only
Data Delivery Ratio caclulated within BE.
                 ipadDLCIstatsAvgPercent 1.3.6.1.4.1.321.100.1.9.2.1.38 integer read-only
Average throughput percent for the period.
                 ipadDLCIstatsMaxPercent 1.3.6.1.4.1.321.100.1.9.2.1.39 integer read-only
Maximum throughput percent for the period.
                 ipadDLCIstatsInstantPercent 1.3.6.1.4.1.321.100.1.9.2.1.40 integer read-only
Instantaneous throughput percent for the period.
                 ipadDLCIstats20PercentSec 1.3.6.1.4.1.321.100.1.9.2.1.41 integer read-only
Number of seconds throughput was 0-20% of bandwidth.
                 ipadDLCIstats40PercentSec 1.3.6.1.4.1.321.100.1.9.2.1.42 integer read-only
Number of seconds throughput was 21-40% of bandwidth.
                 ipadDLCIstats60PercentSec 1.3.6.1.4.1.321.100.1.9.2.1.43 integer read-only
Number of seconds throughput was 41-60% of bandwidth.
                 ipadDLCIstats80PercentSec 1.3.6.1.4.1.321.100.1.9.2.1.44 integer read-only
Number of seconds throughput was 61-80% of bandwidth.
                 ipadDLCIstats100PercentSec 1.3.6.1.4.1.321.100.1.9.2.1.45 integer read-only
Number of seconds throughput was 81-100% of bandwidth.
                 ipadDLCIstatsValidIntervals 1.3.6.1.4.1.321.100.1.9.2.1.46 integer read-only
Number of valid intervals in the table excluding the Summary and Current entries.
                 ipadDLCIstatsCompressionTxOctetsIn 1.3.6.1.4.1.321.100.1.9.2.1.47 integer read-only
Number of octets passed into the compression engine.
                 ipadDLCIstatsCompressionTxOctetsOut 1.3.6.1.4.1.321.100.1.9.2.1.48 integer read-only
Number of octets passed out of the compression engine.
                 ipadDLCIstatsCompressionRxOctetsIn 1.3.6.1.4.1.321.100.1.9.2.1.49 integer read-only
Number of octets passed into the compression engine.
                 ipadDLCIstatsCompressionRxOctetsOut 1.3.6.1.4.1.321.100.1.9.2.1.50 integer read-only
Number of octets passed out of the compression engine.
                 ipadDLCIstatsCompressionTxRatio 1.3.6.1.4.1.321.100.1.9.2.1.51 displaystring read-only
Compression Ratio calculated in the transmit direction.
                 ipadDLCIstatsCompressionRxRatio 1.3.6.1.4.1.321.100.1.9.2.1.52 displaystring read-only
Compression Ratio calculation in the receive direction.
         ipadUserStatsTable 1.3.6.1.4.1.321.100.1.9.3 no-access
User-selected protocol statistics.
             ipadUserStatsEntry 1.3.6.1.4.1.321.100.1.9.3.1 no-access
An entry in the user statistics table.
                 ipadUserStatsIndex 1.3.6.1.4.1.321.100.1.9.3.1.1 integer read-only
Index into the user statistics table.
                 ipadUserStatsPeriod 1.3.6.1.4.1.321.100.1.9.3.1.2 integer read-only
The index into the user stats 24-hour table. Enumeration: 'userStatsperiod88': 90, 'userStatsperiod89': 91, 'userStatsperiod84': 86, 'userStatsperiod85': 87, 'userStatsperiod86': 88, 'userStatsperiod87': 89, 'userStatsperiod80': 82, 'userStatsperiod81': 83, 'userStatsperiod82': 84, 'userStatsperiod83': 85, 'userStatsperiod71': 73, 'userStatsperiod70': 72, 'userStatsperiod73': 75, 'userStatsperiod72': 74, 'userStatsperiod75': 77, 'userStatsperiod74': 76, 'userStatsperiod77': 79, 'userStatsperiod76': 78, 'userStatsperiod79': 81, 'userStatsperiod78': 80, 'userStatsperiod8': 10, 'userStatsperiod62': 64, 'userStatsperiod63': 65, 'userStatsperiod60': 62, 'userStatsperiod61': 63, 'userStatsperiod66': 68, 'userStatsperiod67': 69, 'userStatsperiod64': 66, 'userStatsperiod65': 67, 'userStatsperiod68': 70, 'userStatsperiod69': 71, 'userStatsperiod57': 59, 'userStatsperiod56': 58, 'userStatsperiod55': 57, 'userStatsperiod54': 56, 'userStatsperiod53': 55, 'userStatsperiod52': 54, 'userStatsperiod51': 53, 'userStatsperiod50': 52, 'userStatsperiod59': 61, 'userStatsperiod58': 60, 'userStatsSummary': 1, 'userStatsperiod48': 50, 'userStatsperiod49': 51, 'userStatsperiod40': 42, 'userStatsperiod41': 43, 'userStatsperiod42': 44, 'userStatsperiod43': 45, 'userStatsperiod44': 46, 'userStatsperiod45': 47, 'userStatsperiod46': 48, 'userStatsperiod47': 49, 'userStatsperiod7': 9, 'userStatsperiod6': 8, 'userStatsperiod5': 7, 'userStatsperiod4': 6, 'userStatsperiod3': 5, 'userStatsperiod2': 4, 'userStatsperiod1': 3, 'userStatsperiod9': 11, 'userStatsCurrent': 2, 'userStatsperiod39': 41, 'userStatsperiod38': 40, 'userStatsperiod35': 37, 'userStatsperiod34': 36, 'userStatsperiod37': 39, 'userStatsperiod36': 38, 'userStatsperiod31': 33, 'userStatsperiod30': 32, 'userStatsperiod33': 35, 'userStatsperiod32': 34, 'userStatsperiod28': 30, 'userStatsperiod29': 31, 'userStatsperiod26': 28, 'userStatsperiod27': 29, 'userStatsperiod24': 26, 'userStatsperiod25': 27, 'userStatsperiod22': 24, 'userStatsperiod23': 25, 'userStatsperiod20': 22, 'userStatsperiod21': 23, 'userStatsperiod13': 15, 'userStatsperiod12': 14, 'userStatsperiod11': 13, 'userStatsperiod10': 12, 'userStatsperiod17': 19, 'userStatsperiod16': 18, 'userStatsperiod15': 17, 'userStatsperiod14': 16, 'userStatsperiod19': 21, 'userStatsperiod18': 20, 'userStatsperiod93': 95, 'userStatsperiod92': 94, 'userStatsperiod91': 93, 'userStatsperiod90': 92, 'userStatsperiod96': 98, 'userStatsperiod95': 97, 'userStatsperiod94': 96.
                 ipadUserStatsTxFrames 1.3.6.1.4.1.321.100.1.9.3.1.3 integer read-only
Number of transmitted frames for the period.
                 ipadUserStatsRxFrames 1.3.6.1.4.1.321.100.1.9.3.1.4 integer read-only
Number of received frames for the period.
                 ipadUserStatsTxOctets 1.3.6.1.4.1.321.100.1.9.3.1.5 integer read-only
Number of transmitted octets for the period.
                 ipadUserStatsRxOctets 1.3.6.1.4.1.321.100.1.9.3.1.6 integer read-only
Number of received octets for the period.
                 ipadUserStatsTxRatePeak 1.3.6.1.4.1.321.100.1.9.3.1.7 integer read-only
Peak throughput rate for the period (in bits/second).
                 ipadUserStatsTxRateAverage 1.3.6.1.4.1.321.100.1.9.3.1.8 integer read-only
Average throughput rate for the period (in bits/second).
                 ipadUserStatsTimeStamp 1.3.6.1.4.1.321.100.1.9.3.1.9 timeticks read-only
The value of sysUpTime the last time the statistics were updated.
         ipadIPTopNStatsTable 1.3.6.1.4.1.321.100.1.9.4 no-access
IP TopN statistics.
             ipadIPTopNStatsEntry 1.3.6.1.4.1.321.100.1.9.4.1 no-access
An entry in the user statistics table.
                 ipadIPTopNStatsIndex 1.3.6.1.4.1.321.100.1.9.4.1.1 integer read-only
Index into the IP TopN statistics table.
                 ipadIPTopNStatsAddress 1.3.6.1.4.1.321.100.1.9.4.1.2 octet string read-only
IP address of this entry.
                 ipadIPTopNStatsTimestamp 1.3.6.1.4.1.321.100.1.9.4.1.3 timeticks read-only
Time of last IP frame for this entry.
                 ipadIPTopNStatsRxFrames 1.3.6.1.4.1.321.100.1.9.4.1.4 integer read-only
Number of received IP frames for this entry.
                 ipadIPTopNStatsRxOctets 1.3.6.1.4.1.321.100.1.9.4.1.5 integer read-only
Number of received IP octets for this entry.
                 ipadIPTopNStatsTxFrames 1.3.6.1.4.1.321.100.1.9.4.1.6 integer read-only
Number of transmitted IP frames for this entry.
                 ipadIPTopNStatsTxOctets 1.3.6.1.4.1.321.100.1.9.4.1.7 integer read-only
Number of transmitted IP octets for this entry.
     ipadPktSwitch 1.3.6.1.4.1.321.100.1.10
           ipadPktSwOperatingMode 1.3.6.1.4.1.321.100.1.10.1 integer read-write
Selects overall mode of operation. Enumeration: 'profile20': 24, 'profile21': 25, 'packet': 4, 'profile9': 13, 'monitor': 3, 'profile5': 9, 'profile4': 8, 'profile7': 11, 'profile6': 10, 'profile3': 7, 'profile2': 6, 'other': 1, 'tdm': 2, 'profile15': 19, 'profile14': 18, 'profile17': 21, 'profile16': 20, 'profile11': 15, 'profile10': 14, 'profile13': 17, 'profile12': 16, 'profile19': 23, 'profile18': 22, 'profile8': 12, 'remoteConfig': 5.
           ipadPktSwCfgTable 1.3.6.1.4.1.321.100.1.10.2 no-access
The ipad packet switch configuration table.
               ipadPktSwCfgTableEntry 1.3.6.1.4.1.321.100.1.10.2.1 no-access
An entry in the ipad packet switch configuration table.
                   ipadPktSwCfgService 1.3.6.1.4.1.321.100.1.10.2.1.1 integer read-only
The index into the packet switch configuration table; an entry in the ipad Service table.
                   ipadPktSwCfgInterfaceType 1.3.6.1.4.1.321.100.1.10.2.1.2 integer read-write
Network ports should be set to User Network Interface (uni) and user ports should be set to Network Interface (ni). Enumeration: 'uni': 1, 'nni': 3, 'ni': 2.
                   ipadPktSwCfgLnkMgmtType 1.3.6.1.4.1.321.100.1.10.2.1.3 integer read-write
If set to auto, the frame relay LMI type will be learned from the network side. If set to none, all DLCI must be configured. Enumeration: 'ccitt': 3, 'ansi': 4, 'auto': 2, 'none': 6, 'lmi': 5, 'other': 1.
                   ipadPktSwCfgMaxFrameSize 1.3.6.1.4.1.321.100.1.10.2.1.4 integer read-write
This is the maximum frame size configured in the frame relay network.
                   ipadPktSwCfgnN1 1.3.6.1.4.1.321.100.1.10.2.1.5 integer read-write
Number of keep alive requests between full status request.
                   ipadPktSwCfgnN2 1.3.6.1.4.1.321.100.1.10.2.1.6 integer read-write
Number of errors from FRAD before alarm.
                   ipadPktSwCfgnN3 1.3.6.1.4.1.321.100.1.10.2.1.7 integer read-write
Number of events to sample nN2.
                   ipadPktSwCfgnT1 1.3.6.1.4.1.321.100.1.10.2.1.8 integer read-write
Delay before issuing a poll sequence.
                   ipadPktSwCfgDefCIR 1.3.6.1.4.1.321.100.1.10.2.1.9 integer read-write
Default committed information rate in bits per second.
                   ipadPktSwCfgDefExBurst 1.3.6.1.4.1.321.100.1.10.2.1.10 integer read-write
Default excess burst rate in bits per second.
                   ipadPktSwCfgCIREE 1.3.6.1.4.1.321.100.1.10.2.1.11 integer read-write
Determines if the interface will enforce CIR and excess burst configured values. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                   ipadPktSwCfgLinkInjection 1.3.6.1.4.1.321.100.1.10.2.1.12 integer read-write
Indicates how to process frames in excess of the CIR when congestion exists. Enumeration: 'buffered': 3, 'other': 1, 'forced': 4, 'standard': 2.
                   ipadPktSwCfgAutoDiagnostic 1.3.6.1.4.1.321.100.1.10.2.1.13 integer read-write
Determines if the unit will put itself into diagnostic mode everytime it determines that there are no LMI received on a network service. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                   ipadPktSwCfgAutoDiscovery 1.3.6.1.4.1.321.100.1.10.2.1.14 integer read-write
Determines if the unit will learn the DLCIs from the LMMI received on this service. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                   ipadPktSwCfgMgmtDLCI 1.3.6.1.4.1.321.100.1.10.2.1.15 integer read-write
Specifies the DLCI that will be used by the unit for management information. Specifying a 0 disables this feature.
                   ipadPktSwCfgRoundTripDelaySize 1.3.6.1.4.1.321.100.1.10.2.1.16 integer read-write
Specifies the packet size in octets used to calculate round trip delay.
                   ipadPktSwCfgRoundTripDelayRate 1.3.6.1.4.1.321.100.1.10.2.1.17 integer read-write
Specifies the packet rate in seconds used to calculate round trip delay.
                   ipadPktSwCfgAutoIPMgmtAddr 1.3.6.1.4.1.321.100.1.10.2.1.18 integer read-write
Look for DLCI (980-995) and uses its IP address. Enumeration: 'yes': 3, 'other': 1, 'no': 2.
                   ipadPktSwCfgNormalTxQueueSize 1.3.6.1.4.1.321.100.1.10.2.1.19 integer read-write
The depth of the normal priority tx queue. This size determines the max number of low priority packets that can be queued in front of high priority traffic.
                   ipadPktSwCfgAddDLCI 1.3.6.1.4.1.321.100.1.10.2.1.20 integer read-write
Identifies a DLCI number to be added.
                   ipadPktSwCfgDeleteDLCI 1.3.6.1.4.1.321.100.1.10.2.1.21 integer read-write
Identifies a DLCI number to be deleted.
     ipadTrapDest 1.3.6.1.4.1.321.100.1.11
           ipadTrapDestTable 1.3.6.1.4.1.321.100.1.11.1 no-access
The ipad trap destination table.
               ipadTrapDestTableEntry 1.3.6.1.4.1.321.100.1.11.1.1 no-access
An entry in the ipad trap destination table.
                   ipadTrapDestIndex 1.3.6.1.4.1.321.100.1.11.1.1.1 integer read-only
Index into the ipad trap destination table.
                   ipadTrapDestination 1.3.6.1.4.1.321.100.1.11.1.1.2 ipaddress read-write
Trap destination.
     ipadMisc 1.3.6.1.4.1.321.100.1.12
           ipadMiscPortSettings 1.3.6.1.4.1.321.100.1.12.1 no-access
The ipad miscellaneous port settings table.
               ipadMiscPortSettingsEntry 1.3.6.1.4.1.321.100.1.12.1.1 no-access
An entry in the ipad miscellaneous port settings table.
                   ipadMiscPortSettingsIndex 1.3.6.1.4.1.321.100.1.12.1.1.1 integer read-only
The MIB-II ifIndex for this port.
                   ipadMiscPortSettingsSerialType 1.3.6.1.4.1.321.100.1.12.1.1.2 integer read-write
The type of this serial port. Enumeration: 'other': 1, 'dte': 3, 'dce': 2.
                   ipadMiscPortSettingsModemControl 1.3.6.1.4.1.321.100.1.12.1.1.3 integer read-write
Request the attached service to use the modem dialing control feature. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           ipadMiscClearStatusCounts 1.3.6.1.4.1.321.100.1.12.2 integer read-write
Writing a 2 to this field will clear all status counts. Enumeration: 'other': 1, 'clearAll': 2.
           ipadMiscEnableServiceAware 1.3.6.1.4.1.321.100.1.12.3 integer read-write
Writing a 3 to this field will enable service aware statistics gathering. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           ipadMiscShdslConfigTable 1.3.6.1.4.1.321.100.1.12.4 no-access
The ipad miscellaneous SHDSL configuration table.
               ipadMiscShdslConfigEntry 1.3.6.1.4.1.321.100.1.12.4.1 no-access
An entry in the ipad miscellaneous SHDSL configuration table.
                   ipadMiscShdslConfigIndex 1.3.6.1.4.1.321.100.1.12.4.1.1 integer read-only
This object is the index into the SHDSL configuration table.
                   ipadMiscShdslTerminalType 1.3.6.1.4.1.321.100.1.12.4.1.2 integer read-write
Selects whether the tu is a central or remote site terminal unit. Applicable to HDSL2/SHDSL only. Enumeration: 'other': 1, 'isXtuC': 2, 'isXtuR': 3.
                   ipadMiscShdslTiming 1.3.6.1.4.1.321.100.1.12.4.1.3 integer read-write
Sets the timing source to synchronize the unit's internal timing generators. Enumeration: 'shdslTimingStation': 5, 'shdslTimingPort2': 7, 'shdslTimingPort1': 6, 'shdslTimingEqDTE': 4, 'shdslTimingNetwork': 3, 'shdslTimingInternal': 2, 'shdslTimingOther': 1.
                   ipadMiscShdslStationInTiming 1.3.6.1.4.1.321.100.1.12.4.1.4 integer read-write
Selects the input timing if SHDSLTiming is set to Station. Enumeration: 'shdslStationInTiming1544': 3, 'shdslStationInTimingOther': 1, 'shdslStationInTimingNX64': 2, 'shdslStationInTiming2048': 4.
                   ipadMiscShdslStationTimingNxMultiple 1.3.6.1.4.1.321.100.1.12.4.1.5 integer read-write
Selects the N-multiple when Station Input Timing is set to either NX56 or NX65.
                   ipadMiscShdslAutomaticRetrain 1.3.6.1.4.1.321.100.1.12.4.1.6 integer read-write
Enable or disable automatic line retraining when needed. Enable is the default. Disable is used for PSD measurement. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           ipadMiscShdslStatusTable 1.3.6.1.4.1.321.100.1.12.5 no-access
The ipad miscellaneous SHDSL status table.
               ipadMiscShdslStatusEntry 1.3.6.1.4.1.321.100.1.12.5.1 no-access
An entry in the ipad miscellaneous SHDSL status table.
                   ipadMiscShdslStatusIndex 1.3.6.1.4.1.321.100.1.12.5.1.1 integer read-only
This object is the index into the SHDSL configuration table.
                   ipadMiscShdslConnectionStatus 1.3.6.1.4.1.321.100.1.12.5.1.2 integer read-only
This object displays the connection status of Wire Pair 1 of an SHDSL connection. Enumeration: 'training': 3, 'idle': 1, 'data': 4, 'handshake': 2.
                   ipadMiscShdslDetailedConnectionStatus 1.3.6.1.4.1.321.100.1.12.5.1.3 displaystring read-only
This object displays the detailed connection status of Wire Pair 1 of an SHDSL connection.
                   ipadMiscShdslEOCInMessages 1.3.6.1.4.1.321.100.1.12.5.1.4 integer read-only
This object displays the number of EOC messages received.
                   ipadMiscShdslEOCOutMessages 1.3.6.1.4.1.321.100.1.12.5.1.5 integer read-only
This object displays the number of EOC messages transmitted.
                   ipadMiscShdslConnectionStatusPair2 1.3.6.1.4.1.321.100.1.12.5.1.6 integer read-only
This object displays the connection status of Wire Pair 2 of an SHDSL connection. Enumeration: 'training': 3, 'idle': 1, 'data': 4, 'handshake': 2.
                   ipadMiscShdslDetailedConnectionStatusPair2 1.3.6.1.4.1.321.100.1.12.5.1.7 displaystring read-only
This object displays the detailed connection status of Wire Pair 2 of an SHDSL connection.
           ipadMiscEnableSupervisoryPort 1.3.6.1.4.1.321.100.1.12.6 integer read-write
Writing a 2 to this field will disable VT100 and telnet. Writing a 3 to this field will enable VT100 and telnet. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           ipadMiscEnableButtons 1.3.6.1.4.1.321.100.1.12.7 integer read-write
Writing a 2 to this field will disable the buttons. Writing a 3 to this field will enable the buttons. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           ipadMiscBootupConsoleAvail 1.3.6.1.4.1.321.100.1.12.8 integer read-write
Writing a 2 to this field will disable the console port for diagnostic messages. Writing a 3 to this field will enable these messages. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           ipadMiscEnableLEDs 1.3.6.1.4.1.321.100.1.12.9 integer read-write
Writing a 2 to this field will disable the LEDs. Writing a 3 to this field will enable the LEDs. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           ipadMiscDisableLAN 1.3.6.1.4.1.321.100.1.12.10 integer read-write
This parameter defines the setup of the Ethernet LAN port. disable(2) - Disable the Ethernet LAN Port. enable(3) - Enable the Ethernet LAN port and auto-negotiate speed and duplex. half10(4) - Enable the Ethernet LAN port and manually set to 10 Mbps and half-duplex. full10(5) - Enable the Ethernet LAN port and manually set to 10 Mbps and full-duplex. half100(6) - Enable the Ethernet LAN port and manually set to 100 Mbps and half-duplex. full100(7) - Enable the Ethernet LAN port and manually set to 100 Mbps and full-duplex. Enumeration: 'enable': 3, 'disable': 2, 'full100': 7, 'half10': 4, 'half100': 6, 'other': 1, 'full10': 5.
           ipadMiscLANStatus 1.3.6.1.4.1.321.100.1.12.11 integer read-only
This parameter defines the setup of the Ethernet LAN port. down(1) - Port has not negotiated. half10(2) - Port negotiated 10 Mbps and half-duplex. full10(3) - Port negotiated 10 Mbps and full-duplex. half100(4) - Port negotiated 100 Mbps and half-duplex. full100(5) - Port negotiated 100 Mbps and full-duplex. na(6) - Not Applicable (speed/duplex manually set). Enumeration: 'full100': 5, 'na': 6, 'half10': 2, 'half100': 4, 'down': 1, 'full10': 3.
     ipadRouter 1.3.6.1.4.1.321.100.1.13
     ipadSoftKey 1.3.6.1.4.1.321.100.1.14
           ipadSoftKeyTable 1.3.6.1.4.1.321.100.1.14.1 no-access
Table of software keys.
               ipadSoftKeyTableEntry 1.3.6.1.4.1.321.100.1.14.1.1 no-access
An entry in the software key table.
                   ipadSoftKeyIndex 1.3.6.1.4.1.321.100.1.14.1.1.1 integer read-only
Index into the ipad software key table.
                   ipadSoftKeyAcronym 1.3.6.1.4.1.321.100.1.14.1.1.2 displaystring read-only
Three-letter acronym for software key.
                   ipadSoftKeyDescription 1.3.6.1.4.1.321.100.1.14.1.1.3 displaystring read-only
Description, if available, of this software key.
                   ipadSoftKeyExpirationDate 1.3.6.1.4.1.321.100.1.14.1.1.4 displaystring read-only
Expiration date of this software key in the format YY/MM/DD.
           ipadSoftKeyEntry 1.3.6.1.4.1.321.100.1.14.2 displaystring read-write
Writing a software key will enable that feature (assuming a correct and valid key is entered).
     ipadTCPServer 1.3.6.1.4.1.321.100.1.15
           ipadTCPServerEnable 1.3.6.1.4.1.321.100.1.15.1 integer read-write
Enables/disables the TCP Server. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           ipadTCPServerConnTable 1.3.6.1.4.1.321.100.1.15.2 no-access
Table of TCP Server connections.
               ipadTCPServerConnTableEntry 1.3.6.1.4.1.321.100.1.15.2.1 no-access
An entry in the TCP Server connection table.
                   ipadTCPServerConnIndex 1.3.6.1.4.1.321.100.1.15.2.1.1 integer read-only
Index into the ipad TCP Server Connection table.
                   ipadTCPServerConnEndpoint 1.3.6.1.4.1.321.100.1.15.2.1.2 displaystring read-write
Identifies the endpoint for this connection.
                   ipadTCPServerConnLocalPort 1.3.6.1.4.1.321.100.1.15.2.1.3 integer read-write
Identifies the TCP port for this connection (default: 2000).
                   ipadTCPServerConnEnableEntry 1.3.6.1.4.1.321.100.1.15.2.1.4 integer read-write
Enables or disables this entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           ipadTCPServerAddConnEntry 1.3.6.1.4.1.321.100.1.15.3 integer read-write
Writing addnew(2) to this field causes a new (blank) connection to be appended to the TCP Server Table. Enumeration: 'other': 1, 'addnew': 2.
           ipadTCPServerDeleteConnEntry 1.3.6.1.4.1.321.100.1.15.4 integer read-write
Identifies a connection table entry to be deleted.
           ipadTCPServerHostAccessTable 1.3.6.1.4.1.321.100.1.15.5 no-access
Table of TCP Server IP Host Access List.
               ipadTCPServerHostAccessTableEntry 1.3.6.1.4.1.321.100.1.15.5.1 no-access
An entry in the TCP Server Host Access List table.
                   ipadTCPServerHostAccessIndex 1.3.6.1.4.1.321.100.1.15.5.1.1 integer read-only
Index into the ipad trap destination table.
                   ipadTCPServerHostAccessIPAddr 1.3.6.1.4.1.321.100.1.15.5.1.2 ipaddress read-write
Trap destination.
     ipadSCADAConfig 1.3.6.1.4.1.321.100.1.16
           ipadSCADAConfigTable 1.3.6.1.4.1.321.100.1.16.1 no-access
The SCADA config table.
               ipadSCADAConfigTableEntry 1.3.6.1.4.1.321.100.1.16.1.1 no-access
An entry in the SCADA config table.
                   ipadSCADACfgIndex 1.3.6.1.4.1.321.100.1.16.1.1.1 integer read-only
The index for SCADA config table.
                   ipadSCADACfgMessageSize 1.3.6.1.4.1.321.100.1.16.1.1.2 integer read-write
The SCADA message size.
                   ipadSCADACfgIdleCharDelay 1.3.6.1.4.1.321.100.1.16.1.1.3 integer read-write
The SCADA idle character delay.
                   ipadSCADACfgInputTerminator 1.3.6.1.4.1.321.100.1.16.1.1.4 integer read-write
The SCADA input message terminator.
                   ipadSCADACfgAddDevLst 1.3.6.1.4.1.321.100.1.16.1.1.5 integer read-write
Appends an entry to the SCADA device list table. Enumeration: 'other': 1, 'addnew': 2.
                   ipadSCADACfgDeleteDevLst 1.3.6.1.4.1.321.100.1.16.1.1.6 integer read-write
Deletes an entry in the SCADA device list table.
                   ipadSCADACfgDataDirection 1.3.6.1.4.1.321.100.1.16.1.1.7 integer read-write
Data Direction enables for SCADA configuration. Enumeration: 'both': 2, 'other': 1, 'input': 4, 'output': 3.
                   ipadSCADACfgProtocol 1.3.6.1.4.1.321.100.1.16.1.1.8 integer read-write
Configured SCADA Protocol. Enumeration: 'async': 2, 'other': 1, 'syncVancommHost': 3, 'syncVancommRTU': 4.
                   ipadSCADACfgLoopback 1.3.6.1.4.1.321.100.1.16.1.1.9 integer read-write
Loopback allows user to loop data to either Network, Serial Port or both. Enumeration: 'both': 4, 'none': 1, 'network': 2, 'port': 3.
     ipadSCADAStats 1.3.6.1.4.1.321.100.1.17
           ipadSCADAStatsTable 1.3.6.1.4.1.321.100.1.17.1 no-access
The SCADA statistics table.
               ipadSCADAStatsTableEntry 1.3.6.1.4.1.321.100.1.17.1.1 no-access
An entry in the SCADA statistics table.
                   ipadSCADAStatsIndex 1.3.6.1.4.1.321.100.1.17.1.1.1 integer read-only
The index for SCADA Statistics Table.
                   ipadSCADAStatsTxChars 1.3.6.1.4.1.321.100.1.17.1.1.2 integer read-only
The number of chracters transmitted through SCADA port.
                   ipadSCADAStatsRxChars 1.3.6.1.4.1.321.100.1.17.1.1.3 integer read-only
The number of chracters received through SCADA port.
                   ipadSCADAStatsTxMsgs 1.3.6.1.4.1.321.100.1.17.1.1.4 integer read-only
The number of messages transmitted through SCADA port.
                   ipadSCADAStatsRxMsgs 1.3.6.1.4.1.321.100.1.17.1.1.5 integer read-only
The number of messages received through SCADA port.
                   ipadSCADAStatsRxParityErrors 1.3.6.1.4.1.321.100.1.17.1.1.6 integer read-only
The number of parity errors received from SCADA port.
                   ipadSCADAStatsRxFramingErrors 1.3.6.1.4.1.321.100.1.17.1.1.7 integer read-only
The number of framming errors received from SCADA port.
                   ipadSCADAStatsClear 1.3.6.1.4.1.321.100.1.17.1.1.8 integer read-write
Writing a value of ipadSCADAStatsClearNow(2) to this field causes all existing stats to be cleared immediately. Enumeration: 'ipadSCADAStatsClearNow': 2, 'ipadSCADAStatsClearOther': 1.
     ipadSCADADevLst 1.3.6.1.4.1.321.100.1.18
           ipadSCADADevLstTable 1.3.6.1.4.1.321.100.1.18.1 no-access
The SCADA device list table.
               ipadSCADADevLstTableEntry 1.3.6.1.4.1.321.100.1.18.1.1 no-access
An entry in the SCADA device list table.
                   ipadSCADADevLstIndex 1.3.6.1.4.1.321.100.1.18.1.1.1 integer read-only
The index for SCADA device list table.
                   ipadSCADADevLstDevIndex 1.3.6.1.4.1.321.100.1.18.1.1.2 integer read-only
The index of device.
                   ipadSCADADevLstEndpointName 1.3.6.1.4.1.321.100.1.18.1.1.3 displaystring read-write
The name of the endpoint.
                   ipadSCADADevLstEntryStatus 1.3.6.1.4.1.321.100.1.18.1.1.4 integer read-write
The disabled or dnabled status of the entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
     ipadDS0Config 1.3.6.1.4.1.321.100.1.19
           ipadDS0ConfigTable 1.3.6.1.4.1.321.100.1.19.1 no-access
The ipad DS0 Utilization Monitor Config table.
               ipadDS0ConfigTableEntry 1.3.6.1.4.1.321.100.1.19.1.1 no-access
An entry in the ipad DS0 Utilization Monitor Config table.
                   ipadDS0ConfigIndex 1.3.6.1.4.1.321.100.1.19.1.1.1 integer read-only
Index into the DS0 Utilization Monitor Config table.
                   ipadDS0ConfigNumberDS0 1.3.6.1.4.1.321.100.1.19.1.1.2 integer read-only
Number of DS0's monitored by this table entry.
                   ipadDS0ConfigResetTimer 1.3.6.1.4.1.321.100.1.19.1.1.3 integer read-write
Number of contiguous seconds a utilization alarm must not be present before the alarm condition is automatically reset.
                   ipadDS0ConfigHighUtil 1.3.6.1.4.1.321.100.1.19.1.1.4 integer read-write
What the user considers a high DS0 utilization for this entry. Utilization is expressed as a percentage.
                   ipadDS0ConfigHighUtilThreshold 1.3.6.1.4.1.321.100.1.19.1.1.5 integer read-write
Number of seconds a high utilization condition must be present within 15 minutes before an alarm condition is declared.
                   ipadDS0ConfigHighUtilStatus 1.3.6.1.4.1.321.100.1.19.1.1.6 integer read-only
Indicates if a high utilization condition exists. Enumeration: 'notExist': 2, 'other': 1, 'exists': 3.
                   ipadDS0ConfigHighUtilCount 1.3.6.1.4.1.321.100.1.19.1.1.7 integer read-only
The number of seconds in the past 15 minutes that have been greater than or equal to the high utilization parameter. The value is calculated from a sliding window of 15 one-minute buckets.
                   ipadDS0ConfigHighUtilAlarm 1.3.6.1.4.1.321.100.1.19.1.1.8 integer read-only
Indicates if the high utilization alarm threshold is exceeded. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                   ipadDS0ConfigLowUtil 1.3.6.1.4.1.321.100.1.19.1.1.9 integer read-write
What the user considers an end-of-day low DS0 utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the low utilization alarm is disabled.
                   ipadDS0ConfigLowUtilAlarm 1.3.6.1.4.1.321.100.1.19.1.1.10 integer read-only
Indicates if the low utilization alarm is declared. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                   ipadDS0ConfigReset 1.3.6.1.4.1.321.100.1.19.1.1.11 integer read-write
The set values perform the following actions: clearAlarms(2) - Clears any active DS0 utilization alarms and counts clearHistory(3) - Clears DS0 utilization history tables. Enumeration: 'clearHistory': 3, 'none': 1, 'clearAlarms': 2.
     ipadDS0Hist24 1.3.6.1.4.1.321.100.1.20
           ipadDS0Hist24Table 1.3.6.1.4.1.321.100.1.20.1 no-access
The ipad DS0 Utilization Monitor 24-Hour History table.
               ipadDS0Hist24TableEntry 1.3.6.1.4.1.321.100.1.20.1.1 no-access
An entry in the ipad DS0 Utilization Monitor 24-Hour History table.
                   ipadDS0Hist24Index 1.3.6.1.4.1.321.100.1.20.1.1.1 integer read-only
Index into the DS0 Utilization Monitor 24-Hour History table.
                   ipadDS0Hist24HistoricalIndex 1.3.6.1.4.1.321.100.1.20.1.1.2 integer read-only
Historical index into the DS0 Utilization Monitor 24-Hour History table. Enumeration: 'statPeriod58': 60, 'statPeriod59': 61, 'statPeriod56': 58, 'statPeriod57': 59, 'statPeriod54': 56, 'statPeriod55': 57, 'statPeriod52': 54, 'statPeriod53': 55, 'statPeriod50': 52, 'statPeriod51': 53, 'statPeriod49': 51, 'statPeriod48': 50, 'statPeriod41': 43, 'statPeriod40': 42, 'statPeriod43': 45, 'statPeriod42': 44, 'statPeriod45': 47, 'statPeriod44': 46, 'statPeriod47': 49, 'statPeriod46': 48, 'statPeriod38': 40, 'statPeriod39': 41, 'statPeriod34': 36, 'statPeriod35': 37, 'statPeriod36': 38, 'statPeriod37': 39, 'statPeriod30': 32, 'statPeriod31': 33, 'statPeriod32': 34, 'statPeriod33': 35, 'statPeriod29': 31, 'statPeriod28': 30, 'statPeriod27': 29, 'statPeriod26': 28, 'statPeriod25': 27, 'statPeriod24': 26, 'statPeriod23': 25, 'statPeriod22': 24, 'statPeriod21': 23, 'statPeriod20': 22, 'statPeriod8': 10, 'statPeriod9': 11, 'statPeriod1': 3, 'statPeriod2': 4, 'statPeriod3': 5, 'statPeriod4': 6, 'statPeriod5': 7, 'statPeriod6': 8, 'statPeriod7': 9, 'statPeriod92': 94, 'statPeriod93': 95, 'statPeriod90': 92, 'statPeriod91': 93, 'statPeriod96': 98, 'statPeriod94': 96, 'statPeriod95': 97, 'statPeriod18': 20, 'statPeriod19': 21, 'statPeriod12': 14, 'statPeriod13': 15, 'statPeriod10': 12, 'statPeriod11': 13, 'statPeriod16': 18, 'statPeriod17': 19, 'statPeriod14': 16, 'statPeriod15': 17, 'statSummary': 1, 'statPeriod70': 72, 'statPeriod71': 73, 'statPeriod72': 74, 'statPeriod73': 75, 'statPeriod74': 76, 'statPeriod75': 77, 'statPeriod76': 78, 'statPeriod77': 79, 'statPeriod78': 80, 'statPeriod79': 81, 'statPeriod89': 91, 'statPeriod88': 90, 'statPeriod85': 87, 'statPeriod84': 86, 'statPeriod87': 89, 'statPeriod86': 88, 'statPeriod81': 83, 'statPeriod80': 82, 'statPeriod83': 85, 'statPeriod82': 84, 'statPeriod63': 65, 'statPeriod62': 64, 'statPeriod61': 63, 'statPeriod60': 62, 'statPeriod67': 69, 'statPeriod66': 68, 'statPeriod65': 67, 'statPeriod64': 66, 'statPeriod69': 71, 'statPeriod68': 70, 'statCurrent': 2.
                   ipadDS0Hist24Timestamp 1.3.6.1.4.1.321.100.1.20.1.1.3 timeticks read-only
SysUpTime when the utilization interval completed.
                   ipadDS0Hist24HighUtilSeconds 1.3.6.1.4.1.321.100.1.20.1.1.4 integer read-only
The number of seconds in the interval that have been greater than or equal to the high utilization parameter.
                   ipadDS0Hist24Utilization 1.3.6.1.4.1.321.100.1.20.1.1.5 integer read-only
The percent of DS0's utilized over the given interval.
     ipadDS0Hist30 1.3.6.1.4.1.321.100.1.21
           ipadDS0Hist30Table 1.3.6.1.4.1.321.100.1.21.1 no-access
The ipad DS0 Utilization Monitor 30-Day History table.
               ipadDS0Hist30TableEntry 1.3.6.1.4.1.321.100.1.21.1.1 no-access
An entry in the ipad DS0 Utilization Monitor 30-Day History table.
                   ipadDS0Hist30Index 1.3.6.1.4.1.321.100.1.21.1.1.1 integer read-only
Index into the DS0 Utilization Monitor 30-Day History table.
                   ipadDS0Hist30HistoricalIndex 1.3.6.1.4.1.321.100.1.21.1.1.2 integer read-only
Historical index into the DS0 Utilization Monitor 30-Day History table. Enumeration: 'statDay9': 10, 'statDay30': 31, 'statDay18': 19, 'statDay19': 20, 'statDay12': 13, 'statDay13': 14, 'statDay10': 11, 'statDay11': 12, 'statDay16': 17, 'statDay17': 18, 'statDay14': 15, 'statDay15': 16, 'statDay8': 9, 'statSummary': 1, 'statDay1': 2, 'statDay2': 3, 'statDay3': 4, 'statDay4': 5, 'statDay5': 6, 'statDay6': 7, 'statDay7': 8, 'statDay29': 30, 'statDay28': 29, 'statDay27': 28, 'statDay26': 27, 'statDay25': 26, 'statDay24': 25, 'statDay23': 24, 'statDay22': 23, 'statDay21': 22, 'statDay20': 21.
                   ipadDS0Hist30Timestamp 1.3.6.1.4.1.321.100.1.21.1.1.3 timeticks read-only
SysUpTime when the utilization interval completed.
                   ipadDS0Hist30HighUtilSeconds 1.3.6.1.4.1.321.100.1.21.1.1.4 integer read-only
The number of seconds in the interval that have been greater than or equal to the high utilization parameter.
                   ipadDS0Hist30Utilization 1.3.6.1.4.1.321.100.1.21.1.1.5 integer read-only
The percent of DS0's utilized over the given interval.
     ipadHDLCConfig 1.3.6.1.4.1.321.100.1.22
           ipadHDLCConfigTable 1.3.6.1.4.1.321.100.1.22.1 no-access
The ipad HDLC Utilization Monitor Config table.
               ipadHDLCConfigTableEntry 1.3.6.1.4.1.321.100.1.22.1.1 no-access
An entry in the ipad HDLC Utilization Monitor Config table.
                   ipadHDLCConfigIndex 1.3.6.1.4.1.321.100.1.22.1.1.1 integer read-only
Index into the HDLC Utilization Monitor Config table.
                   ipadHDLCConfigService 1.3.6.1.4.1.321.100.1.22.1.1.2 integer read-write
Service the HDLC utilization monitor is attached. 0 = Disabled.
                   ipadHDLCConfigServiceBPS 1.3.6.1.4.1.321.100.1.22.1.1.3 integer read-only
Service bit rate.
                   ipadHDLCConfigResetTimer 1.3.6.1.4.1.321.100.1.22.1.1.4 integer read-write
Number of contiguous seconds a utilization alarm must not be present before the alarm condition is automatically reset.
                   ipadHDLCConfigRxHighUtil 1.3.6.1.4.1.321.100.1.22.1.1.5 integer read-write
What the user considers a high Rx HDLC utilization for this entry. Utilization is expressed as a percentage.
                   ipadHDLCConfigRxHighUtilThreshold 1.3.6.1.4.1.321.100.1.22.1.1.6 integer read-write
Number of seconds a Rx high utilization condition must be present within 15 minutes before an alarm condition is declared.
                   ipadHDLCConfigRxHighUtilStatus 1.3.6.1.4.1.321.100.1.22.1.1.7 integer read-only
Indicates if a Rx high utilization condition exists. Enumeration: 'notExist': 2, 'other': 1, 'exists': 3.
                   ipadHDLCConfigRxHighUtilCount 1.3.6.1.4.1.321.100.1.22.1.1.8 integer read-only
The number of seconds in the past 15 minutes that have been greater than or equal to the Rx high utilization parameter. The value is calculated from a sliding window of 15 one-minute buckets.
                   ipadHDLCConfigRxHighUtilAlarm 1.3.6.1.4.1.321.100.1.22.1.1.9 integer read-only
Indicates if the Rx high utilization alarm threshold is exceeded. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                   ipadHDLCConfigRxLowUtil 1.3.6.1.4.1.321.100.1.22.1.1.10 integer read-write
What the user considers an end-of-day low Rx HDLC utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the Rx low utilization alarm is disabled.
                   ipadHDLCConfigRxLowUtilAlarm 1.3.6.1.4.1.321.100.1.22.1.1.11 integer read-only
Indicates if the Rx low utilization alarm is declared. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                   ipadHDLCConfigTxHighUtil 1.3.6.1.4.1.321.100.1.22.1.1.12 integer read-write
What the user considers a high Tx HDLC utilization for this entry. Utilization is expressed as a percentage.
                   ipadHDLCConfigTxHighUtilThreshold 1.3.6.1.4.1.321.100.1.22.1.1.13 integer read-write
Number of seconds a Tx high utilization condition must be present within 15 minutes before an alarm condition is declared.
                   ipadHDLCConfigTxHighUtilStatus 1.3.6.1.4.1.321.100.1.22.1.1.14 integer read-only
Indicates if a Tx high utilization condition exists. Enumeration: 'notExist': 2, 'other': 1, 'exists': 3.
                   ipadHDLCConfigTxHighUtilCount 1.3.6.1.4.1.321.100.1.22.1.1.15 integer read-only
The number of seconds in the past 15 minutes that have been greater than or equal to the Tx high utilization parameter. The value is calculated from a sliding window of 15 one-minute buckets.
                   ipadHDLCConfigTxHighUtilAlarm 1.3.6.1.4.1.321.100.1.22.1.1.16 integer read-only
Indicates if the Tx high utilization alarm threshold is exceeded. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                   ipadHDLCConfigTxLowUtil 1.3.6.1.4.1.321.100.1.22.1.1.17 integer read-write
What the user considers an end-of-day low Tx HDLC utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the Tx low utilization alarm is disabled.
                   ipadHDLCConfigTxLowUtilAlarm 1.3.6.1.4.1.321.100.1.22.1.1.18 integer read-only
Indicates if the Tx low utilization alarm is declared. Enumeration: 'noAlarm': 2, 'thresholdExceeded': 3, 'other': 1.
                   ipadHDLCConfigReset 1.3.6.1.4.1.321.100.1.22.1.1.19 integer read-write
The set values perform the following actions: clearAlarms(2) - Clears any active HDLC utilization alarms and counts clearHistory(3) - Clears HDLC utilization history tables. Enumeration: 'clearHistory': 3, 'none': 1, 'clearAlarms': 2.
     ipadHDLCHist24 1.3.6.1.4.1.321.100.1.23
           ipadHDLCHist24Table 1.3.6.1.4.1.321.100.1.23.1 no-access
The ipad HDLC Utilization Monitor 24-Hour History table.
               ipadHDLCHist24TableEntry 1.3.6.1.4.1.321.100.1.23.1.1 no-access
An entry in the ipad HDLC Utilization Monitor 24-Hour History table.
                   ipadHDLCHist24Index 1.3.6.1.4.1.321.100.1.23.1.1.1 integer read-only
Index into the HDLC Utilization Monitor 24-Hour History table.
                   ipadHDLCHist24HistoricalIndex 1.3.6.1.4.1.321.100.1.23.1.1.2 integer read-only
Historical index into the HDLC Utilization Monitor 24-Hour History table. Enumeration: 'statPeriod58': 60, 'statPeriod59': 61, 'statPeriod56': 58, 'statPeriod57': 59, 'statPeriod54': 56, 'statPeriod55': 57, 'statPeriod52': 54, 'statPeriod53': 55, 'statPeriod50': 52, 'statPeriod51': 53, 'statPeriod49': 51, 'statPeriod48': 50, 'statPeriod41': 43, 'statPeriod40': 42, 'statPeriod43': 45, 'statPeriod42': 44, 'statPeriod45': 47, 'statPeriod44': 46, 'statPeriod47': 49, 'statPeriod46': 48, 'statPeriod38': 40, 'statPeriod39': 41, 'statPeriod34': 36, 'statPeriod35': 37, 'statPeriod36': 38, 'statPeriod37': 39, 'statPeriod30': 32, 'statPeriod31': 33, 'statPeriod32': 34, 'statPeriod33': 35, 'statPeriod29': 31, 'statPeriod28': 30, 'statPeriod27': 29, 'statPeriod26': 28, 'statPeriod25': 27, 'statPeriod24': 26, 'statPeriod23': 25, 'statPeriod22': 24, 'statPeriod21': 23, 'statPeriod20': 22, 'statPeriod8': 10, 'statPeriod9': 11, 'statPeriod1': 3, 'statPeriod2': 4, 'statPeriod3': 5, 'statPeriod4': 6, 'statPeriod5': 7, 'statPeriod6': 8, 'statPeriod7': 9, 'statPeriod92': 94, 'statPeriod93': 95, 'statPeriod90': 92, 'statPeriod91': 93, 'statPeriod96': 98, 'statPeriod94': 96, 'statPeriod95': 97, 'statPeriod18': 20, 'statPeriod19': 21, 'statPeriod12': 14, 'statPeriod13': 15, 'statPeriod10': 12, 'statPeriod11': 13, 'statPeriod16': 18, 'statPeriod17': 19, 'statPeriod14': 16, 'statPeriod15': 17, 'statSummary': 1, 'statPeriod70': 72, 'statPeriod71': 73, 'statPeriod72': 74, 'statPeriod73': 75, 'statPeriod74': 76, 'statPeriod75': 77, 'statPeriod76': 78, 'statPeriod77': 79, 'statPeriod78': 80, 'statPeriod79': 81, 'statPeriod89': 91, 'statPeriod88': 90, 'statPeriod85': 87, 'statPeriod84': 86, 'statPeriod87': 89, 'statPeriod86': 88, 'statPeriod81': 83, 'statPeriod80': 82, 'statPeriod83': 85, 'statPeriod82': 84, 'statPeriod63': 65, 'statPeriod62': 64, 'statPeriod61': 63, 'statPeriod60': 62, 'statPeriod67': 69, 'statPeriod66': 68, 'statPeriod65': 67, 'statPeriod64': 66, 'statPeriod69': 71, 'statPeriod68': 70, 'statCurrent': 2.
                   ipadHDLCHist24Timestamp 1.3.6.1.4.1.321.100.1.23.1.1.3 timeticks read-only
SysUpTime when the utilization interval completed.
                   ipadHDLCHist24RxHighUtilSeconds 1.3.6.1.4.1.321.100.1.23.1.1.4 integer read-only
The number of seconds in the interval that have been greater than or equal to the Rx high utilization parameter.
                   ipadHDLCHist24RxUtilization 1.3.6.1.4.1.321.100.1.23.1.1.5 integer read-only
The percent of Rx HDLC bandwidth utilized over the given interval.
                   ipadHDLCHist24TxHighUtilSeconds 1.3.6.1.4.1.321.100.1.23.1.1.6 integer read-only
The number of seconds in the interval that have been greater than or equal to the Tx high utilization parameter.
                   ipadHDLCHist24TxUtilization 1.3.6.1.4.1.321.100.1.23.1.1.7 integer read-only
The percent of Tx HDLC bandwidth utilized over the given interval.
     ipadHDLCHist30 1.3.6.1.4.1.321.100.1.24
           ipadHDLCHist30Table 1.3.6.1.4.1.321.100.1.24.1 no-access
The ipad HDLC Utilization Monitor 30-Day History table.
               ipadHDLCHist30TableEntry 1.3.6.1.4.1.321.100.1.24.1.1 no-access
An entry in the ipad HDLC Utilization Monitor 30-Day History table.
                   ipadHDLCHist30Index 1.3.6.1.4.1.321.100.1.24.1.1.1 integer read-only
Index into the HDLC Utilization Monitor 30-Day History table.
                   ipadHDLCHist30HistoricalIndex 1.3.6.1.4.1.321.100.1.24.1.1.2 integer read-only
Historical index into the HDLC Utilization Monitor 30-Day History table. Enumeration: 'statDay9': 10, 'statDay30': 31, 'statDay18': 19, 'statDay19': 20, 'statDay12': 13, 'statDay13': 14, 'statDay10': 11, 'statDay11': 12, 'statDay16': 17, 'statDay17': 18, 'statDay14': 15, 'statDay15': 16, 'statDay8': 9, 'statSummary': 1, 'statDay1': 2, 'statDay2': 3, 'statDay3': 4, 'statDay4': 5, 'statDay5': 6, 'statDay6': 7, 'statDay7': 8, 'statDay29': 30, 'statDay28': 29, 'statDay27': 28, 'statDay26': 27, 'statDay25': 26, 'statDay24': 25, 'statDay23': 24, 'statDay22': 23, 'statDay21': 22, 'statDay20': 21.
                   ipadHDLCHist30Timestamp 1.3.6.1.4.1.321.100.1.24.1.1.3 timeticks read-only
SysUpTime when the utilization interval completed.
                   ipadHDLCHist30RxHighUtilSeconds 1.3.6.1.4.1.321.100.1.24.1.1.4 integer read-only
The number of seconds in the interval that have been greater than or equal to the Rx high utilization parameter.
                   ipadHDLCHist30RxUtilization 1.3.6.1.4.1.321.100.1.24.1.1.5 integer read-only
The percent of Rx HDLC bandwidth utilized over the given interval.
                   ipadHDLCHist30TxHighUtilSeconds 1.3.6.1.4.1.321.100.1.24.1.1.6 integer read-only
The number of seconds in the interval that have been greater than or equal to the Tx high utilization parameter.
                   ipadHDLCHist30TxUtilization 1.3.6.1.4.1.321.100.1.24.1.1.7 integer read-only
The percent of Tx HDLC bandwidth utilized over the given interval.
     ipadAtm 1.3.6.1.4.1.321.100.1.25
     ipadNat 1.3.6.1.4.1.321.100.1.26
     ipadDhcp 1.3.6.1.4.1.321.100.1.27
     ipadBridge 1.3.6.1.4.1.321.100.1.28
     ipadSmtp 1.3.6.1.4.1.321.100.1.29
           ipadSmtpMailServer 1.3.6.1.4.1.321.100.1.29.1 ipaddress read-write
IP Address of the .
           ipadSmtpDomainName 1.3.6.1.4.1.321.100.1.29.2 displaystring read-write
Domain Name of the SMTP client.
           ipadSmtpMailFrom 1.3.6.1.4.1.321.100.1.29.3 displaystring read-write
Name of the SMTP client, is used in the From section of the email.
           ipadSmtpRecipient1 1.3.6.1.4.1.321.100.1.29.4 displaystring read-write
Destination for the email.
           ipadSmtpRecipient2 1.3.6.1.4.1.321.100.1.29.5 displaystring read-write
Destination for the email.
           ipadSmtpRecipient3 1.3.6.1.4.1.321.100.1.29.6 displaystring read-write
Destination for the email.
           ipadSmtpRecipient4 1.3.6.1.4.1.321.100.1.29.7 displaystring read-write
Destination for the email.
           ipadSmtpRecipient5 1.3.6.1.4.1.321.100.1.29.8 displaystring read-write
Destination for the email.
     ipadEncryption 1.3.6.1.4.1.321.100.1.30
           ipadEncryptionEnable 1.3.6.1.4.1.321.100.1.30.1 integer read-write
Allow disabling encryption. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           ipadEncryptionStartupKey 1.3.6.1.4.1.321.100.1.30.2 displaystring read-write
           ipadEncryptionStartupKeyConfirm 1.3.6.1.4.1.321.100.1.30.3 displaystring read-write
           ipadEncryptionType 1.3.6.1.4.1.321.100.1.30.4 integer read-write
Enumeration: 'blowfish': 1, 'des': 2, 'triple-des': 3.
           ipadEncryptionKey1 1.3.6.1.4.1.321.100.1.30.5 displaystring read-write
           ipadEncryptionKey2 1.3.6.1.4.1.321.100.1.30.6 displaystring read-write
           ipadEncryptionKey3 1.3.6.1.4.1.321.100.1.30.7 displaystring read-write
           ipadEncryptionKey4 1.3.6.1.4.1.321.100.1.30.8 displaystring read-write
           ipadEncryptionKey5 1.3.6.1.4.1.321.100.1.30.9 displaystring read-write
           ipadEncryptionKey6 1.3.6.1.4.1.321.100.1.30.10 displaystring read-write
           ipadEncryptionKey7 1.3.6.1.4.1.321.100.1.30.11 displaystring read-write
           ipadEncryptionKey8 1.3.6.1.4.1.321.100.1.30.12 displaystring read-write
           ipadEncryptionKey9 1.3.6.1.4.1.321.100.1.30.13 displaystring read-write
           ipadEncryptionKey10 1.3.6.1.4.1.321.100.1.30.14 displaystring read-write
           ipadEncryptionKeyLife 1.3.6.1.4.1.321.100.1.30.15 integer read-write
     ipadAutoLearnDS0 1.3.6.1.4.1.321.100.1.31
           ipadAutoLearnDS0Table 1.3.6.1.4.1.321.100.1.31.1 no-access
The ipad Auto Learn DS0 Config table.
               ipadAutoLearnDS0TableEntry 1.3.6.1.4.1.321.100.1.31.1.1 no-access
An entry in the ipad Auto Learn DS0 Config table.
                   ipadAutoLearnDS0Index 1.3.6.1.4.1.321.100.1.31.1.1.1 integer read-only
The MIB-II ifIndex into the Auto Learn DS0 Config table.
                   ipadAutoLearnDS0Boot 1.3.6.1.4.1.321.100.1.31.1.1.2 integer read-write
Select when to automatically learn DS0 assignments: disable - Do not automatically learn DS0s enable - Learn on boot carrierDown - Learn on boot and while the ifIndex carrier is down serviceDown - Learn on boot and while the first service on ifIndex is down Enumeration: 'enable': 3, 'other': 1, 'serviceDown': 5, 'carrierDown': 4, 'disable': 2.
                   ipadAutoLearnDS0Rate 1.3.6.1.4.1.321.100.1.31.1.1.3 integer read-write
Select the rate of the learned DS0's. Enumeration: 'learnAs56K': 3, 'auto': 2, 'other': 1, 'learnAsVoice': 5, 'learnAs64K': 4.
                   ipadAutoLearnDS0Command 1.3.6.1.4.1.321.100.1.31.1.1.4 integer read-write
The set values perform the following actions: learnNow(2) - Attempt to learn the active DS0's now. Enumeration: 'none': 1, 'learnNow': 2.
     ipadUnitAccess 1.3.6.1.4.1.321.100.1.32
           ipadUnitAccessTable 1.3.6.1.4.1.321.100.1.32.1 no-access
The ipad Unit Access table.
               ipadUnitAccessTableEntry 1.3.6.1.4.1.321.100.1.32.1.1 no-access
An entry in the ipad Unit Access table.
                   ipadUnitAccessIndex 1.3.6.1.4.1.321.100.1.32.1.1.1 integer read-only
The MIB-II Index into the Unit Access table.
                   ipadUnitAccessIpa 1.3.6.1.4.1.321.100.1.32.1.1.2 ipaddress read-write
IP Address of Source to allow Unit Access.
                   ipadUnitAccessMask 1.3.6.1.4.1.321.100.1.32.1.1.3 ipaddress read-write
Mask of Source to allow Unit Access.
     ipadTFTPDownload 1.3.6.1.4.1.321.100.1.33
           ipadTFTPDownloadServerIpa 1.3.6.1.4.1.321.100.1.33.1 ipaddress read-write
TFTP Server IP Address.
           ipadTFTPDownloadFileName 1.3.6.1.4.1.321.100.1.33.2 displaystring read-write
TFTP Filename to Download or Upload.
           ipadTFTPDownloadAction 1.3.6.1.4.1.321.100.1.33.3 integer read-write
TFTP Action to be performed. Enumeration: 'getfile': 1, 'putfile': 2, 'abort': 3, 'idle': 4.
           ipadTFTPDownloadStatus 1.3.6.1.4.1.321.100.1.33.4 integer read-only
TFTP current status of action. Enumeration: 'aborting': 4, 'fileAccessFailed': 7, 'successful': 5, 'invalidFile': 8, 'idle': 1, 'gettingfile': 2, 'invalidFileName': 6, 'puttingfile': 3.
     ipadDataLineMonitor 1.3.6.1.4.1.321.100.1.34
           ipadDLMConfig 1.3.6.1.4.1.321.100.1.34.1
               ipadDLMConfigMode 1.3.6.1.4.1.321.100.1.34.1.1 integer read-write
Data Link Monitor on/off switch. Toggles mode from analyze (static) to live (capture). Enumeration: 'analyze': 2, 'live': 3, 'other': 1.
               ipadDLMConfigBufferManagement 1.3.6.1.4.1.321.100.1.34.1.2 integer read-write
The DLM has a buffer of n messages. Settings this object to wrap(2) allows the buffer to wrap around and be a continous buffer. stopOnFull(3) forces the capture of packets to stop once the end of the buffer is reached. Enumeration: 'wrap': 2, 'stopOnFull': 3, 'other': 1.
           ipadDLMTable 1.3.6.1.4.1.321.100.1.34.2 no-access
The ipad Data Line Monitor configuration table.
               ipadDLMTableEntry 1.3.6.1.4.1.321.100.1.34.2.1 no-access
An entry in the ipad DLM config table.
                   ipadDLMServiceIndex 1.3.6.1.4.1.321.100.1.34.2.1.1 integer read-only
The service index into the DLM table.
                   ipadDLMEnable 1.3.6.1.4.1.321.100.1.34.2.1.2 integer read-write
Enable/Disable the DLM on the specified service. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                   ipadDLMTxRxFilter 1.3.6.1.4.1.321.100.1.34.2.1.3 integer read-write
Allows the user to capture only received, transmit, or both. Enumeration: 'all': 2, 'other': 1, 'transmitOnly': 3, 'receiveOnly': 4.
                   ipadDLMPatternEnable 1.3.6.1.4.1.321.100.1.34.2.1.4 integer read-write
Enable/Disable the search for a specific pattern. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                   ipadDLMPattern 1.3.6.1.4.1.321.100.1.34.2.1.5 integer read-write
The pattern to search for in the captured packets.
                   ipadDLMPatternMask 1.3.6.1.4.1.321.100.1.34.2.1.6 integer read-write
The mask to use with ipadDLMPattern to search for in the captured packets.
                   ipadDLMPatternOffset 1.3.6.1.4.1.321.100.1.34.2.1.7 integer read-write
The offset into the packet to search for the pattern.
           ipadDLMPacketTable 1.3.6.1.4.1.321.100.1.34.3 no-access
The ipad Data Link Monitor packet table.
               ipadDLMPacketTableEntry 1.3.6.1.4.1.321.100.1.34.3.1 no-access
An entry in the ipad DLM packet table.
                   ipadDLMPacketIndex 1.3.6.1.4.1.321.100.1.34.3.1.1 integer read-only
The service index into the DLM table.
                   ipadDLMPacketServiceIndex 1.3.6.1.4.1.321.100.1.34.3.1.2 integer read-only
The service index the packet was captured on.
                   ipadDLMPacketTimestamp 1.3.6.1.4.1.321.100.1.34.3.1.3 timeticks read-only
The time that the packet was captured.
                   ipadDLMPacketDataDirection 1.3.6.1.4.1.321.100.1.34.3.1.4 integer read-only
The direction the data was goin in respect to the interface. Enumeration: 'transmit': 2, 'receive': 3, 'other': 1.
                   ipadDLMPacketSize 1.3.6.1.4.1.321.100.1.34.3.1.5 integer read-only
The size of the captured packet.
                   ipadDLMPacketData 1.3.6.1.4.1.321.100.1.34.3.1.6 octet string read-only
The contents of the first 32 bytes of the captured packet.
     ipadOrigPing 1.3.6.1.4.1.321.100.1.35
           ipadOrigPingCommand 1.3.6.1.4.1.321.100.1.35.1 integer read-write
Action command to start/stop sending PING messages. Enumeration: 'start': 3, 'other': 1, 'stop': 2, 'clearStats': 4.
           ipadOrigPingDestIPAddr 1.3.6.1.4.1.321.100.1.35.2 ipaddress read-write
Destination IP address of sent PING request messages.
           ipadOrigPingTimeout 1.3.6.1.4.1.321.100.1.35.3 integer read-write
Number of seconds to wait for a reply to a PING request message.
           ipadOrigPingSize 1.3.6.1.4.1.321.100.1.35.4 integer read-write
Number of bytes in a PING request message data field.
           ipadOrigPingToSend 1.3.6.1.4.1.321.100.1.35.5 integer read-write
Number of PING request messages to send.
           ipadOrigPingSent 1.3.6.1.4.1.321.100.1.35.6 integer read-only
Number of PING request messages sent.
           ipadOrigPingReplies 1.3.6.1.4.1.321.100.1.35.7 integer read-only
Number of PING response messages received.
           ipadOrigPingDelayMin 1.3.6.1.4.1.321.100.1.35.8 integer read-only
Minimum PING round trip delay in milliseconds.
           ipadOrigPingDelayAvg 1.3.6.1.4.1.321.100.1.35.9 integer read-only
Average PING round trip delay in milliseconds.
           ipadOrigPingDelayMax 1.3.6.1.4.1.321.100.1.35.10 integer read-only
Maximum PING round trip delay in milliseconds.
           ipadOrigPingReport 1.3.6.1.4.1.321.100.1.35.11 displaystring read-only
ASCII status report of originate PING activity.
           ipadOrigPingExceptReport 1.3.6.1.4.1.321.100.1.35.12 displaystring read-only
ASCII status report of last originate PING exception received.
     ipadTraps 1.3.6.1.4.1.321.100.1.999
             ipadTrapsPrefix 1.3.6.1.4.1.321.100.1.999.0
                 ipadFrPortRxInvalidFramesExceeded 1.3.6.1.4.1.321.100.1.999.0.25000
This trap is sent out when an ipad frame relay port receive invalid frames alarm threshold has been exceeded.
                 ipadFrPortRxThroughputExceeded 1.3.6.1.4.1.321.100.1.999.0.25001
This trap is sent out when an ipad frame relay port receive throughput threshold has been exceeded.
                 ipadFrPortTxThroughputExceeded 1.3.6.1.4.1.321.100.1.999.0.25002
This trap is sent out when an ipad frame relay port transmit throughput threshold has been exceeded.
                 ipadDLCItxCIRexceeded 1.3.6.1.4.1.321.100.1.999.0.25003
This trap is sent out when the Tx over CIR threshold has been exceeded. This threshold is the number of frames in excess of CIR.
                 ipadDLCItxBEexceeded 1.3.6.1.4.1.321.100.1.999.0.25004
This trap is sent out when the Tx over Be threshold has been exceeded. This threshold is the number of frames in excess of Be.
                 ipadDLCIRxCongestionExceeded 1.3.6.1.4.1.321.100.1.999.0.25005
This trap is sent out when the Rx congestion threshold has been exceeded. This threshold is the number of frames received with BECN/FECN.
                 ipadUserTxExceeded 1.3.6.1.4.1.321.100.1.999.0.25006
This trap is sent out when the Tx throughput threshold in bits per second has been exceeded. This threshold represents the number of bits for the user-selected protocol.
                 ipadDlciRxBECNinCIRAlarm 1.3.6.1.4.1.321.100.1.999.0.25007
This trap is sent out when a frame with BECN set has been received within CIR.
                 ipadDlciUASExceeded 1.3.6.1.4.1.321.100.1.999.0.25008
This trap is sent out when the UAS (unavailable seconds) threshold for the DLCI has been exceeded.
                 ipadserialDteDTRAlarmExists 1.3.6.1.4.1.321.100.1.999.0.25009
This trap is sent out when a DTR Loss alarm is declared.
                 ipadt1e1ESAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25010
This trap is sent out when an Errored Seconds alarm is declared.
                 ipadt1e1SESAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25011
This trap is sent out when a Severely Errored Seconds alarm is declared.
                 ipadt1e1LOSSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25012
This trap is sent out when a Loss of Signal Seconds alarm is declared.
                 ipadt1e1UASAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25013
This trap is sent out when an Unavailable Seconds alarm is declared.
                 ipadt1e1CSSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25014
This trap is sent out when a Controlled Slip Seconds alarm is declared.
                 ipadt1e1BPVSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25015
This trap is sent out when a Bipolar Violation Seconds alarm is declared.
                 ipadt1e1OOFSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25016
This trap is sent out when an Out of Frame Seconds alarm is declared.
                 ipadt1e1AISAlarmExists 1.3.6.1.4.1.321.100.1.999.0.25017
This trap is sent out when an Alarm Indication Signal alarm is declared.
                 ipadt1e1RASAlarmExists 1.3.6.1.4.1.321.100.1.999.0.25018
This trap is sent out when a Remote Alarm Signal alarm is declared.
                 ipadDLCIremoteSOSAlarm 1.3.6.1.4.1.321.100.1.999.0.25019
This trap is sent when the remote unit for a DLCI senses and reports an SOS condition.
                 ipadDdsLOSSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25020
This trap is sent out when a Loss of Signal Seconds alarm is declared.
                 ipadDdsOOFSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25021
This trap is sent out when an Out of Frame Seconds alarm is declared.
                 ipadDdsOOSSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25022
This trap is sent out when an Out of Service Seconds alarm is declared.
                 ipadDdsFDLSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25023
This trap is sent out when a FDL error Seconds alarm is declared.
                 ipadDdsBPVSAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25024
This trap is sent out when a Bipolar Violation Seconds alarm is declared.
                 ipadDS0HighAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25025
This trap is sent out when a high utilization alarm is declared.
                 ipadDS0LowAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25026
This trap is sent out when a low utilization alarm is declared.
                 ipadHDLCRxHighAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25027
This trap is sent out when a high Rx utilization alarm is declared.
                 ipadHDLCRxLowAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25028
This trap is sent out when a low Rx utilization alarm is declared.
                 ipadHDLCTxHighAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25029
This trap is sent out when a high Tx utilization alarm is declared.
                 ipadHDLCTxLowAlarmDeclared 1.3.6.1.4.1.321.100.1.999.0.25030
This trap is sent out when a low Tx utilization alarm is declared.
                 ipadDbuActivated 1.3.6.1.4.1.321.100.1.999.0.25031
This trap is sent out when Dial Backup becomes active.