HUAWEI-MSTP-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-MSTP-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, P-BRIDGE-MIB, HUAWEI-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwL2Mgmt 1.3.6.1.4.1.2011.5.25.42
       hwMstp 1.3.6.1.4.1.2011.5.25.42.4
This module include the information about MSTP protocol in the bridge. The information can be read and some of them can be set.
           hwMstpObjects 1.3.6.1.4.1.2011.5.25.42.4.1
               hwMstpStatus 1.3.6.1.4.1.2011.5.25.42.4.1.1 hwmstpenabledstatus read-write
Whether the Bridge MSTP is enabled. Enable indicate that MSTP enable in the bridge; Disabled indicate that MSTP disable in the bridge. By default, the Bridge MSTP is disabled.
               hwMstpForceVersion 1.3.6.1.4.1.2011.5.25.42.4.1.2 integer read-write
The mode of this Bridge spanning-tree protocol. At present, the bridge hold out STP compatible mode and MSTP . User can set the mode by command line. By default, the mode is MSTP. Enumeration: 'mstp': 3, 'stp': 0, 'rstp': 2.
               hwMstpDiameter 1.3.6.1.4.1.2011.5.25.42.4.1.3 integer32 read-write
The diameter of Bridge. It stands for the scope of the network. It affects the time that include hello time, forward delay time, maxage. Every bridge can set the diameter of Bridge, and it is effective when the bridge is root bridge. Effective in the CIST By default, the diameter is 7. The value of hwMstpDiameter is only unused(65535) when it is read.
               hwMstpBridgeMaxHops 1.3.6.1.4.1.2011.5.25.42.4.1.4 integer32 read-write
The maximum value of the Bridge hops. It can limit the scope of the bridge network. It is effective when the bridge is root bridge. The BPDU that the bridge receives from the Designed bridge will be dropped when the hops in the BPDU is zero . By default, the value is 20.
               hwMstpMasterBridgeID 1.3.6.1.4.1.2011.5.25.42.4.1.5 bridgeid read-only
The Bridge Identifier of the current Master Bridge. It is the root Bridge Identifier of the instance 0 in the region.
               hwMstpMasterPathCost 1.3.6.1.4.1.2011.5.25.42.4.1.6 integer32 read-only
The CIST path cost from the transmitting Bridge to the Master Bridge. By default, the value is 0.
               hwMstpBpduGuard 1.3.6.1.4.1.2011.5.25.42.4.1.7 hwmstpenabledstatus read-write
Whether the Bridge BPDU Guard function is enabled. If the function is enabled, the port will shutdown when received BPDU and the port is configured as edgeport. The purpose of the function is to prevent the bridge from BPDU attacking. By default, the function is disabled
               hwMstpAdminFormatSelector 1.3.6.1.4.1.2011.5.25.42.4.1.8 integer32 read-only
The administrative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s. By default, the value is 0
               hwMstpAdminRegionName 1.3.6.1.4.1.2011.5.25.42.4.1.9 octet string read-write
This MSTP administrative region name. It changes to hwMstpOperRegionName when user use the activing command to active the configuration of the region.
               hwMstpAdminRevisionLevel 1.3.6.1.4.1.2011.5.25.42.4.1.10 integer32 read-write
This MSTP administrative revision level. It changes to hwMstpOperRevisionLevel when user use the activing command to active the configuration of the region. By default, the value is 0.
               hwMstpOperFormatSelector 1.3.6.1.4.1.2011.5.25.42.4.1.11 integer32 read-only
The operative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s. By default, the value is 0.
               hwMstpOperRegionName 1.3.6.1.4.1.2011.5.25.42.4.1.12 octet string read-only
This MSTP operative region name. It can be used to determine whether the region is the same region with the mapping between VLAN and instance and hwMstpOperRevisionLevel.
               hwMstpOperRevisionLevel 1.3.6.1.4.1.2011.5.25.42.4.1.13 integer32 read-only
This MSTP operative revision level. It can be used to determine whether the region is the same region with the mapping between VLAN and instance and hwMstpOperRegionName. By default, the value is 0
               hwMstpRegionConfActive 1.3.6.1.4.1.2011.5.25.42.4.1.14 integer read-write
Active the region configuration. Generally, the value of the hwMstpRegionConfActive is disable, but the value will be set as enable if Net Manager want to active the configure of the region in the bridge. And then all manager configuration will change to operable configuration. The value of hwMstpRegionConfActive is only disable when it is read. It is only enable when it is set. Enumeration: 'enable': 1, 'disable': 2.
               hwMstpDefaultVlanAllo 1.3.6.1.4.1.2011.5.25.42.4.1.15 integer read-write
Set default configuration about VLAN allocation and all VLANs are mapped to CIST. The value of hwMstpDefaultVlanAllo is only unused(65535) when it is read. It is only enable(1) when it is set. Enumeration: 'unused': 65535, 'enable': 1.
               hwMstpDefaultRegionName 1.3.6.1.4.1.2011.5.25.42.4.1.16 integer read-write
Set default region name. The value of hwMstpDefaultRegionName is only unused(65535) when it is read. It is only reset(1) when it is set. Enumeration: 'reset': 1, 'unused': 65535.
               hwMstpPathCostStandard 1.3.6.1.4.1.2011.5.25.42.4.1.17 integer read-write
Path cost standard of the bridge. Value dot1d-1998 is IEEE 802.1d standard in 1998, value dot1t is IEEE 802.1t standard, and value legacy is a private legacy standard. The default path cost standard is 2(IEEE 802.1t standard). Enumeration: 'dot1d-1998': 1, 'dot1t': 2, 'legacy': 3.
               hwMstpVIDAllocationTable 1.3.6.1.4.1.2011.5.25.42.4.1.18 no-access
The table includes the information of the VLAN with relation to the instance of MSTP.
                     hwMstpVIDAllocationEntry 1.3.6.1.4.1.2011.5.25.42.4.1.18.1 no-access
The table includes the information of the VLAN with relation to the instance of MSTP. The index of the table is vlanid. Default, the VLAN is in the CIST.
                         hwMstpVID 1.3.6.1.4.1.2011.5.25.42.4.1.18.1.1 integer32 no-access
VLAN Identifier.
                         hwMstpAdminMstID 1.3.6.1.4.1.2011.5.25.42.4.1.18.1.2 integer32 read-only
Administrative Multiple spanning-tree instance Identifier. The relation between VLAN and Multiple spanning-tree instance is set by operation in the region, but it isn't effective if the configuration isn't actived. The scope of instance identifier is different, some versions are 0 to 48.
                         hwMstpOperMstID 1.3.6.1.4.1.2011.5.25.42.4.1.18.1.3 integer32 read-only
Operative Multiple spanning-tree instance Identifier. The relation between VLAN and Multiple spanning-tree instance is effective in the bridge. The scope of instance identifier is different, some versions are 0 to 48.
               hwMstpInstanceTable 1.3.6.1.4.1.2011.5.25.42.4.1.19 no-access
The table includes the information of the instance.
                     hwMstpInstanceEntry 1.3.6.1.4.1.2011.5.25.42.4.1.19.1 no-access
The table includes the information of the instance. The index of the table is Multiple spanning-tree instance Identifier.
                         hwMstpInstanceID 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.1 integer32 no-access
Multiple spanning-tree instance Identifier. The scope of instance identifier is different, some versions are 0 to 48.
                         hwMstpiBridgeID 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.2 bridgeid read-only
The Bridge Identifier for the spanning tree instance identified by MSTID.
                         hwMstpiBridgePriority 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.3 integer32 read-only
The Bridge Priority for the spanning tree instance identified by MSTID. Step of 4096.For example, we can set the Priority of the bridge such as 0, 4096, 8192 etc. It can be used to determined whether the bridge is the root of the spanning tree.
                         hwMstpiDesignedRoot 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.4 bridgeid read-only
The Bridge Identifier of the Root Bridge for the spanning tree instance identified by MSTID.
                         hwMstpiRootPathCost 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.5 integer32 read-only
The path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by MSTID.
                         hwMstpiRootPort 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.6 integer32 read-only
The root port for the spanning tree instance identified by the MSTID.
                         hwMstpiRootType 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.7 integer read-only
Config this Bridge as a primary root or secondary root / cancel the root for this spanning tree instance identified by MSTID. The current value of the hwMstpiRootType is the value that was set recently. Enumeration: 'secondary': 1, 'primary': 2, 'normal': 0.
                         hwMstpiRemainingHops 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.8 integer32 read-only
The remaining hops of the spanning tree instance identified by MSTID.
                         hwMstpiAdminMappedVlanListLow 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.9 octet string read-only
The lower part of administrative VLAN list mapped to the spanning tree instance identified by MSTID.
                         hwMstpiAdminMappedVlanListHigh 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.10 octet string read-only
The higher part of administrative VLAN list mapped to the spanning tree instance identified by MSTID.
                         hwMstpiOperMappedVlanListLow 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.11 octet string read-only
The lower part of operative VLAN list mapped to the spanning tree instance identified by MSTID.
                         hwMstpiOperMappedVlanListHigh 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.12 octet string read-only
The higher part of operative VLAN list mapped to the spanning tree instance identified by MSTID.
                         hwMstpiRowStatus 1.3.6.1.4.1.2011.5.25.42.4.1.19.1.13 rowstatus read-only
To band MSTI and VLAN List. Operation of CreateAndGo can be used to create a new instance, and operation of Destroy be used to destroy an existent instance. But these operation won't be effective if they are not actived by executing command of active region-configuration or setting mib node of hwMstpRegionConfActive.
               hwMstpPortTable 1.3.6.1.4.1.2011.5.25.42.4.1.20 no-access
The table includes the information of the port of the multiple spanning tree instance.
                     hwMstpPortEntry 1.3.6.1.4.1.2011.5.25.42.4.1.20.1 no-access
The table includes the information of the port of the multiple spanning tree instance. The index of the table is the aggregation of multiple spanning tree instance identifier and port index.
                         hwMstpiPortIndex 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.1 integer32 no-access
The index of the bridge port.
                         hwMstpiState 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.2 integer read-only
The current state of the port. It must be disabled, discarding, learning or forwarding. Enumeration: 'disabled': 1, 'discarding': 2, 'forwarding': 5, 'learning': 4.
                         hwMstpiPortPriority 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.3 integer32 read-write
The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mstiPortIndex. And step of 16. It is the priority of the port in the multiple spanning tree instance, and it can be used to determine the role of the port in the multiple spanning tree.
                         hwMstpiPathCost 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.4 integer32 read-write
the path cost of paths with which the package passes the port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard.
                         hwMstpiDesignatedRoot 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.5 bridgeid read-only
The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID
                         hwMstpiDesignatedCost 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.6 integer32 read-only
The path cost of the designated port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge BPDUs.
                         hwMstpiDesignatedBridge 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.7 bridgeid read-only
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
                         hwMstpiDesignatedPort 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.8 octet string read-only
The port Identifier of the port on the Designated Bridge for this port's segment.
                         hwMstpiStpPortEdgeport 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.9 integer read-write
Whether the port fast is enabled. By default, there is no configuration on the port. When the port is the edge port, it can change to forwarding state . We can set the value. Disable indicates that we make the port not to be a edge port. Enable indicates that we make the port to be a edge port. The port's edge port state is same in all instance of MSTP. When set the value, the hwMstpInstanceID must be 0. Enumeration: 'enable': 2, 'disable': 1, 'undo': 3.
                         hwMstpiStpPortPointToPoint 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.10 integer read-write
Whether the port connects the point to point link. If user set the port as a point to point port, the port is a point to point port in all instance of the MSTP. If user set the port as a point to point port but the port isn't, the mstp may import temporary loop. So user can use the default. When set the value, the hwMstpInstanceID must be 0. Enumeration: 'forceFalse': 2, 'forceTrue': 1, 'auto': 3.
                         hwMstpiStpMcheck 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.11 integer read-write
When root interface is changed from STP mode to MSTP mode, the appointed interface can not switch to MSTP mode automatically. At the time, you need switch to MSTP mode with hand by set Mcheck value to enable(1). The value of hwMstpiStpMcheck is unused(65535) when it is read.The value of hwMstpiStpMcheck must be enable(1) when it is set. When set the value, the hwMstpInstanceID must be 0. Enumeration: 'unused': 65535, 'enable': 1.
                         hwMstpiStpTransLimit 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.12 integer32 read-write
The value is used to set BPDU maximum transmission rate of the port . When the value is set, the hwMstpInstanceID must be 0. If value is set 0, the transmit limit of the port is equal to the hwMstpTransmitLimitDefault value.
                         hwMstpiStpRXStpBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.13 counter32 read-only
The number of received Config BPDU. Effective in CIST.
                         hwMstpiStpTXStpBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.14 counter32 read-only
The number of transmitted Config BPDU. Effective in CIST.
                         hwMstpiStpRXTCNBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.15 counter32 read-only
The number of received TCN BPDU. Effective in CIST.
                         hwMstpiStpTXTCNBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.16 counter32 read-only
The number of transmitted TCN BPDU. Effective in CIST.
                         hwMstpiStpRXRSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.17 counter32 read-only
The number of received RST BPDU. Effective in CIST.
                         hwMstpiStpTXRSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.18 counter32 read-only
The number of transmitted RST BPDU. Effective in CIST.
                         hwMstpiStpRXMSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.19 counter32 read-only
The number of received MST BPDU. Effective in CIST.
                         hwMstpiStpTXMSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.20 counter32 read-only
The number of transmitted MST BPDU. Effective in CIST.
                         hwMstpiStpClearStatistics 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.21 integer read-write
Clear the spanning tree statistic. Effective in CIST. The value of hwMstpiStpClearStatistics is unused(65535) when it is read. The value of hwMstpiStpClearStatistics must be clear(1) when it is set. Enumeration: 'unused': 65535, 'clear': 1.
                         hwMstpiStpDefaultPortCost 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.22 integer read-write
Set default port path cost. The value of hwMstpiStpDefaultPortCost is unused(65535) when it is read. The value of hwMstpiStpDefaultPortCost must be reset(1) when it is set. Enumeration: 'reset': 1, 'unused': 65535.
                         hwMstpiStpStatus 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.23 hwmstpenabledstatus read-write
Whether the spanning tree protocol is enabled on this port. Effective in CIST. When set the value, the hwMstpInstanceID must be 0.
                         hwMstpiPortRootGuard 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.24 hwmstpenabledstatus read-write
Whether the root guard is enabled. The function is to prevent the port from receiving the BPDU , the priority of which is above the priority of the port. When set the value, the hwMstpInstanceID must be 0.
                         hwMstpiPortLoopGuard 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.25 hwmstpenabledstatus read-write
Whether the loop protection is enabled. When set the value, the hwMstpInstanceID must be 0.
                         hwMstpPortCompliance 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.26 integer read-write
The value of this object identifies the protocol format of the MSTP packet sent and received on the port. The protocol format can be one of the following: 1: auto (the self-adaptive protocol format) 2: dotls (the standard IEEE 802.1s format) 3: legacy (the private protocol format) By default, the protocol format of the MSTP packet is self-adaptive, that is, auto(1). Enumeration: 'auto': 1, 'legacy': 3, 'dotls': 2.
                         hwMstpConfigDigestSnooping 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.27 hwmstpenabledstatus read-write
This object indicates whether the digest snooping function is enabled on the port: 1: enabled 2: disabled By default, the function is not enabled. In other words, the default value is disabled(2).
                         hwMstpNoAgreementCheck 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.30 hwmstpenabledstatus read-write
Whether enhance agreement is enabled. When Huawei datacomm devices running the VRP are internetworking with non-Huawei devices, you need to enable this on Huawei devices to configure the mode of the fast transition mechanism the same as that on non-Huawei devices.
                         hwMstpPortTCNotify 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.31 hwmstpenabledstatus read-write
The main interface notifies its sub-interfaces to update MAC entries and ARP entries after receiving a TC message. This prevents services from being interrupted.
                         hwMstpiStpPortBpduFilter 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.32 integer read-write
Whether the port BPDU-filter is enabled. By default, there is no configuration on the port. The port will not send or receive BPDUs. Enumeration: 'enable': 2, 'disable': 1, 'undo': 3.
                         hwMstpiPortRole 1.3.6.1.4.1.2011.5.25.42.4.1.20.1.33 integer read-only
Indicates the port role on a particular instance. Enumeration: 'backup': 3, 'alternate': 2, 'designated': 5, 'disabled': 1, 'master': 6, 'root': 4.
               hwMstpSnooping 1.3.6.1.4.1.2011.5.25.42.4.1.21 integer read-write
when the device's interface receive TCN, the servers is normal in device where MSTP is disable. By default, the value is disabled. Enumeration: 'enable': 1, 'disable': 2.
               hwMstpAccessoryTable 1.3.6.1.4.1.2011.5.25.42.4.1.22 no-access
The table of MSTP Accessory Information.
                     hwMstpAccessoryEntry 1.3.6.1.4.1.2011.5.25.42.4.1.22.1 no-access
The table entry of MSTP Accessory Information.
                         hwMstpAccessoryIndex 1.3.6.1.4.1.2011.5.25.42.4.1.22.1.1 integer32 no-access
The index of the Accessory Commands of MSTP.
                         hwMstpBackupReplyAgreement 1.3.6.1.4.1.2011.5.25.42.4.1.22.1.2 integer read-write
When the port of device, which played the backup or alternate role, receives the BPDU message with high priority, and the proposal flag of this message was set. The BPDU message can be send from this port immediately, the agreement flag was set of this BPDU message. Enumeration: 'enable': 1, 'disable': 2.
                         hwMstpStpNoAgreementCheck 1.3.6.1.4.1.2011.5.25.42.4.1.22.1.3 integer read-write
when the port is root, calculating allsyned without check syned flag of root. Enumeration: 'enable': 1, 'disable': 2.
               hwMstpProTable 1.3.6.1.4.1.2011.5.25.42.4.1.23 no-access
The MSTP process information table.
                     hwMstpProEntry 1.3.6.1.4.1.2011.5.25.42.4.1.23.1 no-access
Entry of the MSTP process information table.
                         hwMstpProID 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.1 integer32 no-access
MSTP process identifier.
                         hwMstpProStpState 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.4 hwmstpenabledstatus read-only
Whether Spannting-Tree is enabled or not on a MSTP process.
                         hwMstpProPriority 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.5 integer32 read-only
The priority for the MSTP process spanning tree, step of 4096. For example, we can set the Priority of the bridge such as 0, 4096, 8192 etc. It can be used to determined whether the process is the root of the whole spanning tree. The default value is 32768.
                         hwMstpProRootType 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.6 integer read-only
Config this MSTP process as a primary root, secondary root or cancel the root for spanning tree. The default value is not a primary or secondary root. Enumeration: 'secondary': 1, 'primary': 2, 'normal': 0.
                         hwMstpProForceVersion 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.7 integer read-only
Mode of Spanning-Tree portocol on a MSTP process. Enumeration: 'mstp': 3, 'stp': 0, 'rstp': 2.
                         hwMstpProBpduGuard 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.8 hwmstpenabledstatus read-only
Whether BPDU portection is enabled or not on a MSTP process.
                         hwMstpProDiameter 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.9 integer32 read-only
The Spanning-Tree diameter of a MSTP process, the default value is 7. The value of hwMstpProDiameter is only unused(65535) when it is read.
                         hwMstpProConvergeMode 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.10 integer read-only
Spanning-Tree converge mode. When the mode is fast, MAC entries and ARP entries will be deleted. When the mode is normal, the entries will be aged. Enumeration: 'fast': 1, 'normal': 2.
                         hwMstpProMaxHops 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.11 integer32 read-only
Maxhops of a MSTP process, the default value is 20.
                         hwMstpProMCheck 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.12 integer read-only
Whether to do Mcheck function on a MSTP process. Enumeration: 'unused': 65535, 'enabled': 1.
                         hwMstpProPathCostStandard 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.13 integer read-only
Path cost standard of a MSTP process, the fault value is dot1t. Enumeration: 'dot1d-1998': 1, 'dot1t': 2, 'legacy': 3.
                         hwMstpProHelloTime 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.14 integer32 read-only
Hello time of a MSTP process, the default value is 200 centiseconds.
                         hwMstpProFwdDelay 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.15 integer32 read-only
Forward delay of a MSTP process, the default value is 1500 centiseconds.
                         hwMstpProMaxAge 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.16 integer32 read-only
Max age of a MSTP process, the default value is 2000 centiseconds.
                         hwMstpProTimerFactor 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.17 integer32 read-only
Timer factor, which is used in loop protection, the default value is 3.
                         hwMstpProTCNotify 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.18 octet string read-only
The current MSTP process notifies the specified STP instance in MSTP process 0 to update MAC entries and ARP entries after receiving a TC message. This prevents services from being interrupted.
                         hwMstpProNoLinkSharePortList 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.19 octet string read-only
The port list participates in the status calculation of a specified MSTP process witch no-link-share method.
                         hwMstpProLinkSharePortList 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.20 octet string read-only
The port list participates in the status calculation of a specified MSTP process witch link-share method.
                         hwMstpProTcGuard 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.21 hwmstpenabledstatus read-only
Whether the TC protection function is enabled on the MSTP process. If the function is enabled, the TC message exceeded threshold will be defered to deal with at the end of TC protection time.
                         hwMstpProTcGuardThreshold 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.22 integer32 read-only
The threshold of the TC protection on the MSTP process. It decided the maximum TC messages can be dealt with in a TC protection time.
                         hwMstpProTcNotifyProcess 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.23 enabledstatus read-only
Whether the current MSTP process notifies MSTP process 0 to update MAC entries and ARP entries after receiving a TC message.
                         hwMstpProRegionConfActive 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.24 enabledstatus read-only
Active the region configuration. Generally, the value of the hwMstpProRegionConfActive is disable, but the value will be set as enable if Net Manager want to active the configure of the region in the bridge. And then all manager configuration will change to operable configuration. The value of hwMstpRegionConfActive is only disable when it is read. It is only enable when it is set.
                         hwMstpProLinkShareGuard 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.25 enabledstatus read-only
Whether the Link-share Guard function is enabled on the MSTP process. If the function is enabled, the root Guard function will also work on port in all instance besides instance 0, when the link between the ports either of which is in Link_share mode broken down.
                         hwMstpConfigDegist 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.26 octet string read-only
This MSTP region-configuration digest. It can be used to determine whether the region is the same region with another one.
                         hwMstpProRegionConfShare 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.27 enabledstatus read-only
Suggesting that whether all the process will share the same Region-config with process 0. If the function is enable, all the existing process will share the same Region-config with process 0.
                         hwMstpProRowStatus 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.30 rowstatus read-only
MSTP process table rowstatus.
                         hwMstpProTcGuardInterval 1.3.6.1.4.1.2011.5.25.42.4.1.23.1.31 integer32 read-write
The value is the tc-protection interval time. If the value is set 0, the tc guard interval value is euqal to the hello time.
               hwMstpPortBindTable 1.3.6.1.4.1.2011.5.25.42.4.1.24 no-access
The port bind table.
                     hwMstpPortBindEntry 1.3.6.1.4.1.2011.5.25.42.4.1.24.1 no-access
The port bind entry.
                         hwMstpPortId1 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.1 integer32 no-access
The port external port index.
                         hwMstpPortId2 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.2 integer32 no-access
The port external port index.
                         hwMstpPortId3 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.3 integer32 no-access
The port external port index.
                         hwMstpPortId4 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.4 integer32 no-access
The port external port index.
                         hwMstpPortIdFlag 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.5 integer32 no-access
The port type.
                         hwMstpPortVlanListLow 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.6 octet string read-only
The VLAN list of port.
                         hwMstpPortVlanListHigh 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.7 octet string read-only
The VLAN list of port.
                         hwMstpProNewPortType 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.8 integer read-only
An interface to participate in the status calculation of link-share , no-link-share or no-link-share with VLAN Spanning Tree processes. Enumeration: 'linkshare': 3, 'nolinksharewithvlan': 4, 'nolinkshare': 2, 'normal': 1.
                         hwMstpProNewPortBpduVlan 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.9 integer32 read-only
The VLAN of port is BPDU VLAN.
                         hwMstpPortBindRowStatus 1.3.6.1.4.1.2011.5.25.42.4.1.24.1.100 rowstatus read-only
MSTP port binding table rowstatus.
               hwMstpProPortTable 1.3.6.1.4.1.2011.5.25.42.4.1.25 no-access
The table includes the information of the port of the MSTP process.
                     hwMstpProPortEntry 1.3.6.1.4.1.2011.5.25.42.4.1.25.1 no-access
The entry of the MSTP process port information table.
                         hwMstpProPortState 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.2 integer read-only
The current state of the port in MSTP process. It must be disabled, discarding, learning or forwarding. Enumeration: 'disabled': 1, 'discarding': 2, 'forwarding': 5, 'learning': 4.
                         hwMstpProPortPriority 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.3 integer32 read-write
The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of hwMstpiPortIndex. And step of 16. It is the priority of the port in the MSTP process, and it can be used to determine the role of the port in the MSTP process Spanning Tree.
                         hwMstpProPortPathCost 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.4 integer32 read-write
The path cost of paths with which the package passes the port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard.
                         hwMstpProPortDesignatedRoot 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.5 bridgeid read-only
The Bridge Identifier of the Root Bridge for the port of the MSTP process Spanning Tree.
                         hwMstpProPortDesignatedCost 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.6 integer32 read-only
The path cost of the designated port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge BPDUs.
                         hwMstpProPortDesignatedBridge 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.7 bridgeid read-only
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
                         hwMstpProPortDesignatedPort 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.8 octet string read-only
The Port Identifier of the port on the Designated Bridge for this port's segment.
                         hwMstpProPortStpEdgeport 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.9 hwmstpenabledstatus read-write
Whether the port fast is enabled in the MSTP process. When the port is the edge port, it can change to forwarding state immediately.
                         hwMstpProPortStpPointToPoint 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.10 integer read-write
Whether the port connects the point to point link. If user set the port as a point to point port, the port is a point to point port in the MSTP process. If user set the port as a point to point port but the port isn't, the mstp may import temporary loop. So user can use the default. Enumeration: 'forceFalse': 2, 'forceTrue': 1, 'auto': 3.
                         hwMstpProPortStpMcheck 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.11 integer read-write
When root interface is changed from STP mode to RSTP or MSTP mode, the appointed interface can not switch to RSTP or MSTP mode automatically. At the time, you need switch back with hand by set Mcheck value to enable(1). The value unused(65535) when it is read. Enumeration: 'unused': 65535, 'enable': 1.
                         hwMstpProPortStpTransLimit 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.12 integer32 read-write
The value used by the port transmit state machine to limit the maximum transmission rate.
                         hwMstpProPortStpRXStpBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.13 counter32 read-only
The number of received Config BPDUs.
                         hwMstpProPortStpTXStpBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.14 counter32 read-only
The number of transmitted Config BPDUs.
                         hwMstpProPortStpRXTCNBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.15 counter32 read-only
The number of received TCN BPDUs.
                         hwMstpProPortStpTXTCNBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.16 counter32 read-only
The number of transmitted TCN BPDUs.
                         hwMstpProPortStpRXRSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.17 counter32 read-only
The number of received RST BPDUs.
                         hwMstpProPortStpTXRSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.18 counter32 read-only
The number of transmitted RST BPDUs.
                         hwMstpProPortStpRXMSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.19 counter32 read-only
The number of received MST BPDUs.
                         hwMstpProPortStpTXMSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.20 counter32 read-only
The number of transmitted MST BPDUs.
                         hwMstpProPortStpClearStatistics 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.21 integer read-write
Clear the Spanning Tree statistics in specified MSTP process. The value is unused(65535) when it is read. The value must be clear(1) when it is set. Enumeration: 'unused': 65535, 'clear': 1.
                         hwMstpProPortStpDefaultPortCost 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.22 integer read-write
Set default port path cost. Enumeration: 'reset': 1, 'unused': 65535.
                         hwMstpProPortStpStatus 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.23 hwmstpenabledstatus read-write
Whether the Spanning Tree Protocol is enabled on this port.
                         hwMstpProPortRootGuard 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.24 hwmstpenabledstatus read-write
Whether the root guard is enabled. The function is to prevent the port from receiving the BPDUs, the priority of which is above the priority of the port.
                         hwMstpProPortLoopGuard 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.25 hwmstpenabledstatus read-write
Whether the loop protection is enabled.
                         hwMstpProPortCompliance 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.26 integer read-write
The value of this object identifies the protocol format of the MSTP packet sent and received on the port. The protocol format can be one of the following: 1: auto (the self-adaptive protocol format) 2: dotls (the standard IEEE 802.1s format) 3: legacy (the private protocol format) By default, the protocol format of the MSTP packet is self-adaptive, that is, auto(1). Enumeration: 'auto': 1, 'legacy': 3, 'dotls': 2.
                         hwMstpProPortConfigDigestSnooping 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.27 hwmstpenabledstatus read-write
This object indicates whether the digest snooping function is enabled on the port: 1: enabled 2: disabled By default, the function is not enabled. In other words, the default value is disabled(2).
                         hwMstpProPortNoAgreementCheck 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.30 hwmstpenabledstatus read-write
Whether enhance agreement is enabled. When Huawei datacomm devices running the VRP are internetworking with non-Huawei devices, you need to enable this on Huawei devices to configure the mode of the fast transition mechanism the same as that on non-Huawei devices.
                         hwMstpProPortTCNotify 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.31 hwmstpenabledstatus read-write
The main interface notifies its sub-interfaces to update MAC entries and ARP entries after receiving a TC message. This prevents services from being interrupted.
                         hwMstpProPortType 1.3.6.1.4.1.2011.5.25.42.4.1.25.1.32 integer read-only
An interface to participate in the status calculation of link-share or no-link-share Spanning Tree processes. Enumeration: 'linkshare': 2, 'none': 0, 'nolinkshare': 1.
               hwMstpTcGuard 1.3.6.1.4.1.2011.5.25.42.4.1.26 hwmstpenabledstatus read-write
Whether the Bridge TC Guard function is enabled. If the function is enabled, the TC message in each instance exceeded threshold will be defered to deal with at the end of TC protection time. By default, the function is disabled.
               hwMstpTcGuardThreshold 1.3.6.1.4.1.2011.5.25.42.4.1.27 integer32 read-write
The threshold of the Bridge TC Guard. It decided the maximum TC message in each instance can be dealt with in a TC protection time.
               hwMstpProInstanceTable 1.3.6.1.4.1.2011.5.25.42.4.1.28 no-access
                     hwMstpProInstanceEntry 1.3.6.1.4.1.2011.5.25.42.4.1.28.1 no-access
The entry of the MSTP process instance information table.
                         hwMstpProInstanceBridgeID 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.1 bridgeid read-only
The Bridge Identifier for the spanning tree instance identified by MSTID.
                         hwMstpProInstanceBridgePriority 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.2 integer32 read-only
The Bridge Priority for the spanning tree instance identified by MSTID. Step of 4096.For example, we can set the Priority of the bridge such as 0, 4096, 8192 etc. It can be used to determined whether the bridge is the root of the spanning tree.
                         hwMstpProInstanceDesignedRoot 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.3 bridgeid read-only
The Bridge Identifier of the Root Bridge for the spanning tree instance identified by MSTID.
                         hwMstpProInstanceRootPathCost 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.4 integer32 read-only
The path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by MSTID.
                         hwMstpProInstanceRootPort 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.5 integer32 read-only
The root port for the spanning tree instance identified by the MSTID.
                         hwMstpProInstanceRootType 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.6 integer read-only
Config this Bridge as a primary root or secondary root / cancel the root for this spanning tree instance identified by MSTID. The current value of the hwMstpiRootType is the value that was set recently. Enumeration: 'secondary': 1, 'primary': 2, 'normal': 0.
                         hwMstpProInstanceRemainingHops 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.7 integer32 read-only
The remaining hops of the spanning tree instance identified by MSTID.
                         hwMstpProInstanceAdminMappedVlanListLow 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.8 octet string read-only
The lower part of administrative VLAN list mapped to the spanning tree instance identified by MSTID.
                         hwMstpProInstanceAdminMappedVlanListHigh 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.9 octet string read-only
The higher part of administrative VLAN list mapped to the spanning tree instance identified by MSTID.
                         hwMstpProInstanceOperMappedVlanListLow 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.10 octet string read-only
The lower part of operative VLAN list mapped to the spanning tree instance identified by MSTID.
                         hwMstpProInstanceOperMappedVlanListHigh 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.11 octet string read-only
The higher part of operative VLAN list mapped to the spanning tree instance identified by MSTID.
                         hwMstpProInstanceRowStatus 1.3.6.1.4.1.2011.5.25.42.4.1.28.1.100 rowstatus read-only
To band MSTI and VLAN List. Operation of CreateAndGo can be used to create a new instance, and operation of Destroy be used to destroy an existent instance. But these operation won't be effective if they are not actived by executing command of active region-configuration or setting mib node of hwMstpRegionConfActive.
               hwMstpProNewPortTable 1.3.6.1.4.1.2011.5.25.42.4.1.29 no-access
The table includes the information of the port of the MSTP process.
                     hwMstpProNewPortEntry 1.3.6.1.4.1.2011.5.25.42.4.1.29.1 no-access
The entry of the MSTP process port information table.
                         hwMstpProNewPortState 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.1 integer read-only
The current state of the port in MSTP process. It must be disabled, discarding, learning or forwarding. Enumeration: 'disabled': 1, 'discarding': 2, 'forwarding': 5, 'learning': 4.
                         hwMstpProNewPortPriority 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.2 integer32 read-write
The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of hwMstpiPortIndex. And step of 16. It is the priority of the port in the MSTP process, and it can be used to determine the role of the port in the MSTP process Spanning Tree.
                         hwMstpProNewPortPathCost 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.3 integer32 read-write
The path cost of paths with which the package passes the port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard.
                         hwMstpProNewPortDesignatedRoot 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.4 bridgeid read-only
The Bridge Identifier of the Root Bridge for the port of the MSTP process Spanning Tree.
                         hwMstpProNewPortDesignatedCost 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.5 integer32 read-only
The path cost of the designated port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge BPDUs.
                         hwMstpProNewPortDesignatedBridge 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.6 bridgeid read-only
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
                         hwMstpProNewPortDesignatedPort 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.7 octet string read-only
The port identifier of the port on the Designated Bridge for this port's segment.
                         hwMstpProNewPortStpEdgeport 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.8 integer read-write
Whether the port fast is enabled in the MSTP process. By default, there is no configuration on the port. When the port is the edge port, it can change to forwarding state immediately. Enumeration: 'enable': 2, 'disable': 1, 'undo': 3.
                         hwMstpProNewPortStpPointToPoint 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.9 integer read-write
Whether the port connects the point to point link. If user set the port as a point to point port, the port is a point to point port in the MSTP process. If user set the port as a point to point port but the port isn't, the mstp may import temporary loop. So user can use the default. Enumeration: 'forceFalse': 2, 'forceTrue': 1, 'auto': 3.
                         hwMstpProNewPortStpMcheck 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.10 integer read-write
When root interface is changed from STP mode to RSTP or MSTP mode, the appointed interface can not switch to RSTP or MSTP mode automatically. At the time, you need switch back with hand by set Mcheck value to enable(1). The value unused(65535) when it is read. Enumeration: 'unused': 65535, 'enable': 1.
                         hwMstpProNewPortStpTransLimit 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.11 integer32 read-write
The value is used to set BPDU maximum transmission rate of the port. If value is set 0, the transmit limit of the port is equal to the wMstpTransmitLimitDefault value
                         hwMstpProNewPortStpRXStpBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.12 counter32 read-only
The number of received Config BPDUs.
                         hwMstpProNewPortStpTXStpBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.13 counter32 read-only
The number of transmitted Config BPDUs.
                         hwMstpProNewPortStpRXTCNBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.14 counter32 read-only
The number of received TCN BPDUs.
                         hwMstpProNewPortStpTXTCNBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.15 counter32 read-only
The number of transmitted TCN BPDUs.
                         hwMstpProNewPortStpRXRSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.16 counter32 read-only
The number of received RST BPDUs.
                         hwMstpProNewPortStpTXRSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.17 counter32 read-only
The number of transmitted RST BPDUs.
                         hwMstpProNewPortStpRXMSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.18 counter32 read-only
The number of received MST BPDUs.
                         hwMstpProNewPortStpTXMSTPBPDU 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.19 counter32 read-only
The number of transmitted MST BPDUs.
                         hwMstpProNewPortStpClearStatistics 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.20 integer read-write
Clear the Spanning Tree statistics in specified MSTP process. The value is unused(65535) when it is read. The value must be clear(1) when it is set. Enumeration: 'unused': 65535, 'clear': 1.
                         hwMstpProNewPortStpDefaultPortCost 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.21 integer read-write
Set default port path cost. Enumeration: 'reset': 1, 'unused': 65535.
                         hwMstpProNewPortStpStatus 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.22 enabledstatus read-write
Whether the Spanning Tree Protocol is enabled on this port.
                         hwMstpProNewPortRootGuard 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.23 enabledstatus read-write
Whether the root guard is enabled. The function is to prevent the port from receiving the BPDUs, the priority of which is above the priority of the port.
                         hwMstpProNewPortLoopGuard 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.24 enabledstatus read-write
Whether the loop protection is enabled.
                         hwMstpProNewPortCompliance 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.25 integer read-write
The value of this object identifies the protocol format of the MSTP packet sent and received on the port. The protocol format can be one of the following: 1: auto (the self-adaptive protocol format) 2: dotls (the standard IEEE 802.1s format) 3: legacy (the private protocol format) By default, the protocol format of the MSTP packet is self-adaptive, that is, auto(1). Enumeration: 'auto': 1, 'legacy': 3, 'dotls': 2.
                         hwMstpProNewPortConfigDigestSnooping 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.26 enabledstatus read-write
This object indicates whether the digest snooping function is enabled on the port: 1: enabled 2: disabled By default, the function is not enabled. In other words, the default value is disabled(2).
                         hwMstpProNewPortNoAgreementCheck 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.27 enabledstatus read-write
Whether enhance agreement is enabled. When Huawei datacomm devices running the VRP are internetworking with non-Huawei devices, you need to enable this on Huawei devices to configure the mode of the fast transition mechanism the same as that on non-Huawei devices.
                         hwMstpProNewPortVplsSubinterfaceEnable 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.28 enabledstatus read-write
The main interface notifies its sub-interfaces to update MAC entries and ARP entries after receiving a TC message. This prevents services from being interrupted.
                         hwMstpProNewPortBpduEncapsulation 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.29 integer read-write
The value of this object identifies the protocol format of the BPDU sent on the port. The protocol format can be one of the following: 1: pvst (the PVST format) 2: stp (the STP format) By default, the BPDU format of the MSTP packet is stp(2). Enumeration: 'pvst': 1, 'stp': 2.
                         hwMstpProNewPortBpduFilter 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.30 integer read-write
Whether the port BPDU-filter is enabled. By default, there is no configuration on the port. The port will not send or receive BPDUs. Enumeration: 'enable': 2, 'disable': 1, 'undo': 3.
                         hwMstpProNewPortStpRXTC 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.31 counter32 read-only
The number of TC BPDUs received by the port.
                         hwMstpProNewPortStpTXTC 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.32 counter32 read-only
The number of TC BPDUs sent by the port.
                         hwMstpProNewPortRole 1.3.6.1.4.1.2011.5.25.42.4.1.29.1.33 integer read-only
Indicates the port role on a particular instance. Enumeration: 'backup': 3, 'alternate': 2, 'designated': 5, 'disabled': 1, 'master': 6, 'root': 4.
               hwMstpEdgedPortDefault 1.3.6.1.4.1.2011.5.25.42.4.1.30 hwmstpenabledstatus read-write
When the stp edged-port default is enabled. By default,the port enabled stp is edged-port .
               hwMstpBpduFilterPortDefault 1.3.6.1.4.1.2011.5.25.42.4.1.31 hwmstpenabledstatus read-write
When the stp BPDU-filter default is enabled. By default,the stp BPDU filter function is enabled .
               hwMstpTransmitLimitDefault 1.3.6.1.4.1.2011.5.25.42.4.1.32 integer32 read-write
The value is used to set BPDU maximum transmission rate of all port in the device.
           hwMstpTraps 1.3.6.1.4.1.2011.5.25.42.4.2
Definition point for Mstp notifications.
               hwMstpiPortStateForwarding 1.3.6.1.4.1.2011.5.25.42.4.2.1
The SNMP trap that is generated when a port turns into forwarding state from other state.
               hwMstpiPortStateDiscarding 1.3.6.1.4.1.2011.5.25.42.4.2.2
The SNMP trap that is generated when a port turns into discarding state from forwarding state.
               hwMstpiBridgeLostRootPrimary 1.3.6.1.4.1.2011.5.25.42.4.2.3
The SNMP trap that is generated when the bridge is no longer the root bridge of the instance. Another switch with higher priority has already been the root bridge of the instance.
               hwMstpiPortRootGuarded 1.3.6.1.4.1.2011.5.25.42.4.2.4
The SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance.
               hwMstpiPortBpduGuarded 1.3.6.1.4.1.2011.5.25.42.4.2.5
The SNMP trap that is generated when an edged port of the BPDU-guard switch receives BPDU packets.
               hwMstpiPortLoopGuarded 1.3.6.1.4.1.2011.5.25.42.4.2.6
The SNMP trap that is generated when an Alternate-Port or Root-Port is aged out.
               hwMstpiEdgePortChanged 1.3.6.1.4.1.2011.5.25.42.4.2.7
When the edged-port receives a BPDU packet, the edged-port attribute will be disabled. Then the SNMP trap is generated.
               hwMstpProPortStateForwarding 1.3.6.1.4.1.2011.5.25.42.4.2.8
The SNMP trap that is generated when a port turns into forwarding state from other state in the MSTP process.
               hwMstpProPortStateDiscarding 1.3.6.1.4.1.2011.5.25.42.4.2.9
The SNMP trap that is generated when a port turns into discarding state from forwarding state in the MSTP process.
               hwMstpProBridgeLostRootPrimary 1.3.6.1.4.1.2011.5.25.42.4.2.10
The SNMP trap that is generated when the bridge is no longer the root bridge of the MSTP process Spanning Tree. Another switch with higher priority has already been the root bridge.
               hwMstpProPortRootGuarded 1.3.6.1.4.1.2011.5.25.42.4.2.11
The SNMP trap that is generated when a root-guard port receives a superior message in the MSTP process.
               hwMstpProPortBpduGuarded 1.3.6.1.4.1.2011.5.25.42.4.2.12
The SNMP trap that is generated when an edged port of the BPDU-guard MSTP process receives BPDU packets.
               hwMstpProPortLoopGuarded 1.3.6.1.4.1.2011.5.25.42.4.2.13
The SNMP trap that is generated when an Alternate-Port or Root-Port is aged out in the MSTP process.
               hwMstpProEdgePortChanged 1.3.6.1.4.1.2011.5.25.42.4.2.14
When the edged-port receives a BPDU packet, the edged-port attribute will be disabled. Then the SNMP trap is generated.
               hwMstpiTcGuarded 1.3.6.1.4.1.2011.5.25.42.4.2.15
The SNMP trap that is generated when an MSTP instance receive TC BPDUs' number exceeds the threshold.
               hwMstpProTcGuarded 1.3.6.1.4.1.2011.5.25.42.4.2.16
The SNMP trap that is generated when an MSTP process receive TC BPDUs' number exceeds the threshold.
               hwMstpProRootChanged 1.3.6.1.4.1.2011.5.25.42.4.2.17
The SNMP trap that is generated when the root bridge of an instance of a MSTP process changed
               hwMstpProNewPortStateForwarding 1.3.6.1.4.1.2011.5.25.42.4.2.18
Specify that the status of the port STP becomes Forwarding in MSTP process.
               hwMstpProNewPortStateDiscarding 1.3.6.1.4.1.2011.5.25.42.4.2.19
Specify that the status of the port STP becomes Discarding in MSTP process.
               hwMstpProNewBridgeLostRootPrimary 1.3.6.1.4.1.2011.5.25.42.4.2.20
Specify that the switch loses the position of root bridge in MSTP process.
               hwMstpProNewPortRootGuarded 1.3.6.1.4.1.2011.5.25.42.4.2.21
Specify that a designated port receives a BPDU packet with the priority higher than that of the root bridge when root bridge protection is enabled in MSTP process.
               hwMstpProNewPortBpduGuarded 1.3.6.1.4.1.2011.5.25.42.4.2.22
Specify that the edge port receives the BPDU packets when BPDU protection was enabled in MSTP process.
               hwMstpProNewPortLoopGuarded 1.3.6.1.4.1.2011.5.25.42.4.2.23
Specify that the root port has not received any BPDU packets for a long time when loop protection is enabled in MSTP process.
               hwMstpProNewEdgePortChanged 1.3.6.1.4.1.2011.5.25.42.4.2.24
Specify that the edge port is invalid because of receiving a BPDU packet.
               hwMstpProLoopbackDetected 1.3.6.1.4.1.2011.5.25.42.4.2.25
When port detected loopback, block the port and arise trap.
           hwMstpConformance 1.3.6.1.4.1.2011.5.25.42.4.3
               hwMstpGroups 1.3.6.1.4.1.2011.5.25.42.4.3.1
                   hwMstpBridgeInfoGroup 1.3.6.1.4.1.2011.5.25.42.4.3.1.1
A collection of objects indicating the necessary capabilites of the bridge device which is running the multi spanning tree protocol.
                   hwMstpVlanInfoGroup 1.3.6.1.4.1.2011.5.25.42.4.3.1.2
A collection of objects describes the attribute of the VLAN in the multi spanning tree protocol. They are necessary to find the relation between VLAN and instance by the VLAN identifier.
                   hwMstpInstanceInfoGroup 1.3.6.1.4.1.2011.5.25.42.4.3.1.3
A collection of objects describes the attribute of the instance in the multi spanning tree protocol.
                   hwMstpPortInfoGroup 1.3.6.1.4.1.2011.5.25.42.4.3.1.4
A collection of objects is necessary to show the information of the port in the bridge in the multi spanning tree protocol.
                   hwMstpAccessoryGroup 1.3.6.1.4.1.2011.5.25.42.4.3.1.5
MSTP accessory group.
                   hwMstpNotificationGroup 1.3.6.1.4.1.2011.5.25.42.4.3.1.6
Notification.
                   hwMstpProGroup 1.3.6.1.4.1.2011.5.25.42.4.3.1.7
MSTP process group.
                   hwMstpProPortInfoGroup 1.3.6.1.4.1.2011.5.25.42.4.3.1.8
A collection of objects is necessary to show the information of the port in the bridge in the multi spanning tree protocol.
                   hwMstpProNotificationGroup 1.3.6.1.4.1.2011.5.25.42.4.3.1.9
MSTP process notification.
                   hwMstpProInstanceInfoGroup 1.3.6.1.4.1.2011.5.25.42.4.3.1.10
MSTP process instance group.
               hwMstpCompliances 1.3.6.1.4.1.2011.5.25.42.4.3.2
                   hwMstpCompliance 1.3.6.1.4.1.2011.5.25.42.4.3.2.1
The compliance statement for device support of Priority and Multicast Filtering extended bridging services.