IBM-LES-LECS-MIB: View SNMP OID List / Download MIB

VENDOR: IBM


 Home MIB: IBM-LES-LECS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, NWAYSMSS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ibmLesLecsMIB 1.3.6.1.4.1.2.6.118.1.2.1.2
     ibmLesLecsConfGroup 1.3.6.1.4.1.2.6.118.1.2.1.2.1
         lesLecsConfTable 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1 no-access
This table contains the the configuration for LES-LECS interfaces.
             lesLecsConfEntry 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1 no-access
Each entry in this table contains configuration parameters for the LES-LECS operation for an individual ATM physical interface. Object lesLecsRowStatus is required during row creation and deletion.
                 lesLecsOperStatus 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.1 integer read-only
The operational state of LES/LECS on this entry. Other defines the transition states between up and down. Enumeration: 'down': 3, 'other': 1, 'up': 2.
                 lesLecsAdminStatus 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.2 integer read-write
The administrative state of the LES/LECS on this entry. Enumeration: 'down': 3, 'up': 2.
                 lesLecsAtmDevNum 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.3 integer read-only
Identifies ATM device to be used to interface with LECS.
                 lesLecsAtmDevLineSpeed 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.4 integer32 read-only
Line Speed of LECS ATM Device. This should not exposed to the user.
                 lesLecsUseBurnedInEsi 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.5 truthvalue read-write
Specifies whether a MAC Address burned into the ATM device should be used as the End System Identifier component of local ATM Address used when calling LECS.
                 lesLecsConfiguredEsi 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.6 atmprivateaddresi read-write
Locally Administered End System Identifier that is to be used as the ESI component of the local ATM Address used when calling the LECS.
                 lesLecsConfiguredSelector 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.7 atmselector read-write
Specifies value to be used as Selector field component of local ATM Address used when calling the LECS.
                 configDirectVccType 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.8 atmvcctraffictype read-write
Specifies type of traffic characteristics to be associated with Configuration Direct VCC to LECS. Bandwidth is not reserved for best effort traffic.
                 configDirectPcr 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9 bandwidth read-write
Specifies the Peak Cell Rate (PCR) Traffic Parameter for the Configuration Direct VCC to the LECS. The specified rate is used for both forward and backward directions. When a best effort connection is rejected due to the PCR, the call may be automatically retried with a lower PCR. Retries are performed under the following conditions: if (rejected PCR > 100 Mbps) retry with PCR = 100 Mbps else if (25 < rejected PCR <= 100 Mbps) retry with PCR = 25 Mbps
                 configDirectScr 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.10 bandwidth read-write
Specifies the Sustained Cell Rate (SCR) Traffic Parameter for the Configuration Direct VCC to the LECS. The specified rate is used for both forward and backward directions. If the SCR equals the PCR specified in LECS-INTF-7, the call is signalled with PCR only. If SCR is signalled, the Maximum Burst Size traffic parameter is set to accomodate the maximum control frame size of 1516 bytes.
                 lesLecsConfRowStatus 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.11 rowstatus read-write
This object is used to create or delete entries in the lesLecsConfTable.
     ibmLesLecsMIBConformance 1.3.6.1.4.1.2.6.118.1.2.1.2.2
         ibmLesLecsMIBGroups 1.3.6.1.4.1.2.6.118.1.2.1.2.2.1
             ibmLesLecsCConfGroup 1.3.6.1.4.1.2.6.118.1.2.1.2.2.1.1
         ibmLesLecsMIBCompliances 1.3.6.1.4.1.2.6.118.1.2.1.2.2.2
             ibmLesLecsMIBCompliance 1.3.6.1.4.1.2.6.118.1.2.1.2.2.2.1