IANA-MAU-TC-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: IANA-MAU-TC-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dot3MauType 1.3.6.1.2.1.26.4
     dot3MauTypeAUI 1.3.6.1.2.1.26.4.1
no internal MAU, view from AUI
     dot3MauType10Base5 1.3.6.1.2.1.26.4.2
thick coax MAU
     dot3MauTypeFoirl 1.3.6.1.2.1.26.4.3
FOIRL MAU
     dot3MauType10Base2 1.3.6.1.2.1.26.4.4
thin coax MAU
     dot3MauType10BaseT 1.3.6.1.2.1.26.4.5
UTP MAU. Note that it is strongly recommended that agents return either dot3MauType10BaseTHD or dot3MauType10BaseTFD if the duplex mode is known. However, management applications should be prepared to receive this MAU type value from older agent implementations.
     dot3MauType10BaseFP 1.3.6.1.2.1.26.4.6
passive fiber MAU
     dot3MauType10BaseFB 1.3.6.1.2.1.26.4.7
sync fiber MAU
     dot3MauType10BaseFL 1.3.6.1.2.1.26.4.8
async fiber MAU. Note that it is strongly recommended that agents return either dot3MauType10BaseFLHD or dot3MauType10BaseFLFD if the duplex mode is known. However, management applications should be prepared to receive this MAU type value from older agent implementations.
     dot3MauType10Broad36 1.3.6.1.2.1.26.4.9
broadband DTE MAU. Note that 10BROAD36 MAUs can be attached to interfaces but not to repeaters.
     dot3MauType10BaseTHD 1.3.6.1.2.1.26.4.10
UTP MAU, half duplex mode
     dot3MauType10BaseTFD 1.3.6.1.2.1.26.4.11
UTP MAU, full duplex mode
     dot3MauType10BaseFLHD 1.3.6.1.2.1.26.4.12
async fiber MAU, half duplex mode
     dot3MauType10BaseFLFD 1.3.6.1.2.1.26.4.13
async fiber MAU, full duplex mode
     dot3MauType100BaseT4 1.3.6.1.2.1.26.4.14
4 pair category 3 UTP
     dot3MauType100BaseTXHD 1.3.6.1.2.1.26.4.15
2 pair category 5 UTP, half duplex mode
     dot3MauType100BaseTXFD 1.3.6.1.2.1.26.4.16
2 pair category 5 UTP, full duplex mode
     dot3MauType100BaseFXHD 1.3.6.1.2.1.26.4.17
X fiber over PMT, half duplex mode
     dot3MauType100BaseFXFD 1.3.6.1.2.1.26.4.18
X fiber over PMT, full duplex mode
     dot3MauType100BaseT2HD 1.3.6.1.2.1.26.4.19
2 pair category 3 UTP, half duplex mode
     dot3MauType100BaseT2FD 1.3.6.1.2.1.26.4.20
2 pair category 3 UTP, full duplex mode
     dot3MauType1000BaseXHD 1.3.6.1.2.1.26.4.21
PCS/PMA, unknown PMD, half duplex mode
     dot3MauType1000BaseXFD 1.3.6.1.2.1.26.4.22
PCS/PMA, unknown PMD, full duplex mode
     dot3MauType1000BaseLXHD 1.3.6.1.2.1.26.4.23
Fiber over long-wavelength laser, half duplex mode
     dot3MauType1000BaseLXFD 1.3.6.1.2.1.26.4.24
Fiber over long-wavelength laser, full duplex mode
     dot3MauType1000BaseSXHD 1.3.6.1.2.1.26.4.25
Fiber over short-wavelength laser, half duplex mode
     dot3MauType1000BaseSXFD 1.3.6.1.2.1.26.4.26
Fiber over short-wavelength laser, full duplex mode
     dot3MauType1000BaseCXHD 1.3.6.1.2.1.26.4.27
Copper over 150-Ohm balanced cable, half duplex mode
     dot3MauType1000BaseCXFD 1.3.6.1.2.1.26.4.28
Copper over 150-Ohm balanced cable, full duplex mode
     dot3MauType1000BaseTHD 1.3.6.1.2.1.26.4.29
Four-pair Category 5 UTP, half duplex mode
     dot3MauType1000BaseTFD 1.3.6.1.2.1.26.4.30
Four-pair Category 5 UTP, full duplex mode
     dot3MauType10GigBaseX 1.3.6.1.2.1.26.4.31
X PCS/PMA, unknown PMD.
     dot3MauType10GigBaseLX4 1.3.6.1.2.1.26.4.32
X fiber over WWDM optics
     dot3MauType10GigBaseR 1.3.6.1.2.1.26.4.33
R PCS/PMA, unknown PMD.
     dot3MauType10GigBaseER 1.3.6.1.2.1.26.4.34
R fiber over 1550 nm optics
     dot3MauType10GigBaseLR 1.3.6.1.2.1.26.4.35
R fiber over 1310 nm optics
     dot3MauType10GigBaseSR 1.3.6.1.2.1.26.4.36
R fiber over 850 nm optics
     dot3MauType10GigBaseW 1.3.6.1.2.1.26.4.37
W PCS/PMA, unknown PMD.
     dot3MauType10GigBaseEW 1.3.6.1.2.1.26.4.38
W fiber over 1550 nm optics
     dot3MauType10GigBaseLW 1.3.6.1.2.1.26.4.39
W fiber over 1310 nm optics
     dot3MauType10GigBaseSW 1.3.6.1.2.1.26.4.40
W fiber over 850 nm optics
     dot3MauType10GigBaseCX4 1.3.6.1.2.1.26.4.41
X copper over 8 pair 100-Ohm balanced cable
     dot3MauType2BaseTL 1.3.6.1.2.1.26.4.42
Voice grade UTP copper, up to 2700m
     dot3MauType10PassTS 1.3.6.1.2.1.26.4.43
Voice grade UTP copper, up to 750m
     dot3MauType100BaseBX10D 1.3.6.1.2.1.26.4.44
One single-mode fiber OLT
     dot3MauType100BaseBX10U 1.3.6.1.2.1.26.4.45
One single-mode fiber ONU
     dot3MauType100BaseLX10 1.3.6.1.2.1.26.4.46
Two fiber
     dot3MauType1000BaseBX10D 1.3.6.1.2.1.26.4.47
One single-mode fiber OLT
     dot3MauType1000BaseBX10U 1.3.6.1.2.1.26.4.48
One single-mode fiber ONU
     dot3MauType1000BaseLX10 1.3.6.1.2.1.26.4.49
Two fiber 10km
     dot3MauType1000BasePX10D 1.3.6.1.2.1.26.4.50
One single-mode fiber OMP OLT 10km
     dot3MauType1000BasePX10U 1.3.6.1.2.1.26.4.51
One single-mode fiber OMP ONU 10km
     dot3MauType1000BasePX20D 1.3.6.1.2.1.26.4.52
One single-mode fiber OMP OLT 20km
     dot3MauType1000BasePX20U 1.3.6.1.2.1.26.4.53
One single-mode fiber OMP ONU 20km
 ianaMauTC 1.3.6.1.2.1.26.7
This MIB module defines dot3MauType OBJECT-IDENTITIES and IANAifMauListBits and JackType Textual Conventions, specifying enumerated values of the ifMauTypeListBits and ifJackType objects respectively, defined in the MAU-MIB. A Standards Action (as defined in RFC 2434) is REQUIRED for the addition of the new MAU types, so that any prospective assignments are documented in an RFC. Any document that proposes such an addition is REQUIRED to note any special properties of the MAU types that it defines -- for example, side effects on the ifStackTable such as are noted in RFC 3636 Section 3.4.1 for 10GBASE-W MAUs.