HUAWEI-WLAN-CONFIGURATION-MIB: View SNMP OID List / Download MIB

V3.36 modify the node descriptions.

This object indicates user names for Telnet-based login to APs.

This object indicates passwords for Telnet-based login to APs.

This object indicates query and setting of MAC addresses of clients logging in to APs.

This object indicates the status of the global LLDP function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the global IPv6 function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the IPv6 function of users. The default value is 1 . 1: disable 2: enable. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the period of caching AP performance. The default value is 15. It is expressed in minutes.

This object indicates the status of the real-time collection switch.

This object indicates the regular period of an AC collecting AP performance data.

This object indicates the real-time period of an AC collecting AP performance data.

Description.

This object indicates the IP address of the standby AC.

This object indicates setting of the IPv6 address of the standby AC.

This object indicates the AC priority that determines whether the AC can be selected as the active AC. The default value is 0.

This object indicates the status of the hot backup function. The default value is 2. Enumeration: 'enable': 1, 'disable': 2.

This object indicates the status of the switchback function. The default value is 1. Enumeration: 'enable': 1, 'disable': 2.

This object indicates whether to restore the default setting of the IP address of the standby AC.

This object indicates whether to restore the default setting of the priority of the standby AC.

This object indicates whether to restore the default setting of the IPv6 address of the standby AC.

This object indicates the HSB type. The default value is 1. Enumeration: 'hsbGroup': 2, 'hsbService': 3, 'disable': 1.

This object indicates the HSB group ID. If the HSB type is set to Disable, the ID is 0xFFFFFFFF.

This object indicates the ID of the HSB channel. If the HSB type is set to Disable, the ID is 0xFFFFFFFF.

Description.

Description.

Description.

Description.

This object indicates the switch of recording user information in the log. 1:disable 2:enable. Enumeration: 'enable': 2, 'disable': 1.

Description.

Description.

Description.

Description.

Description.

Ap password policy,the default is disable Enumeration: 'enable': 2, 'disable': 1.

Set the days of password expire,the default is 90

The number of password history record,the default is 5

The days of password before-expire,the default is 30

Set password original-alert,the default is enable Enumeration: 'enable': 2, 'disable': 1.

Get the password set time

Query password is expired or not Enumeration: 'notexpired': 1, 'expired': 2.

Query password is original or not Enumeration: 'notoriginal': 1, 'original': 2.

This object indicates the switch of recording user online and offline information in the log. 1:disable 2:enable. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the global source IPv4 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.

This object indicates the global source IPv6 address for reporting location data in AeroScout or Ekahau location mode. You choose an IPv4 or IPv6 address.

Description.

This object indicates the switch of station delay offline. 1:disable 2:enable. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the station delay offline aging time. range(1..86400)

This object indicates the switch of station delay offline new station online. 1:disable 2:enable. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the max number of station delay offline. range (1..max)

This object indicates the spectrum-analysis source IPv4 address for reporting spectrum-analysis data in spectrum-analysis server. You choose an IPv4 or IPv6 address.

This object indicates the spectrum-analysis source IPv6 address for reporting spectrum-analysis data in spectrum-analysis server. You choose an IPv4 or IPv6 address.

This object indicates the global source IPv4 address for reporting ble location data. You choose an IPv4 address.

This object indicates the global source IPv6 address for reporting ble location data. You choose an IPv6 address.

Description.

Description.

Description.

Description.

This object indicates the swtich of license centralized. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the ipv4 address of license centralized server.

This object indicates the ipv6 address of license centralized server.

This object indicates the ipv4 address of license centralized client.

This object indicates the ipv6 address of license centralized client.

This object indicates the current role of license centralized device. Enumeration: 'client': 2, 'server': 1.

This object indicates the used of license in license pool.

This object indicates the total number of license pool.

This object indicates the status of rogue device log switch. The default value is 1. 1: disable 2: enable. Enumeration: 'enable': 2, 'disable': 1.

Description.

Description.

This object indicates the AP name.

This object indicates the neighbor AP name.

This object indicates the row status of this table.

Description.

Description.

This object indicates the AP card ID.

This object indicates the operation type to the IOT card of the AP. Enumeration: 'resetfactoryconfiguration': 2, 'switchfirmware': 3, 'resetnetworkconfiguration': 4, 'reboot': 1.

This object indicates the status of anti-interference switch. The default value is 2. 1: disable 2: enable. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of anti-interference per-packet-TPC switch. The default value is 2. 1: disable 2: enable. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the aeroscout local IPv4 address for receiving message from aeroscout server.

This object indicates the aeroscout local IPv6 address for receiving message from aeroscout server.

This object indicates the AP RTU load file name.

This object indicates the AP authentication mode. The default value is 1. Enumeration: 'macAuth': 1, 'snAuth': 2, 'noAuth': 3.

This table is used to add and delete AP MAC addresses in the white lists.

The index of this table is hwWlanApMacWhitelistMacAddr.

This object indicates the MAC address of an AP.

This object indicates the row status of this table.

This table is used to add and delete AP sequence numbers in the white lists of AP sequence numbers.

The index of this table is hwWlanApSnWhitelistSn.

Description.

Indicate the row status of this table.

This table describes the AP MAC blacklist.This table is used to add an AP's MAC address to the blacklist or delete an AP's MAC address from the blacklist.

The index of this table is hwWlanApMacBlacklistMacAddr.

This object indicates the MAC address of an AP.

This object indicates the row status of this table.

This table is used to create or delete AP groups and bind or unbind the AP system profile, 2G radio profile, and domain profile.

The index of this table is hwAPGroupName.

This object indicates the AP group name. It is the index of the table.

This object indicates the system profile to which AP groups are bound. The default value is default.

This object indicates the domain profile to which AP groups are bound. The default value is default.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ROWSTATUS_ACTIVE: active ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy

This object indicates the bound WIDS profile.

This object indicates the bound BLE profile.

This object indicates the UUID String value of Group.

This object indicates the UUID Hex value of Group.

This object indicates the site code of Group.

This object indicates the domain name of Group.

This object indicates the ap location of Group.

This object indicates the ap numbers of Group.

This object indicates the UUID String value of Group.

This object indicates the IP Version of AP. Enumeration: 'all': 1, 'ipv4': 2, 'ipv6': 3.

This table is the AP wired port profile table.This table is used to bind a wired port profile to an AP group or unbind a wired port profile from an AP group.

Indexes of this table are hwAPGroupName, hwAPGrpWPInterfaceType, and hwAPGrpWPInterfaceNum.

This object indicates the interface type. It is the index of the table. Enumeration: 'ge': 2, 'xge': 5, 'multige': 4, 'fe': 1, 'trunk': 3.

This object indicates the interface index.

This object indicates the bound wired port profile.

This object indicates the row status of this table. ROWSTATUS_CREATEAN.

This table is used to bind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile to an AP group or unbind a 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, or spectrum profile from an AP group..

Indexes of this table are hwAPGroupName and hwAPGrpRadioId.

This object indicates the radio ID. It is the index of the table.

This object indicates the bound 5G radio profile.

This object indicates the bound Mesh profile.

This object indicates the bound WDS profile.

This object indicates the bound location profile.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.

This object indicates the 2G radio profile to which AP groups are bound. The default value is default.

This object indicates the bound whitelist profile.

This object indicates the bound whitelist profile.

This object indicates the name of a 2G radio profile. It is the index of the table. Enumeration: 'enable': 2, 'disable': 1.

This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).

This object indicate a bandwidth. The default value is 1. Enumeration: 'ht80': 4, 'ht160': 5, 'ht40Minus': 3, 'invalid': 255, 'ht20': 1, 'ht40Plus': 2.

This object indicates a power value. The default value is 127. The configuration is saved but the actual power is determined by the maximum power supported by the AP.

This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.

This object indicates a radio coverage distance. The default value is 3. The unit is 0.1 km.

This object indicates the radio working mode. The default value is 1. Enumeration: 'proxyScan': 4, 'dualband': 3, 'monitor': 2, 'normal': 1.

This object indicates the setting of the frequency band for radio 0. The default value is 1. 1: frequency2G, 2: frequency5G. Enumeration: 'frequency2G': 1, 'frequency5G': 2.

This object indicates the status of the spectrum analysis function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the device detection function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.

This object indicates the status of the device detection function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.

This object indicates the status of the automatic channel selection function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the automatic power selection function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

Description. Enumeration: 'enable': 2, 'disable': 1.

Description. Enumeration: 'enable': 2, 'disable': 1.

Description.

Description. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the automatic bandwidth selection function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the referencing data-analysis function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This table is used to create VAPs in an AP group.

Indexes of this table are hwAPGroupName, hwAPGrpRadioId, and hwAPGrpWlanId.

This object indicates the WLAN ID. It is the index of the table.

This object indicates the bound VAP profile.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.

This object indicates the service VLAN for the VAP. The invalid value is 0.

This object indicates the VLAN pool to which the VAP is bound.

This table is used to create or delete an AP specific profile and bind an AP system profile, 2G radio profile, or domain profile to it or unbind an AP system profile, 2G radio profile, or domain profile from it.

The index of this table is hwAPSpApMac.

This object indicates the system profile bound to the AP specific profile.

This object indicates the domain profile bound to the AP specific profile.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.

This object indicates the MAC address of an AP.

This object indicates the AP ID.

This object indicates the domain profile bound to the AP specific profile.

This object indicates the bound WIDS profile.

This object indicates the bound BLE profile.

This object indicates the longitude.

This object indicates the latitude.

This object indicates the IP address allocation mode. Enumeration: 'dhcp': 2, 'static': 1, 'invalid': -1, 'slaac': 3.

This object indicates the AP's IPv4 address. hwAPSpApIPv4Address takes effect if hwAPSpApAddressMode is set to static.

This object indicates the AP's IPv4 mask. hwAPSpApIPv4Mask takes effect if hwAPSpApAddressMode is set to static.

This object indicates the AP's IPv4 gateway. hwAPSpApIPv4Gateway takes effect if hwAPSpApAddressMode is set to static.

This object indicates the AP's IPv6 address. hwAPSpApIPv6Address takes effect if hwAPSpApAddressMode is set to static.

This object indicates the length of the IPv6 address prefix.

This object indicates the AP's IPv6 gateway. hwAPSpApIPv6Gateway takes effect if hwAPSpApAddressMode is set to static.

This object indicates the AC IPv4 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.

This object indicates the AC IPv6 address list. NOTE AC lists are separated by question marks (?).A maximum of four AC lists can be configured.

Description.

Description.

This object indicates the AP branch group name.

This object indicates the ap location.

This object indicates the site code.

This object indicates the domain name.

This object indicates the AP zone name.

This table is used to bind an AP wired port profile to an AP specific profile or unbind an AP wired port profile from an AP specific profile..

Indexes of this table are hwAPSpWPInterfaceType, hwAPSpWPInterfaceNum and hwAPSpApMac.

This object indicates the interface type. Enumeration: 'ge': 2, 'xge': 5, 'multige': 4, 'fe': 1, 'trunk': 3.

This object indicates the interface index.

This object indicates the bound wired port profile.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.

This object indicates the AP ID.

This table records the information about profiles bound based on radio in an AP specific profile, including 5G radio profile, Mesh profile, WDS profile, WIDS profile, location profile, and spectrum profile.

Indexes of this table are hwAPSpecificName and hwAPSpRadio.

This object indicates the radio ID. It is the index of the table.

This object indicates the bound 5G radio profile.

This object indicates the bound Mesh profile.

This object indicates the bound WDS profile.

This object indicates the bound location profile.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.

This object indicates the bound 2G radio profile.

This object indicates the bound whitelist profile.

This object indicates the bound whitelist profile.

This object indicates the switch of radio. The default value is 255. Enumeration: 'disable': 1, 'invalid': 255.

This object indicates a radio-frequency channel. For 2.4G, the value ranges from 1 to 13. For 5G, the value ranges from 36 to 196 (with a separation interval of 4).

This object indicate a bandwidth. The default value is 255. Enumeration: 'ht80': 4, 'ht160': 5, 'ht40Minus': 3, 'invalid': 255, 'ht20': 1, 'ht40Plus': 2.

This object indicates a power value. The default value is 255. The configuration is saved but the actual power is determined by the maximum power supported by the AP.

This object indicates antenna gains. The default value 0xFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.

This object indicates a radio coverage distance. The default value is 65535. The unit is 0.1 km.

This object indicates the radio working mode. The default value is 255. Enumeration: 'proxyScan': 4, 'dualband': 3, 'monitor': 2, 'invalid': 255, 'normal': 1.

This object indicates the setting of the frequency band for radio 0. The default value is invalid. 1: frequency2G, 2: frequency5G. Enumeration: 'frequency2G': 1, 'frequency5G': 2, 'invalid': 255.

This object indicates the status of the spectrum analysis function. The default value is 255. Enumeration: 'enable': 2, 'invalid': 255.

This object indicates the status of the device detection function. The default value is 255. Enumeration: 'enable': 2, 'invalid': 255.

This object indicates the bit map of the brute force attack switch. bit0:weak-iv, bit1:spoof, bit2:flood, bit3:wpa-psk, bit4:wpa2-psk, bit5:wapi-psk, bit6:wep-psk.

This object indicates the status of the device detection function. The default value is 255. Enumeration: 'enable': 2, 'invalid': 255.

This object indicates the AP ID.

This object indicates a radio-frequency channel. The value ranges from 42,58,106,122,138,155.

This object indicates the status of the automatic channel selection function. The default value is 255. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 255.

This object indicates the status of the automatic power selection function. The default value is 255. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 255.

This object indicates the status of Cts Switch. The default value is 255. Enumeration: 'disable': 1, 'invalid': 255.

This object indicates the status of Beacon Switch. The default value is 255. Enumeration: 'disable': 1, 'invalid': 255.

This object indicates Cts Delay time. The default value is 0.

This object indicates the status of Beacon Switch. The default value is 255. Enumeration: 'disable': 1, 'invalid': 255.

This object indicates the status of the automatic bandwidth selection function. The default value is 255. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 255.

This object indicates the status of the referencing data-analysis function. The default value is 255. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 255.

This object indicates weak IV attack detection. The default value is 255. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 255.

This object indicates spoofing attack detection. The default value is 255. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 255.

This object indicates flood attack detection. The default value is 255. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 255.

This object indicates brute force attack detection in WPA-PSK authentication. The default value is 255. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 255.

This object indicates brute force attack detection in WPA2-PSK authentication. The default value is 255. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 255.

This object indicates brute force attack detection in WAPI-PSK authentication. The default value is 255. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 255.

This object indicates brute force attack detection in WEP shared key authentication. The default value is 255. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 255.

This table is used to create VAPs in an AP specific profile.

Indexes of this table are hwAPSpWlan, hwAPSpRadio, and hwAPSpApMac.

This object indicates the WLAN ID. It is the index of the table.

This object indicates the bound VAP profile.

This object indicates the row status of this table. createAndGo(4) and destroy(6) are commonly used.

This object indicates the AP ID.

This object indicates the service VLAN for the VAP. The invalid value is 0.

This object indicates the VLAN pool to which the VAP is bound.

This table is used to configure country codes, calibration channels, and calibration channel bandwidths.

The index of this table is hwRegulatoryDomainProfileName.

This object indicates the name of a regulatory domain profile. It is the index of the table.

This object indicates the country code. Its value range is subject to the country code table. The default value is CN.

This object indicates the calibration bandwidth on the 5 GHz frequency band. The default value is 1 ? 1: bw20 MHz ? 2: bw40 MHz ? 3: bw80 MHz. Enumeration: 'bw20Mhz': 1, 'bw80Mhz': 3, 'bw40Mhz': 2.

This object indicates the calibration channel set on the 5 GHz frequency band.

This object indicates the calibration channel set on the 2 GHz frequency band.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.

This object indicates wide band status. The default value is disable. Enumeration: 'enable': 2, 'disable': 1.

This object indicates channel lode mode. The default value is outdoor. Enumeration: 'outdoor': 2, 'indoor': 1.

This table is used to create or delete an AP system profile and configure AP attributes.

The index of this table is hwApSystemProfName.

This object indicates the name of an AP system profile. It is the index of the table.

Description.

This object indicates the sampling interval for the AC to collecting AP performance data. The default value is 30. It is expressed in seconds.

This object indicates whether to enable the AP's LED indicator. The default value is 2. Enumeration: 'on': 2, 'off': 1.

This object indicates the maximum number of access users on an AP. The default value is 128.

This object indicates the MTU of an AP interface. The default value is 1500.

This object indicates a Mesh role. The default value is 1. Enumeration: 'mp': 1, 'mpp': 2.

This object indicates the status of the AP-based offline VAP switch. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the management VLAN for APs. The default value is 0xFFFFFFFF.

This object indicates the high temperature alarm threshold on an AP. The default value 0xFFFFFFFF indicates the system threshold of the AP NOTE System thresholds vary with different AP types. For details, see AP device information.

This object indicates the low temperature alarm threshold on an AP. The default value 0xFFFF indicates the system threshold of the AP.

This object indicates the high power threshold of an optical module. The default value is 1000.

This object indicates the low power threshold of an optical module. The default value is 50.

This object indicates the high temperature threshold of an optical module. The default value is 70.

This object indicates the low temperature threshold of an optical module. The default value is -5.

This object indicates the memory usage alarm threshold of an AP. The default value is 80. It is expressed in percentage.

This object indicates the CPU usage alarm threshold of an AP. The default value is 90. It is expressed in percentage.

This object indicates whether to enable Telnet. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates whether to enable SSH. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates whether to enable the console. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the log backup level. The default value is 7. Enumeration: 'info': 7, 'notice': 6, 'emergency': 1, 'alert': 2, 'critical': 3, 'error': 4, 'debug': 8, 'warning': 5.

This object indicates the IP address of the log server.

This object indicates the IPv6 address of the log server.

This object indicates the status of the alarm suppression switch. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the alarm suppression period. The default value is 60 seconds.

This object indicates whether to enable the offline service retaining function. The default value is 2. Enumeration: 'allowAccessAlsoNoauth': 4, 'enable': 1, 'allowaccess': 3, 'disable': 2.

This object indicates the AC priority. A smaller value indicates a higher priority. The default value 0xFFFFFFFF indicates that no priority is configured.

This object indicates the IP address of the standby AC.

This object indicates the IPv6 address of the standby AC.

This object indicates the EAP Start packet conversion mode. The default value is 2. Enumeration: 'broadcast': 1, 'unicast': 3, 'multicast': 2.

This object indicates the EAP Start packet conversion mode. The default value is 1. Enumeration: 'equalBssid': 1, 'always': 2.

This object indicates that EAP Start packets are converted to those with specific MAC addresses.

This object indicates the EAP Response packet conversion mode. The default value is 4. Enumeration: 'broadcast': 1, 'specific': 3, 'multicast': 2, 'learnling': 4.

This object indicates the EAP Response packet conversion mode. The default value is 1. Enumeration: 'equalBssid': 1, 'always': 2.

This object indicates that EAP Response packets are converted to those with specific MAC addresses.

This object indicates the delay for re-enabling LLDP. The default value is 2. It is expressed in seconds.

This object indicates the operation mode of LLDP. The default value is 1. Enumeration: 'rx': 2, 'tx': 3, 'txrx': 1.

This object indicates the message retransmitting delay. The default value is 2. It is expressed in seconds.

This object indicates the hold time multiplier of device information on neighbors (cardinal number is the interval time). The default value is 4.

This object indicates the interval at which LLDP packets are sent. The default value is 30 seconds.

This object indicates the interval at which LLDP packets are reported. The default value is 30 seconds.

This object indicates the access mode. The default value is 1. Enumeration: 'blacklist': 2, 'unknown': -1, 'whitelist': 3, 'disable': 1.

This object indicates blacklist and whitelist profiles.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE: notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.

This object indicates whether to enable the SFTP. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the aging time of the dynamic blacklist entries. The default value is 300.

Description. Enumeration: 'combine': 1, 'split': 2.

This object indicates of mpp active reselection. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, the IPv4 address 255.255.255.255 is used.

This object indicates the IPv6 address of the spectrum analysis server. You choose an IPv4 or IPv6 address. By default, it is not configured.

This object indicates the port of the spectrum analysis server. The default value is 0.

This object indicates the status of the spectrum analysis function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the port number used by the AP to report spectrum analysis data to the AC. The default value is 0.

This object indicates the aging time of non-WLAN devices on the AC. The default value is 3 minutes.

This object indicates the maximum output power of the AP.The default value is 750000.

This object indicates the percentage of reserved PoE power to the available PoE power.The default value is 255.

This object indicates the alarm threshold of PoE power consumption percentage.The default value is 255.

This object indicates whether to enable the IEEE 802.3at-compliant device to provide power in accordance with IEEE 802.3af.The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates whether to enable the device to allow high inrush current during power-on.The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the IP address of the primary AC.

This object indicates the IPv6 address of the primary AC.

This object indicates the IP address of the backup AC.

This object indicates the IPv6 address of the backup AC.

This object indicates whether to make a configured Led off time range effective.

This object indicates whether to enable the USB. The default value is 1. Enumeration: 'enable5w': 3, 'enable': 2, 'disable': 1.

This object indicates whether to enable the arp broadcast suppression.The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the threshold of arp broadcast suppression. The default value is 256.

This object indicates whether to enable the igmp broadcast suppression.The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the threshold of igmp broadcast suppression. The default value is 256.

This object indicates whether to enable the nd broadcast suppression.The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the threshold of nd broadcast suppression. The default value is 256.

This object indicates whether to enable the other broadcast suppression.The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the threshold of other broadcast suppression. The default value is 256.

This object indicates whether to enable all the broadcast suppression.The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the DTLS function of data-link. The default value is 3. Enumeration: 'notconfig': 3, 'enable': 2, 'disable': 1.

This object indicates the psk of the AP-based offline VAP.

This object indicates the mode of the ac protect link-switch. The default value is 1. Enumeration: 'priority': 1, 'networkstabilization': 2.

This object indicates the time of echo probe. The default value is 20.

This object indicates the start threshold of packet-loss rate. The default value is 20.

This object indicates the gap threshold of packet-loss rate. The default value is 15.

Description. Enumeration: 'ethernet': 2, 'serial': 1.

This object indicates whether to enable the lldp report .The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the type of dhcpve option12 .The default value is 1. Enumeration: 'apName': 2, 'apTypeApMac': 1, 'disable': 3.

This object indicates the value of broadcast value .The default value is 256.

This object indicates the value of multicast value .The default value is 256.

This object indicates the value of unicast value .The default value is 256.

This object indicates the type of ble console .The default value is 2. Enumeration: 'disable': 1, 'dynamic': 2, 'persistent': 3.

This object indicates the AP disk usage rate alarm threshold. The default value is 95.

This object indicates syslog server port. The default value is 514.

This object indicates whether to disable the Station Connectivity Detect. The default value is enable. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the mode of the station arp-nd-proxy before association .The default value is 1. Enumeration: 'yes': 2, 'no': 1.

This object indicates the switch of the unicast-suppression auto detect .The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the AP PKI certificate file type. Enumeration: 'pem': 1, 'invalid': 255, 'pkcs12': 2.

This object indicates the AP PKI certificate filename.

This object indicates the AP PKI certificate file password.

Description.

Description.

Description.

Description.

Description.

Description.

This object indicates whether to enable the NP fast forwarding function. The default value is 1. Enumeration: 'enable': 1, 'disable': 2.

This object indicates whether to enable the NP capwap reassembly function. The default value is 1. Enumeration: 'enable': 1, 'disable': 2.

This object indicates the radio mode for AP. The default value is 255. Enumeration: 'threeRadio': 4, 'twoRadioStandard': 1, 'default': 255, 'twoRadioIndependentScan': 5, 'twoRadio2gEnhanced': 3, 'twoRadio5gEnhanced': 2.

This object indicates the force workmode of power. The default value is 255. Enumeration: 'bt90': 4, 'bt60': 3, 'at': 2, 'invalid': 255, 'af': 1.

This table is used to create or delete an AP wired port link profile and modify or query attributes.

The index of this table is hwAPWiredPortProfileName.

This object indicates the name of an AP wired port link profile.

This object indicates the bound AP wired port link profile.

This object indicates the description of an interface.

This object indicates the ID of a Trunk. 0 is valid and 0xFFFFFFFF is invalid. The default value is 0xFFFFFFFF.

This object indicates whether to enable STP on wired ports. The default value is 3. Enumeration: 'auto': 3, 'enable': 2, 'disable': 1.

This object indicates the mode of the wired port. the default value is 256. Enumeration: 'middle': 3, 'null': 256, 'endpoint': 2, 'root': 1.

This object indicates the PVID of a port. The default value is 1.

This object indicates whether to tag ports with VLAN IDs. The default value is 0.

This object indicates whether to untag VLAN IDS from ports. The default value is 1.

This object indicates the status of the user isolation function. The default value is 1. Enumeration: 'disable': 1, 'l2Isolate': 3, 'l3Isolate': 2.

This object indicates whether a port is configured as a DHCP trusted port. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates whether a port is configured as a ND trusted port. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.

This object indicates whether to enable ipv4 address learning.The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates whether to enable IP packet checking against the binding table.The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates whether to enable ARP packet checking against the binding table.The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates whether to enable STP-triggered port shutdown.The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the automatic port recovery time after an STP-triggered shutdown.The default value is 600.

This object indicates the rate limit for broadcast storm suppression.The default value is 0xFFFFFFFF.

This object indicates the rate limit for unknown unicast storm suppression.The default value is 0xFFFFFFFF.

This object indicates the rate limit for multicast storm suppression.The default value is 0xFFFFFFFF.

This object indicates whether to enable IGMP-snooping.The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates whether to enable ipv6 address learning.The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates whether to enable MLD-snooping.The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

Description.

This object indicates the status of the port security function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the max number of the port security mac. The default value is 1.

This object indicates the status of the port security sticky mac function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the protect action of the port security function. The default value is 1. Enumeration: 'restrict': 1, 'protect': 2.

This object indicates whether to config port forward mode.The default value is direct forward. Enumeration: 'tunnel': 2, 'directForward': 1.

This object indicates the bound dot1x client profile.

This object indicates whether to enable Loopback detection on wired ports. The default value is disable(1). Enumeration: 'enable': 2, 'disable': 1.

This table is used to configure ACL-based packet filtering in an AP wired port profile.

Indexes of this table are hwAPWiredPortProfileName.

This object indicates the direction of the ACL-based packet filtering. Enumeration: 'inbound': 1, 'outbound': 2.

This object indicates the type of the ACL-based packet filtering. Enumeration: 'l2': 3, 'ipv4': 1, 'ipv6': 2.

This object indicates ACL rules for packet filtering.

This object indicates packet filtering rules configured on the wired interface.

This table is used to create or delete an AP wired port link profile and configure parameters.

The index of this table is hwAPPortLinkProfileName.

This object indicates the name of an AP wired port link profile.

This object indicates the status of the LLDP function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the types of TLVs that can be advertised from an AP's wired port. The default value is all(31) ? 0: invalid ? bit0: management-address ? bit1: port-description ? bit2: system-capability ? bit3: system-description ? bit4: system-name.

This object indicates the status of the CRC error alarm function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates a CRC error alarm threshold. The default value is 50. The unit is 1/10000.

This object indicates a CRC error alarm clearing threshold. The default value is 20. The unit is 1/10000.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined ? ROWSTATUS_ACTIVE: active ? ROWSTATUS_NOTINSERVICE:notInService ? ROWSTATUS_NOTREADY: notReady ? ROWSTATUS_CREATEANDFLOW: createAndGo ? ROWSTATUS_CREATEANDWAIT: createAndWait ? ROWSTATUS_DESTROY: destroy.

This object indicates whether to enable the PoE function on the interface.The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the power priority of PoE interfaces.The default value is 3. Enumeration: 'high': 2, 'critical': 1, 'low': 3.

This object indicates whether to enable forcible PoE power supply on an interface.The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates whether to enable the PSE to check compatibility of the connected PDs.The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates whether to make a configured PoE power-off time range effective on interfaces.

This object indicates whether to enable port shutdown.The default value is 2. Enumeration: 'down': 1, 'up': 2.

Description.

Description. Enumeration: 'default': 1, 'bt': 4, 'ab': 2, 'at': 3.

Description.

This object indicates whether to enable the Power Capability.The default value is 1. Enumeration: 'enable': 1, 'disable': 2.

Configure the speed of AP interface.

This table is used to configure 2.4 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan and RRM profiles.

The index of this table is hw2gRadioProfileName.

This object indicates the name of a 2G radio profile. It is the index of the table.

This object indicates a Beacon interval. The default value is 100. It is expressed in ms.

This object indicates the GI mode. The default value is 1. Enumeration: 'short': 1, 'normal': 2.

This object indicates the preamble mode. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes.

This object indicates the status of the aggregation function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes ? 1: 16383 bytes ? 2: 32767 bytes ? 3: 65535 bytes.

This object indicates the basic rate set of the 802.11bg protocol. The default value is 3 ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? bit5: 11 Mbit/s ? bit6: 12 Mbit/s ? bit7: 18 Mbit/s ? bit8: 24 Mbit/s ? bit9: 36 Mbit/s ? bit10: 48 Mbit/s ? bit11: 54 Mbit/s.

This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFFF ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s ? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.

This object indicates the multicast rate. The default value is 0x2F ? bit0: 1 Mbit/s ? bit1: 2 Mbit/s ? bit2: 5.5 Mbit/s ? bit3: 6 Mbit/s ? bit4: 9 Mbit/s ? bit5: 11 Mbit/s ? bit6: 12 Mbit/s ? bit7: 18 Mbit/s ? bit8: 24 Mbit/s ? bit9: 36 Mbit/s ? bit10: 48 Mbit/s ? bit11: 54 Mbit/s.

This object indicates the status of the mandatory WMM matching function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 2.

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us.

This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1. Enumeration: 'noAck': 2, 'normal': 1.

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us.

This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1. Enumeration: 'noAck': 2, 'normal': 1.

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 6.

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.

This object indicates the EDCA parameter TXOPLimit for BE services on APs. It indicates the transmission opportunity limit. The default value is 0. The unit is 32 us.

This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1. Enumeration: 'noAck': 2, 'normal': 1.

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 10.

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7.

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us.

This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1. Enumeration: 'noAck': 2, 'normal': 1.

This object indicates the status of the WMM function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 1400(from V2R8C10; The default value is 2347 before V2R8C10.). It is expressed in bytes.

This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3(from V2R8C10; The default value is 2 before V2R8C10.). Enumeration: 'disable': 1, 'ctsToSelf': 2, 'rtsCts': 3.

This object indicates the status of the user-by-user power control function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the beamforming function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. Enumeration: 'signalStrength': 1, 'traffic': 2.

This object indicates the status of the channel switchover announcement function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the channel switch announcement mode. The default value is 1. Enumeration: 'continueTransmitting': 1, 'stopTransmitting': 2.

This object indicates the status of the scheduled radio disabling function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.

This object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.

This object indicates the status of the user-by-user power control function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.

This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.

This object indicates the alarm threshold for station interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC.The default value is 32.

This object indicates the bound RRM profile.

This object indicates the bound air scan profile.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used ? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.

This object indicates the switch for the function of sending packets at maximum power, the default value is 2(auto). Enumeration: 'auto': 2, 'enable': 3, 'disable': 1.

This object indicates the type of radio. The default value is 17. Enumeration: 'dot11g': 5, 'dot11n': 9, 'dot11b': 1, 'dot11ax': 17.

This object indicates the status of the smart antenna switch. The default value is 1. Enumeration: 'default': 1, 'enable': 2, 'disable': 3.

This object indicates the number of the TX chain. The default value is 4.

This object indicates the number of the RX chain. The default value is 4.

This object indicates the time range for disabling the radio.

This object indicates the status of the agile antenna polarization. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the value of the CCA threshold. The default value is 0.

This object indicates the value of the smart antenna low per threshold. The default value is 20.

This object indicates the value of the smart antenna high per threshold. The default value is 80.

This object indicates the value of the smart antenna training interval. The default value is 0.

This object indicates the value of the smart antenna training MPDU number. The default value is 640.

This object indicates the value of the smart antenna throughput trigger training threshold. The default value is 10.

This object indicates the dot11ax GI mode. The default value is 1. Enumeration: 'gi1dot6': 2, 'gi0dot8': 1, 'gi3dot2': 3.

This object indicates the highway bssid.

This object indicates a autonavigation beacon interval. The default value is 60. It is expressed in ms.

This object indicates the status of a-msdu switch. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the proportion of reserved bandwidth for VIP users. The default value is 20.

This object indicates the status of ru26-tolerance switch. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This table is used to configure 5 GHz radio parameters, including physical radio parameters such as channel, power, antenna gain, and working mode, and bind air scan profiles and RRM profiles.

The index of this table is hw5gRadioProfileName.

This object indicates the name of a 5G radio profile. It is the index of the table.

This object indicates a Beacon interval. The default value is 100. It is expressed in ms.

This object indicates the GI mode. The default value is 1. Enumeration: 'short': 1, 'normal': 2.

This object indicates whether the short preamble is enabled. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the packet fragmentation threshold. The default value is 2346. It is expressed in bytes.

This object indicates the status of the aggregation function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the maximum length of frames converged by an MPDU. The default value is 3 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes ? 3: 65535 bytes.

This object indicates the maximum length of frames converged by an MPDU. The default value is 7 ? 0: 8191 bytes? 1: 16383 bytes? 2: 32767 bytes? 3: 65535 bytes? 4: 131071 bytes? 5: 262143 bytes? 6: 524287 bytes? 7: 1048575 bytes.

This object indicates the status of the A-MSDU aggregation function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the maximum number of sub-frames that can be aggregated into an A-MSDU. The default value is 2.

This object indicates the basic rate set of the 802.11bg protocol. The default value is 0x148 (6 Mbit/s/12 Mbit/s/24 Mbit/s) ? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.

This object indicates the supported rate set of the 802.11bg protocol. The default value is 0xFD8 (6 Mbit/s/9 Mbit/s/12 Mbit/s/18 Mbit/s/24 Mbit/s/36 Mbit/s/48 Mbit/s/54 Mbit/s).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.

This object indicates the multicast rate. The default value is 0x8(6M).? bit0: 1 Mbit/s? bit1: 2 Mbit/s? bit2: 5.5 Mbit/s? bit3: 6 Mbit/s? bit4: 9 Mbit/s? bit5: 11 Mbit/s? bit6: 12 Mbit/s? bit7: 18 Mbit/s? bit8: 24 Mbit/s? bit9: 36 Mbit/s? bit10: 48 Mbit/s? bit11: 54 Mbit/s.

This object indicates the maximum MCS value for 802.11ac radios. The number of spatial flows is 8 and the maximum MCS value is 7-9. The format is x?x?x?x?x?x?x?x. The default value is 9?9?9?9?9?9?9?9.

This object indicates the status of the mandatory WMM matching function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for voice services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 2.

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for voice services on APs. The default value is 1.

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for voice services on APs. The default value is 47. The unit is 32 us.

This object indicates the EDCA parameter AckPolicy for voice services on APs. The default value is 1. Enumeration: 'noAck': 2, 'normal': 1.

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for video services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 3.

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for video services on APs. The default value is 1.

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for video services on APs. The default value is 94. The unit is 32 us.

This object indicates the EDCA parameter AckPolicy for video services on APs. The default value is 1. Enumeration: 'noAck': 2, 'normal': 1.

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 6.

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BE services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BE services on APs. The default value is 3.

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BE services on APs. The default value is 0. The unit is 32 us.

This object indicates the EDCA parameter AckPolicy for BE services on APs. The default value is 1. Enumeration: 'noAck': 2, 'normal': 1.

This object indicates the EDCA parameter ECWmax, namely, exponent form of Cwmax, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 10.

This object indicates the EDCA parameter ECWmin, namely, exponent form of Cwmin, for BK services on APs. ECWmin and ECWmax determine the average backoff time (ECWmax > ECWmin). The default value is 4.

This object indicates the EDCA parameter AIFSN, namely, arbitration interframe spacing number, for BK services on APs. The default value is 7..

This object indicates the EDCA parameter TXOPLimit, namely, transmission opportunity limit, for BK services on APs. The default value is 0. The unit is 32 us.

This object indicates the EDCA parameter AckPolicy for BK services on APs. The default value is 1. Enumeration: 'noAck': 2, 'normal': 1.

This object indicates the status of the WMM function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the request To Send/Clear To Send (RTS/CTS) threshold. If the length of a frame to be sent by the MAC Layer exceeds this threshold, an RTS frame needs to be sent before this frame. The default value is 1400 bytes(from V2R8C10; The default value is 2347 before V2R8C10.).

This object indicates the RTS-CTS mode set for the specified radio profile. The default value is 3(from V2R8C10; The default value is 2 before V2R8C10.). In V200R019C10 and later versions, 2 is not supported and will switch to 3 automatically. Enumeration: 'disable': 1, 'ctsToSelf': 2, 'rtsCts': 3.

This object indicates the status of the user-by-user power control function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the beamforming function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates information reflected by the blinking frequency of the Wireless LED on an AP. The default value is 1 NOTE ? If Mesh is enabled on an AP, the Wireless indicator blinking frequency reflects the signal strength of the AP with the weakest signal among received signals from all neighboring APs.? If WDS is enabled on an AP, the the Wireless indicator blinking frequency reflects the signal strength of the connected WDS AP.? For a Leaf AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP.? For a Middle AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Root AP.? For a root AP, the Wireless indicator blinking frequency reflects the signal strength of the connected Middle AP with the weakest signal.? If WDS or Mesh is not enabled on an AP, the Wireless indicator blinking frequency reflects the service traffic volume on the radio. Enumeration: 'signalStrength': 1, 'traffic': 2.

This object indicates the status of the channel switchover announcement function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the channel switch announcement mode. The default value is 1. Enumeration: 'continueTransmitting': 1, 'stopTransmitting': 2.

This object indicates the status of the scheduled radio disabling function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the start time for disabling the radio. The value is in the format of hh:mm:ss NOTE ? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59..

This object indicates the end time for disabling of the radio. The value is in the format of hh:mm:ss. NOTE? hh specifies the hour. The value is an integer that ranges from 0 to 23.? mm specifies the minute. The value is an integer that ranges from 0 to 59.? ss specifies the second. The value is an integer that ranges from 0 to 59.

This object indicates the status of the user-by-user power control function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the alarm threshold for co-channel interference, namely, the percentage of the co-channel interference power against the maximum power. The default value is 50.

This object indicates the alarm threshold for adjacent-channel interference, namely, the percentage of the adjacent-channel interference power against the maximum power. The default value is 50.

This object indicates the alarm threshold for adjacent-channel interference. When the number of the STAs detected exceeds the specified alarm threshold, the AP reports alarms to the AC. The default value is 32.

This object indicates the bound RRM profile.

This object indicates the bound air scan profile.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.

This object indicates the switch for the function of sending packets at maximum power, the default value is 2(auto). Enumeration: 'auto': 2, 'enable': 3, 'disable': 1.

This object indicates the type of radio. The default value is 16. Enumeration: 'dot11n': 6, 'dot11ac': 14, 'dot11a': 2, 'dot11ax': 16.

This object indicates the status of the smart antenna switch. The default value is 1. Enumeration: 'default': 1, 'enable': 2, 'disable': 3.

This object indicates the status of the MU MIMO switch. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the number of the TX chain. The default value is 4.

This object indicates the number of the RX chain. The default value is 4.

This object indicates the time range for disabling the radio.

This object indicates the status of the agile antenna polarization. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the value of the CCA threshold. The default value is 0.

This object indicates the value of the smart antenna low per threshold. The default value is 20.

This object indicates the value of the smart antenna high per threshold. The default value is 80.

This object indicates the value of the smart antenna training interval. The default value is 0.

This object indicates the value of the smart antenna training MPDU number. The default value is 640.

This object indicates the value of the smart antenna throughput trigger training threshold. The default value is 10.

This object indicates the dot11ax GI mode. The default value is 1. Enumeration: 'gi1dot6': 2, 'gi0dot8': 1, 'gi3dot2': 3.

This object indicates the highway bssid.

This object indicates a autonavigation beacon interval. The default value is 60. It is expressed in ms.

This object indicates the proportion of reserved bandwidth for VIP users. The default value is 20.

This object indicates the status of ru26-tolerance switch. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This table is used to configure radio resource management parameters, including parameters related to band steering, dynamic load balancing, smart roaming, and UAC.

The index of this table is hwRrmProfileName.

This object indicates the name of the RRM profile. It is the index of the table.

This object indicates the status of the automatic channel selection function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the automatic power selection function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicate the error packet threshold triggering the automatic channel or power selection function. The default value is 60. It is expressed in percentage.

This object indicates the status of the airtime scheduling function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the dynamic EDCA parameter adjustment function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the rejecting access from terminals with weak signals function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the SNR threshold for rejecting access from terminals. The default value is 15(from V2R8C10; The default value is 20 before V2R8C10.). The value ranges from 5 to 25 from V200R010C00 and 5 to 75 before V200R010C00. It is expressed in dB.

This object indicates the status of the UAC policy function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the UAC policy. The default value is 1. Enumeration: 'unknown': 255, 'users': 1, 'channelUtilization': 2.

This object indicates the user CAC access threshold based on the number of users. If the number of online users reaches the threshold after a new user goes online, the AP will reject access requests of other new users. The default value is 64.

This object indicates the user CAC roaming threshold based on the number of users. When a user roams to an AP, the AP checks whether the current number of online users reaches the roaming threshold. If so, the AP denies access of the user.The default value is 64.

This object indicates the disposal method when the value of UAC reaches the specified threshold. The default value is 1. Enumeration: 'replaceBasedOnPriority': 3, 'hideSSID': 2, 'advertiseSSID': 1.

This object indicates the maximum number of times the band steering function rejects association requests from terminals. The default value is 0.

This object indicates the minimum number of terminals for triggering inter-band load balancing. The default value is 100.

This object indicates the percentage threshold for access STAs on the 5 GHz radio. The default value is 90.

This object indicates the expiration condition for records of terminal supported bands. If the AP continuously receives probe messages from a terminal on the same band and the number of received probe messages exceeds the specified threshold, the records of terminal supported bands will be updated and the AP will consider that the terminal supports only this band. The default value is 35.

This object indicates the status of the load balancing group function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the percentage of terminals for triggering load balancing. The default value is 10. It is expressed in percentage.

This object indicates the load difference threshold for triggering load balancing, which is expressed in the number of terminals. The default value is 10.

This object indicates the maximum number of times the load balancing function rejects association requests from terminals. The default value is 3.

This object indicates whether STA active roaming is triggered by rate check or SNR check.The values are as follows:? 1: checkSnr? 2: checkRate? 3: checkAll. Enumeration: 'checkAll': 3, 'checkRate': 2, 'checkSnr': 1.

This object indicates the status of the smart roaming function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the SNR threshold for triggering the smart roaming function. The default value is 20 dB.

This object indicates the rate threshold for triggering the smart roaming function. It is expressed in the percentage against the maximum rate supported by the terminal. The default value is 0. It is expressed in percentage.

This object indicates the upper SNR difference threshold for triggering smart roaming. The default value is 15. It is expressed in dB.

This object indicates the lower SNR difference threshold for triggering smart roaming. The default value is 6. It is expressed in dB.

This object indicates the terminal SNR detection interval for smart roaming. The default value is 3. It is expressed in s.

This object indicates the aging time of records that terminals are unable to roam. The default value is 120. It is expressed in minutes.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.

This object indicates the user CAC access threshold based on the channel utilization. If the channel utilization reaches the threshold after a new user goes online, the AP will reject access requests of other new users.The default value is 80, in percentage.

This object indicates the user CAC roaming threshold based on the channel utilization. When a user roams to an AP, the AP checks whether the current channel utilization reaches the roaming threshold. If so, the AP denies access of the user.The default value is 80, in percentage.

Smart roam quick-kickoff rate threshold

Smart roam quick-kickoff SNR threshold

This object indicates the start SNR threshold for triggering 5G-prior access. The default value is 20, in dB.

This object indicates the mode for load balancing in a static load balancing group. Enumeration: 'staNumber': 1, 'channelUtilization': 2.

This object indicates the load difference threshold of a static load balancing group in channel-utilization mode.

This object indicates the start threshold for load balancing in a static load balancing group in channel-utilization mode.

Calibrate TPC coverage threshold.

Calibrate maximum TX power.

Calibrate minimum TX power.

Calibrate nose-floor threshold.

This object indicates whether DFS smart selection is enabled. By default, this function is enabled. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the delay in switching back the DFS channel.

This object indicates the interval for checking the SNR to determine whether to quickly disconnect STAs. The default value is 500, in milliseconds.

Description.

Description.

Description.

Description.

This object indicates the load balance rssi threshold.

This object indicates sfn roam check high-threshold .

This object indicates sfn roam check low-threshold .

This object indicates sfn roam check cumulative RSSI change threshold .

This object indicates sfn roam check Sta HoldingTimes .

This object indicates sfn roam check gap rssi Threshold.

This object indicates sfn roam check Better Snr Times.

This object indicates sfn roam check Decision Interval .

This object indicates sfn roam check Snr Report Interval

This object indicates multimedia optimized edca. Enumeration: 'enable': 2, 'disable': 1.

This object indicates high density AMC optimize switch. Enumeration: 'enable': 2, 'disable': 1.

This object indicates multimedia optimized edca adaptive voice threshold.

This object indicates multimedia optimized edca adaptive video threshold.

This object the status of the smart roam quick-kickoff function. The default value is 2 except the Fat AP. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the check mode for determining whether to quickly disconnect STAs. The default value is 1. Enumeration: 'checkAll': 3, 'checkRate': 2, 'checkSnr': 1.

This object indicates the load difference threshold for triggering dynamic load balancing based on the number of STAs. The value 0 indicates that load balancing is based on the percentage of STAs.

This object indicates the interval for reporting Probe frames. The default value is 120, in seconds.

This object indicates the number of attempts to steer STAs in Deauthentication mode. The default value is 0.

This object indicates the number of attempts to steer STAs in BTM mode. The default value is 5.

This object indicates the time for suppressing STA association with non-target APs during STA steering. The default value is 5, in seconds.

This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 5.

This object indicates the number of times non-target APs suppress STA Probe frames during STA steering. The default value is 0.

This object indicates the threshold of the RSSI gap between the associated radio and target radio. The default value is 5, in dB..

This object indicates the switch of advanced scan. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the back-off time of kick off.

This object indicates the restrict threshold of edca.

Calibrate 5g maximum TX power.

Calibrate 5g minimum TX power.

This object indicates the status of the tpc request function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the link measurement function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the interference immune function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the bss color function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the spatial reuse function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This table is used to configure air scan intervals, duration, and scan channel sets.

The index of this table is hwAirScanProfileName.

This object indicates the name of an air scan profile. It is the index of the table.

This object indicates the air scan period. The default value is 60. It is expressed in ms.

This object indicates the scan interval. The default value is 10000. The unit is 1ms.

This object indicates the scan channel set. The default value is 1. Enumeration: 'countryChannel': 1, 'workChannel': 3, 'dcaChannel': 2.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.

This object indicates the voice aware set. The default value is enable. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the video aware set. The default value is enable. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the scan switch status. The default value is enable. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the scan enhancement status. The default value is disable. Enumeration: 'enable': 2, 'disable': 1.

This table is used to configure and query VAP profile parameters.

The index of this table is hwVapProfileName.

This object indicates the name of a VAP profile. It is the index of the table.

This object indicates the service forwarding mode. The default value is 2. Enumeration: 'tunnel': 3, 'unknown': 1, 'softgre': 4, 'directForward': 2.

This object indicates the format of packets forwarded by tunnel. The default value is 0xd.? bit0: dot1x? bit1: dhcp? bit2: http? bit3: wapi? bit4: mdns.

This object indicates the status of the VAP service function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the start time of VAP profile. The format is HH:MM:SS.

This object indicates the end time of VAP profile. The format is HH:MM:SS.

If this parameter is set to 2, the VAP automatically becomes the management VAP for offline APs after the AP is disconnected. It can still send signals so that maintenance personnel can access it to identify faults (the security mode is the non-authentication security mode and the SSID will be hidden). The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the service VLAN for the VAP. The default value is 1.

This object indicates the VLAN pool to which the VAP is bound.

This object indicates the VAP type. The default value is 1. Enumeration: 'managementAc': 3, 'serviceNaviAc': 6, 'service': 1, 'radiusdownBackup': 5, 'serviceBackupApOffline': 4, 'managementAp': 2, 'managementLeaderAp': 7.

This object indicates the access mode. The default value is 1. Enumeration: 'blacklist': 2, 'whitelist': 3, 'disable': 1.

This object indicates blacklist and whitelist profiles.

This object indicates the tunnel endpoint for inter-Layer 3 roaming. The default value is 1.. Enumeration: 'ap': 1, 'ac': 2.

This object indicates the VLAN group for roaming. For the same VLAN, if the VAP is in different VLAN groups for roaming, the roaming is also inter-Layer 3 roaming. The default value is 1..

This object indicates the status of the Layer 3 roaming function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the band steering function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the IPv4 address learning function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the IPv6 address learning function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the strict address learning (only through the DHCP) function. The default value is 1. Enumeration: 'enableBlacklist': 3, 'enable': 2, 'disable': 1.

This object indicates the status of the IP binding relationship check function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the ARP binding relationship check function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the function of appending the Option 82 field to DHCP messages. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the format of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 1. Enumeration: 'apName': 4, 'apLocationSsid': 7, 'apNameSsid': 5, 'userDefined': 3, 'apLocation': 6, 'apMac': 1, 'apMacSsid': 2.

This object indicates the status of the radio interface DHCP trust function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the radio interface ND trust function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

The object indicates the security profile that is bound to the VAP. The default value is default.

The object indicates the traffic profile that is bound to the VAP. The default value is default.

The object indicates the SSID profile that is bound to the VAP. The default value is default.

The object indicates the authentication profile that is bound to the VAP. The default value is default.

The object indicates the SAC profile that is bound to the VAP.

This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROWSTATUS_NOTINSERVICE: notInService? ROWSTATUS_NOTREADY: notReady? ROWSTATUS_CREATEANDFLOW: createAndGo? ROWSTATUS_CREATEANDWAIT: createAndWait? ROWSTATUS_DESTROY: destroy.

The object indicates the user profile that is bound to the VAP.

The object indicates the Hotspot2.0 profile that is bound to the VAP.

The object indicates the Softgre profile that is bound to the VAP.

This object indicates the user-defined format of remote-id(RID) in the Option 82 field to DHCP messages.

This object indicates the AP MAC address format of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 0. Enumeration: 'default': 0, 'compact': 2, 'hex': 3, 'normal': 1.

This object indicates the format of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 1. Enumeration: 'apName': 4, 'apLocationSsid': 7, 'apNameSsid': 5, 'userDefined': 3, 'apLocation': 6, 'apMac': 1, 'apMacSsid': 2.

This object indicates the user-defined format of circuit-id(CID) in the Option 82 field to DHCP messages.

This object indicates the AP MAC address format of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 0. Enumeration: 'default': 0, 'compact': 2, 'hex': 3, 'normal': 1.

The object indicates the UCC profile that is bound to the VAP.

This object indicates the status of the VAP anti-attack braoadcast flood function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the anti-attack braoadcast flood sta-rate-threshold for the VAP. The default value is 10.

This object indicates the status of the VAP anti-attack braoadcast flood blacklist function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the strict address learning (only through the DHCPv6) function. The default value is 1. Enumeration: 'enableBlacklist': 3, 'enable': 2, 'disable': 1.

This object indicates the status of the VAP anti-attack ARP flood function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the anti-attack ARP flood sta-rate-threshold for the VAP. The default value is 5.

This object indicates the status of the VAP anti-attack ARP flood blacklist function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the VAP anti-attack ND flood function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the anti-attack ND flood sta-rate-threshold for the VAP. The default value is 16.

This object indicates the status of the VAP anti-attack ND flood blacklist function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the VAP anti-attack IGMP flood function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the anti-attack IGMP flood sta-rate-threshold for the VAP. The default value is 4.

This object indicates the status of the VAP anti-attack IGMP flood blacklist function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

The object indicates the Defence profile that is bound to the VAP.

The object indicates the TimeRange .

This object indicates the PermitVlanList. The default value is 0.

This object indicates the status of the SFN Roam function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of sta network reachable detect function. The default value is 2. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the IPv4 address conflict check function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of the IPv6 address conflict check function. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the name of radius-server template.

This object indicates the state of the radiusdownBackup vap. Enumeration: 'on': 2, 'off': 1, 'invalid': 3.

This object indicates the mode of the switch which triges vap on or off. Enumeration: 'auto': 2, 'manual': 1, 'invalid': 3.

This object indicates the state of radius server. Enumeration: 'down': 2, 'up': 1, 'invalid': 3.

This object indicates the status of vap keep service function. The default value is 2. Enumeration: 'allowAccessAlsoNoauth': 4, 'enable': 1, 'allowaccess': 3, 'disable': 2.

This object indicates the AC index.

This object indicates the wlan index.

This object indicates the status of vap highway status. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of service experience analysis. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates SIP snooping port. The default value is 5060.

This object indicates whether to enable autonavigation roaming optimization. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the status of vap MDNS policy on local ac. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the switch of MDNS snooping. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates configure of split tunnel ACL.

This object indicates configure of split tunnel IPv6 ACL.

This object indicates the zone name of vap.

This object indicates the radio that vap takes effect. The default value is 0.

This object indicates the trigger mode of sending MU-BA. The default value is 2. Enumeration: 'mubar': 2, 'basictrigger': 1.

This object indicates the switch of dynamic flow inspection. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the switch of iconnect. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This table is used to configure and query SSID profile parameters.

The index of this table is hwSsidProfileName.

This object indicates the name of a SSID profile. It is the index of the table.

This object indicates the SSID character string. The default value is HUAWEI-WLAN.

This object indicates whether to enable SSID hiding. The default value is 1. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the association timeout period of a user. The default value is 5 minutes.

The object indicates the number of access users on a VAP. The default value is 64.

This object indicates whether to allow access from legacy terminals. The default value is 2. Enumeration: 'enable': 2, 'disable': 1, 'onlyDot11bDisable': 3.

This object indicates the DTIM interval. The default value is 1.

This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VO queue on the station. The default value is 3.

This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VO queue on the station. The default value is 2.

This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VO queue on the station. The default value is 2. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.

This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VO queue on the station. The default value is 47.

This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_VI queue on the station. The default value is 4.

This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_VI queue on the station. The default value is 3.

This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_VI queue on the station. The default value is 2. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.

This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_VI queue on the station. The default value is 94.

This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BE queue on the station. The default value is 10.

This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BE queue on the station. The default value is 4.

This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BE queue on the station. The default value is 3. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.

This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BE queue on the station. The default value is 0.

This object indicates the ECWmax value, which determines the average avoidance time. The value of this object is the ECWmax value of the AC_BK queue on the station. The default value is 10.

This object indicates the ECWmin value, which determines the average avoidance time. The value of this object is the ECWmin value of the AC_BK queue on the station. The default value is 4.

This object indicates the AIFSN value, which determines the idle waiting time. The value of this object is the AIFSN value of the AC_BK queue on the station. The default value is 7. In V200R019C10 and later versions, 1 is not supported and will switch to 2 automatically.

This object indicates the TXOPLimit value, which determines the time for occupying the channel. The value of this object is the TXOPLimit value of the AC_BK queue on the station. The default value is 0.

This object indicates the inbound committed information rate (CIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.

This object indicates the inbound peak information rate (PIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.

This object indicates the inbound committed burst size (CBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.

This object indicates the inbound peak burst size (PBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.

This object indicates the outbound committed information rate (CIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.

This object indicates the outbound peak information rate (PIR) of the SSID. The default value is 0 kbit/s. Invalid value is 1 to 63.

This object indicates the outbound committed burst size (CBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.

This object indicates the outbound peak burst size (PBS) of the SSID. The default value is 0 bytes. Invalid value is 1 to 1499.

Description.

This object indicates the disposal method when the number of stations reaches the specified threshold. The default value is 2. Enumeration: 'replaceBasedOnPriority': 3, 'hideSSID': 2, 'advertiseSSID': 1.

Description. Enumeration: 'twelve': 12, 'fortyeight': 48, 'twentyfour': 24, 'thirtysix': 36, 'six': 6, 'two': 2, 'one': 1, 'eleven': 11, 'eighteen': 18, 'nine': 9, 'five': 5, 'fiftyfour': 54.

Description. Enumeration: 'twelve': 12, 'fortyeight': 48, 'twentyfour': 24, 'thirtysix': 36, 'six': 6, 'eighteen': 18, 'nine': 9, 'fiftyfour': 54.

Description. Enumeration: 'enable': 2, 'disable': 1.

Description.

Description. Enumeration: 'enable': 2, 'disable': 1.

Description. Enumeration: 'enable': 2, 'disable': 1.

Description. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the switch of 802.11r. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the mode of 802.11r. Enumeration: 'unknown': 0, 'overtheair': 1, 'overtheds': 2.

This object indicates the reassociate timeout of 802.11r.

This object indicates the qbss load switch of VAP. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the single txchain switch of VAP. Enumeration: 'enable': 2, 'disable': 1.

Description. Enumeration: 'enable': 2, 'disable': 1.

Description. Enumeration: 'enable': 2, 'disable': 1.

This object indicates the service guarantee switch of VAP. Enumeration: 'reliabilityFirst': 2, 'performanceFirst': 1.