INTEL-SYS-MIB: View SNMP OID List / Download MIB

VENDOR: INTEL CORPORATION


 Home MIB: INTEL-SYS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Intel-Common-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 snmp_agents 1.3.6.1.4.1.343.2.6
     agentConfiguration 1.3.6.1.4.1.343.2.6.1
         agentVendorName 1.3.6.1.4.1.343.2.6.1.1 displaystring read-only
Displays the SNMP agent's manufacturer name.
         agentProductName 1.3.6.1.4.1.343.2.6.1.2 displaystring read-only
Displays the product name that contains the SNMP agent.
         agentChassisIndex 1.3.6.1.4.1.343.2.6.1.3 integer read-only
Displays which chassis contains the SNMP agent's module.
         agentModuleIndex 1.3.6.1.4.1.343.2.6.1.4 integer read-only
Displays which module in the chassis is the SNMP agent's module. The chassis number is in the object agentChassisIndex.
         mibversion 1.3.6.1.4.1.343.2.6.1.5 displaystring read-only
Displays the version of the MIB supported by the SNMP agent.
         resetAgent 1.3.6.1.4.1.343.2.6.1.6 integer read-write
Performs a cold reset of the SNMP agent. If a new IP configuration was set, it will be used after the reset. Enumeration: 'reset': 1, 'notreset': 2.
     ipConfiguration 1.3.6.1.4.1.343.2.6.2
         ipAddressMethodInUse 1.3.6.1.4.1.343.2.6.2.1 integer read-only
Displays how the IP address in use was determined. For example, fixed means the IP address was assigned by the user and stored within the Management Module. BOOTP means the SNMP agent used a BOOTP server to get its IP configuration. Enumeration: 'fixed': 1, 'bootp': 2.
         ipAddressInUse 1.3.6.1.4.1.343.2.6.2.2 ipaddress read-only
Displays the IP address currently in use.
         gatewayorRouterAddrInUse 1.3.6.1.4.1.343.2.6.2.3 ipaddress read-only
Displays the default gateway address currently in use. This is the device that routes to a different network. Usually a router or a routing server.
         networkMaskInUse 1.3.6.1.4.1.343.2.6.2.4 ipaddress read-only
Displays the network (subnet) mask currently in use. This must match the masks of other devices on the same network.
         broadcastAddressInUse 1.3.6.1.4.1.343.2.6.2.5 ipaddress read-only
Displays the broadcast address currently in use.
         ipAddressMethodNextReset 1.3.6.1.4.1.343.2.6.2.6 integer read-write
Displays how the IP address will be determined after the SNMP agent is reset. For example, fixed means the IP address will be determined locally. BOOTP means the SNMP agent will search for a BOOTP server to get its IP configuration. Enumeration: 'fixed': 1, 'bootp': 2.
         ipAddressNextReset 1.3.6.1.4.1.343.2.6.2.7 ipaddress read-write
Displays the IP address the SNMP agent will use the next time it is reset.
         gatewayorRouterAddrNextReset 1.3.6.1.4.1.343.2.6.2.8 ipaddress read-write
Displays the default gateway the SNMP agent will use the next time it is reset.
         networkMaskNextReset 1.3.6.1.4.1.343.2.6.2.9 ipaddress read-write
Displays the netmask (subnet mask) the SNMP agent will use the next time it is reset.
     snmpConfiguration 1.3.6.1.4.1.343.2.6.3
         snmpReadCommunityString 1.3.6.1.4.1.343.2.6.3.1 displaystring read-write
Sets the password for reads from the SNMP agent's MIB.
         snmpWriteCommunityString 1.3.6.1.4.1.343.2.6.3.2 displaystring read-write
Sets the password for writes to the SNMP agent's MIB.
         snmpTrapReceiverMAX 1.3.6.1.4.1.343.2.6.3.3 integer read-only
Displays the maximum number of trap receiving stations.
         snmpTrapReceiverNumber 1.3.6.1.4.1.343.2.6.3.4 integer read-only
Displays the current number of trap receiving stations.
         snmpTrapAddressTable 1.3.6.1.4.1.343.2.6.3.5 no-access
Contains information on individual trap receiving stations.
             snmpTrapAddressEntry 1.3.6.1.4.1.343.2.6.3.5.1 no-access
                 trapAddrIndex 1.3.6.1.4.1.343.2.6.3.5.1.1 integer read-only
Displays the index number of the trap receiving station.
                 trapIPAddr 1.3.6.1.4.1.343.2.6.3.5.1.2 ipaddress read-write
Sets the IP address for a trap receiving station.
                 trapCommunityString 1.3.6.1.4.1.343.2.6.3.5.1.3 displaystring read-write
Sets the password for sending traps from the SNMP agent to the SNMP application on the trap receiving station.
                 trapStatus 1.3.6.1.4.1.343.2.6.3.5.1.4 integer read-write
Displays whether traps should be sent to this station (active) or whether traps should not be sent to this station (ignore). Enumeration: 'active': 1, 'ignore': 2.