INNOVX-DTE-MIB: View SNMP OID List / Download MIB

VENDOR: GENERAL DATACOMM


 Home MIB: INNOVX-DTE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INNOVX-CORE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dteAdmin 1.3.6.1.4.1.498.22.1.6.1
     dtesMIBversion 1.3.6.1.4.1.498.22.1.6.1.1 displaystring read-only
Identifies the version of the MIB as `X.YZT' where: X: Major Revision (1-9) Y: Minor Revision (0-9) Z: Typographical Revision (0-9) T: Test Revision (A-Z) Upon formal release, the test revision will not be present.
 dteCfg 1.3.6.1.4.1.498.22.1.6.2
     dteInterfaceType 1.3.6.1.4.1.498.22.1.6.2.1 integer read-write
Defines the DTE Interface Type. WEBFLAG V.28 V.35 RS-449 EIA-530 EIA-530A X.21 WEBEND Enumeration: 'v35': 2, 'v28': 1, 'eia530': 4, 'rs449': 3, 'eia530a': 5, 'x21': 6.
     dteTxInvertingTiming 1.3.6.1.4.1.498.22.1.6.2.2 integer read-write
normal(1) tx timing clocks the transmit data from the DTE using an internal generated clock. invert (2) Invert Internally generated transmit clock used to sample the transmit data from the DTE. external(3) uses the DTE clock, EXTCLK, to clock the transmit data from the DTE. WEBFLAG Slave Normal Slave Inverted External WEBEND Enumeration: 'slaveInvert': 2, 'external': 3, 'slaveNormal': 1.
     dteRxCarrier 1.3.6.1.4.1.498.22.1.6.2.3 integer read-write
The Receive Carrier option. This option controls the operation of DCD. WEBFLAG Forced On Normal Operation WEBEND Enumeration: 'forcedOn': 1, 'normal': 2.
     dteDsrControl 1.3.6.1.4.1.498.22.1.6.2.4 integer read-write
The DSR option. This option controls the operation of DSR. When forcedOn(1) is selected, DSR is normally on, if set for followsDTR(2) then DSR is on only when DTR is on. WEBFLAG Forced On Follows DTR WEBEND Enumeration: 'forcedOn': 1, 'followsDTR': 2.
 dteAlarmCfg 1.3.6.1.4.1.498.22.1.6.3
     dteDtrLossTrapSeverity 1.3.6.1.4.1.498.22.1.6.3.1 integer read-write
Controls the reporting and defines the severity of the Channel Data Terminal Ready Loss Alarm when this event occurs. WEBFLAG Inhibit Critical Major Minor Warning Info WEBEND Enumeration: 'info': 6, 'inhibit': 1, 'major': 3, 'critical': 2, 'warning': 5, 'minor': 4.
 dteDiagnostics 1.3.6.1.4.1.498.22.1.6.4
     dteLoopback 1.3.6.1.4.1.498.22.1.6.4.1 integer read-write
Control the DTE loopback to the channel. noTest(1) stops the test. toChan(2) starts a loopback toward the DTE. Enumeration: 'toChan': 2, 'noTest': 1.
     dteDiagTestDuration 1.3.6.1.4.1.498.22.1.6.4.2 integer read-write
Defines the length of the diagnostic test. Enumeration: 'testTime20Mins': 4, 'testTime5Mins': 2, 'testTime1Min': 1, 'testTime10Mins': 3.
     dteDiagTestStatus 1.3.6.1.4.1.498.22.1.6.4.3 integer read-only
Displays the test in progress, if any. Enumeration: 'statDteLoop': 1, 'statNoTestinProgress': 2.
 dteStatus 1.3.6.1.4.1.498.22.1.6.5
     dteLedStatus 1.3.6.1.4.1.498.22.1.6.5.1 octet string read-only
A bitwise snapshot of the front panel LED states, where 0 = LED off and 1 = LED on, as follows: LED description Octet 1 bit 7 - n/u bit 6 - n/u bit 5 - n/u bit 4 - n/u bit 3 - n/u bit 2 - DTE LMI LMI traffic on DTE bit 1 - SD EQP send data - equipment traffic bit 0 - RD EQP receive data - equipment traffic
     dtePortStatus 1.3.6.1.4.1.498.22.1.6.5.2 octet string read-only
A bitwise snapshot of interface port status conditions and EIA signals, where 0 = condition not present, and 1 = condition present, as follows: Octet 1 - DTE Interface Port Status bit 7 - n/u bit 6 - n/u bit 5 - n/u bit 4 - n/u bit 3 - n/u bit 2 - Transmit Activity bit 1 - Receive Activity bit 0 - DTR Loss
     dtePortFrameCounts 1.3.6.1.4.1.498.22.1.6.5.3 octet string read-only
The total number of frames transmitted and received on each interface port. This object will be reset to zero after a read, and after power up, soft reset, or factory defaults reset. Octet 1 - DTE Interface Transmit Frame Count Octet 2 bit 7 - 2^15 bit 7 - 2^7 bit 6 - 2^14 bit 6 - 2^6 bit 5 - 2^13 bit 5 - 2^5 bit 4 - 2^12 bit 4 - 2^4 bit 3 - 2^11 bit 3 - 2^3 bit 2 - 2^10 bit 2 - 2^2 bit 1 - 2^9 bit 1 - 2^1 bit 0 - 2^8 bit 0 - 2^0 Octet 3 - DTE Interface Receive Frame Count Octet 4 bit 7 - 2^15 bit 7 - 2^7 bit 6 - 2^14 bit 6 - 2^6 bit 5 - 2^13 bit 5 - 2^5 bit 4 - 2^12 bit 4 - 2^4 bit 3 - 2^11 bit 3 - 2^3 bit 2 - 2^10 bit 2 - 2^2 bit 1 - 2^9 bit 1 - 2^1 bit 0 - 2^8 bit 0 - 2^0