IEEE8021-EVBB-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: IEEE8021-EVBB-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, IEEE8021-TC-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ieee8021BridgeEvbMib 1.3.111.2.802.1.1.100
The EVB MIB module for managing devices that support Ethernet Virtual Bridging. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2010. Copyright (C) IEEE. This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
         ieee8021BridgeEvbNotifications 1.3.111.2.802.1.1.100.0
         ieee8021BridgeEvbObjects 1.3.111.2.802.1.1.100.1
             ieee8021BridgeEvbConfig 1.3.111.2.802.1.1.100.1.1
                 ieee8021BridgeEvbSysMACAddress 1.3.111.2.802.1.1.100.1.1.1 macaddress read-only
The evbSysMACAddress is any single MAC which uniquely identifies the system. This MAC may be chosen to be one of the MAC used to identify each component of the system
                 ieee8021BridgeEvbSysName 1.3.111.2.802.1.1.100.1.1.2 snmpadminstring read-write
The evbSysName is a string which may to set by management to identify this system.
                 ieee8021BridgeEvbSysType 1.3.111.2.802.1.1.100.1.1.3 integer read-only
The evbSysType determines if this is an EVB Bridge or EVB station. Enumeration: 'evbStation': 2, 'evbBridge': 1.
                 ieee8021BridgeEvbSysNumExternalPorts 1.3.111.2.802.1.1.100.1.1.4 unsigned32 read-only
TBD
                 ieee8021BridgeEvbSysEvbLldpEnables 1.3.111.2.802.1.1.100.1.1.5 bits read-write
This object is used to initialize the S-Channel interface table entry. Bits: 'autoEvbLLDPTLV': 1, 'evbTLVEnable': 0.
                 ieee8021BridgeEvbSysEvbLldpDfltMode 1.3.111.2.802.1.1.100.1.1.6 ieee8021bridgeevbtlvtc read-write
The value of this object is used as the initial value for the ieee8021BridgeEvbCAPLldpAdminCap.
                 ieee8021BridgeEvbSysEvbLldpNumVsisSup 1.3.111.2.802.1.1.100.1.1.7 unsigned32 read-write
This is the total number of VSIs which this system may support and is used to fill out the EVB TLV field for Number VSIs Supported
                 ieee8021BridgeEvbSysNumCorErComps 1.3.111.2.802.1.1.100.1.1.8 unsigned32 read-only
TBD
                 ieee8021BridgeEvbSysNumSComps 1.3.111.2.802.1.1.100.1.1.9 unsigned32 read-only
TBD
                 ieee8021BridgeEvbECPACkTimer 1.3.111.2.802.1.1.100.1.1.10 integer32 read-write
A value indicating the Bridge Proposed ECP ackTimer.
                 ieee8021BridgeEvbECPMaxRetires 1.3.111.2.802.1.1.100.1.1.11 integer32 read-write
A value indicating the Bridge ECP maxRetries.
                 ieee8021BridgeEvbSysVdpDfltRsrcWaitDelay 1.3.111.2.802.1.1.100.1.1.12 integer32 read-write
A value indicating the Bridge Resource VDP Timeout.
                 ieee8021BridgeEvbSysVdpDfltReinitKeepAlive 1.3.111.2.802.1.1.100.1.1.13 integer32 read-write
A value indicating the Bridge Proposed VDP Keep Alive Timeout.
                 ieee8021BridgeEvbPhyPortTable 1.3.111.2.802.1.1.100.1.1.14 no-access
A table that contains .
                       ieee8021BridgeEvbPhyPortEntry 1.3.111.2.802.1.1.100.1.1.14.1 no-access
A list of objects containing EVB port type objects. Creation of an entry in this table will implicitly also create a corresponding entry in the ieee8021BridgeBasePortTable.
                           ieee8021BridgeEvbPhyPort 1.3.111.2.802.1.1.100.1.1.14.1.1 ieee8021bridgeportnumber no-access
The external port.
                           ieee8021BridgeEvbPhyPortMacAddress 1.3.111.2.802.1.1.100.1.1.14.1.2 macaddress read-only
TBD
                           ieee8021BridgeEvbPhyPortTypeCap 1.3.111.2.802.1.1.100.1.1.14.1.3 bits read-only
TBD Bits: 'customerVlanPort': 0, 'providerNetworkPort': 1, 'customerBackbonePort': 4, 'virtualInstancePort': 5, 'customerNetworkPort': 2, 'dBridgePort': 6, 'customerEdgePort': 3, 'serverEdgePort': 7.
                           ieee8021BridgeEvbPhyPortType 1.3.111.2.802.1.1.100.1.1.14.1.4 integer read-write
The port type for this portIndex. Enumeration: 'uplinkAccessPort': 2, 'customerVlanPort': 1.
                           ieee8021BridgeEvbPhyPortToComponentId 1.3.111.2.802.1.1.100.1.1.14.1.5 ieee8021pbbcomponentidentifierorzero read-write
The component ID that this EVB port belongs to.
                           ieee8021BridgeEvbPhyPortToInternalPort 1.3.111.2.802.1.1.100.1.1.14.1.6 ieee8021bridgeportnumberorzero read-write
The internal port number to which this externel/physical port maps to.
                 ieee8021BridgeEvbPortTable 1.3.111.2.802.1.1.100.1.1.15 no-access
A table that contains .
                       ieee8021BridgeEvbPortEntry 1.3.111.2.802.1.1.100.1.1.15.1 no-access
A list of objects containing EVB port type objects. Creation of an entry in this table will implicitly also create a corresponding entry in the ieee8021BridgeBasePortTable.
                           ieee8021BridgeEvbPortComponentId 1.3.111.2.802.1.1.100.1.1.15.1.1 ieee8021pbbcomponentidentifierorzero no-access
The component ID that this EVB port belongs to.
                           ieee8021BridgeEvbPort 1.3.111.2.802.1.1.100.1.1.15.1.2 ieee8021bridgeportnumber no-access
The port number of the port for which this entry contains EVB management information.
                           ieee8021BridgeEvbPortType 1.3.111.2.802.1.1.100.1.1.15.1.3 integer read-only
The port type for this portIndex. Enumeration: 'uplinkAccessPort': 3, 'sChannelAccessPort': 4, 'stationFacingBridgePort': 2, 'edgeRelayPort': 6, 'uplinkRelayPort': 5, 'cVlanBridgePort': 1.
                           ieee8021BridgeEvbPortRowStatus 1.3.111.2.802.1.1.100.1.1.15.1.4 rowstatus read-only
RowStatus for this table.
             ieee8021BridgeEvbVSIDBObjects 1.3.111.2.802.1.1.100.1.2
                 ieee8021BridgeEvbVSIDBTable 1.3.111.2.802.1.1.100.1.2.1 no-access
A table that contains database of the active Virtual Station Interfaces.
                     ieee8021BridgeEvbVSIDBEntry 1.3.111.2.802.1.1.100.1.2.1.1 no-access
A list of objects containing database of the active Virtual Station Interfaces.
                         ieee8021BridgeEvbVsiSvid 1.3.111.2.802.1.1.100.1.2.1.1.1 unsigned32 no-access
The Svid to identify the S-Channel interface.
                         ieee8021BridgeEvbVSIID 1.3.111.2.802.1.1.100.1.2.1.1.2 octet string no-access
This object specifies the VSIID that uniquely identifies the VSI in the DCN
                         ieee8021BridgeEvbVSIComponentID 1.3.111.2.802.1.1.100.1.2.1.1.3 ieee8021pbbcomponentidentifier read-only
TBD
                         ieee8021BridgeEvbVSIPortNumber 1.3.111.2.802.1.1.100.1.2.1.1.4 ieee8021bridgeportnumber read-only
TBD
                         ieee8021BridgeEvbVSITimeSinceCreate 1.3.111.2.802.1.1.100.1.2.1.1.5 timeinterval read-only
This object specifies the time since creation
                         ieee8021BridgeEvbVsiVdpOperCmd 1.3.111.2.802.1.1.100.1.2.1.1.6 integer read-only
This object identifies the type of TLV. Enumeration: 'preAssociateWithRsrcReservation': 2, 'associate': 3, 'deAssociate': 4, 'preAssociate': 1.
                         ieee8021BridgeEvbVsiOperRevert 1.3.111.2.802.1.1.100.1.2.1.1.7 truthvalue read-only
TBD
                         ieee8021BridgeEvbVsiOperHard 1.3.111.2.802.1.1.100.1.2.1.1.8 truthvalue read-only
TBD
                         ieee8021BridgeEvbVsiOperReason 1.3.111.2.802.1.1.100.1.2.1.1.9 bits read-only
This object indicates the outcome of a request. Bits: 'invalidFormat': 1, 'otherfailure': 3, 'insufficientResources': 2, 'success': 0.
                         ieee8021BridgeEvbVSIMgrID 1.3.111.2.802.1.1.100.1.2.1.1.10 octet string read-only
This object identifies the VSI Manager with a database that holds the detailed VSI type and or instance definitions.
                         ieee8021BridgeEvbVSIType 1.3.111.2.802.1.1.100.1.2.1.1.11 octet string read-only
The VTID is an integer value used to identify a pre-configured set of controls and attributes that are associated with a set of VSIs.
                         ieee8021BridgeEvbVSITypeVersion 1.3.111.2.802.1.1.100.1.2.1.1.12 octet string read-only
The VSI Type Version is an integer identifier designating the expected/desired VTID version. The VTID version allows a VSI Manager Database to contain multiple versions of a given VSI Type, allowing smooth migration to newer VSI types.
                         ieee8021BridgeEvbVSIMvFormat 1.3.111.2.802.1.1.100.1.2.1.1.13 integer read-only
This object specifies the MAC/VLAN format. basic - Basic MAC/VLAN format partial - Partial MAC/VLAN format vlanOnly - Vlan-only MAC/VLAN format Enumeration: 'partial': 1, 'vlanOnly': 2, 'basic': 0.
                         ieee8021BridgeEvbVSINumMACs 1.3.111.2.802.1.1.100.1.2.1.1.14 integer32 read-only
This object specifies the the number of MAC address/VLAN ID pairs contained in the repeated protion of the MAC/VLANs field in the VDP TLV.
                         ieee8021BridgeEvbVDPMachineState 1.3.111.2.802.1.1.100.1.2.1.1.15 integer read-only
This object specifies the VDP state machine. Enumeration: 'preAssociateWithRsrcReservation': 2, 'associate': 3, 'deAssociate': 4, 'preAssociate': 1.
                         ieee8021BridgeEvbVDPCommandsSucceeded 1.3.111.2.802.1.1.100.1.2.1.1.16 counter32 read-only
This object specifies the VDP number of successful commands since creation.
                         ieee8021BridgeEvbVDPCommandsFailed 1.3.111.2.802.1.1.100.1.2.1.1.17 counter32 read-only
This object specifies the VDP number of failed commands since creation
                         ieee8021BridgeEvbVDPCommandReverts 1.3.111.2.802.1.1.100.1.2.1.1.18 counter32 read-only
This object specifies the VDP command reverts since creation
                 ieee8021BridgeEvbVSIDBMacTable 1.3.111.2.802.1.1.100.1.2.2 no-access
A table that contains database of the active Virtual Station Interfaces.
                     ieee8021BridgeEvbVSIDBMacEntry 1.3.111.2.802.1.1.100.1.2.2.1 no-access
A list of objects containing database of the MAC/VLANs associated with Virtual Station Interfaces.
                         ieee8021BridgeEvbGroupID 1.3.111.2.802.1.1.100.1.2.2.1.1 unsigned32 no-access
Group ID
                         ieee8021BridgeEvbVSIMac 1.3.111.2.802.1.1.100.1.2.2.1.2 macaddress no-access
The mac-address part of the MAC/VLANs for a VSI.
                         ieee8021BridgeEvbVSIVlanId 1.3.111.2.802.1.1.100.1.2.2.1.3 vlanindex read-only
The Vlan ID part of the MAC/VLANs for a VSI.
             ieee8021BridgeEvbSChannelObjects 1.3.111.2.802.1.1.100.1.4
                 ieee8021BridgeEvbUAPConfigTable 1.3.111.2.802.1.1.100.1.4.1 no-access
A table that contains configuration parameters for UAP.
                     ieee8021BridgeEvbUAPConfigEntry 1.3.111.2.802.1.1.100.1.4.1.1 no-access
A list of objects containing information to configure the attributes for UAP.
                         ieee8021BridgeEvbUAPComponentId 1.3.111.2.802.1.1.100.1.4.1.1.1 ieee8021pbbcomponentidentifier read-only
The ComponentID of the port for the UAP.
                         ieee8021BridgeEvbUAPPort 1.3.111.2.802.1.1.100.1.4.1.1.2 ieee8021bridgeportnumber read-only
The port number of the port for the UAP.
                         ieee8021BridgeEvbUAPSchCdcpAdminEnable 1.3.111.2.802.1.1.100.1.4.1.1.3 integer read-only
Administrative staus of CDCP. Enumeration: 'enable': 1, 'disable': 2.
                         ieee8021BridgeEvbUAPSchAdminCDCPRole 1.3.111.2.802.1.1.100.1.4.1.1.4 integer read-only
The administratively configured value for the local port's role parameter. The value of AdminRole is not reflected in the S-channel TLV. The AdminRole may take the value S or B. S indicates the sender is unwilling to accept S-channels configuration (mode, # channels supported, channel index) from its neighbor and that the sender is willing to accept SVID assignments from the neighbor. Stations usually take the S role.B indicates the sender is willing to accept S-channels configuration (mode, # channels supported, channel index) from its neighbor and that the sender is willing do the best it can to fill the SVID assignments from the neighbor. Bridges usually take the B role. Enumeration: 'cdcpRoleS': 2, 'cdcpRoleB': 1.
                         ieee8021BridgeEvbUAPSchAdminCDCPChanCap 1.3.111.2.802.1.1.100.1.4.1.1.5 integer32 read-only
The administratively configured value for the Number of Channels supported parameter. This value is included as the ChnCap parameter in the S-channel TLV.
                         ieee8021BridgeEvbUAPSchOperCDCPChanCap 1.3.111.2.802.1.1.100.1.4.1.1.6 integer32 read-only
The operational value for the Number of Channels supported parameter. This value is included as the ChnCap parameter in the S-channel TLV.
                         ieee8021BridgeEvbUAPSchAdminCDCPSVIDPoolLow 1.3.111.2.802.1.1.100.1.4.1.1.7 vlanindex read-only
Determines the lowest S-VIDs available for assignment by CDCP.
                         ieee8021BridgeEvbUAPSchAdminCDCPSVIDPoolHigh 1.3.111.2.802.1.1.100.1.4.1.1.8 vlanindex read-only
Determines the highest S-VIDs available for assignment by CDCP.
                         ieee8021BridgeEvbUAPSchOperState 1.3.111.2.802.1.1.100.1.4.1.1.9 integer read-only
The current runnning state of CDCP. Enumeration: 'running': 1, 'notRunning': 2.
                         ieee8021BridgeEvbSchCdcpRemoteEnabled 1.3.111.2.802.1.1.100.1.4.1.1.10 integer read-only
CDCP state for the remote S-channel. Enumeration: 'enable': 1, 'disable': 2.
                         ieee8021BridgeEvbSchCdcpRemoteRole 1.3.111.2.802.1.1.100.1.4.1.1.11 integer read-only
The value for the remote port's role parameter. Enumeration: 'cdcpRoleS': 2, 'cdcpRoleB': 1.
                         ieee8021BridgeEvbUAPConfigRowStatus 1.3.111.2.802.1.1.100.1.4.1.1.12 rowstatus read-only
RowStatus for creating a UAP table entry.
                 ieee8021BridgeEvbCAPConfigTable 1.3.111.2.802.1.1.100.1.4.2 no-access
A table that contains configuration information for the S-Channel Access Ports (CAP).
                     ieee8021BridgeEvbCAPConfigEntry 1.3.111.2.802.1.1.100.1.4.2.1 no-access
A list of objects containing information for the S-Channel Access Ports (CAP)
                         ieee8021BridgeEvbCAPComponentId 1.3.111.2.802.1.1.100.1.4.2.1.1 ieee8021pbbcomponentidentifier read-only
Component ID for S-channel Access Port.
                         ieee8021BridgeEvbCAPPort 1.3.111.2.802.1.1.100.1.4.2.1.2 ieee8021bridgeportnumber read-only
Port number for the S-Channel Access Port.
                         ieee8021BridgeEvbCAPSChannelID 1.3.111.2.802.1.1.100.1.4.2.1.3 integer32 read-only
S-Channel ID (SCID) for this CAP.
                         ieee8021BridgeEvbCAPAssociateSBPCompID 1.3.111.2.802.1.1.100.1.4.2.1.6 ieee8021pbbcomponentidentifier read-write
Component ID of the Server Edge Port to be associated with the CAP.
                         ieee8021BridgeEvbCAPAssociateSBPPort 1.3.111.2.802.1.1.100.1.4.2.1.7 ieee8021bridgeportnumber read-write
Port number of the Server Edge Port to be associated with the CAP.
                         ieee8021BridgeEvbCAPLldpAdminEnables 1.3.111.2.802.1.1.100.1.4.2.1.8 bits read-only
To use manual or auto configuration for EVB LLDP TLV. In manual operation the system may exchange the EVB TLV however does not use the information supplied to set the operating parameters for RR, ECP and VDP.The default value for the ieee8021BridgeEvbSysEvbLldpEnables is LLDP on and manual off. Bits: 'autoEvbLLDPTLV': 1, 'evbTLVEnable': 0.
                         ieee8021BridgeEvbCAPLldpAdminCap 1.3.111.2.802.1.1.100.1.4.2.1.9 ieee8021bridgeevbtlvtc read-only
EVB current configured capabilities.
                         ieee8021BridgeEvbCAPLldpOperMode 1.3.111.2.802.1.1.100.1.4.2.1.10 ieee8021bridgeevbtlvtc read-only
EVB current operational capabilities.
                         ieee8021BridgeEvbCAPEcpAdminAckTimerInit 1.3.111.2.802.1.1.100.1.4.2.1.11 timeinterval read-only
The initial value used to initialize ackTimer (44.3.6.1).
                         ieee8021BridgeEvbCAPEcpOperAckTimerInit 1.3.111.2.802.1.1.100.1.4.2.1.12 timeinterval read-only
The initial value used to initialize ackTimer (44.3.6.1).
                         ieee8021BridgeEvbCAPEcpAdminMaxTries 1.3.111.2.802.1.1.100.1.4.2.1.13 unsigned32 read-only
This integer variable defines the maximum number of times that the ECP transmit state machine will retry a transmission if no ACK is received.
                         ieee8021BridgeEvbCAPEcpOperMaxRetries 1.3.111.2.802.1.1.100.1.4.2.1.14 unsigned32 read-only
This integer variable defines the maximum number of times that the ECP transmit state machine will retry a transmission if no ACK is received.
                         ieee8021BridgeEvbCAPEcpTxFrameCount 1.3.111.2.802.1.1.100.1.4.2.1.15 counter32 read-only
TBD.
                         ieee8021BridgeEvbCAPEcpTxRetryCount 1.3.111.2.802.1.1.100.1.4.2.1.16 counter32 read-only
TBD.
                         ieee8021BridgeEvbCAPEcpTxFailures 1.3.111.2.802.1.1.100.1.4.2.1.17 counter32 read-only
TBD.
                         ieee8021BridgeEvbCAPEcpRxFrameCount 1.3.111.2.802.1.1.100.1.4.2.1.18 counter32 read-only
TBD.
                         ieee8021BridgeEvbCAPVdpOperRsrcWaitDelay 1.3.111.2.802.1.1.100.1.4.2.1.19 timeinterval read-only
The value used to initialize the waitWhile timer (42.2.5.1) by the EVBCB VDP state machine when the state machine is waiting for a response.
                         ieee8021BridgeEvbCAPVdpOperRespWaitDelay 1.3.111.2.802.1.1.100.1.4.2.1.20 timeinterval read-only
The value used to initialize the waitWhile timer (42.2.5.1) by the station VDP state machine when the state machine is waiting for a response.
                         ieee8021BridgeEvbCAPVdpOperReinitKeepAlive 1.3.111.2.802.1.1.100.1.4.2.1.21 timeinterval read-only
The value used to initialize the waitWhile timer (42.2.5.1) by the station VDP state machine in order to determine when to transmit a keep alive message.
                         ieee8021BridgeEvbCAPVdpOperToutKeepAlive 1.3.111.2.802.1.1.100.1.4.2.1.22 timeinterval read-only
The value used to initialize the waitWhile timer (42.2.5.1) by the EVBCB VDP state machine n order to determine when to transmit a keep alive message.
                         ieee8021BridgeEvbCAPRowStatus 1.3.111.2.802.1.1.100.1.4.2.1.23 rowstatus read-only
RowStatus to create/destroy this table.
         ieee8021BridgeEvbConformance 1.3.111.2.802.1.1.100.2
             ieee8021BridgeEvbGroups 1.3.111.2.802.1.1.100.2.1
                 ieee8021BridgeEvbConfigGroup 1.3.111.2.802.1.1.100.2.1.1
The collection of objects used to represent a EVB management objects.
                 ieee8021BridgeEvbPhyPortGroup 1.3.111.2.802.1.1.100.2.1.2
The collection of objects used to represent external ports.
                 ieee8021BridgeEvbPortGroup 1.3.111.2.802.1.1.100.2.1.3
The collection of objects used to represent a EVB management objects.
                 ieee8021BridgeEvbVSIDBGroup 1.3.111.2.802.1.1.100.2.1.4
The collection of objects used to represent a EVB VSI DB table.
                 ieee8021BridgeEvbUAPGroup 1.3.111.2.802.1.1.100.2.1.5
The collection of objects used to represent a EVB UAP table.
                 ieee8021BridgeEvbCAPConfigGroup 1.3.111.2.802.1.1.100.2.1.6
The collection of objects used to represent a EVB CAP management objects.
                 ieee8021BridgeEvbbCAPConfigGroup 1.3.111.2.802.1.1.100.2.1.7
The collection of objects used to represent a EVBB CAP management objects.
                 ieee8021BridgeEvbsCAPConfigGroup 1.3.111.2.802.1.1.100.2.1.8
The collection of objects used to represent a EVBS CAP management objects.
             ieee8021BridgeEvbCompliances 1.3.111.2.802.1.1.100.2.2
                 ieee8021BridgeEvbbCompliance 1.3.111.2.802.1.1.100.2.2.1
The compliance statement for devices supporting EVBB as defined in IEEE 802.1Qbg.
                 ieee8021BridgeEvbsCompliance 1.3.111.2.802.1.1.100.2.2.2
The compliance statement for devices supporting EVBS as defined in IEEE 802.1Qbg.