HUAWEI-RSTP-EXT-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-RSTP-EXT-MIB
Download as:   
SNMPv2-CONF, HUAWEI-DEVICE-MIB, HUAWEI-MIB, SNMPv2-SMI, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwRstpExt 1.3.6.1.4.1.2011.5.21
The mib is used for defining the RSTP MIB object. RSTP is used to check the ring network on the user side to prevent the services from being affected. After that, the system checks the ring network on the user side automatically.
       hwRstpMibObject 1.3.6.1.4.1.2011.5.21.1
           hwdot1dStpAdminStatus 1.3.6.1.4.1.2011.5.21.1.1 enabledstatus read-write
Enabling/Disabling Spanning Tree of the Switch Options: 1. enabled(1) 2. disabled(2) Default: disabled(2)
           hwdot1dStpForceVersion 1.3.6.1.4.1.2011.5.21.1.2 integer read-write
Configuring RSTP Operating Mode, RSTP is compatible with STP. If a bridge running STP is in this switched network, this can be used to set RSTP to work in STP compatible mode or RSTP compatible mode. DEFVAL { 2 } Options: 1. stp(0) -indicates the configuring RSTP operating mode is stp 2. rstp(2) -indicates the configuring RSTP operating mode is rstp Enumeration: 'stp': 0, 'rstp': 2.
           hwdot1dStpDiameter 1.3.6.1.4.1.2011.5.21.1.3 integer32 read-write
Configuring Diameter of the Switched Network, Switched network is a loop-free tree structure in which any two PCs are connected by a series of bridges. Network diameter refers to the path with the most bridges. It is denoted by the number of bridges on the path.
           hwdot1dStpRootBridgeAddress 1.3.6.1.4.1.2011.5.21.1.4 macaddress read-only
MAC Address of the root bridge.
           hwdot1dStpPortXTable 1.3.6.1.4.1.2011.5.21.1.5 no-access
This table describes rstp port expand table, The index of this table is is not supported.
               hwdot1dStpPortXEntry 1.3.6.1.4.1.2011.5.21.1.5.1 no-access
This table describes rstp port expand table, The index of this entry is is not supported.
                   hwdot1dStpPortAdminStatus 1.3.6.1.4.1.2011.5.21.1.5.1.1 enabledstatus read-write
Enabling/Disabling Spanning Tree on the Port The spanning tree can be disabled on specified Ethernet port to forbid these ports participating in spanning tree calculation.
                   hwdot1dStpPortEdgeport 1.3.6.1.4.1.2011.5.21.1.5.1.2 truthvalue read-write
Configuring specified port to be EdgePort, If the current Ethernet port is not connected with any Ethernet port of other bridges, this port should be configured as EdgePort to enable it to enter forwarding state directly without the unnecessary transition. If the specified port that is connected with the port of other bridges, RSTP will automatically detect and reconfigure it as non-EdgePort
                   hwdot1dStpPortPointToPoint 1.3.6.1.4.1.2011.5.21.1.5.1.3 integer read-write
Configuring the Port to Connect Point-to-Point Link, The two ports connected via the Point-to-Point link can enter the forwarding state rapidly by transmitting synchronous packets, so that unnecessary forwarding delay can be avoided. If the configuration mode for this parameter is set to auto, RSTP can automatically detect if the current Ethernet port is connected with Point-to-Point link. Options: 1. forceTrue(1) -indicates the configuration of the port to connect Point-to-Point link is forceTrue 2. forceFalse(2) -indicates the configuration of the port to connect Point-to-Point link is forceFalse 3. auto(3) -indicates the configuration of the port to connect Point-to-Point link is auto Enumeration: 'forceFalse': 2, 'forceTrue': 1, 'auto': 3.
                   hwdot1dStpMcheck 1.3.6.1.4.1.2011.5.21.1.5.1.4 truthvalue read-write
Configuring mCheck of Specified Port, By configuring mCheck, the user can check if there is the bridge running STP in the network segment connected with the active Ethernet port. If there is, the port will transfer to STP compatible mode. In a stable network, though the bridge running STP has been removed, this port will still work in STP compatible mode. In this case, the port can be forced to RSTP mode by setting the variable mCheck
                   hwdot1dStpTransLimit 1.3.6.1.4.1.2011.5.21.1.5.1.5 integer32 read-write
Configuring Maximum Transmission Speed of Specified Port, The maximum transmission speed of Ethernet port is related to its physical state and network structure. The user can configure it according to the actual network situation.
                   hwdot1dSetStpDefaultPortCost 1.3.6.1.4.1.2011.5.21.1.5.1.6 integer read-write
come back to default path cost of specified port, The path cost of Ethernet port is related to its link speed. The higher the link speed is, the lower the path cost should be configured. When this parameter is set to the default value, RSTP can automatically detect the link speed on the current Ethernet port and transform it to corresponding path cost. Options: 1. enable(1) -indicates default path cost of specified port is enabled Enumeration: 'enable': 1.
           hwdot1dStpPortStatTable 1.3.6.1.4.1.2011.5.21.1.6 no-access
This table describes rstp port statistic table, The index of this table is not supported.
               hwdot1dStpPortStatEntry 1.3.6.1.4.1.2011.5.21.1.6.1 no-access
This table describes rstp port statistic table, The index of this entry is not supported.
                   hwdot1dStpRXStpBPDU 1.3.6.1.4.1.2011.5.21.1.6.1.1 counter32 read-only
Number of STP BPDU Received.
                   hwdot1dStpTXStpBPDU 1.3.6.1.4.1.2011.5.21.1.6.1.2 counter32 read-only
Number of STP BPDU Transmitted.
                   hwdot1dStpRXTCNBPDU 1.3.6.1.4.1.2011.5.21.1.6.1.3 counter32 read-only
Number of TCN BPDU Received.
                   hwdot1dStpTXTCNBPDU 1.3.6.1.4.1.2011.5.21.1.6.1.4 counter32 read-only
Number of TCN BPDU Transmitted.
                   hwdot1dStpRXRSTPBPDU 1.3.6.1.4.1.2011.5.21.1.6.1.5 counter32 read-only
Number of RSTP BPDU Received.
                   hwdot1dStpTXRSTPBPDU 1.3.6.1.4.1.2011.5.21.1.6.1.6 counter32 read-only
Number of RSTP BPDU Transmitted.
                   hwdot1dStpClearStatistics 1.3.6.1.4.1.2011.5.21.1.6.1.7 integer read-write
To clear statistics of Rapid Spanning Tree Protocol (RSTP for short). Options: 1. clear(1) -indicates clearing statistics of Rapid Spanning Tree Protocol Enumeration: 'clear': 1.
           hwRingCheckAdminStatus 1.3.6.1.4.1.2011.5.21.1.7 enabledstatus read-write
Indicates the status of the ring check on the user side. Options: 1. enabled(1) 2. disabled(2) Default: disabled(2)
           hwBpduTunnelAdminStatus 1.3.6.1.4.1.2011.5.21.1.8 enabledstatus read-write
Enabling/Disabling BPDU tunneling function. Options: 1. enabled(1) 2. disabled(2) Default: disabled(2)
           hwRingCheckModeStatus 1.3.6.1.4.1.2011.5.21.1.9 integer read-write
Set ring check mode. Options: 1. private-bpdu(0) -indicates the ring check mode is private-bpdu 2. private-ethtype(1) -indicates the ring check mode is private-ethtype Default: private-bpdu(0) Enumeration: 'private-ethtype': 1, 'private-bpd': 0.
           hwRingCheckPrivateEthtype 1.3.6.1.4.1.2011.5.21.1.10 unsigned32 read-write
Indicates the private Ethernet protocol type of the user-side ring check packet. Range: 1536-65535 Default: 33536
           hwRingCheckResumeInterval 1.3.6.1.4.1.2011.5.21.1.11 integer32 read-write
Indicates the interval time of re-activating the ring check port/ONT/CNU. 0 means to disable the function of automatically re-activating a port/ONT/CNU. 1-1440 indicates the waiting period for the port/ONT/CNU to be automatically re-activated after it is automatically deactivated. Unit: minute Range: 0-1440 Default: 0
           hwRingCheckRecordTable 1.3.6.1.4.1.2011.5.21.1.12 no-access
Used to query the deactivation information of ring check, The index of this table is hwRingCheckRecordIndex.
                 hwRingCheckRecordEntry 1.3.6.1.4.1.2011.5.21.1.12.1 no-access
Used to query the deactivation information of ring check, The index of this entry is hwRingCheckRecordIndex.
                     hwRingCheckRecordIndex 1.3.6.1.4.1.2011.5.21.1.12.1.1 unsigned32 no-access
Indicates the index of a deactivation record.
                     hwRingCheckRecordFrameIndex 1.3.6.1.4.1.2011.5.21.1.12.1.2 integer32 read-only
Indicates the Frame ID of the port/ONT/CNU that is deactivated by ring check.
                     hwRingCheckRecordSlotIndex 1.3.6.1.4.1.2011.5.21.1.12.1.3 integer32 read-only
Indicates the Slot ID of the port/ONT/CNU that is deactivated by ring check.
                     hwRingCheckRecordPortIndex 1.3.6.1.4.1.2011.5.21.1.12.1.4 integer32 read-only
Indicates the Port ID of the port/ONT/CNU that is deactivated by ring check.
                     hwRingCheckRecordOntIndex 1.3.6.1.4.1.2011.5.21.1.12.1.5 integer32 read-only
Indicates the index of the ONT/CNU that is deactivated by ring check.
                     hwRingCheckRecordCountdown 1.3.6.1.4.1.2011.5.21.1.12.1.6 integer32 read-only
Indicates remaining waiting time for automatic activation. -1 indicates that the automatic activation function of ring check is disabled. Unit: minute
           hwRingCheckTrapNotify 1.3.6.1.4.1.2011.5.21.1.13 integer read-write
Indicates the trap notification mode of ring check on the user side. Options: 1. event(1) -indicates the way of trap is event 2. alarm(2) -indicates the way of trap is alarm Default: event(1) Enumeration: 'alarm': 2, 'event': 1.
       hwRingCheckTrapsVbOids 1.3.6.1.4.1.2011.5.21.2
           hwRingCheckRemoteMACAddress 1.3.6.1.4.1.2011.5.21.2.1 macaddress no-access
Indicates the remote Remote mac address.
           hwCnuIndex 1.3.6.1.4.1.2011.5.21.2.2 integer32 no-access
Indicates the CNU ID.
       hwRingCheckTraps 1.3.6.1.4.1.2011.5.21.3
           hwRingCheckAlarmTraps 1.3.6.1.4.1.2011.5.21.3.1
               hwRingCheckAlarmTrapsPrefix 1.3.6.1.4.1.2011.5.21.3.1.0
                   hwRingCheckPortRingTrap 1.3.6.1.4.1.2011.5.21.3.1.0.1
The SNMP trap is generated when the ring topology in the subscriber port is found.
                   hwRingCheckXponPortRingTrap 1.3.6.1.4.1.2011.5.21.3.1.0.2
The SNMP trap is generated when the ring topology in the subscriber xPON port is found.
                   hwRingCheckEocPortRingTrap 1.3.6.1.4.1.2011.5.21.3.1.0.3
The SNMP trap is generated when the ring topology in the subscriber EoC port is found.
               hwRingCheckAlarmWarningTrapsPrefix 1.3.6.1.4.1.2011.5.21.3.1.1
                   hwRingCheckPortRingWarningTrap 1.3.6.1.4.1.2011.5.21.3.1.1.1
The SNMP trap is generated when the ring topology in the subscriber port is found.
                   hwRingCheckXponPortRingWarningTrap 1.3.6.1.4.1.2011.5.21.3.1.1.2
The SNMP trap is generated when the ring topology in the subscriber xPON port is found.
                   hwRingCheckEocPortRingWarningTrap 1.3.6.1.4.1.2011.5.21.3.1.1.3
The SNMP trap is generated when the ring topology in the subscriber EoC port is found.
                   hwRingCheckPortRingClearedTrap 1.3.6.1.4.1.2011.5.21.3.1.1.4
The SNMP trap is generated when the ring topology in the subscriber port is cleared.
                   hwRingCheckXponPortRingClearedTrap 1.3.6.1.4.1.2011.5.21.3.1.1.5
The SNMP trap is generated when the ring topology in the subscriber xPON port is cleared.
                   hwRingCheckEocPortRingClearedTrap 1.3.6.1.4.1.2011.5.21.3.1.1.6
The SNMP trap is generated when the ring topology in the subscriber EoC port is cleared.