IEEE8021-SPB-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: IEEE8021-SPB-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, IEEE8021-TC-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ieee8021SpbMib 1.3.111.2.802.1.1.26
802.1 SPB MIB
       ieee8021SpbObjects 1.3.111.2.802.1.1.26.1
           ieee8021SpbSys 1.3.111.2.802.1.1.26.1.1
               ieee8021SpbSysAreaAddress 1.3.111.2.802.1.1.26.1.1.1 ieee8021spbareaaddress read-write
The three byte IS-IS Area Address to join. Normally SPB will use area 00:00:00 however if SPB is being used in conjunction with IPV4/V6 it may operate using the IS-IS area address already in use. This object is persistent.
               ieee8021SpbSysId 1.3.111.2.802.1.1.26.1.1.2 macaddress read-write
SYS ID used for all SPB instances on this bridge. A six byte network wide unique identifier. This is defaulted to the Bridge Address initially but may be overridden. This object is persistent.
               ieee8021SpbSysControlAddr 1.3.111.2.802.1.1.26.1.1.3 macaddress read-write
Group MAC that the ISIS control plane will use. SPB may use a number of different addresses for SPB Hello and LSP exchange. Section 27.2, 8.13.1.5 and Table 8-13 covers the different choices. The choices are as follows: 01:80:C2:00:00:14 = All Level 1 Intermediate Systems 01:80:C2:00:00:15 = All Level 2 Intermediate Systems 09:00:2B:00:00:05 = All Intermediate Systems. 01:80:C2:00:00:2E = All Provider Bridge Intermediate Systems. 01:80:C2:00:00:2F = All Customer Bridge Intermediate Systems. This object is persistent.
               ieee8021SpbSysName 1.3.111.2.802.1.1.26.1.1.4 snmpadminstring read-only
Name to be used to refer to this SPB bridge. This is advertised in IS-IS and used for management.
               ieee8021SpbSysBridgePriority 1.3.111.2.802.1.1.26.1.1.5 ieee8021spbbridgepriority read-only
This is a 16 bit quantity which ranks this SPB Bridge relative to others when breaking ties. This priority is the high 16 bits of the Bridge Identifier. Its impact depends on the tie breaking algorithm. Recommend values 0..15 be assigned to core switches to ensure diversity of the ECT Algorithms.
               ieee8021SpbmSysSPSourceId 1.3.111.2.802.1.1.26.1.1.6 ieee8021spbmspsourceid read-write
The Shortest Path Source Identifier. It is the high order 3 bytes for Group Address DA from this bridge. Note that only the 20 bits not including the top 4 bits are the SPSourceID. This object is persistent.
               ieee8021SpbvSysMode 1.3.111.2.802.1.1.26.1.1.7 ieee8021spbmode read-write
Indication of supporting SPBV mode auto(=1)/manual(=2) auto => enable SPBV mode and auto allocate SPVIDs. manual => enable SPBV mode and manually assign SPVIDs. This object is persistent.
               ieee8021SpbmSysMode 1.3.111.2.802.1.1.26.1.1.8 ieee8021spbmode read-write
Indication of supporting SPBM mode auto(=1)/manual(=2) auto => enable SPBM mode and auto allocate SPsourceID. manual => enable SPBM mode and manually assign SPsourceID. This object is persistent.
               ieee8021SpbSysDigestConvention 1.3.111.2.802.1.1.26.1.1.9 ieee8021spbdigestconvention read-write
The Agreement Digest convention setting off(=1)/loopFreeBoth(=2)/loopFreeMcastOnly(=3) off => disable agreement digest checking in hellos loopFreeBoth => block unsafe group and individual traffic when digests disagree. loopFreeMcastOnly =>block unsafe group traffic when digests disagree. This object is persistent.
           ieee8021SpbMtidStaticTable 1.3.111.2.802.1.1.26.1.2 no-access
A Table of multiple logical topologies - MT.
               ieee8021SpbMtidStaticTableEntry 1.3.111.2.802.1.1.26.1.2.1 no-access
This table configures a MTID to a topology index. A topology index uniquely identifies a specific ISIS topology enabling multiple instances or multiple MTIDs within an instance.
                   ieee8021SpbMtidStaticEntryMtid 1.3.111.2.802.1.1.26.1.2.1.1 ieee8021spbmtid no-access
ISIS Multi Topology Identifier MTID Each MTID defines logical topology and is used to enable multiple SPB instances within one ISIS instance.
                   ieee8021SpbMTidStaticEntryMtidOverload 1.3.111.2.802.1.1.26.1.2.1.2 truthvalue read-only
When set for this logical topology this bridge can only originate or terminate traffic. It cannot transit SPB encapsulated traffic. This is the IS-IS overload feature specific to an SPB IS-IS MTID logical topology. This object is persistent.
                   ieee8021SpbMtidStaticEntryRowStatus 1.3.111.2.802.1.1.26.1.2.1.3 rowstatus read-only
The object indicates the status of an entry, and is used to create/delete entries. This object is persistent. This object is persistent.
                   ieee8021SpbTopIx 1.3.111.2.802.1.1.26.1.2.1.4 ieee8021spbmtid no-access
Unique identifier of this SPB topology This is index is allocated for this ISIS/MT instance. It is used as an index to most other SPB tables below and to select the exact ISIS instance and which MT instance together.
           ieee8021SpbTopIxDynamicTable 1.3.111.2.802.1.1.26.1.3 no-access
This table is for SPB dynamic information. The dynamic information that is sent in this bridges Hellos.
               ieee8021SpbTopIxDynamicTableEntry 1.3.111.2.802.1.1.26.1.3.1 no-access
This table displays the digest information computed for this bridge. A bridge configures this information in MTID 0 only.
                   ieee8021SpbTopIxDynamicEntryTopIx 1.3.111.2.802.1.1.26.1.3.1.1 ieee8021spbmtid no-access
ISIS-SPB Topology Index identifier Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
                   ieee8021SpbTopIxDynamicEntryAgreeDigest 1.3.111.2.802.1.1.26.1.3.1.2 ieee8021spbdigest read-only
The topology agreement digest value. Digest of all topology information, as in clause 28.4.
                   ieee8021SpbTopIxDynamicEntryMCID 1.3.111.2.802.1.1.26.1.3.1.3 ieee8021spbmcid read-only
The MST Identifier MCID. The MCID is a digest of the VID to MSTID configuration table which determines the Base VIDs enabled for SPBV and SPBM.
                   ieee8021SpbTopIxDynamicEntryAuxMCID 1.3.111.2.802.1.1.26.1.3.1.4 ieee8021spbmcid read-only
The aux MST Identifier for migration. Either MCID or AuxMCID must match for adjacency to form.
           ieee8021SpbEctStaticTable 1.3.111.2.802.1.1.26.1.4 no-access
The Equal Cost Tree (ECT) static configuration table.
               ieee8021SpbEctStaticTableEntry 1.3.111.2.802.1.1.26.1.4.1 no-access
The Equal Cost Tree static configuration Table defines the ECT-ALGORITHM for the Base VID and if SPBV is used for the SPVID.
                   ieee8021SpbEctStaticEntryTopIx 1.3.111.2.802.1.1.26.1.4.1.1 ieee8021spbmtid no-access
The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
                   ieee8021SpbEctStaticEntryBaseVid 1.3.111.2.802.1.1.26.1.4.1.2 vlanidorany no-access
Base VID to use for this ECT-ALGORITHM. Traffic B-VID (SPBM) or Management VID (SPBV). A Base VID value of 4095 is a wildcard for any Base VID assigned to SPB operation.
                   ieee8021SpbEctStaticEntryEctAlgorithm 1.3.111.2.802.1.1.26.1.4.1.3 ieee8021spbectalgorithm read-only
This identifies the tie-breaking algorithms used in Shortest Path Tree computation. Values range from 00-80-c2-01 to 00-80-c2-16 for 802.1 for each the 16 ECT behaviors. The default is 00-80-c2-01 the LowPATHID. This object is persistent.
                   ieee8021SpbvEctStaticEntrySpvid 1.3.111.2.802.1.1.26.1.4.1.4 vlanidornone read-only
If SPBV mode this is the VID originating from this bridge. This input is ignored if ieee8021SpbvSysMode is auto(1), but the output always returns the SPVID in use. Otherwise in SPBM this is empty, should be set = 0. This object is persistent.
                   ieee8021SpbEctStaticEntryRowStatus 1.3.111.2.802.1.1.26.1.4.1.5 rowstatus read-only
The object indicates the status of an entry, and is used to create/delete entries. This object is persistent.
           ieee8021SpbEctDynamicTable 1.3.111.2.802.1.1.26.1.5 no-access
A table containing Data about the ECT behavior on this bridge
               ieee8021SpbEctDynamicTableEntry 1.3.111.2.802.1.1.26.1.5.1 no-access
This table can be used to check that neighbor bridges are using the same ECT Algorithm.
                   ieee8021SpbEctDynamicEntryTopIx 1.3.111.2.802.1.1.26.1.5.1.1 ieee8021spbmtid no-access
The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
                   ieee8021SpbEctDynamicEntryBaseVid 1.3.111.2.802.1.1.26.1.5.1.2 vlanid no-access
The Base VID being queried. Base VID define the mode in the VID to MSTID table.
                   ieee8021SpbEctDynamicEntryMode 1.3.111.2.802.1.1.26.1.5.1.3 ieee8021spbectmode read-only
The Operating mode of this Base VID. SPBM (=2), SPBV (=3), or disabled or none (1).
                   ieee8021SpbEctDynamicEntryLocalUse 1.3.111.2.802.1.1.26.1.5.1.4 truthvalue read-only
This value indicates the ECT is in use locally (True/False) for this Base Vid. ECTs may be defined before services are assigned.
                   ieee8021SpbEctDynamicEntryRemoteUse 1.3.111.2.802.1.1.26.1.5.1.5 truthvalue read-only
This value indicates the remote ECT is in use (True/False) for this Base Vid. ECTs may be defined before services are assigned.
                   ieee8021SpbEctDynamicEntryIngressCheckDiscards 1.3.111.2.802.1.1.26.1.5.1.6 unsigned32 read-only
The number of SA check failures on this ECT VID This is referred to as the ingress check and this counter increments whenever a packet is discarded for this VID because it has not come from an interface which is on the shortest path to its SA.
           ieee8021SpbAdjStaticTable 1.3.111.2.802.1.1.26.1.6 no-access
A table containing the SPB configuration data for a neighbor
               ieee8021SpbAdjStaticTableEntry 1.3.111.2.802.1.1.26.1.6.1 no-access
This table can be used to display the interfaces and metrics of a neighbor bridge.
                   ieee8021SpbAdjStaticEntryTopIx 1.3.111.2.802.1.1.26.1.6.1.1 ieee8021spbmtid no-access
The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
                   ieee8021SpbAdjStaticEntryIfIndex 1.3.111.2.802.1.1.26.1.6.1.2 interfaceindexorzero no-access
The System interface/index which defines this adjacency. A value of 0 is a wildcard for any interface on which SPB Operation is supported.
                   ieee8021SpbAdjStaticEntryMetric 1.3.111.2.802.1.1.26.1.6.1.3 ieee8021spblinkmetric read-only
The ieee8021Spb metric (incremental cost) to this peer. The contribution of this link to total path cost. Recommended values are inversely proportional to link speed. Range is (1..16777215) where 16777215 (0xFFFFFF) is infinity; infinity signifies that the adjacency is UP, but is not to be used for traffic. This object is persistent.
                   ieee8021SpbAdjStaticEntryIfAdminState 1.3.111.2.802.1.1.26.1.6.1.4 ieee8021spbadjstate read-only
The administrative state of this interface/port. Up is the default. This object is persistent.
                   ieee8021SpbAdjStaticEntryRowStatus 1.3.111.2.802.1.1.26.1.6.1.5 rowstatus read-only
The object indicates the status of an entry, and is used to create/delete entries. This object is persistent.
           ieee8021SpbAdjDynamicTable 1.3.111.2.802.1.1.26.1.7 no-access
The SPB neighbor dynamic information table.
               ieee8021SpbAdjDynamicTableEntry 1.3.111.2.802.1.1.26.1.7.1 no-access
This table is used to determine operational values of digests and interfaces of neighbor bridges.
                   ieee8021SpbAdjDynamicEntryTopIx 1.3.111.2.802.1.1.26.1.7.1.1 ieee8021spbmtid no-access
The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
                   ieee8021SpbAdjDynamicEntryIfIndex 1.3.111.2.802.1.1.26.1.7.1.2 interfaceindexorzero no-access
System interface/index which defines this adjacency A value of 0 is a wildcard for any interface on which SPB Operation is enabled.
                   ieee8021SpbAdjDynamicEntryPeerSysId 1.3.111.2.802.1.1.26.1.7.1.3 macaddress no-access
The SPB System Identifier of this peer. This is used to identify a neighbor uniquely.
                   ieee8021SpbAdjDynamicEntryPort 1.3.111.2.802.1.1.26.1.7.1.4 ieee8021bridgeportnumber read-only
The port number to reach this adjacency.
                   ieee8021SpbAdjDynamicEntryIfOperState 1.3.111.2.802.1.1.26.1.7.1.5 ieee8021spbadjstate read-only
The operational state of this port. up, down or testing (in test).
                   ieee8021SpbAdjDynamicEntryPeerSysName 1.3.111.2.802.1.1.26.1.7.1.6 snmpadminstring read-only
IS-IS system name of peer. This is the ASCII name assigned to the bridge to aid management. It is the same as the ieee8021SpbSysName.
                   ieee8021SpbAdjDynamicEntryPeerAgreeDigest 1.3.111.2.802.1.1.26.1.7.1.7 ieee8021spbdigest read-only
The peer topology agreement digest value (all of the elements defined in clause 28.4). If it does not match this bridge's digest it indicates loss of synchronization.
                   ieee8021SpbAdjDynamicEntryPeerMCID 1.3.111.2.802.1.1.26.1.7.1.8 ieee8021spbmcid read-only
The peer MST Identifier MCID. The MCID is a digest of the VID to MSTID configuration table which determines the Base VIDs enabled for SPBV and SPBM.
                   ieee8021SpbAdjDynamicEntryPeerAuxMCID 1.3.111.2.802.1.1.26.1.7.1.9 ieee8021spbmcid read-only
The peer auxiliary MST Identifier. This MCID is used for migration.
                   ieee8021SpbAdjDynamicEntryLocalCircuitID 1.3.111.2.802.1.1.26.1.7.1.10 unsigned32 read-only
The value used by IS-IS to identify this adjacency locally.
                   ieee8021SpbAdjDynamicEntryPeerLocalCircuitID 1.3.111.2.802.1.1.26.1.7.1.11 unsigned32 read-only
The value used by peer IS-IS to identify this adjacency remotely.
                   ieee8021SpbAdjDynamicEntryPortIdentifier 1.3.111.2.802.1.1.26.1.7.1.12 unsigned32 read-only
The value for this bridge which has been selected by IS-IS to form this adjacency if there is more than 1 candidate link.
                   ieee8021SpbAdjDynamicEntryPeerPortIdentifier 1.3.111.2.802.1.1.26.1.7.1.13 unsigned32 read-only
The value for peer port Identifier selected by IS-IS to form this adjacency if there is more than 1 candidate link.
                   ieee8021SpbAdjDynamicEntryIsisCircIndex 1.3.111.2.802.1.1.26.1.7.1.14 unsigned32 read-only
The isisCircTable reference. This allows cross referencing to an IS-IS MIB.
           ieee8021SpbTopNodeTable 1.3.111.2.802.1.1.26.1.8 no-access
Table of network specific bridge information.
               ieee8021SpbTopNodeTableEntry 1.3.111.2.802.1.1.26.1.8.1 no-access
This table is used to display system level information about bridges in the network.
                   ieee8021SpbTopNodeEntryTopIx 1.3.111.2.802.1.1.26.1.8.1.1 ieee8021spbmtid no-access
The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
                   ieee8021SpbTopNodeEntrySysId 1.3.111.2.802.1.1.26.1.8.1.2 macaddress no-access
The IS-IS System ID of a bridge in the SPB LSP database and hence the network. A value of 0 is a wildcard for all System identifiers.
                   ieee8021SpbTopNodeEntryBridgePriority 1.3.111.2.802.1.1.26.1.8.1.3 ieee8021spbbridgepriority read-only
The Bridge Priority of the bridge in the LSP database. This is a 16 bit quantity which ranks this SPB Bridge relative to others when breaking ties. This priority is the high 16 bits of the Bridge Identifier. Its impact depends on the tie breaking algorithm. Recommend values 0..15 be assigned to core switches to ensure diversity of the ECT Algorithms.
                   ieee8021SpbmTopNodeEntrySPsourceID 1.3.111.2.802.1.1.26.1.8.1.4 ieee8021spbmspsourceid read-only
The Shortest Path Source Identifier. It is the high order 3 bytes for Group Address DA from this bridge. Note that only the 20 bits not including the top 4 bits are the SPSourceID.
                   ieee8021SpbTopNodeEntrySysName 1.3.111.2.802.1.1.26.1.8.1.5 snmpadminstring read-only
The System Name. A Human readable name of this bridge This is used to aid in management and is used in place of the System identifier in many commands and displays.
           ieee8021SpbTopEctTable 1.3.111.2.802.1.1.26.1.9 no-access
Table of all ECT use in the network
               ieee8021SpbTopEctTableEntry 1.3.111.2.802.1.1.26.1.9.1 no-access
This table lists bridges and the ECT Algorithms configured and in use.
                   ieee8021SpbTopEctEntryTopIx 1.3.111.2.802.1.1.26.1.9.1.1 ieee8021spbmtid no-access
The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
                   ieee8021SpbTopEctEntrySysId 1.3.111.2.802.1.1.26.1.9.1.2 macaddress no-access
The system ID which is using a particular ECT. A value of 0 is a wildcard for all System identifiers.
                   ieee8021SpbTopEctEntryBaseVid 1.3.111.2.802.1.1.26.1.9.1.3 vlanidorany no-access
Base VID related to this algorithm In the case of SPBM this is the B-VID that carries traffic for this ECT-ALGORITHM. In the case of SPBV this is the Base-VID used for management. A Base VID value of 4095 is a wildcard for any Base VID assigned to SPB operation.
                   ieee8021SpbTopEctEntryEctAlgorithm 1.3.111.2.802.1.1.26.1.9.1.4 ieee8021spbectalgorithm read-only
The ECT-ALGORITHM in use. A 32 bit number. The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.; the upper 24 bits are an OUI and the lower 8 bits are an index. This creates a world-wide unique identity for the computation that will be using the VID thus ensuring consistency.
                   ieee8021SpbTopEctEntryMode 1.3.111.2.802.1.1.26.1.9.1.5 ieee8021spbectmode read-only
Operating mode : SPBM (=2) or SPBV (=3)
                   ieee8021SpbvTopEctSysMode 1.3.111.2.802.1.1.26.1.9.1.6 ieee8021spbmode read-only
Indication of supporting SPBV mode auto(=1)/manual(=2) auto => SPBV mode and auto allocate SPVIDs. manual => SPBV mode and manually assign SPVIDs.
                   ieee8021SpbvTopEctEntrySpvid 1.3.111.2.802.1.1.26.1.9.1.7 vlanidornone read-only
SPVID in V mode The VID this bridge will use to originate traffic using this ECT-ALGORITHM when running in SPBV mode.
                   ieee8021SpbTopEctEntryLocalUse 1.3.111.2.802.1.1.26.1.9.1.8 truthvalue read-only
Is this ECT-ALGORITHM in use locally by advertising bridge :- TRUE or FALSE. This is used to help with disruption-free migration between ECT-ALGORITHMs. Changes are only allowed if this flag is FALSE.
           ieee8021SpbTopEdgeTable 1.3.111.2.802.1.1.26.1.10 no-access
A Table of edges in network (not duplicated), but each link will appear as two entries, one ordered {near-far}, the other {far-near}.
                 ieee8021SpbTopEdgeTableEntry 1.3.111.2.802.1.1.26.1.10.1 no-access
The table lists information about bridge edges (links).
                     ieee8021SpbTopEdgeEntryTopIx 1.3.111.2.802.1.1.26.1.10.1.1 ieee8021spbmtid no-access
The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
                     ieee8021SpbTopEdgeEntrySysIdNear 1.3.111.2.802.1.1.26.1.10.1.2 macaddress no-access
The System ID of near bridge (the bridge reporting the adjacency). A value of 0 is a wildcard for all System identifiers.
                     ieee8021SpbTopEdgeEntrySysIdFar 1.3.111.2.802.1.1.26.1.10.1.3 macaddress no-access
The System ID of far bridge (the neighbor of the bridge reporting). A value of 0 is a wildcard for all System identifiers.
                     ieee8021SpbTopEdgeEntryMetricNear2Far 1.3.111.2.802.1.1.26.1.10.1.4 ieee8021spblinkmetric read-only
The metric used on this edge advertised by near end This is the raw value. If it is less than the MetricFar2Near (below), the MetricFar2Near is used as the SPF metric in both directions.
                     ieee8021SpbTopEdgeEntryMetricFar2Near 1.3.111.2.802.1.1.26.1.10.1.5 ieee8021spblinkmetric read-only
The metric used on this edge advertised by far end This is the raw value. If it is less than the MetricNear2Far (above), the MetricNear2Far is used as the SPF metric in both directions.
           ieee8021SpbmTopSrvTable 1.3.111.2.802.1.1.26.1.11 no-access
All SPBM PBB encapsulated services in this network.
                 ieee8021SpbmTopSrvTableEntry 1.3.111.2.802.1.1.26.1.11.1 no-access
This table displays information about PBB services received in the LSP data base. The Service Identifier is associated with the MAC address and Base VID of the bridge that originates or terminates the service.
                     ieee8021SpbmTopSrvEntryTopIx 1.3.111.2.802.1.1.26.1.11.1.1 ieee8021spbmtid no-access
Entry of one The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
                     ieee8021SpbmTopSrvEntrySysId 1.3.111.2.802.1.1.26.1.11.1.2 macaddress no-access
The System identifier this service originates/terminates on. A value of 0 is a wildcard for all System identifiers.
                     ieee8021SpbmTopSrvEntryIsid 1.3.111.2.802.1.1.26.1.11.1.3 ieee8021spbserviceidentifierorany no-access
An ISID (service) originating/terminating on this bridge. A value of 0 is a wildcard for any ISID.
                     ieee8021SpbmTopSrvEntryBaseVid 1.3.111.2.802.1.1.26.1.11.1.4 vlanidorany no-access
The Base VID associated with this service. The Base VID determines the ECT Algorithm that is associated with this service. A Base VID value of 4095 is a wildcard for any Base VID assigned to SPB operation.
                     ieee8021SpbmTopSrvEntryMac 1.3.111.2.802.1.1.26.1.11.1.5 macaddress no-access
The MAC address associated with a service. An additional nodal MAC address by which an I-SID can be reached may be advertised, in which case traffic to this MAC follows a forwarding path identical to that taken to reach the corresponding SYSID (nodal) MAC. If no additional MAC is advertised this will be the SYSID MAC. A value of 0 is a wildcard for the MAC address.
                     ieee8021SpbmTopSrvEntryIsidFlags 1.3.111.2.802.1.1.26.1.11.1.6 ieee8021pbbingressegress read-only
A pair of flags defining the attributes of this service. These specify independently whether ingress frames to the SPBM region should be transmitted within it, and whether frames received from the SPBM region are required egress it.
           ieee8021SpbvTopSrvTable 1.3.111.2.802.1.1.26.1.12 no-access
The SPBV group services in this network
                 ieee8021SpbvTopSrvTableEntry 1.3.111.2.802.1.1.26.1.12.1 no-access
This table displays information about SPBV group address. The group address is a associated with MAC address and Base VID of the bridge that originates or terminates the service.
                     ieee8021SpbvTopSrvEntryTopIx 1.3.111.2.802.1.1.26.1.12.1.1 ieee8021spbmtid no-access
The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
                     ieee8021SpbvTopSrvEntrySysId 1.3.111.2.802.1.1.26.1.12.1.2 macaddress no-access
The System identifier advertising this group address. A value of 0 is a wildcard for all System identifiers.
                     ieee8021SpbvTopSrvEntryMMac 1.3.111.2.802.1.1.26.1.12.1.3 macaddress no-access
This Group MAC address entry. A value of 0 is a wildcard for any Group MAC address.
                     ieee8021SpbvTopSrvEntryBaseVid 1.3.111.2.802.1.1.26.1.12.1.4 vlanid read-only
The Base VID associated with this service. The Base VID determines the ECT Algorithm that is associated with this service.
                     ieee8021SpbvTopSrvEntryMMacFlags 1.3.111.2.802.1.1.26.1.12.1.5 ieee8021pbbingressegress read-only
A pair of {ingress, egress} flags for this Group Address, defining transmit/receive or both. This enables filtering of Group addresses to interwork with MMRP.
       ieee8021SpbConformance 1.3.111.2.802.1.1.26.2
           ieee8021SpbGroups 1.3.111.2.802.1.1.26.2.1
               ieee8021SpbSysGroupSPBM 1.3.111.2.802.1.1.26.2.1.1
The collection of objects used to represent ieee8021SpbSys
               ieee8021SpbMtidStaticTableGroupSPBM 1.3.111.2.802.1.1.26.2.1.2
The collection of objects used to represent ieee8021SpbMtidStaticTable
               ieee8021SpbTopIxDynamicTableGroupSPBM 1.3.111.2.802.1.1.26.2.1.3
The collection of objects used to represent ieee8021SpbTopIxDynamicTable
               ieee8021SpbEctStaticTableGroupSPBM 1.3.111.2.802.1.1.26.2.1.4
The collection of objects used to represent ieee8021SpbEctStaticTable
               ieee8021SpbEctDynamicTableGroupSPBM 1.3.111.2.802.1.1.26.2.1.5
The collection of objects used to represent ieee8021SpbEctDynamicTable
               ieee8021SpbAdjStaticTableGroupSPBM 1.3.111.2.802.1.1.26.2.1.6
The collection of objects used to represent ieee8021SpbAdjStaticTable
               ieee8021SpbAdjDynamicTableGroupSPBM 1.3.111.2.802.1.1.26.2.1.7
The collection of objects used to represent ieee8021SpbAdjDynamicTable
               ieee8021SpbTopNodeTableGroupSPBM 1.3.111.2.802.1.1.26.2.1.8
The collection of objects used to represent ieee8021SpbTopNodeTable
               ieee8021SpbTopEctTableGroupSPBM 1.3.111.2.802.1.1.26.2.1.9
The collection of objects used to represent ieee8021SpbTopEctTable
               ieee8021SpbTopEdgeTableGroupSPBM 1.3.111.2.802.1.1.26.2.1.10
The collection of objects used to represent ieee8021SpbTopEdgeTable
               ieee8021SpbmTopSrvTableGroupSPBM 1.3.111.2.802.1.1.26.2.1.11
The collection of objects used to represent ieee8021SpbmTopSrvTable
               ieee8021SpbSysGroupSPBV 1.3.111.2.802.1.1.26.2.1.12
The collection of objects used to represent ieee8021SpbSys
               ieee8021SpbMtidStaticTableGroupSPBV 1.3.111.2.802.1.1.26.2.1.13
The collection of objects used to represent ieee8021SpbMtidStaticTable
               ieee8021SpbTopIxDynamicTableGroupSPBV 1.3.111.2.802.1.1.26.2.1.14
The collection of objects used to represent ieee8021SpbTopIxDynamicTable
               ieee8021SpbEctStaticTableGroupSPBV 1.3.111.2.802.1.1.26.2.1.15
The collection of objects used to represent ieee8021SpbEctStaticTable
               ieee8021SpbEctDynamicTableGroupSPBV 1.3.111.2.802.1.1.26.2.1.16
The collection of objects used to represent ieee8021SpbEctDynamicTable
               ieee8021SpbAdjStaticTableGroupSPBV 1.3.111.2.802.1.1.26.2.1.17
The collection of objects used to represent ieee8021SpbAdjStaticTable
               ieee8021SpbAdjDynamicTableGroupSPBV 1.3.111.2.802.1.1.26.2.1.18
The collection of objects used to represent ieee8021SpbAdjDynamicTable
               ieee8021SpbTopNodeTableGroupSPBV 1.3.111.2.802.1.1.26.2.1.19
The collection of objects used to represent ieee8021SpbTopNodeTable
               ieee8021SpbTopEctTableGroupSPBV 1.3.111.2.802.1.1.26.2.1.20
The collection of objects used to represent ieee8021SpbTopEctTable
               ieee8021SpbTopEdgeTableGroupSPBV 1.3.111.2.802.1.1.26.2.1.21
The collection of objects used to represent ieee8021SpbTopEdgeTable
               ieee8021SpbvTopSrvTableGroupSPBV 1.3.111.2.802.1.1.26.2.1.22
The collection of objects used to represent ieee8021SpbvTopSrvTable
           ieee8021SpbCompliances 1.3.111.2.802.1.1.26.2.2
               ieee8021SpbComplianceSPBM 1.3.111.2.802.1.1.26.2.2.1
Compliance to IEEE 802.1 SPBM mode
               ieee8021SpbComplianceSPBV 1.3.111.2.802.1.1.26.2.2.2
Compliance to IEEE 802.1 SPBV mode