IB-SMA-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: IB-SMA-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ibSmaMIB 1.3.6.1.3.117.3
Copyright (C) The Internet Society (2005). The initial version of this MIB module was published in RFC XXXX; for full legal notices see the RFC itself. Supplementary information may be available on http://www.ietf.org/copyrights/ianamib.html. This module contains managed object definitions for the Subnet Management Agent instrumentation for an InfiniBand Subnet Management Agent (SMA).
     ibSmaObjects 1.3.6.1.3.117.3.1
         ibSmaNodeInfo 1.3.6.1.3.117.3.1.1
             ibSmaNodeString 1.3.6.1.3.117.3.1.1.1 snmpadminstring read-only
The node description. This is the Node description string from the NodeDescription attribute. The contents of the NodeDescription attribute is the same for all ports on a node.
             ibSmaNodeBaseVersion 1.3.6.1.3.117.3.1.1.2 unsigned32 read-only
The supported Management Datagram (MAD) base version. This value indicates that the node supports up to and including this version. This value is the same for all ports on a node. (NOTE: for InfiniBand Release 1 this value should be set to 1.)
             ibSmaNodeClassVersion 1.3.6.1.3.117.3.1.1.3 unsigned32 read-only
The supported Subnet Management Class (SMP) version. This value indicates that the node supports up to and including this version. This value is the same for all ports on a node. (NOTE: for InfiniBand Release 1 this value should be set to 1.)
             ibSmaNodeType 1.3.6.1.3.117.3.1.1.4 integer read-only
Type of IBA device this SMA is supporting. InfiniBand types are 1: Channel Adapter 2: Switch 3: Router 0,4-255: reserved Enumeration: 'channelAdapter': 1, 'router': 3, 'switch': 2, 'reserved': 4.
             ibSmaNodeNumPorts 1.3.6.1.3.117.3.1.1.5 unsigned32 read-only
The number of physical InfiniBand ports on this node.
             ibSmaSystemImageGuid 1.3.6.1.3.117.3.1.1.6 ibguid read-only
The GUID of this node that associates this node with other nodes in the same administrative domain. These nodes are controlled by common supervisory code. This object provides a way for system software to indicate the availability of multiple paths to the same destination via multiple nodes. If this value is 0, there is no association. This object may be equal to the ibSmaNodeGuid of one of the associated nodes if that node is not field-replaceable.
             ibSmaNodeGuid 1.3.6.1.3.117.3.1.1.7 ibguid read-only
The GUID of this node. The node can be a Host Channel Adpater (HCA), Terminal Channel Adapter (TCA), switch, or router. All ports on the same node shall report the same NodeGUID value. This provides a means for uniquely identifying a node within a subnet and helps to determine the co-location of the ports.
             ibSmaNodePortGuid 1.3.6.1.3.117.3.1.1.8 ibguid read-only
The node port GUID. One port within a node can return the NodeGUID as its PortGUID if the port is an integral part of the node and is not field-replaceable.
             ibSmaNodePartitionTableNum 1.3.6.1.3.117.3.1.1.9 unsigned32 read-only
Number of entries in the Partition Table for CA, router, and the switch management port. This is at a minimum set to 1 for all nodes including switches. This value shall be the same for all ports on a node.
             ibSmaNodeDeviceId 1.3.6.1.3.117.3.1.1.10 octet string read-only
Device ID information as assigned by the device manufacturer. This value shall be the same for all ports on a node.
             ibSmaNodeRevision 1.3.6.1.3.117.3.1.1.11 octet string read-only
Manufacturer assigned device revision. This value shall be the same for all ports on a node.
             ibSmaNodeLocalPortNumOrZero 1.3.6.1.3.117.3.1.1.12 unsigned32 read-only
The number of the IBA port which received this SNMP request. If the port is unknown a 0 is returned.
             ibSmaNodeVendorId 1.3.6.1.3.117.3.1.1.13 octet string read-only
IEEE specified device vendor identifier. This value shall be the same for all ports on a node.
             ibSmaNodeLid 1.3.6.1.3.117.3.1.1.14 unsigned32 no-access
Local Identifier value. Used for notification var bind list object. Retrieved from InfiniBand traps 128, 129, 130, 131, 144, 145, 256, 257, 258, and 259.
             ibSmaNodePortNum 1.3.6.1.3.117.3.1.1.15 ibdataport no-access
Port number. Used for notification var bind list object. Retrieved from InfiniBand traps 129, 130, 131, and 259.
             ibSmaNodeMethod 1.3.6.1.3.117.3.1.1.16 unsigned32 no-access
Method. Used for notification var bind list object. Retrieved from InfiniBand trap 256.
             ibSmaNodeAttributeId 1.3.6.1.3.117.3.1.1.17 unsigned32 no-access
Attribute ID. Used for notification var bind list object. Retrieved from InfiniBand trap 256.
             ibSmaNodeAttributeModifier 1.3.6.1.3.117.3.1.1.18 unsigned32 no-access
Attribute Modifier. Used for notification var bind list object. Retrieved from InfiniBand trap 256.
             ibSmaNodeKey 1.3.6.1.3.117.3.1.1.19 octet string no-access
M_Key, Q_Key or P_Key. Used for notification var bind list object. Retrieved from InfiniBand traps 256, 257, 258, and 259. Note: If it is a P_Key, the 16 most significant bits of the field shall be set to 0 and the least significant bits of the field will be set to the P_Key.
             ibSmaNodeLid2 1.3.6.1.3.117.3.1.1.20 unsigned32 no-access
To Local Identifier (LID). Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259.
             ibSmaNodeServiceLevel 1.3.6.1.3.117.3.1.1.21 unsigned32 no-access
Service Level. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259.
             ibSmaNodeQueuePair1 1.3.6.1.3.117.3.1.1.22 unsigned32 no-access
Queue Pair (QP) 1. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259.
             ibSmaNodeQueuePair2 1.3.6.1.3.117.3.1.1.23 unsigned32 no-access
Queue Pair (QP) 2. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259.
             ibSmaNodeGid1 1.3.6.1.3.117.3.1.1.24 octet string no-access
Global Identifier 1. Used for notification var bind list object. Retrieved from InfiniBand traps 64, 65, 66, 67, 257, 258, and 259. Note: If no Global Routing Header (GRH) is present in the offending packet, this value will be all zeros.
             ibSmaNodeGid2 1.3.6.1.3.117.3.1.1.25 octet string no-access
Global Identifier 2. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 258. Note: If no GRH is present in the offending packet, this value will be all zeros.
             ibSmaNodeCapMask 1.3.6.1.3.117.3.1.1.26 octet string no-access
Contents of Capability Mask. Retrieved from InfiniBand trap 144.
             ibSmaNodeSwitchLid 1.3.6.1.3.117.3.1.1.27 unsigned32 no-access
The switch Local Identifier (LID). Used for notification var bind list object. Retrieved from InfiniBand traps 259.
             ibSmaNodeDataValid 1.3.6.1.3.117.3.1.1.28 bits no-access
Data valid field retrieved from InfiniBand trap 259. It is a bit mask. If the bit is set, the field is valid. bit 0: LIDADDR1 bit 1: LIDADDR2 bit 2: PKEY bit 3: SL bit 4: QP1 bit 5: QP2 bit 6: GIDADDR1 bit 7: GIDADDR2 bit 8-15: reserved (0). Bits: 'pkey': 2, 'gidaddr2': 7, 'gidaddr1': 6, 'sl': 3, 'qp2': 5, 'qp1': 4, 'lidaddr2': 1, 'lidaddr1': 0.
         ibSmaSwitchInfo 1.3.6.1.3.117.3.1.2
             ibSmaSwLinearFdbTableNum 1.3.6.1.3.117.3.1.2.1 unsigned32 read-only
Number of entries in the Linear Forwarding Data Base. This is the number of entries supported in the Linear Unicast Forwarding Table (starting at LID=0x0000 and going up). The InfiniBand SwitchInfo component is called LinearFDBCap. When the count is 0, this indicates that there is no Linear Forwarding Database present.
             ibSmaSwRandomFdbTableNum 1.3.6.1.3.117.3.1.2.2 unsigned32 read-only
Number of entries in the Random Forwarding Data Base. This is the number of entries supported in the Random Unicast Forwarding Table. The InfiniBand SwitchInfo component is called RandomFDBCap. When the count is 0, this indicates that there is no Random Forwarding Database present.
             ibSmaSwMulticastFdbTableNum 1.3.6.1.3.117.3.1.2.3 unsigned32 read-only
Number of entries in the Multicast Forwarding Data Base. This is the number of entries supported in the Multicast Forwarding Table (starting at LID=0xC000 and going up). The InfiniBand SwitchInfo component is called MulticastFDBCap.
             ibSmaSwLinearFdbTop 1.3.6.1.3.117.3.1.2.4 unsigned32 read-only
Indicates the top of the linear forwarding database. Packets received with unicast DLIDs greater than this value are discarded by the switch. A valid LinearFdbTop is less than LinearFdbCap. This component applies only to switches that implement linear forwarding tables and is ignored by switches that implement random forwarding tables. For the latter cases a 0 is returned.
             ibSmaSwDefaultPort 1.3.6.1.3.117.3.1.2.5 unsigned32 read-only
Default forwarding port for unicast packets from the other ports whose DLID does not exist in the random forwarding table. If the port number is unknown, a 0 is returned.
             ibSmaSwDefMcastPriPort 1.3.6.1.3.117.3.1.2.6 unsigned32 read-only
Default forwarding port for multicast packets from the other ports whose DLID does not exist in the forwarding table. If port number is unknown, a 0 is returned.
             ibSmaSwDefMcastNotPriPort 1.3.6.1.3.117.3.1.2.7 unsigned32 read-only
Forward to this port all the multicast packets from the Default Primary port whose DLID does not exist in the forwarding table. If it is unknown, a 0 is returned.
             ibSmaSwLifeTimeValue 1.3.6.1.3.117.3.1.2.8 unsigned32 read-only
Reports the time a packet can live in the switch. This Lifetime Value (LV) is used as a parameter to calculate Switch Lifetime Limit (SLL) value. To calculate a valid SLL, the LV must be between 0 and 19, inclusive. If the LV value is greater than 19, the SLL is to be interpreted as infinite.
             ibSmaSwPortStateChange 1.3.6.1.3.117.3.1.2.9 truthvalue read-only
This object is set to true(1) whenever the PortState component makes any of the following state changes in the link finite state machine (FSM): Down --> Initialize, Initialize --> Down, Armed --> Down, or Active --> Down
             ibSmaSwLidsPerPort 1.3.6.1.3.117.3.1.2.10 unsigned32 read-only
Specifies the number of LID/Link Mask Control (LMC) combinations that may be assigned to a given external port for switches that support the Random Forwarding table.
             ibSmaSwPartitionEnforceNum 1.3.6.1.3.117.3.1.2.11 unsigned32 read-only
Specifies the number of entries in the partition enforcement table per physical IBA port. The 0 value indicates that partition enforcement is not supported by the switch.
             ibSmaSwInboundEnforceCap 1.3.6.1.3.117.3.1.2.12 truthvalue read-only
Flag that indicates whether the switch is capable of partition enforcement on received packets.
             ibSmaSwOutboundEnforceCap 1.3.6.1.3.117.3.1.2.13 truthvalue read-only
Flag that indicates whether the switch is capable of partition enforcement on transmitted packets.
             ibSmaSwFilterRawPktInputCap 1.3.6.1.3.117.3.1.2.14 truthvalue read-only
Flag to indicate whether the switch is capable of raw packet enforcement on received packets.
             ibSmaSwFilterRawPktOutputCap 1.3.6.1.3.117.3.1.2.15 truthvalue read-only
Flag to indicate whether the switch is capable of raw packet enforcement on transmitted packets.
             ibSmaSwEnhancedPort0 1.3.6.1.3.117.3.1.2.16 truthvalue read-only
Flag to indicate whether switch port 0 supports enhanced functions (TCA port). If false, switch port 0 is a base switch port 0.
         ibSmaGuidInfo 1.3.6.1.3.117.3.1.3
             ibSmaGuidInfoTable 1.3.6.1.3.117.3.1.3.1 no-access
A table containing SMA GUID information.
                 ibSmaGuidInfoEntry 1.3.6.1.3.117.3.1.3.1.1 no-access
A conceptual row of the ibSmaGuidInfoTable containing information about a particular GUID entry.
                     ibSmaGuidPortIndex 1.3.6.1.3.117.3.1.3.1.1.1 ibdataport no-access
Index that identifies IB port associated with this GUID table.
                     ibSmaGuidIndex 1.3.6.1.3.117.3.1.3.1.1.2 unsigned32 no-access
Index that identifies the GUID entry for this port. For any IB port there can be multiple 64 bit GUIDs assigned. The maximum number is implementation dependent (up to 255). If the port does not have a GUID assigned to it, the row will have 1 entry with a ibSmaGuidVal value of zeroes.
                     ibSmaGuidVal 1.3.6.1.3.117.3.1.3.1.1.3 ibguid read-only
A Global Unique Identifier (GUID) for this port entity.
         ibSmaMgmtPortInfo 1.3.6.1.3.117.3.1.4
             ibSmaPortMKey 1.3.6.1.3.117.3.1.4.1 octet string read-only
The 8-byte management key that is kept locally for the management port. If the value is 0's, no authentication is done.
             ibSmaPortGidPrefix 1.3.6.1.3.117.3.1.4.2 octet string read-only
GID prefix for this port.
             ibSmaPortLid 1.3.6.1.3.117.3.1.4.3 unsigned32 read-only
The base LID of this port.
             ibSmaPortMasterSmLid 1.3.6.1.3.117.3.1.4.4 unsigned32 read-only
The LID of the master SM that is managing this port.
             ibSmaPortIsSubnetManager 1.3.6.1.3.117.3.1.4.5 truthvalue read-only
Capability flag for this node: Is Subnet Manager?
             ibSmaPortIsNoticeSupported 1.3.6.1.3.117.3.1.4.6 truthvalue read-only
Capability flag for this node: Are Notices Supported?
             ibSmaPortIsTrapSupported 1.3.6.1.3.117.3.1.4.7 truthvalue read-only
Capability flag for this node: Are IBA Traps Supported?
             ibSmaPortIsAutoMigrateSupported 1.3.6.1.3.117.3.1.4.8 truthvalue read-only
Capability flag for this node: Is Automatic Migration Supported?
             ibSmaPortIsSlMappingSupported 1.3.6.1.3.117.3.1.4.9 truthvalue read-only
Capability flag for this node: Is SL Mapping Supported?
             ibSmaPortIsMKeyNvram 1.3.6.1.3.117.3.1.4.10 truthvalue read-only
Capability flag for this node: Is M_Key in NVRAM?
             ibSmaPortIsPKeyNvram 1.3.6.1.3.117.3.1.4.11 truthvalue read-only
Capability flag for this node: Is P_Key in NVRAM?
             ibSmaPortIsLedInfoSupported 1.3.6.1.3.117.3.1.4.12 truthvalue read-only
Capability flag for this node: Is LED Information Supported?
             ibSmaPortIsSmDisabled 1.3.6.1.3.117.3.1.4.13 truthvalue read-only
Capability flag for this node: Is Subnet Manager Disabled?
             ibSmaPortIsSysImgGuidSupported 1.3.6.1.3.117.3.1.4.14 truthvalue read-only
Capability flag for this node: Is System Image GUID Supported?
             ibSmaPortIsPKeyExtPortTrapSup 1.3.6.1.3.117.3.1.4.15 truthvalue read-only
Capability flag for this node: Is P_Key Switch External Port Trap supported?
             ibSmaPortIsCommManageSupported 1.3.6.1.3.117.3.1.4.16 truthvalue read-only
Capability flag for this node: Is Communication Management Supported?
             ibSmaPortIsSnmpTunnelSupported 1.3.6.1.3.117.3.1.4.17 truthvalue read-only
Capability flag for this node: Is SNMP Tunneling Supported?
             ibSmaPortIsReinitSupported 1.3.6.1.3.117.3.1.4.18 truthvalue read-only
Capability flag for this node: Is Reinitialization Supported?
             ibSmaPortIsDevManageSupported 1.3.6.1.3.117.3.1.4.19 truthvalue read-only
Capability flag for this node: Is Device Management Supported?
             ibSmaPortIsVendorClassSupported 1.3.6.1.3.117.3.1.4.20 truthvalue read-only
Capability flag for this node: Is Vendor Class Supported?
             ibSmaPortIsDrNoticeSupported 1.3.6.1.3.117.3.1.4.21 truthvalue read-only
Capability flag for this node: Is DR Notice Supported?
             ibSmaPortIsCapMaskNoticSupported 1.3.6.1.3.117.3.1.4.22 truthvalue read-only
Capability flag for this node: Is Capability Mask Notice Supported?
             ibSmaPortIsBootMgmtSupported 1.3.6.1.3.117.3.1.4.23 truthvalue read-only
Capability flag for this node: Is Boot Management Supported?
             ibSmaPortMKeyLeasePeriod 1.3.6.1.3.117.3.1.4.24 unsigned32 read-only
Specifies the initial value of the lease period timer (in seconds). The lease period is the length of time that the M_Key Protection bits are to remain non-zero after a SubnSet(PortInfo) fails the M_Key authentication check. When the value is 0, the lease period shall never expire.
             ibSmaPortMKeyProtectBits 1.3.6.1.3.117.3.1.4.25 integer read-only
Management Key (M_Key) protection bits. Enumeration: 'succeedWithReturnZeroes': 3, 'failOnNoMatch': 4, 'noMKeyProtection': 1, 'succeedWithReturnKey': 2.
             ibSmaPortMasterSmSl 1.3.6.1.3.117.3.1.4.26 unsigned32 read-only
The administrative Service Level of the master SM that is managing this port.
             ibSmaPortInitTypeLoad 1.3.6.1.3.117.3.1.4.27 truthvalue read-only
The initialization type flags indicate the type of initialization requested by this port before SM moves it to Active or Armed state. Initialization Type flag: NoLoad. If the value is false(2), the attributes should be initialized. If the value is true(1), no data should be loaded into the attributes at all, asserting that the last-loaded data still exists and is valid.
             ibSmaPortInitTypeContent 1.3.6.1.3.117.3.1.4.28 truthvalue read-only
Initialization Type flag: PreserveContent. If the value is false(2), the port makes no request regarding the content of the data that is loaded into its attributes. If it is true(1), the port is requesting that all such data, if loaded, be set to the most recent content loaded by the SM.
             ibSmaPortInitTypePresence 1.3.6.1.3.117.3.1.4.29 truthvalue read-only
Initialization Type flag: PreservePresence. If the value is false(2), the port is requesting that all settable SA attributes referencing this port be removed prior to activating this port and Traps 64/65 be sent. If the value is true(1), the port is requesting that all such data be preserved, and that the traps not be sent.
             ibSmaPortInitTypeResuscitate 1.3.6.1.3.117.3.1.4.30 truthvalue read-only
Initialization Type flag: DoNotResuscitate. If the value is false(2), ibSmaPortInitTypeLoad, ibSmaPortInitTypeContent, and ibSmaPortInitTypePresence ARE valid. If the value is true(1), ibSmaPortInitTypeLoad, ibSmaPortInitTypeContent, and ibSmaPortInitTypePresence ARE NOT valid. The port is requesting that reinitialization of this port and the in/out of service traps (64/65) be delayed until this flag is set to false(1).
             ibSmaPortInitNoLoadReply 1.3.6.1.3.117.3.1.4.31 truthvalue read-only
The Init Reply flags are written by the SM prior to changing the port to Active or Armed state. Initialization Type Reply flag: NoLoadReply. If this value is false(2), the port attributes were initialized. If the value is true(1), no data was loaded into the port attributes.
             ibSmaPortInitPreserveContReply 1.3.6.1.3.117.3.1.4.32 truthvalue read-only
Initialization Type flag: PreserveContentReply. If this value is false(2), no information is available regarding the content of the data loaded into the port attributes. If the value is true(1), the data loaded into the port attributes was set to the content most recently loaded by the SM.
             ibSmaPortInitPreservePresReply 1.3.6.1.3.117.3.1.4.33 truthvalue read-only
Initialization Type Reply flag: PreservePresenceReply. If this value is false(2), all settable SA attributes referencing this port were removed prior to activating this port and the in/out service traps 64 and 65 were sent. If the value is true(1), all such data existing when this port was last active was not removed and the traps 64/65 were not sent.
             ibSmaPortMKeyViolations 1.3.6.1.3.117.3.1.4.34 counter32 read-only
Counts the number of SMP packets that have been received at this port that have invalid M_Keys. This object is a latching gauge, in that whenever the maximum gauge value is encountered (i.e., the count reaches all 1's), the SMA must reset the gauge to 0, before this object begins incrementing its count again.
             ibSmaPortPKeyViolations 1.3.6.1.3.117.3.1.4.35 counter32 read-only
Counts the number of SMP packets that have been received at this port that have invalid P_Keys. This object is a latching gauge, in that whenever the maximum gauge value is encountered (i.e., the count reaches all 1's), the SMA must reset the gauge to 0, before this object begins incrementing its count again.
             ibSmaPortQKeyViolations 1.3.6.1.3.117.3.1.4.36 counter32 read-only
Counts the number of SMP packets that have been received at this port that have invalid Q_Keys. This object is a latching gauge, in that whenever the maximum gauge value is encountered (i.e., the count reaches all 1's), the SMA must reset the gauge to 0, before this object begins incrementing its count again.
             ibSmaPortNumGuid 1.3.6.1.3.117.3.1.4.37 unsigned32 read-only
Number of GUID entries supported in the GUIDInfo attribute for this port found in the ibSmaGuidInfoTable.
             ibSmaPortSubnetTimeout 1.3.6.1.3.117.3.1.4.38 unsigned32 read-only
Specifies the maximum expected subnet propagation delay, which depends upon the configuration of the switches, to reach any other port in the subnet and shall also be used to determine the maximum rate which SubnTraps() can be sent from this port by the SMA.
             ibSmaPortResponseTimeValue 1.3.6.1.3.117.3.1.4.39 unsigned32 read-only
Specifies the expected maximum time between the port reception of a SMP and the transmission of the associated response.
         ibSmaDataPortInfo 1.3.6.1.3.117.3.1.5
             ibSmaPortInfoTable 1.3.6.1.3.117.3.1.5.1 no-access
A table containing SMA PortInfo information.
                 ibSmaPortInfoEntry 1.3.6.1.3.117.3.1.5.1.1 no-access
A conceptual row of the ibSmaPortInfoTable containing information about a particular data port and its attributes.
                     ibSmaPortIndex 1.3.6.1.3.117.3.1.5.1.1.1 ibdataport no-access
Index that identifies the InfiniBand data port.
                     ibSmaPortLinkWidthEnabled 1.3.6.1.3.117.3.1.5.1.1.2 integer read-only
Enabled link width, indicated as follows: 0: No State Change (NOP) 1: 1x 2: 4x 3: 1x or 4x 8: 12x 9: 1x or 12x 10: 4x or 12x 11: 1x, 4x or 12x 4 - 7, 12 - 254: Reserved (Ignored) 255: Set to LinkWidthSupported value. Enumeration: 'fourX': 2, 'fourXOr12X': 6, 'oneXOr4X': 3, 'oneX4XOr12X': 7, 'twelveX': 4, 'other': 9, 'linkWidthSupported': 8, 'oneX': 1, 'oneXOr12X': 5.
                     ibSmaPortLinkWidthSupported 1.3.6.1.3.117.3.1.5.1.1.3 integer read-only
Supported link width for this port. This is indicated as follows by the SMA: 1: 1x 3: 1x or 4x 11: 1x, 4x or 12x 0, 2, 4-10, 12-255: Reserved. Enumeration: 'oneX': 1, 'oneX4XOr12X': 3, 'other': 4, 'oneXOr4X': 2.
                     ibSmaPortLinkWidthActive 1.3.6.1.3.117.3.1.5.1.1.4 integer read-only
Currently active link width on this port. This is indicated as follows by the SMA: 1: 1x 2: 4x 8: 12x 0, 3, 4-7, 9-255: Reserved. Enumeration: 'oneX': 1, 'fourX': 2, 'twelveX': 3, 'other': 4.
                     ibSmaPortLinkSpeedSupported 1.3.6.1.3.117.3.1.5.1.1.5 integer read-only
Supported link speed, indicated as follows: 1: 2.5Gbps 0, 2 - 15: reserved Enumeration: 'twoPoint5Gbps': 1, 'other': 2.
                     ibSmaPortLinkState 1.3.6.1.3.117.3.1.5.1.1.6 integer read-only
The state of the link on this port. 0: No state change 1: Down (includes failed links) 2: Initialize 3: Armed 4: Active 5-15: Reserved Enumeration: 'down': 1, 'active': 4, 'init': 2, 'other': 5, 'armed': 3.
                     ibSmaPortPhysState 1.3.6.1.3.117.3.1.5.1.1.7 integer read-only
Physical Port State. Enumerated as: 0: No state change 1: Sleep 2: Polling 3: Disabled 4: PortConfigurationTraining 5: LinkUp 6: LinkErrorRecovery 7 - 15: Reserved Enumeration: 'portConfigTraining': 4, 'disabled': 3, 'other': 7, 'sleep': 1, 'polling': 2, 'linkUp': 5, 'linkErrorRecovery': 6.
                     ibSmaPortLinkDownDefaultState 1.3.6.1.3.117.3.1.5.1.1.8 integer read-only
LinkDownDefault-State 0: No state change 1: Sleep 2: Polling 3-15: Reserved Enumeration: 'other': 3, 'sleep': 1, 'polling': 2.
                     ibSmaPortLidMaskCount 1.3.6.1.3.117.3.1.5.1.1.9 unsigned32 read-only
LID Mask Control count for multipath support for CA and router ports.
                     ibSmaPortLinkSpeedActive 1.3.6.1.3.117.3.1.5.1.1.10 integer read-only
Currently active link speed, indicated as follows: 1: 2.5Gbps 0, 2 - 15: reserved. Enumeration: 'twoPoint5Gbps': 1, 'other': 2.
                     ibSmaPortLinkSpeedEnabled 1.3.6.1.3.117.3.1.5.1.1.11 integer read-only
Enabled link speed, indicated as follows: 0: No State Change (NOP) 1: 2.5 Gbps 2 - 14: Reserved (Ignored) 15: Set to LinkSpeedSupported value. Enumeration: 'twoPoint5Gbps': 1, 'other': 3, 'linkSpeedSupported': 2.
                     ibSmaPortNeighborMtu 1.3.6.1.3.117.3.1.5.1.1.12 integer read-only
Active maximum MTU enabled on this port for transmit: 1: 256 bytes 2: 512 bytes 3: 1024 bytes 4: 2048 bytes 5: 4096 bytes 0, 6 - 15: reserved Enumeration: 'mtu1024': 3, 'mtu512': 2, 'other': 6, 'mtu256': 1, 'mtu2048': 4, 'mtu4096': 5.
                     ibSmaPortVirtLaneSupport 1.3.6.1.3.117.3.1.5.1.1.13 integer read-only
Virtual Lane configuration supported on this port. Indicated as follows by the SMA: 1: VL0 2: VL0, VL1 3: VL0 - VL3 4: VL0 - VL7 5: VL0 - VL14 0, 6 - 15: reserved. Enumeration: 'vl0ToVl1': 2, 'vl0ToVl3': 3, 'vl0ToVl14': 5, 'vl0ToVl7': 4, 'other': 6, 'vl0': 1.
                     ibSmaPortVlHighPriorityLimit 1.3.6.1.3.117.3.1.5.1.1.14 unsigned32 read-only
Limit of High Priority component of VL Arbitration Table. This object indicates the amount of high priority packets that can be transmitted without an opportunity to send a low priority packet. Specifically, the number of bytes that can be sent is this value times 4K bytes. A 255 value means the byte limit is unbounded and a value of 0 means that only a single packet from the high-priority table may be sent before an opportunity is given to the low-priority table.
                     ibSmaPortVlArbHighCapacity 1.3.6.1.3.117.3.1.5.1.1.15 unsigned32 read-only
VL/Weight pairs supported on this port in the VLArbitration table (ibSmaHiPriVlArbTable) for high priority. Shall be 1 to 64 if more than one data VL is supported on this port, 0 otherwise.
                     ibSmaPortVlArbLowCapacity 1.3.6.1.3.117.3.1.5.1.1.16 unsigned32 read-only
VL/Weight pairs supported on this port in the VLArbitration table (ibSmaLoPriVlArbTable) for low priority. Shall be N to 64 if more than one data VL is supported on this port, 0 otherwise, N being the number of data VLs supported.
                     ibSmaPortMtuCapacity 1.3.6.1.3.117.3.1.5.1.1.17 integer read-only
Maximum MTU supported by this port. 1: 256 bytes 2: 512 bytes 3: 1024 bytes 4: 2048 bytes 5: 4096 bytes 0, 6 - 15: reserved Enumeration: 'mtu1024': 3, 'mtu512': 2, 'other': 6, 'mtu256': 1, 'mtu2048': 4, 'mtu4096': 5.
                     ibSmaPortVlStallCount 1.3.6.1.3.117.3.1.5.1.1.18 unsigned32 read-only
Specifies the number of sequential packets dropped that causes the port to enter the VLStalled state. The result of setting this value to 0 is undefined.
                     ibSmaPortHeadOfQueueLife 1.3.6.1.3.117.3.1.5.1.1.19 unsigned32 read-only
Sets the time a packet can live at the head of a Virtual Lane queue. This variable (HL) is used to compute the Head of the Queue Lifetime Limit (HLL). It is used in the formula when the HL value is between 0 and 19, inclusive. When HL is greater than 19, the HLL is to be interpreted as infinite.
                     ibSmaPortOperationalVls 1.3.6.1.3.117.3.1.5.1.1.20 integer read-only
Virtual Lanes operational on this port, indicated as follows: 0: No change 1: VL0 2: VL0 - VL1 3: VL0 - VL3 4: VL0 - VL7 5: VL0 - VL14 6 - 15: reserved Enumeration: 'vl0ToVl1': 2, 'vl0ToVl3': 3, 'vl0ToVl14': 5, 'vl0ToVl7': 4, 'other': 6, 'vl0': 1.
                     ibSmaPortPartEnforceInbound 1.3.6.1.3.117.3.1.5.1.1.21 truthvalue read-only
Indicates support of optional inbound partition enforcement. If true, partition enforcement on packets received on this port is enabled. If false partition enforcement on packets received from this port is disabled.
                     ibSmaPortPartEnforceOutbound 1.3.6.1.3.117.3.1.5.1.1.22 truthvalue read-only
Indicates support of optional outbound partition enforcement. If true, partition enforcement on packets transmitted on this port is enabled. If false partition enforcement on packets transmitted from this port is disabled.
                     ibSmaPortFilterRawPktInbound 1.3.6.1.3.117.3.1.5.1.1.23 truthvalue read-only
Indicates support of optional inbound raw packet enforcement. If true, raw packets arriving on this port are discarded. If false, raw enforcement on packets received from this port is disabled.
                     ibSmaPortFilterRawPktOutbound 1.3.6.1.3.117.3.1.5.1.1.24 truthvalue read-only
Indicates support of optional outbound raw packet enforcement. If true, raw packets departing on this port are discarded. If false, raw enforcement on packets leaving from this port is disabled.
                     ibSmaPortLocalPhysErrorThreshold 1.3.6.1.3.117.3.1.5.1.1.25 unsigned32 read-only
Local Physical Error threshold value. When the count of marginal link errors exceeds this threshold, the local link integrity error shall be detected.
                     ibSmaPortOverrunErrorThreshold 1.3.6.1.3.117.3.1.5.1.1.26 unsigned32 read-only
Overrun error threshold value. When the count of buffer overruns over consecutive flow control update periods exceeds this threshold, the excessive buffer overrun error shall be detected.
         ibSmaPKeyInfo 1.3.6.1.3.117.3.1.6
             ibSmaPKeyTable 1.3.6.1.3.117.3.1.6.1 no-access
This table contains SMA Partition Key information for this port.
                 ibSmaPKeyEntry 1.3.6.1.3.117.3.1.6.1.1 no-access
A conceptual row of the ibSmaPKeyTable containing information about the partition keys.
                     ibSmaPKeyIBAPortIndex 1.3.6.1.3.117.3.1.6.1.1.1 ibdataportandinvalid no-access
The IB data port index for the switch data ports. For switch management port 0 and for CAs and routers, the index value should be 255. This indicates that the entry is not referring to a valid switch data port.
                     ibSmaPKeyIndex 1.3.6.1.3.117.3.1.6.1.1.2 unsigned32 no-access
The entry Identifier for each Partition Key defined on a port. (The IB spec specifies 0..2047 blocks of 32 entries each for a total of 65,504 maximum entries, although the implemented limit is defined by PartitionCap for CAs, routers, and switch port 0, and by PartitionEnforcementCap for the switch data ports).
                     ibSmaPKeyMembership 1.3.6.1.3.117.3.1.6.1.1.3 integer read-only
If the P_Key type is limited(2), the switch may accept a packet with a matching full P_Key, but may not accept a packet with a matching limited key. If the P_Key type is full(3), the switch can accept packets with either a full or limited P_Key. If the P_Key type is none(1), there is no associated Key Base value. Enumeration: 'limited': 2, 'none': 1, 'full': 3.
                     ibSmaPKeyBase 1.3.6.1.3.117.3.1.6.1.1.4 unsigned32 read-only
15-bit base value of the P_Key that the switch will use to check against incoming packets.
         ibSmaSlToVlMapInfo 1.3.6.1.3.117.3.1.7
             ibSmaSL2VLMapTable 1.3.6.1.3.117.3.1.7.1 no-access
This table provides the virtual lane value for the output port/input port/service level mapping. Each output port contains a VL mapping for the next hop based on the input port the packet arrived on and its SL value.
                 ibSmaSL2VLMapEntry 1.3.6.1.3.117.3.1.7.1.1 no-access
Column definitions for the VL from output/input/SL entry.
                     ibSmaIBAOutPortIndex 1.3.6.1.3.117.3.1.7.1.1.1 ibdataportandinvalid no-access
The egress port index for the service level mapping. A value of 255 indicates the switch management port 0.
                     ibSmaIBAInPortIndex 1.3.6.1.3.117.3.1.7.1.1.2 ibdataportandinvalid no-access
The ingress port index for the service level mapping. A value of 255 indicates the switch management port 0.
                     ibSmaServiceLevelIndex 1.3.6.1.3.117.3.1.7.1.1.3 unsigned32 no-access
The Service Level value index for this mapping.
                     ibSmaVirtualLane 1.3.6.1.3.117.3.1.7.1.1.4 unsigned32 read-only
The outgoing packet's Virtual Lane value for this Service Level Mapping.
         ibSmaVLArbitInfo 1.3.6.1.3.117.3.1.8
             ibSmaHiPriVlArbTable 1.3.6.1.3.117.3.1.8.1 no-access
This table provides visibility into the High Priority Arbitration process for configuring VL/Weight pairs for the IB data ports.
                 ibSmaHiPriVlArbEntry 1.3.6.1.3.117.3.1.8.1.1 no-access
Column definitions for High Priority Arbitration Table.
                     ibSmaHiPriIBAPortIndex 1.3.6.1.3.117.3.1.8.1.1.1 ibdataport no-access
The index for the configured IBA port.
                     ibSmaHiPriNIndex 1.3.6.1.3.117.3.1.8.1.1.2 unsigned32 no-access
The High Priority list index.
                     ibSmaHiPriVirtLane 1.3.6.1.3.117.3.1.8.1.1.3 unsigned32 read-only
The virtual lane this entry applies to.
                     ibSmaHiPriWeight 1.3.6.1.3.117.3.1.8.1.1.4 unsigned32 read-only
Number of 64-byte units that may be transmitted from this VL when its turn in the arbitration process occurs. A weight of 0 indicates that the entry should be skipped.
             ibSmaLowPriVlArbTable 1.3.6.1.3.117.3.1.8.2 no-access
This table provides visibility into the Low Priority Arbitration process.
                 ibSmaLowPriVlArbEntry 1.3.6.1.3.117.3.1.8.2.1 no-access
Column definitions for Low Priority Arbitration Table.
                     ibSmaLowPriIBAPortIndex 1.3.6.1.3.117.3.1.8.2.1.1 ibdataport no-access
The index for the configured IB data port.
                     ibSmaLowPriNIndex 1.3.6.1.3.117.3.1.8.2.1.2 unsigned32 no-access
The Low Priority list index.
                     ibSmaLowPriVirtLane 1.3.6.1.3.117.3.1.8.2.1.3 unsigned32 read-only
The Virtual Lane this entry applies to.
                     ibSmaLowPriWeight 1.3.6.1.3.117.3.1.8.2.1.4 unsigned32 read-only
Number of 64-byte units that may be transmitted from this VL when its turn in the arbitration process occurs. A weight of 0 indicates that the entry should be skipped.
         ibSmaLFTInfo 1.3.6.1.3.117.3.1.9
             ibSmaLinForTable 1.3.6.1.3.117.3.1.9.1 no-access
A table containing information about the Linear Forwarding Table.
                 ibSmaLinForEntry 1.3.6.1.3.117.3.1.9.1.1 no-access
Current unicast forwarding Table entry configured by the Subnet Manager based on destination LID.
                     ibSmaLinDestDLIDIndex 1.3.6.1.3.117.3.1.9.1.1.1 ibunicastlid no-access
Index that identifies Destination Local Identifier (DLID) that the forwarding entry refers to in the Linear Forwarding Table.
                     ibSmaLinForwEgressPort 1.3.6.1.3.117.3.1.9.1.1.2 ibdataportandinvalid read-only
The port to which packets with the LID corresponding to this entry are to be forwarded.
         ibSmaRFTInfo 1.3.6.1.3.117.3.1.10
               ibSmaRandomForwardingTable 1.3.6.1.3.117.3.1.10.1 no-access
A table containing SMA Random Forwarding information.
                   ibSmaRandomForwardingEntry 1.3.6.1.3.117.3.1.10.1.1 no-access
A conceptual row of the ibSmaRandomForwardingTable containing information about the Random Forwarding Table.
                       ibSmaRandomForwardingPortIndex 1.3.6.1.3.117.3.1.10.1.1.1 ibdataport no-access
The port index value.
                       ibSmaRandomDestLID 1.3.6.1.3.117.3.1.10.1.1.2 unsigned32 read-only
Identifies Destination Local Identifier (DLID) that the forwarding entry refers to.
                       ibSmaRandomForwEgressPort 1.3.6.1.3.117.3.1.10.1.1.3 ibdataport read-only
The port to which packets with the LID corresponding to this entry are to be forwarded.
                       ibSmaRandomLMC 1.3.6.1.3.117.3.1.10.1.1.4 unsigned32 read-only
The LID Mask Control (LMC) of this LID. The LMC specifies the number of Path Bits in the Local Identifier.
                       ibSmaRandomIsValid 1.3.6.1.3.117.3.1.10.1.1.5 truthvalue read-only
If true, this LID/Port pair is valid. Note that when the SMA sets this parameter to false(2), entries can be removed.
         ibSmaMFTInfo 1.3.6.1.3.117.3.1.11
               ibSmaMulForTable 1.3.6.1.3.117.3.1.11.1 no-access
A table containing information about the Multicast Forwarding Table.
                   ibSmaMulForEntry 1.3.6.1.3.117.3.1.11.1.1 no-access
Current multicast forwarding table entry as configured by the Subnet Manager based on destination LID.
                       ibSmaMulDestDLIDIndex 1.3.6.1.3.117.3.1.11.1.1.1 ibmulticastlid no-access
Identifies Destination Local Identifier (DLID) that the forwarding entry refers to in the Multicast Forwarding Table.
                       ibSmaMulForwMask 1.3.6.1.3.117.3.1.11.1.1.2 ibsmportlist read-only
A 256-bit mask that represents the port list. An incoming packet with this LID table entry will be forwarded to all ports for which the bit in the port mask is set to 1.
         ibSmaSMInfo 1.3.6.1.3.117.3.1.12
               ibSmaSubMgrInfo 1.3.6.1.3.117.3.1.12.1
                   ibSmaSmInfoTable 1.3.6.1.3.117.3.1.12.1.1 no-access
A table containing SMA Subnet Manager information.
                       ibSmaSmInfoEntry 1.3.6.1.3.117.3.1.12.1.1.1 no-access
A conceptual row of the ibSmaSmInfoTable containing information about the Subnet Manager Table.
                           ibSmaSmInfoPortIndex 1.3.6.1.3.117.3.1.12.1.1.1.1 ibdataport no-access
The port index value.
                           ibSmaSmGuid 1.3.6.1.3.117.3.1.12.1.1.1.2 ibguid read-only
The Port GUID of the port where the SM resides.
                           ibSmaSmSmKey 1.3.6.1.3.117.3.1.12.1.1.1.3 octet string read-only
Key for this SM. This is shown as zeroes unless the requesting SM is proven to be the master, or the requester is otherwise authenticated.
                           ibSmaSmSmpCount 1.3.6.1.3.117.3.1.12.1.1.1.4 counter32 read-only
Counter that increments each time the SM issues an SMP or performs other management activities. This counter is used as a heartbeat indicator by standby SMs.
                           ibSmaSmPriority 1.3.6.1.3.117.3.1.12.1.1.1.5 unsigned32 read-only
Administratively assigned priority for this SM. This can be reset by master SM. 0 is the lowest priority. An out-of-band mechanism shall be provided to set this value. The default value SHALL be 0.
                           ibSmaSmState 1.3.6.1.3.117.3.1.12.1.1.1.6 integer read-only
Enumerated value indicating this SM's state. The InfiniBand enumeration values are: 0 - not active 1 - discovering 2 - standby 3 - master 4-15 - reserved. Note: a value of reserved returns unknown(5). Enumeration: 'notActive': 1, 'discovering': 2, 'master': 4, 'standby': 3, 'unknown': 5.
         ibSmaVendDiagInfo 1.3.6.1.3.117.3.1.13
               ibSmaVendDiagInfoTable 1.3.6.1.3.117.3.1.13.1 no-access
A table containing SMA Vendor Diagnostic Info information.
                   ibSmaVendDiagInfoEntry 1.3.6.1.3.117.3.1.13.1.1 no-access
A conceptual row of the ibSmaVendDiagInfoTable containing information about a particular data port's diagnostic status.
                       ibSmaVendDiagPortIndex 1.3.6.1.3.117.3.1.13.1.1.1 ibdataportandinvalid no-access
Index that identifies the port for the diagnostics. If the index value is 255, information about the management port is returned.
                       ibSmaPortGenericDiagCode 1.3.6.1.3.117.3.1.13.1.1.2 integer read-only
The generic portion of the Port Info Diagnostic code. Enumeration: 'softError': 4, 'other': 6, 'initializing': 3, 'hardError': 5, 'performingSelfTest': 2, 'portReady': 1.
                       ibSmaPortVendorDiagCode 1.3.6.1.3.117.3.1.13.1.1.3 unsigned32 read-only
The vendor specific portion of the Port Info Diagnostic code.
                       ibSmaPortVendorDiagIndexFwd 1.3.6.1.3.117.3.1.13.1.1.4 truthvalue read-only
Flag to control ibSmaPortVendorDiagData data buffer. If this boolean is true(1), the data buffer contains meaningful vendor-supplied additional diagnostic information. If this object is false(2), the buffer is empty.
                       ibSmaPortVendorDiagData 1.3.6.1.3.117.3.1.13.1.1.5 octet string read-only
Data buffer that can contain additional vendor-specific diagnostic information. The ibSmaPortVendorDiagIndexFwd flag controls whether this object contains meaningful data. Note: in IB, this buffer comprises n number of 62 byte buffers. This object defines a buffer that can hold up to 2 of these IB chained buffers.
         ibSmaLedInfo 1.3.6.1.3.117.3.1.14
               ibSmaLedInfoTable 1.3.6.1.3.117.3.1.14.1 no-access
A table containing SMA LED Info information.
                   ibSmaLedInfoEntry 1.3.6.1.3.117.3.1.14.1.1 no-access
A conceptual row of the ibSmaLedInfoTable containing information about a particular data port's LED status.
                       ibSmaLedIndex 1.3.6.1.3.117.3.1.14.1.1.1 ibdataport no-access
Index that identifies the IB data port with its LED.
                       ibSmaLedState 1.3.6.1.3.117.3.1.14.1.1.2 integer read-only
State of the LED. Enumeration: 'unknown': 1, 'off': 3, 'on': 2.
     ibSmaNotifications 1.3.6.1.3.117.3.2
         ibSmaNotificationPrefix 1.3.6.1.3.117.3.2.0
             ibSmaPortLinkStateChange 1.3.6.1.3.117.3.2.0.1
This notification translates InfiniBand SMA Trap 128: Link State of at least one port of switch at has changed.
             ibSmaLinkIntegrityThresReached 1.3.6.1.3.117.3.2.0.2
This notification translates InfiniBand SMA Trap 129: Local Link Integrity threshold reached at .
             ibSmaExcessBuffOverrunThres 1.3.6.1.3.117.3.2.0.3
This notification translates InfiniBand SMA Trap 130: Excessive Buffer Overrun threshold reached at .
             ibSmaFlowCntrlUpdateTimerExpire 1.3.6.1.3.117.3.2.0.4
This notification translates InfiniBand SMA Trap 131: Switch Flow Control Update watchdog timer expired at .
             ibSmaCapabilityMaskModified 1.3.6.1.3.117.3.2.0.5
This notification translates InfiniBand SMA Trap 144: The capability mask at has been modified to .
             ibSmaSysImageGuidModified 1.3.6.1.3.117.3.2.0.6
This notification translates InfiniBand SMA Trap 145: The System Image GUID at has been modified to .
             ibSmaBadManagementKey 1.3.6.1.3.117.3.2.0.7
This notification translates InfiniBand SMA Trap 256: Bad M_Key, from attempted with and .
             ibSmaBadPartitionKey 1.3.6.1.3.117.3.2.0.8
This notification translates InfiniBand SMA Trap 257: Bad P_Key, from // to // on .
             ibSmaBadQueueKey 1.3.6.1.3.117.3.2.0.9
This notification translates InfiniBand SMA Trap 258: Bad Q_Key, from // to // on .
             ibSmaBadPKeyAtSwitchPort 1.3.6.1.3.117.3.2.0.10
This notification translates InfiniBand SMA Trap 259: Bad P_Key, from // to // on at switch external port , where the validity of the fields is indicated by .
     ibSmaConformance 1.3.6.1.3.117.3.3
         ibSmaCompliances 1.3.6.1.3.117.3.3.1
             ibSmaBasicNodeCompliance 1.3.6.1.3.117.3.3.1.1
The basic node implementation requirements for agents that support the IPOIB SMA MIB.
             ibSmaFullSwitchCompliance 1.3.6.1.3.117.3.3.1.2
The full node implementation requirements for agents that support the IPOIB SMA MIB for InfiniBand switches.
             ibSmaFullRouterCACompliance 1.3.6.1.3.117.3.3.1.3
The full node implementation requirements for agents that support the IPOIB SMA MIB for InfiniBand CAs and routers.
         ibSmaGroups 1.3.6.1.3.117.3.3.2
             ibSmaNodeGroup 1.3.6.1.3.117.3.3.2.1
The ibSmaNodeGroup defines the MIB objects that describe this InfiniBand subnet node.
             ibSmaSwitchGroup 1.3.6.1.3.117.3.3.2.2
The ibSmaSwitchGroup defines the MIB objects that describe this InfiniBand switch.
             ibSmaGuidGroup 1.3.6.1.3.117.3.3.2.3
The ibSmaGuidGroup defines the MIB object that describes the GUIDs associated with this node.
             ibSmaMgmtPortGroup 1.3.6.1.3.117.3.3.2.4
The ibSmaMgmtPortGroup defines the MIB objects that describe the management port.
             ibSmaDataPortGroup 1.3.6.1.3.117.3.3.2.5
The ibSmaDataPortGroup defines MIB objects for IB data ports.
             ibSmaPKeyGroup 1.3.6.1.3.117.3.3.2.6
The ibSmaPKeyGroup defines the MIB objects that describe the Partition Keys.
             ibSmaSlToVlMapGroup 1.3.6.1.3.117.3.3.2.7
The ibSmaSlToVlMapGroup defines the MIB objects that describe the Service Level to Virtual Lane mapping.
             ibSmaVLArbitGroup 1.3.6.1.3.117.3.3.2.8
The ibSmaVLArbitGroup defines the MIB objects that describe the Virtual Lane High and Low Arbitrations.
             ibSmaLFTGroup 1.3.6.1.3.117.3.3.2.9
The ibSmaLFTGroup defines the MIB objects that describe the Linear Forwarding Table.
             ibSmaRFTGroup 1.3.6.1.3.117.3.3.2.10
The ibSmaRFTGroup defines the MIB objects that describe the Random Forwarding Table.
             ibSmaMFTGroup 1.3.6.1.3.117.3.3.2.11
The ibSmaMFTGroup defines the MIB objects that describe the Multicast Forwarding Table.
             ibSmaSMGroup 1.3.6.1.3.117.3.3.2.12
The ibSmaSMGroup defines the MIB objects that describe the Subnet Manager Information Table.
             ibSmaVendDiagGroup 1.3.6.1.3.117.3.3.2.13
The ibSmaVendDiagGroup defines the MIB objects that describe the vendor diagnostics table.
             ibSmaLedGroup 1.3.6.1.3.117.3.3.2.14
The ibSmaSMGroup defines the MIB objects that describe the LED table.
             ibSmaNotificationsGroup 1.3.6.1.3.117.3.3.2.15
The notifications that an IPOIB SNMP agent transmits on the behalf of the SMA Trap message implementation.