ICOTERA-I6800-SERIES: View SNMP OID List / Download MIB

VENDOR: KJAERULFF 1


 Home MIB: ICOTERA-I6800-SERIES
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 icotera 1.3.6.1.4.1.29865
The Icotera management information base SMI definitions
             ictIGW4k 1.3.6.1.4.1.29865.12
Device related SNMP options
                   ictMgmt 1.3.6.1.4.1.29865.12.2
                       ictMgmtMib 1.3.6.1.4.1.29865.12.2.1
The MIB which allows managing the CPE
                           ictFwUpg 1.3.6.1.4.1.29865.12.2.1.1
The MIB of firmware upgrade
                               upgUrl 1.3.6.1.4.1.29865.12.2.1.1.1 octet string read-write
Path to file with firmware.
                               upgExecute 1.3.6.1.4.1.29865.12.2.1.1.2 integer read-write
MIB responsible for trigerring firmware upgrade. Enumeration: 'notUpgrading': 0, 'validatingUpgrade-CheckErrorCodeIfFailed': 2, 'startUpgrade': 1, 'someErrorOccured': 3.
                               upgStatus 1.3.6.1.4.1.29865.12.2.1.1.3 octet string read-only
MIB show upgrade status.
                           ictCfgUpdate 1.3.6.1.4.1.29865.12.2.1.2
The MIB of configuration update
                               cfgTftpPath 1.3.6.1.4.1.29865.12.2.1.2.1 octet string read-write
Path to cofiguration file stored at TFTP server.
                               cfgExecute 1.3.6.1.4.1.29865.12.2.1.2.2 integer read-write
MIB responsible for trigerring config upload at CPE. Enumeration: 'someErrorOccured': 3, 'notUpdating': 0, 'startUpdate': 1.
                               cfgStatus 1.3.6.1.4.1.29865.12.2.1.2.3 octet string read-only
MIB show configuration upgrade status.
                           ictReboot 1.3.6.1.4.1.29865.12.2.1.3
The MIB responsible for CPE reboot
                               performCpeReboot 1.3.6.1.4.1.29865.12.2.1.3.2 integer read-write
MIB responsible for trigerring CPE reboot. Enumeration: 'noActionRequested': 0, 'someErrorOccured': 3, 'makeReboot': 1.
                   ictServices 1.3.6.1.4.1.29865.12.3
                       ictCatv 1.3.6.1.4.1.29865.12.3.1
The MIB module for managing Icotera services
                           ictCatvMib 1.3.6.1.4.1.29865.12.3.1.1
The MIB module for managing Icotera services
                               catvModuleAdminStatus 1.3.6.1.4.1.29865.12.3.1.1.1 integer read-only
The administrative status of the module, this can be enabled(1) or disabled(0). Enumeration: 'disabled': 0, 'enabled': 1.
                               catvModuleFilter 1.3.6.1.4.1.29865.12.3.1.1.2 integer read-only
Package filter selected for catv module Enumeration: 'pkg4': 4, 'pkg1': 1, 'pkg2': 2, 'none': 0, 'pkg3': 3.
                               catvModuleRflevel 1.3.6.1.4.1.29865.12.3.1.1.3 integer read-only
RF signal amplification on CATV output Enumeration: 'high': 3, 'auto': 0, 'medium': 2, 'low': 1.
                               catvModuleLowSignal 1.3.6.1.4.1.29865.12.3.1.1.4 integer read-only
Low signal level of catv led
                               catvModuleSignalDetected 1.3.6.1.4.1.29865.12.3.1.1.5 integer read-only
Tells whether CATV signal is detected: yes(1) - detected, no(0) - not detected. Enumeration: 'yes': 1, 'no': 0.
                               catvModulePowerLevel 1.3.6.1.4.1.29865.12.3.1.1.6 integer read-only
Current CATV power level. It can have one of the following values: - any integer between -1299 and 199 when the power level is higher than -13.00 and lower than 2.00, which is the power level in dBm multiplied by 100. - a value of -2147483648 when the power level is lower than -13 dBm - a value of 2147483647 when the power level is higher than 2 dBm.
                               catvModuleRfOutputLevel 1.3.6.1.4.1.29865.12.3.1.1.7 integer read-only
Parameter is supported by special CATV solution. No data will be provided if CPE is not compatible. Calculated RF output value which should be expected. - Expected value is presented in dBuV multiplied by 100. - if value of 0 is received, either CATV fiber is not connected or CATV is turned off.
                               catvModuleOmi 1.3.6.1.4.1.29865.12.3.1.1.8 integer read-only
Parameter is supported by special CATV solution. No data will be provided if CPE is not compatible. Currently OMI value set at CPE.
                       ictVoip 1.3.6.1.4.1.29865.12.3.2
The MIB module for checking VoIP service
                           ictVoipMib 1.3.6.1.4.1.29865.12.3.2.1
The MIB module for checking VoIP service status
                               voipFXSport1 1.3.6.1.4.1.29865.12.3.2.1.1 octet string read-only
The administrative status of the FXS port 1
                               voipFXSport2 1.3.6.1.4.1.29865.12.3.2.1.2 octet string read-only
The administrative status of the FXS port 2
                   ictDuplex 1.3.6.1.4.1.29865.12.4
                       ictDuplexMib 1.3.6.1.4.1.29865.12.4.15
Initial release.
                             duplexConfig 1.3.6.1.4.1.29865.12.4.15.1
                                 ifDuplexTable 1.3.6.1.4.1.29865.12.4.15.1.1 no-access
A table containing interface duplex status.
                                     ifDuplexEntry 1.3.6.1.4.1.29865.12.4.15.1.1.1 no-access
Status for a specific interface using ethernet-like medium.
                                         ifDuplexIndex 1.3.6.1.4.1.29865.12.4.15.1.1.1.1 interfaceindex read-only
An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                         ifDuplexStatus 1.3.6.1.4.1.29865.12.4.15.1.1.1.2 integer read-only
The current duplex mode of operation of the interface. 'unknown' indicates that the current duplex mode could not be determined. Enumeration: 'unknown': 1, 'fullDuplex': 3, 'halfDuplex': 2.
                   ictReset 1.3.6.1.4.1.29865.12.5
                       ictFacRst 1.3.6.1.4.1.29865.12.5.1
The MIB parent for CPE reset
                           ictFacRstMib 1.3.6.1.4.1.29865.12.5.1.1
The MIB which makes Factory Reset of CPE
                               performFactoryReset 1.3.6.1.4.1.29865.12.5.1.1.1 integer read-write
Status of FactoryReset feature. Enumeration: 'noActionRequested': 0, 'makeFactoryreset': 1, 'someErrorOccured': 3.
                   ictDhcp 1.3.6.1.4.1.29865.12.6
                       ictDHCPsrv 1.3.6.1.4.1.29865.12.6.1 no-access
Table of DHCPd leases.
                           ictDHCPsrvLeases 1.3.6.1.4.1.29865.12.6.1.1 no-access
An entry in the table, containing information about lease.
                               ictDHCPsrvIndex 1.3.6.1.4.1.29865.12.6.1.1.1 integer read-only
A unique value for LEASE index.
                               ictMacAddress 1.3.6.1.4.1.29865.12.6.1.1.2 macaddress read-only
MAC address of Lease.
                               ictExpire 1.3.6.1.4.1.29865.12.6.1.1.3 integer read-only
Lease time until Expire
                               ictIPaddress 1.3.6.1.4.1.29865.12.6.1.1.4 displaystring read-only
IP address learned from host.
                               ictHostName 1.3.6.1.4.1.29865.12.6.1.1.5 displaystring read-only
Hostname.