HUAWEI-VSQMCBB-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-VSQMCBB-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HUAWEI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwVsqm 1.3.6.1.4.1.2011.6.160
This mib is used for defining VSQM statistic objects.
         hwVsqmObjects 1.3.6.1.4.1.2011.6.160.1
             hwMonitorThresholdCfgTable 1.3.6.1.4.1.2011.6.160.1.1
                 hwMosThreshold 1.3.6.1.4.1.2011.6.160.1.1.1 integer32 read-write
Indicates Mos Threshold. 0~50 indicate the voice quality. The Mos value is more, the voice quality is better. 127 indicate the invalid value. Default: 35 Unit: 1/10
                 hwJitterThreshold 1.3.6.1.4.1.2011.6.160.1.1.2 unsigned32 read-write
Indicates the threshold of network jitter. Default: 60 Unit: millisecond
                 hwPacketLossThreshold 1.3.6.1.4.1.2011.6.160.1.1.3 unsigned32 read-write
Indicates the threshold of packet loss rate in the network. Default: 50 Unit: 1/1000
                 hwLoopDelayThreshold 1.3.6.1.4.1.2011.6.160.1.1.4 unsigned32 read-write
Indicates the threshold of loop delay. Default: 400 Unit: millisecond
                 hwPacketDiscardThreshold 1.3.6.1.4.1.2011.6.160.1.1.5 unsigned32 read-write
Indicates the threshold of discard packets by JitterBuffer. Default: 1 Unit: 1/1000
             hwThresholdMonitorCtrlTable 1.3.6.1.4.1.2011.6.160.1.2
                 hwThresholdMonitorTime 1.3.6.1.4.1.2011.6.160.1.2.1 unsigned32 read-write
Indicates Threshold Monitor Time. 0 means never time out. Default: 1440 Unit: minute
                 hwThresholdMonitorResidualTime 1.3.6.1.4.1.2011.6.160.1.2.2 integer32 read-only
Indicates the residual time of the Threshold Monitor. -1 means the Threshold Monitor is disable. 0 means never time out. 1~604800: the residual time of the Threshold Monitor. When show, need to change to hour/minute/second. Unit: s
                 hwThresholdMonitorWorstHistoryAgingTime 1.3.6.1.4.1.2011.6.160.1.2.3 unsigned32 read-write
Indicates the aging time of the Threshold Monitor. 1~90: the aging time of the Threshold Monitor. Default: 30 Unit: day
                 hwThresholdMonitorSwitch 1.3.6.1.4.1.2011.6.160.1.2.4 integer read-write
Indicates the Threshold Monitor Switch. Options: 1. enable(1) -enable the Threshold Monitor 2. disbale(2) -disable the Threshold Monitor Enumeration: 'enable': 1, 'disbale': 2.
             hwVsqmWorstHistoryStatisticQueryTable 1.3.6.1.4.1.2011.6.160.1.3 no-access
This table is used to query VSQM worst history statistic. The indexes of this table are hwVsqmWorstHistoryStatisIfIndex, hwVsqmWorstHistoryStatisSeqNo.
                 hwVsqmWorstHistoryStatisticQueryEntry 1.3.6.1.4.1.2011.6.160.1.3.1 no-access
This table is used to query VSQM worst history statistic. The indexes of this entry are hwVsqmWorstHistoryStatisIfIndex, hwVsqmWorstHistoryStatisSeqNo.
                     hwVsqmWorstHistoryStatisIfIndex 1.3.6.1.4.1.2011.6.160.1.3.1.1 unsigned32 no-access
Indicates the shelf/slot/port index.
                     hwVsqmWorstHistoryStatisSeqNo 1.3.6.1.4.1.2011.6.160.1.3.1.2 unsigned32 no-access
Indicates the VSQM satatistic sequence num.
                     hwVsqmWorstHistoryStatisMonitorSecHighSince1970 1.3.6.1.4.1.2011.6.160.1.3.1.3 unsigned32 read-only
Indicates the hight 32 bits of secconds since 1970. MonitorSecHighSince1970 and MonitorSecLowSince1970 all are 0xFFFFFFFF means invalid.
                     hwVsqmWorstHistoryStatisMonitorSecLowSince1970 1.3.6.1.4.1.2011.6.160.1.3.1.4 unsigned32 read-only
Indicates the low 32 bits of secconds since 1970. MonitorSecHighSince1970 and MonitorSecLowSince1970 all are 0xFFFFFFFF means invalid.
                     hwVsqmWorstHistoryStatisLocalIPAddress 1.3.6.1.4.1.2011.6.160.1.3.1.5 ipaddress read-only
Indicates the local IP address. 255.255.255.255 indicates invalid ip address.
                     hwVsqmWorstHistoryStatisLocalUdpPort 1.3.6.1.4.1.2011.6.160.1.3.1.6 unsigned32 read-only
Indicates the local UDP Port.
                     hwVsqmWorstHistoryStatisRemoteIPAddress 1.3.6.1.4.1.2011.6.160.1.3.1.7 ipaddress read-only
Indicates the remote IP address. 255.255.255.255 indicates invalid IP address.
                     hwVsqmWorstHistoryStatisRemoteUdpPort 1.3.6.1.4.1.2011.6.160.1.3.1.8 unsigned32 read-only
Indicates the remote UDP Port.
                     hwVsqmWorstHistoryStatisTotalRecivePacketNum 1.3.6.1.4.1.2011.6.160.1.3.1.9 integer32 read-only
Indicates the total receive packet number. -1 indicates the invalid value.
                     hwVsqmWorstHistoryStatisTotalSendPacketNum 1.3.6.1.4.1.2011.6.160.1.3.1.10 integer32 read-only
Indicates the total send packet number. -1 indicates the invalid value.
                     hwVsqmWorstHistoryStatisCurrentLoopDelay 1.3.6.1.4.1.2011.6.160.1.3.1.11 integer32 read-only
Indicates the current Loop Delay. -1 indicates the invalid value. Unit: millisecond
                     hwVsqmWorstHistoryStatisMeanLoopDelay 1.3.6.1.4.1.2011.6.160.1.3.1.12 integer32 read-only
Indicates the current Loop Delay. -1 indicates the invalid value. Unit: millisecond
                     hwVsqmWorstHistoryStatisCurrentJitter 1.3.6.1.4.1.2011.6.160.1.3.1.13 integer32 read-only
Indicates the current Network Jitter. -1 indicates the invalid value. Unit: millisecond
                     hwVsqmWorstHistoryStatisMeanJitter 1.3.6.1.4.1.2011.6.160.1.3.1.14 integer32 read-only
Indicates the Mean Network Jitter. -1 indicates the invalid value. Unit: millisecond
                     hwVsqmWorstHistoryStatisTotalPacketLossNum 1.3.6.1.4.1.2011.6.160.1.3.1.15 integer32 read-only
Indicates the total Packet Loss Number. -1 indicates the invalid value.
                     hwVsqmWorstHistoryStatisPacketLossRate 1.3.6.1.4.1.2011.6.160.1.3.1.16 integer32 read-only
Indicates the Packet Loss Rate in the interval. -1 indicates the invalid value. Unit: 1/1000
                     hwVsqmWorstHistoryStatisLocSysDiscardPktNum 1.3.6.1.4.1.2011.6.160.1.3.1.17 integer32 read-only
Indicates the total discard Packet Loss Number. -1 indicates the invalid value.
                     hwVsqmWorstHistoryStatisLocDiscardRate 1.3.6.1.4.1.2011.6.160.1.3.1.18 integer32 read-only
Indicates the discard Packet Loss Rate in the interval. -1 indicates the invalid value. Unit: 1/1000
                     hwVsqmWorstHistoryStatisCurrentMosLq 1.3.6.1.4.1.2011.6.160.1.3.1.19 integer32 read-only
Indicates the Mos of listening quality in the interval. -1 indicates the invalid value. Unit: 1/10
                     hwVsqmWorstHistoryStatisCurrentMosCq 1.3.6.1.4.1.2011.6.160.1.3.1.20 integer32 read-only
Indicates the Mos of conversational quality in the interval. -1: indicate the invalid value. Unit: 1/10
                     hwVsqmWorstHistoryStatisMeanMosCq 1.3.6.1.4.1.2011.6.160.1.3.1.21 integer32 read-only
Indicates the Mean Mos of conversational quality in the whole talk. -1: indicate the invalid value. Unit: 1/10
                     hwVsqmWorstHistoryStatisRowStatus 1.3.6.1.4.1.2011.6.160.1.3.1.22 rowstatus read-write
Currently only destory(6) is valid. 1 -active(1) 2 -notInService(2) 3 -notReady(3) 4 -createAndGo(4) 5 -createAndWait(5) 6 -destory(6)