IBMNETU-MIB: View SNMP OID List / Download MIB

VENDOR: IBM


 Home MIB: IBMNETU-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ibm 1.3.6.1.4.1.2
     ibmProd 1.3.6.1.4.1.2.6
         ibmnetu 1.3.6.1.4.1.2.6.150
                 ibmnetuadmin 1.3.6.1.4.1.2.6.150.1
                     ibmnetuadminproducts 1.3.6.1.4.1.2.6.150.1.1
                         ibmnetumod400 1.3.6.1.4.1.2.6.150.1.1.1
                     ibmnetuadminOID 1.3.6.1.4.1.2.6.150.1.2
                         ibmnetuEnetChipSet 1.3.6.1.4.1.2.6.150.1.2.1
                             enetChipSetToshiba 1.3.6.1.4.1.2.6.150.1.2.1.1
                             enetChipSetAMD 1.3.6.1.4.1.2.6.150.1.2.1.2
                     ibmnetuadminDebug 1.3.6.1.4.1.2.6.150.1.3
                 ibmnetusystem 1.3.6.1.4.1.2.6.150.2
                     ibmnetusystemInfo 1.3.6.1.4.1.2.6.150.2.1
                     ibmnetucfgInfo 1.3.6.1.4.1.2.6.150.2.2
                 ibmnetuhardware 1.3.6.1.4.1.2.6.150.3
                     ibmnetuhardwareGeneral 1.3.6.1.4.1.2.6.150.3.1
                         ibmnetuPCIAdapTable 1.3.6.1.4.1.2.6.150.3.1.1 no-access
A table of information about PCI adapters in this box.
                             ibmnetuPCIAdapEntry 1.3.6.1.4.1.2.6.150.3.1.1.1 no-access
An entry containing objects to describe the adapter in a given slot.
                                 ibmnetuPCIAdapSlotNum 1.3.6.1.4.1.2.6.150.3.1.1.1.1 integer read-only
The number identifying a slot location where an adapter can be inserted.
                                 ibmnetuPCIAdapType 1.3.6.1.4.1.2.6.150.3.1.1.1.2 integer read-only
The type of adapter that is inserted into this slot. If no adapter is present, the variable will take the value not-present(2). The enumerations marked reserved# are saved for future enhancements. Enumeration: 'serial-x21-lic291': 13, 'reserved6': 19, 'serial-hssi-lic289': 16, 'serial-v35-lic290': 12, 'atm-smf-lic295': 5, 'unknown': 1, 'fddi-lic286': 17, 'ethernet-fast-lic288': 15, 'reserved5': 18, 'ethernet-lic281': 14, 'parallel-channel-lic299': 20, 'token-ring-lic280': 7, 'not-present': 2, 'serial-rs232-lic282': 11, 'escon-lic287': 8, 'reserved4': 10, 'atm-mmf-lic294': 3, 'reserved1': 4, 'reserved3': 9, 'reserved2': 6.
                                 ibmnetuPCIAdapOperStatus 1.3.6.1.4.1.2.6.150.3.1.1.1.3 integer read-only
The operational status of this PCI adapter. unknown (1) : If there was problem determining the operational status of the adapter. not-configured (2) : If the adapter inserted in the slot is recognized but no router configuration exists. not-present (3) : If no adapter is currently inserted. does-not-apply (4) : If this adapter does not contain an operational state. enable-pending (5) : If commands have been issued to enable the adapter but have not been completed. enabled (6) : If commands have been successfully issued to enable the adapter. disable-pending (7) : If commands have been issued to disable the adapter but have not been completed. disabled (8) : If commands have been successfully issued to disable the adapter. not-initialized (9) : If the adapter has not completed its initialization. unknown-device (10) : If the adapter inserted in the slot can not be recognized. hardware-error (11) : If the adapter can not be used nor made ready to be used. not-powered (12) : If the adapter has had a problem obtaining power from its slot. diagnostics (13) : If the adapter is currently undergoing diagnostics. wrs-available (14) : If the adapter is currently configured and available for WAN restoral. mis-configured (15) : If the adapter is inserted in the slot but the router configuration is of a different type. Enumeration: 'mis-configured': 15, 'not-initialized': 9, 'unknown': 1, 'diagnostics': 13, 'enabled': 6, 'enable-pending': 5, 'wrs-available': 14, 'disabled': 8, 'not-present': 3, 'not-powered': 12, 'disable-pending': 7, 'not-configured': 2, 'hardware-error': 11, 'does-not-apply': 4, 'unknown-device': 10.
                         ibmnetuGraphicTable 1.3.6.1.4.1.2.6.150.3.1.2 no-access
A table of information mapping a slot and port to an interface table ifIndex. An entry exists in this table only if the ifConnectorPresent object is true
                             ibmnetuGraphicEntry 1.3.6.1.4.1.2.6.150.3.1.2.1 no-access
An entry mapping slot and port to an interface table ifIndex.
                                 ibmnetuGraphicSlotNum 1.3.6.1.4.1.2.6.150.3.1.2.1.1 integer read-only
The number identifying a slot location where an adapter can be inserted.
                                 ibmnetuGraphicPortNum 1.3.6.1.4.1.2.6.150.3.1.2.1.2 integer read-only
The number identifying a port on a given adapter. A port implies a physical connector is associated with it.
                                 ibmnetuGraphicifIndex 1.3.6.1.4.1.2.6.150.3.1.2.1.3 integer read-only
The ifIndex of the interface table entry associated with this port on an adapter. By definition, the ifEntry has ifConnectorPresent = true.
                     ibmnetuhardware400Specific 1.3.6.1.4.1.2.6.150.3.2
                 ibmneturouting 1.3.6.1.4.1.2.6.150.4
                 ibmnetuswitching 1.3.6.1.4.1.2.6.150.5